Mathias De Maré <mathias.demare@gmail.com> [Mon, 09 Mar 2015 22:14:09 +0100] rev 24256
subrepo: add status support for ignored and clean files in git subrepos
Mike Edgar <adgar@google.com> [Wed, 14 Jan 2015 15:16:08 -0500] rev 24255
revlog: addgroup checks if incoming deltas add censored revs, sets flag bit
A censored revision stored in a revlog should have the censored revlog index
flag bit set. This implies we must know if a revision is censored before we
add it to the revlog. When adding revisions from exchanged deltas, we would
prefer to determine this flag without decoding every single full text.
This change introduces a heuristic based on assumptions around the Mercurial
delta format and filelog metadata. Since deltas which produce a censored
revision must be full-replacement deltas, we can read the delta's first bytes
to check the filelog metadata. Since "censored" is the alphabetically first
filelog metadata key, censored filelog revisions have a well-known prefix we
can look for.
For more on the design and background of the censorship feature, see:
http://mercurial.selenic.com/wiki/CensorPlan
Siddharth Agarwal <sid0@fb.com> [Fri, 06 Mar 2015 22:43:47 -0800] rev 24254
patch.internalpatch: accept a prefix parameter
Siddharth Agarwal <sid0@fb.com> [Fri, 06 Mar 2015 22:27:41 -0800] rev 24253
patch.patchbackend: accept a prefix parameter
Mike Edgar <adgar@google.com> [Tue, 10 Mar 2015 16:25:10 -0400] rev 24252
repair: define explicit local variable, don't reuse a comprehension variable
The node ID used in strip bundle names is currently taken as the last
iterated value in a list comprehension found much earlier in the function.
This change makes the node selection more explicit at the cost of redundancy.
Gregory Szorc <gregory.szorc@gmail.com> [Sat, 07 Feb 2015 12:49:30 -0800] rev 24251
commands.paths: use ui.paths to show paths
We now have an API for representing a collection of paths. Use it.
Gregory Szorc <gregory.szorc@gmail.com> [Sat, 07 Feb 2015 12:42:10 -0800] rev 24250
ui: represent paths as classes
Many have long wanted for paths to have expanded functionality and
flexibility.
In order to make that transition possible, we need to start
representing paths as something more than simple strings.
This patch introduces two classes:
1) "path" for representing a single path instance
2) "paths" for representing a collection of "paths"
Since we don't like patches that introduce new code without any
consumers, we convert ui.expandpath() to use the new APIs internally.
Upcoming patches will start exposing "path" instances to consumers
that currently interface with string paths.
The new "paths" attribute of ui is populated from config data the first
time it is accessed. Since it isn't updated when the configs are
modified, this could lead to some inaccurate caching behavior. It
shouldn't be an issue, as paths information is typically not accessed
until command dispatch, which occurs after the repository config
and extensions have been loaded. Time will tell if we need to refresh
paths information when the underlying config changes.
Jordi Gutiérrez Hermoso <jordigh@octave.org> [Tue, 10 Mar 2015 13:40:14 -0400] rev 24249
color: omit terminfo/win32 warning if non-interactive (
issue4543)
It's pretty annoying to be getting this warning when already the
colour extension has no hope of working. If there isn't a human on the
other end to to see the colours, there probably isn't a human either
who cares about this warning. More likely, some script somewhere is
gonna get confused with the warning output.
Of course, if we still want to see the warning for some reason, we can
always set --config ui.interactive=True.
Yuya Nishihara <yuya@tcha.org> [Thu, 26 Feb 2015 20:54:05 +0900] rev 24248
incoming: hide help about use of --bundle option by default
Pulling from incoming bundle can cause trouble such as missing phase movement,
bookmarks and largefiles transfer. Average user won't need this option.
Siddharth Agarwal <sid0@fb.com> [Fri, 06 Mar 2015 22:24:49 -0800] rev 24247
patch.applydiff: accept a prefix parameter
This is preparation for upcoming patches that will add support for applying a
patch within a subdirectory.
Siddharth Agarwal <sid0@fb.com> [Fri, 06 Mar 2015 22:22:14 -0800] rev 24246
patch._applydiff: accept a prefix parameter
This is preparation for upcoming patches that will add support for applying a
patch within a subdirectory.
We normalize the prefix here because this is the main driver -- all code to
apply patches is expected to go through here.
Siddharth Agarwal <sid0@fb.com> [Fri, 06 Mar 2015 22:19:26 -0800] rev 24245
patch.makepatchmeta: accept a prefix parameter
This is preparation for upcoming patches that will add support for applying a
patch within a subdirectory.
Siddharth Agarwal <sid0@fb.com> [Fri, 06 Mar 2015 22:17:24 -0800] rev 24244
patch.pathtransform: add a prefix parameter
This is preparation for upcoming patches that will add support for applying a
patch within a subdirectory.
The prefix is applied after path components are stripped.
Siddharth Agarwal <sid0@fb.com> [Fri, 06 Mar 2015 21:48:40 -0800] rev 24243
patch.pathtransform: add doctests
In upcoming patches we're going to make this function more complex, so add some
unit tests for it.
Siddharth Agarwal <sid0@fb.com> [Fri, 06 Mar 2015 21:12:30 -0800] rev 24242
patch: rename pathstrip to pathtransform
In upcoming patches we'll not just strip path components but also add new ones.
Yuya Nishihara <yuya@tcha.org> [Wed, 18 Feb 2015 23:17:52 +0900] rev 24241
templatekw: forward _hybrid.get to raw values so that get(extras, key) works
ef78450c8df6 implies that the primary goal is to allow "{get(extras, key)}",
but it didn't work.
I'm not sure if _hybrid should forward all unknown attributes to values, so
only "get" is forwarded for now.
