Mon, 07 Dec 2020 23:15:35 -0500 run-tests: fix a typo in an attribute name
Matt Harbison <matt_harbison@yahoo.com> [Mon, 07 Dec 2020 23:15:35 -0500] rev 46066
run-tests: fix a typo in an attribute name At least, I assume it's a typo. Nothing else uses it, but `_tmpbindir` is used. Differential Revision: https://phab.mercurial-scm.org/D9542
Mon, 07 Dec 2020 20:12:36 +0900 test-extension: flush diagnostic message to stabilize chg output
Yuya Nishihara <yuya@tcha.org> [Mon, 07 Dec 2020 20:12:36 +0900] rev 46065
test-extension: flush diagnostic message to stabilize chg output Since chg server may create new file object for the attached stdout, procutil.stdout is not ui.fout and the buffered procutil.stdout data wouldn't be flushed at all. That's why test-extension.t passes without modification on Python 2.
Thu, 03 Dec 2020 01:45:23 -0500 formatting: re-blacken match.py
Matt Harbison <matt_harbison@yahoo.com> [Thu, 03 Dec 2020 01:45:23 -0500] rev 46064
formatting: re-blacken match.py Differential Revision: https://phab.mercurial-scm.org/D9512
Mon, 07 Dec 2020 11:23:34 +0100 transaction: windows workaround for missing line iteration support
Joerg Sonnenberger <joerg@bec.de> [Mon, 07 Dec 2020 11:23:34 +0100] rev 46063
transaction: windows workaround for missing line iteration support The mixedfilemodewrapper doesn't support line iteration, so just read the whole file in one go. Differential Revision: https://phab.mercurial-scm.org/D9532
Sat, 28 Nov 2020 15:04:44 +0100 sidedata: send the correct revision data for wireproto v2
Joerg Sonnenberger <joerg@bec.de> [Sat, 28 Nov 2020 15:04:44 +0100] rev 46062
sidedata: send the correct revision data for wireproto v2 When no sidedata is present, rawdata() and revision() are the same. But as soon as sidedata is present, the way it is currently stored will change the rawdata and that is not desired here, so switch to the correct data accessor. Differential Revision: https://phab.mercurial-scm.org/D9445
Sun, 06 Dec 2020 14:45:04 +0100 debugdiscovery: move various computation earlier
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 06 Dec 2020 14:45:04 +0100] rev 46061
debugdiscovery: move various computation earlier We are about to add more data to debug discovery (eg: data bout the initial undecided set, number of roundtrip, etc). So we start by cleaning up the code by spliting some computation and some display related preparation. Differential Revision: https://phab.mercurial-scm.org/D9524
Sun, 06 Dec 2020 06:23:26 +0100 debugdiscovery: clarify internal key name in debugobsolete
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 06 Dec 2020 06:23:26 +0100] rev 46060
debugdiscovery: clarify internal key name in debugobsolete They were probably clear when they got added initially but with more key around, they gain to be clearer. Differential Revision: https://phab.mercurial-scm.org/D9528
Fri, 20 Nov 2020 14:17:08 +0100 copies-rust: extract the processing of a ChangedFiles in its own function
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Nov 2020 14:17:08 +0100] rev 46059
copies-rust: extract the processing of a ChangedFiles in its own function This is a reasonably independent piece of code that we can extract in its own function. This extraction will be very useful for the next changeset, where we will change the iteration order (but still do the same kind of processing). Differential Revision: https://phab.mercurial-scm.org/D9421
Fri, 20 Nov 2020 14:03:40 +0100 copies-rust: move the parent token to an enum
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Nov 2020 14:03:40 +0100] rev 46058
copies-rust: move the parent token to an enum We carry around information about which parent of a revision is been dealt with. So far this was a `usize` but as we are about to pass it around to more function it seems like a good idea to start cleaning this up and use a proper enum. Differential Revision: https://phab.mercurial-scm.org/D9420
Thu, 12 Nov 2020 15:54:10 +0100 copies-rust: parse the changed-file sidedata directly in rust
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 12 Nov 2020 15:54:10 +0100] rev 46057
copies-rust: parse the changed-file sidedata directly in rust It does not make much sense to parse the data into python object using slow python code to later turn them into rust object. We directly pass the binary blob and use it directly in Rust. Ideally we could directly read the sidedata in Rust, using a revlog in Rust. However we do not have this ready to use yet. This more direct approach provides a nice speedup over the board. Especially five cases that we previously too slow to return in the previous changeset are not able to finish. Notably, we are now significantly faster than the Python version of this code in all the meaningful cases. I looked at the various cases that remains significantly slower then the filelog version and they are currently 3 main source of slowness: * The isancestor computation: even if we cache them, if the revs spawn over a large amount of history the ancestry checking is still quite expensive. Using a different approach more centered on the graph we are currently considering might yield significant speed. * Merging of the map from the two parents: in some case, this climb up to ⅔ of the time spent in copy tracing. See inline comment for idea to handle this better. * Extracting data from the filelog. I would like to think this mostly comes from the fact my test repositories pre-date Valentin Gatien-Baron improvement of the `files` field (99ebde4fec99) and that more recent revisions will be faster to fetch. Further testing on this aspect is needed. This revision compared to the previous one: =========================================== Repo Case Source-Rev Dest-Rev # of revisions old time new time Difference Factor time per rev -------------------------------------------------------------------------------------------------------------------------------------------------------------- mercurial x_revs_x_added_0_copies ad6b123de1c7 39cfcef4f463 : 1 revs, 0.000047 s, 0.000049 s, +0.000002 s, × 1.0426, 49 µs/rev mercurial x_revs_x_added_x_copies 2b1c78674230 0c1d10351869 : 6 revs, 0.000181 s, 0.000114 s, -0.000067 s, × 0.6298, 19 µs/rev mercurial x000_revs_x000_added_x_copies 81f8ff2a9bf2 dd3267698d84 : 1032 revs, 0.005852 s, 0.004223 s, -0.001629 s, × 0.7216, 4 µs/rev pypy x_revs_x_added_0_copies aed021ee8ae8 099ed31b181b : 9 revs, 0.000229 s, 0.000305 s, +0.000076 s, × 1.3319, 33 µs/rev pypy x_revs_x000_added_0_copies 4aa4e1f8e19a 359343b9ac0e : 1 revs, 0.000058 s, 0.000060 s, +0.000002 s, × 1.0345, 60 µs/rev pypy x_revs_x_added_x_copies ac52eb7bbbb0 72e022663155 : 7 revs, 0.000146 s, 0.000173 s, +0.000027 s, × 1.1849, 24 µs/rev pypy x_revs_x00_added_x_copies c3b14617fbd7 ace7255d9a26 : 1 revs, 0.001206 s, 0.000446 s, -0.000760 s, × 0.3698, 446 µs/rev pypy x_revs_x000_added_x000_copies df6f7a526b60 a83dc6a2d56f : 6 revs, 0.025275 s, 0.010360 s, -0.014915 s, × 0.4099, 1726 µs/rev pypy x000_revs_xx00_added_0_copies 89a76aede314 2f22446ff07e : 4785 revs, 0.080303 s, 0.048002 s, -0.032301 s, × 0.5978, 10 µs/rev pypy x000_revs_x000_added_x_copies 8a3b5bfd266e 2c68e87c3efe : 6780 revs, 0.152641 s, 0.075705 s, -0.076936 s, × 0.4960, 11 µs/rev pypy x000_revs_x000_added_x000_copies 89a76aede314 7b3dda341c84 : 5441 revs, 0.099107 s, 0.056705 s, -0.042402 s, × 0.5722, 10 µs/rev pypy x0000_revs_x_added_0_copies