copy: recommend `--at-rev .` if target was added in parent commit If the target file was added in the working copy parent, it's much more likely that the user meant to use `--at-rev .` (to record the copy/rename in the that commit) than `--force` (to replace the just-added file by another file). Differential Revision: https://phab.mercurial-scm.org/D11667

fix: appease pyflakes and make unused variables more obvious pyflakes is complaining that `baserevs` is redefined by the list comprehension, and while this lint can be valuable, it's not actually a problem here. Differential Revision: https://phab.mercurial-scm.org/D11683

rewrite: fix issue6599 Explanation inside. Differential Revision: https://phab.mercurial-scm.org/D11685

bookmarks: add a `ignore` variant of the bookmark mode This new mode allow to disable bookmark exchange with some path (or all path). Differential Revision: https://phab.mercurial-scm.org/D11677

bookmarks: add support for `mirror` mode to `incoming` This is more consistent. Differential Revision: https://phab.mercurial-scm.org/D11676

bookmarks: move the `mirror` option to the `paths` section A new `bookmarks` section with a `mirror` option have been added. That option has never been released yet. This new options is limited since it affect all paths without distinction. In case where a repository is interacting with multiple peers, being able to control behavior on a path basis can be quite valuable. In addition, having more variant of behavior would be interesting, especially a mode where no bookmark exchanged is tried at all. Such new mode (implemented later) make a lot of sense for configuration on a path-basis. Configuration of the default behavior is still possible through the usage of generic path configuration. The "old" config, becomes: [bookmarks] mirror=True becomes: [path] *:bookmarks.mode=mirror Differential Revision: https://phab.mercurial-scm.org/D11675

path: keep the path instance in the `pulloperation` This will allow more pull code to use the path options. Ideally we would modify the peer API to keep the path instance. However that is much more churn that I can deal with for my current goal: adjusting a user facing API for a new feature before we release it in the 6.0 changesets. So I am taking a shortcut that seems reasonable. Differential Revision: https://phab.mercurial-scm.org/D11674

path: return path instance directly from get_pull_paths This means the caller has to do a bit more work, however it give access to the `path` instance and the information it contains. Differential Revision: https://phab.mercurial-scm.org/D11673

path: unify path creation in `get_pull_paths` This remove a special case and will make it possible to return `path` instance directly. Differential Revision: https://phab.mercurial-scm.org/D11672

path: add a new argument to control path validation During pull, unvalidated path might be used, having the option to do so directly will allow use to simplify some code and unlock more `path` usage later in the series. Differential Revision: https://phab.mercurial-scm.org/D11671

rhg: internally, return a structured representation from hg cat The purpose of this change is to make it possible to support limited templating in `hg cat`, so we could print separators between files etc. The templating itself is not implemented yet, so this functionality is unused in `rhg cat`. However, in our fork of hg we're implementing a slightly different command `hg jscat` which makes use of this. So accepting this change will let us minimize the size of the patch we're maintaining on our side. Differential Revision: https://phab.mercurial-scm.org/D11679

rhg: fix `hg cat` interaction with null revision Differential Revision: https://phab.mercurial-scm.org/D11664

dirstate-v2: add an option to prevent unintentional slow dirstate-v2 This is the project policy discussed in November 2020 and already put to use for the persistent nodemap. Differential Revision: https://phab.mercurial-scm.org/D11668

rhg: fix formatting error reported by test-check-format-rust.t Differential Revision: https://phab.mercurial-scm.org/D11670

chistedit: add option to show order of commits in opposite order Many users (including me) expect the order of commits in histedit to match the order in `hg log -G` and are confused because it doesnn't. This patch adds an option to show later commits first in the list. I've only added support for it in chistedit for now. As a consequence, I've marked the config option experimental (I think it should apply to both interfaces before it graduates). Differential Revision: https://phab.mercurial-scm.org/D11669

dirstate-v2: Separate HAS_FILE_MTIME and HAS_DIRECTORY_MTIME flags Previously the same flag was used, with its meaning based on whether the node otherwise identifies a file tracked anywhere. In addition to being more explicit, this enables storing a directory mtime if a given path used to be tracked in a parent commit (so the dirstate still has data about it) but became a directory in the working copy. (However this is not done yet as it would require a larger change, replacing the `dirstate_map::NodeData` enum with struct fields.) Differential Revision: https://phab.mercurial-scm.org/D11662