Yuya Nishihara <yuya@tcha.org> [Wed, 18 Feb 2015 23:01:33 +0900] rev 24240
templater: implement _hybrid.__contains__ so that ifcontains can accept dict
d8fb835376d1 is fine for "{revset()}", but "i.values()[0]" does not work if
each item has more than one values such as "{bookmarks}".
This fixes the problem by using list.__contains__ or dict.__contains__
appropriately.
Yuya Nishihara <yuya@tcha.org> [Sun, 08 Mar 2015 14:46:42 +0900] rev 24239
templatekw: keep raw list or dict in _hybrid object
This will allow us to handle bookmarks, extras and copies properly in
"ifcontains()" and "get()".
Yuya Nishihara <yuya@tcha.org> [Sun, 08 Mar 2015 14:38:50 +0900] rev 24238
templatekw: give name to lambda that constructs variables map of templater
The constructed list is useless for "ifcontains()" and "get()". Instead,
makemap() and raw dict will be passed to _hybrid object.
Yuya Nishihara <yuya@tcha.org> [Sun, 08 Mar 2015 14:17:35 +0900] rev 24237
templatekw: convert list of key/value pairs to sortdict
These sortdict objects will be passed to _hybrid later, which will allow
us to handle them by "ifcontains()" and "get()" as expected.
Yuya Nishihara <yuya@tcha.org> [Wed, 18 Feb 2015 22:53:53 +0900] rev 24236
sortdict: have update() accept either dict or iterable of key/value pairs
Future patches will make the templater store a sorted dict in the _hybrid object.
sortdict should be constructed from a sorted list.
Laurent Charignon <lcharignon@fb.com> [Fri, 06 Mar 2015 15:57:43 -0800] rev 24235
record: allow editing new files (
issue4304)
While using the record extension to select changes, the user couldn't see the
content of newly added files and had to select/reject them based on filename.
The test is changed accordingly in two places.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 05 Mar 2015 14:42:25 -0800] rev 24234
localrepo: back out changeset
b08af8f0ac01
Running the tags function filtered will lead to different results with different
filter levels. This seems too dangerous to be done blindly as
b08af8f0ac01 did.
Tristan Seligmann <mithrandi@debian.org> [Mon, 09 Mar 2015 12:32:29 -0400] rev 24233
test-shelve: be more lenient about whitespace (
issue4124)
When running on a slower systems (eg. MIPS buildd), the age of the
shelf can be 10 seconds or more, resulting in the output alignment
changing and thus a test failure. This patch makes the spacing be
matched more leniently.
Anton Shestakov <engored@ya.ru> [Mon, 09 Mar 2015 14:32:17 +0800] rev 24232
histedit: use better meta-variable names than VALUE in help text
Before this change hg help histedit would use the default variable label:
--commands VALUE
...
-r --rev VALUE [+]
With this change the text will be in the usual help text style and a bit more
explanatory:
--commands FILE
...
-r --rev REV [+]
Anton Shestakov <engored@ya.ru> [Mon, 09 Mar 2015 14:10:42 +0800] rev 24231
histedit: tweak --commands help text
The rest of help messages for command arguments are simple phrases without any
ending punctuation, so having this text be a complete sentence didn't really
fit.
Matt Harbison <matt_harbison@yahoo.com> [Sun, 25 Jan 2015 02:45:49 -0500] rev 24230
largefiles: report the source of copied/moved largefiles in status -C
Previously, the source was silently skipped because the largefile was in the
list of changed files, but the standin was in the copies dictionary. The source
is only displayed if the changed file is a key in the copies dictionary.
Matt Harbison <matt_harbison@yahoo.com> [Sun, 08 Mar 2015 00:04:03 -0500] rev 24229
test-commit-amend: add globs for Windows
Augie Fackler <augie@google.com> [Fri, 30 Jan 2015 21:30:40 -0800] rev 24228
lazymanifest: use a binary search to do an insertion
This makes insertions log(n) plus some memmove() overhead, rather than
doing an append followed by an n*log(n) sort. There's probably a lot
of performance to be gained by adding a batch-add method, which could
be smarter about the memmove()s performed.
Includes a couple of extra tests that should help prevent bugs.
Thanks to Martin for some significant pre-mail cleanup of this change.
Augie Fackler <augie@google.com> [Mon, 17 Nov 2014 00:00:25 -0500] rev 24227
context: don't sort manifest entries
The manifest iterator is now pre-sorted, so we can skip this check.
Augie Fackler <augie@google.com> [Fri, 06 Mar 2015 21:29:47 -0500] rev 24226
manifest: use custom C implementation of lazymanifest
This version is actually lazy, unlike the pure-python version. The
latter could stand to be optimized if anyone actually wants to use it
seriously. I put no work into it.
Before any of my related changes on mozilla-central:
perfmanifest tip
! wall 0.268805 comb 0.260000 user 0.260000 sys 0.000000 (best of 37)
perftags
! result: 162
! wall 0.007099 comb 0.000000 user 0.000000 sys 0.000000 (best of 401)
perfstatus
! wall 0.415680 comb 0.420000 user 0.260000 sys 0.160000 (best of 24)
hgperf export tip
! wall 0.142118 comb 0.140000 user 0.140000 sys 0.000000 (best of 67)
after all of my changes on mozilla-central:
./hg:
perfmanifest tip
! wall 0.232640 comb 0.230000 user 0.220000 sys 0.010000 (best of 43)
perftags
! result: 162
! wall 0.007057 comb 0.010000 user 0.000000 sys 0.010000 (best of 395)
perfstatus
! wall 0.415503 comb 0.420000 user 0.280000 sys 0.140000 (best of 24)
hgperf export tip
! wall 0.025096 comb 0.030000 user 0.030000 sys 0.000000 (best of 102)
so it's no real change in performance on perf{manifest,tags,status},
but is a huge win on 'hgperf export tip'.
