unionrepo: fill in uncompressed length of revlog entry It can be either -1 or a valid length, but shouldn't be None. IIUC, we can simply trust the length retrieved from the revlog to be overlaid. I don't bother thinking whether the compressed length can be copied as well. We'll need to fix it later.

fuzz: add clean target Differential Revision: https://phab.mercurial-scm.org/D3677

fuzzutil: make it possible to use absl when C++17 isn't supported Differential Revision: https://phab.mercurial-scm.org/D3676

fuzz: extract some common utilities and use modern C++ idioms Alex Gaynor suggested we should probably copy the left and right sides of diffs to new blocks so we can detect over-reads in the diffing code, and I agree. Once I got into that, I realized we should do things with C++17 idioms rather than keep using malloc() and free(). This change is the result. I tried to split it more than this and failed. Everything still compiles and works in the oss-fuzz container, so I think we can count on C++17 being available! Differential Revision: https://phab.mercurial-scm.org/D3675

tests: update fuzzer tests to include both fuzzers Differential Revision: https://phab.mercurial-scm.org/D3674

transaction-summary: show phase changes statistics in pull/unbundle Upon pull or unbundle, we display a message with the number of changesets which phase became public. Noticeably, this new message would appear even if no new changeset were added (below the "no changes found" message), thus indicating that something actually happened to the local repository.

outgoing: pay attention to `default:pushurl` for bookmarks and subrepos The problem here was that `default:pushurl` and `default` get translated to a single entry in `ui.paths` named 'default', with an attribute for 'pushloc', 'loc', and 'rawloc'. ui.expandpath() then always takes the `rawloc` attribute. Maybe the ui.expandpath() API is busted and should be removed? Or maybe getpath() should return a copy that adds an attribute reflecting the URL of the path chosen? I thought that I could remove the code in hg._outgoing() and pass the location resolved in commands.py as `dest`, but unfortunately that code is needed there to resolve #branch type URLs. Maybe that should be pulled up to commands.py, because I can't see any reasonable behavior for a subrepo path that's constructed out of that type of URL. The push command already resolves this early, so that works properly. But it looks like bundle, histedit, largefiles, patchbomb, and summary use a similar pattern, so they are likely similarly affected.

revlog: make chainbase cache its result for the correct revision Previously, as 'rev' was our iterator, we were always caching the chain base for the second revision of the chain, or for the base itself.

revlog: make getcandidaterevs more consistent about updating tested revs set Like in previous cases, update the set of tested revisions after yielding

templatekw: make getrenamed() return only filename, not nodeid No callers cared about the nodeid and I want to make getrenamed() not look up the node (although it's currently free, I hope to store copy info in changesets and not include the nodeid). Differential Revision: https://phab.mercurial-scm.org/D3666

py3: wrap tempfile.NamedTemporaryFile() to return bytes fp.name Unlike its name, tempfile.NamedTemporaryFile is not a class, so I renamed the pycompat version to look like a plain function. Since temp.name uses in the infinitepush extension aren't bytes-safe, this patch leaves them unmodified. Another weird thing is tempfile.mktemp(), which does not accept bytes suffix nor prefix. Sigh.

py3: wrap tempfile.mkdtemp() to use bytes path This also flips the default to use a bytes path on Python 3.

py3: wrap tempfile.mkstemp() to use bytes path This patch just flips the default to use a bytes path on Python 3. ca1cf9b3cce7 is backed out as the bundlepath should be bytes now.

extensions: remove strip_init=True from _disabledpaths() It's no longer used.

extensions: peek command table of disabled extensions without importing With chg where demandimport disabled, and if disk cache not warm, it took more than 5 seconds to get "unknown command" error when you typo a command name. This is horrible UX. The new implementation is less accurate than the original one as Python can do anything at import time and cmdtable may be imported from another module, but I think it's good enough. Note that the new implementation has to parse .py files, which is slightly slower than executing .pyc if demandimport is enabled.

lfs: clarify pointer validation error messages It wasn't obvious that LFS was involved from the error messages when `hg verify` fails.

terse: pconvert() entries added to the temporary terse dict for Windows Recent additional testing revealed this problem on Windows: --- tests/test-status.t.err +++ tests/test-status.t.err @@ -109,7 +109,7 @@ tweaking defaults works $ hg status --cwd a --config ui.tweakdefaults=yes - ? . + ? ../a/ ? ../b/ ? ../in_root $ HGPLAIN=1 hg status --cwd a --config ui.tweakdefaults=yes @@ -120,7 +120,7 @@ ? b/in_b (glob) ? in_root $ HGPLAINEXCEPT=tweakdefaults hg status --cwd a --config ui.tweakdefaults=yes - ? . + ? ..\a\ ? ../b/ ? ../in_root (glob) AFAICT, the status list (input and output here) is always in '/' format. The '\' printed output on Windows is because each file is run through repo.pathto() -> dirstate.pathto() -> util.pathto(). (And that function states that the argument uses '/' separators.) I fixed a similar issue in 362096cfdb1f, and given the apparent need for these strings to be in '/' format, I wonder if cmdutil.dirnode() should be rewritten to avoid os.path.join(). But it looks like all entries added to the temporary terse dict should use '/' now, and cmdutil.tersedir() looks like the only user.

