localrepo: support background closing for wwrite() So working copy update can pass it in.

scmutil: support background closing for write() Upcoming patches will add background file closer support to working copy update. This patch adds some plumbing to prepare for that.

chg: hold a lock file before connected to server This is a part of the one server per config series. In multiple-server setup, multiple clients may try to start different servers (on demand) at the same time. The old lock will not guarantee a client to connect to the server it just started, and is not crash friendly. This patch addressed above issues by using flock and does not release the lock until the client actually connects to the server or times out.

serve: allow --daemon-postexec to be 'unlink:path' or 'none' This patch changes the format of value of --daemon-postexec. Now it can be either to unlink a file, or a no-op. The following patch will make chg to use the no-op option.

serve: rename --daemon-pipefds to --daemon-postexec (BC) Initially we use --daemon-pipefds to pass file descriptors for synchronization. Later, in order to support Windows, --daemon-pipefds is changed to accept a file path to unlink instead. The name is outdated since then. chg client is designed to use flock, which will be held before starting a server and until the client actually connects to the server it started. The unlink synchronization approach is not so helpful in this case. To address the issues, this patch renames pipefds to postexec and the following patch will allow the value of --daemon-postexec to be things like 'unlink:/path/to/file' or 'none'.

largefiles: don't explicitly list optional parameters that are not used This makes it easier for changes to the API.

revert: properly revert to ancestor of p2 during merge (issue5052) During merge, added (from one perspective) file can be reported as "modified". To work around that, revert was testing if modified file were present in the parent manifest and marking them as "added" in this case. However, we should be checking against the target revision manifest instead. Otherwise see file as "newly added" even if they exist in the target revision. That revert behavior regressed in 06fbd9518bc5.

help: hg.intevation.de is new primary name of hg.intevation.de (and new cert) Adjust the examples (prefix and hostfingerprints) in help/config.txt https://hg.intevation.de/ is now served with a new certificate that is signed by a commercial CA, so all nearly all browsers will accept it automatically. Listing both names, hg.intevation.de and hg.intevation.org, in the section [hostfingerprints] allows using both without configuring web.cacerts and without changing existing https URLs in the [paths] section.

rebase: explicitly test abort from ambiguous destination We want to explicitly test the next behavior. We add this test in its own changeset to make the test change from the behavior change as clean as possible.

rebase: choose default destination the same way as 'hg merge' (BC) This changeset finally make 'hg rebase' choose its default destination using the same logic as 'hg merge'. The previous default was "tipmost changeset on the current branch", the new default is "the other head if there is only one". This change has multiple consequences: - Multiple tests which were not rebasing anything (rebasing from tipmost head) are now rebasing on the other "lower" branch. This is the expected new behavior. - A test is now explicitly aborting when there is too many heads on the branch. This is the expected behavior. - We gained a better detection of the "nothing to rebase" case while performing 'hg pull --rebase' so the message have been updated. Making clearer than an update was performed and why. This is beneficial side-effect. - Rebasing from an active bookmark will behave the same as 'hg merge' from a bookmark.

rebase: add potential divergent commit hashes to error message (issue5086)

hgwebdir_wsgi: update script and expand help I've updated the script to reflect changes in Mercurial and to include a much more through installation guide with configuration examples and details on how to configure IIS. I've used the script to set up a working server from scratch.

bundlerepo: properly handle hidden linkrev in filelog (issue4945) The bundlerepository have to do some special magic to handle linkrev of the bundlerepo filerev. That logic was done from a repoview and obsolescence marker affecting bundled changeset could lead to a crash. We now ensure we operate on unfiltered repository.

rebase: adds storing collapse message (issue4792) Before this patch collapse message wasn't stored so when you ran into the merge conflict while rebasing, running rebase --continue didn't remember the message and always opened editor to fill commit message. This patch adds saving collapse message in .hg/last-message.txt and restoring it later when needed.

test-automv: fix inline config settings for 5ec1ce8fdf0a

automv: use 95 as the default similarity threshold The motivation for the change from 100 to 95 is included in a comment. * Updated the tests to include a change to a moved file that still should be caught as a move. * Use ui.configint() to non-integer configuration entries more gracefully. Also complain if a similarity outside of the acceptable range is set.

bookmarks: add 'hg push -B .' for pushing the active bookmark (issue4917)

worker: change partition strategy to every Nth element The only consumer of the worker pool code today is `hg update`. Previously, the algorithm to partition work to each worker process preserved input list ordering. We'd take the first N elements, then the next N elements, etc. Measurements on mozilla-central demonstrate this isn't an optimal partitioning strategy. I added debug code to print when workers were exiting. When performing a working copy update on a previously empty working copy of mozilla-central, I noticed that process lifetimes were all over the map. One worker would complete after 7s. Many would complete after 12s. And another worker would often take >16s. This behavior occurred for many worker process counts and was more pronounced on some than others. What I suspect is happening is some workers end up with lots of small files and others with large files. This is because the update code passes in actions according to sorted filenames. And, directories under tend to accumulate similar files. For example, test directories often consist of many small test files and media directories contain binary (often larger) media files. This patch changes the partitioning algorithm to select every Nth element from the input list. Each worker thus has a similar composition of files to operate on. The result of this change is that worker processes now all tend to exit around the same time. The possibility of a long pole due to being unlucky and receiving all the large files has been mitigated. Overall execution time seems to drop, but not by a statistically significant amount on mozilla-central. However, repositories with directories containing many large files will likely show a drop. There shouldn't be any regressions due to partial manifest decoding because the update code already iterates the manifest to determine what files to operate on, so the manifest should already be decoded.

