revlog: replace flag check related to generaldelta with attribute check Same logic as the previous changesets. Differential Revision: https://phab.mercurial-scm.org/D10563

revlog: replace REVLOGV2 check related to sidedata with `hassidedata` checks This is more flexible and semantically more correct. The associated revlog's attribute exist since 827cb4fe62a3, so well we start linking sidedata to revlogv2. Differential Revision: https://phab.mercurial-scm.org/D10562

revlog: explicitely pass the "indexfile" parameter Most of this was already done when introducing the `target` parameter, but some remained. Having "indexfile" passed explicitely will help us to change the way we address a revlog later in the stack. With the introduction of more generic `docket`, the entry point will not necessarly be `xxx.i` file, and the actual index files will have a variable name. Differential Revision: https://phab.mercurial-scm.org/D10561

revlog: highlight current incompatibility in `rewrite_sidedata` See comment for details. We will need to fix the test coverage when this incompatibility is lifted. Differential Revision: https://phab.mercurial-scm.org/D10544

revlog: adjust rewrite_sidedata code to not delete existing revlog content The "w+" file mode is deleting all the content of the opened file. Which is bad… This is not caught by the test because the test only check for a full, initial pull where not pre-existing content exists. So we need to fix our test coverage here. However they are another issue that prevent "incremental" pull to work here. See next changeset for details. Differential Revision: https://phab.mercurial-scm.org/D10543

status: Add tests for some more edge cases * Size-preserving file contents modification * Filtering output to a deleted or removed file Differential Revision: https://phab.mercurial-scm.org/D10701

status: Extend issue 6483 test to exclude patterns With `hg status -X`, not just include pattern with `hg status -I` Differential Revision: https://phab.mercurial-scm.org/D10700

dirstate-tree: Add a test showing that issue 6335 is fixed … when using the new status algorithm and the tree-based dirstate. The previous algorithm still has this bug. Differential Revision: https://phab.mercurial-scm.org/D10699

dirstate-tree: Add a dirstate-v1-tree variant of some tests The `dirstate-v1` variant has the previous behavior. `dirstate-v1-tree` uses the same format on disk, but uses the new `DirstateMap` with a tree data structure and the new `status` algorithm. These were untested so far. Differential Revision: https://phab.mercurial-scm.org/D10698

merge with stable

rename: add hint about --at-rev if source file doesn't exist It's quite common that users want to record copy (rename) information after committing the working copy changes (i.e. an added and a deleted file). When they try `hg mv [--after] <src> <dst>`, that just fails because the source file doesn't exist. It seems helpful if we can point them to `--at-rev=.` in this case. Differential Revision: https://phab.mercurial-scm.org/D10697

dirstate-tree: Borrow paths from the "on disk" bytes Use std::borrow::Cow to avoid some memory allocations and copying. Differential Revision: https://phab.mercurial-scm.org/D10560

dirstate-tree: Borrow copy source paths from the "on disk" bytes Use std::borrow::Cow to avoid some memory allocations and copying. These particular allocations are not visible when profiling (as many files in a typical repo don’t have a copy source). This change is "warm up" for doing the same with paths of files themselves, which is more involved since those paths are used as `HashMap` keys. This gets of the way the addition of a lifetime parameter to several types. Differential Revision: https://phab.mercurial-scm.org/D10559

rust: Use `&HgPath` instead of `&HgPathBuf` in may APIs Getting the former (through `Deref`) is almost the only useful thing one can do with the latter anyway. With this changes, API become more flexible for the "provider" of these paths which may store something else that Deref’s to HgPath, such as `std::borrow::Cow<HgPath>`. Using `Cow` can help reduce memory alloactions and copying. Differential Revision: https://phab.mercurial-scm.org/D10558

