context: use includematcher when checking dir/file conflicts This is for performance; patternmatcher can't easily interpret its results to make visitchildrenset be the "optimal" set of paths to inspect, but includematcher can. Since there aren't any special patterns being used here, I believe that the two matchers are equivalent. Differential Revision: https://phab.mercurial-scm.org/D5999

tests: change the paths slightly in test-rebase-inmemory.t c/c was a little difficult to understand (and verify that it was the *correct* 'c/' that was being talked about), and it's useful to have multiple directories to prove that we are able to detect this even if there's no files (just a subdirectory) in the immediate directory that's conflicting. Differential Revision: https://phab.mercurial-scm.org/D5998

rust-cpython: using rustext.dagop.headrevs in revlog As with the previous oxidation series, revlog plays the role of the factory, either using its parents function, or passing the index. We include below results of revsetbenchmarks.py taken on the PyPy repository on those of contrib/all-revsets.tx that involve `heads()`. In most of the cases, this seems to be either neutral or an improvement. In the cases where it's actually a bit slower, we suspect that differences in `heads()` performance is actually burried in variance on the incoming revset (probably several orders of magnitude slower). The precheck for filtered revisions of parent changeset has a significative performance benefit, too. Result by revset ================ Revision: 0) 0c7b353ce100; rust-cpython: binding for headrevs() 1) Parent of this changeset; changelog: prefilter in headrevs() 2) This changeset revset #0: heads(commonancestors(last(head(), 2))) plain min max first last reverse rev..rst rev..ast sort sor..rst sor..ast 0) 0.001379 0.001361 0.001381 0.001410 0.001393 0.001372 0.001414 0.001387 0.001411 0.001429 0.001415 1) 0.001351 0.001373 0.001383 0.001392 0.001401 0.001385 0.001405 0.001406 0.001385 0.001424 0.001399 2) 0.001365 0.001362 0.001375 0.001393 0.001370 0.001365 0.001413 0.001386 0.001377 0.001415 0.001411 revset #1: heads(commonancestors(head())) plain min max first last reverse rev..rst rev..ast sort sor..rst sor..ast 0) 0.047578 0.048578 0.047764 0.048065 0.047289 0.047305 0.047729 0.047370 0.047611 0.048005 0.047755 1) 0.048072 0.047471 0.048351 0.048193 0.048380 0.047968 0.047683 0.047355 0.048587 0.047044 0.048299 2) 0.047124 0.046699 0.046896 0.047250 0.046920 0.047379 0.046855 0.047753 0.047289 0.047219 0.046991 revset #2: heads(all()) plain min max first last reverse rev..rst rev..ast sort sor..rst sor..ast 0) 0.037654 0.037814 0.037149 0.037457 0.037609 0.037053 0.036825 0.037054 0.037739 0.036816 0.037604 1) 0.021845 58% 0.022172 58% 0.022148 59% 0.022059 58% 0.022261 59% 0.022246 60% 0.021691 58% 0.021967 59% 0.022156 58% 0.021820 59% 0.023141 61% 2) 0.014459 66% 0.014470 65% 0.014420 65% 0.014413 65% 0.014421 64% 0.014492 65% 0.014512 66% 0.014579 66% 0.014500 65% 0.014501 66% 0.014537 62% revset #3: heads(-10000:-1) plain min max first last reverse rev..rst rev..ast sort sor..rst sor..ast 0) 0.003696 0.003681 0.003719 0.003746 0.003725 0.003750 0.003692 0.003747 0.003712 0.003754 0.003763 1) 0.002131 57% 0.002142 58% 0.002147 57% 0.002203 58% 0.002143 57% 0.002208 58% 0.002158 58% 0.002182 58% 0.002169 58% 0.002209 58% 0.002201 58% 2) 0.001490 69% 0.001524 71% 0.001515 70% 0.001528 69% 0.001531 71% 0.001520 68% 0.001549 71% 0.001542 70% 0.001560 71% 0.001559 70% 0.001544 70% revset #4: (-5000:-1000) and heads(-10000:-1) plain min max first last reverse rev..rst rev..ast sort sor..rst sor..ast 0) 0.003832 0.003816 0.003747 0.003814 0.003749 0.003894 0.003784 0.003796 0.003915 0.003829 0.003795 1) 0.002282 59% 0.002208 57% 0.002220 59% 0.002240 58% 0.002210 58% 0.002276 58% 0.002250 59% 0.002250 59% 0.002311 59% 0.002230 58% 0.002241 59% 2) 0.001658 72% 0.001662 75% 0.001568 70% 0.001599 71% 0.001588 71% 0.001696 74% 0.001615 71% 0.001593 70% 0.001710 73% 0.001622 72% 0.001616 72% revset #5: heads(matching(tip, "author")) plain min max first last reverse rev..rst rev..ast sort sor..rst sor..ast 0) 7.826449 7.563260 7.581034 7.688493 7.634001 7.777860 7.768228 8.026097 7.767422 7.565254 7.938643 1) 7.750766 7.562555 7.660426 7.574089 7.492220 7.438582 7.562015 7.530635 93% 7.636343 7.636712 7.645113 2) 7.617941 7.519601 7.584922 7.507653 7.547440 7.524436 7.575291 7.883991 7.792142 7.709622 7.868595 revset #6: heads(matching(tip, "author")) and -10000:-1 plain min max first last reverse rev..rst rev..ast sort sor..rst sor..ast 0) 7.744489 7.728684 7.734065 7.928513 7.875949 7.883727 7.815492 7.791335 7.784793 7.761218 7.815731 1) 7.808956 7.480446 7.618759 7.920270 7.676343 7.803613 7.770210 7.713100 7.584420 7.767335 7.825140 2) 7.519987 7.938748 106% 7.805328 7.694162 7.750129 7.714229 7.603825 7.580734 7.555291 7.524207 7.504580 revset #7: (-10000:-1) and heads(matching(tip, "author")) plain min max first last reverse rev..rst rev..ast sort sor..rst sor..ast 0) 7.909321 7.694357 7.666021 7.538686 7.771821 7.876217 7.852103 7.812727 7.545919 7.788860 7.764585 1) 7.749232 7.683715 7.968393 7.895257 7.764160 8.314884 105% 7.921697 7.882613 7.867209 7.684707 7.544501 2) 7.824903 7.784605 7.727846 7.566613 7.581994 7.539205 90% 7.555316 7.535572 7.581786 7.901795 7.662832