dirstate-v2: Extend node flags to 16 bits Only 7 out of 8 available bits are used right now. Reserve some more. Future versions of Mercurial may assign meaning to some of these bits, with the limitation that then-older versions will always reset those bits to unset when writing nodes. (A new node is written for any mutation in its subtree, leaving the bytes of the old node unreachable until the data file is rewritten entirely.) Differential Revision: https://phab.mercurial-scm.org/D11661

narrow: raise StateError when working copy is stale (for detailed exit code) Differential Revision: https://phab.mercurial-scm.org/D11663

dirstate-v2: Use attributes as intended instead of properties in v2_data() The property return other integer values instead of None, so `is not None` does not work. This fixes test-dirstate-race.t in pure-Python mode, which currently fails on the default branch. Differential Revision: https://phab.mercurial-scm.org/D11660

dirstate: Remove unused variable This fixes test-check-pyflakes.t which is currently failing on the default branch. Differential Revision: https://phab.mercurial-scm.org/D11658

rust: Reformat source code This fixes test-check-rust-format.t which is currently failing on the default branch. Differential Revision: https://phab.mercurial-scm.org/D11657

rhg: do not try to open a nodemap for an inline index This saves an [open] system call per file, which is a small saving, but it showed up in the profile at large file counts (it accounted for 30ms out of 400ms needed for catting 10000 files, on a ZFS filesystem on Linux, so ~3us per syscall). Differential Revision: https://phab.mercurial-scm.org/D11659

rhg: stop manifest traversal when no more files are needed Stopping the traversal early can skip a significant part of the manifest traversal, to avoid some of its cost. The worst-case benchmarks are favorable, as well. Running [hg cat] on the last file in the manifest of a large repo, I'm seeing a ~4ms improvement (150ms -> 146ms), so this time is now almost indistinguishable from the baseline ("brute force") implementation. Running [hg cat] on ~220 files together with the last file of the repo is further improved by ~5ms or so. I suspect the raw performance improvements are caused by splitting the manifest search and the file data access into separate phases, instead of interleaving them. Differential Revision: https://phab.mercurial-scm.org/D11616

rhg: faster hg cat when many files are requested With this patch I'm seeing a ~39ms improvement (220ms -> 181ms) when running [hg cat] on ~220 files in a ~260k-file repo. The timing for [hg cat] on an individual file becomes slightly worse (losing 5ms: 145ms -> 150ms). A follow-up commit is intended to improve that. Differential Revision: https://phab.mercurial-scm.org/D11615

dirstate-v2: Add support when Rust is not enabled This wires into `dirstatemap` the parser and serializer added in previous changesets. The memory representation is still the same, with a flat `dict` for `DirstateItem`s and another one for copy sources. Serialization always creates a new dirstate-v2 data file and does not support (when Rust is not enabled) appending to an existing one, since we don’t keep track of which tree nodes are new or modified. Instead the tree is reconstructed during serialization. Differential Revision: https://phab.mercurial-scm.org/D11520

dirstate-v2: Initial Python serializer This adds code seralizing a `map` and `copy_map` dicts into dirstate-v2 file formate. This is not used yet. Differential Revision: https://phab.mercurial-scm.org/D11519

dirstate-v2: initial Python parser The dirstate-v2 file format should be supported even if Rust extensions are not enabled. This changeset adds parsing code that is not used yet. Differential Revision: https://phab.mercurial-scm.org/D11518

dirstate: Move more methods to the _dirstatemapcommon base class This reduces duplication slightly and will help with supporting dirstate-v2 when Rust is not enabled. Differential Revision: https://phab.mercurial-scm.org/D11621

dirstate-v2: Add storage space for nanoseconds precision in file mtimes For now the sub-second component is always set to zero for tracked files and symlinks. (The mtime of directories for the `readdir`-skipping optimization is a different code path and already uses the full precision available.) This extra storage uses the space previously freed by replacing the 32-bit `mode` field by two bits in the existing `flags` field, so the overall size of nodes is unchanged. (This space had been left as padding for this purpose.) Also move things around in the node layout and documentation to have less duplication. Now that they have the same representation, directory mtime and file mtime are kept in the same field. (Only either one can exist for a given node.) Differential Revision: https://phab.mercurial-scm.org/D11655

status: Extract TruncatedTimestamp from fs::Metadata without SystemTime On Unix, the Rust standard library exposes `mtime` and `mtime_nsec` methods for `std::fs::Metada` whih is exactly what we need to construct a `TruncatedTimestamp`. This skips the computation in the conversion through `SystemTime` and `Result<Duration, Duration>`. Differential Revision: https://phab.mercurial-scm.org/D11654