d1defd0dc478 c9cb1334cc78 : 43646 revs, 2.137894 s, 0.794685 s, -1.343209 s, × 0.3717, 18 µs/rev pypy x0000_revs_xx000_added_0_copies bf2c629d0071 4ffed77c095c : 26389 revs, 0.022202 s, 0.020209 s, -0.001993 s, × 0.9102, 0 µs/rev pypy x0000_revs_xx000_added_x000_copies 08ea3258278e d9fa043f30c0 : 11316 revs, 0.228946 s, 0.122475 s, -0.106471 s, × 0.5350, 10 µs/rev netbeans x_revs_x_added_0_copies fb0955ffcbcd a01e9239f9e7 : 2 revs, 0.000186 s, 0.000142 s, -0.000044 s, × 0.7634, 71 µs/rev netbeans x_revs_x000_added_0_copies 6f360122949f 20eb231cc7d0 : 2 revs, 0.000133 s, 0.000113 s, -0.000020 s, × 0.8496, 56 µs/rev netbeans x_revs_x_added_x_copies 1ada3faf6fb6 5a39d12eecf4 : 3 revs, 0.000320 s, 0.000241 s, -0.000079 s, × 0.7531, 80 µs/rev netbeans x_revs_x00_added_x_copies 35be93ba1e2c 9eec5e90c05f : 9 revs, 0.001339 s, 0.000729 s, -0.000610 s, × 0.5444, 81 µs/rev netbeans x000_revs_xx00_added_0_copies eac3045b4fdd 51d4ae7f1290 : 1421 revs, 0.015694 s, 0.010198 s, -0.005496 s, × 0.6498, 7 µs/rev netbeans x000_revs_x000_added_x_copies e2063d266acd 6081d72689dc : 1533 revs, 0.018457 s, 0.015312 s, -0.003145 s, × 0.8296, 9 µs/rev netbeans x000_revs_x000_added_x000_copies ff453e9fee32 411350406ec2 : 5750 revs, 0.111691 s, 0.060517 s, -0.051174 s, × 0.5418, 10 µs/rev netbeans x0000_revs_xx000_added_x000_copies 588c2d1ced70 1aad62e59ddd : 67005 revs, 1.166017 s, 0.611102 s, -0.554915 s, × 0.5241, 9 µs/rev mozilla-central x_revs_x_added_0_copies 3697f962bb7b 7015fcdd43a2 : 2 revs, 0.000197 s, 0.000164 s, -0.000033 s, × 0.8325, 82 µs/rev mozilla-central x_revs_x000_added_0_copies dd390860c6c9 40d0c5bed75d : 8 revs, 0.000626 s, 0.000334 s, -0.000292 s, × 0.5335, 41 µs/rev mozilla-central x_revs_x_added_x_copies 8d198483ae3b 14207ffc2b2f : 9 revs, 0.000303 s, 0.000463 s, +0.000160 s, × 1.5281, 51 µs/rev mozilla-central x_revs_x00_added_x_copies 98cbc58cc6bc 446a150332c3 : 7 revs, 0.001679 s, 0.000730 s, -0.000949 s, × 0.4348, 104 µs/rev mozilla-central x_revs_x000_added_x000_copies 3c684b4b8f68 0a5e72d1b479 : 3 revs, 0.006947 s, 0.003522 s, -0.003425 s, × 0.5070, 1174 µs/rev mozilla-central x_revs_x0000_added_x0000_copies effb563bb7e5 c07a39dc4e80 : 6 revs, 0.133070 s, 0.072518 s, -0.060552 s, × 0.5450, 12086 µs/rev mozilla-central x000_revs_xx00_added_0_copies 6100d773079a 04a55431795e : 1593 revs, 0.008705 s, 0.005760 s, -0.002945 s, × 0.6617, 3 µs/rev mozilla-central x000_revs_x000_added_x_copies 9f17a6fc04f9 2d37b966abed : 8315 revs, 0.005913 s, 0.005720 s, -0.000193 s, × 0.9674, 0 µs/rev mozilla-central x000_revs_x000_added_x000_copies 7c97034feb78 4407bd0c6330 : 7839 revs, 0.101373 s, 0.063310 s, -0.038063 s, × 0.6245, 8 µs/rev mozilla-central x0000_revs_xx000_added_0_copies 9eec5917337d 67118cc6dcad : 45299 revs, 0.046526 s, 0.043608 s, -0.002918 s, × 0.9373, 0 µs/rev mozilla-central x0000_revs_xx000_added_x000_copies f78c615a656c 96a38b690156 : 30263 revs, 0.313954 s, 0.204831 s, -0.109123 s, × 0.6524, 6 µs/rev mozilla-central x00000_revs_x0000_added_x0000_copies 6832ae71433c 4c222a1d9a00 : 153721 revs, 3.367395 s, 2.161906 s, -1.205489 s, × 0.6420, 14 µs/rev mozilla-central x00000_revs_x00000_added_x000_copies 76caed42cf7c 1daa622bbe42 : 210546 revs, 4.691820 s, 3.291831 s, -1.399989 s, × 0.7016, 15 µs/rev mozilla-try x_revs_x_added_0_copies aaf6dde0deb8 9790f499805a : 2 revs, 0.001199 s, 0.001213 s, +0.000014 s, × 1.0117, 606 µs/rev mozilla-try x_revs_x000_added_0_copies d8d0222927b4 5bb8ce8c7450 : 2 revs, 0.001216 s, 0.001225 s, +0.000009 s, × 1.0074, 612 µs/rev mozilla-try x_revs_x_added_x_copies 092fcca11bdb 936255a0384a : 4 revs, 0.000613 s, 0.000564 s, -0.000049 s, × 0.9201, 141 µs/rev mozilla-try x_revs_x00_added_x_copies b53d2fadbdb5 017afae788ec : 2 revs, 0.001906 s, 0.001549 s, -0.000357 s, × 0.8127, 774 µs/rev mozilla-try x_revs_x000_added_x000_copies 20408ad61ce5 6f0ee96e21ad : 1 revs, 0.092766 s, 0.035918 s, -0.056848 s, × 0.3872, 35918 µs/rev mozilla-try x_revs_x0000_added_x0000_copies effb563bb7e5 c07a39dc4e80 : 6 revs, 0.136074 s, 0.073788 s, -0.062286 s, × 0.5423, 12298 µs/rev mozilla-try x000_revs_xx00_added_0_copies 6100d773079a 04a55431795e : 1593 revs, 0.009067 s, 0.006151 s, -0.002916 s, × 0.6784, 3 µs/rev mozilla-try x000_revs_x000_added_x_copies 9f17a6fc04f9 2d37b966abed : 8315 revs, 0.006243 s, 0.006165 s, -0.000078 s, × 0.9875, 0 µs/rev mozilla-try x000_revs_x000_added_x000_copies 1346fd0130e4 4c65cbdabc1f : 6657 revs, 0.114463 s, 0.065421 s, -0.049042 s, × 0.5715, 9 µs/rev mozilla-try x0000_revs_x_added_0_copies 63519bfd42ee a36a2a865d92 : 40314 revs, 0.433683 s, 0.313749 s, -0.119934 s, × 0.7235, 7 µs/rev mozilla-try x0000_revs_x_added_x_copies 9fe69ff0762d bcabf2a78927 : 38690 revs, 0.411278 s, 0.297867 s, -0.113411 s, × 0.7242, 7 µs/rev mozilla-try x0000_revs_xx000_added_x_copies 156f6e2674f2 4d0f2c178e66 : 54487 revs, 0.155133 s, 0.111300 s, -0.043833 s, × 0.7174, 2 µs/rev mozilla-try x0000_revs_xx000_added_0_copies 9eec5917337d 67118cc6dcad : 45299 revs, 0.048933 s, 0.046202 s, -0.002731 s, × 0.9442, 1 µs/rev mozilla-try x0000_revs_xx000_added_x000_copies 89294cd501d9 7ccb2fc7ccb5 : 97052 revs, 8.100385 s, 1.999640 s, -6.100745 s, × 0.2469, 20 µs/rev mozilla-try x0000_revs_x0000_added_x0000_copies e928c65095ed e951f4ad123a : 52031 revs, 1.446720 s, 0.809134 s, -0.637586 s, × 0.5593, 15 µs/rev mozilla-try x00000_revs_x_added_0_copies 6a320851d377 1ebb79acd503 : 363753 revs, killed , 47.406785 s, , , 130 µs/rev mozilla-try x00000_revs_x00000_added_0_copies dc8a3ca7010e d16fde900c9c : 444327 revs, 1.369537 s, 0.996219 s, -0.373318 s, × 0.7274, 2 µs/rev mozilla-try x00000_revs_x_added_x_copies 5173c4b6f97c 95d83ee7242d : 362229 revs, killed , 47.273399 s, , , 130 µs/rev mozilla-try x00000_revs_x000_added_x_copies 9126823d0e9c ca82787bb23c : 359344 revs, killed , 47.419099 s, , , 131 µs/rev mozilla-try x00000_revs_x0000_added_x0000_copies 8d3fafa80d4b eb884023b810 : 192665 revs, 5.186079 s, 3.512653 s, -1.673426 s, × 0.6773, 18 µs/rev mozilla-try x00000_revs_x00000_added_x0000_copies 1b661134e2ca 1ae03d022d6d : 237259 revs, killed , 44.459049 s, , , 187 µs/rev mozilla-try x00000_revs_x00000_added_x000_copies 9b2a99adc05e 8e29777b48e6 : 391148 revs, killed , 52.837926 s, , , 135 µs/rev This revision compared to the python code: ========================================== Repo Case Source-Rev Dest-Rev # of revisions Python-Time Rust-Time Difference Factor time per rev -------------------------------------------------------------------------------------------------------------------------------------------------------------- mercurial x_revs_x_added_0_copies ad6b123de1c7 39cfcef4f463 : 1 revs, 0.000044 s, 0.000049 s, +0.000005 s, × 1.1136, 49 µs/rev mercurial x_revs_x_added_x_copies 2b1c78674230 0c1d10351869 : 6 revs, 0.000138 s, 0.000114 s, -0.000024 s, × 0.8261, 19 µs/rev mercurial x000_revs_x000_added_x_copies 81f8ff2a9bf2 dd3267698d84 : 1032 revs, 0.005052 s, 0.004223 s, -0.000829 s, × 0.8359, 4 µs/rev pypy x_revs_x_added_0_copies aed021ee8ae8 099ed31b181b : 9 revs, 0.000219 s, 0.000305 s, +0.000086 s, × 1.3927, 33 µs/rev pypy x_revs_x000_added_0_copies 4aa4e1f8e19a 359343b9ac0e : 1 revs, 0.000055 s, 0.000060 s, +0.000005 s, × 1.0909, 60 µs/rev pypy x_revs_x_added_x_copies ac52eb7bbbb0 72e022663155 : 7 revs, 0.000128 s, 0.000173 s, +0.000045 s, × 1.3516, 24 µs/rev pypy x_revs_x00_added_x_copies c3b14617fbd7 ace7255d9a26 : 1 revs, 0.001089 s, 0.000446 