changelog: prefilter in headrevs() In case where headrevs() is called on some revisions, we perform the check that aren't filtered in advance, and switch revlog to use its unchecked form. This allows to work with alternative implementations that don't have knowledge of the filtering system, such as the Rust one.

tests: fixed test too dependent on actual exception wording On one of the machines I use to run the tests prior to submission, the default Python is 2.7.5, with the following wording: must be encoded string without NULL bytes, not str This third form (and possible future ones) are motivation to use a wider catching regexp.

contrib: enforce wrapping too-long lines with () instead of \ This is the style I prefer, and an anecdotal exploration of styles recommended in style guides etc. Further, to quote pep8: > The preferred way of wrapping long lines is by using Python's implied > line continuation inside parentheses, brackets and braces. Long lines > can be broken over multiple lines by wrapping expressions in > parentheses. These should be used in preference to using a backslash > for line continuation. So I think this is a virtuous change. Differential Revision: https://phab.mercurial-scm.org/D5995

cleanup: prefer nested context managers to \-continuations I'd prefer Python accept a tuple of context managers, but alas it isn't meant to be. This will have to suffice. Differential Revision: https://phab.mercurial-scm.org/D5994

cleanup: use () to wrap long lines instead of \ This is a little less brittle, and often helps indentation. In a surprising number of cases the entire cleanup was deleting the \, as the expression was *already* parenthesized in a workable way. Differential Revision: https://phab.mercurial-scm.org/D5993

tests: use () instead of \ to wrap lines This should auto-format more consistently, and is slightly more typical Python. Differential Revision: https://phab.mercurial-scm.org/D5992

merge with stable

copies: do copy tracing based on ctx.p[12]copies() if configured This adds an option to do copy tracing in a changeset-optimized way. If the metadata is stored in filelogs, this is obviously going to be suboptimal. The point is that it provides a way of transitioning to changeset-stored metadata. Some of the tests behave a little differently, but they all seem resonable to me. The config option may very well be renamed later when it's clearer what options we want and how they will behave. When the test suite is run with --extra-config-opt to use the new copy tracing, all tests pass, besides test-copies.t (which fails in the same way as you can see in this patch). `hg debugpathcopies 4.0 4.8` reports 82 copies. With this option enabled, the only difference is this: -mercurial/pure/bdiff.py -> mercurial/cffi/bdiff.py +setup_bdiff_cffi.py -> mercurial/cffi/bdiff.py I believe that happened because it was renamed in different ways on different sides of a merge and the new algorithm arbitrarily prefers copies that happened on p1. The runtime is about 0.85 seconds with the old copy tracing and 5.7 seconds with the new copy tracing. That's kind of slow, but actually better than I had expected. Differential Revision: https://phab.mercurial-scm.org/D5991

