hgweb: remove unused Graph() properties Both of these were introduced in 0dba955c2636, but were already unused.

gitweb: remove unused css classes Looks like they were unused since the very introduction of gitweb theme in 385b8872b8e3.

monoblue: also highlight target line on annotate and comparison pages Clicking on a line link on pages that show any kind of file contents (including diffs) should highlight that line, and in monoblue it works when there's a <pre> element (e.g. diff), but pages that use <table> element (annotate and compare) need this css class. It matches and highlights linked (":target") table rows. This line is pretty much copied from gitweb theme.

paper: remove css hack that made .branchname look like .branchhead There's a visual difference in hgweb between one changeset that is the tip of its branch and another that simply belongs to that branch. But paper theme ignored this difference on changeset page and used to always use "branchname" css class, be that changeset the tip of its branch or not. That has been recently fixed, so this piece of css is not needed anymore.

hgweb: rename the main attribute of instabilities Let's make "instabilities" list contain items with "instability" key as opposed to "name" key. This way it's more explicit and more consistent with the log command-line template.

hbisect: use a defaultdict to avoid large allocations for a large changelogs We can avoid a SPACE(len(changelog)) allocation by using a defaultdict. Test Plan: python run-tests.py test-bisect* Differential Revision: https://phab.mercurial-scm.org/D1499

hbisect: use a revset for ancestor calculation Since we have revsets we can be more concise in doing the ancestor calulcation. Significant commits are all descendent of the topmost good commits. Test Plan: python run-tests.py test-bisect* Differential Revision: https://phab.mercurial-scm.org/D1498

hbisect: pass repo into hbisect.bisect Pass repo into the bisect function to get more flexibility in what we can call. This will allow us to use revsets to rewrite parts of the ancestor and children calculation in later patches. Test Plan: python run-tests.py test-bisect* Differential Revision: https://phab.mercurial-scm.org/D1497

develwarn: do not emit warning if "config" is unspecified Previously, if the develwarn call site did not specify the category of warning, and devel.all-warnings was False, it would emit the warning. If it was intended that this emit a warning if config is unspecified, I would have expected a comment, so I assumed this was unintentional and am changing the behavior. Differential Revision: https://phab.mercurial-scm.org/D1494

histedit: add support to output nodechanges using formatter The JSON output of nodechanges will help in automation and to improve editor integrations such as for Nuclide. Differential Revision: https://phab.mercurial-scm.org/D1348

rebase: use fm.formatlist() and fm.formatdict() to support user template Thanks to Yuya for suggesting this in D1173. Differential Revision: https://phab.mercurial-scm.org/D1293

tests: add test for rebase template showing wrong behavior The output for template "{nodechanges % '{key}:{value}'}" does not contain the output for value. Differential Revision: https://phab.mercurial-scm.org/D1462

remove: print message for each file in verbose mode only while using `-A` (BC) hg rm -A option prints the message of every file in the repo. This is not very user friendly for a big repository with thousands of files. So enabling this feature only when run in --verbose mode (hg rm -Av) Differential Revision: https://phab.mercurial-scm.org/D1336

localrepo: update comments around path auditors

localrepo: specify optional callback parameter to pathauditor as a keyword

bundle2: avoid unbound read when seeking Currently, seekableunbundlepart.seek() will perform a read() during seek operations. This will allocate a buffer to hold the raw data over the seek distance. This can lead to very large allocations and cause performance to suffer. We change the code to perform read(32768) in a loop to avoid potentially large allocations. `hg perfbundleread` on an uncompressed Firefox bundle reveals a performance impact: ! bundle2 iterparts() ! wall 2.992605 comb 2.990000 user 2.260000 sys 0.730000 (best of 4) ! bundle2 iterparts() seekable ! wall 3.863810 comb 3.860000 user 3.000000 sys 0.860000 (best of 3) ! bundle2 part seek() ! wall 6.213387 comb 6.200000 user 3.350000 sys 2.850000 (best of 3) ! wall 3.820347 comb 3.810000 user 2.980000 sys 0.830000 (best of 3) Since seekable bundle parts are (only) used by bundlerepo, this /may/ speed up initial loading of bundle-based repos. But any improvement will likely only be noticed on very large bundles. Differential Revision: https://phab.mercurial-scm.org/D1394

