perf: make `perfrevlogindex` use the new `index.rev` api if available Differential Revision: https://phab.mercurial-scm.org/D7360

perf: make `perfnodemap` use the new `index.get_rev` api if available Differential Revision: https://phab.mercurial-scm.org/D7358

index: use `index.get_rev` in `remotefilelog` Differential Revision: https://phab.mercurial-scm.org/D7357

index: use `index.get_rev` in `histedit.processreplacement` Differential Revision: https://phab.mercurial-scm.org/D7354

index: use `index.get_rev` in `histedit.adjustreplacementsfrommarkers` Differential Revision: https://phab.mercurial-scm.org/D7353

index: use `index.get_rev` in `rebase._computeobsoletenotrebased` Differential Revision: https://phab.mercurial-scm.org/D7350

index: use `index.get_rev` in `rebase.successorrevs` The code is slightly updated in the process for simplicity. Differential Revision: https://phab.mercurial-scm.org/D7349

index: use `index.get_rev` in `unionrepo.unionrevlog` Differential Revision: https://phab.mercurial-scm.org/D7338

index: use `index.rev` in `bundlerepo.bundlerevlog` Differential Revision: https://phab.mercurial-scm.org/D7340

index: use `index.get_rev` in `exchange._pullapplyphases` Differential Revision: https://phab.mercurial-scm.org/D7347

index: use `index.rev` in `exchange.fallbackheads` Differential Revision: https://phab.mercurial-scm.org/D7345

index: use `index.get_rev` in `revset._mapbynodefunc` We slightly update the code in the process. Differential Revision: https://phab.mercurial-scm.org/D7343

index: use `index.get_rev` in `discovery._postprocessobsolete` Differential Revision: https://phab.mercurial-scm.org/D7341

index: use `index.get_rev` in `repoview.pinnedrevs` We simplify the code in the process Differential Revision: https://phab.mercurial-scm.org/D7337

index: use `index.get_rev` in `obsolete._computephasedivergentset` Differential Revision: https://phab.mercurial-scm.org/D7336

index: use `index.get_rev` in `obsutil.getobsoleted` Differential Revision: https://phab.mercurial-scm.org/D7335

index: use `index.get_rev` in `phases.newheads` Differential Revision: https://phab.mercurial-scm.org/D7332

index: use `index.get_rev` in `localrepo.known` Differential Revision: https://phab.mercurial-scm.org/D7327

index: add a `get_rev` method (API) The new `index.getrev(node)` is to be preferred over using: `index.nodemap.get(node)`. This get us closer to be able to remove the `nodemap` attribute of the index. Differential Revision: https://phab.mercurial-scm.org/D7326

index: use `index.rev` in `revlog.rev` Differential Revision: https://phab.mercurial-scm.org/D7325

index: add a `rev` method (API) The new `index.rev(node)` is to be preferred over using `node index.nodemap[node]`. This get us closer to be able to remove the `nodemap` attribute of the index. Differential Revision: https://phab.mercurial-scm.org/D7324

perf: make `perfphasesremote` use the new `index.has_node` api (If available) Differential Revision: https://phab.mercurial-scm.org/D7359

index: use `index.has_node` in `infinitypush` Differential Revision: https://phab.mercurial-scm.org/D7356

index: use `index.has_node` in `phabricator.getoldnodedrevmap` Differential Revision: https://phab.mercurial-scm.org/D7355

index: use `index.has_node` in `histedit.cleanupnode` Differential Revision: https://phab.mercurial-scm.org/D7352

index: use `index.has_node` in `histedit._finishhistedit Differential Revision: https://phab.mercurial-scm.org/D7351

index: use `index.has_node` in `exchangev2._pullchangesetdiscovery` Differential Revision: https://phab.mercurial-scm.org/D7348

index: use `index.has_node` in `exchange._pulldiscoverychangegroup` Differential Revision: https://phab.mercurial-scm.org/D7346

index: use `index.has_node` in `bookmarks.bmstore` Differential Revision: https://phab.mercurial-scm.org/D7344