context: introduce p[12]copies() methods and debugp[12]copies commands As mentioned earlier, I'm working on support for storing copy metadata in the changeset instead of in the filelog. In order to transition a repo from storing metadata in filelogs to storing it in the changeset, I'm going to provide a config option for reading the metadata from the changeset, but falling back to getting it from the filelog if it's not in the changeset. In this compatiblity mode, the changeset-optmized algorithms will be used. We will then need to convert the filelog copy metadata to look like that provided by changeset copy metadata. This patch introduces methods that do just that. By having these methods here, we can start writing changeset-optimized algorithms that should work already before we add any support for storing the metadata in the changesets. This commit also includes new debugp[12]copies commands and exercises them in test-copies.t. Differential Revision: https://phab.mercurial-scm.org/D5990

copies: filter out copies when target is not in destination manifest When chaining a series of commits that copied a file with a series that removed the destination file, we would still include the copy in the result. Similar to the previous patch, I have checked that `hg status --copies` is not affected by this bug, but I wouldn't be surprised if some commands are. Differential Revision: https://phab.mercurial-scm.org/D5989

copies: make _backwardrenames() filter out copies by destination As shown by the test case, _backwardrenames() doesn't filter by the matcher. It doesn't show up in `hg status --copies` because that only prints files changed between the two commits. I wouldn't be surprised if some other command that replies on pathcopies() was broken before this patch, but I haven't bothered to check other commands. Differential Revision: https://phab.mercurial-scm.org/D5988

copies: respect narrowmatcher in "parent -> working dir" case I don't know when this case happens and we don't seem to have tests for it, but let's fix it anyway since I happened to notice it. Differential Revision: https://phab.mercurial-scm.org/D5987

tests: add tests of pathcopies() I'm working on support for storing copy metadata in the changeset instead of in the filelog. When storing it in the changeset, it will obviously be efficient to get the copy metadata for all files in a single changeset, but it will be more expensive to get the copy metadata all revisions of a single file. Some algorithms will then need to be optimized differently. The first method I'm going to rewrite is pathcopies(). This commit adds many tests for pathcopies(), so we can run the tests with both old and new versions of the code, as well as with metadata stored in filelog or in changeset (later). They use the debugpathcopies command I recently added (with no tests when it was added). They show a few bugs and few cases of slightly weird behavior. I'll fix the bugs in the next few commits. Differential Revision: https://phab.mercurial-scm.org/D5986

uncommit: add config option to keep commit by default We have a Google-internal extension that keeps track of "review units" (like Phabricator reviews, or Gerrit's Change-Id). This information is stored outside of the commit. It is updated with rewrites. Every now and then we get reports from users who are confused because `hg uncommit` lost track of their review. Keeping the empty commit by default would reduce this confusion. It may also cause confusion about the empty commit. This patch adds a config option that lets us easily test both behaviors on our users. Differential Revision: https://phab.mercurial-scm.org/D5970

debugpathcopies: sort output so it's deterministic Differential Revision: https://phab.mercurial-scm.org/D5983

subrepo: use root-repo-relative path from `hg files` with ui.relative-paths=no The fix is to pass in a "subuipathfn" as we do everywhere else. Differential Revision: https://phab.mercurial-scm.org/D5978

subrepo: demonstrate broken `hg files` with ui.relative-paths=no Differential Revision: https://phab.mercurial-scm.org/D5977

py3: whitelist 5 new passing tests caught by buildbot Thanks to indygreg and durin42 recent patches. Differential Revision: https://phab.mercurial-scm.org/D5979

uncommit: inform user if the commit is empty after uncommit Differential Revision: https://phab.mercurial-scm.org/D5969

test: stabilize test-run-tests.t output We have reached a point where the duration in JSON reports of `test-run-tests.t` were greater or equal than 10 seconds, which doesn't match anymore the regex. For example here: https://ci.octobus.net/blue/organizations/jenkins/MercurialPy2/detail/MercurialPy2/276/pipeline ``` "diff": "", ? (re) - "end": "\s*[\d\.]{4,5}", ? (re) + "end": "10.040", "result": "skip", ? (re) ``` Instead of accepting more characters, I changed the regex to accept any number of digits before the `.` then 3 or 4 digits after. This way the regex is more precise (only one `.` is authorized and we can ensure that the precision doesn't change). Differential Revision: https://phab.mercurial-scm.org/D5966