There's a little performance work that could still be done here:
fastdelta() could be done significantly more intelligently by using
the internal state of the lazymanifest type in C, but that seems like
good future work.
Augie Fackler <augie@google.com> [Sat, 07 Mar 2015 12:04:39 -0500] rev 24225
manifest: split manifestdict into high-level and low-level logic
The low-level logic type (_lazymanifest) matches the behavior of the C
implementation introduced in
a5f1bccd. A future patch will use that
when available.
Augie Fackler <augie@google.com> [Sat, 07 Mar 2015 11:43:12 -0500] rev 24224
manifest: do parsing inside manifestdict contstructor
This shape to the code will make using a C implementation of the
manifest storage easier.
Augie Fackler <augie@google.com> [Sat, 07 Mar 2015 11:42:05 -0500] rev 24223
manifest: move parsing functions up in file
These functions are about to change signature and be hidden inside the
manifestdict constructor. Doing the code motion now as an isolated
change to make things easier to review.
Augie Fackler <augie@google.com> [Tue, 10 Feb 2015 15:59:12 -0500] rev 24222
dispatch: offer suggestions of similar-named commands
When suggestions are available, we show those suggestions instead of
showing some help output.
Augie Fackler <augie@google.com> [Mon, 26 Jan 2015 15:43:13 -0500] rev 24221
dispatch: offer near-edit-distance suggestions for {file,rev}set functions
Before this patch, when I have a brain fart and type `hg log -r
'add(foo)'`, hg exits and just says add isn't a function, leading me
to the help page for revset to figure out how to spell the
function. With this patch, it suggests 'adds' as a function I might
have meant.
Augie Fackler <augie@google.com> [Mon, 26 Jan 2015 15:52:46 -0500] rev 24220
test-revset: add tests for missing function output
An upcoming change will slightly alter behavior here. Adding the test
now so the output change stands out in the later changeset.
Augie Fackler <augie@google.com> [Mon, 26 Jan 2015 14:32:30 -0500] rev 24219
revset: use UnknownIdentifier where appropriate
Augie Fackler <augie@google.com> [Mon, 26 Jan 2015 14:31:48 -0500] rev 24218
fileset: use UnknownIdentifier where appropriate
Augie Fackler <augie@google.com> [Mon, 26 Jan 2015 14:31:01 -0500] rev 24217
error: add a new UnknownIdentifier error type
This will be used by the revset and fileset code to communicate more
specific errors to higher levels so that we might be able to offer
suggestions about what function might have been similar.
Jordi Gutiérrez Hermoso <jordigh@octave.org> [Mon, 24 Nov 2014 16:42:49 -0500] rev 24216
log: display closing-branch nodes as "_" (BC)
In plain `hg log` there is no indication that a commit closes a
branch. You can use hg log --debug, but this is too verbose. A simple
idea copied from thg and other graphical viewers is to display the
node for a closing-branch commit as a horizontal line.
I think this technically is a BC if we consider the graphlog to be
part of the stdout API, but I really can't imagine who the hell is
parsing the graphlog to determine information about commits.
Matt Mackall <mpm@selenic.com> [Fri, 06 Mar 2015 17:00:42 -0600] rev 24215
manifest: move pure parsing code out of pure
This lets us transition more smoothly.
Augie Fackler <augie@google.com> [Tue, 13 Jan 2015 14:31:38 -0800] rev 24214
manifest.c: new extension code to lazily parse manifests
This lets us iterate manifests in order, but do a _lot_ less work in
the common case when we only care about a few manifest entries.
Many thanks to Mike Edgar for reviewing this in advance of it going
out to the list, which caught many things I missed.
This version of the patch includes C89 fixes from Sean Farley and
many correctness/efficiency cleanups from Martin von
Zweigbergk. Thanks to both!
Durham Goode <durham@fb.com> [Thu, 05 Mar 2015 22:16:28 -0800] rev 24213
workingctx: use normal dirs() instead of dirstate.dirs()
The workingctx class was using dirstate.dirs() as it's implementation. The
sparse extension maintains a pruned down version of the dirstate, so this
resulted in the workingctx reporting an incorrect listing of directories
during merge calculations (it was detecting directory renames when it
shouldn't have).
The fix is to use the default implementation, which uses workingctx._manifest,
which unions the manifest with the dirstate to produce the correct overall
picture. This also produces more accurate output since it will no longer
return directories that have been entirely deleted in the dirstate.
Tests will be added to the sparse extension to detect regressions for this.
Matt Mackall <mpm@selenic.com> [Thu, 05 Mar 2015 15:52:07 -0600] rev 24212
merge with stable
Matt Harbison <matt_harbison@yahoo.com> [Tue, 03 Mar 2015 21:31:16 -0500] rev 24211
subrepo: only fetch unknown files from git when explicitly requested
Matt Harbison <matt_harbison@yahoo.com> [Tue, 03 Mar 2015 21:24:16 -0500] rev 24210
subrepo: always return scmutil.status() from gitsubrepo.status()
This was accidentally left out of
c95db3208a33.
Matt Harbison <matt_harbison@yahoo.com> [Tue, 03 Mar 2015 21:17:29 -0500] rev 24209
subrepo: explicitly request clean and unknown files in status for git's add
No behavior changes here since gitsubrepo.status() doesn't currently populate
clean, and ignores whether unknown files were actually requested. But this is
in line with other calls to status, and should avoid future surprises.
Matt Harbison <matt_harbison@yahoo.com> [Sun, 01 Mar 2015 18:35:29 -0500] rev 24208
largefiles: handle logging from outside the repo
It's probably possible to refactor so that the 'if m._cwd' check isn't
necessary, but the False case is the typical case (i.e. run from the root of the
repo), and simpler to read.
An exact path to a largefile from outside the repo was previously ignored.
match.rel('.hglf') will handle figuring out both the correct '../' length to the
standin directory if inside the repo, or path/to/repo from outside, at the cost
of a pconvert() to keep the patterns using '/' on Windows.
