resolve: run happily after conflict-free merge

test-resolve: add tests for re-merge

test-resolve: add more tests for in conflict-free states We already have a test for 'hg resolve -m' when there is no merge in progress. Add one for 'hg resolve --all' as well. Also add tests for both --all and -m when there is a merge without conflicts in progress. They should both be successful, just as if there had been conflicts that had been marked resolved. However, that is currently broken, so mark the tests broken for now. The behavior will be fixed in a later patch.

test-resolve: add test resolving one of two files The tests for resolve are missing a lot of cases. Let's start by adding another file to the test repo, so we can test resolving one of two files.

test-resolve: clarify test descriptions and consistently use "should"

revset-phases: prefetch attributes in phasesrelated revsets Pre-fetching attributes gives a significant performance boost. Such is Python. draft() 0) wall 0.011661 comb 0.010000 user 0.010000 sys 0.000000 (best of 205) 1) wall 0.009804 comb 0.000000 user 0.000000 sys 0.000000 (best of 231) draft() - ::bookmark() 0) wall 0.014173 comb 0.010000 user 0.010000 sys 0.000000 (best of 177) 1) wall 0.012966 comb 0.010000 user 0.010000 sys 0.000000 (best of 182)

revset-phases: do not cache phase-related filters The phase retrieval is fast enough to not require caching the result of the functions. draft() 0) wall 0.017209 comb 0.020000 user 0.020000 sys 0.000000 (best of 149) 1) wall 0.011654 comb 0.010000 user 0.010000 sys 0.000000 (best of 186) public() 0) wall 0.018687 comb 0.010000 user 0.010000 sys 0.000000 (best of 128) 1) wall 0.013290 comb 0.010000 user 0.010000 sys 0.000000 (best of 181) secret() 0) wall 0.017464 comb 0.020000 user 0.020000 sys 0.000000 (best of 127) 1) wall 0.011499 comb 0.000000 user 0.000000 sys 0.000000 (best of 196) draft() - ::bookmark() 0) wall 0.020099 comb 0.020000 user 0.020000 sys 0.000000 (best of 127) 1) wall 0.014399 comb 0.020000 user 0.020000 sys 0.000000 (best of 169)

changectx: issue a FilteredRepoLookupError when applicable We capture FilteredxxxError and issue a FilteredRepoLookupError instead with a sightly different messsge. The message will likely get more improvement in the future. error: filtered revision '4'

repoview: add a FilteredRepoLookupError This exception is a more precise RepoLookupError that will allow us to issue a special message when we end up accessing a filtered revision.

repoview: add a FilteredLookupError class This exception is a more precise LookupError that will allow us to issue a special message when we end up accessing a filtered revision.

repoview: add a FilteredIndexError class This exception is a more precise IndexError that will allow us to issue a special message when we end up accessing a filtered revision.

changectx: move `IndexError` handling in the top level try except This one can be handled by the top level catching.

changectx: wrap the `changeid` processing in a try/except We are going to introduce more precise exception classes for filtered nodes. So we will have to upgrade them to the `RepoLookupError` level here. We wrap the whole thing into a try/except to ease this future catching. Some of the current exception catching will be moved in this one. But the current changeset focuses on code movement only.

bundle2: detect and disallow a negative chunk size We have no usage planned for 2/3 of them and the support for the planned usecase is not here yet. So we raise a BundleValueError when encountered

bundle2: add an UnsupportedPartError We need the BundleValueError for format errors not related to part support. So we add a specific class for part-support errors.

bundle2: change header size and make them signed (new format) We are changing all integers that denote the size of a chunk to read to int32. There are two main motivations for that. First, we change everything to the same width (32 bits) to make it possible for a reasonably agnostic actor to forward a bundle2 without any extra processing. With this change, this could be achieved by just reading int32s and forwarding chunks of the size read. A bit a smartness would be logic to detect the end of stream but nothing too complicated. Second, we need some capacity to transmit special information during the bundle processing. For example we would like to be able to raise an exception while a part is being read if this exception happend while this part was generated. Having signed integer let us use negative numbers to trigger special events during the parsing of the bundle. The format is renamed for B2X to B2Y because this breaks binary compatibility. The B2X format support is dropped. It was experimental to allow this kind of things. All elements not directly related to the binary format remain flagged "b2x" because they are still compatible.

