run-tests: no longer pass a TestRunner into Test.__init__ We no longer access any attributes on TestRunner besides options, so we stop passing a TestRunner to Test.__init__ and now pass the options data structure instead. Subsequent patches will move accessed options attributes into named arguments.

run-tests: pass abort into Test.__init__

run-tests: pass temp dir into Test.__init__ This patch starts a mini series of moving arguments to Test.__init__ from semi-complex data structures (such as the command options) to named arguments. This will allow Test instances to be more easily instantiated from other contexts. This improves the ability to run Mercurial tests in new and different environments.

update: show message when a bookmark is activated by update When updating to a bookmark, mention that the bookmark is now active. This is a reminder that update does not move the current bookmark if an explicit target is given - instead it activates that target.

run-tests: pass a full test path into Test.__init__ Previously, a Test's path came from the base directory of all tests and a filename leaf. There is not a strong reason why an absolute test path can not be specified. This change isn't strictly necessary. But it does enable scenarios such as more easily running tests from multiple, non-sibling directories.

run-tests: factor refpath into Test classes refpath is a side-effect of the test type. We therefore move it to the Test class implementations.

run-tests: don't trap exceptions in Test.runTest() Exceptions are all handled in Test.run(). This code was redundant since the unittest test wrapper class was merged into Test.

run-tests: factor options out of run() We were only utilizing 2 parts of options. These have been converted to named arguments.

convert: mercurial source: convert global tags only - not local tags Mercurial tags can be local (tag -l, stored in .hg/localtags) or global (normal tags, tracked in .hgtags) ... or extensions can add other kind of tags. Convert would take all tags (except "tip"), not just the ones from .hgtags, and put them into .hgtags. Instead, convert only the global tags that come from .hgtags.

run-tests: refactor temporary directories in Test We no longer need cleanup() because setUp() and tearDown() cover it. We move tempdir creation into setUp() and always delete in tearDown()

run-tests: move _executetests into TestSuite

run-tests: capture execution times in TestResult TestResult has facilities for recording when tests start and stop. It makes sense to move execution time recording into TestResult. In addition, output generation is being moved into TestResult, a class that has a concept of an output buffer (and a lock).

run-tests: move outputtimes() into unittest runner class The unittest runner now does all the printing. Move outputtimes() there.

run-tests: refactor how times are recorded We now record times in Test.run(), which is a more appropriate place for it.

run-tests: eliminate Test._result The result of test execution is now reported on a TestResult. We no longer need to store a tuple of the result.

run-tests: replace Test.ignore() with raise IgnoreTest

run-tests: replace Test.skip() with raise SkipTest All the result functions now raise an Exception. We no longer need these functions and we can inline the raise.

run-tests: remove some legacy code around result handling unittest handles all results now. We no longer need to manually keep track of results.

run-tests: merge MercurialTest into Test Now that we execute all tests via unittest, the MercurialTest wrapper is not necessary. This patches moves the logic from MercurialTest into Test and makes Test a child of unittest.TestCase.

check-code: check for consistent usage of the websub filter in hgweb templates The check-code tool now expects the "desc" keyword to be followed by the "websub" filter, with the following exceptions: a) It has no filters at all, e.g. a changeset description in the raw style templates or the repository description in the summary page. b) It is followed by the "firstline" filter, e.g. the first line of the changeset description is displayed as a summary or title.

hgweb: apply websub filter to the changeset description in rss and atom feeds For example, this is useful for linking from the feed reader to a bug tracker. This follows the existing pattern used within the hgweb templates. With the exception of the raw style, all usages of the changeset "desc" keyword are now followed by either the "firstline" filter or the "websub" filter. When "websub" is used, it always follows the "escape" filter.

tests: write the hgrc file for test-hgweb-commands.t with cat instead of echo To improve the readability.

tests: tests for the rss feeds This matches the existing tests for the atom feeds.

localrepo: use _matchstatus of context objects Now that we have the machinery in place, we call the context method for changing the match object in the case of comparing the working directory with its parent. This removes the last of the hard-coded workingctx knowledge in localrepo paving the way for us to remove localrepo.status completely.

workingctx: override _matchstatus for parentworking case This patch encapsulate the logic for changing the match.bad function when comparing against the working directory's parent. Future patches will remove more of the 'if ... else' blocks in localrepo.status that test for this working directory parent case.

basectx: add _matchstatus method for factoring out last of parentworking logic This patch paves the way to allow a workingctx to override the match object with a custom 'bad' method for cases where status is sent a directory pattern.