run-tests: allow run-tests.py to run tests outside current directory When reloading tests, run-tests.py was assuming that it could look up the test by the basename, which only works if you are running tests which are in the current directory. This patch changes that lookup to use the full path. This is all that was needed, and does not appear to cause any problems for any of the existing testing work flows based on running the suggested commands at the top of run-tests.py. Motivation: In order to test Mercurial with Hypothesis (according to https://www.mercurial-scm.org/wiki/HypothesisPlan) it is useful to be able to generate temporary test files and execute them. Generating temporary files in the tests/ directory leads to a lot of suboptimal clutter.

histedit: unifying the way replacements are computed for abort and success This is a part of a bigger refactoring effort with the ultimate goal of better understanding of how histedit works and fixing issue4800.

templater: factor out type conversion of revset() result This makes it clear why we have to do repo[int(x)].

templater: evaluate each item of revset() as integer revision Because templater.revset() returns a list of strings, repo["-1"] was mapped to the tipmost revision. Ideally, we should make revset() return a list of integer revisions, but it turned out not simple. If revset() is a list of integers, "{ifcontains(rev, revset(), ...)}" would fail because "ifcontains" casts "rev" to a string. So this patch just converts a string back to an integer revision.

demandimport: blacklist sqlalchemy.events as it has side effects (issue5085) Importing sqlalchemy.events cannot be delayed as it registers classes to their event mechanism. It worked fine before 4f1144c3c72b, since they use new-style imports. But now we have to blacklist it because our demandimport can handle new-style imports. This patch series isn't intended for stable as we don't guarantee API compatibility with 3rd-party extensions. They can temporarily disable the demand importer to work around the issue.

demandimport: enforce ignore list while processing modules in fromlist If a module is loaded as "from . import x" form, there has been no way to disable demand loading for that module because name is ''. This patch makes it possible to prevent demand loading by '<package-name>.x'. We don't use _hgextimport(_origimport) here since attr is known to be a sub-module name. Adding hgext_ to attr wouldn't make sense.

phases: use constants for phase values Magic numbers hinder readability.

test-paths: fix up json output to match $TESTTMP on Windows Without this, the paths were in the form "C:\\Users\\Matt\\AppData...". The test runner wouldn't collapse it down to $TESTTMP, which uses single backslashes.

test-obsolete: conditionalize a test dependent on chmod

progress: display progress bar when HGPLAINEXCEPT contains "progress" This patch changes "progress.shouldprint()" so a feature name is provided to "ui.plain()" to determine if there is an exception specificed in HGPLAINEXCEPT for the progress extension. This will allow user-facing scripts to provide progress output while HGPLAIN is enabled.

run-tests: stop allocating HGPORT3+HGPORT4 The only consumer was test-treemanifest.t, which has been fixed. In general, you should be able to use killdaemons.py to recycle ports instead of going over 3 ports (HGPORT, HGPORT1, HGPORT2). In the future, if you want to add a port, be sure to change portneeded in _getport.

run-tests: refactor port allocation into functions Adding a port reservation was too hard and someone did it wrong. By refactoring, such reservations can be managed more safely. This also adds documentation so that the next person who tries is more likely to update all the places correctly. Note that in this commit the reservation and consumers do not match, that will be fixed in the next commit.

tests: put test-treemanifest.t on a port diet test-treemanifest.t had introduced HGPORT3 and HGPORT4, which were improperly added to run-tests.py. It also was not using HGPORT1. This recycles HGPORT, and shifts everything into HGPORT1 + HGPORT2.

chg: pass sensitive command line flags to server We are going to make chgserver load repo config, remember what it is, and load repo config again to detect config change. This is the first step that passes config, repo, cwd options to server. Traceback is passed as well to cover errors before hitting chgserver.runcommand.

chg: use mallocx and reallocx in hgclient This patch simplifies the code a bit, and reduces the binary size a little.

chg: add utility functions mallocx, reallocx They are like malloc and realloc but will abort the program on error. A lot of places use {m,re}alloc and check their results. This patch can simplify them.