bundle2: inline struct operations Before, we were calling struct.unpack() (via an alias) on every loop iteration. I'm not sure what Python does under the hood, but it would have to look at the struct format and determine what to do. This commit establishes a struct.Struct instance and reuses it for struct reading. We can see the impact from running `hg perfbundleread` on a Firefox bundle: ! read(8k) ! wall 0.679730 comb 0.680000 user 0.140000 sys 0.540000 (best of 15) ! read(16k) ! wall 0.577228 comb 0.570000 user 0.080000 sys 0.490000 (best of 17) ! read(32k) ! wall 0.516060 comb 0.520000 user 0.040000 sys 0.480000 (best of 20) ! read(128k) ! wall 0.496378 comb 0.490000 user 0.010000 sys 0.480000 (best of 20) ! bundle2 iterparts() ! wall 3.056811 comb 3.050000 user 2.340000 sys 0.710000 (best of 4) ! wall 2.992605 comb 2.990000 user 2.260000 sys 0.730000 (best of 4) ! bundle2 iterparts() seekable ! wall 4.007676 comb 4.000000 user 3.170000 sys 0.830000 (best of 3) ! wall 3.863810 comb 3.860000 user 3.000000 sys 0.860000 (best of 3) ! bundle2 part seek() ! wall 6.267110 comb 6.250000 user 3.480000 sys 2.770000 (best of 3) ! wall 6.213387 comb 6.200000 user 3.350000 sys 2.850000 (best of 3) ! bundle2 part read(8k) ! wall 3.404164 comb 3.400000 user 2.650000 sys 0.750000 (best of 3) ! wall 3.241099 comb 3.250000 user 2.560000 sys 0.690000 (best of 3) ! bundle2 part read(16k) ! wall 3.197972 comb 3.200000 user 2.490000 sys 0.710000 (best of 4) ! wall 3.003930 comb 3.000000 user 2.270000 sys 0.730000 (best of 4) ! bundle2 part read(32k) ! wall 3.060557 comb 3.060000 user 2.340000 sys 0.720000 (best of 4) ! wall 2.904695 comb 2.900000 user 2.160000 sys 0.740000 (best of 4) ! bundle2 part read(128k) ! wall 2.952209 comb 2.950000 user 2.230000 sys 0.720000 (best of 4) ! wall 2.776140 comb 2.780000 user 2.070000 sys 0.710000 (best of 4) Profiling now says most remaining time is spent in util.chunkbuffer. I already heavily optimized that data structure several releases ago. So we'll likely get little more performance out of bundle2 reading while still retaining util.chunkbuffer(). Differential Revision: https://phab.mercurial-scm.org/D1393

bundle2: inline changegroup.readexactly() Profiling reveals this loop is pretty tight. Literally any function call elimination can make a big difference. This commit inlines the relatively trivial changegroup.readexactly() method inside the loop. The results with `hg perfbundleread` on a bundle of the Firefox repo speak for themselves: ! read(8k) ! wall 0.679730 comb 0.680000 user 0.140000 sys 0.540000 (best of 15) ! read(16k) ! wall 0.577228 comb 0.570000 user 0.080000 sys 0.490000 (best of 17) ! read(32k) ! wall 0.516060 comb 0.520000 user 0.040000 sys 0.480000 (best of 20) ! read(128k) ! wall 0.496378 comb 0.490000 user 0.010000 sys 0.480000 (best of 20) ! bundle2 iterparts() ! wall 3.460903 comb 3.460000 user 2.760000 sys 0.700000 (best of 3) ! wall 3.056811 comb 3.050000 user 2.340000 sys 0.710000 (best of 4) ! bundle2 iterparts() seekable ! wall 4.312722 comb 4.310000 user 3.480000 sys 0.830000 (best of 3) ! wall 4.007676 comb 4.000000 user 3.170000 sys 0.830000 (best of 3) ! bundle2 part seek() ! wall 6.754764 comb 6.740000 user 3.970000 sys 2.770000 (best of 3) ! wall 6.267110 comb 6.250000 user 3.480000 sys 2.770000 (best of 3) ! bundle2 part read(8k) ! wall 3.668004 comb 3.660000 user 2.960000 sys 0.700000 (best of 3) ! wall 3.404164 comb 3.400000 user 2.650000 sys 0.750000 (best of 3) ! bundle2 part read(16k) ! wall 3.489196 comb 3.480000 user 2.750000 sys 0.730000 (best of 3) ! wall 3.197972 comb 3.200000 user 2.490000 sys 0.710000 (best of 4) ! bundle2 part read(32k) ! wall 3.388569 comb 3.380000 user 2.640000 sys 0.740000 (best of 3) ! wall 3.060557 comb 3.060000 user 2.340000 sys 0.720000 (best of 4) ! bundle2 part read(128k) ! wall 3.276415 comb 3.270000 user 2.560000 sys 0.710000 (best of 4) ! wall 2.952209 comb 2.950000 user 2.230000 sys 0.720000 (best of 4) Differential Revision: https://phab.mercurial-scm.org/D1392