Matt Harbison <matt_harbison@yahoo.com> [Sun, 01 Mar 2015 14:21:54 -0500] rev 24207
largefiles: don't prefix standin patterns with '.hglf' when logging
When logging '.hglf/foo', the pattern list was being transformed from
['.hglf/foo'] into ['.hglf/foo', '.hglf/.hglf/foo']. Aside from the
pathological case of somebody getting a directory named '.hglf' created inside
the standing directory, the old code shouldn't have had any bad effects.
(amended by mpm to sort patterns for test stability and not upset check-code)
Matt Harbison <matt_harbison@yahoo.com> [Sat, 28 Feb 2015 23:42:38 -0500] rev 24206
largefiles: teach log to handle patterns
Adding the standin to the patterns list was (possibly) harmless before, but was
wrong, because the pattern list was already updated above that code. Now that
patterns are handled, it was actually harmful. For example, in this test:
$ hg log -G glob:**another*
the adjusted pattern list would have been:
['glob:**another*', '.hglf/.', 'glob:.hglf/**another*']
which causes every largefile in the root to be matched.
I'm not sure why 'glob:a*' picks up the rename of a -> b commit in test-log.t,
but a simple 'a' doesn't. But it doesn't appear to be caused by the largefiles
extension.
Matt Mackall <mpm@selenic.com> [Thu, 05 Mar 2015 13:21:57 -0600] rev 24205
check-code: allow disabling msys path check
Yuya Nishihara <yuya@tcha.org> [Thu, 08 Jan 2015 23:05:45 +0900] rev 24204
revset: extend fullreposet to make "null" revision magically appears in set
As per fullreposet.__and__, it can omit the range check of rev. Therefore,
"null" revision is accepted automagically.
It seems this can fix many query results involving null symbol. Originally,
the simplest "(null)" query did fail if there were hidden revisions. Tests
are randomly chosen.
fullreposet mimics the behavior of localrepo, where "null" revision is not
listed but contained.
Yuya Nishihara <yuya@tcha.org> [Sat, 10 Jan 2015 18:09:25 +0900] rev 24203
revset: duplicate spanset.__contains__ to fullreposet for modification
1d7a2771aa36 says we should avoid function calls in __contains__, so
super(fullreposet, self).__contains__(rev) is not an option.
Actually the super call doubled the benchmark result of trivial query:
revisions:
0)
678f53865c68 (tip when I wrote this patch)
1) rev == node.nullrev or super(fullreposet, self).__contains__(rev)
revset #0: tip:0
0) wall 0.008441 comb 0.010000 user 0.010000 sys 0.000000 (best of 282)
1) wall 0.016152 comb 0.010000 user 0.010000 sys 0.000000 (best of 146)
Yuya Nishihara <yuya@tcha.org> [Sat, 10 Jan 2015 14:49:50 +0900] rev 24202
revset: have all() filter out null revision
I'm not sure if "all()" should filter out "null", but "all()" is stated as
'the same as "0:tip"' (except that it doesn't reorder the subset, I think.)
This patch is intended to avoid exposing a fullreposet to graphmod.dagwalker(),
which would result in strange drawing in future version:
|
o changeset: 0:
f8035bb17114
| user: test
| date: Thu Jan 01 00:00:00 1970 +0000
| summary: add a
caused by:
parents = sorted(set([p.rev() for p in ctx.parents()
if p.rev() in revs]))
We cannot add "and p.rev() != nullrev" here because revs may actually include
"null" revision.
Yuya Nishihara <yuya@tcha.org> [Sat, 10 Jan 2015 16:41:36 +0900] rev 24201
revset: drop unnecessary calls of getall() with empty argument
If x is None, getall(repo, subset, x) == subset.
Yuya Nishihara <yuya@tcha.org> [Wed, 04 Mar 2015 21:47:07 +0900] rev 24200
graphlog: do not bypass commands.log so that -fr works
Since
8b4b9ee6001a, opts dict can be modified in commands.log() before calling
cmdutil.graphlog().
Mateusz Kwapich <mitrandir@fb.com> [Wed, 21 Jan 2015 14:45:24 -0800] rev 24199
histedit: add a config allowing changing histedit rule line length limit
Since many users are using terminals wider than 80 chars there should be an
option to have longer lines in histedit editor.
Even if the summary line is shorter than 80 chars after adding action line
prefixes (like "pick
7c2fd3b9020c") it doesn't fit there anymore. Setting
it to for example 110 would be a nice option to have.
Yuya Nishihara <yuya@tcha.org> [Fri, 06 Mar 2015 00:14:22 +0900] rev 24198
dirstate: make sure rootdir ends with directory separator (
issue4557)
ntpath.join() of Python 2.7.9 does not work as expected if root is a UNC path
to top of share.
This patch doesn't take care of os.altsep, '/' on Windows, because root should
be normalized by realpath().
Alexander Becher <Alexander.Becher@RuD-Steuerungstechnik.De> [Wed, 04 Mar 2015 17:24:12 +0100] rev 24197
i18n-de: fix a typo in the german translation
Matt Mackall <mpm@selenic.com> [Tue, 03 Mar 2015 17:28:05 -0600] rev 24196
histedit: fix style of new error message
- lowercase
- no punctuation
- brief
- short node
Augie Fackler <augie@google.com> [Wed, 04 Feb 2015 15:17:13 -0500] rev 24195
Makefile: allow setting HGTESTFLAGS in shell environment for TESTFLAGS
I keep wanting to run 'make tests', but I forget to set TESTFLAGS='-j
16' or whatever is reasonable for my machine. This lets me just set it
once in my shell settings and forget it.
