tracing: extract tracing-active logic to separate function I'm about to add support for counters, and want to avoid duplicating this logic. Differential Revision: https://phab.mercurial-scm.org/D6525

catapipe: add support for COUNTER events Differential Revision: https://phab.mercurial-scm.org/D6524

demandimport: add tracing coverage for Python 3 This makes things feel a little less mysterious when modules are being imported. Differential Revision: https://phab.mercurial-scm.org/D6523

export: don't prefetch *all* files in manifest `hg export` only shows changed files, not all files, but we still prefetched all files in cmdutil.export(). The same is true for the other commands calling cmdutil.exportfile(). That meant that `hg export` with remotefilelog (or lfs, I assume) could take much longer than expected because it would download all the files in the repo. Differential Revision: https://phab.mercurial-scm.org/D6532

remotefilelog: remove obsolete filtering of treemanifest directories I think this has been obsolete since 2cf18f46a1ce (narrow: only walk files within narrowspec also for committed revisions, 2018-09-28). Differential Revision: https://phab.mercurial-scm.org/D6531

py3: add test-dirstate-race2.t to list of passing tests This test was added new recently. The py3 buildbot found that it passes, so let's add it to the list of passing tests. Differential Revision: https://phab.mercurial-scm.org/D6530

strip: during merge allow strip only when -f is used This ensures to abort strip to `hg strip` when we have a merge in progress and allow it only when a `--force` flag is used. Differential Revision: https://phab.mercurial-scm.org/D6529

deltas: set estimated compression upper bound to "3x" instead of "10x" In pratice, we very rarely observer compression better than "3x" on manifest deltas. Having a more aggressive estimate significantly helps our pathological use case on a private repository. Here are a comparison of timings using different upper bound. Estimated compression | ø | ×10 | ×5 | ×3 | timing | 14.11 | 2.61 | 1.96 | 1.53 | We also tested the impact of this series on an array of public repositories. This shown no impact in either size nor timing. Full data set below for those interested. Size ---- Regarding size, not significant impact have been noticed on neither public nor private repositories. Here are the number we gathered on public repositories: zlib/upperbound | no | 10x | 5x | 3x mercurial | 5 875 730 | 5 875 730 | 5 875 730 | 5 875 730 pypy | 27 782 913 | 27 782 913 | 27 782 913 | 27 782 913 netbeans | 159 161 207 | 159 161 207 | 159 161 207 | 159 959 879 (+0.5%) mozilla-central | 323 841 642 | 323 841 642 | 323 841 642 | 319 867 519 (-2.5%) mozilla-try | 746 649 123 | 746 649 123 | 746 649 123 | 741 155 568 (-0.7%) private-repo | 1 485 287 294 | 1 485 287 294 | 1 485 287 294 | 1 409 248 382 (-5.1%) zstd/upperbound | no | 10x | 5x | 3x mercurial | 5 895 206 | 5 895 206 | 5 895 206 | 5 895 206 pypy | 28 689 230 | 28 689 230 | 28 689 230 | 28 689 230 netbeans | 157 636 387 | 157 636 387 | 157 636 387 | 159 692 678 (+1.3%) mozilla-central | 317 650 281 | 317 650 281 | 317 650 281 | 319 613 603 (+0.6%) mozilla-try | 737 555 275 | 737 555 275 | 737 555 275 | 738 079 473 (+0.1%) private-repo | 1 352 362 982 | 1 352 362 982 | 1 346 961 880 | 1 361 327 384 (+0.7%) Speed ------ Timing gathered using `hg perfrevlogwrite -m`. Value are in seconds. mercurial zlib | no | 10x | 5x | 3x | total | 65.551783 | 65.388887 | 65.260658 | 65.321199 | max | 0.034544 | 0.034571 | 0.034659 | 0.034521 | 99.99% | 0.034544 | 0.034571 | 0.034659 | 0.034521 | zstd | no | 10x | 5x | 3x | total | 49.118449 | 49.054062 | 48.753588 | 48.740230 | max | 0.009338 | 0.009239 | 0.009202 | 0.009178 | 99.99% | 0.007618 | 0.007639 | 0.007626 | 0.007621 | pypy zlib | no | 10x | 5x | 3x | total | 560.865984 | 558.983817 | 559.083815 | 559.349152 | max | 0.219614 | 0.215922 | 0.218112 | 0.218107 | 99.99% | 0.219614 | 0.215922 | 0.218112 | 0.218107 | zstd | no | 10x | 5x | 3x | total | 349.393280 | 347.395819 | 347.185407 | 345.643985 | max | 0.084143 | 0.083536 | 0.081834 | 0.082178 | 99.99% | 0.039445 | 0.039639 | 0.039612 | 0.039175 | netbeans zlib | no | 10x | 5x | 3x | total | 33103.327727 | 33314.932260 | 33211.745233 | 33345.891778 | max | 2.666852 | 2.672059 | 2.662453 | 2.662936 | 99.99% | 2.058772 | 2.070429 | 2.069569 | 2.064653 | zstd | no | 10x | 5x | 3x | total | 20112.102708 | 20095.879719 | 20083.390300 | 20123.221859 | max | 2.063482 | 2.062851 | 2.065229 | 2.060147 | 99.99% | 1.146647 | 1.143794 | 1.142933 | 1.146529 | mozilla zlib | no | 10x | 5x | 3x | total | 41374.102138 | 41418.816773 | 41381.956370 | 41334.280732 | max | 3.383474 | 3.387400 | 3.405711 | 3.387316 | 99.99% | 1.006755 | 1.005954 | 1.007700 | 1.007373 | zstd | no | 10x | 5x | 3x | total | 24689.691520 | 24643.939662 | 24664.630027 | 24664.512714 | max | 1.460822 | 1.449640 | 1.439747 | 1.465304 | 99.99% | 0.527111 | 0.527377 | 0.527807 | 0.527226 |

