bundle: do no check the changegroup version if no changegroup is included We don't need to check the compatibility of something we will not use. In practice this was getting in the was of `streamv2` bundles on a narrow repository as the 'cg.version=02' value was rejected by this checks.

perf-stream-consume: use the source repository config when applying This might contains critical configuration for the benchmark, like enabling of extensions like narrow.

unbundle: move most of the logic on cmdutil to help debug::unbundle reuse This make sure `hg debug::unbundle` focus on the core logic.

postincoming: move to cmdutil This looks like a good place for it to live.

postincoming: avoid computing branchhead if no report will be posted This otherwise defeat some of the branch v3 optimization.

streamclone: stop listing files for entries that have no volatile files This will save a lot of python related time. This significantly boost performance. The following number comes from a large private repository using perf::stream-locked-section: base-line: 35.04 seconds prev-change: 24.51 seconds (-30%) prev-change: 20.88 seconds (-40%) prev-change: 14.22 seconds (-60%) this-change: 11.58 seconds (-67% from baseline; -18% from prev)

stream-clone: disable gc for the initial section for the v3 format The number of small container created turn Python in a gc-frenzy that seriously impact performance. This significantly boost performance. The following number comes from a large private repository using perf::stream-locked-section: base-line: 35.04 seconds prev-change: 24.51 seconds (-30%) prev-change: 20.88 seconds (-40%) this-change: 14.22 seconds (-60% from baseline; -31% from prev)

stream-clone: disable gc for `_entries_walk` duration The number of small container created turn Python in a gc-frenzy that seriously impact performance. This significantly boost performance. The following number comes from a large private repository using perf::stream-locked-section: base-line: 35.04 seconds prev-change: 24.51 seconds (-30%) this-change: 20.88 seconds (-40% from baseline; -15% from previous changes)

nocg: make the utility work are both a decorator and context manager In some case, the context manager version will be simpler.

stream-clone: stop getting the file size of all file in v3 The point of v3 is to do less work in the locked section. It was currently not the case. This significantly boost performance. The following number comes from a large private repository using perf::stream-locked-section: base-line: 35.03 seconds this-change: 24.50 seconds (-30%)

stream: in v3, skip the "size" fast path if the entries as some unknown size We are about to prefetch size during the lock less in the v3 case. So we need to avoid trying to use that prefetched size when it is not available. See next changeset for the motivation.

perf-stream-locked-section: advertise the right version key in the help As the v3 format is still experimental, its key is "v3-exp". The help text was not pointing that out. (we also fix `perf::stream-generate` in the process)

perf-stream-locked-section: fix the call to the v3 generator That generator simply return chunks so we should not assign the return to a tuple.

perf-stream-locked-section: actually use v1 generation when requested We were fetching a v1 generator but actually using the v2 function…

branching: merge stable into default

Added signature for changeset 803e61387e86

Added tag 6.7.2 for changeset 803e61387e86

relnotes: add 6.7.2

bundle2: make the "hgtagsfnodes" part advisory This bundle2 part is about helping the client to warms its cache. There is no reason for it to be mandatory. So we mark it advisory.

branching: merge stable into default

branchcache: allow to detect "pure topological case" for branchmap We don't rum this detection every time we run the branchcache, that would be costly. However we now do it when running `hg debugupdatecache`. This will help existing repository to benefit from the fastpath when possible.

branchcache: add a "pure topological head" fast path In a narrow but actually quick common case, all topological heads are all on the same branch and all open. In this case, computing the branch map is very simple. We can quickly detect situation where this situation will not change. So we update the V3 format to be able to express this situation and upgrade the update code to detect we remains in that mode. The branch cache is populated with the actual value when the branch map is accessed, but the update_disk method can do the update without needing to populate it.

branchcache: move the processing of the new data in a dedicated method In a future changeset, this will allow the V3 of the branch cache to use a fast path when possible.

branchcache: gather newly closed head in a dedicated set This is part of a series to more clearly split the update in two step. This will allow us to introduce a fast path during update in a future changeset.

branchcache: gather new obsolete revision in a set This is part of a series to more clearly split the update in two step. This will allow us to introduce a fast path during update in a future changeset.

branchcache: filter obsolete revisions sooner Since we won't do anything with the obsolete revisions, we can just ignore them sooner.