Augie Fackler <augie@google.com> [Wed, 04 Feb 2015 12:26:16 -0500] rev 24194
Makefile: introduce testpy-% target for testing with a specifc Python
This makes it easy to do 'make testpy-2.4.6 TESTFLAGS="-j 16"' and the
Makefile will build Python if needed and then run tests (with -j 16)
with the resulting Python.
You can set the environment variable HGPYTHONS to a nice location on
your machine to cache the Python builds globally. If that's not set,
it builds them inside build/pythons.
Jordi Gutiérrez Hermoso <jordigh@octave.org> [Fri, 27 Feb 2015 17:35:07 -0500] rev 24193
extdiff: expand tildes and variables in paths to user-supplied diff programs
Joan Massich <mailsik@gmail.com> [Sun, 22 Feb 2015 15:40:36 +0100] rev 24192
setup.py: do not install c extensions on pypy
These extensions are slower on pypy because pypy has a JIT compiler.
And also, they often do not compile (it depends on the pypy configuration).
Jesus Cea <jcea@jcea.es> [Mon, 02 Mar 2015 14:52:04 +0100] rev 24191
copyright: update to 2015
Many files and translations have an outdated copyright date.
Change that to the correct "2005-2015" dates.
Mike Edgar <adgar@google.com> [Wed, 21 Jan 2015 22:09:32 -0500] rev 24190
changegroup: emit full-replacement deltas if either revision is censored
To ensure that exchanged deltas in the presence of censored revisions can
always be applied to the recipient repository, the deltas must replace the
entire base text. To make this restriction reasonably enforceable, the delta
must do so with a single patch operation.
For background and broader design of the censorship feature, see:
http://mercurial.selenic.com/wiki/CensorPlan
Durham Goode <durham@fb.com> [Fri, 06 Feb 2015 11:04:55 -0800] rev 24189
log: make -fr show complete history from the given revs
Right now it's very obtuse to show the history of a particular rev (hg log -r
'reverse(::foo)'). This changes the -f option to make it follow history for the
revs specified by -r.
The current -f -r behavior is to limit the result of -r to only the
commits that are ancestors of the current working copy. Changing this
is a bit of a BC break, but the old behavior is A) rare, B) easy to
emulate (& ::.), and C) currently undefined. The new behavior is
frequently requested enough that I think the change is worth it.
André Klitzing <aklitzing@gmail.com> [Tue, 24 Feb 2015 14:12:13 +0100] rev 24188
util: accept "now, today, yesterday" for dates even the locale is not english
Hi there!
Fixed date names are helpful for automated systems. So it is possible to
use english date parameter even if the underlying system uses another
locale.
We have here a jenkins with build jobs on different slaves that will do
some operations with "dates" parameter. Some systems uses English locale
and some systems uses German locale. So we needed to configure the job to
uses other date names.
As this is really annoying to keep the systems locale in mind for some
operations I looked into util.py. It would be helpful for automated systems
if the "default English" date names would even usable on other
locales.
I attached a simple patch for this.
Best regards
André Klitzing
Martin von Zweigbergk <martinvonz@google.com> [Fri, 27 Feb 2015 14:26:22 -0800] rev 24187
copies: only calculate 'addedinm[12]' sets once
Pass the addedinm1 and addedinm2 instead of m1, m2, ma into
_computenonoverlap() instead of calculating the sets twice.
Martin von Zweigbergk <martinvonz@google.com> [Fri, 27 Feb 2015 14:03:01 -0800] rev 24186
copies: calculate 'bothnew' from manifestdict.filesnotin()
In the same spirit as the previous change, let's now calculate the
'bothnew' variable using manifestdict.filesnotin().5D
Martin von Zweigbergk <martinvonz@google.com> [Fri, 27 Feb 2015 14:02:30 -0800] rev 24185
copies: replace _nonoverlap() by calls to manifestdict.filesnotin()
Now that we have manifestdict.filesnotin(), we can write _nonoverlap()
in terms of that method instead, enabling future speedups when
filesnotin() gets optimized, and perhaps making the code a little
clearer at the same time.
Martin von Zweigbergk <martinvonz@google.com> [Fri, 27 Feb 2015 13:57:37 -0800] rev 24184
copies: move code into new manifestdict.filesnotin() method
copies._computeforwardmissing() finds files in one context that is not
in the other. Let's move this code into a new method on manifestdict,
so m1.filesnotin(m2) can be optimized for various types of manifests
(we expect more types of manifests soon).
Matt Harbison <matt_harbison@yahoo.com> [Fri, 27 Feb 2015 23:30:42 -0500] rev 24183
subrepo: warn when adding already tracked files in gitsubrepo
This follows normal Mercurial rules, and the message is lifted from
workingctx.add(). The file is printed with abs() to be consistent with how it
is printed in workingctx, even though that is inconsistent with how added files
are printed in verbose mode. Further, the 'already tracked' notifications come
after all of the files that are added are printed, like in Mercurial.
As a side effect, we now have the reject list to return to the caller, so that
'hg add' exits with the proper code. It looks like an abort occurs if git fails
to add the file. Prior to touching 'snake.python' in the test, this was the
result of attempting to add the file after a 'git rm':
fatal: pathspec 'snake.python' did not match any files
abort: git add error 128 in s (in subrepo s)
I'm not sure what happens when git is a deep subrepo, but the 'in s' and
'in subrepo s' from @annotatesubrepoerror are redundant here. Maybe we should
stat the files before invoking git to catch this case and print out the prettier
hg message? The other thing missing from workingctx.add() is the call to
scmutil.checkportable(), but that would need to borrow the parent's ui object.
Matt Harbison <matt_harbison@yahoo.com> [Thu, 26 Feb 2015 15:53:54 -0500] rev 24182
subrepo: don't exclude files in .hgignore when adding to git
The previous test gave a false success because only an hg-ignored pattern was
specified. Therefore match.files() was empty, and it fell back to the files
unknown to git. The simplest fix is to always consider what is unknown to git,
as well as anything specified explicitly. Files that are ignored by git can
only be introduced by an explicit mention in match.files().