index: use `index.has_node` in `tags.findglobaltags` Differential Revision: https://phab.mercurial-scm.org/D7342

index: use `index.has_node` in `bundlerepo.bundlerevlog` Differential Revision: https://phab.mercurial-scm.org/D7339

index: use `index.has_node` in `obsutil.foreground` Differential Revision: https://phab.mercurial-scm.org/D7334

index: use `index.has_node` in `obsutil.exclusivemarkers` Differential Revision: https://phab.mercurial-scm.org/D7333

index: use `index.has_node` in `phases.filterunknown` Differential Revision: https://phab.mercurial-scm.org/D7331

index: use `index.has_node` in `analyzeremotephases` Differential Revision: https://phab.mercurial-scm.org/D7330

index: use `index.has_node` in `repo._rollback` Differential Revision: https://phab.mercurial-scm.org/D7329

index: use `index.has_node` in `revlog.addgroup` Differential Revision: https://phab.mercurial-scm.org/D7328

index: use `index.has_node` in `revlog.addrevision` Differential Revision: https://phab.mercurial-scm.org/D7323

index: add a `has_node` method (API) The new `index.has_node(node)` is to be preferred over: `node in index.nodemap`. This get us closer to be able to remove the `nodemap` attribute of the index. Differential Revision: https://phab.mercurial-scm.org/D7322

revlog: deal with nodemap deletion within the index Since the nodemap data now live in the index, it should be the index responsibility to ensure the data are up to date. The C version of the index is already dealing with such deletion. This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D7321

revlog: clean up the node of all revision stripped in the C code For some obscure reason, the loop cleaning up node was skipping the first element… I cannot see a reason for it. The overall code is running fine nevertheless because the node are also explicitly deleted from python. We want to delete this explicit deletion, so we need to fix that code first. This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D7320

revlog: move nodemap update within the index code Since the nodemap data now live in the index, it should be the index responsibility to ensure the data are up to date. This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D7319

revlog: deprecate the _nodecache attribute (API) This attribute have been the same object for a long time. Code should directly access the nodemap in case of need. (Or the final API when this will be done). This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D7318

revlog: access the nodemap through the index The `revlog.rev` method now access the nodemap through `self.index.nodemap`, instead of using the `_nodecache` attribute that we are trying to remove. This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D7317

revlog: return the nodemap as the nodecache Ultimately, the nodecache is the nodemap. To stop having this disctinction, we start using the nodemap where the nodecache was used. This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D7316

revlog: clarify which version use the older API in perf This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D7315

revlog: no longer return the nodemap after parsing Now that both pure and cext version have a `nodemap` attribute, we do not need to return the `nodemap` object after parsing. This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D7314

revlog: move the nodemap into the index object (for pure) This make the pure code closer to the C extension one. The ultimate goal is to merge the two into a single object and offer a unified API. This changeset focus on gathering the data on the same object. For now the code for `revlogoldindex` and `BaseIndexObject` index object are quite similar. However, there will be larger divergence later on, so I don't think is worth doing a base case. This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D7313

revlog: introduce an explicit NodeMap class for pure code This class make the "pure" nodemap raise the same exception than the C-extension one. This is a step toward unifying nodemap and index, the class is not meant to survive on the long run. This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. There is a new `isinstance` call, it will be cleaned up in coming changesets. Differential Revision: https://phab.mercurial-scm.org/D7312

utils: move the `dirs` definition in pathutil (API) Before this change, the `dirs` class was accessible through the `mercurial.util` module. That module is expected to stay free of scm specific content. The `pathutil` destination has been selection by Martin von Zweigbergk. This work is part of a refactoring to unify the revlog index and the nodemap. This unification prepare the use of a persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D7311

packaging: stop installing i18n files The WiX installer has been shipping the content of the i18n/ directory since it was introduced in 2010 in 1e022c88a0a5. And the installer was subsequently refactored to only ship the .po files and hggettext. The .po files and the hggettext script are only used at build time to produce .mo files, which Mercurial does use at run-time. It doesn't make sense to install these files on Windows. So this commit stops doing that. This change further converges the file layout of the Inno and WiX installers. Differential Revision: https://phab.mercurial-scm.org/D7165

