dirstate: move parents source of truth to dirstatemap As part of moving dirstate storage to its own class, let's move the source of truth for the dirstate parents to dirstatemap. This requires that dirstate._pl no longer be a cache, and that all sets go through dirstatemap.setparents. Differential Revision: https://phab.mercurial-scm.org/D759

dirstate: move parent reading to the dirstatemap class As part of moving dirstate storage logic to a separate class, let's move the function that reads the parents from the file. This will allow extensions to write dirstate's that store the parents in other ways. Differential Revision: https://phab.mercurial-scm.org/D758

dirstate: move opendirstatefile to dirstatemap As part of moving the dirstate storage logic to another class, let's move opendirstatefile to dirstatemap. This will allow extensions to replace the pending abstraction. Future patches will move the consumers of _opendirstatefile into dirstatemap as well. Differential Revision: https://phab.mercurial-scm.org/D757

dirstate: move _copymap to dirstatemap As part of moving all dirstate storage to a new class, let's move the copymap onto that class. In a future patch this will let us move the read/write functions to the dirstatemap class, and for extensions this lets us replace the copy storage with alternative storage. Differential Revision: https://phab.mercurial-scm.org/D756

dirstate: move _dirs to dirstatemap As part of moving the dirstate storage logic to a new class, lets move the _dirs computation onto the class so extensions can replace it with a persisted index of directories. Differential Revision: https://phab.mercurial-scm.org/D755

dirstate: move filefoldmap to dirstatemap As part of moving the dirstate storage logic to a separate class, lets move the filfoldmap computation to that class. This will allow extensions to replace the dirstate storage with something that persists the filefoldmap. Differential Revision: https://phab.mercurial-scm.org/D754

dirstate: move nonnormalentries to dirstatemap As part of moving dirstate storage to its own class, let's move the nonnormalentries logic onto the dirstatemap class. This will let extensions replace the nonnormalentries logic with a persisted cache. Differential Revision: https://phab.mercurial-scm.org/D753

dirstate: create new dirstatemap class This is part of a larger refactor to move the dirstate storage logic to a separate class, so it's easier to rewrite the dirstate storage layer without having to rewrite all the algorithms as well. Step one it to create the class, and replace dirstate._map with it. The abstraction bleeds through in a few places where the main dirstate class has to access self._map._map, but those will be cleaned up in future patches. Differential Revision: https://phab.mercurial-scm.org/D752

style: always use `x is not None` instead of `not x is None` Differential Revision: https://phab.mercurial-scm.org/D842

templatekw: add new-style template expansion to {manifest} The goal is to allow us to easily access to nested data. The dot operator will be introduced later so we can write '{p1.files}' instead of '{revset("p1()") % "{files}"}' for example. In the example above, 'p1' needs to carry a mapping dict along with its string representation. If it were a list or a dict, it could be wrapped semi-transparently with the _hybrid class, but for non-list/dict types, it would be difficult to proxy all necessary functions to underlying value type because several core operations may conflict with the ones of the underlying value: - hash(value) should be different from hash(wrapped(value)), which means dict[wrapped(value)] would be invalid - 'value == wrapped(value)' would be false, breaks 'ifcontains' - len(wrapped(value)) may be either len(value) or len(iter(wrapped(value))) So the wrapper has no proxy functions and its scope designed to be minimal. It's unwrapped at eval*() functions so we don't have to care for a wrapped object unless it's really needed: # most template functions just call evalfuncarg() unwrapped_value = evalfuncarg(context, mapping, args[n]) # if wrapped value is needed, use evalrawexp() maybe_wrapped_value = evalrawexp(context, mapping, args[n]) Another idea was to wrap every template variable with a tagging class, but which seemed uneasy without a static type checker. This patch updates {manifest} to a mappable as an example.