s, -0.000643 s, × 0.4096, 446 µs/rev pypy x_revs_x000_added_x000_copies df6f7a526b60 a83dc6a2d56f : 6 revs, 0.017407 s, 0.010360 s, -0.007047 s, × 0.5952, 1726 µs/rev pypy x000_revs_xx00_added_0_copies 89a76aede314 2f22446ff07e : 4785 revs, 0.094175 s, 0.048002 s, -0.046173 s, × 0.5097, 10 µs/rev pypy x000_revs_x000_added_x_copies 8a3b5bfd266e 2c68e87c3efe : 6780 revs, 0.238009 s, 0.075705 s, -0.162304 s, × 0.3181, 11 µs/rev pypy x000_revs_x000_added_x000_copies 89a76aede314 7b3dda341c84 : 5441 revs, 0.125876 s, 0.056705 s, -0.069171 s, × 0.4505, 10 µs/rev pypy x0000_revs_x_added_0_copies d1defd0dc478 c9cb1334cc78 : 43646 revs, 3.581556 s, 0.794685 s, -2.786871 s, × 0.2219, 18 µs/rev pypy x0000_revs_xx000_added_0_copies bf2c629d0071 4ffed77c095c : 26389 revs, 0.016721 s, 0.020209 s, +0.003488 s, × 1.2086, 0 µs/rev pypy x0000_revs_xx000_added_x000_copies 08ea3258278e d9fa043f30c0 : 11316 revs, 0.242367 s, 0.122475 s, -0.119892 s, × 0.5053, 10 µs/rev netbeans x_revs_x_added_0_copies fb0955ffcbcd a01e9239f9e7 : 2 revs, 0.000165 s, 0.000142 s, -0.000023 s, × 0.8606, 71 µs/rev netbeans x_revs_x000_added_0_copies 6f360122949f 20eb231cc7d0 : 2 revs, 0.000114 s, 0.000113 s, -0.000001 s, × 0.9912, 56 µs/rev netbeans x_revs_x_added_x_copies 1ada3faf6fb6 5a39d12eecf4 : 3 revs, 0.000296 s, 0.000241 s, -0.000055 s, × 0.8142, 80 µs/rev netbeans x_revs_x00_added_x_copies 35be93ba1e2c 9eec5e90c05f : 9 revs, 0.001124 s, 0.000729 s, -0.000395 s, × 0.6486, 81 µs/rev netbeans x000_revs_xx00_added_0_copies eac3045b4fdd 51d4ae7f1290 : 1421 revs, 0.013060 s, 0.010198 s, -0.002862 s, × 0.7809, 7 µs/rev netbeans x000_revs_x000_added_x_copies e2063d266acd 6081d72689dc : 1533 revs, 0.017112 s, 0.015312 s, -0.001800 s, × 0.8948, 9 µs/rev netbeans x000_revs_x000_added_x000_copies ff453e9fee32 411350406ec2 : 5750 revs, 0.660350 s, 0.060517 s, -0.599833 s, × 0.0916, 10 µs/rev netbeans x0000_revs_xx000_added_x000_copies 588c2d1ced70 1aad62e59ddd : 67005 revs, 10.032499 s, 0.611102 s, -9.421397 s, × 0.0609, 9 µs/rev mozilla-central x_revs_x_added_0_copies 3697f962bb7b 7015fcdd43a2 : 2 revs, 0.000189 s, 0.000164 s, -0.000025 s, × 0.8677, 82 µs/rev mozilla-central x_revs_x000_added_0_copies dd390860c6c9 40d0c5bed75d : 8 revs, 0.000462 s, 0.000334 s, -0.000128 s, × 0.7229, 41 µs/rev mozilla-central x_revs_x_added_x_copies 8d198483ae3b 14207ffc2b2f : 9 revs, 0.000270 s, 0.000463 s, +0.000193 s, × 1.7148, 51 µs/rev mozilla-central x_revs_x00_added_x_copies 98cbc58cc6bc 446a150332c3 : 7 revs, 0.001474 s, 0.000730 s, -0.000744 s, × 0.4953, 104 µs/rev mozilla-central x_revs_x000_added_x000_copies 3c684b4b8f68 0a5e72d1b479 : 3 revs, 0.004806 s, 0.003522 s, -0.001284 s, × 0.7328, 1174 µs/rev mozilla-central x_revs_x0000_added_x0000_copies effb563bb7e5 c07a39dc4e80 : 6 revs, 0.085150 s, 0.072518 s, -0.012632 s, × 0.8517, 12086 µs/rev mozilla-central x000_revs_xx00_added_0_copies 6100d773079a 04a55431795e : 1593 revs, 0.007064 s, 0.005760 s, -0.001304 s, × 0.8154, 3 µs/rev mozilla-central x000_revs_x000_added_x_copies 9f17a6fc04f9 2d37b966abed : 8315 revs, 0.004741 s, 0.005720 s, +0.000979 s, × 1.2065, 0 µs/rev mozilla-central x000_revs_x000_added_x000_copies 7c97034feb78 4407bd0c6330 : 7839 revs, 0.190133 s, 0.063310 s, -0.126823 s, × 0.3330, 8 µs/rev mozilla-central x0000_revs_xx000_added_0_copies 9eec5917337d 67118cc6dcad : 45299 revs, 0.035651 s, 0.043608 s, +0.007957 s, × 1.2232, 0 µs/rev mozilla-central x0000_revs_xx000_added_x000_copies f78c615a656c 96a38b690156 : 30263 revs, 0.440694 s, 0.204831 s, -0.235863 s, × 0.4648, 6 µs/rev mozilla-central x00000_revs_x0000_added_x0000_copies 6832ae71433c 4c222a1d9a00 : 153721 revs, 18.454163 s, 2.161906 s, -16.292257 s, × 0.1172, 14 µs/rev mozilla-central x00000_revs_x00000_added_x000_copies 76caed42cf7c 1daa622bbe42 : 210546 revs, 31.562719 s, 3.291831 s, -28.270888 s, × 0.1043, 15 µs/rev mozilla-try x_revs_x_added_0_copies aaf6dde0deb8 9790f499805a : 2 revs, 0.001189 s, 0.001213 s, +0.000024 s, × 1.0202, 606 µs/rev mozilla-try x_revs_x000_added_0_copies d8d0222927b4 5bb8ce8c7450 : 2 revs, 0.001204 s, 0.001225 s, +0.000021 s, × 1.0174, 612 µs/rev mozilla-try x_revs_x_added_x_copies 092fcca11bdb 936255a0384a : 4 revs, 0.000586 s, 0.000564 s, -0.000022 s, × 0.9625, 141 µs/rev mozilla-try x_revs_x00_added_x_copies b53d2fadbdb5 017afae788ec : 2 revs, 0.001845 s, 0.001549 s, -0.000296 s, × 0.8396, 774 µs/rev mozilla-try x_revs_x000_added_x000_copies 20408ad61ce5 6f0ee96e21ad : 1 revs, 0.063822 s, 0.035918 s, -0.027904 s, × 0.5628, 35918 µs/rev mozilla-try x_revs_x0000_added_x0000_copies effb563bb7e5 c07a39dc4e80 : 6 revs, 0.088038 s, 0.073788 s, -0.014250 s, × 0.8381, 12298 µs/rev mozilla-try x000_revs_xx00_added_0_copies 6100d773079a 04a55431795e : 1593 revs, 0.007389 s, 0.006151 s, -0.001238 s, × 0.8325, 3 µs/rev mozilla-try x000_revs_x000_added_x_copies 9f17a6fc04f9 2d37b966abed : 8315 revs, 0.004868 s, 0.006165 s, +0.001297 s, × 1.2664, 0 µs/rev mozilla-try x000_revs_x000_added_x000_copies 1346fd0130e4 4c65cbdabc1f : 6657 revs, 0.222450 s, 0.065421 s, -0.157029 s, × 0.2941, 9 µs/rev mozilla-try x0000_revs_x_added_0_copies 63519bfd42ee a36a2a865d92 : 40314 revs, 0.370675 s, 0.313749 s, -0.056926 s, × 0.8464, 7 µs/rev mozilla-try x0000_revs_x_added_x_copies 9fe69ff0762d bcabf2a78927 : 38690 revs, 0.358020 s, 0.297867 s, -0.060153 s, × 0.8320, 7 µs/rev mozilla-try x0000_revs_xx000_added_x_copies 156f6e2674f2 4d0f2c178e66 : 54487 revs, 0.145235 s, 0.111300 s, -0.033935 s, × 0.7663, 2 µs/rev mozilla-try x0000_revs_xx000_added_0_copies 9eec5917337d 67118cc6dcad : 45299 revs, 0.037606 s, 0.046202 s, +0.008596 s, × 1.2286, 1 µs/rev mozilla-try x0000_revs_xx000_added_x000_copies 89294cd501d9 7ccb2fc7ccb5 : 97052 revs, 7.382439 s, 1.999640 s, -5.382799 s, × 0.2709, 20 µs/rev mozilla-try x0000_revs_x0000_added_x0000_copies e928c65095ed e951f4ad123a : 52031 revs, 7.273506 s, 0.809134 s, -6.464372 s, × 0.1112, 15 µs/rev mozilla-try x00000_revs_x_added_0_copies 6a320851d377 1ebb79acd503 : 363753 revs, killed , 47.406785 s, , , 130 µs/rev mozilla-try x00000_revs_x00000_added_0_copies dc8a3ca7010e d16fde900c9c : 444327 revs, 1.074593 s, 0.996219 s, -0.078374 s, × 0.9271, 2 µs/rev mozilla-try x00000_revs_x_added_x_copies 5173c4b6f97c 95d83ee7242d : 362229 revs, killed , 47.273399 s, , , 130 µs/rev mozilla-try x00000_revs_x000_added_x_copies 9126823d0e9c ca82787bb23c : 359344 revs, killed , 47.419099 s, , , 131 µs/rev mozilla-try x00000_revs_x0000_added_x0000_copies 8d3fafa80d4b eb884023b810 : 192665 revs, 27.746195 s, 3.512653 s, -24.233542 s, × 0.1266, 18 µs/rev mozilla-try x00000_revs_x00000_added_x0000_copies 1b661134e2ca 1ae03d022d6d : 237259 revs, killed , 44.459049 s, , , 187 µs/rev mozilla-try x00000_revs_x00000_added_x000_copies 9b2a99adc05e 8e29777b48e6 : 391148 revs, killed , 52.837926 s, , , 135 µs/rev This revision compared to the filelog algorithm: ================================================ Repo Case Source-Rev Dest-Rev # of revisions filelog sidedata Difference Factor time per rev -------------------------------------------------------------------------------------------------------------------------------------------------------------- mercurial x_revs_x_added_0_copies ad6b123de1c7 39cfcef4f463 : 1 revs, 0.000906 s, 0.000049 s, -0.000857 s, × 0.0540, 48 µs/rev mercurial x_revs_x_added_x_copies 2b1c78674230 0c1d10351869 : 6 revs, 0.001844 s, 0.000114 s, -0.001730 s, × 0.0618, 