workingctx: use inheritance for _buildstatus while keeping the fastpath This patch maintains the fast path for workingctx which is to not build a manifest if the working directory is being compared to its parent since, in this case, we can just copy the parent manifest.

localrepo: remove unneeded unpacking of r This unpacking is unneeded now because previous patches have removed the need for this method to modify each of these variables in favor of passing the whole set around to pre/post hook methods of the corresponding context object.

localrepo: call _poststatus hook instead of hardcoding symlink knowledge

workingctx: add _poststatus method to call _filtersuspectsymlink With this patch, we are one step closer to removing 'if ... else' logic in localrepo.status for testing if the context is the working directory or not. Future patches will replace those blocks of code with a call to the context's _poststatus hook so that each context object will do the right thing depending on the situation.

context: add a no-op _poststatus method This patch adds a private _poststatus method so that certain contexts, such as workingctx, can add custom post-processing to status.

localrepo: call _prestatus hook instead of hardcoding dirstate knowledge

workingctx: add _prestatus method to call _dirstatestatus With this patch, we are one step closer to removing 'if ... else' logic in localrepo.status for testing if the context is the working directory or not. Future patches will replace those blocks of code with a call to the context's _prestatus hook so that each context object will do the right thing depending on the situation.

context: add a no-op _prestatus method This patch adds a private _prestatus method so that certain contexts, such as workingctx, can add custom pre-processing to status.

localrepo: use _buildstatus from context

context: add _buildstatus method This method is a copy of localstatus.status's core logic. Later patches will clean up some of the dense coditionals in the for loop.

localrepo: remove workingctx logic already moved to context

localrepo: move the order of local variables This movement is a small step in getting rid of the 'if ... else' logic for testing the current working directory with its parent. Previously, the deleted, unknown, and ignored variables were set in a combination of before an 'if ... else' block and within the block. This moves the variables to be set outside the loop in one common place.

localrepo: factor out _manifestmatch logic for workingctx

localrepo: use _manifestmatches instead of duplicating logic

basectx: add _manifestmatches method This method is a duplicate of localrepo.mfmatches and sets the stage for factoring localrepo.status into a context method that will be customizable based on inheritance and object type.

localrepo: always set the variable r in status method This is a small patch to help streamline keeping tracking of the list of files for status in a variable already called 'r' ('s' is for subrepos in this method). We now move the setting of it out of an 'if' block so that we can later refactor more code into the context objects.

run-tests: execute tests via unittest Now that unittest mode is functionally equivalent to the default mode, we switch the default execution mode to unittest and remove the choice of different execution modes.

run-tests: implement Test.__str__ unittest sometimes does a str(test) and the default implementation doesn't do the right thing. So we override it.

run-tests: make failure reporting in unittest mode equivalent to default Unlike unittest's defaults, our result formatter does not print stack traces. Here, we change TestResult.addFailure() to be compatible with the existing/default execution mode.

run-tests: ignore failures from rmtree rmtree() may fail under certain conditions. We ignore failures at the individual test level because they can interfere with test execution. Furthermore, we'll reattempt deletion in the high-level test runner after all tests have finished. Note that this patch is not a code refactor like most of the patches before it. This change logically makes sense given the execution behavior of the tests.

run-tests: abort tests after first failure in unittest mode There is an execution mode on run-tests.py that stops after the first failure. unittest mode was previously not obeying this option. This patch fixes that.

run-tests: print compatible output from TextTestRunner Our unittest TextTestRunner now prints output similar to the output from the default execution mode - the output people expect from run-tests.py.

run-tests: don't print results in unittest mode A subsequent patch will have unittest print tests for us. Don't perform old-style printing when in unittest mode.

run-tests: move errpath deletion to setUp()

run-tests: kill daemons during tearDown()

run-tests: move err file writing to tearDown()

run-tests: refactor testtmp testtmp is now a member variable of our test class. It's value is computed during instance creation and the directory is managed via the lifetime of the test object.

run-tests: store skipped state on Test As code is being moved between functions, we need a member variable to hold skipped state.

run-tests: move some functionality to Test.tearDown()

run-tests: store last result in Test._result Subsequent patches move post-test actions into tearDown(). This requires tearDown() to have access to the last result.

run-tests: report test duration in Test.tearDown()

run-tests: store test return code and output in Test instance A subsequent patch that will introduce tearDown() requires test execution state be stored in the instance.

run-tests: keep track of test start and stop in MercurialTest.run() This brings run() more compatible with unittest.TestCase.run()

run-tests: keep track of test execution state in Test This patch starts a mini series of moving functionality into the newly-established setUp() and tearDown() methods.