dirstate-tree: Make `DirstateMap` borrow from a bytes buffer … that has the contents of the `.hg/dirstate` file. This only applies to the tree-based flavor of `DirstateMap`. For now only the entire `&[u8]` slice is stored, so this is not useful yet. Adding a lifetime parameter to the `DirstateMap` struct (in hg-core) makes Python bindings non-trivial because we keep that struct in a Python object that has a dynamic lifetime tied to Python’s reference-counting and GC. As long as we keep the `PyBytes` that owns the borrowed bytes buffer next to the borrowing struct, the buffer will live long enough for the borrows to stay valid. However this relationship cannot be expressed in safe Rust code in a way that would statisfy they borrow-checker. We use `unsafe` code to erase that lifetime parameter, and encapsulate it in a safe abstraction similar to the owning-ref crate: https://docs.rs/owning_ref/ Differential Revision: https://phab.mercurial-scm.org/D10557

rust: Read dirstate from disk in DirstateMap constructor Before this changeset, Python code first creates an empty `DirstateMap` Rust object, then immediately calls its `read` method with a byte string of the contents of the `.hg/dirstate` file. This makes that byte string available to the constructor of `DirstateMap` in the hg-cpython crate. This is a first step towards enabling parts of `DirstateMap` in the hg-core crate to borrow from this buffer without copying. Differential Revision: https://phab.mercurial-scm.org/D10556

rust: Remove handling of `parents` in `DirstateMap` The Python wrapper class `dirstatemap` can take care of it. This removes the need to have both `_rustmap` and `_inner_rustmap`. Differential Revision: https://phab.mercurial-scm.org/D10555

dirstate-tree: Fold "tracked descendants" counter update in main walk For the purpose of implementing `has_tracked_dir` (which means "has tracked descendants) without an expensive sub-tree traversal, we maintaing a counter of tracked descendants on each "directory" node of the tree-shaped dirstate. Before this changeset, mutating or inserting a node at a given path would involve: * Walking the tree from root through ancestors to find the node or the spot where to insert it * Looking at the previous node if any to decide what counter update is needed * Performing any node mutation * Walking the tree *again* to update counters in ancestor nodes When profiling `hg status` on a large repo, this second walk takes times while loading a the dirstate from disk. It turns out we have enough information to decide before he first tree walk what counter update is needed. This changeset merges the two walks, gaining ~10% of the total time for `hg update` (in the same hyperfine benchmark as the previous changeset). --- Profiling was done by compiling with this `.cargo/config`: [profile.release] debug = true then running with: py-spy record -r 500 -n -o /tmp/hg.json --format speedscope -- \ ./hg status -R $REPO --config experimental.dirstate-tree.in-memory=1 then visualizing the recorded JSON file in https://www.speedscope.app/ Differential Revision: https://phab.mercurial-scm.org/D10554

dirstate-tree: Use HashMap instead of BTreeMap BTreeMap has the advantage of its "natural" iteration order being the one we need in the status algorithm. With HashMap however, iteration order is undefined so we need to allocate a Vec and sort it explicitly. Unfortunately many BTreeMap operations are slower than in HashMap, and skipping that extra allocation and sort is not enough to compensate. Switching to HashMap + sort makes `hg status` 17% faster in one test case, as measure with hyperfine: ``` Benchmark #1: ../hg2/hg status -R $REPO --config=experimental.dirstate-tree.in-memory=1 Time (mean ± σ): 765.0 ms ± 8.8 ms [User: 1.352 s, System: 0.747 s] Range (min … max): 751.8 ms … 778.7 ms 10 runs Benchmark #2: ./hg status -R $REPO --config=experimental.dirstate-tree.in-memory=1 Time (mean ± σ): 651.8 ms ± 9.9 ms [User: 1.251 s, System: 0.799 s] Range (min … max): 642.2 ms … 671.8 ms 10 runs Summary './hg status -R $REPO --config=experimental.dirstate-tree.in-memory=1' ran 1.17 ± 0.02 times faster than '../hg2/hg status -R $REPO --config=experimental.dirstate-tree.in-memory=1' ``` * ./hg is this revision * ../hg2/hg is its parent * $REPO is an old snapshot of mozilla-central Differential Revision: https://phab.mercurial-scm.org/D10553

