test: do not use `which` to find an exec path in the test Posix is deprecated `which` in favor of `command -v`… which does not provide the same feature. Debian is warning about this deprecation and this get annoying. Differential Revision: https://phab.mercurial-scm.org/D11983

stream-clone: stop considering working copy only requirements Now that the ducks are properly aligned on there shelve, it becomes easy to fix the list of requirements to consider for stream. We remove the working copy specific ones and add some missing revlog specific ones. Differential Revision: https://phab.mercurial-scm.org/D11982

stream-clone: also filter the requirement we put in the bundle 2 We were wrongly putting irrelevant requirements in the bundle and the receiving side was getting confused, treating them as being missing while still putting them in the `requires` file. Leading do corrupted repositories. This changes fix stream-clone behavior regarding format when bundle-2 is involved, so we now also test this cases. Behavior with older version of Mercurial will be fine as they filter the requirements they get from the bundle on their side anyway. Differential Revision: https://phab.mercurial-scm.org/D12084

requirements: add an official `REVLOG_COMPRESSION_ZSTD` const Such constant was missing and its value was missing from the set of requirements that needs to be preserved through stream clone. This did not had any consequence yet as the "bundle 2 does not filter its requirements" is shadowing the issue. However we are now in a situation where we can fix this issue. So lets do it next. With the preparation work on test, changing the streamreqs value only impact two tests, where checking the full value seems to remains relevant. Important note: Since older version of Mercurial used the old `supportedformat` class attribute to check for stream requirement they supported, older version will consider this requirements to prevent them from using streaming clone. Even as they support this requirements for years. Pack for stable will be send to fix it, but they will have to be backported to older version if needed. Differential Revision: https://phab.mercurial-scm.org/D12083

stream-requirements: smoother matching in test-http-protocol.t The value of `streamreqs` changes depending of the format used, but this is not relevant for this tests. So we doing a smarter matching of the line to avoid this test interfering with format changes in the future. Differential Revision: https://phab.mercurial-scm.org/D12082

stream-requirements: smoother matching in test-ssh-bundle1.t The value of `streamreqs` changes depending of the format used, but this is not relevant for this tests. So we doing a smarter matching of the line to avoid this test interfering with format changes in the future. Differential Revision: https://phab.mercurial-scm.org/D12081

stream-requirements: smoother matching in test-ssh-proto.t The value of `streamreqs` changes depending of the format used, but this is not relevant for this tests. So we doing a smarter matching of the line to avoid this test interfering with format changes in the future. Differential Revision: https://phab.mercurial-scm.org/D12080

stream-requirements: smoother matching in test-hgweb-commands.t The value of `streamreqs` changes depending of the format used, but this is not relevant for this tests. So we doing a smarter matching of the line to avoid this test interfering with format changes in the future. Differential Revision: https://phab.mercurial-scm.org/D12079

stream-requirements: smoother matching in test-treemanifest.t The value of `streamreqs` changes depending of the format used, but this is not relevant for this tests. So we doing a smarter matching of the line to avoid this test interfering with format changes in the future. Differential Revision: https://phab.mercurial-scm.org/D12078

stream-requirements: smoother matching in test-ssh-proto-unbundle.t The value of `streamreqs` changes depending of the format used, but this is not relevant for this tests. So we doing a smarter matching of the line to avoid this test interfering with format changes in the future. Differential Revision: https://phab.mercurial-scm.org/D12077

test-bundle: split some variant in there own section Same rational as the previous commit about test-bundle.t. These line are quite volatile and having dedicated block will make their update clearer and simpler. Differential Revision: https://phab.mercurial-scm.org/D12076

test-bundle: split each variant in there own section Having conditional line matching for this kind of big block is quite inconvenient to update. The new way should be simpler to maintain. Differential Revision: https://phab.mercurial-scm.org/D12075

test-http-bad-server: abstract the `streamreqs` value Now that socket closing are decided much closer to the actual closure, we can use fuzzy matching for this part of the exchange that changes on a regular basis. This should make fixing bug in stream requirements and enabling new format much simpler. Differential Revision: https://phab.mercurial-scm.org/D12074

test-http-bad-server: use the new pattern-reading for a test-case This test case is now less sensitive to change of unrelated bits of the client/server exchange. Since this introduce some churn in the output, we do it independently for each test cases. This patch is the last of such changes, for both sent and recv cases. Differential Revision: https://phab.mercurial-scm.org/D12073

test-http-bad-server: use the new pattern-reading for a test-case This test case is now less sensitive to change of unrelated bits of the client/server exchange. Since this introduce some churn in the output, we do it independently for each test cases. Differential Revision: https://phab.mercurial-scm.org/D12072

test-http-bad-server: use the new pattern-reading for a test-case This test case is now less sensitive to change of unrelated bits of the client/server exchange. Since this introduce some churn in the output, we do it independently for each test cases. Differential Revision: https://phab.mercurial-scm.org/D12071

test-http-bad-server: use the new pattern-reading for a test-case This test case is now less sensitive to change of unrelated bits of the client/server exchange. Since this introduce some churn in the output, we do it independently for each test cases. Differential Revision: https://phab.mercurial-scm.org/D12070

test-http-bad-server: use the new pattern-reading for a test-case This test case is now less sensitive to change of unrelated bits of the client/server exchange. Since this introduce some churn in the output, we do it independently for each test cases. Differential Revision: https://phab.mercurial-scm.org/D12069

test-http-bad-server: introduce socket closing after reading a pattern We introduce the `close-after-recv-patterns` option. It has the same goal as `close-after-send-patterns` with a slightly different implementation. Reading "up to a pattern" is hard. As we can only check the pattern from what we have already read (inlike writing, were we can check what we are about to write). So instead we make the `close-after-recv-patterns` alter the behavior of the existing `close-after-recv-bytes`. The value from `close-after-recv-bytes` only gets into play after we have seen the pattern from `close-after-recv-patterns`. This allow us to achieve the target benefit without changing the read pattern too much. Differential Revision: https://phab.mercurial-scm.org/D12068

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12067

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12066

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12065

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12064

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12063

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12062

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12061

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12060

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12059

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12058

test-http-bad-server: move on test from bytes-count to pattern This specific test case is now using the new "close when a pattern is seen" approach compared to the more fragile "that many bytes were sent" approach. Since such change are still a bit noisy, we split each change in there own changesets. Differential Revision: https://phab.mercurial-scm.org/D12057