Mads Kiilerich <madski@unity3d.com> [Wed, 14 Jan 2015 01:15:26 +0100] rev 24181
dirstate: clarify comment about leaving normal files undef if changed 'now'
Clarify that they only are saved as undef if they were marked as normal and
changed in the same second.
Mads Kiilerich <madski@unity3d.com> [Sun, 18 Jan 2015 02:38:57 +0100] rev 24180
spelling: fixes from proofreading of spell checker issues
Mads Kiilerich <madski@unity3d.com> [Fri, 27 Feb 2015 21:42:58 +0100] rev 24179
merge-tools: configuration for Beyond Compare on OS X
Based on the Linux configuration entry.
Mads Kiilerich <madski@unity3d.com> [Wed, 21 Jan 2015 00:02:17 +0100] rev 24178
convert: when converting from monotone, use the number 1 for close in extras
Monotone used '1' for close while core Mercurial use 1. Now, for consistency,
use the same value everywhere. It will be stored as a string anyway and the
change will not make any real difference.
(The actual value of 'close' doesn't matter as long as extras has such a key.)
Gregory Szorc <gregory.szorc@gmail.com> [Mon, 02 Mar 2015 15:07:18 -0800] rev 24177
hgweb: extract changeset template mapping generation to own function
Similar in spirit to
513d47905114, I want to write an extension to
make available extra template keywords so hgweb templates can include
extra data.
To do this today requires monkeypatching the templater, which I think is
the wrong place to perform this modification.
This patch extracts the creation of the templater arguments to a
standalone function - one that can be monkeypatched by extensions.
I would very much like for extensions to be able to inject extra
templater parameters into *any* template. However, I'm not sure the best
way to facilitate this, as hgweb commands invoke the templater before
returning and we want the extensions to have access to rich data
structures like the context instances. We need cooperation inside hgweb
command functions. The use case screams for something like internal-only
"hooks." This is exactly what my (rejected) "events" patch series
provided. Perhaps that feature should be reconsidered...
Matt Mackall <mpm@selenic.com> [Mon, 02 Mar 2015 17:32:37 -0600] rev 24176
merge with stable
Jordi Gutiérrez Hermoso <jordigh@octave.org> [Wed, 25 Feb 2015 18:12:01 -0500] rev 24175
revrange: don't parse revset aliases as hash prefixes (
issue4553)
If a user has a revsetalias defined, it is their explicit wish for
this alias to be parsed as a revset and nothing else. Although the
case of the alias being short enough and only contain the letters a-f
is probably kind of rare, it may still happen.
Mathias De Maré <mathias.demare@gmail.com> [Tue, 24 Feb 2015 08:49:22 +0100] rev 24174
subrepos: support adding files in git subrepos
This support includes correct matching, so includes,
excludes and patterns are all supported.
Matt Harbison <matt_harbison@yahoo.com> [Sun, 15 Feb 2015 17:29:10 -0500] rev 24173
subrepo: return only the manifest keys from hgsubrepo.files()
This is in line with the other subrepo classes (i.e. only the filenames are
returned). Archive iterates over the manifest keys, and since subrepo archive()
uses this method, it does too now. This will allow largefiles to override its
manifest keys to present the largefiles instead of the standins. Once in place,
we shouldn't need the copy/paste overrides of archive and subrepo archive in
largefiles, that don't quite behave like the core methods they are overriding.
Matt Harbison <matt_harbison@yahoo.com> [Sun, 15 Feb 2015 17:21:48 -0500] rev 24172
archive: change the default prefix to '' from None
All current callers supply some sort of prefix, so the issue was hidden. But if
no parameter was specified, a crash occurred in the write() closure when
concatenating 'prefix' and 'name'.
Martin von Zweigbergk <martinvonz@google.com> [Wed, 25 Feb 2015 11:39:14 -0800] rev 24171
debugsetparent: document one common caveat specifically
After calling debugsetparent, it's quite common that status is
incorrect. The command's help text already says that it should be used
with care, but let's describe this caveat explicitly since it's
probably the most common one.
Eric Sumner <ericsumner@fb.com> [Fri, 20 Feb 2015 13:55:01 -0800] rev 24170
repair: setup hookargs when processing bundle2s
addchangegroup() modifies its behavior based on the transaction source.
This is incorrect for bundle2 repair files, causing rebases to abort when this
option is enabled.
This diff specifies the source type in the way recommended by comments in
bundle2.py and adds a test to ensure that rebases with the experimental option
work successfully.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 02 Mar 2015 19:01:00 +0000] rev 24169
amend: check for directory renames for both merge parents (
issue4516)
Before this change, amending a merge would lose the rename information for file
adding in the second parents and implicitly renamed into a new directory.
In case of the merge, we also look for directory rename data from the second
parent. This seems to fix the bug and does not show other issues from the test
suite.
Matt Mackall <mpm@selenic.com> [Mon, 02 Mar 2015 10:55:19 -0600] rev 24168
merge with stable
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 02 Mar 2015 23:37:55 +0900] rev 24167
largefiles: avoid infinite recursive call of openlfdirstate in overriderevert
When there isn't lfdirstate file in cases below, "openlfdirstate()"
call "scmutil.match()" indirectly to build lfdirstate up.
- subrepos disabling largefiles locally
- lfdirstate file is missed accidentally
This causes infinite recursive call of "openlfdirstate()" in
"overriderevert()" (introduced by
79c2c29c71ae), because
"openlfdirstate()" is invoked from the function overriding
"scmutil.match()" itself.
To avoid infinite recursive call of "openlfdirstate()" in
"overriderevert()" in such cases, this patch passes "create=False"
argument to "openlfdirstate()".
