setup: set mode 644 or 755 on installed files

branches: reduce nesting in for loop

i18n: use datapath for i18n like for templates and help To avoid circular module dependencies we initialize i18n from util when datapath is found.

help: don't search randomly for help data - trust util.datapath The search was introduced in c904e76e3834 without a convincing explanation why it should be necessary ... except for consistency with templater handling. Now, just keep it simple.

templater: don't search randomly for templates - trust util.datapath The search was introduced in 2653740d8118. It might have been necessary back then when using __file__ directly and frozen-ness wasn't considered. Now we should know exactly where the templates can be found.

templater: inline global 'path' list in templatepaths

templater: introduce templatepaths for getting paths searched for templates Avoid function with different return types depending on parameters.

util: introduce datapath for getting the location of supporting data files templates, help and locale data is normally stored as sub folders in the directory containing the source of the mercurial module. In a frozen build they live as sub folders next to 'hg.exe' and 'library.zip'. These different kind of data were handled in different ways. Unify that by introducing util.datapath. The value is computed from the environment and is always used, so we just calculate the value on module load.

util: move _hgexecutable a few lines, closer to where it is used

hgk: define bookmark colour explicitly, as Tk 8.6 has changed their meaning

largefiles: remove 'forget' list that's always empty

bookmarks: fix divergent bookmark path normalization

exchange: remove a broken i18n abuse

bookmark: make the search for divergent names more robust We translate the "url we update from" and "the url in the config" into their canonical representation. This is useful for urls that have multiple equivalent forms: /foo/bar/ == file:/foo/bar/ == file:///foo/bar eg: hg pull --config path.bar=/foo/bar/ file:/foo/bar

pull: gather all bookmark-pulling code together Pulling bookmarks is done in two rounds. First we do a simple update, then we use the content of the `bookmark` argument to possibly overwrite some bookmark with their remote location. The second step was not done right after the first one for some obscure reason. We now perform them one after the other.

push: perform bookmark export in the push function This part is responsible for adding new bookmarks on the remote. Before that, it was done on its own in `commands.push`. The export is still not integrated with the rest of the push process, but at least it now dwells in the right function.

push: add `pushoperation.bkresult` This attribute will be used to carry the result of the bookmark push (when the `push` function will effectively be doing any bookmarks pushes)

push: pass list of bookmark to `exchange.push` Currently stored but not unused. This parameter will control bookmarks explicitly pushed (added to the server if missing).

exchange: import bookmarks as bookmod Using the original names makes it difficult to use `bookmarks` as a variable name.

push: sanitize handling of bookmark push return value Mixing return and assignment does not make sense, let's unify this.

locarepo: remove the `push` method (API) All the logic of this function is in the exchange.push function for some time. We just stop calling `localrepo.push` in `command.push` to have access to more information. Leaving `localrepo.push` in place will let third-party extensions wrap it but it would never be called by `hg push` making the wrapping useless. Therefore, the method is removed so that third-party code fail noisily and get properly upgraded.

push: `exchange.push` instead of `localrepo.push` The latter is going away.

clone: use `exchange.push` instead of `localrepo.push` The latter is going away.

push: use `exchange.push` in `commands.push` To gain access to all results from the push, we need to have access to the `pushoperation` object. We call `exchange.push` to do so. It is impossible to just change the `localrepo.push` signature because the change may be too subtle to be caught by external extension wrapping `localrepo.push`. This mean we'll have to kill `localrepo.push` because just using `exchange.push` in `commands.py` would silently disable all wrapping around `localrepo.push` by third-party extensions. So we'll remove it in a later changeset to get such extensions to fail noisily.

push: `exchange.push` now returns the `pushoperation` object Returning the pushop object gives access to more information (upcoming bookmark push result for example). `localrepo.push` currently extracts the `cgresult` for callers.

push: rename `pushop.ret` to `pushop.cgresult` We are about to introduce more results-related attributes on pushop (for bookmarks) so we need a more distinctive name. We now use `cgresult` as `pulloperation` does.

obsolete: use version constants in the format mapping

obsolete: use the `version` argument in encodemarkers Recent scientific studies show that assigning a variable have no effect on a unrelated constant. We therefore use the variable where we intended to in the first place.

obsolete: gather all contents related to format version 0 in a single place All contents includes documentation, constants, and functions, so we gather all of those things into a single location. The diff is confusing because it cannot understand what code is semantically moved around in this grand migration.