bundle2: inline debug logging Profiling revealed that repeated calls to indebug() were consuming a fair amount of CPU during bundle2 reading, with most of the time spent in ui.configbool(). Inlining indebug() and avoiding extra attribute lookups speeds things up substantially. Using `hg perfbundleread` with a Firefox bundle: ! read(8k) ! wall 0.679730 comb 0.680000 user 0.140000 sys 0.540000 (best of 15) ! read(16k) ! wall 0.577228 comb 0.570000 user 0.080000 sys 0.490000 (best of 17) ! read(32k) ! wall 0.516060 comb 0.520000 user 0.040000 sys 0.480000 (best of 20) ! read(128k) ! wall 0.496378 comb 0.490000 user 0.010000 sys 0.480000 (best of 20) ! bundle2 iterparts() ! wall 6.983756 comb 6.980000 user 6.220000 sys 0.760000 (best of 3) ! wall 3.460903 comb 3.460000 user 2.760000 sys 0.700000 (best of 3) ! bundle2 iterparts() seekable ! wall 8.132131 comb 8.110000 user 7.160000 sys 0.950000 (best of 3) ! wall 4.312722 comb 4.310000 user 3.480000 sys 0.830000 (best of 3) ! bundle2 part seek() ! wall 10.860942 comb 10.840000 user 7.790000 sys 3.050000 (best of 3) ! wall 6.754764 comb 6.740000 user 3.970000 sys 2.770000 (best of 3) ! bundle2 part read(8k) ! wall 7.258035 comb 7.260000 user 6.470000 sys 0.790000 (best of 3) ! wall 3.668004 comb 3.660000 user 2.960000 sys 0.700000 (best of 3) ! bundle2 part read(16k) ! wall 7.099891 comb 7.080000 user 6.310000 sys 0.770000 (best of 3) ! wall 3.489196 comb 3.480000 user 2.750000 sys 0.730000 (best of 3) ! bundle2 part read(32k) ! wall 6.964685 comb 6.950000 user 6.130000 sys 0.820000 (best of 3) ! wall 3.388569 comb 3.380000 user 2.640000 sys 0.740000 (best of 3) ! bundle2 part read(128k) ! wall 6.852867 comb 6.850000 user 6.060000 sys 0.790000 (best of 3) ! wall 3.276415 comb 3.270000 user 2.560000 sys 0.710000 (best of 4) Differential Revision: https://phab.mercurial-scm.org/D1391