deltas: skip if projected compressed size is bigger than previous snapshot If we have a delta, we check constraints against a lower bound estimate of the resulting compressed delta. We then checks this projected size against the `size(snapshotⁿ) > size(snapshotⁿ⁺¹)` constraint. This allows to exclude potential base candidates before doing any expensive computation. This only apply to the intermediate-snapshot case since this constraint only apply to them. For some pathological cases of a private repository this step provide a further performance boost (timing from `hg perfrevlogwrite`): before: 3.010646 seconds after: 2.609307 seconds

deltas: skip if projected compressed size does not match text size constraint If we have a delta, we check constraints against a lower bound estimate of the resulting compressed delta. We then checks this projected size against the ½ⁿ size constraints. This allows to exclude potential base candidates before doing any expensive computation. This only apply to the intermediate-snapshot case since this constraint only apply to them. For some pathological cases of a private repository this step provide a further performance boost (timing from `hg perfrevlogwrite`): before: 3.145906 seconds after: 3.010646 seconds

deltas: accept and skip None return for delta info They are some extra computation that will shortcut the delta compression if the delta seems hopeless, returning None.

delta: move some delta chain related computation earlier in deltainfo They are some more optimization change that will make use of this in the function. So we retrieve the data earlier.

deltas: skip if projected delta size is bigger than previous snapshot Before computing any delta, we get a basic estimation of the delta size we can expect and the resulted compressed value. We then checks this projected size against the `size(snapshotⁿ) > size(snapshotⁿ⁺¹)` constraint. This allows to exclude potential base candidates before doing any expensive computation. This only apply to the intermediate-snapshot case since this constraint only apply to them. For some pathological cases of a private repository this step provide a significant performance boost (timing from `hg perfrevlogwrite`): before: 14.115908 seconds after: 3.145906 seconds

deltas: skip if projected delta size does not match text size constraint Before computing any delta, we get a basic estimation of the delta size we can expect and the resulted compressed value. We then checks this projected size against the ½ⁿ size constraints. This allows to exclude potential base candidates before doing any expensive computation. This only apply to the intermediate-snapshot case since this constraint only apply to them. In practice we only perform this new checks for the manifestlog. Manifest log combine two property: it is likely to have delta chain issue and its diffing/compression is fairly predictable. The initial author of this changeset is Valentin Gatien-Baron providing the initial idea and initial testing, Pierre-Yves David later consolidated the code in the right location and run more extensive testing.