18 µs/rev mercurial x000_revs_x000_added_x_copies 81f8ff2a9bf2 dd3267698d84 : 1032 revs, 0.018577 s, 0.004223 s, -0.014354 s, × 0.2273, 4 µs/rev pypy x_revs_x_added_0_copies aed021ee8ae8 099ed31b181b : 9 revs, 0.005009 s, 0.000305 s, -0.004704 s, × 0.0608, 33 µs/rev pypy x_revs_x000_added_0_copies 4aa4e1f8e19a 359343b9ac0e : 1 revs, 0.209606 s, 0.000060 s, -0.209546 s, × 0.0002, 59 µs/rev pypy x_revs_x_added_x_copies ac52eb7bbbb0 72e022663155 : 7 revs, 0.017008 s, 0.000173 s, -0.016835 s, × 0.0101, 24 µs/rev pypy x_revs_x00_added_x_copies c3b14617fbd7 ace7255d9a26 : 1 revs, 0.019227 s, 0.000446 s, -0.018781 s, × 0.0231, 445 µs/rev pypy x_revs_x000_added_x000_copies df6f7a526b60 a83dc6a2d56f : 6 revs, 0.765782 s, 0.010360 s, -0.755422 s, × 0.0135, 1726 µs/rev pypy x000_revs_xx00_added_0_copies 89a76aede314 2f22446ff07e : 4785 revs, 1.186068 s, 0.048002 s, -1.138066 s, × 0.0404, 10 µs/rev pypy x000_revs_x000_added_x_copies 8a3b5bfd266e 2c68e87c3efe : 6780 revs, 1.266745 s, 0.075705 s, -1.191040 s, × 0.0597, 11 µs/rev pypy x000_revs_x000_added_x000_copies 89a76aede314 7b3dda341c84 : 5441 revs, 1.666389 s, 0.056705 s, -1.609684 s, × 0.0340, 10 µs/rev pypy x0000_revs_x_added_0_copies d1defd0dc478 c9cb1334cc78 : 43646 revs, 0.001070 s, 0.794685 s, +0.793615 s, × 742.69, 18 µs/rev pypy x0000_revs_xx000_added_0_copies bf2c629d0071 4ffed77c095c : 26389 revs, 1.076269 s, 0.020209 s, -1.056060 s, × 0.0187, 0 µs/rev pypy x0000_revs_xx000_added_x000_copies 08ea3258278e d9fa043f30c0 : 11316 revs, 1.355085 s, 0.122475 s, -1.232610 s, × 0.0903, 10 µs/rev netbeans x_revs_x_added_0_copies fb0955ffcbcd a01e9239f9e7 : 2 revs, 0.028551 s, 0.000142 s, -0.028409 s, × 0.0049, 70 µs/rev netbeans x_revs_x000_added_0_copies 6f360122949f 20eb231cc7d0 : 2 revs, 0.157319 s, 0.000113 s, -0.157206 s, × 0.0007, 56 µs/rev netbeans x_revs_x_added_x_copies 1ada3faf6fb6 5a39d12eecf4 : 3 revs, 0.025722 s, 0.000241 s, -0.025481 s, × 0.0093, 80 µs/rev netbeans x_revs_x00_added_x_copies 35be93ba1e2c 9eec5e90c05f : 9 revs, 0.053374 s, 0.000729 s, -0.052645 s, × 0.0136, 80 µs/rev netbeans x000_revs_xx00_added_0_copies eac3045b4fdd 51d4ae7f1290 : 1421 revs, 0.038146 s, 0.010198 s, -0.027948 s, × 0.2673, 7 µs/rev netbeans x000_revs_x000_added_x_copies e2063d266acd 6081d72689dc : 1533 revs, 0.229215 s, 0.015312 s, -0.213903 s, × 0.0668, 9 µs/rev netbeans x000_revs_x000_added_x000_copies ff453e9fee32 411350406ec2 : 5750 revs, 0.974484 s, 0.060517 s, -0.913967 s, × 0.0621, 10 µs/rev netbeans x0000_revs_xx000_added_x000_copies 588c2d1ced70 1aad62e59ddd : 67005 revs, 3.924308 s, 0.611102 s, -3.313206 s, × 0.1557, 9 µs/rev mozilla-central x_revs_x_added_0_copies 3697f962bb7b 7015fcdd43a2 : 2 revs, 0.035563 s, 0.000164 s, -0.035399 s, × 0.0046, 81 µs/rev mozilla-central x_revs_x000_added_0_copies dd390860c6c9 40d0c5bed75d : 8 revs, 0.145766 s, 0.000334 s, -0.145432 s, × 0.0022, 41 µs/rev mozilla-central x_revs_x_added_x_copies 8d198483ae3b 14207ffc2b2f : 9 revs, 0.026283 s, 0.000463 s, -0.025820 s, × 0.0176, 51 µs/rev mozilla-central x_revs_x00_added_x_copies 98cbc58cc6bc 446a150332c3 : 7 revs, 0.087403 s, 0.000730 s, -0.086673 s, × 0.0083, 104 µs/rev mozilla-central x_revs_x000_added_x000_copies 3c684b4b8f68 0a5e72d1b479 : 3 revs, 0.209484 s, 0.003522 s, -0.205962 s, × 0.0168, 1173 µs/rev mozilla-central x_revs_x0000_added_x0000_copies effb563bb7e5 c07a39dc4e80 : 6 revs, 2.197867 s, 0.072518 s, -2.125349 s, × 0.0329, 12084 µs/rev mozilla-central x000_revs_xx00_added_0_copies 6100d773079a 04a55431795e : 1593 revs, 0.090142 s, 0.005760 s, -0.084382 s, × 0.0638, 3 µs/rev mozilla-central x000_revs_x000_added_x_copies 9f17a6fc04f9 2d37b966abed : 8315 revs, 0.742658 s, 0.005720 s, -0.736938 s, × 0.0077, 0 µs/rev mozilla-central x000_revs_x000_added_x000_copies 7c97034feb78 4407bd0c6330 : 7839 revs, 1.166159 s, 0.063310 s, -1.102849 s, × 0.0542, 8 µs/rev mozilla-central x0000_revs_xx000_added_0_copies 9eec5917337d 67118cc6dcad : 45299 revs, 6.721719 s, 0.043608 s, -6.678111 s, × 0.0064, 0 µs/rev mozilla-central x0000_revs_xx000_added_x000_copies f78c615a656c 96a38b690156 : 30263 revs, 3.356523 s, 0.204831 s, -3.151692 s, × 0.0610, 6 µs/rev mozilla-central x00000_revs_x0000_added_x0000_copies 6832ae71433c 4c222a1d9a00 : 153721 revs, 15.880822 s, 2.161906 s, -13.718916 s, × 0.1361, 14 µs/rev mozilla-central x00000_revs_x00000_added_x000_copies 76caed42cf7c 1daa622bbe42 : 210546 revs, 20.781275 s, 3.291831 s, -17.489444 s, × 0.1584, 15 µs/rev mozilla-try x_revs_x_added_0_copies aaf6dde0deb8 9790f499805a : 2 revs, 0.084165 s, 0.001213 s, -0.082952 s, × 0.0144, 606 µs/rev mozilla-try x_revs_x000_added_0_copies d8d0222927b4 5bb8ce8c7450 : 2 revs, 0.503744 s, 0.001225 s, -0.502519 s, × 0.0024, 612 µs/rev mozilla-try x_revs_x_added_x_copies 092fcca11bdb 936255a0384a : 4 revs, 0.021545 s, 0.000564 s, -0.020981 s, × 0.0261, 140 µs/rev mozilla-try x_revs_x00_added_x_copies b53d2fadbdb5 017afae788ec : 2 revs, 0.240699 s, 0.001549 s, -0.239150 s, × 0.0064, 774 µs/rev mozilla-try x_revs_x000_added_x000_copies 20408ad61ce5 6f0ee96e21ad : 1 revs, 1.100682 s, 0.035918 s, -1.064764 s, × 0.0326, 35882 µs/rev mozilla-try x_revs_x0000_added_x0000_copies effb563bb7e5 c07a39dc4e80 : 6 revs, 2.234809 s, 0.073788 s, -2.161021 s, × 0.0330, 12295 µs/rev mozilla-try x000_revs_xx00_added_0_copies 6100d773079a 04a55431795e : 1593 revs, 0.091222 s, 0.006151 s, -0.085071 s, × 0.0674, 3 µs/rev mozilla-try x000_revs_x000_added_x_copies 9f17a6fc04f9 2d37b966abed : 8315 revs, 0.764722 s, 0.006165 s, -0.758557 s, × 0.0080, 0 µs/rev mozilla-try x000_revs_x000_added_x000_copies 1346fd0130e4 4c65cbdabc1f : 6657 revs, 1.185655 s, 0.065421 s, -1.120234 s, × 0.0551, 9 µs/rev mozilla-try x0000_revs_x_added_0_copies 63519bfd42ee a36a2a865d92 : 40314 revs, 0.089736 s, 0.313749 s, +0.224013 s, × 3.4963, 7 µs/rev mozilla-try x0000_revs_x_added_x_copies 9fe69ff0762d bcabf2a78927 : 38690 revs, 0.084132 s, 0.297867 s, +0.213735 s, × 3.5404, 7 µs/rev mozilla-try x0000_revs_xx000_added_x_copies 156f6e2674f2 4d0f2c178e66 : 54487 revs, 7.581932 s, 0.111300 s, -7.470632 s, × 0.0146, 2 µs/rev mozilla-try x0000_revs_xx000_added_0_copies 9eec5917337d 67118cc6dcad : 45299 revs, 6.671144 s, 0.046202 s, -6.624942 s, × 0.0069, 1 µs/rev mozilla-try x0000_revs_xx000_added_x000_copies 89294cd501d9 7ccb2fc7ccb5 : 97052 revs, 7.674771 s, 1.999640 s, -5.675131 s, × 0.2605, 20 µs/rev mozilla-try x0000_revs_x0000_added_x0000_copies e928c65095ed e951f4ad123a : 52031 revs, 9.870343 s, 0.809134 s, -9.061209 s, × 0.0819, 15 µs/rev mozilla-try x00000_revs_x_added_0_copies 6a320851d377 1ebb79acd503 : 363753 revs, 0.094781 s, 47.406785 s, +47.312004 s, × 500.17, 130 µs/rev mozilla-try x00000_revs_x00000_added_0_copies dc8a3ca7010e d16fde900c9c : 444327 revs, 26.690029 s, 0.996219 s, -25.693810 s, × 0.0373, 2 µs/rev mozilla-try x00000_revs_x_added_x_copies 5173c4b6f97c 95d83ee7242d : 362229 revs, 0.094941 s, 47.273399 s, +47.178458 s, × 497.92, 130 µs/rev mozilla-try x00000_revs_x000_added_x_copies 9126823d0e9c ca82787bb23c : 359344 revs, 0.233811 s, 47.419099 s, +47.185288 s, × 202.80, 131 µs/rev mozilla-try x00000_revs_x0000_added_x0000_copies 8d3fafa80d4b eb884023b810 : 192665 revs, 19.321750 s, 3.512653 s, -15.809097 s, × 0.1817, 18 µs/rev mozilla-try x00000_revs_x00000_added_x0000_copies 1b661134e2ca 1ae03d022d6d : 237259 revs, 21.358350 s, 44.459049 s, +23.100699 s, × 2.0815, 187 µs/rev mozilla-try x00000_revs_x00000_added_x000_copies 9b2a99adc05e 8e29777b48e6 : 391148 revs, 25.328737 s, 52.837926 s, +27.509189 s, × 2.0860, 135 µs/rev Differential Revision: https://phab.mercurial-scm.org/D9307