bundle2: don't use seekable bundle2 parts by default (issue5691) The last commit removed the last use of the bundle2 part seek() API in the generic bundle2 part iteration code. This means we can now switch to using unseekable bundle2 parts by default and have the special consumers that actually need the behavior request it. This commit changes unbundle20.iterparts() to expose non-seekable unbundlepart instances by default. If seekable parts are needed, callers can pass "seekable=True." The bundlerepo class needs seekable parts, so it does this. The interrupt handler is also changed to use a regular unbundlepart. So, by default, all consumers except bundlerepo will see unseekable parts. Because the behavior of the iterparts() benchmark changed, we add a variation to test seekable parts vs unseekable parts. And because parts no longer have seek() unless "seekable=True," we update the "part seek" benchmark. Speaking of benchmarks, this change has the following impact to `hg perfbundleread` on an uncompressed bundle of the Firefox repo (6,070,036,163 bytes): ! read(8k) ! wall 0.722709 comb 0.720000 user 0.150000 sys 0.570000 (best of 14) ! read(16k) ! wall 0.602208 comb 0.590000 user 0.080000 sys 0.510000 (best of 17) ! read(32k) ! wall 0.554018 comb 0.560000 user 0.050000 sys 0.510000 (best of 18) ! read(128k) ! wall 0.520086 comb 0.530000 user 0.020000 sys 0.510000 (best of 20) ! bundle2 forwardchunks() ! wall 2.996329 comb 3.000000 user 2.300000 sys 0.700000 (best of 4) ! bundle2 iterparts() ! wall 8.070791 comb 8.060000 user 7.180000 sys 0.880000 (best of 3) ! wall 6.983756 comb 6.980000 user 6.220000 sys 0.760000 (best of 3) ! bundle2 iterparts() seekable ! wall 8.132131 comb 8.110000 user 7.160000 sys 0.950000 (best of 3) ! bundle2 part seek() ! wall 10.370142 comb 10.350000 user 7.430000 sys 2.920000 (best of 3) ! wall 10.860942 comb 10.840000 user 7.790000 sys 3.050000 (best of 3) ! bundle2 part read(8k) ! wall 8.599892 comb 8.580000 user 7.720000 sys 0.860000 (best of 3) ! wall 7.258035 comb 7.260000 user 6.470000 sys 0.790000 (best of 3) ! bundle2 part read(16k) ! wall 8.265361 comb 8.250000 user 7.360000 sys 0.890000 (best of 3) ! wall 7.099891 comb 7.080000 user 6.310000 sys 0.770000 (best of 3) ! bundle2 part read(32k) ! wall 8.290308 comb 8.280000 user 7.330000 sys 0.950000 (best of 3) ! wall 6.964685 comb 6.950000 user 6.130000 sys 0.820000 (best of 3) ! bundle2 part read(128k) ! wall 8.204900 comb 8.150000 user 7.210000 sys 0.940000 (best of 3) ! wall 6.852867 comb 6.850000 user 6.060000 sys 0.790000 (best of 3) The significant speedup is due to not incurring the overhead to track payload offset data. Of course, this overhead is proportional to bundle2 part size. So a multiple gigabyte changegroup part is on the extreme side of the spectrum for real-world impact. In addition to the CPU efficiency wins, not tracking offset data also means not using memory to hold that data. Using a bundle based on the example BSD repository in issue 5691, this change has a drastic impact to memory usage during `hg unbundle` (`hg clone` would behave similarly). Before, memory usage incrementally increased for the duration of bundle processing. In other words, as we advanced through the changegroup and bundle2 part, we kept allocating more memory to hold offset data. After this change, we still increase memory during changegroup application. But the rate of increase is significantly slower. (A bulk of the remaining gradual increase appears to be the storing of revlog sizes in the transaction object to facilitate rollback.) The RSS at the end of filelog application is as follows: Before: ~752 MB After: ~567 MB So, we were storing ~185 MB of offset data that we never even used. Talk about wasteful! .. api:: bundle2 parts are no longer seekable by default. .. perf:: bundle2 read I/O throughput significantly increased. .. perf:: Significant memory use reductions when reading from bundle2 bundles. On the BSD repository, peak RSS during changegroup application decreased by ~185 MB from ~752 MB to ~567 MB. Differential Revision: https://phab.mercurial-scm.org/D1390

bundle2: only seek to beginning of part in bundlerepo For reasons still not yet fully understood by me, bundlerepo requires its changegroup bundle2 part to be seeked to beginning after part iteration. As far as I can tell, it is the only bundle2 part consumer that relies on this behavior. This seeking was performed in the generic iterparts() API. Again, I don't fully understand why it was here and not in bundlerepo. Probably historical reasons. What I do know is that all other bundle2 part consumers don't need this special behavior (assuming the tests are comprehensive). So, we move the code from bundle2's iterparts() to bundlerepo's consumption of iterparts(). Differential Revision: https://phab.mercurial-scm.org/D1389

bundle2: implement consume() API on unbundlepart We want bundle parts to not be seekable by default. That means eliminating the generic seek() method. A common pattern in bundle2.py is to seek to the end of the part data. This is mainly used by the part iteration code to ensure the underlying stream is advanced to the next bundle part. In this commit, we establish a dedicated API for consuming a bundle2 part data. We switch users of seek() to it. The old implementation of seek(0, os.SEEK_END) would effectively call self.read(). The new implementation calls self.read(32768) in a loop. The old implementation would therefore assemble a buffer to hold all remaining data being seeked over. For seeking over large bundle parts, this would involve a large allocation and a lot of overhead to collect intermediate data! This overhead can be seen in the results for `hg perfbundleread`: ! bundle2 iterparts() ! wall 10.891305 comb 10.820000 user 7.990000 sys 2.830000 (best of 3) ! wall 8.070791 comb 8.060000 user 7.180000 sys 0.880000 (best of 3) ! bundle2 part seek() ! wall 12.991478 comb 10.390000 user 7.720000 sys 2.670000 (best of 3) ! wall 10.370142 comb 10.350000 user 7.430000 sys 2.920000 (best of 3) Of course, skipping over large payload data isn't likely very common. So I doubt the performance wins will be observed in the wild. Differential Revision: https://phab.mercurial-scm.org/D1388

