shelve: avoid writing file that is never read from The contents of the .files file has not been used since 1d7a36ff2615 (shelve: use rebase instead of merge (issue4068), 2013-10-23), so stop writing it. Where we currently use the presence of the file as a check for a valid shelve name, switch to checking for the .patch file.

hgk: don't break on repositories with obsolete changesets Check the existence of a changeset before adding it to the list returned by debug-rev-list command.

test: protect the run-tests.py --json test behind an hghave rule We add a rules to detect availability of a json module and skip if json is not available.

merge with stable

hgweb: refresh hgweb.repo on phase change (issue4061) Make hgweb.refresh() also look at phaseroots file (in addition to 00changelog.i file) and reload the repo when os.stat returns different mtime or size than cached, signifying the file was modified. This way if user changes phase of a changeset (secret <-> draft), there's no need to restart hg serve to see the change.

help: fix typo in log examples

ssl: on OS X, use a dummy cert to trick Python/OpenSSL to use system CA certs This will give PKI-secure behaviour out of the box, without any configuration. Setting web.cacerts to any value or empty will disable this trick. This dummy cert trick only works on OS X 10.6+, but 10.5 had Python 2.5 which didn't have certificate validation at all.

ssl: refactor sslkwargs - move things around a bit, preparing for next change

revert: special case 'hg revert --all' On large repos, hg revert --all can take over 13 seconds. This is mainly due to it walking the tree three times: once to find the list of files in the dirstate, once to find the list of files in the target, and once to compute the status from the dirstate to the target. This optimizes the hg revert --all case to only require the final status. This speeds it up to 1.3 seconds or so (with hgwatchman enabled). Further optimizations could be done for the -r NODE and pattern cases, but they are significantly more complex.

test-commandserver: make runcommand message bolder It seems ' runcommand' is difficult to distinguish from command output. '*** runcommand' is slightly better.

test-commandserver: rewrite manual substitution of output by (glob) match

test-commandserver: remove redundant banner output Since test output was inlined, "testing <func>" message should no longer be necessary.

test-commandserver: remove .py test which was ported to .t

test-commandserver: port test functions from .py to .t Though we have to duplicate import statements, .t test is still more handy than .py test which has cryptic .out file. This change allows to skip a part of test by #if conditional, which my next patch series depends on.

test-commandserver: add stub for .t test by copying .out with 2-space indent Currently test-commandserver.t only contains output, so it is skipped by #require false.

test-commandserver: split helper functions to new hgclient module This prepares for porting test-commandserver.py to .t test. Though command-server test needs many Python codes, .t test will be more readable than .py test thanks to inlined output.

heredoctest: do not append extra newline character to continuation line Trailing newline characters are kept in lines.

heredoctest: use the same dict for local/global contexts as in doctest In order to mimic module-level evaluation, globals and locals should be the same object, so doctest does not pass separate locals dict. https://docs.python.org/2.7/reference/simple_stmts.html#exec This fixes NameError in the following example: >>> import foo >>> def bar(): ... foo # must exist in globalvars

cmdserver: drop useless in_ attribute from channeledoutput The previous patch makes sure that in_ == out, so it's no longer needed to keep in_ for __getattr__. Also, it seems strange for channeledoutput to have in_ stream which is actually a writable file object.

cmdserver: get file attributes of 'e'-channel from stdout, not from stderr It seems wrong to get attributes from object different than the underlying file. In the following example, it doesn't make sense to flush stderr after writing to stdout: self.ferr.write(str(a)) if not getattr(self.ferr, 'closed', False): self.ferr.flush()

cmdserver: correct doc of channeledoutput in_ is only used as the source of file attributes.

merge with stable

commands: add debuglocks to report/clear lock state

test-convert-git.t: make copy detection deterministic Since both 'bar' and 'bar-copied' matched 'bar-copied2', Git's copy detection would sometimes result in 'bar' being the source for 'bar-copied2' and sometimes 'bar-copied'. Change bar in a separate commit so that that would no longer be the case.

