rhg: demonstrate that rhg breaks on non-generaldelta revlogs Differential Revision: https://phab.mercurial-scm.org/D11880

tests: add a short `sleep` in test-status.t With dirstate-v2 and rhg both enabled, this test would sometimes fail for me with: ``` --- tests/test-status.t +++ tests/test-status.t#dirstate-v2.err @@ -943,7 +943,7 @@ $ rm subdir/unknown $ hg status $ hg debugdirstate --all --no-dates | grep '^ ' - 0 -1 set subdir + 0 -1 unset subdir ``` Meaning that `status` did not write a directory mtime in the dirstate as expected. This can happen if the observed mtime of the directory is the same as "current time" at the start of `status`. This current time is obtained by creating a temporary file and checking its mtime. Even with ext4 on my system being able to store nanosecond precision, identical mtime for successive but separate operations is still possible becuse the kernel may cache the current time: https://stackoverflow.com/a/14393315/1162888 0.1 second should be enough for this cache to be updated, without significantly slowing down the test. Differential Revision: https://phab.mercurial-scm.org/D11900

rhg: Add support for `rhg status --copies` Copy sources are collected during `status()` rather than after the fact like in Python, because `status()` takes a `&mut` exclusive reference to the dirstate map (in order to potentially mutate it for directory mtimes) and returns `Cow<'_, HgPath>` that borrow the dirstate map. Even though with `Cow` only some shared borrows remain, the still extend the same lifetime of the initial `&mut` so the dirstate map cannot be borrowed again to access copy sources after the fact: https://doc.rust-lang.org/nomicon/lifetime-mismatch.html#limits-of-lifetimes Additionally, collecting copy sources during the dirstate tree traversal that `status()` already does avoids the cost of another traversal or other lookups (though I haven’t benchmarked that cost). Differential Revision: https://phab.mercurial-scm.org/D11899

rhg: refactor relativize_path into a struct + method … instead of a function that takes an iterator and a callback. Differential Revision: https://phab.mercurial-scm.org/D11898

rhg: refactor display_status_paths with a struct for common arguments Differential Revision: https://phab.mercurial-scm.org/D11897

rhg: Add support for ui.ignore and ui.ignore.* config This fixes some but not all failures in `tests/test-hgignore.t` when running with `rhg status` enabled. Differential Revision: https://phab.mercurial-scm.org/D11907

doc: remove a spurious ^L in some doc This was wrongly introduced in D11784. Differential Revision: https://phab.mercurial-scm.org/D11896

upgrade: drop some dead code Everything done by this block is now done by earlier code. So we don't need it anymore. Differential Revision: https://phab.mercurial-scm.org/D11872

upgrade: only process revlogs that needs it by default We have more and more requirement that does not affect revlog or that only affect some of them. It is silly to force a full processing of all revlog to juste move the requirement around, or to simply rewrite the dirstate. So now, only the revlog that needs to be touched will be touched. Unless the --changelog & al flags are used. Differential Revision: https://phab.mercurial-scm.org/D11871

upgrade: issue a message when a revlog type has to be upgraded This is more explicite and prepare for a smoother transition to smarter picking of the revlog we will process. Differential Revision: https://phab.mercurial-scm.org/D11870

upgrade: explicitly warn when a `--no-xxx` flag is overwritten Some format upgrade/downgrades -needs- revlog to be recomputed. So we now detect that individually and warn when it contradict explicitly passed flag. This is part of a larger series to make `debugupgraderepo` smarter about which revlog it picks by default. Differential Revision: https://phab.mercurial-scm.org/D11869

upgrade: make the list of explicitly specified revlog a dict This makes various logic simpler and will help making future patch clearer. Differential Revision: https://phab.mercurial-scm.org/D11868

upgrade: move the revlog selection code lower down the chain We about about to make revlog section smarter. Moving the code around will make the next changesets clearer. Differential Revision: https://phab.mercurial-scm.org/D11867