bundle2: implement generic part payload decoder The previous commit extracted _payloadchunks() to a new derived class. There was still a reference to this method in unbundlepart, making unbundlepart unusable on its own. This commit implements a generic version of a bundle2 part payload decoder, without offset tracking. seekableunbundlepart._payloadchunks() has been refactored to consume it, adding offset tracking like before. We also implement unbundlepart._payloadchunks(), which is a thin wrapper for it. Since we never instantiate unbundlepart directly, this new method is not used. This will be changed in subsequent commits. The new implementation also inlines some simple code from unpackermixin and adds some local variable to prevent extra function calls and attribute lookups. `hg perfbundleread` on an uncompressed Firefox bundle seems to show a minor win: ! bundle2 iterparts() ! wall 12.593258 comb 12.250000 user 8.870000 sys 3.380000 (best of 3) ! wall 10.891305 comb 10.820000 user 7.990000 sys 2.830000 (best of 3) ! bundle2 part seek() ! wall 13.173163 comb 11.100000 user 8.390000 sys 2.710000 (best of 3) ! wall 12.991478 comb 10.390000 user 7.720000 sys 2.670000 (best of 3) ! bundle2 part read(8k) ! wall 9.483612 comb 9.480000 user 8.420000 sys 1.060000 (best of 3) ! wall 8.599892 comb 8.580000 user 7.720000 sys 0.860000 (best of 3) ! bundle2 part read(16k) ! wall 9.159815 comb 9.150000 user 8.220000 sys 0.930000 (best of 3) ! wall 8.265361 comb 8.250000 user 7.360000 sys 0.890000 (best of 3) ! bundle2 part read(32k) ! wall 9.141308 comb 9.130000 user 8.220000 sys 0.910000 (best of 3) ! wall 8.290308 comb 8.280000 user 7.330000 sys 0.950000 (best of 3) ! bundle2 part read(128k) ! wall 8.880587 comb 8.850000 user 7.960000 sys 0.890000 (best of 3) ! wall 8.204900 comb 8.150000 user 7.210000 sys 0.940000 (best of 3) Function call overhead in Python strikes again! Of course, bundle2 decoding CPU overhead is likely small compared to decompression and changegroup application. But every little bit helps. Differential Revision: https://phab.mercurial-scm.org/D1387

bundle2: extract logic for seeking bundle2 part into own class Currently, unbundlepart classes support bi-directional seeking. Most consumers of unbundlepart only ever seek forward - typically as part of moving to the end of the bundle part so they can move on to the next one. But regardless of the actual usage of the part, instances maintain an index mapping offsets within the underlying raw payload to offsets within the decoded payload. Maintaining the mapping of offset data can be expensive in terms of memory use. Furthermore, many bundle2 consumers don't have access to an underlying seekable stream. This includes all compressed bundles. So maintaining offset data when the underlying stream can't be seeked anyway is wasteful. And since many bundle2 streams can't be seeked, it seems like a bad idea to expose a seek API in bundle2 parts by default. If you provide them, people will attempt to use them. Seekable bundle2 parts should be the exception, not the rule. This commit starts the process dividing unbundlepart into 2 classes: a base class that supports linear, one-time reads and a child class that supports bi-directional seeking. In this first commit, we split various methods and attributes out into a new "seekableunbundlepart" class. Previous instantiators of "unbundlepart" now instantiate "seekableunbundlepart." This preserves backwards compatibility. The coupling between the classes is still tight: "unbundlepart" cannot be used on its own. This will be addressed in subsequent commits. Differential Revision: https://phab.mercurial-scm.org/D1386