templater: adjust binding strength of '%' and '|' operators (BC) This makes 'foo|bar%baz' parsed as '(foo|bar)%baz', not 'foo|(bar%baz)'. Perhaps it was a mistake that '%' preceded '|'. Both '|' and '%' can be considered a kind of function application, and '|' is more like a '.' operator seen in OO languages. So IMHO '|' should have the same (or higher) binding as '%'. The BC breakage should be minimal since both '|' and '%' operators have strict requirements for their operands and 'foo|bar%baz' was invalid: - right-hand side of '|' must be a symbol - left-hand side of '%' must be a dict or list - right-hand side of '%' must be a string or symbol

templatekw: just pass underlying value (or key) to joinfmt() function Before, iter(hybrid) was proxied to hybrid.gen, which generated formatted strings. That's why we had to apply joinfmt() to the dicts generated by hybrid.itermaps(). Since this weird API was fixed at a0f2d83f8083, we can get rid of the makemap() calls from join().

scmutil: extract helper functions that returns human-readable change id We do "'%d:%s' % (ctx...)" at several places, so let's formalize it. A low- level function, formatrevnode(ui, rev, node), is extracted so we can pass a manifest rev/node pair. Note that hex() for manifest output can be replaced with hexfunc() because it is printed only when debugflag is set. i18n/de.po is updated so test-log.t passes with no error.

templater: extract helper to just evaluate template expression A named function can be easily grepped and is probably good for code readability.

templater: do not destructure operands in buildmap() This makes the next patch slightly simpler.

templater: use helper function to get name of non-iterable keyword

pull: remove inadequate use of operations records to update stepdone The 'stepdone' set is design to be a client side mechanism. If the client used some advanced capabilities to request necessary information (changeset, obsmarkers, phases, etc). It marks the steps as done to avoid having a less advanced mechanism issue a duplicated request. So, the "stepdone.add('phases')" should be the result of a client choice, because only the client can know it has requested all it needed to request. In 4a08cf1a2cfe this principle was broken because any phase-heads part sent by the server to the client would declare the phases retrieval complete. Now that there is an official phases related capability and code associated to it. We do not need the change in 4a08cf1a2cfe anymore and we can back it out. This brings back 'stepdone' management for 'phases' in line with the rest of the code (including other phases handing). Here is an example of potential misbehavior that 4a08cf1a2cfe introduced: Imagine a server that pre-computes bundles. The bundles contains a changegroup part and an (advisory) 'phase-heads' part. When a pull occurs, precomputed bundled are reused if available. As the phase part is advisory it can be sent to all clients. However they could be relevant changesets without phase information. Either because they are already common or because they had no precomputed bundle for them yet. If receiving any 'phase-heads' parts disable subsequent phases re-trivial parts, the client will not request phase data for all relevant changesets. For example common changesets will not turn public.

pull: use 'phase-heads' to retrieve phase information A new bundle2 capability 'phases' has been added. If 'heads' is part of the supported value for 'phases', the server supports reading and sending 'phase- heads' bundle2 part. Server is now able to process a 'phases' boolean parameter to 'getbundle'. If 'True', a 'phase-heads' bundle2 part will be included in the bundle with phase information relevant to the whole pulled set. If this method is available the phases listkey namespace will no longer be listed. Beside the more efficient encoding of the data, this new method will greatly improve the phase exchange efficiency for repositories with non-served changesets (obsolete, secret) since we'll no longer send data about the filtered heads. Add a new 'devel.legacy.exchange' config item to allow fallback to the old 'listkey in bundle2' method. Reminder: the pulled set is not just the changesets bundled by the pull. It also contains changeset selected by the "pull specification" on the client side (eg: everything for bare pull). One of the reason why the 'pulled set' is important is to make sure we can move -common- nodes to public.

bundle2: only grab a transaction when 'phase-heads' affect the repository The next patch will use the 'phase-heads' part to exchange phase data relevant to the pulled set. 'handlephases' currently acquires a transaction even in case of no-op pull, which would results in an empty transaction and messing with the existing journal. Pass the transaction fetcher to updatephases so it can fetch it if necessary.

phases: move the binary decoding function in the phases module We move the decoding function near the encoding one in a place where they can be reused in other place (current target, 'exchange.py').

phases: move binary encoding into a reusable function We want to use binary phases for pushing and pulling. We extract the encoding function out of the bundle2 module first.

phases: use a Struct object for binary encoding and decoding We will move the binary encoding and decoding code to 'phases.py' in order to make it easier to reuse. First, let's cleanup it a bit.