revert: properly back up added files with local modification These files were previously not backed up because the backup mechanism was not smart enough. This leads to data lose for the user since uncommitted contents were discarded. We now properly move the modified version to <filename>.orig before deleting it. We have to use a small hack to do a different action if "--no-backup" is specified. This is needed because the backup process is actually a move (not a copy) so the file is already missing when we backup. The internet kitten is a bit disapointed about that, but such is life. This patch concludes the "lets refactor revert" phases. We can now open the "Lets find stupid bug with renames and merge" phases. I'm sure that now that the code is clearer we could do it in another simpler way, but I consider the current improvement good enough for now.

revert: track added files with local modifications Those files need to be backed up but are currently not. We compute the set of them to be able to use a different backup strategy in the next changeset.

revert: distinguish between "check" and "backup" strategy "check" behaves as backup did before. We check if the current file differs from destination and we create a backup if it does. This is used for untracked files that will be overwritten by formerly-deleted files. We have to do the manual check since no status output can provide the content comparison. "backup" is now doing unconditional backup. This can be used for files seen as modified compared to both the target and the working directory. In such a case, we know that the file differs from target without actually comparing any content. This new "backup" strategy will be especially useful in the case of files added between the target and the working directory -parent- with additional modifications in the working directory -itself-. In that case we know we need to back it up, but we cannot run the content check as the files does not exists in target.

revert: small refactoring in the way backup value are handled The current backup value may have two different values: 1. Do not try to do backup 2. Do backup if applicable We are about to move to: 1. Do not try to do backup 2. Do backup if applicable 3. Do backup in all cases So we change the current values to make room for the new one.

merge with stable

Added signature for changeset f768c888aaa6

Added tag 3.1.2 for changeset f768c888aaa6

parsers: fix Py2.4 argument parsing issue Since fa53d66b45a8, we were getting this strange message with Py2.4: TypeError: argument 1 must be impossible<bad format char>, not int ..because we were using the 'n' type specifier introduced in 2.5. It turns out that offset is actually a revision number index, which ought to be an int anyway. So we store it in an int, use the 'i' specifier, rely on Py_ParseTuple for range checking, and rename it to avoid type confusion.

merge with i18n

diff: document the nobinary option Since 3fbef7ac26f0, we have a diff.nobinary option. This is handy, but the only way I found out about it was by looking at the release notes for 3.1, which is not something I normally do.

i18n-pt_BR: minor fixes and rewording on histedit help text

i18n-pt_BR: synchronized with c712238c4f9b

merge with i18n

i18n-pt_BR: synchronized with 802dffd62de5

filelog: censored files compare against empty data, have 0 size To support "status" operations against working directories that are the children of censored revisions, filelog must define "cmp" and "size" for censored content.

filelog: raise CensoredNodeError when hash checks fail with censor metadata With this change, when a revlog revision hash does not match its content, and the content is empty with a special metadata key, the integrity failure is assumed to be intentionally caused to remove sensitive content from repository history. To allow different Mercurial functionality to handle this scenario differently a more specific exception is raised than "ordinary" hash failures. Alternatives to this approach include, but are not limited to: - Calling a hook when hashes mismatch to allow arbitrary tombstone validation. Cons: Irresponsibly easy to disable integrity checking altogether. - Returning empty revision data eagerly instead of raising, masking the error. Cons: Push/pull won't roundtrip the tombstone, so client repos are unusable. - Doing nothing differently at this layer. Callers must do their own detection of tombstoned data if they want to handle some hash checks and not others. - Impacts dozens of callsites, many of which don't have the revision data - Would probably be missing one or two callsites at any given time - Currently we throw a RevlogError, as do 12 other places in revlog.py. Callers would need to parse the exception message and/or ensure RevlogError is not thrown from any other part of their call tree.

error: add CensoredNodeError, will be thrown when content deliberately erased This change introduces the error plus a corresponding catch in dispatch, to provide localized error messages. The verb "censor" is used in this commit and all following to refer to erasing the content of a revlog revision (filelog, for now) without recalculating node IDs, leaving that revision invalid. Further work must be done to safely share such revision data with compliant clients. I find the analogy to censorship straightforward; for less politically charged options, consider "erase", "excise", "expunge", or "blackhole".

files: cache repo.dirstate For a large repo, 'hg files' goes from 2.27 seconds to 1.92.

files: only check for removed, not unknown or missing ctx.matches() doesn't return unknown files, and repo.dirstate[f] never returns '!' for an answer.