merge with i18n

i18n-pt_BR: synchronized with cabc840ffdee

perf: add command to benchmark bundle reading Upcoming commits will be refactoring bundle2 I/O code. This commit establishes a `hg perfbundleread` command that measures how long it takes to read a bundle using various mechanisms. As a baseline, here's output from an uncompressed bundle1 bundle of my Firefox repo (7,098,622,890 bytes): ! read(8k) ! wall 0.763481 comb 0.760000 user 0.160000 sys 0.600000 (best of 6) ! read(16k) ! wall 0.644512 comb 0.640000 user 0.110000 sys 0.530000 (best of 16) ! read(32k) ! wall 0.581172 comb 0.590000 user 0.060000 sys 0.530000 (best of 18) ! read(128k) ! wall 0.535183 comb 0.530000 user 0.010000 sys 0.520000 (best of 19) ! cg1 deltaiter() ! wall 0.873500 comb 0.880000 user 0.840000 sys 0.040000 (best of 12) ! cg1 getchunks() ! wall 6.283797 comb 6.270000 user 5.570000 sys 0.700000 (best of 3) ! cg1 read(8k) ! wall 1.097173 comb 1.100000 user 0.400000 sys 0.700000 (best of 10) ! cg1 read(16k) ! wall 0.810750 comb 0.800000 user 0.200000 sys 0.600000 (best of 13) ! cg1 read(32k) ! wall 0.671215 comb 0.670000 user 0.110000 sys 0.560000 (best of 15) ! cg1 read(128k) ! wall 0.597857 comb 0.600000 user 0.020000 sys 0.580000 (best of 15) And from an uncompressed bundle2 bundle (6,070,036,163 bytes): ! read(8k) ! wall 0.676997 comb 0.680000 user 0.160000 sys 0.520000 (best of 15) ! read(16k) ! wall 0.592706 comb 0.590000 user 0.080000 sys 0.510000 (best of 17) ! read(32k) ! wall 0.529395 comb 0.530000 user 0.050000 sys 0.480000 (best of 16) ! read(128k) ! wall 0.491270 comb 0.490000 user 0.010000 sys 0.480000 (best of 19) ! bundle2 forwardchunks() ! wall 2.997131 comb 2.990000 user 2.270000 sys 0.720000 (best of 4) ! bundle2 iterparts() ! wall 12.247197 comb 10.670000 user 8.170000 sys 2.500000 (best of 3) ! bundle2 part seek() ! wall 11.761675 comb 10.500000 user 8.240000 sys 2.260000 (best of 3) ! bundle2 part read(8k) ! wall 9.116163 comb 9.110000 user 8.240000 sys 0.870000 (best of 3) ! bundle2 part read(16k) ! wall 8.984362 comb 8.970000 user 8.110000 sys 0.860000 (best of 3) ! bundle2 part read(32k) ! wall 8.758364 comb 8.740000 user 7.860000 sys 0.880000 (best of 3) ! bundle2 part read(128k) ! wall 8.749040 comb 8.730000 user 7.830000 sys 0.900000 (best of 3) We already see some interesting data. Notably that bundle2 has significant overhead compared to bundle1. This matters for e.g. stream clone bundles, which can be applied at >1Gbps. Differential Revision: https://phab.mercurial-scm.org/D1385

sshpeer: add a configurable hint for the ssh error message Adding a possibility to configure error hint to be shown in the case of problems with SSH. Example of such hint can be "Please see http://company/internalwiki/ssh.html". Test Plan: - Ran hg pull with broken link and verified the output has no hint by default: ``` pulling from ssh://brokenrepository.com//repo remote: ssh: Could not resolve hostname brokenrepository.com: Name or service not known abort: no suitable response from remote hg! ``` - Run hg pull --config ui.ssherrorhint="Please see http://company/internalwiki/ssh.html": ``` pulling from ssh://brokenrepository.com//repo remote: ssh: Could not resolve hostname brokenrepository.com: Name or service not known abort: no suitable response from remote hg! (Please see http://company/internalwiki/ssh.html) ``` Differential Revision: https://phab.mercurial-scm.org/D1431

docs: add args/returns docs for some cmdutil, context, and registrar functions When writing my first extension, I found it hard to figure out these functions. I figured documenting their inputs/outputs would help future authors who are new to the codebase. Differential Revision: https://phab.mercurial-scm.org/D1440

commands: add value for cmdtype argument for read only commands In the previous release we added an argument `cmdtype` to registrar.command() which is a enum and tells whether the command is read only, recoverable write or unrecoverable write command. This patch add the value of cmdtype argument for commands which are read only. Differential Revision: https://phab.mercurial-scm.org/D1468