dirstate-tree: Add #[timed] attribute to `status` and `DirstateMap::read` When running with a `RUST_LOG=trace` environment variable, the `micro_timer` crate prints the duration taken by each call to functions with that attribute. Differential Revision: https://phab.mercurial-scm.org/D10552

dirstate-tree: Paralellize the status algorithm with Rayon The `rayon` crate exposes "parallel iterators" that work like normal iterators but dispatch work on different items to an implicit global thread pool. Differential Revision: https://phab.mercurial-scm.org/D10551

dirstate-tree: Avoid BTreeMap double-lookup when inserting a dirstate entry The child nodes of a given node in the tree-shaped dirstate are kept in a `BTreeMap` where keys are file names as strings. Finding or inserting a value in the map takes `O(log(n))` string comparisons, which adds up when constructing the tree. The `entry` API allows finding a "spot" in the map that may or may not be occupied and then access that value or insert a new one without doing map lookup again. However the current API is limited in that calling `entry` requires an owned key (and so a memory allocation), even if it ends up not being used in the case where the map already has a value with an equal key. This is still a win, with 4% better end-to-end time for `hg status` measured here with hyperfine: ``` Benchmark #1: ../hg2/hg status -R $REPO --config=experimental.dirstate-tree.in-memory=1 Time (mean ± σ): 1.337 s ± 0.018 s [User: 892.9 ms, System: 437.5 ms] Range (min … max): 1.316 s … 1.373 s 10 runs Benchmark #2: ./hg status -R $REPO --config=experimental.dirstate-tree.in-memory=1 Time (mean ± σ): 1.291 s ± 0.008 s [User: 853.4 ms, System: 431.1 ms] Range (min … max): 1.283 s … 1.309 s 10 runs Summary './hg status -R $REPO --config=experimental.dirstate-tree.in-memory=1' ran 1.04 ± 0.02 times faster than '../hg2/hg status -R $REPO --config=experimental.dirstate-tree.in-memory=1' ``` * ./hg is this revision * ../hg2/hg is its parent * $REPO is an old snapshot of mozilla-central Differential Revision: https://phab.mercurial-scm.org/D10550

dirstate-tree: Handle I/O errors in status Errors such as insufficient permissions when listing a directory are logged, and the algorithm continues without considering that directory. Differential Revision: https://phab.mercurial-scm.org/D10549

dirstate-tree: Ignore FIFOs etc. in the status algorithm If a filesystem directory contains anything that is not: * a "normal" file * a symbolic link * or a directory … act as if that directory entry was not there. For example, if that path was previously a tracked file, mark it as deleted or removed. Differential Revision: https://phab.mercurial-scm.org/D10548

dirstate-tree: Add the new `status()` algorithm With the dirstate organized in a tree that mirrors the structure of the filesystem tree, we can traverse both trees at the same time in order to compare them. This is hopefully more efficient that building multiple big hashmaps for all of the repository’s contents. Differential Revision: https://phab.mercurial-scm.org/D10547

dirstate-tree: Give to `status()` mutable access to the `DirstateMap` Differential Revision: https://phab.mercurial-scm.org/D10546

rust: Add doc-comments to DirstateStatus fields Differential Revision: https://phab.mercurial-scm.org/D10495

rust: Move "lookup" a.k.a. "unsure" paths into `DirstateStatus` struct Instead of having `status()` returning a tuple of those paths and `DirstateStatus`. Differential Revision: https://phab.mercurial-scm.org/D10494

rust: Remove DirstateMap::file_fold_map This was a HashMap constructed on demand and then cached in the DirstateMap struct to avoid reconstructing at the next access. However the only use is in Python bindings converting it to a PyDict. That method in turn is wrapped in a @cachedproperty in Python code. This was two redudant layers of caching. This changeset removes the Rust-level one to keep the Python dict cache, and have bindings create a PyDict by iterating. Differential Revision: https://phab.mercurial-scm.org/D10493