"create=False" forcibly makes "openlfdirstate()" avoid code path to
build lfdirstate up.
Matt Mackall <mpm@selenic.com> [Mon, 02 Mar 2015 10:29:45 -0600] rev 24166
Added signature for changeset
07a92bbd02e5
Matt Mackall <mpm@selenic.com> [Mon, 02 Mar 2015 10:29:41 -0600] rev 24165
Added tag 3.3.2 for changeset
07a92bbd02e5
Matt Harbison <matt_harbison@yahoo.com> [Mon, 02 Mar 2015 10:31:22 -0500] rev 24164
transaction: really disable hardlink backups (
issue4546)
Matt Mackall <mpm@selenic.com> [Mon, 02 Mar 2015 01:20:14 -0600] rev 24163
merge with stable
Matt Harbison <matt_harbison@yahoo.com> [Sat, 28 Feb 2015 01:12:54 -0500] rev 24162
test-obsolete: use 'log -T {node}' instead of 'id --debug -i' to lookup hash
I ran into a case when adding a test where there were cryptic hg command line
errors. I eventually traced it back to 'hg id' printing debug messages before
the hash:
invalid branchheads cache (served): tip differs <hash>
This method should eliminate any other output except the node.
Matt Mackall <mpm@selenic.com> [Mon, 02 Mar 2015 01:06:31 -0600] rev 24161
Added signature for changeset
5b4ed033390b
Matt Mackall <mpm@selenic.com> [Mon, 02 Mar 2015 01:06:27 -0600] rev 24160
Added tag 3.3.1 for changeset
5b4ed033390b
Mads Kiilerich <madski@unity3d.com> [Fri, 06 Feb 2015 02:52:10 +0100] rev 24159
revisionbranchcache: fall back to slow path if starting readonly (
issue4531)
Transitioning to Mercurial versions with revision branch cache could be slow as
long as all operations were readonly (revset queries) and the cache would be
populated but not written back.
Instead, fall back to using the consistently slow path when readonly and the
cache doesn't exist yet. That avoids the overhead of populating the cache
without writing it back.
If not readonly, it will still populate all missing entries initially. That
avoids repeated writing of the cache file with small updates, and it also makes
sure a fully populated cache available for the readonly operations.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Thu, 26 Feb 2015 06:03:39 +0900] rev 24158
largefiles: access to specific fields only if largefiles enabled (
issue4547)
Even if largefiles extension is enabled in a repository, "repo"
object, which isn't "largefiles.reposetup()"-ed, is passed to
overridden functions in the cases below unexpectedly, because
extensions are enabled for each repositories strictly.
(1) clone without -U:
(2) pull with -U:
(3) pull with --rebase:
combination of "enabled@src", "disabled@dst" and
"not-required@src" cause this situation.
largefiles requirement
@src @dst @src result
-------- -------- --------------- --------------------
enabled disabled not-required aborted unexpectedly
required requirement error (intentional)
-------- -------- --------------- --------------------
enabled enabled * success
-------- -------- --------------- --------------------
disabled enabled * success (only for "pull")
-------- -------- --------------- --------------------
disabled disabled not-required success
required requirement error (intentional)
-------- -------- --------------- --------------------
(4) update/revert with a subrepo disabling largefiles
In these cases, overridden functions cause accessing to largefiles
specific fields of not "largefiles.reposetup()"-ed "repo" object, and
execution is aborted.
- (1), (2), (4) cause accessing to "_lfstatuswriters" in
"getstatuswriter()" invoked via "updatelfiles()"
- (3) causes accessing to "_lfcommithooks" in "overriderebase()"
For safe accessing to these fields, this patch examines whether passed
"repo" object is "largefiles.reposetup()"-ed or not before accessing
to them.
This patch chooses examining existence of newly introduced
"_largefilesenabled" instead of "_lfcommithooks" and
"_lfstatuswriters" directly, because the former is better name for the
generic "largefiles is enabled in this repo" mark than the latter.
In the future, all other overridden functions should avoid largefiles
specific processing for efficiency, and "_largefilesenabled" is better
also for such purpose.
BTW, "lfstatus" can't be used for such purpose, because some code
paths set it forcibly regardless of existence of it in specified
"repo" object.
Yuya Nishihara <yuya@tcha.org> [Wed, 18 Feb 2015 22:17:35 +0900] rev 24157
templatekw: fix {join(bookmarks, sep)} to always show associated bookmarks
The default joinfmt, "x.values()[0]", can't be used here because it picks
either 'bookmark' or 'current' randomly.
I got wrong result with PYTHONHASHSEED=1 on my amd64 machine.
Yuya Nishihara <yuya@tcha.org> [Wed, 18 Feb 2015 22:10:17 +0900] rev 24156
templatekw: inline showlist() into showbookmarks()
showlist() is the helper to build _hybrid object from a trivial list. It can't
be applied if each value has more than one items, 'bookmark' and 'current' in
this case.
This change is necessary to fix random failure of "{join(bookmarks, sep)}".
Matt Mackall <mpm@selenic.com> [Mon, 02 Mar 2015 00:12:29 -0600] rev 24155
transaction: disable hardlink backups (
issue4546)
Causing troubles, simplest fix.
Matt Mackall <mpm@selenic.com> [Sun, 01 Mar 2015 23:20:02 -0600] rev 24154
repoview: invalidate cached changelog if _delayed changes (
issue4549)
Starting with
2d54aa5397cd, when a clone reached the checkout stage,
the cached changelog in the filtered view was still seeing the
_delayed flag, even though the changelog had already been finalized.
Sean Farley <sean.michael.farley@gmail.com> [Thu, 26 Feb 2015 10:23:04 -0800] rev 24153
test: make test-extdiff resilient to */gnubin/echo
My Mac test machine has 'echo' in '/opt/local/libexec/gnubin/echo' since, well,
GNU is not BSD.