packaging: install hgk as hgk.tcl Giving it a file extension will give Windows a better chance at being able to execute it via standard means. This also makes WiX consistent with the Inno installer. Differential Revision: https://phab.mercurial-scm.org/D7164

packaging: add logo-droplets.svg The WiX installer adds this file. Let's add it to the Inno installer for consistency. Differential Revision: https://phab.mercurial-scm.org/D7163

packaging: install documentation to doc/ directory The source directory is "doc" and "doc" is used by the WiX installer. I think it makes sense to converge on the canonical path name. While we're here, we also lower the case because we can. (I think lower case names make more sense plus it is more consistent.) This only affects the Inno installer at the moment because it is the only installer using the staging code. Differential Revision: https://phab.mercurial-scm.org/D7162

packaging: always pass VERSION into Inno invocation The code in the Inno file was a holdover from before we had Python driving execution. With Python in the driver's seat, we can now have it resolve the version string and pass it into Inno, making the code easier to understand for people who aren't packaging gurus. Differential Revision: https://phab.mercurial-scm.org/D7161

packaging: remove hg.exe.local file <exe>.local files are used by Windows to set up DLL redirection. But these files are ignored if you embed an application manifest in your binary, which we do. So the existence of this file serves no purpose. So we remove it. Differential Revision: https://phab.mercurial-scm.org/D7160

packaging: stage installed files for Inno Previously, the Inno installer maintained its own mapping of source files to install location. (We have to maintain a similar mapping in the WiX installer.) Managing the explicit file layout for Windows packages is cumbersome and redundant. Every time you want to change the layout you need to change N locations. We frequently forget to do this and we only find out when people install Mercurial from our packages at release time. This commit starts the process of consolidating and simplifying the logic for managing the install layout on Windows. We introduce a list of install layout rules. These are simply source filenames (which can contain wildcards) and destination paths. The Inno packaging code has been updated to assemble all files into a staging directory that mirrors the final install layout. The list of files to add to the installer is derived by walking this staging directory and dynamically emitting the proper entries for the Inno Setup script. I diffed the file layout before and after this commit and there is no difference. Another benefit of this change is that it facilitates easier testing of the Windows install layout. Before, in order to test the final install layout, you needed to build an installer and run it. Now, you can stage files into the final layout and test from there, without running the installer. This should cut down on overhead when changing Windows code. Differential Revision: https://phab.mercurial-scm.org/D7159

packaging: process Inno Setup files with Jinja2 I want to make the Inno Setup files dynamically generated. This will enable us to do things like automatically derive the set of files to be packaged instead of having to manually keep lists of files in sync across installers. As the first step towards this, we process the Inno Setup files with Jinja2. As part of this conversion, we had to escape syntax in mercurial.iss that conflicts with Jinja2. I also took the opportunity to include modpath.iss via Jinja2 instead of using Inno's preprocessor. This keeps the Python code a bit simpler. Differential Revision: https://phab.mercurial-scm.org/D7158

packaging: install and run Inno files in a build directory Upcoming commits will refactor the Windows installers so their content is dynamically derived. In preparation for this, we copy the Inno files into a new build directory and run them from there. This required changing some relative paths to work from a new directory level but is otherwise a pretty straightforward change. Differential Revision: https://phab.mercurial-scm.org/D7157

packaging: consolidate CLI functionality into packaging.py Consolidating functionality for invoking code in the hgpackaging package through a single CLI entry point will make things simpler when we add more complexity to that package. For example, it will allow us to run things out of a virtualenv with third party packages. This commit consolidates functionality from the Inno and WiX build.py scripts into a new packaging.py script. That script simply creates a virtualenv and runs the CLI functionality in it. The new virtualenv is populated with jinja2 because I felt it easier to incorporate requirements file processing in this commit and we will soon use jinja2 in an upcoming commit. The unified CLI functionality will also make it easier to script other packaging workflows going forward. e.g. RPM, Debian, and macOS packaging. Differential Revision: https://phab.mercurial-scm.org/D7156