Tue, 01 Dec 2020 22:37:34 +0100 upgrade: start moving the "to be happening" data in a dedicated object
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 01 Dec 2020 22:37:34 +0100] rev 46056
upgrade: start moving the "to be happening" data in a dedicated object The upgrade code has a lot of logic to determine which action needs to be performed depending of various element (sometimes depending from each other). It would be nice to have a consistent object representing this. That could be cleanly passed and avoid some logic duplication. So we create this object as a start. Differential Revision: https://phab.mercurial-scm.org/D9487
Sun, 06 Dec 2020 20:38:01 -0500 hg: add user-site to `sys.path` on Windows to allow pip-installed extensions
Matt Harbison <matt_harbison@yahoo.com> [Sun, 06 Dec 2020 20:38:01 -0500] rev 46055
hg: add user-site to `sys.path` on Windows to allow pip-installed extensions This has been in the TortoiseHg builds for several cycles now on Windows, and even longer on macOS. It allows an extension to be configured with `ext =` syntax, instead of requiring the full path to be specified. It's confusing for a user to be hit with messages about not being able to load extensions, based solely on which `hg.exe` is being run. This only applies to py2exe binaries, since wrapper.exe already sees into the user site area. There are no frozen binaries on other platforms (that I'm aware of), and an equivalent change will need to be made to `dispatch.py` in order to work with PyOxidizer, since it bypasses this module completely. (It also has the ability to use the `site` module, so it will look completely different.) Differential Revision: https://phab.mercurial-scm.org/D9531
Mon, 30 Nov 2020 17:13:07 +0100 rust: use crossbeam-channel crate directly
Simon Sapin <simon-commits@exyr.org> [Mon, 30 Nov 2020 17:13:07 +0100] rev 46054
rust: use crossbeam-channel crate directly … instead of its reexport in the crossbeam crate. This removes two crates from the dependency graph. Differential Revision: https://phab.mercurial-scm.org/D9521
Fri, 04 Dec 2020 12:42:23 +0100 wireprotov2: re-add tuple around `bundle2` check
Raphaël Gomès <rgomes@octobus.net> [Fri, 04 Dec 2020 12:42:23 +0100] rev 46053
wireprotov2: re-add tuple around `bundle2` check I stumbled upon this while looking for the current (v1) `capable` method. It looks like 9c2c77c73f23 accidentally removed the comma, turning the tuple into a simple parenthesis expression. This has not been detected since wireproto2 is not in use AFAIK. Differential Revision: https://phab.mercurial-scm.org/D9518
Tue, 01 Dec 2020 20:35:19 +0100 upgrade: gather code about requirement checking together
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 01 Dec 2020 20:35:19 +0100] rev 46052
upgrade: gather code about requirement checking together They just moved in the same file, now they are grouped together and documented. Differential Revision: https://phab.mercurial-scm.org/D9486
Tue, 01 Dec 2020 20:24:38 +0100 upgrade: extract the checking of target requirements change
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 01 Dec 2020 20:24:38 +0100] rev 46051
upgrade: extract the checking of target requirements change This logic is fairly independant, lets move it out of the main function. Differential Revision: https://phab.mercurial-scm.org/D9485
Tue, 01 Dec 2020 15:50:12 +0100 upgrade: drop an outdated comment
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 01 Dec 2020 15:50:12 +0100] rev 46050
upgrade: drop an outdated comment We can control the added/removed requirement through config for multiple years. Differential Revision: https://phab.mercurial-scm.org/D9484
Tue, 01 Dec 2020 15:54:38 +0100 upgrade: gather code about source checking together
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 01 Dec 2020 15:54:38 +0100] rev 46049
upgrade: gather code about source checking together They just moved in the same file, now they are grouped together and documented. Differential Revision: https://phab.mercurial-scm.org/D9483
Tue, 01 Dec 2020 15:45:23 +0100 upgrade: move requirements checking in a dedicated function
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 01 Dec 2020 15:45:23 +0100] rev 46048
upgrade: move requirements checking in a dedicated function This is a simple an isolated check that can go next to the associated code. Differential Revision: https://phab.mercurial-scm.org/D9482
Tue, 01 Dec 2020 15:11:06 +0100 upgrade: split definition and management of the actions from the main code
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 01 Dec 2020 15:11:06 +0100] rev 46047
upgrade: split definition and management of the actions from the main code This is a second step to clarify and clean up this code. The code responsible for definition which action exist, are possible and their compatibility if moved into a sub module. This clarify the main code and prepare further cleanup. Differential Revision: https://phab.mercurial-scm.org/D9477
Tue, 01 Dec 2020 09:13:08 +0100 upgrade: split actual upgrade code away from the main module
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 01 Dec 2020 09:13:08 +0100] rev 46046
upgrade: split actual upgrade code away from the main module The main module is getting big and hard to follow. So we are splitting all the logic to actually run an upgrade in a sub module. It nicely highlight that there are very few actual call point to the code we just moved. Differential Revision: https://phab.mercurial-scm.org/D9476
Sat, 05 Dec 2020 23:11:49 +0100 phab-refresh: add an explanatory message
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 05 Dec 2020 23:11:49 +0100] rev 46045
phab-refresh: add an explanatory message This serve two purposes: - clarify why a bot just touched this diff, - explicit the fact the tests have been run, and are passing on this version. Differential Revision: https://phab.mercurial-scm.org/D9527
Sat, 05 Dec 2020 23:32:11 +0100 phab-refresh: allow passing additional argument to the phabsend
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 05 Dec 2020 23:32:11 +0100] rev 46044
phab-refresh: allow passing additional argument to the phabsend This will be useful to pass a custom message. Differential Revision: https://phab.mercurial-scm.org/D9526
Sat, 05 Dec 2020 23:27:57 +0100 phab-refresh: do not pick draft changeset from the bare "default" branch
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 05 Dec 2020 23:27:57 +0100] rev 46043
phab-refresh: do not pick draft changeset from the bare "default" branch My initial test overlooked a common case: draft changeset on the default branch. So right now, heptapod is doing a final refresh of the patch with the landed version. This is not a bit problem except for the extra noise. However we would be better without the noise. Differential Revision: https://phab.mercurial-scm.org/D9522
Tue, 01 Dec 2020 20:22:24 +0900 log: do not accept string-matcher pattern as -u/-b/-B parameter
Yuya Nishihara <yuya@tcha.org> [Tue, 01 Dec 2020 20:22:24 +0900] rev 46042
log: do not accept string-matcher pattern as -u/-b/-B parameter I'm pretty sure this is a bug introduced after we've switched the filtering backend to revset matcher.