dirstate-tree: Add "non normal" and "from other parent" sets Unlike the other DirstateMap implementation, these sets are not materialized separately in memory. Instead we traverse the main tree. Differential Revision: https://phab.mercurial-scm.org/D10492

dirstate-tree: Add add_file, remove_file, and drop_file Again, various counters need to be kept up to date. Differential Revision: https://phab.mercurial-scm.org/D10491

dirstate-tree: Add has_dir and has_tracked_dir A node without a `DirstateMap` entry represents a directory. Only some values of `EntryState` represent tracked files. A directory is considered "tracked" if it contains any descendant file that is tracked. To avoid a sub-tree traversal in `has_tracked_dir` we add a counter for this. A boolean flag would become insufficent when we implement remove_file and drop_file. `add_file_node` is more general than needed here, in anticipation of adding the `add_file` and `remove_file` methods. Differential Revision: https://phab.mercurial-scm.org/D10490

dirstate-tree: Add clear_ambiguous_times in the new DirstateMap Also drive-by refactor it in the other DirstateMap Differential Revision: https://phab.mercurial-scm.org/D10489

dirstate-tree: Add copy_map_insert and copy_map_remove Differential Revision: https://phab.mercurial-scm.org/D10488

dirstate-tree: Maintain a counter of DirstateEntry’s and copy sources This allows implementing __len__ for DirstateMap and CopyMap efficiently, without traversing the tree. Differential Revision: https://phab.mercurial-scm.org/D10487

dirstate-tree: Serialize to disk The existing `pack_dirstate` function relies on implementation details of `DirstateMap`, so extract some parts of it as separate functions for us in the tree-based `DirstateMap`. The `bytes-cast` crate is updated to a version that has an `as_bytes` method, not just `from_bytes`: https://docs.rs/bytes-cast/0.2.0/bytes_cast/trait.BytesCast.html#method.as_bytes Drive-by refactor `clear_ambiguous_times` which does part of the same thing. Differential Revision: https://phab.mercurial-scm.org/D10486

rust: Add a Timestamp struct instead of abusing Duration `SystemTime` would be the standard library type semantically appropriate instead of `Duration`. But since the value is coming from Python as a plain integer and used in dirstate packing code as an integer, let’s make a type that contains a single integer instead of using one with sub-second precision. Differential Revision: https://phab.mercurial-scm.org/D10485

dirstate-tree: Add tree traversal/iteration Like Python’s, Rust’s iterators are "external" in that they are driven by a caller who calls a `next` method. This is as opposed to "internal" iterators who drive themselves and call a callback for each item. Writing an internal iterator traversing a tree is easy with recursion, but internal iterators cannot rely on the call stack in that way, they must save in an explicit object all state that they need to be preserved across two `next` calls. This algorithm uses a `Vec` as a stack that contains what would be local variables on the call stack if we could use recursion. Differential Revision: https://phab.mercurial-scm.org/D10370

dirstate-tree: Add map `get` and `contains_key` methods Differential Revision: https://phab.mercurial-scm.org/D10369

dirstate-tree: Add parsing only dirstate parents from disk Differential Revision: https://phab.mercurial-scm.org/D10368

dirstate-tree: Implement DirstateMap::read This reads the on-disk dirstate in its current format (a flat sequence of entries) and creates a tree in memory. Differential Revision: https://phab.mercurial-scm.org/D10367

dirstate-tree: Add `WithBasename` wrapper for `HgPath` In the tree-shaped dirstate we want to have nodes representing files or directories, where directory nodes contain a map associating "base" names to child nodes for child files and directories. Many dirstate operations expect a full path from the repository root, but re-concatenating string from nested map keys all the time might be expensive. Instead, `WithBasename` stores a full path for these operations but behaves as its base name (last path component) for equality and comparison. Additionally `inclusive_ancestors` provides the successive map keys that are needed when inserting a new dirstate node at a given full path. Differential Revision: https://phab.mercurial-scm.org/D10365