branchcache: skip entries that are topological heads in the on disk file In the majority of cases, topological heads are also branch heads. We have efficient way to get the topological heads and efficient way to retrieve their branch information. So there is little value in putting them in the branch cache file explicitly. On the contrary, writing them explicitly tend to create very large cache file that are inefficient to read and update. So the branch cache v3 format is no longer including them. This changeset focus on the format aspect and have no focus on the performance aspect. We will cover that later.

branchcache: simplify the branch rev cache test We don't need that many content dump and this gets in the way in change in access pattern (e.g. accessing revision in a different order change the order of branches in the "names" file). So we simplify this test in advance.

branchcache: store filtered hash and obsolete hash independently for V3 This will avoid the bug covered in tests/test-branches-obsolete.t when we stop storing all heads explicitly in V3.

branchcache: show the cache file content in test-branches-obsoletes.t This help to track the changes in format between v2 and v3.

branchcache: rework the `filteredhash` logic to be more generic We now have a more flexible `key_hashes` tuple. We duplicated various logic in the V2 and V3 version of the cache as the goal is to start changing the logic for V3 in the next few changesets.

filteredhash: rename the filteredhash function The new name is less ambiguous, as we are about to introduce an alternative function it seems like a good idea to have clearer name to distinct the two.

filteredhash: split the computation of revision sets The branch2's filteredhash combines the filtered revisions and the obsolete ones, this will creates issue for implicit reference to heads we want to introduce for the v3 of the branch cache format. So we isolate this logic for alternative use.

filteredhash: move the hashing in its own function This will help us to reuse this logic in variants of the hashes used for branch cache validation.

branchcache: cleanup the final key generation after update A lot of duplicated work seemed to be done, as we already update the tiprev and tipnode when needed right before. So we simplify that part to focus on the filtered hash. See inline comment for details.

branchcache: add more test for the logic around obsolescence and branch heads While working on branch-cache-v3, we noticed some ambiguity in the filtered+obsolete hash. However this was only caught by a rebase test by chance. It seems important to explicitly tests these cases.

branchcache-v3: use more explicit header line The key-value approach is clearer and gives more rooms to have the format evolve in a clear way. It also provides extension (like topic) simpler way to extend the validation scheme. This is just a small evolution, the V3 format is still a work in progress.

branchcache-v3: introduce a v3 format For now the format is the very same, however we will start changing it in future changesets.

branchcache: use an explicit class for the v2 version This prepare the introduction of an experimental v3 format version. In the process, we move the description of the format in that new class.

branchcache: add some blank line in a test This helps each section to stand out.

phases: update the phase set as we go during retract boundary Apparently iterating over the `changed_revs` dictionary is very expensive. On mozilla-try-2019-02-18, a perf::unbundle call with a 10 000 changesets bundle gives give use the following timing. e57d4b868a3e: 4.6 seconds ac1c75188440: 102.5 seconds prev-changeset: 30.0 seconds this-changeset: 4.6 seconds So, the performance regression is gone. Once again: thanks to marvelous Python!

phases: avoid a potentially costly dictionary interation in some case If we retract for the draft phase, there is not non-public item to be retracted and we can skip this part. This part is was apparently super costly thanks to Python. On mozilla-try-2019-02-18, a perf::unbundle call with a 10 000 changesets bundle gives give use the following timing. e57d4b868a3e: 4.6 seconds ac1c75188440: 102.5 seconds this-changeset: 30.0 seconds So we recovered about ⅔ of the regression, the next changeset will give us the rest back.

branching: merge stable into default

Added signature for changeset 2e6fde2ed01e

Added tag 6.7.1 for changeset 2e6fde2ed01e

relnotes: add 6.7.1

subrepo: fix normalizing paths with scheme After revision 0afe96e374a7, subrepo paths were normalized using posixpath.normpath and that resulted in ssh paths being wrongly converted from ssh://host/path to ssh:/host/path This fix applies the same logic used in urlutil.url to split the path scheme from the rest and only use posixpath.normpath to the string after scheme://

sshpeer: fix path when handling invalid url exception In 73ed1d13c0bf the code was refactored but the error handling seems to have been missed (or maybe the object shoud have implemented __bytes__)