revsetbenchmark: add a rebase-related revset to the benchmark list

revsetbenchmark: allow comments ('#' prefix) in the revset input

revsetbenchmark: make it clear that revsets may be read from stdin

tags: use full hash for formatter output as in log or annotate commands

tags: change field name of formatter output to be the same as log command Since -T option is not public yet, this won't break backward compatibility.

files: correct topic of formatter

revert: move targetsubs calculation down to its use A future patch will be reorganizing this section of the code into two paths, and targetsubs complicates this by existing in the middle of one path, but not the other. We fix that by moving it 200 lines down, to the only place it's used.

help: document that default hgweb style is called paper (issue4373)

help: update help for hgweb template and style (issue4373)

bundle2: rename functions that have the same name

mq: write headers of new patches using patchheader

mq: refactor patchheader header ordering to match export (BC) The refactoring also gives more robust and extendable handling of other HG headers.

mq: upgrade non-plain patches to HG format when setting parent in patchheader Parent will now always be updated or added when qrefreshing HG patches. Plain patches will not be changed, but patches that neither are plain nor HG will be upgraded to HG patches on first refresh.

mq: make patchheader .plainmode more reliable Instead of having to make extra checks whenever we use .plainmode, let the initial value consider the actual patch header content.

bundle2: remove heads and common arguments to getbundle parts generators

bundle2: separate bundle10 and bundle2 cases in getbundle() The primary goal is to make it easier for extensions to alter how bundle2 parts are laid out. They now can use the getbundle2partsgenerator decorator to add new parts, or directly act on getbundle2partsmapping to wrap existing part functions. Note the 'request for bundle10 must include changegroup' error was kept under the same conditions as before, although the logic changes don't make it obvious.

bundle2: pass b2caps down to functions adding bundle2 parts for getbundle

parsers: fix uninitialize variable warning The heads pointer is not initialized correctly if filter is false, causing both clang and gcc to issue a warning. Correctly initialize heads to NULL.

revset: use `subset &` in bare `p2()` This takes advantage of the `fullreposet` smartness with a nice speedup. It's a similar speedup to `p1()` when a merge is in progress (the non merge case is already lightning fast anyway.)

revset: use `subset &` in bare `p1()` This takes advantage of the `fullreposet` smartness and yields a nice speedup. revset #0: p1() 0) wall 0.003256 comb 0.010000 user 0.010000 sys 0.000000 (best of 527) 1) wall 0.000066 comb 0.000000 user 0.000000 sys 0.000000 (best of 23224)

revset: use `subset &` in `rev` This takes advantage of the `fullreposet` smartness and yields a nice speedup. revset #0: rev(25) 0) wall 0.005480 comb 0.000000 user 0.000000 sys 0.000000 (best of 305) 1) wall 0.000052 comb 0.000000 user 0.000000 sys 0.000000 (best of 21891)

revset: use `subset &` in `origin` This takes advantage of the `fullreposet` smartness. revset #0: origin(tip) 0) wall 0.005353 comb 0.000000 user 0.000000 sys 0.000000 (best of 354) 1) wall 0.003080 comb 0.000000 user 0.000000 sys 0.000000 (best of 446)

revset: use `subset &` in `follow` This takes advantage of the `fullreposet` smartness. revset #0: follow(COPYING) 0) wall 0.002446 comb 0.000000 user 0.000000 sys 0.000000 (best of 735) 1) wall 0.000331 comb 0.000000 user 0.000000 sys 0.000000 (best of 5672)

revset: use `subset &` in `filelog` This takes advantage of the `fullreposet` smartness. revset #0: file(COPYING) 0) wall 3.179066 comb 3.180000 user 3.140000 sys 0.040000 (best of 3) 1) wall 2.723699 comb 2.730000 user 2.690000 sys 0.040000 (best of 4)