Tue, 01 Dec 2020 19:32:36 +0900 log: do not override other filtering and sorting options by --bookmark
Yuya Nishihara <yuya@tcha.org> [Tue, 01 Dec 2020 19:32:36 +0900] rev 46041
log: do not override other filtering and sorting options by --bookmark This basically reimplements 0aa118f18d4b 'log: add bookmark option to "hg log"'. Before, any other filtering options but --rev were ignored. -G didn't work either since the ordering constraint wasn't enforced.
Tue, 01 Dec 2020 19:23:23 +0900 scmutil: extract function that builds revset expr to select bookmark branch
Yuya Nishihara <yuya@tcha.org> [Tue, 01 Dec 2020 19:23:23 +0900] rev 46040
scmutil: extract function that builds revset expr to select bookmark branch This is needed to process "log -B" option properly. "log" options have to be translated to a revset expression, not to an evaluated set.
Tue, 01 Dec 2020 19:46:01 +0900 scmutil: document that bookmarkrevs() ignores non-head bookmark branch
Yuya Nishihara <yuya@tcha.org> [Tue, 01 Dec 2020 19:46:01 +0900] rev 46039
scmutil: document that bookmarkrevs() ignores non-head bookmark branch "- ancestors(head() and not bookmark(%s))" excludes the bookmarked branch itself if bookmark(%s) is not a head. I'm a bit surprised by this behavior while writing "log -B" tests, so let's document it.
Sat, 07 Nov 2020 16:28:30 -0800 cext: add .pyi files for C extensions
Gregory Szorc <gregory.szorc@gmail.com> [Sat, 07 Nov 2020 16:28:30 -0800] rev 46038
cext: add .pyi files for C extensions I'm unsure if all the annotations are completely accurate. But having these helps type checkers reason about our C extensions. Differential Revision: https://phab.mercurial-scm.org/D9281
Sat, 21 Nov 2020 00:10:36 -0500 phabricator: allow local revisions to be specified with `phabupdate`
Matt Harbison <matt_harbison@yahoo.com> [Sat, 21 Nov 2020 00:10:36 -0500] rev 46037
phabricator: allow local revisions to be specified with `phabupdate` It's way easier and less error prone to specify a revset after importing a series than to manually type in a series of Differentials. Unlike most revision oriented commands, this requires the `--rev` option explicitly because the existing `DREVSPEC` doesn't need to have the leading 'D', and therefore the meaning is ambiguous. I wouldn't have a problem giving precedence to the local revnum, but `phabread` and `phabimport` also use DREVSPEC, and local revisions make no sense there. I would be fine with modifying that definition to require the leading 'D', but I'm not sure how many people are used to not specifying it. Differential Revision: https://phab.mercurial-scm.org/D9356
Fri, 20 Nov 2020 10:51:07 +0100 copies: properly copies parent dictionary before updating it
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Nov 2020 10:51:07 +0100] rev 46036
copies: properly copies parent dictionary before updating it This enforces the copy on write logic. Otherwise independant unrelated branches could affected each other. More testing of these case are coming, but I need that code landed to unlock other performance work in parallel. Differential Revision: https://phab.mercurial-scm.org/D9419
Mon, 30 Nov 2020 14:07:23 +0100 upgrade: display the list of processed revlog before proceeding
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 30 Nov 2020 14:07:23 +0100] rev 46035
upgrade: display the list of processed revlog before proceeding This help to make sure we don't wrongly skip some in the test and to make sure the user is aware of the amount of processing they is signing up for. Differential Revision: https://phab.mercurial-scm.org/D9469
Wed, 02 Dec 2020 08:23:31 +0100 rhg: add a test with persistent-nodemap
Simon Sapin <simon-commits@exyr.org> [Wed, 02 Dec 2020 08:23:31 +0100] rev 46034
rhg: add a test with persistent-nodemap Differential Revision: https://phab.mercurial-scm.org/D9519
Wed, 02 Dec 2020 15:00:49 +0100 rust: use NodePrefix::from_hex instead of hex::decode directly
Simon Sapin <simon-commits@exyr.org> [Wed, 02 Dec 2020 15:00:49 +0100] rev 46033
rust: use NodePrefix::from_hex instead of hex::decode directly This adds support for prefixes with an odd number of hex digits. Differential Revision: https://phab.mercurial-scm.org/D9490
Mon, 30 Nov 2020 19:34:49 +0100 rhg: allow specifying a changeset ID prefix
Simon Sapin <simon-commits@exyr.org> [Mon, 30 Nov 2020 19:34:49 +0100] rev 46032
rhg: allow specifying a changeset ID prefix Differential Revision: https://phab.mercurial-scm.org/D9479
Thu, 03 Dec 2020 13:23:59 -0800 tests: update test-releasenotes-formatting.t with new exit codes
Martin von Zweigbergk <martinvonz@google.com> [Thu, 03 Dec 2020 13:23:59 -0800] rev 46031
tests: update test-releasenotes-formatting.t with new exit codes I didn't have the fuzzywuzzy package installed before, so I didn't notice this test fail earlier (probably when I made `check_incompatible_arguments` return `InputError`). Differential Revision: https://phab.mercurial-scm.org/D9514
Thu, 03 Dec 2020 14:15:39 -0500 merge with stable
Augie Fackler <augie@google.com> [Thu, 03 Dec 2020 14:15:39 -0500] rev 46030
merge with stable
Thu, 03 Dec 2020 13:36:24 -0500 Added signature for changeset 1d5189a57405 stable
Augie Fackler <raf@durin42.com> [Thu, 03 Dec 2020 13:36:24 -0500] rev 46029
Added signature for changeset 1d5189a57405
Thu, 03 Dec 2020 13:36:23 -0500 Added tag 5.6.1 for changeset 1d5189a57405 stable
Augie Fackler <raf@durin42.com> [Thu, 03 Dec 2020 13:36:23 -0500] rev 46028
Added tag 5.6.1 for changeset 1d5189a57405
Wed, 02 Dec 2020 15:39:01 -0800 rebase: clear merge state when aborting in-memory merge on dirty working copy stable 5.6.1
Martin von Zweigbergk <martinvonz@google.com> [Wed, 02 Dec 2020 15:39:01 -0800] rev 46027
rebase: clear merge state when aborting in-memory merge on dirty working copy Differential Revision: https://phab.mercurial-scm.org/D9509
Wed, 02 Dec 2020 15:15:16 -0800 tests: show that in-memory rebase leaves state when working copy is dirty stable
Martin von Zweigbergk <martinvonz@google.com> [Wed, 02 Dec 2020 15:15:16 -0800] rev 46026
tests: show that in-memory rebase leaves state when working copy is dirty When in-memory rebase falls back to on-disk rebase, it checks if the working copy is dirty. If it is, it aborts the rebase. However, it leaves the rebase state on disk. I broke it in feffeb18d412 (rebase: teach in-memory rebase to not restart with on-disk rebase on conflict, 2020-09-18). Differential Revision: https://phab.mercurial-scm.org/D9508
Fri, 27 Nov 2020 14:54:37 -0500 extensions: avoid a crash when the version isn't properly byteified on py3 stable
Matt Harbison <matt_harbison@yahoo.com> [Fri, 27 Nov 2020 14:54:37 -0500] rev 46025
extensions: avoid a crash when the version isn't properly byteified on py3 We already force bytestr on the `testedwith` and `buglink` attributes in dispatch.py when generating a bug report with a similar comment about not every extension being ported to py3. We should do the same here, so the function can be properly typed. Differential Revision: https://phab.mercurial-scm.org/D9433
Mon, 23 Nov 2020 11:47:06 -0500 ui: ensure `getpass()` returns bytes stable
Matt Harbison <matt_harbison@yahoo.com> [Mon, 23 Nov 2020 11:47:06 -0500] rev 46024
ui: ensure `getpass()` returns bytes Previously, this could return either bytes or str. I'm not sure which direction we should go in, but since the input is bytes, I guess bytes makes sense as output. `debuguigetpass` crashed because it assumed bytes would be returned, `sslcontext.load_cert_chain()` is happy with bytes or str if the type info in PyCharm is correct, and `smtplib.SMTP.login()` wants str. I couldn't figure out how to test this, because the test stalls for input with `echo test | hg debuguigetpass --config ui.interactive=1`, likely because it drains stdin before prompting. The custom input reading with `ui.nontty=1` does not. I'm also a bit concerned with all of this encoding/decoding. The existing code in the mail module uses `encoding.strfromlocal()`, but the username and password are ascii encoded/decoded in `mercurial.url.passwordmgr.find_user_password()` with `pycompat.{str,bytes}url()`. I'm not sure if this inconsistency could cause subtle compatability issues. Differential Revision: https://phab.mercurial-scm.org/D9375