dirstate-tree: Empty shell for a second Rust DirstateMap implementation For background see description of the previous changeset "Make Rust DirstateMap bindings go through a trait object". Add an empty shell for a opt-in second Rust implementation of the `DirstateMap` type and the `status` function. For now all methods panic. This can be seen in "action" with: ./hg status --config experimental.dirstate-tree.in-memory=1 Differential Revision: https://phab.mercurial-scm.org/D10364

dirstate-tree: Abstract "non-normal" and "other parent" sets Instead of exposing `HashSet`s directly, have slightly higher-level methods for the operations that Python bindings need on them. Differential Revision: https://phab.mercurial-scm.org/D10363

dirstate-tree: Make Rust DirstateMap bindings go through a trait object This changeset starts a series that adds an experiment to make status faster by changing the dirstate (first only in memory and later also on disk) to be shaped as a tree matching the directory structure, instead of the current flat collection of entries. The status algorithm can then traverse this tree dirstate at the same time as it traverses the filesystem. We (Octobus) have made prototypes that show promising results but are prone to bitrot. We would like to start upstreaming some experimental Rust code that goes in this direction, but to avoid disrupting users it should only be enabled by some run-time opt-in while keeping the existing dirstate structure and status algorithm as-is. The `DirstateMap` type and `status` function look like the appropriate boundary. This adds a new trait that abstracts everything Python bindings need and makes those bindings go through a `dyn` trait object. Later we’ll have two implementations of this trait, and the same bindings can use either. Differential Revision: https://phab.mercurial-scm.org/D10362

remotefilelog: use the correct capability when using getfilestype threaded The functon was overlooked when the capability was renamed Differential Revision: https://phab.mercurial-scm.org/D10673

test-copies: test that copies' sidedata can get computed during push If the source of the push does not have the necessary sidedata but the server needs them, the client should compute them on the fly while pushing. Differential Revision: https://phab.mercurial-scm.org/D10350

test-copies: test that copies' sidedata can get computed during pull If the source does not have the data, the pulling client should compute the necessary side-data while pulling. Differential Revision: https://phab.mercurial-scm.org/D10349

test-copies: test that copies' sidedata does not get corrupted during push This is an important usecase. Differential Revision: https://phab.mercurial-scm.org/D10348

test-copies: test that copies' sidedata does not get corrupted during pull This is an important usecase. Differential Revision: https://phab.mercurial-scm.org/D10347

test-copies: simplify some conditional output Now that all computation using sidedata give the same result, we can simplify conditional Differential Revision: https://phab.mercurial-scm.org/D10346

sidedata: move documentation about sidedata helpers to sidedata module Differential Revision: https://phab.mercurial-scm.org/D10361

sidedata: move sidedata-related utils to the dedicated module Differential Revision: https://phab.mercurial-scm.org/D10360

sidedata: replace sidedata upgrade mechanism with the new one Note: this is split into a separate change (like some other patches in this series) because it's not easy to have all patches work 100% and this seemed easier for reviewers. When cloning or upgrading a repo, we may need to compute (or remove) sidedata. This is the same mechanism that is used in exchange, so we re-use the new system to simplify the code and fix the remaining issues (correctly dropping flags and handling partial removal, etc.). This also highlighted an issue with `test-copies-in-changeset.t` that kept sidedata categories that are not relevant anymore. They should probably be dropped entirely, but that would be for another patch. Differential Revision: https://phab.mercurial-scm.org/D10359

sidedata: add a way of replacing an existing sidedata computer This will be useful in a future patch to replace a sequential computer with a parallel computer. We only allow for explicit replacement, to force the users to think about overriding computers. Differential Revision: https://phab.mercurial-scm.org/D10358

bundle2: remove restriction around sidedata We are now capable of generating the missing sidedata on-the-fly. Differential Revision: https://phab.mercurial-scm.org/D10345

heptapod-ci: enable pytype checking The trigger is manual for now, until we get a better idea about stability, resource usage, etc. Differential Revision: https://phab.mercurial-scm.org/D10462