filemerge: don't pass function name as loadpath's module_name param

phases: define an official tuple of phases we do not share Same motivation as for `mutablephases`, having a single definition helps with updating phases logic.

phases: define an official tuple of mutable phases Such tuple was already manually defined in a couple of place. Having an official definition makes it easy to introduce of new phases.

repoview: use 'phasecache.getrevset' when computing 'unserved' filter This reuses a precomputed set, being much faster than manual iteration. Computing the "unserved" filter speed up by 55%. before: wall 0.014671 comb 0.020000 user 0.020000 sys 0.000000 (best of 180) after: wall 0.006623 comb 0.010000 user 0.010000 sys 0.000000 (best of 401) The "unserved" filter is used to restrict the revisions client can pull from a server. (eg: secret changesets)

graft: drop --user and --date values info from hint in case of conflicts After previous patch, we have started preserving user and date values in graftstate and reusing them during `hg graft --continue`. Now passing --user and --date again with --continue makes no sense. Let's drop them from the hint. Differential Revision: https://phab.mercurial-scm.org/D3660

graft: reuse --user and --date values in `hg graft --continue` (BC) Reading the user and date information from graftstate during `hg graft --continue` will help us in preserving the user and date arguments passed when `hg graft` was called. This patch reads that information and reuses that while running `hg graft --continue`. So after this patch, --user and --date values are preserved even if conflicts occur and user don't need to pass them again. The test changes demonstrate the fix. This is a backward incompatible change but I think of this more as a bug fix. Also thinking about removing the line from `hg help graft` which says --continue does not reapply other flags but need to check what are the other flags which needs to be preserved. Differential Revision: https://phab.mercurial-scm.org/D3659

tests: add test showing --continue not preserving --date and --user flags This patch adds test showing that we don't preserve the user passed --date and --user values in `hg graft`. I was fixing that and realized this is untested. Adding tests before so that behavior change or the fix is easy to realize. Differential Revision: https://phab.mercurial-scm.org/D3658

graft: store user passed date and user information in graftstate Right now, `hg help graft` says: The -c/--continue option does not reapply earlier options, except for --force. which should be treated as a bug. A good user experience is that the commands remember the arguments passed initially and preserve them during `hg graft --continue`. This patch starts storing the user and date information in graftstate if user passed it. Upcoming patches will make sure we preserve that information during --continue and them don't allow user to pass any new arguments with --continue. I don't think there is any another `--continue` flag which allows new options to be passed with it. Differential Revision: https://phab.mercurial-scm.org/D3657

graft: use cmdstate.delete() to delete the state file Previous patches start using state.cmdstate() class for statefiles. The class has a function delete() to delete the state file. This patch replaces the existing repo.vfs.unlink() with that delete() function. Differential Revision: https://phab.mercurial-scm.org/D3656

graph: add outputgraph() function, called by ascii() to print the graph to the ui. This allows a cleaner entrypoint for extensions to tweak the graph output without needing to rewrite all of ascii(), or needing to manually guess where the graph nodes/edges end and the rev note portion begins. This patch does not affect graph output or behavior in any way. Differential Revision: https://phab.mercurial-scm.org/D3655

graft: add test for reading old graftstate files with new mechanism This tests the reading of old graftstate file using the new logic. The tests shows that if user is in middle of a graft and then updates their mercurial to the version where we have new graftstate format, we can still read the old graft state format files correctly. Differential Revision: https://phab.mercurial-scm.org/D2597

graft: start using the cmdstate class to read and write data to graftstate This patch replaces the logic to read and write data to graftstate file to use the state.cmdstate() class. The previous graftstate format didn't had any version number on top of that, so we have to catch the CorruptedState error and then read the graftstate in case of old state files. This will help us to implement nice additions to graft commands like `--no-commit`, `--abort`, `--stop` flags. Passing on test-graft.t shows that things are working fine. Differential Revision: https://phab.mercurial-scm.org/D3654

graft: use state.cmdstate() to check whether graftstate exists This is a step towards make graft use the new state.cmdstate() class. This patch replaces the ugly try-except with nice if-else conditionals. Differential Revision: https://phab.mercurial-scm.org/D3652

graft: factor out function to read graft state in separate function Fatcoring out the logic in a separate function will help us in adding conditional logic for different versions of graft state files. Differential Revision: https://phab.mercurial-scm.org/D3651

state: removing remaining instances of opts class variable The cmdstate class used to have a class variable opts which used to be a dict which stored all the data for the state. Recent cleanups removed the use of that variable. There were couple of instances left which are removed by this patch. Differential Revision: https://phab.mercurial-scm.org/D3653