Thu, 26 Nov 2020 02:28:42 -0500 packaging: regenerate the Windows requirements manifest on Windows stable
Matt Harbison <matt_harbison@yahoo.com> [Thu, 26 Nov 2020 02:28:42 -0500] rev 46023
packaging: regenerate the Windows requirements manifest on Windows SecretStorage is a Linux package, and the other stuff removed is a dependency of it. I assume this was last generated on Linux, and noticed this trying to add another package and regenerating on Windows. Differential Revision: https://phab.mercurial-scm.org/D9404
Thu, 26 Nov 2020 03:09:56 -0500 pyoxidizer: point to the py3 requirements instead of py2 on Windows stable
Matt Harbison <matt_harbison@yahoo.com> [Thu, 26 Nov 2020 03:09:56 -0500] rev 46022
pyoxidizer: point to the py3 requirements instead of py2 on Windows Differential Revision: https://phab.mercurial-scm.org/D9406
Sat, 21 Nov 2020 16:55:07 -0500 extensions: gracefully warn when doing min version check with no local version stable
Matt Harbison <matt_harbison@yahoo.com> [Sat, 21 Nov 2020 16:55:07 -0500] rev 46021
extensions: gracefully warn when doing min version check with no local version After doing a `make clean`, I started getting cryptic failures to import extensions with the `minimumhgversion` attribute on py3: *** failed to import extension evolve: '>' not supported between instances of 'int' and 'NoneType' *** failed to import extension topic: '>' not supported between instances of 'int' and 'NoneType' This now handles the `(None, None)` tuple before comparing, and disables the extension with the same friendly message as in py2. Differential Revision: https://phab.mercurial-scm.org/D9363
Sat, 28 Nov 2020 11:15:54 +0900 diff: do not concatenate immutable bytes while building a/b bodies (issue6445) stable
Yuya Nishihara <yuya@tcha.org> [Sat, 28 Nov 2020 11:15:54 +0900] rev 46020
diff: do not concatenate immutable bytes while building a/b bodies (issue6445) Use bytearray instead. I don't know what's changed since Python 2, but bytes concatenation is 100x slow on Python 3. % python2.7 -m timeit -s "s = b''" "for i in range(10000): s += b'line'" 1000 loops, best of 3: 321 usec per loop % python3.9 -m timeit -s "s = b''" "for i in range(10000): s += b'line'" 5 loops, best of 5: 39.2 msec per loop Benchmark using tailwind.css (measuring the fast path, a is empty): % HGRCPATH=/dev/null python2.7 ./hg log -R /tmp/issue6445 -p --time \ --color=always --config diff.word-diff=true >/dev/null (prev) time: real 1.580 secs (user 1.560+0.000 sys 0.020+0.000) (this) time: real 1.610 secs (user 1.570+0.000 sys 0.030+0.000) % HGRCPATH=/dev/null python3.9 ./hg log -R /tmp/issue6445 -p --time \ --color=always --config diff.word-diff=true >/dev/null (prev) time: real 114.500 secs (user 114.460+0.000 sys 0.030+0.000) (this) time: real 2.180 secs (user 2.140+0.000 sys 0.040+0.000) Benchmark using random tabular text data (not the fast path): % dd if=/dev/urandom bs=1k count=1000 | hexdump -v -e '16/1 "%3u," "\n"' > ttf % hg ci -ma % dd if=/dev/urandom bs=1k count=1000 | hexdump -v -e '16/1 "%3u," "\n"' > ttf % hg ci -mb % HGRCPATH=/dev/null python2.7 ./hg log -R /tmp/issue6445 -p --time \ --color=always --config diff.word-diff=true >/dev/null (prev) time: real 3.240 secs (user 3.040+0.000 sys 0.200+0.000 (this) time: real 3.230 secs (user 3.070+0.000 sys 0.160+0.000) % HGRCPATH=/dev/null python3.9 ./hg log -R /tmp/issue6445 -p --time \ --color=always --config diff.word-diff=true >/dev/null (prev) time: real 44.130 secs (user 43.850+0.000 sys 0.270+0.000) (this) time: real 4.170 secs (user 3.850+0.000 sys 0.310+0.000)
Tue, 01 Dec 2020 01:18:21 -0500 procutil: use rapply(tonativestr, ...) to preserve lists when they come in stable
Augie Fackler <augie@google.com> [Tue, 01 Dec 2020 01:18:21 -0500] rev 46019
procutil: use rapply(tonativestr, ...) to preserve lists when they come in This was broken when script was a list instead of a string. I caught this with an internal extension at Google, and I'm not really sure why it wasn't caught in any kind of CI. Differential Revision: https://phab.mercurial-scm.org/D9471
Wed, 02 Dec 2020 12:33:51 -0800 statprof: separate functions and "line", assume 4 digit line numbers
Kyle Lippincott <spectral@google.com> [Wed, 02 Dec 2020 12:33:51 -0800] rev 46018
statprof: separate functions and "line", assume 4 digit line numbers Previously, the profile output looked like this (I've removed many lines that are mostly inconsequential): ``` | 100.0% 0.02s hg: <module> line 43: dispatch.run() | 100.0% 0.02s dispatch.py: run line 115: status = dispatch(req) | 100.0% 0.02s dispatch.py: _runcatchfunc line 432: return _dispatch(req) \ 50.0% 0.01s dispatch.py: _dispatch line 1228: return runcommand( | 50.0% 0.01s dispatch.py: runcommand line 883: ret = _runcommand(ui, optio... | 50.0% 0.01s dispatch.py: _runcommand line 1240: return cmdfunc() | 50.0% 0.01s localrepo.py: __getitem__ line 1670: quick_access = self._quick_... | 50.0% 0.01s localrepo.py: _quick_access_changeidline 1650: return self._quick_access_c... | 50.0% 0.01s localrepo.py: __get__ line 179: return getattr(unfi, self.n... | 50.0% 0.01s util.py: __get__ line 1747: result = self.func(obj) | 50.0% 0.01s localrepo.py: _quick_access_changeid_wcline 1611: cl = self.unfiltered().chan... | 50.0% 0.01s localrepo.py: __get__ line 110: return super(_basefilecache... | 50.0% 0.01s util.py: __getattribute__line 245: self.__spec__.loader.exec_m... | 50.0% 0.01s <frozen importlib._bootstrap_external>: exec_moduleline 783: | 50.0% 0.01s <frozen importlib._bootstrap>: _call_with_frames_removedline 219: | 50.0% 0.01s changelog.py: <module> line 376: class changelog(revlog.revl... | 50.0% 0.01s util.py: __getattribute__line 245: self.__spec__.loader.exec_m... | 50.0% 0.01s <frozen importlib._bootstrap_external>: exec_moduleline 779: | 50.0% 0.01s <frozen importlib._bootstrap_external>: get_codeline 868: | 50.0% 0.01s <frozen importlib._bootstrap_external>: path_statsline 1012: | 50.0% 0.01s <frozen importlib._bootstrap_external>: _path_statline 87: ``` This has a few problems, though I'm only addressing some of them. 1. If the stuff before "line ###" is long, there's no separation between the function name and the "line" string. 2. If the stuff before "line ###" is really long, there's excessive separation between the "line" string and the line number. 3. We frequently have 4-digit line numbers, the code on the right wasn't dynamically indented and ended up quite messy looking. To solve these problems, I've added a ", " prefix before "line" iff it would otherwise not have any separation such as spaces. I've added a 'max' so that we never use a negative width (which is the cause of problem #2 above), and I've added a default assumption of 4 digit line numbers (but again using a 'max' so this shouldn't cause problems if we go beyond that. With these changes, it now looks like this: ``` | 100.0% 0.02s hg: <module> line 43: dispatch.run() | 100.0% 0.02s dispatch.py: run line 115: status = dispatch(req) | 100.0% 0.02s dispatch.py: _runcatchfunc line 432: return _dispatch(req) \ 50.0% 0.01s dispatch.py: _dispatch line 1228: return runcommand( | 50.0% 0.01s dispatch.py: runcommand line 883: ret = _runcommand(ui, optio... | 50.0% 0.01s dispatch.py: _runcommand line 1240: return cmdfunc() | 50.0% 0.01s localrepo.py: __getitem__ line 1670: quick_access = self._quick_... | 50.0% 0.01s localrepo.py: _quick_access_changeid, line 1650: return self._quick_access_c... | 50.0% 0.01s localrepo.py: __get__ line 179: return getattr(unfi, self.n... | 50.0% 0.01s util.py: __get__ line 1747: result = self.func(obj) | 50.0% 0.01s localrepo.py: _quick_access_changeid_wc, line 1611: cl = self.unfiltered().chan... | 50.0% 0.01s localrepo.py: __get__ line 110: return super(_basefilecache... | 50.0% 0.01s util.py: __getattribute__, line 245: self.