Also, I feel it need to be said about using regexes:
Some people, when confronted with a problem, think "I know, I'll use regular
expressions." Now they have two problems.
Yuya Nishihara <yuya@tcha.org> [Thu, 26 Feb 2015 23:30:33 +0900] rev 24152
dispatch: work around UnicodeDecodeError caused by SSLError of Python 2.7.9
SSLError of Python 2.7.9 may keep error message in unicode. It will be
wrapped by URLError(reason) at KeepAliveHandler.do_open, so inst.reason can
be a unicode.
https://hg.python.org/cpython/file/v2.7.9/Modules/_ssl.c#l329
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Thu, 05 Feb 2015 14:45:49 +0900] rev 24151
revset: mask specific names for named() predicate
Before this patch, revset predicate "tag()" and "named('tags')" differ
from each other, because the former doesn't include "tip" but the
latter does.
For equivalence, "named('tags')" shouldn't include the revision
corresponded to "tip". But just removing "tip" from the "tags"
namespace causes breaking backward compatibility, even though "tip"
itself is planned to be eliminated, as mentioned below.
http://selenic.com/pipermail/mercurial-devel/2015-February/066157.html
To mask specific names ("tip" in this case) for "named()" predicate,
this patch introduces "deprecated" into "namespaces", and makes
"named()" predicate examine whether each names are masked by the
namespace, to which they belong.
"named()" will really work correctly after 3.3.1 (see
873eb5db89c8 for
detail), and fixing this on STABLE before 3.3.1 can prevent initial
users of "named()" from expecting "named('tags')" to include "tip".
It is reason why this patch is posted for STABLE, even though problem
itself isn't so serious.
This may have to be flagged as "(BC)", if applied on DEFAULT.
Wagner Bruna <wbruna@yahoo.com> [Sun, 01 Mar 2015 00:18:43 -0300] rev 24150
i18n-pt_BR: synchronized with
756c5c8331b0
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sun, 01 Mar 2015 01:28:05 +0900] rev 24149
i18n-ja: synchronized with
756c5c8331b0
Matt Mackall <mpm@selenic.com> [Fri, 27 Feb 2015 17:46:03 -0600] rev 24148
merge with stable
Martin von Zweigbergk <martinvonz@google.com> [Tue, 24 Feb 2015 09:08:54 -0800] rev 24147
manifest: rename 'mf', 'map', and 'mapping' to 'm'
We mostly call manifest variables 'm', so let's use that in
manifest.py too. This makes it clearer that the variables do, in fact,
contain manifestsdict instances and never a plain dict.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 23 Feb 2015 13:41:02 -0800] rev 24146
manifest: make copy logic local to copy()
The optional arguments to the manfifestdict constructor are only used
by copy(), so assign the fields from that method instead so it's clear
that the arguments are not used for anything else.
Matt Harbison <matt_harbison@yahoo.com> [Sat, 21 Feb 2015 00:40:18 -0500] rev 24145
extensions: indicate loaded for an immediately called afterload callback
Otherwise, there's no way to tell between the immediate callback when it is
already loaded, and when the extension is not loaded at all.
Gregory Szorc <gregory.szorc@gmail.com> [Tue, 24 Feb 2015 00:08:04 -0800] rev 24144
tests: add test showing tags cache drops filtered heads (
issue4550)
The tags cache can lose .hgtags filenode entries for filtered heads. Add
a test demonstrating this (bad) behavior.
Gregory Szorc <gregory.szorc@gmail.com> [Tue, 24 Feb 2015 00:06:47 -0800] rev 24143
tags: write tags cache deterministically
An upcoming test verifies content of the .hg/cache/tags file. During
testing, inconsistent output was observed. This is the result of
iterating over a dictionary.
Throw a sorted() around tags entries to ensure .hg/cache/tags is written
deterministically so test output is stable.
Mateusz Kwapich <mitrandir@fb.com> [Thu, 22 Jan 2015 12:36:38 -0800] rev 24142
histedit: add --edit-plan option to histedit
--edit-plan allows user to edit remaining histedit rules in the middle of
histedit process
Mateusz Kwapich <mitrandir@fb.com> [Thu, 22 Jan 2015 10:52:50 -0800] rev 24141
histedit: generalize makedesc
Allow makedesc to generate description for any action - not only pick.
(to be used in histedit --edit-plan)
Mateusz Kwapich <mitrandir@fb.com> [Mon, 23 Feb 2015 10:57:27 -0800] rev 24140
histedit: extract method ruleeditor
Extract functionality of editing histedit rules to separate method so we can
reuse it in upcoming --edit-plan option.
Jordi Gutiérrez Hermoso <jordigh@octave.org> [Tue, 24 Feb 2015 11:37:07 -0500] rev 24139
churn: deprecate -t option in favour of -T
We use -T consistently elsewhere to refer to the --template option.
The old -t option is now renamed to --oldtemplate so that -t still
works. This has the benign side effect of introducing and immediately
deprecating a new long option.
We also test with both -t and -T options.
Thomas Arendsen Hein <thomas@intevation.de> [Tue, 24 Feb 2015 10:55:24 +0100] rev 24138
pull: print "pulling from foo" before accessing the other repo
1. This is consistent with pushing.
2. This allows to see the URL of the other repo in case accessing the repo
fails, e.g. wrong ssh path or issues with the https certificate, without
using --debug or showconfig paths.
Additionally add test for this in the context of ssh with a wrong path.
Siddharth Agarwal <sid0@fb.com> [Wed, 18 Feb 2015 16:45:16 -0800] rev 24137
error.LookupError: rename 'message' property to something else
At least some installs of Python 2.6+ complain with:
mercurial/error.py:26: DeprecationWarning: BaseException.message has been
deprecated as of Python 2.6
This patch renames the property away from 'message' so that Python no longer
complains.