revlog: add the option to track the expected compression upper bound There are various optimization we can do if we can estimate the size of delta before actually spending CPU compressing them. So we add a attributed dedicated to tracking that. We only use it on Manifest because (1) it structure is quite stable across all Mercurial repository so its compression ratio is fairly universal. This is the revlog with most extreme delta (cf the sparse-revlog optimization). This will be put to use in later changesets. Right now the compression upper bound is set to 10. This is a fairly conservative value (observed value is more around 3), but I prefer to be safe while introducing the optimization principles. We can tune the optimization threshold later.

perf: clarify some of the custom behavior of `perfrevlogwrite` This reduce the chance of developers being surprised by special cases.

perf: fix perfrevlogwrite --count documentation The help text was copy pasted from the previous option.

rust: switched to 'cargo rustc' in setup.py This is more flexible in the passing of additional flags, also what setuptools_rust does, giving less uncertainty about non-Linux platforms.

rust-cpython: fix build for MacOSX MacOSX needs special link flags. Quoting the README of rust-cpython: create a `.cargo/config` with the following content: ``` [target.x86_64-apple-darwin] rustflags = [ "-C", "link-arg=-undefined", "-C", "link-arg=dynamic_lookup", ] ``` This is tested with Python 2.7 (Anaconda install) and Python 3 (Homebrew install)

rust-cpython: management of shared libray suffix Before this changeset, the shared library objects suffixes were both (rustc output and Python input) hardcoded to '.so', which is wrong for Python3 and non Linux targets.

merge: fix race that could cause wrong size in dirstate The problem is that hg merge/update/etc work the following way: 1. figure out what files to update 2. apply the update to disk 3. apply the update to in-memory dirstate 4. write dirstate where step3 looks at the filesystem and assumes it sees the result of step2. If a file is changed between step2 and step3, step3 will record incorrect information in the dirstate. I avoid this by passing the size step3 needs directly from step2, for the common path (not implemented for change/delete conflicts for instance). I didn't fix the same race for the exec bit for now, because it's less likely to be problematic and I had trouble due to the fact that the dirstate stores the permissions differently from the manifest (st_mode vs '' 'l' 'x'), in combination with tests that pretend that symlinks are not supported. However, I moved the lstat from step3 to step2, which should tighten the race window markedly, both for the exec bit and for the mtime. Differential Revision: https://phab.mercurial-scm.org/D6475

worker: support parallelization of functions with return values Currently worker supports running functions that return a progress iterator. Generalize it to handle function that return a progress iterator then a return value. It's unused in this commit, but will be used in the next one. Differential Revision: https://phab.mercurial-scm.org/D6515

tests: show how the dirstate can end up containing wrong information which can result in bad status output. Concretely, this seems to be easily triggered by having a build system watching the filesystem for changes, and rebuilding files that are both tracked and generated while an update is happening. Differential Revision: https://phab.mercurial-scm.org/D6474

rust: new rust options in setup.py The --rust global option turns on usage (and by default compilation) of the rust-cpython based mercurial.rustext. Similarly to what's previously done for zstd, there is a --no-rust option for the build_ext subcommand in order not to build mercurial.rustext, allowing for an OS distribution to prebuild it. The HGWITHRUSTEXT environment variable is still honored, and has the same effect as before, but now it works mostly by making the --rust global option defaulting to True, with some special cases for the direct-ffi case (see more about that below) Coincidentally, the --rust flag can also be passed from the make commands, like actually all global options, in the PURE variable make local PURE=--rust This feels inappropriate, though, and we should follow up with a proper make variable for that case. Although the direct-ffi bindings aren't directly useful any more, we keep them at this stage because - they provide a short prototyping path for experiments in which a C extension module has to call into a Rust extension. The proper way of doing that would be to use capsules, and it's best to wait for our pull request onto rust-cpython for that: https://github.com/dgrunwald/rust-cpython/pull/169 - Build support for capsules defined in Rust will probably need to reuse some of what's currently in use for direct-ffi.