test: stabilize test-remotefilelog-bgprefetch.t flaky output When running the test suite with multiple processes, we often get flaky outputs, like here: https://ci.octobus.net/job/MercurialPy2/274/console ``` - $TESTTMP/hgcache/master/packs/8f1443d44e57fec96f72fb2412e01d2818767ef2.histidx - $TESTTMP/hgcache/master/packs/8f1443d44e57fec96f72fb2412e01d2818767ef2.histpack - $TESTTMP/hgcache/master/packs/f4d50848e0b465e9bfd2875f213044c06cfd7407.dataidx - $TESTTMP/hgcache/master/packs/f4d50848e0b465e9bfd2875f213044c06cfd7407.datapack + $TESTTMP/hgcache/master/11/f6ad8ec52a2984abaafd7c3b516503785c2072/1406e74118627694268417491f018a4a883152f0 + $TESTTMP/hgcache/master/11/f6ad8ec52a2984abaafd7c3b516503785c2072/ef95c5376f34698742fe34f315fd82136f8f68c0 + $TESTTMP/hgcache/master/39/5df8f7c51f007019cb30201c49e884b46b92fa/69a1b67522704ec122181c0890bd16e9d3e7516a + $TESTTMP/hgcache/master/95/cb0bfd2977c761298d9624e4b4d4c72a39974a/076f5e2225b3ff0400b98c92aa6cdf403ee24cca + $TESTTMP/hgcache/master/af/f024fe4ab0fece4091de044c58c9ae4233383a/bb6ccd5dceaa5e9dc220e0dad65e051b94f69a2c ``` Add some sleeps after `debugwaitonrepack` calls as it seems it needs some extra time to cleanup. Differential Revision: https://phab.mercurial-scm.org/D5960

merge with stable

color: change color of grep.rev label (BC) GNU grep uses green for line numbers as we do, but I sometimes get a bit confused when I do `hg grep --diff -n` and get both line numbers and revisions and don't know which one is which. A different colour can help.

color: give colours to the grep.inserted and grep.deleted labels I find the "bold" makes it stand out a bit more when the green is next to the line number. Note that these labels are applied before the grep.change label, which is now disabled. To get the old colour, users can restore [color] grep.change = green dim to their hgrc.

grep: give different labels to + and - symbols I find it more useful to give different colours to plus and minus, but it's difficult to do so if the default output uses the same label for both. The following augments the names of columns with some extra labels, akin to the diff.inserted and diff.deleted labels for the diff command. This is done by adding an extra label field to the columns tuples.

tests: bulk changes to avoid whitespace errors of check-code.py This is a part of preparation to apply checking with check-code.py on code fragments embedded in *.t test scripts. This revision avoids "whitespace" errors of check-code.py below: - missing whitespace after "," - missing whitespace in expression - no whitespace around "=" for named parameters - wrong whitespace around "="

tests: replace "naked except clause" to avoid check-code.py error This is a part of preparation to apply checking with check-code.py on code fragments embedded in *.t test scripts.

tests: bulk changes to avoid "omit superfluous pass" check-code.py error This is a part of preparation to apply checking with check-code.py on code fragments embedded in *.t test scripts.

tests: replace imported module to avoid check-code.py error This is a part of preparation to apply checking with check-code.py on code fragments embedded in *.t test scripts.

tests: bulk change to avoid "unneeded trailing ',' ..." error of check-code.py This is a part of preparation to apply checking with check-code.py on code fragments embedded in *.t test scripts. "trailing ','" at the end of command option list in the code fragment of test-bundle2-format.t is still left as it is, in order to follow the style of command definitions in Mercurial core.

tests: define class in modern style to avoid check-code.py error This is a part of preparation to apply checking with check-code.py on code fragments embedded in *.t test scripts.

tests: use NO_CHECK_EOF as heredoc limit mark to omit checking code fragments This is a part of preparation to apply checking with check-code.py on code fragments embedded in *.t test scripts. "primes.py" embedded in test-highlight.t causes an error of check-commit.py below: don't use .next(), use next(...) But changing embedded primes.py is painful, because it is committed in test script, and affects hash IDs. On the other hand, primes.py itself is never executed in test script. Therefore, this patch uses NO_CHECK_EOF as heredoc limit mark in order to omit any checking on this code fragments.