__spec__.loader.exec_m... | 50.0% 0.01s <frozen importlib._bootstrap_external>: exec_module, line 783: | 50.0% 0.01s <frozen importlib._bootstrap>: _call_with_frames_removed, line 219: | 50.0% 0.01s changelog.py: <module> line 376: class changelog(revlog.revl... | 50.0% 0.01s util.py: __getattribute__, line 245: self.__spec__.loader.exec_m... | 50.0% 0.01s <frozen importlib._bootstrap_external>: exec_module, line 779: | 50.0% 0.01s <frozen importlib._bootstrap_external>: get_code, line 868: | 50.0% 0.01s <frozen importlib._bootstrap_external>: path_stats, line 1012: | 50.0% 0.01s <frozen importlib._bootstrap_external>: _path_stat, line 87: ``` Differential Revision: https://phab.mercurial-scm.org/D9511
Wed, 02 Dec 2020 15:38:05 -0800 statprof: fix off-by-one-line error in output
Kyle Lippincott <spectral@google.com> [Wed, 02 Dec 2020 15:38:05 -0800] rev 46017
statprof: fix off-by-one-line error in output martinvonz claims they thought that this was intentional, but couldn't remember the reasoning for it. I can't understand why it would be preferable, and I didn't see anything in the comments in the file about why this would be useful, so I'm hopefully not breaking anything by "fixing" it. ### Old output ``` | 100.0% 0.01s dispatch.py: run line 43: dispatch.run() | 100.0% 0.01s dispatch.py: dispatch line 115: status = dispatch(req) | 100.0% 0.01s dispatch.py: _runcatch line 266: ret = _runcatch(req) or 0 | 100.0% 0.01s dispatch.py: _callcatch line 442: return _callcatch(ui, _runc... | 100.0% 0.01s scmutil.py: callcatch line 451: return scmutil.callcatch(ui... | 100.0% 0.01s dispatch.py: _runcatchfunc line 155: return func() | 100.0% 0.01s dispatch.py: _dispatch line 432: return _dispatch(req) | 100.0% 0.01s hg.py: repository line 1179: repo = hg.repository( | 100.0% 0.01s hg.py: _peerorrepo line 221: peer = _peerorrepo( | 100.0% 0.01s util.py: __getattribute__ line 188: obj = _peerlookup(path).ins... | 100.0% 0.01s localrepo.py: makelocalrepositoryline 3227: return makelocalrepository(... | 100.0% 0.01s localrepo.py: __init__ line 683: return cls( | 100.0% 0.01s util.py: __getattribute__ line 1262: self._extrafilterid = repov... | 100.0% 0.01s <frozen importlib._bootstrap_external>: exec_moduleline 245: self.__spec__.loader.exec_m... | 100.0% 0.01s <frozen importlib._bootstrap_external>: get_codeline 779: | 100.0% 0.01s <frozen importlib._bootstrap_external>: path_statsline 868: | 100.0% 0.01s <frozen importlib._bootstrap_external>: _path_statline 1012: ``` ### New output ``` | 100.0% 0.01s hg: <module> line 43: dispatch.run() | 100.0% 0.01s dispatch.py: run line 115: status = dispatch(req) | 100.0% 0.01s dispatch.py: dispatch line 266: ret = _runcatch(req) or 0 | 100.0% 0.01s dispatch.py: _runcatch line 442: return _callcatch(ui, _runc... | 100.0% 0.01s dispatch.py: _callcatch line 451: return scmutil.callcatch(ui... | 100.0% 0.01s scmutil.py: callcatch line 155: return func() | 100.0% 0.01s dispatch.py: _runcatchfunc line 432: return _dispatch(req) | 100.0% 0.01s dispatch.py: _dispatch line 1179: repo = hg.repository( | 100.0% 0.01s hg.py: repository line 221: peer = _peerorrepo( | 100.0% 0.01s hg.py: _peerorrepo line 188: obj = _peerlookup(path).ins... | 100.0% 0.01s localrepo.py: instance line 3227: return makelocalrepository(... | 100.0% 0.01s localrepo.py: makelocalrepositoryline 683: return cls( | 100.0% 0.01s localrepo.py: __init__ line 1262: self._extrafilterid = repov... | 100.0% 0.01s util.py: __getattribute__ line 245: self.__spec__.loader.exec_m... | 100.0% 0.01s <frozen importlib._bootstrap_external>: exec_moduleline 779: | 100.0% 0.01s <frozen importlib._bootstrap_external>: get_codeline 868: | 100.0% 0.01s <frozen importlib._bootstrap_external>: path_statsline 1012: | 100.0% 0.01s <frozen importlib._bootstrap_external>: _path_statline 87: ``` Differential Revision: https://phab.mercurial-scm.org/D9510
Thu, 03 Dec 2020 08:09:56 +0100 phab-refresh: do not error out when the stack is empty
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 03 Dec 2020 08:09:56 +0100] rev 46016
phab-refresh: do not error out when the stack is empty Actually, empty stack is easier to get than I expected (and harmless). When a stack is publish, heptapod will detect the even, empty the stack (triggering CI) and "forgetting" the branch afterward. So we stop returning as error in this case. Differential Revision: https://phab.mercurial-scm.org/D9513
Wed, 02 Dec 2020 20:10:27 +0100 run-tests: allow some slack about 'waiting on lock' message
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 02 Dec 2020 20:10:27 +0100] rev 46015
run-tests: allow some slack about 'waiting on lock' message It is common to run the tests on very loaded machine when concurrent run might take a bit longer. Such message are usually harmless, but anoying as they break the tests. Test that explicitly depends on this value have been adjusted. This make them more robust anyway. A fun case was `test-clone-pull-corruption.t` which, without the previous changeset introducing extra flushing, ended use having a line 31 (`pulling from ../source`) changing order because the warning message was no longer flushing stdin before using stderr (stderr being invisible in the test). Differential Revision: https://phab.mercurial-scm.org/D9507
Wed, 02 Dec 2020 23:15:11 +0100 pull: flush stdin after the `pull from` message
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 02 Dec 2020 23:15:11 +0100] rev 46014
pull: flush stdin after the `pull from` message That message can end up being flushed after some stderr message in some case, leading to confusing output. Differential Revision: https://phab.mercurial-scm.org/D9506
Wed, 02 Dec 2020 20:10:22 +0100 tests: explicitly skip the lock warning in some remotefilelog tests
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 02 Dec 2020 20:10:22 +0100] rev 46013
tests: explicitly skip the lock warning in some remotefilelog tests The output was conditional zed, so lets official skip it instead. Differential Revision: https://phab.mercurial-scm.org/D9505
Wed, 02 Dec 2020 20:02:35 +0100 tests: use the right python when running dummyssh for narrow
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 02 Dec 2020 20:02:35 +0100] rev 46012
tests: use the right python when running dummyssh for narrow some plateform no longer have a `python` executable. Differential Revision: https://phab.mercurial-scm.org/D9504
Wed, 02 Dec 2020 11:05:53 -0800 copies: avoid materializing a full directory map during copy tracing
Kyle Lippincott <spectral@google.com> [Wed, 02 Dec 2020 11:05:53 -0800] rev 46011
copies: avoid materializing a full directory map during copy tracing Materializing a full copy of every directory in a treemanifest repo can be quite expensive, even with a narrow matcher. For flat manifest repos, this should be equivalent - it will still materialize (and cache) a dict of all of the dirs inside of the manifest object, we just don't get a copy of it. In a repo I have here, this brings the time for a simple rebase from 11.197s to 4.609s. Differential Revision: https://phab.mercurial-scm.org/D9503
(0) -30000 -10000 -3000 -1000 -300 -100 -56 +56 +100 +300 +1000 +3000 tip