hghave: fix the definition of `python3` to work on Windows Both py2 and py3 executables are named `python.exe`, and may or may not be on PATH. So use the dispatcher executable that comes with py3 to fetch the version of the latest py3 executable. This allows at least one relnotes test to run on Windows. Differential Revision: https://phab.mercurial-scm.org/D10694

util: avoid echoing the password to the console on Windows py3 (issue6446) The `getpass.getpass()` implementation on Windows first checks if `sys.stdin` and `sys.__stdin__` are the same object. It's not on py3 because the former is replaced in dispatch.py with something that doesn't normalize '\n' to '\r\n'. When they aren't the same object, it simply calls `sys.stdin.readline()` instead of the mscvrt functions that read the input characters before they are echoed. This simply copies the `getpass.win_getpass()` implementation without the stdin check, and byteifies around the edges. I'm not sure if there's a reasonable replacement for the check that we could implement. When echoing input into the hg command, the `ui.interactive()` check causes `ui.getpass()` to bail before getting here. If the proper config switches are used to bypass that and call this, the process stalls until '\n' is input into the console. So there could be a deadlock here when run by another command if the wrong config settings are applied. Differential Revision: https://phab.mercurial-scm.org/D10708

sidedata: enable sidedata computers to optionally rewrite flags Sidedata computers may want to influence the flags of the revision they touch. For example, the computer for changelog-based copytracing can add a flag to signify that this revision might affect copytracing, inversely removing said flag if the information is no longer applicable. See inline documentation in `storageutil` for more details. Differential Revision: https://phab.mercurial-scm.org/D10344

cg4: introduce protocol flag to signify the presence of sidedata We need a way of signaling whether the current revision has sidedata or not, and re-using the revision flags would waste potential revlog flags and mix two normally independent layers. In this change, we add a single byte at the start of the ch4 delta header to set potential protocol flags. We also reclaim the revlog flag for sidedata, since it is no longer used, in its place now lives the (also experimental) copytracing flag. When generating deltas, apply the `CG_FLAG_SIDEDATA` flag if there is sidedata. When applying the deltas, if said flag is present, the next chunk contains the sidedata. Differential Revision: https://phab.mercurial-scm.org/D10343

changegroup: don't limit cgv4 to revlogv2 repos To help the transition from revlogv1 to revlogv2, we need to be able to enable cgv4 for revlogv1 repos, so that revlogv2 clients can handle adding/removing sidedata over the wire. Differential Revision: https://phab.mercurial-scm.org/D10342

sidedata: gate sidedata functionality to revlogv2 in more places Since revlogv1 is not capable of storing sidedata, we prevent sidedata mechanisms around the revlog layer from doing anything. We however keep the ones that allow a revlogv1 repo to generate sidedata on-the-fly on a push, the pull case simply does not add the sidedata to the revlog. Differential Revision: https://phab.mercurial-scm.org/D10341

sidedata: register copies sidedata computer regardless of the revlog version Repositories should not gate their sidedata computers based on any requirement, only their wanted sidedata. A repository might need to generate sidedata wanted by the peer that it itself does not want. Differential Revision: https://phab.mercurial-scm.org/D10340

revlog: replace the old `revlog_kind` approach with the new `target` one The new `target` attribute supersedes the previous one. Differential Revision: https://phab.mercurial-scm.org/D10353

revlog: introduce an explicit tracking of what the revlog is about Since the dawn of time, people have been forced to rely to lossy introspection of the index filename to determine what the purpose and role of the revlog they encounter is. This is hacky, error prone, inflexible, abstraction-leaky, <insert-your-own-complaints-here>. In f63299ee7e4d Raphaël introduced a new attribute to track this information: `revlog_kind`. However it is initialized in an odd place and various instances end up not having it set. In addition is only tracking some of the information we end up having to introspect in various pieces of code. So we add a new attribute that holds more data and is more strictly enforced. This work is done in collaboration with Raphaël. The `revlog_kind` one will be removed/adapted in the next changeset. We expect to be able to clean up various existing piece of code and to simplify coming work around the newer revlog format. Differential Revision: https://phab.mercurial-scm.org/D10352