tests: conditionalize msys path mangling in test-bundle.t This broke in 252cc56c9ff6 when the variables were printed one per line. The only reason I can think of is that MSYS knew the former string couldn't be a list of paths, but thinks this form is.

tests: glob over quoting differences in test-blackbox.t for Windows

chistedit: ensure a locale is set My paternal surname was showing incorrectly without this fix.

templatekw: make negrev return empty for wdir() and nullrev I considered just returning the same output that {rev} returns here, but {rev} also returns essentially gibberish: either an INT_MAX-kind of variable for wdir() or -1 for null. Since these are numbers that are intended to be used for calculations, and since the numbers for wdir() and -1 are not really very helpful for calculation (and worse, when used as a revision number -1 is equal to unhidden tip), I figured the most reasonable thing to do here is to just return nothing for negrev. This could potentially break scripts that are expecting to parse a nonempty integer out of a {negrev}, but that seems like a very remote concern at this juncture.

test-sqlitestore: run sqlite3 with no init file These tests were failing for me because I have a ~/.sqliterc that alters the default output. Tests should ignore any init file.

tests: add a missing abort exit code on Windows in test-audit-subrepo.t

subrepo: add test for Windows relative-ish path with drive letter Matt Harbison pointed out that Windows had some weird path syntax. Fortunately it's rejected appropriately by pathauditor, so we're safe. Let's test the behavior as we have a special handling for Windows drive letters. This patch includes a basic example. Maybe we'll need to extend the test case further, but writing such tests on Linux isn't easy.

copies: return True instead of filename as it is expected to return boolean As the function documentation says this function should True if we hit a match and False otherwise. And I see that we are not using that returned filename anywhere. Differential Revision: https://phab.mercurial-scm.org/D5964

narrow: fix command name in error messsage Differential Revision: https://phab.mercurial-scm.org/D5982

templatekw: add a {negrev} keyword Revision numbers are getting much maligned for two reasons: they are too long in large repos and users get confused by their local-only nature. It just occurred to me that negative revision numbers avoid both of those problems. Since negative revision numbers change whenever the repo changes, it's much more obvious that they are a local-only convenience. Additionally, for the recent commits that we usually care about the most, negative revision numbers are always near zero. This commit adds a negrev templatekw to more easily expose negative revision numbers. It's not easy to reliably produce this output with existing keywords due to hidden commits while at the same time ensuring good performance.

tests: correct the remaining fallout from recent path style changes on Windows Per @martinvonz, `ui.slash` set by the test runner is now capable of playing a more active role.[1] I verified that both of these work by setting `ui.slash` to False, but these changes seem cleaner. The problem with check-perf-code.py was that the proper imports were not being whitelisted due to '\' vs '/'. [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2019-February/128701.html

templates: adding a config() function for template customization This allows templates to be written such that users can customize them easily, or that they can be customized based on other configuration of the system. For enterprise deployments, we often have complex template aliases, and right now the only way individual users can customize those is by replacing the whole template alias (which means they won't get company-wide updates to it anymore, plus most users don't want to have to get a complex template right). With this change, they can just set a config option which feeds into our templates for common changes (e.g. whether to limit commit descriptions to the width of their terminal or not). To work around the issue of having to register the config options, I declared a dedicated section [templateconfig] for these options to be dynamically declared. They can still reference any other config option that's registered elsewhere. I only did string, bool and int at this time - list and date would add other complications with parsing the default so I'll leave that as an exercise to the reader :) Differential Revision: https://phab.mercurial-scm.org/D5959

changegroup: don't try to prune manifest nodes if not ellipses In non-ellipses case, the number of manifest nodes can be very big, and finding whether one of them can be pruned or not is very costly. For each node, we try to find the rev and the linkrev, which is expensive. Sending bit more manifest nodes seems better and much faster here. On our internal repository, this saves around 5 seconds on `hg tracked --addinclude <some_path>` on a narrow repo with ellipses disabled. Differential Revision: https://phab.mercurial-scm.org/D5782

branchmap: improve doc about BranchMapCache class It was confusing that we are having two different branchcache and BranchMapCache classes. The doc in BranchMapCache class was not much helpful to understand the difference. This patch improves the doc there. Differential Revision: https://phab.mercurial-scm.org/D5933