rust: using policy.importrust from Python callers This commit converts all current Python callers of mercurial.rustext to the new policy.importrust system. After this point, going through policy.importrust or policy.importmod (in some more distant future) is mandatory for callers of Rust code outside of Python tests. We felt it to be appropriate to keep Rust-specific tests run inconditionally if the Rust extensions are present.

rust: module policy with importrust We introduce two rust+c module policies and a new `policy.importrust()` that makes use of them. This simple approach provides runtime switching of implementations, which is crucial for the performance measurements such as those Octobus does with ASV. It can also be useful for bug analysis. It also has the advantage of making conditionals in Rust callers more uniform, in particular abstracting over specifics like `demandimport` At this point, the build stays unchanged, with the rust-cpython based `rustext` module being built if HGWITHRUSTEXT=cpython. More transparency for the callers, i.e., just using `policy.importmod` would be a much longer term and riskier effort for the following reasons: 1. It would require to define common module boundaries for the three or four cases (pure, c, rust+ext, cffi) and that is premature with the Rust extension currently under heavy development in areas that are outside the scope of the C extensions. 2. It would imply internal API changes that are not currently wished, as the case of ancestors demonstrates. 3. The lack of data or property-like attributes (tp_member and tp_getset) in current `rust-cpython` makes it impossible to achieve direct transparent replacement of pure Python classes by Rust extension code, meaning that the caller sometimes has to be able to make adjustments or provide additional wrapping.

help: add help entry for internals.mergestate This patch adds an entry for `internals.mergestate` as suggested by @marmoute. Most of the help text is taken from `merge.mergestate`. Differential Revision: https://phab.mercurial-scm.org/D6448 Differential Revision: https://phab.mercurial-scm.org/D6528

phabricator: use parents.set to always set dependencies Now that Mercurial's Phabricator instance has been updated to a version that supports the parents.set transaction on revision.edit we can use that to set dependency relationships in patch stacks instead of abusing the summary. This has the advantage that we can use it on every `phabsend` so commit reordering is picked up without spamming changes like abusing the summary would, and using parents.set will clear previous parents unlike parents.add. Differential Revision: https://phab.mercurial-scm.org/D6514

help: remove repeated word in 'hg help rebase' Specifically, the second 'with' in 'with which to merge with'. Differential Revision: https://phab.mercurial-scm.org/D6483

rebase: tweak description of inmemory working even w/ dirty working dir One of our users was confused because they read this, and then attempted to run `hg rebase` with a dirty working directory, and it still complained. The reason was that they were attempting to rebase the commit they currently had checked out, which (at least with evolve workflows enabled) involves updating the working directory to be based on the newly rebased commit. Differential Revision: https://phab.mercurial-scm.org/D6507

revlog: speed up isancestor Currently, it is implemented on top of commonancestorsheads. Implement it on top of reachableroots instead, as reachableroots could stop walking the graph much sooner than commonancestorsheads. Measuring repo.changelog.isancestorrev on two revisions in a private repository: before: ! wall 0.005175 comb 0.010000 user 0.010000 sys 0.000000 (best of 550) after : ! wall 0.000072 comb 0.000000 user 0.000000 sys 0.000000 (best of 36199) When hg does this kind of operations 1500 times in pull -> bookmarks.comparebookmarks -> bookmarks.validdest, that's 11s that drop from the --profile output. Differential Revision: https://phab.mercurial-scm.org/D6506

dagop: fix documentation of reachableroots The previous revset couldn't be correct as it is symmetric in <roots> and <heads>, but reachableroots has no such symmetry. It makes a difference with for instance reachableroots(2, 3) where 2 and 3 are both children of 1. Differential Revision: https://phab.mercurial-scm.org/D6505