config: add --source option to include source of value Showing the source of each config option is quite useful and not something the user should have to reach for the `--debug` flag for. I updates documentation and tests, except for one place in `test-hgrc.t` where I thought the test might have been intended to also test that `--debug` results in `ui.quiet` etc being test. Differential Revision: https://phab.mercurial-scm.org/D10668

rewriteutil: say how many commits would become orphan if commit is rewritten This copies the message from the evolve extension, but modifies it a bit to work with the grammar (in particular with the use of "change branch of" as `action`). I don't know why it doesn't use the same `_formatrevs()` as for public commmits. Differential Revision: https://phab.mercurial-scm.org/D10671

rewriteutil: give examples of public changesets that can't be rewritten This patch copies the feature from the evolve extension. Differential Revision: https://phab.mercurial-scm.org/D10670

convert: update p4 for Python 3 Differential Revision: https://phab.mercurial-scm.org/D10703

tests: change the fixer commands to use the buffer attribute on stdio objects Otherwise `\r` was getting injected into the fixed lines and throwing off the commit hashes on Windows when the fixer is invoked with py3. Differential Revision: https://phab.mercurial-scm.org/D10637

tests: stabilize test-persistent-nodemap.t on Windows Several issues here: - Hooks can't invoke shell scripts on Windows, so use `sh` to launch - `dd` in MSYS only recognizes `status=noxfer` - The `PATH` updating triggered a massive slowdown, but is no longer needed I have no idea why, but removing the `PATH` update substantially increased the speed of the test. It was running finishing at ~4:30 with `--debug` and ~14:50 without it, but now completes in ~2:20 on my Windows laptop. Differential Revision: https://phab.mercurial-scm.org/D10636

tests: invoke some shell scripts through the shell interpreter for Windows Otherwise, Windows was prompting what program to use to open the file (or just opening it if there was a file association configured). Differential Revision: https://phab.mercurial-scm.org/D10635

tests: run python script through quoted interpreter instead of directly This helps Windows when python is installed to %PROGRAMFILES%. Differential Revision: https://phab.mercurial-scm.org/D10634

tests: ensure `$PYTHON` is quoted for Windows Global installs of python3 go into "Program Files", and tons of tests fail with mysterious errors if this isn't quoted. Most of this is a followup to 0826d684a1b5, but a some of these were existing issues. Shebang lines are ignored because quoting breaks direct execution- these will need to be launched indirectly with the quoted `$PYTHON` command. Differential Revision: https://phab.mercurial-scm.org/D10633

black: make codebase compatible with black v21.4b2 and v20.8b1 I don't know what exact version of black made it care about these whitespace differences, but this is the version I got when I just installed it with `pip3 install black`. I'm intentionally not increasing the version of black required, as I don't want to force everyone to upgrade their version of black, and these fixes are backwards compatible with black v20.8b1. If there are more issues in the future and this becomes a maintenance burden I may do so in a future change. Tested with both versions of black (I got the older version via `pip3 install black==20.8b1`) Differential Revision: https://phab.mercurial-scm.org/D10539

debugcommands: fix some plural-agreements I noticed Differential Revision: https://phab.mercurial-scm.org/D10669

merge: with stable

Added signature for changeset 067f2c53fb24

Added tag 5.8 for changeset 067f2c53fb24

branching: merge stable into default

phabricator: adapt to the new `urlutil.url()` API This avoids a bunch of deprecation warnings in the tests. Differential Revision: https://phab.mercurial-scm.org/D10541

extensions: ignore exceptions from an extension's `getversion()` method This method is usually called when there's a stacktrace being generated, or with `hg version -v`. Raising another exception risks mangling the bug report info. I hit this issue when trying to add the method to the keyring extension to report the version of the extension and the underlying module, and ran into demandimport issues prior to py3.8. It seems like a wise thing to do anyway, though unfortunately there's no convenient `ui` object around to issue a warning. Use 'unknown' to signal that it tried to report a version and failed, unlike the default case of printing nothing. Differential Revision: https://phab.mercurial-scm.org/D10540