rust: itering less on MissingAncestors.bases for max() Instead of iterating on the whole `self.bases` each time to find its max, we keep the latter in a separate member attribute and keep it up to date in `add_bases()` On a perfdiscovery done on PyPy, with repos prepared with `contrib/discovery-helper.sh 50 100`, this gives a slight improvement (around 0.5% on wall time, but 10% on CPU) before: ! wall 0.172801 comb 0.180000 user 0.180000 sys 0.000000 (median of 541) after: ! wall 0.171798 comb 0.160000 user 0.160000 sys 0.000000 (median of 551) (perf command run time upped because of bigger variability during this test). Differential Revision: https://phab.mercurial-scm.org/D5945

rust: stop putting NULL_REVISION in MissingAncestors.bases As noted in initial review of MissingAncestors, adding NULL_REVISION in constructor in case the given `bases` is empty wasn't really useful, yet it's been kept for identity with the Python implementation Differential Revision: https://phab.mercurial-scm.org/D5944

rust: less set lookups in MissingAncestors using the return values of HashSet::remove(), we can factor pairs of `contains()/remove()` into a single `remove()`. On a perfdiscovery run done on the PyPy repository, prepared with contrib/discovery-helper.sh 50 100, I do get a modest improvement with this (mean of medians of three runs is better by 2%) Sample readings, before this change: ! wall 0.175609 comb 0.180000 user 0.180000 sys 0.000000 (median of 58) With this change: ! wall 0.171662 comb 0.180000 user 0.170000 sys 0.010000 (median of 60) Differential Revision: https://phab.mercurial-scm.org/D5943

rust: less set lookups in AncestorsIterator This uses the boolean return of `HashSet::insert()` to factor pairs of contains()/insert() into a single insert() On the mozilla-central repository (450k changesets), I get about a bit more than 10% better medians in perfancestors (taking the mean of three runs) Best run for parent changeset: ! wall 0.106474 comb 0.110000 user 0.110000 sys 0.000000 (median of 93) Best run for this changeset: ! wall 0.093191 comb 0.090000 user 0.090000 sys 0.000000 (median of 100) Differential Revision: https://phab.mercurial-scm.org/D5942

obsutil: don't assume leftctx and rightctx repo as same Backed out changeset 520514af2d93. hgsubversion can pass leftctx and rightctx which are instances of two different repositories. This was making tests fail on hgsubversion with 4.9. The two different instances are: (Pdb) p rightctx.repo() <filteredrepo:served <hgsubversion.svnrepo.svnlocalrepo object at 0x7fe29d296d10>> (Pdb) p leftctx.repo() <filteredrepo:visible <hgsubversion.svnrepo.svnlocalrepo object at 0x7fe29d494590>> Differential Revision: https://phab.mercurial-scm.org/D5968

tests: add more wildcards to test-extdiff.t The diff tool (which is `echo`) runs in the background and output order can therefore be non-deterministic. We need to glob over the file names to account for this. Differential Revision: https://phab.mercurial-scm.org/D5976

url: don't pass strict argument on Python 3 The argument was removed in Python 3.4. Differential Revision: https://phab.mercurial-scm.org/D5975

url: always use str for proxy configuration Previously, proxies didn't work on Python 3 for various reasons. First, the keys to the "proxies" dict are fed into a `setattr(self, "%s_open", ...)` call and passing bytestrings results in setting an oddly named attribute due to the b'' in %s formatting. This resulted in "http_open" and "https_open" not being properly overridden and proxies not being used. Second, the standard library was expecting proxy URLs to be str. And various operations (including our custom code in url.py) would fail to account for the str/bytes mismatch. This commit normalizes everything to str and adjusts our proxy code in url.py to account for the presence of str on Python 3. Differential Revision: https://phab.mercurial-scm.org/D5952

py3: port tinyproxy.py to work with Python 3 There were various str/bytes mismatches in the code. This caused the proxy server to misbehave at run-time. The manifestation was typically premature socket disconnect from the perspective of the client. Differential Revision: https://phab.mercurial-scm.org/D5951

url: always access req._tunnel_host The getattr() was there to handle Python versions before 2.6, which lacked this attribute. We /might/ be able to further delete some code here. However, the behavior here is extremely hard to follow because large parts of this code duplicate code from the Python standard library and it is difficult to understand what is actually needed. Differential Revision: https://phab.mercurial-scm.org/D5950

tests: double escape \ in test-import-eol.t and test-mq-eol.t The shell eats the \\. Differential Revision: https://phab.mercurial-scm.org/D5974

tests: use raw string in test-impexp-branch.t On first glance, the escaping of \s seems correct. However, the shell eats the escape and we're left with '\s` in the written file. Let's use a raw string so we don't have to double escape. Differential Revision: https://phab.mercurial-scm.org/D5973