bundle2: extract processing of part into its own function This is code movement only. This will be useful to have it separated for reuse purposes. We plan to introduce a new feature to the bundle format that allow inserting a part in the middle of another part payload. This will be useful to transmit a exception raised during a part generation.

bundle2: add a test for exceptions raised during the generation process We would like exceptions raised during the generation process to be gracefully handled on the receiver side. We add a test for it. It shows that we are not doing it yet.

dagwalker: drop a useless intermediate variable The variable used to contain revs.set() but as the `.set()` has been removed it is now useless.

revset-node: speedup by a few hundred fold Instead of checking all elements of the subset against a single rev, just check if this rev is in the subset. The old way was inherited from when the subset was a list. Non surprise, this provide massive speedup. id("d82e2223f132") before) wall 0.008205 comb 0.000000 user 0.000000 sys 0.000000 (best of 302) after) wall 0.000069 comb 0.000000 user 0.000000 sys 0.000000 (best of 34518) revset #1: public() and id("d82e2223f132") before) wall 0.019763 comb 0.020000 user 0.020000 sys 0.000000 (best of 124) after) wall 0.000101 comb 0.000000 user 0.000000 sys 0.000000 (best of 20130)

revset-only: use `subset &` instead of filtering The & version is more likely to be optimised. only(.) before) wall 0.003216 comb 0.000000 user 0.000000 sys 0.000000 (best of 768) after) wall 0.001086 comb 0.000000 user 0.000000 sys 0.000000 (best of 2231) only(default, stable) before) wall 0.018469 comb 0.020000 user 0.020000 sys 0.000000 (best of 138) after) wall 0.015888 comb 0.010000 user 0.010000 sys 0.000000 (best of 156)

revset-_ancestor: use & instead of filter The & operation is more likely optimised. ::10 before) wall 0.028189 comb 0.030000 user 0.030000 sys 0.000000 (best of 100) after) wall 0.001050 comb 0.000000 user 0.000000 sys 0.000000 (best of 2326) ::tip before) wall 0.081132 comb 0.080000 user 0.080000 sys 0.000000 (best of 100) after) wall 0.055418 comb 0.050000 user 0.050000 sys 0.000000 (best of 100)

obsstore: record data as floating point in fm0 format For python struct module, "d" is double. But for python string formating, "d" is integer. We want to preserve the floating point nature of the data, so we store it in the metadata as floating point. We use "%r" to make sure we get as many significant digitis as necessary to restore the float to the exact same value on the other side. The fm1 is transmitting the information as float. The lack of this made fm1-stored markers not survive a round-trip to fm0 leading to duplicated markers (or two markers very alike).

bundle2: add a comment about addchangegroup source and url

pull: call the `b2x-transactionclose` hook when closing the transaction We need a wider set of hooks to process all the changes that happened during the pull transaction. We reuse the experimental `b2x-transactionclose` hook set from server's unbundle for consistency. This hook is experimental and will not remains as-is forever, but this will open the door for experimentation in 3.2.

revset-only: use __nonzero__ to check if a revset is empty For some smartsets, computing length is more expensive than checking if the set is empty.

_spanset: drop __getitem__ implementation It is expensive and not part of the official smartset API.

filteredset: drop __getitem__ implementation It is expensive and not part of the official smartset API.

generatorset: implement __len__ It was the only smartset class without a `__len__` implementation.

revset: make __len__ part of the offical API It is common for code to ask for the length of a revset. In fact, all but generatorset already implement it.

cmdserver: add service that listens on unix domain socket and forks process Typical use case of 'unix' mode is a background hg daemon. $ hg serve --cmdserver unix --cwd / -a /tmp/hg-`id -u`.sock Unlike 'pipe' mode in which parent process keeps stdio channel, 'unix' server can be detached. So clients can freely connect and disconnect from server, saving Python start-up time. It might be better to write "--cmdserver socket -a unix:/sockpath" instead of "--cmdserver unix -a /sockpath" in case hgweb gets the ability to listen on unix domain socket.

test-commandserver: add connector for unix domain socket server The next patch will introduce --cmdserver unix.