phabricator: add --blocker argument to phabsend to specify blocking reviewers The way to signal to Conduit that a reviewer is considered blocking is just to wrap their PHID in "blocking()" when including it in the list of PHIDs passed to `reviewers.add`. arc doesn't have a --blocker, instead one is supposed to append a '!' to the end of reviewer names (I think reviewers are usually added in an editor rather than the command line, where '!'s can be more hazardous). moz-phab (Mozilla's arcanist wrapper) does have a --blocker argument, and being explicit like this is also more discoverable. Even `arc diff`'s help doesn't seem to mention the reviewer! syntax. Differential Revision: https://phab.mercurial-scm.org/D6512

phabricator: auto-sanitise API tokens and HTTP cookies from VCR recordings Currently when making VCR recordings one needs to manually sanitise sensitive credentials before committing and submitting them as part of tests. It is easy to imagine this being accidentally missed one time by a fallible human and said credentials being leaked. It is also possible that it wouldn't be noticed to alert the user to the leak since the recording files are so large and practically unreviewable. Thus do so automatically, so the only place that needs checking is in the test-phabricator.t file. Differential Revision: https://phab.mercurial-scm.org/D6513

py3: use .startswith() instead of bytes[0] Doing bytes[0] will return the ascii value of that position which breaks comparison with a bytechar. This makes test-absorb.t work again on py3. Differential Revision: https://phab.mercurial-scm.org/D6508

revset: fix merge() to fall back to changectx API if wdir specified I have a code which basically runs "0:wdir() & <user-revset>", and it crashed if merge() were passed in.

revset: use nullrev constant in merge()

mixedrepostorecache: fix a silly redundant updating of set Differential Revision: https://phab.mercurial-scm.org/D6470

rust-regex: fix shortcut for exact matches The current shortcut for rootglobs that can be simplified to exact matches does not work, it instead treats the pattern as a regex, which is not the same thing. This changes fixes the behavior and introduces a test for this behavior. Differential Revision: https://phab.mercurial-scm.org/D6489

rust-filepatterns: use bytes instead of String In my initial patch, I introduced an unnecessary hard constraint on UTF-8 filenames and patterns which I forgot to remove. Although the performance penalty for using String might be negligible, we don't want to break compatibility with non-UTF-8 encodings for no reason. Moreover, this change allows for a cleaner Rust core API. This patch introduces a new utils module that is used with this fix. Finally, PatternError was not put inside the Python module generated by Rust, which would have raised a NameError. Differential Revision: https://phab.mercurial-scm.org/D6485

doc: fix description of "predecessors" to match reality Differential Revision: https://phab.mercurial-scm.org/D6467

phabricator: make `hg debugcallconduit` work outside a hg repo I am trying to write some automations around phabricator and having debugcallconduit work outside a hg repo will be nice! Marking command as optionalrepo instead of norepo because we might to load repo/.hg/hgrc. Differential Revision: https://phab.mercurial-scm.org/D6499

phabricator: pass ui instead of repo to callconduit This will help us make `hg debugcallconduit` work outside a hg repo as next patch will mark that command as no repo. Differential Revision: https://phab.mercurial-scm.org/D6498

phabricator: pass ui into readurltoken instead of passing repo The goal of this series is to make `hg debugcallconduit` work outside of a hg repo. This patch, removes requirement of repo object from readurltoken as we only need ui there. It also updates the callers to pass in ui instead of repo. Differential Revision: https://phab.mercurial-scm.org/D6497

py3: add test-contrib-emacs.t to passing tests list I installed emacs on the server running buildbot and the test started passing on Python 3. Lets add it to the list of passing test. Differential Revision: https://phab.mercurial-scm.org/D6500

phabricator: add commenting to phabsend for new/updated Diffs Especially useful when sending updates to existing Revisions so one can specify the sort of changes e.g. "Address review comments" or "Rebase to tip" If the diff content hasn't changed then it only needs a metadata update which doesn't show in the Phabricator updates UI, so don't add a comment that will. Differential Revision: https://phab.mercurial-scm.org/D6496