rhg: Set second_ambiguous as needed in post-status fixup This fixes an intermittent bug that manifested only in test-revert.t, and unfortunately not on CI. On a fast enough machine we could have: 1. A file is modified 2. `rhg status` writes an updated dirstate-v1 3. The same file is modified again … all within the same integer second. Because the dirstate-v1 file format does not store sub-second precision, step 2 must write the file’s mtime as "unknown" because of the possibility of step 3. However, most of the code now handles timestamps with nanosecond precision in order to take advantage of it in dirstate-v2. `second_ambiguous` must be set for timestamps that become ambiguous if sub-second precision is dropped (such as through serialization in dirstate-v1 format). Differential Revision: https://phab.mercurial-scm.org/D11889

dirstate: Document Timestamp.second_ambiguous Differential Revision: https://phab.mercurial-scm.org/D11888

hghave: fix the check for suid on platforms lacking support The mac tests were raising an AttributeError without the default arg. Differential Revision: https://phab.mercurial-scm.org/D11906

upgrade: byteify a few error messages These were flagged by pytype (which is currently disabled on this file due to another failure). Differential Revision: https://phab.mercurial-scm.org/D11905

rhg: support the new extension suboptions syntax See inline comments Differential Revision: https://phab.mercurial-scm.org/D11874

branching: merge stable into default

dirstate-v2: fix upgrade on an empty repository This used to crash as the dirstate file does not exist in this case. Differential Revision: https://phab.mercurial-scm.org/D11866

dirstate-v2: test upgrade without rust too There is no reason to gate this anymore. Differential Revision: https://phab.mercurial-scm.org/D11865

upgrade: don't use `dd status=none` in the test This breaks on Windows, so lets use `>2 /dev/null` like in the other tests. Differential Revision: https://phab.mercurial-scm.org/D11873

test-upgrade: narrow the `debugformat` call when upgrading to dirstate-v2 This will make the test less noisy when new requirement are added. Differential Revision: https://phab.mercurial-scm.org/D11864

filemerge: remove `premerge` argument from `_makebackup()` We now always pass `True`, so there's no need to pass it. Differential Revision: https://phab.mercurial-scm.org/D11863

filemerge: inline `_filemerge()` into `filemerge()` The caller is now trivial, so the indirection is pointless. Differential Revision: https://phab.mercurial-scm.org/D11860

filemerge: make `_filemerge()` do both premerge and merge This patch removes the `premerge` argument from `_filemerge()` and makes it do both the "premerge" and "merge" steps without the caller having to call it twice. Differential Revision: https://phab.mercurial-scm.org/D11859

filemerge: merge `premerge()` into `filemerge()` Differential Revision: https://phab.mercurial-scm.org/D11858

mergestate: inline `_resolve()` into `resolve()` The caller is now trivial, so the indirection is pointless. Differential Revision: https://phab.mercurial-scm.org/D11857

mergestate: make `_resolve()` do both preresolve and resolve This patch removes the `preresolve` argument from `_resolve()` and makes it do both the "preresolve" and "resolve" steps without the caller having to call it twice. Differential Revision: https://phab.mercurial-scm.org/D11856

mergestate: merge `preresolve()` into `resolve()` The separation between `preresolve()` and `resolve()` was something added for the "merge driver" feature. Since we removed that in 32ce4cbaec4b (mergedriver: delete it, 2020-09-17), we don't need the separation anymore. More cleanups will follow. Differential Revision: https://phab.mercurial-scm.org/D11855

tests: remove unnecessary explicit args from `failfilemerge.py` The `failfilemerge()` function always raises an exception without looking at its arguments, so let's use `*args` and `**kwargs`. Differential Revision: https://phab.mercurial-scm.org/D11854

simplemerge: set `conflicts` earlier for :union tool Differential Revision: https://phab.mercurial-scm.org/D11853