hgweb: remove negative top from .info line in graph "top: -Xpx" shifts a block up by X pixels, which can be used to visually compress two lines of text to have less space between them, in this case it's used for the changesets on /graph page. But not only it's not needed there (both lines fit fine into their allowed vertical space), but it would also look better (not as crammed, more vertically centered) without these negative values. "position: relative" is needed solely for the "top" property to have effect on the element, no children of the .info element rely on it, so let's remove it as well.

unamend: drop unused vars, query after taking lock, use ctx.hex() for extras This is the followup of review on D821. Differential Revision: https://phab.mercurial-scm.org/D1579

test-lfs: drop a hack for ignoring convert devel-warnings This was fixed on stable in 281214150561.

convert: restore the ability to use bzr < 2.6.0 (issue5733) This effectively conditionalizes a234b32b744a. Some Linux distributions (like CentOS 7) use really old versions, and the change referenced was causing exceptions to be thrown. Even though the deprecation warning says 'since 2.5.0', it wasn't marked as such in 2.5.1, but is by 2.6.0. This was tested with 2.4.2 and 2.6.0 with PYTHONWARNINGS=::DeprecationWarning, and both paths were exercized.

py3: use bytes in place of basestring All strings in mercurial must be bytes so we can easily replace basestring with bytes. Differential Revision: https://phab.mercurial-scm.org/D1555

amend: make a copy of "extra" to avoid mutating an input I don't know of any problems this has caused, it just seems less surprising. Differential Revision: https://phab.mercurial-scm.org/D1575

tests: removes bashism from test-unamend.t FreeBSD builders fail because of bashism. Differential Revision: https://phab.mercurial-scm.org/D1578

run-tests: avoid calculating _testdir again Differential Revision: https://phab.mercurial-scm.org/D1574

run-tests: simplify by using dict.pop() with default Differential Revision: https://phab.mercurial-scm.org/D1573

py3: use byteskwargs in sparse.py This removes several dozen failures in Python 3. Differential Revision: https://phab.mercurial-scm.org/D1482

py3: define __next__ in patch.py This needed to appease Python 3's iterator protocol. This is crasher #5 in Python 3. Differential Revision: https://phab.mercurial-scm.org/D1480

run-tests: mechanism to report exceptions during test execution Sometimes when running tests you introduce a ton of exceptions. The most extreme example of this is running Mercurial with Python 3, which currently spews thousands of exceptions when running the test harness. This commit adds an opt-in feature to run-tests.py to aggregate exceptions encountered by `hg` when running tests. When --exceptions is used, the test harness enables the "logexceptions" extension in the test environment. This extension wraps the Mercurial function to handle exceptions and writes information about the exception to a random filename in a directory defined by the test harness via an environment variable. At the end of the test harness, these files are parsed, aggregated, and a list of all unique Mercurial frames triggering exceptions is printed in order of frequency. This feature is intended to aid Python 3 development. I've only really tested it on Python 3. There is no shortage of improvements that could be made. e.g. we could write a separate file containing the exception report - maybe even an HTML report. We also don't capture which tests demonstrate the exceptions, so there's no turnkey way to test whether a code change made an exception disappear. Perfect is the enemy of good. I think the current patch is useful enough to land. Whoever uses it can send patches to imprve its usefulness. Differential Revision: https://phab.mercurial-scm.org/D1477

run-tests: make --extra-config-opt work with Python 3 And add test coverage to ensure it works. Differential Revision: https://phab.mercurial-scm.org/D1476

run-tests: organize options into argument groups And sort arguments so help output is more legible. There are probably a ton of ways to group things. I tried to picture the test harness as a pipeline and attempted to draw boundaries around stages in that pipeline to create the groupings. Differential Revision: https://phab.mercurial-scm.org/D1475

run-tests: convert to argparse optparse has been deprecated since Python 3.2. Best to get on the new boat before the old one sinks. It looks like argparse formats its usage string differently than optparse. Meh. Differential Revision: https://phab.mercurial-scm.org/D1474

merge with stable

server: introduce a 'experimental.single-head-per-branch' option When the option is set, the repository will reject any transaction adding multiple heads to the same named branch. For now we reject all scenario with multiple heads. One could imagine handling closed branches differently. We prefer to keep things simple for now. The feature might get extended later. Branch closing is not the best experience Mercurial has to offer anyway.

scmutil: extra utility to display a reasonable amount of nodes Push have some logic to display a reasonable amount nodes. We extract it to an utility function to make it reusable.