localrepo: move new repo requirements into standalone function (API) This patch extracts the code for determining requirements for a new repo into a standalone function. By doing so, future code that will perform an in-place repository upgrade (e.g. to generaldelta) can examine the set of proposed new requirements and possibly take additional actions (such as adding dotencode or fncache) when performing the upgrade. This patch is marked as API because _baserequirements (which was added in b090601a80d1 so extensions could override it) has been removed and will presumably impact whatever extension it was added for. Consumers should be able to monkeypatch the new function to achieve the same functionality. The "create" argument has been dropped because the function is only called in one location and "create" is always true in that case. While it makes logical sense for this code to be a method so extensions can implement a custom repo class / method to override it, this won't actually work. This is because requirements determination occurs during localrepository.__init__ and this is before the "reposetup" "callback" is fired. So, the only way for extensions to customize requirements would be to overwrite localrepo.localrepository or to monkeypatch a function on a module during extsetup(). Since we try to keep localrepository small, we use a standalone function. There is probably room to offer extensions a "hook" point to alter repository creation. But that is scope bloat.

localrepo: isolate requirements determination from side effects In preparation for moving requirements determination to its own function.

localrepo: use local variable for requirements assignment A future patch will refactor requirements determination into a standalone function. To prepare for this, refactor the requirements code to assign to a local variable instead of to self.requirements.

destutil: ensure we offer 'hg update' hint when not at head in all cases In the merge case, we abort if the working copy is not at head, offering to run 'hg update' in the hint instead. In the rebase case, we do not abort in that case. Yet if no rebase destination are found, it still make sense to hint the user about running 'hg update'. So we re-introduce a conditional using this branch in the 'onheadcheck == False' case. This will get used on rebase use this function.

chg: forward umask from client to server This is necessary to make chg test pass on test-inherit-mode.t.

chgserver: add setumask method Before this patch, the server won't inherit umask from the client, which will fail test-inherit-mode.t. This patch provides a way for the client to change umask of the server, similar to chdir and setenv.

chgserver: use _readlist and _readstr Use _readlist and _readstr to make the code shorter.

commandserver: use _readlist Use _readlist introduced in previous commit to make the code shorter.

commandserver: add _readstr and _readlist Reading a string or a list are common operations for commandserver and chgserver. This patch adds _readstr and _readlist to avoid duplication.

extensions: add notloaded method to return extensions failed to load Before this patch, there is no easy way to detect if there are extensions failed to load. While this is okay for most situations, chgserver is designed to preload all extensions specified in config and does need the information. This patch adds extensions.notloaded() to return names of extensions failed to load.

histedit: renaming parts to which _histedit was split I recently broke _histedit into multiple functions, each of which had 'action' in its name. This is a little bit confusing since 'action' is the word for an individual histedit plan item (such as edit or pick). To avoid this confusion, these functions are now renamed to contain 'histedit' as part of their names.

histedit: break _histedit into smaller pieces (add _finishaction) This is a part of a bigger effort to refactor histedit with ultimate goal of understanding it.

automv: switch to specifying the similarity as an integer (0-100) This is consistent with the addremove --similarity option.

automv: do not release lock between marking files and the actual commit

automv: reuse existing scutil._markchanges() function

automv: improve function docstrings

automv: remove test for 'developer mode' The tests no longer use this mode, the test is entirely redundant.

automv: add some context for the tests

automv: simplify retrieving the status The default is to show the status in the current working copy, no need to pass in the parent and working copy context here.

tests: change branches test to work cross platform While it is not easy to make a file 000 on Windows, you can emulate most of the behaviors by replacing the file with a directory.

histedit: change string literals to constants in goal naming This is a part of bigger effort to refactor histedit with ultimate goal of understanding it.

run-tests: add --chg option to install and run tests using chg Because the temporary installation directory is shared between hg and chg, --chg is not allowed if --with-hg option is specified. Also, --chg option does not work on FreeBSD because "make" command is hard-coded. These limitations can be improved later. Almost all tests will fail with chg right now.

run-tests: add --with-chg option to run tests using chg Unlike --with-hg=/path/to/chg, this option allows us to start and clean up command servers in isolated environment. And we can specify the hg command as well as the chg command.

destutil: add more precise error classes for destmerge Having exception classes more precise than 'Abort' will allow us to properly catch "nothing to rebase" situations when we will be using 'destmerge' in rebase.

destutil: allow to disable the "on head check" in destmerge 'hg merge' refuses to pick a default destination if the working copy is not on a head. This is a very sensible default for 'hg merge' but 'hg rebase' should work in this situation. So we introduce a way to disable this check. It will soon be used by rebase.

destutil: allow to specify an explicit source for the merge We can now specify from where the merge is performed. The experimental revset is updated to take revisions as argument, allowing to test the feature. This will become very useful for pick the 'rebase' default destination. For this reason, we also exclude all descendants from the rebased set from the candidate destinations. This descendants exclusion was not necessary for merge as default destination would not be picked from anything else than a head. I'm not super excited with the current error messages, but I would prefer to delay an overall messages rework once 'hg rebase' is done getting a default destination aligned with 'hg merge'.