py3: fix test-bookmarks-corner-case.t For some reasons, the output of print was not going through. Replaced that ui.status(). Differential Revision: https://phab.mercurial-scm.org/D6481

py3: fix test-fix-metadata.t # skip-blame as just b'' prefixes Differential Revision: https://phab.mercurial-scm.org/D6480

py3: add b'' prefix at one place in run-tests.py #skip-blame because just b'' prefix Differential Revision: https://phab.mercurial-scm.org/D6482

copies: separate added/removed files by newline instead of null This makes it more consistent with how we encode copies (newline-separated lists of null-separated pairs). This perhaps makes {extras} a little less readable (?) despite avoiding the escaping. I don't know how I feel about this patch. I'm okay with it being queued or dropped. Differential Revision: https://phab.mercurial-scm.org/D6486

copies: also encode p[12]copies destination as index into "files" list This is mostly for consistency with the filesaddes/filesremoved fields, but it should also save a bit of space. Differential Revision: https://phab.mercurial-scm.org/D6431

discovery: be more conservative when adjusting the sample size Since 5b34972a0094, the discovery will increase the sample size when it detect a "complex" undecided set. However this detection focussed on the number of roots only, this could regress discovery performance when the undecided set has many roots that eventually get merged into a few heads. To prevent such misbehavior, we adjust the logic to take in account both heads and roots. The sample size will be increased only if both are especially large. Performance testing on the same case as 5b34972a0094, does not show a significant difference.

rust-dirstate: create dirstate submodule This change is here to facilitate a future patch that is written in a different file. I expect this module to grow a few different files. Differential Revision: https://phab.mercurial-scm.org/D6389

profiling: show actual time spent in hotpath display To get, for instance: ... \ 6.6% 4.08s lock.py: __exit__ line 1566: ... | 6.5% 4.01s exchange.py: close line 1191: ... | 6.5% 4.01s transaction.py: _active line 1443: ... | 6.5% 4.01s transaction.py: close line 47: ... | 6.2% 3.84s scmutil.py: wrapped line 529: ... | 6.2% 3.81s localrepo.py: wrapper line 2114: ... | 6.2% 3.81s localrepo.py: updatecaches line 177: ... ... instead of: ... \ 6.6% lock.py: __exit__ line 1566: ... | 6.5% exchange.py: close line 1191: ... | 6.5% transaction.py: _active line 1443: ... | 6.5% transaction.py: close line 47: ... | 6.2% scmutil.py: wrapped line 529: ... | 6.2% localrepo.py: wrapper line 2114: ... | 6.2% localrepo.py: updatecaches line 177: ... ... I find that if it's not displayed, I frequently end up estimating the numbers by hand. Differential Revision: https://phab.mercurial-scm.org/D6477

merge with stable

bookmarks: use correct store for "ambiguity check" I still don't quite know what the check does, but I clearly got it wrong in 526750cdd02d (bookmarks: keep bookmarks in .hg/store if new config set, 2019-05-15). Just compare with the strings we use in @repofilecache and @storecache. These bugs were then copied to the stable branch in c2b83c957621 (localrepo: grab mixedrepostorecache class from 526750cdd02d, 2019-05-20) and 2338bdea4474 (bookmark: also make bookmark cache depends of the changelog, 2019-05-20). As a result, test-wireproto-exchangev2.t is flaky on both branches. This patch fixes that. Differential Revision: https://phab.mercurial-scm.org/D6469

merge with stable

root: add template variables pointing to repository directories These paths are useful for GUI applications to detect changes. A GUI process typically monitors .hg and .hg/store directories so that it will be notified on lock/wlock deletion. Alternatively, maybe we can add debugpaths command if we don't want to extend the root command. I'm not sure which will be nicer.

root: add support for -Tformatter option It's useless right now, but it should just work and I want to add a few more fields.

narrow: pass the bundle to bundle2.widen_bundle() instead of generating there This will make the code in narrowwirepeer.py more better for further refactoring. Differential Revision: https://phab.mercurial-scm.org/D6438