uncommit: unify functions _uncommitdirstate and _unamenddirstate to one The _unamenddirstate() function was inspired by _uncommitdirstate() function as the logic was same but we were unable to use the latter function directly. So previous patch introduced the _unamenddirstate() function and now this patch unifies both the function and we have a _fixdirstate() function. Adding function in previous patch and unifying in a later patch makes the reasoning easier and also leaves the last patch dedicated to what it is meant to be. Differential Revision: https://phab.mercurial-scm.org/D971

unamend: move fb extension unamend to core unamend extension adds an unamend command which undoes the effect of the amend command. This patch moves the unamend command from that extension to uncommit extension and this one does not completely undoes the effect of amend command as it creates a new commit, rather than reviving the old one back. This also adds tests for the same. .. feature:: A new unamend command in uncommit extension which undoes the effect of the amend command by creating a new changeset which was there before amend and moving the changes that were amended to the working directory. Differential Revision: https://phab.mercurial-scm.org/D821

color: respect HGPLAINEXCEPT=color to allow colors while scripting (issue5749) I'd also like --color=always on the command-line to override HGPLAIN=1 et al, but that's more work, and this seems like a better fix. We've got a fair number of programs that actually want to automate hg and get colored output to users, so they should set HGPLAINEXCEPT=alias (what we usually recommend), but this has been breaking them because they then lose color. .. feature:: The ``HGPLAINEXCEPT`` environment variable can now include ``color`` to allow automatic output colorization in otherwise automated environments. Differential Revision: https://phab.mercurial-scm.org/D1532

test-ssh: do not actually look up "brokenrepository" by DNS

largefiles: explicitly set the source and sink types to 'hg' for lfconvert I stumbled into this prior to adding the type indicator on the source and sink, but there's no reason to try to infer the types for this conversion.

lfs: add a repo requirement for this extension when converting to lfs This covers both the vanilla repo -> lfs repo and largefiles -> lfs conversions. The largefiles extension adds the requirement directly, because it has a dedicated command to convert. Using the convert extension is better, because it supports more features. I'd like ideas about how to ensure that converting away from lfs works on all files. (See comments in test-lfs.t)

convert: allow the sink object to be wrapped when the extension isn't loaded The next patch will wrap the conversion code, in order to write out a requirement for 'lfs' when appropriate. Wrapping convcmd.convertsink() in an afterloaded callback works fine when the convert extension is enabled by the user. The problem here is that lfconvert uses the convert extension, whether or not it was formally enabled by the user. My first attempt was to have lfs install an afterloaded callback that would wrap the convert sink if convert was loaded, or wrap lfconvert if it wasn't. Then the lfconvert override could install an afterloaded callback to try wrapping the convert sink again, before calling the original lfconvert. But that breaks down if largefiles can't load the convert extension on the fly. [1] Further, some tests were failing with an error indicating that the size of the afterloaded list changed while iterating it. Yuya mentioned that maybe some bits of convert could be moved into core, but I'm not sure where to draw that line. The convertsink() method depends on the list of sinks, which in turn depends on the sink classes. [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-November/108038.html

convert: save an indicator of the repo type for sources and sinks This seems like basic info to have, and will be used shortly when deciding whether or not to wrap the class for lfs conversions. The other option is to just add a function to each class. But this seems better in that the strings aren't duplicated, and the constructor for most of these will run even if the VCS isn't installed, so it's easier to catch errors.

lfs: add a repo requirement for this extension once an lfs file is committed Largefiles does the same thing (also delayed until the first largefile commit), to prevent access to the repo without the extension. In the case of this extension, not having the extension loaded while accessing an lfs file results in cryptic errors about "missing processor for flag '0x2000'". If enabled locally but not remotely, the cryptic error message is about no common changegroup version. (It wants '03', which is currently experimental.) The largefiles extension looks for any tracked file that starts with '.hglf/'. Unfortunately, that doesn't work here. I didn't see any way to get the files that were just committed, without doing a full status. But since there's no secondary check on adding an lfs file once the extension is loaded and a threshold set, the best practice is to only enable this locally on a repo that needs it. That should minimize the unnecessary overhead for repos without an lfs file.

Added signature for changeset a92b9f8e11ba

Added tag 4.4.2 for changeset a92b9f8e11ba

merge: check created file dirs for path conflicts only once (issue5716) In large repositories, updates involving the creation of many files check the same directories repeatedly in the wctx manifest. Move these checks out to a separate loop to avoid repeated checks hitting the manifest. Differential Revision: https://phab.mercurial-scm.org/D1226