phabricator: make user searches case-insensitive User names in conduit are case insensitive, but when looking for "FOO" it would return "foo" instead and we'd think the user didn't exist. So lower case both the query and the response when comparing them. Differential Revision: https://phab.mercurial-scm.org/D5934

exchange: raise error.Abort instead of ValueError Raising ValueError results in an uncaught exception and a traceback being printed. In the context of servers, it can result in an HTTP 500 and an exception being logged in the error log. I don't think this is proper behavior. The bundle2 code paths have a mechanism for translating an error.Abort into an error message reported to the clients. I think we should use that instead. This commit replaces some ValueError with Abort so that servers can error more gracefully. Differential Revision: https://phab.mercurial-scm.org/D5972

tests: remove -q from test-lfs-serve.t This will make it easier to observe a behavior change in the next commit. Differential Revision: https://phab.mercurial-scm.org/D5971

chistedit: use magenta for current line as in crecord (issue6071) It was inconsistent in the UI to have different way to show the current line.

chistedit: improve proper username in histedit curses interface in changeset section (issue6072) Differential Revision: https://phab.mercurial-scm.org/D5967

crecord: remove obsolete version check An internal function shouldn't be checking compatibility with Mercurial versions.

histedit: remove "chistedit" mention from interface "chisted" is internal jargon. The end user should not need to be aware that it's different from histedit.

revset: improve documentation on expectsize() This is a follow-up patch to D5813. It improves the documentation of `expectsize(set, size)`. Differential Revision: https://phab.mercurial-scm.org/D5953

scmutil: fix a comment that doesn't match the code Differential Revision: https://phab.mercurial-scm.org/D5956

remotefilelog: remove strkwargs() The previous commit activated previously unused code paths on Python 3 and revealed that we were calling strkwargs() on a dict that already had str keys. The only caller of _forceprefetch() is _adjustlinknode() a few lines up and the static commonlogkwargs dict features str keys. Differential Revision: https://phab.mercurial-scm.org/D5958

remotefilelog: use raw strings when looking for variable names Keys in self.__dict__ and vars() are always str. So we need to use raw strings to ensure lookups work on Python 3. # skip-blame just r'' prefixes Differential Revision: https://phab.mercurial-scm.org/D5957

rust-cpython: binding for headrevs() This uses the core `dagops::retain_heads` to give a Rust implementation to `mercurial.dagop.headrevs`. Testing happens for now from `test-rust-ancestors.py` (for quick and minimal change), but it'd made more sense to put the binary index data elsewhere and to create a new test python module

rust-cpython: moved py_set() utility to conversion module We're still hoping to get rid of it eventually, but we're going to need it from outside the `ancestors` module before that.

rust: translated random test of missingancestors This is a Rust implementation of the random DAG generator and related incrementalmissingancestors tests against a naive brute force implementation. It is provided as an integration test, so that it won't run by default if any unit test fails. In case of a failed example, all needed information for reproduction is included in the panic message, (this is how `test_remove_ancestors_from_case1()` has been generated), as well as the random seed. The whole test is rerunnable by passing the random seed in the TEST_RANDOM_SEED environment variable. The other parameters (numbers of iterations) can be passed in the TEST_MISSING_ANCESTORS environment variable. An alternative would have been to expose to Python MissingAncestors<VecGraphs> but that would have meant pollution of the release build used from Python, whereas we do it in this changeset within the tests submodule Differential Revision: https://phab.mercurial-scm.org/D5417

debugpathcopies: fix typo in synopsis Differential Revision: https://phab.mercurial-scm.org/D5949

debugrename: don't require at least one path I don't see a reason that it needs to require a path. Most commands match everything when no paths are given, but here you have to do something like `hg debugrename -r . .` (from the repo root) to match everything. Differential Revision: https://phab.mercurial-scm.org/D5948

revlog: use iterbytestr() Otherwise we iterate over integers in Python 3 and the character compare fails. Differential Revision: https://phab.mercurial-scm.org/D5947

commit: respect ui.relative-paths The command usually doesn't print any paths, but there are some warnings and verbose messages that includes paths. Differential Revision: https://phab.mercurial-scm.org/D5939

resolve: slightly simplify join expression by joining with empty strings Differential Revision: https://phab.mercurial-scm.org/D5938

resolve: respect ui.relative-paths also for warning messages I guess this should have been part of 72a9aacff645 (resolve: respect ui.relative-paths, 2019-01-29). Differential Revision: https://phab.mercurial-scm.org/D5937

