blackbox: just try writing to repo.vfs and update lastlogger on success This is simpler and more robust. Before, an empty ".hg" directory would be created if it's removed after checking vfs.isdir('.').

vfs: add option to not create parent directories implicitly In blackbox, we don't want to create a ".hg" directory by mistake. This provides a race-safe option to achieve that.

repo: add a `wcachevfs` to access the `.hg/wcache/` directory This wvfs will allow us to migrate various cache to the new `wcache` directory. Helping with cache issues with "share".

cache: create `wcache` directory at init time The cache directory will be needed very quickly, so it seems simpler to create it early to make sure it has the same owner and permission than the other directory in the repository.

cache: create `cache` directory at init time The cache directory will be needed very quickly, so it seems simpler to create it early to make sure it has the same owner and permission than the other directory in the repository.

check-exec: write file in 'wcache' instead of 'cache' Some cache are relevant or affected by the working copy used. So the `.hg/cache` directory is not the best place for them because multiple shared repository can end up fighting over them. To address this issue, we introduce a new 'wcache' directory to host this kind of cache. The first user are the `checkisexec` type file. These files describe property of the working copy and fit the use-case well.

rebase: abort in-mem rebase if there's a dirty merge state In-memory merge uses the on-disk merge state, so we should not allow it run in-memory merge when the merge state is not clean. We should probably not use the on-disk merge state when running in-memory merge, but chaning that is not suitable for the stable branch. Differential Revision: https://phab.mercurial-scm.org/D5357

rebase: preserve working copy when redoing in-mem rebase on disk When in-memory rebase runs into conflicts, we retry it on disk. But before we do that, we abort the in-memory rebase. That is done because even though it's mostly in memory, there are still a few state files written (e.g. the merge state). We should make it not write those files so we don't need to abort, but for the stable branch, let's explicitly clear the state we need to clear instead of running the usual abort code. Differential Revision: https://phab.mercurial-scm.org/D5356

tests: show that in-mem rebase falling back loses state Both working copy changes and the merge state is lost when in-memory rebase falls back to on-disk mode. Differential Revision: https://phab.mercurial-scm.org/D5355

commandserver: get around ETIMEDOUT raised by selectors2 selector.select() should exits with an empty event list on timed out, but selectors2 raises OSError if timeout expires while recovering from EINTR. Spotted while debugging new chg feature.

selectors2: backport minimal fix of timeout handling from 2.0.1 The original code would raise TypeError since OSError() doesn't support keyword arguments. We can't simply import the selectors 2.0.1, which still spawns "uname -p" through platform.system(). We could switch to the unreleased version, but I decided to not right now to minimize the change.

mmapindex: set default to 1MB mmapping index is more efficient if we only need a small part of it. The 1MB value has been picked arbitrarily, a lower value might be better. On a large repository with a 60MB index, we see the following performance gain: hg perfindex before: ! wall 0.032023 comb 0.040000 user 0.000000 sys 0.040000 (best of 100) after: ! wall 0.000196 comb 0.000000 user 0.000000 sys 0.000000 (best of 1060) The speed boost benefit all cases, including the one where the full index needs to be parsed. hg perfindex --rev 0 before: ! wall 0.040673 comb 0.030000 user 0.000000 sys 0.030000 (best of 100) after ! wall 0.010713 comb 0.020000 user 0.010000 sys 0.010000 (best of 212) This gain reflect in higher level operation: hg perfbookmarks --clear-revlogs before: ! wall 0.161339 comb 0.160000 user 0.130000 sys 0.030000 (best of 56) after: ! wall 0.123228 comb 0.120000 user 0.120000 sys 0.000000 (best of 68)

mmapindex: move the 'mmapindexthreshold' option out of experimental The option is useful and should be advertised more. We move it out of experimental as a first step. The `storage` section is selected as this is related to how the storage is accessed. A new 'performance' section might be more appropriate. We move from 'mmapindexthreshold` to `mmap-threshold` as non-index item are also suitable for mmap (eg: the rev-branch-cache). If relevant, we can introduce sub-option `mmap-threshold.revlog-index` later.