git: ensure all dirstate state values are bytes I'm not sure how this particular git status occurs, but after the fallout of issue 6510 and getting into the issue 6511 state where `git status` shows the files as modified in both the "to be committed" and "not staged" lists, `hg diff` was crashing in `workingctx.__contains__()`. Differential Revision: https://phab.mercurial-scm.org/D10532

tests: synchronize the git and Mercurial username The problem with the default name of "test" set by the test runner is the stringutil methods are unable to split out separate user and email addresses that git wants. This means the username is recorded in git as "test <test>". Amending a commit with that user ends up trying to use "<test>" as the person field for the new commit, and the git library complains about the angle brackets. We should probably abort with a clearer message any time this bad form is used with the git extension. One of the commit dates is tweaked to recreate the ambiguous hash prefix from before. Differential Revision: https://phab.mercurial-scm.org/D10531

git: initialize `extra` to have at least the branch name for nullid Otherwise, this crashes trying to convert to local encoding: ... File "/mnt/c/Users/Matt/hg/mercurial/logcmdutil.py", line 333, in _show branch = ctx.branch() File "/mnt/c/Users/Matt/hg/mercurial/context.py", line 675, in branch return encoding.tolocal(self._changeset.extra.get(b"branch")) File "/mnt/c/Users/Matt/hg/mercurial/encoding.py", line 181, in tolocal if isasciistr(s): TypeError: a bytes-like object is required, not 'NoneType' This was originally reported to the thg bug tracker. https://foss.heptapod.net/mercurial/tortoisehg/thg/-/issues/5629 Differential Revision: https://phab.mercurial-scm.org/D10528

git: consistently use str for parents when rebuilding the index database The tests show no changes, but when these values are overwritten shortly after when a git commit object is available, that uses str. It seems better to use that for consistency. It does materially affect the database though, because the old value stored was `X'3030..3030'` and is now '00..00' when the changelog table is dumped in sqlite3. There is one query that specifies the parents, but it passes the non null hashes as str, so it worked as expected. That likely explains the lack of test changes. Differential Revision: https://phab.mercurial-scm.org/D10527

git: pass the correct type to the sqlite3 query for baselog.hasnode() It looks like this function is mostly used in exchange (which isn't supported now) and histedit (which crashes). But I did verify in a REPL that passing bytes to `db.execute()` fails to find the row, whereas passing str works. Differential Revision: https://phab.mercurial-scm.org/D10526

git: use the correct type for stopping changelog.revs() The `tip` function returns a binary node, but the database is expecting an int. Differential Revision: https://phab.mercurial-scm.org/D10525

git: use the proper filenode for deleted files in changelog.changelogrevision Inline printing shows it still doesn't find the removed file in the test, but it is at least a str instead of bytes like the immediate query before it that does find files. Looking at the database, it doesn't look like the remove was recorded. Additionally, `hg log -r 'removes("re:.*")'` stacktraces. Differential Revision: https://phab.mercurial-scm.org/D10524

tests: add coverage for git.changelog.headrevs(...) Differential Revision: https://phab.mercurial-scm.org/D10523

git: make changelog.tiprev() return int instead of tuple (issue6510) Differential Revision: https://phab.mercurial-scm.org/D10522

git: fix partial node matching Looks like everything is meant to be a str here. Differential Revision: https://phab.mercurial-scm.org/D10521

tests: stabilize test-git-interop.t for some versions of git Not sure why this differs on my system, but it's likely due to running 2.17.1 on Ubuntu 18.04. Differential Revision: https://phab.mercurial-scm.org/D10520

manifests: push down expected node length into the parser This strictly enforces the node length in the manifest lines according to what the repository expects. One test case moves large hash testing into the non-treemanifest part as treemanifests don't provide an interface for overriding just the node length for now. Differential Revision: https://phab.mercurial-scm.org/D10533

core: don't hard-code node length Differential Revision: https://phab.mercurial-scm.org/D10536