addremove: respect ui.relative-paths I previously changed these code paths while trying to not change any behavior to avoid inconsistencies between them in the intermediate commits. They're now all ready to be switched over to respecting ui.relative-paths. Differential Revision: https://phab.mercurial-scm.org/D5936

windows: use util.localpath for repo-relative paths in getuipathfn() Now that we have a single place that translates from internal path representation (slash-separated) to UI representation (i.e. scmutil.getuipathfn()), let's switch that over to using util.localpath for absolute paths. I don't expect any test impact on Windows because we still respect ui.slash, which is set by the test runner. As Yuya pointed out, a997163e7fae (status: extract helper for producing relative or absolute path for UI, 2019-01-29) accidentally changed to slash-separated paths on Windows because it used used to use repo.pathto(f, cwd='') (which calls util.localpath()) and after that patch it just prints the filename without any transformation. This patch should fix that regression. Differential Revision: https://phab.mercurial-scm.org/D5935

walkchangerevs: obey allfiles parameter when taking the slow path When walkchangerevs sees that there's a pattern, it hits the slow path. The slow path in turn reverts to the old dumb grep behaviour of only looking at files changed at each revision. Therefore, a command such as hg grep -l --all-files '.*' 'glob:**' would show you all the nonempty files touched by the current revision. This modifies that behaviour to look at the manifest at each revision instead of the changed files in case that --all-files was requested.

test: stabilize test-wireproto-exchangev2.t flaky output When running the test suite with multiple processes, we often get flaky outputs, like here: https://ci.octobus.net/job/MercurialPy2/267/console ``` - received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos) add changeset cd2534766bec add changeset e96ae20f4188 add changeset caa2a465451d + received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos) ``` Instead of simply sorting the clone and pull output, I saved the output in a separate file and checked the `received frame` messages on one side and then the rest of the output on the other side. This way we conserve the order of messages as it seems important. Differential Revision: https://phab.mercurial-scm.org/D5897

zsh: fix `hg resolve` completion when in a subdirectory (issue6067) Differential Revision: https://phab.mercurial-scm.org/D5836

revset: add expectsize to check the size of a set `expectsize(<set>, <int>)` revset fails if `<set>` is not exactly `<int>` elements. `expectsize(<set>, <min>:<max>)` revset fails if `<set>` is not exactly between `<min>` and `<max>` inclusive. This then allows an alias for `hg next` to be `update -r one(children(.))` with sane failure behavior, and also makes some other scripting tasks a little less difficult. (Summary from WeShouldDoThat) Differential Revision: https://phab.mercurial-scm.org/D5813

merge with stable

branchmap: decode a label only once This moves decoding of a label out of for loop. Minor speed up expected in cases when one branch has multiple heads. For example: someone using bookmarks as branches and hence ending up with multiple heads on default branch. Differential Revision: https://phab.mercurial-scm.org/D5932

branchmap: move __init__ up in branchcache class Making __init__ the first function defined helps understanding the class much better. Differential Revision: https://phab.mercurial-scm.org/D5931

match: delete unused root and cwd arguments from {always,never,exact}() (API) Differential Revision: https://phab.mercurial-scm.org/D5930

match: delete unused root and cwd arguments to constructors (API) Most matchers no longer need the root and cwd arguments. patternmatcher and includematcher still need the root argument for subincludes. Differential Revision: https://phab.mercurial-scm.org/D5929

dirstate: call and cache os.getcwd() in constructor I'm about to make scmutil.matchfiles() not pass the root and cwd paths to match.exact(), since they no longer have any effect. That turned out to have the surprising effect of making some tests (test-rebase-scenario-global.t and test-removeemptydirs.t) crash when the working directory was removed. The problem was that my patch removed the call to repo.getcwd(), which caused the current working directory to not be cached in the dirstate as early as it was before. This patch fixes that by caching the current working directory in the dirstate constructor. Differential Revision: https://phab.mercurial-scm.org/D5928

cleanup: prefer matchmod.{always,never}() over accessing matchers directly We have these factory methods so we should use them. Differential Revision: https://phab.mercurial-scm.org/D5927

match: allow passing in badfn to always() and never() So that no callers are required to access the matchers themselves. Differential Revision: https://phab.mercurial-scm.org/D5926

py3: use raw strings and %d for formatting Before the string compares on Python 3 failed because we were comparing bytes to str. Using raw strings ensures we are always comparing str. While we're here, also use %d to format integers. Differential Revision: https://phab.mercurial-scm.org/D5925