perf: add a --rev attribute to perfindex This allow for benchmarking the time necessary to look for other version than the tip.

perf: update perfindex to be more realistic The previous code was creating a revlog manually, we now use the actual `localrepo` method to create it. We have to jump though extra hops to work around the impact of filecache.

match: drop unnecessary wrapping of regex in group It seems the regexes have been wrapped in an unnamed group since b6c42714d900 (Add locate command., 2005-07-05). In that commit, the grouping was needed because there was a "head" ('^') added before the group and a "tail" (os.sep) added after it. It seems the head was moved inside the group in 1c0c413cccdd (Get add and locate to use new repo and dirstate walk code., 2005-07-18) and the tail was moved inside the group in 89985a1b3427 (Clean up walk and changes code to use normalised names properly., 2005-07-31), So it seems to me that we've carried around the unnecessary group for 13 years. This patch removes it. Differential Revision: https://phab.mercurial-scm.org/D5352

match: use _BASE_SIZE instead of magic value 4 Differential Revision: https://phab.mercurial-scm.org/D5351

match: make "groupsize" include the trailing "|" I think this is a little easier to follow and it will simplify later patches too. Differential Revision: https://phab.mercurial-scm.org/D5350

match: fix an unaligned (but harmless) indent Differential Revision: https://phab.mercurial-scm.org/D5349

match: raise an Abort error instead of OverflowError This case of OverflowError (one single pattern being too large) has never been properly caught in the past.

match: avoid translating glob to matcher multiple times for large sets For hgignore with many globs, the resulting regexp might not fit under the 20K length limit. So the patterns need to be broken up in smaller pieces. Before this change, the logic was re-starting the full process from scratch for each smaller pieces, including the translation of globs into regexp. Effectively doing the work over and over. If the 20K limit is reached, we are likely in a case where there is many such glob, so exporting them is especially expensive and we should be careful not to do that work more than once. To work around this, we now translate glob to regexp once and for all. Then, we assemble the resulting individual regexp into valid blocks. This raises a very significant performance win for large `.hgignore file`: Before: ! wall 0.153153 comb 0.150000 user 0.150000 sys 0.000000 (median of 66) After: ! wall 0.059793 comb 0.060000 user 0.060000 sys 0.000000 (median of 100)

match: extract function that group regexps

match: test for overflow error in pattern If a single pattern is too large to handle, we raise an exception. This case is now doctested.

match: extract a literal constant into a symbolic one

tests: apply binary mode to output in seq.py I noticed this when playing with running tests using WSL, and iterating over the output yielded '0\r', '1\r',... Most of the other *.py tools do this, and `seq` on MSYS lacks '\r' in the output, so this is more consistent.

perf: add a `--clear-caches` to `perfbranchmapupdate` This flag will help to measure the time we spend loading various cache that support the branchmap update. Example for an 500 000 revisions repository: hg perfbranchmapupdate --base 'not tip' --target 'tip' ! wall 0.000860 comb 0.000000 user 0.000000 sys 0.000000 (best of 336) hg perfbranchmapupdate --base 'not tip' --target 'tip' --clear-caches ! wall 0.029494 comb 0.030000 user 0.030000 sys 0.000000 (best of 100)

perf: start from an existing branchmap if possible If the --base set if a superset of one of the cached branchmap, we should use as a starting point. This greatly help the overall runtime of `hg perfbranchmapupdate` For example, for a repository with about 500 000 revisions, using this trick make the command runtime move from about 200 second to about 10 seconds. A 20x gain.

perf: rely on repoview for perfbranchmapupdate Using 'repoview' matching the base and target subset make the benchmark more realistic. It also unlocks optimization to make the command initialization faster.

perf: pre-indent some code in `perfbranchmapupdate` This make the next patch easier to read.

perf: add a `perfbranchmapupdate` command This command benchmark the time necessary to update the branchmap between two sets of revisions. This changeset introduce a first version, doing nothing fancy regarding cache or other internal details.