discovery: avoid dropping remote heads hidden locally An extra post processing was added to recognize remote heads that are hidden locally as "common" instead of "unknown". However, this processing was removing such hidden heads from the remote heads sets. It had no impact because we used to pull phase information from all remote heads. This series will replace the phase pulling operation to a more efficient process but requires the unmodified pulled set information.

test-patchbomb: use mocktime The test was using system time for displaying ETAs, which could be flaky if the sysload is high. This patch extracts mocktime.py from test-progress.t to make sure test-patchbomb.t is unaffected by system time. Differential Revision: https://phab.mercurial-scm.org/D844

test-patchbomb: fix the test With the experimental config `progress.estimate` removed, the progress output in `test-patchbomb.t` has a minor change: it shows ETA since the beginning. (This could be folded into f428c3)

progress: make ETA only consider progress made in the last minute This patch limits the estimate time interval to roughly the last minute (configurable by `estimateinterval`) to be more practical. See the test change for why this is better. .. feature:: Estimated time is more accurate with non-linear progress Differential Revision: https://phab.mercurial-scm.org/D820

progress: remove progress.estimate config It was introduced by 98e4d39 ("progress: add speed format" 2011-5-9) and was intended to hide ETA information for the first few seconds. Later 5d261fd ("progress: add a changedelay to prevent parallel topics from flapping (issue2698)" 2011-6-23) introduced `changedelay` config which hides the entire progress bar for the first few seconds. So `progress.estimate` seems somehow duplicated feature-wise. Since it's experimental and duplicated, let's just remove it. This makes the next patch simpler - it no longer needs to make sure `starttimes` is the real start time. Differential Revision: https://phab.mercurial-scm.org/D828

progress: demonstrate non-linear progress has a bad ETA experience Previously, the ETA and speed assumes the progress is linear. Often, due to network or other issues, it could be fast for the most time, and suddenly slow down: [====================================================> ] \___________________________________________/\______/ very fast suddenly much slower This patch adds a test demonstrating the ETA could be way off in those cases. Differential Revision: https://phab.mercurial-scm.org/D819

copytrace: add a a new config to limit the number of drafts in heuristics The heuristics options tries to the default full copytracing algorithm if both the source and destination branches contains of non-public changesets only. But this can be slow in cases when we have a lot of drafts. This patch adds a new config option experimental.copytrace.sourcecommitlimit which defaults to 100. This value will be the limit of number of drafts from c1 to base. Incase there are more changesets even though they are draft, the heuristics algorithm will be used. Differential Revision: https://phab.mercurial-scm.org/D763

mail: encode long unicode lines in emails properly (issue5687) 3e544c074459 introduced a bug: emails Content-Transfer-Encoding is silently replaced with 'quoted-printable' while any other encoding could be used by underlying code. The problem is revealed when a long unicode line is encoded. The patch implements proper check which works for any text and encoding.

chg: show timestamp with debug messages Like `strace -tr`, this helps finding performance bottlenecks. Differential Revision: https://phab.mercurial-scm.org/D807

keepalive: add more context to bad status line errors As the TODO in the test said, the previous error message was not very helpful. Let's improve things. Differential Revision: https://phab.mercurial-scm.org/D811

tests: add interface checks for bundle, statichttp, and union peers I forgot to add these when I initially wrote the test. They inherit from localrepo.localpeer, so they should be explicitly tested. Differential Revision: https://phab.mercurial-scm.org/D810

alias: make alias command lazily resolved With many aliases, resolving them could have some visible overhead. Below is part of traceprof [1] output of `hg bookmark --hidden`: (time unit: ms) 37 \ addaliases dispatch.py:526 37 | __init__ (60 times) dispatch.py:402 33 | findcmd (108 times) cmdutil.py:721 16 | findpossible (49 times) cmdutil.py:683 It may get better by optimizing `findcmd` to do a bisect, but we don't really need to resolve an alias if it's not used, so let's make those command entries lazy. After this patch, `addalias` takes less than 1ms. .. perf:: improved performance when many aliases are defined [1]: https://bitbucket.org/facebook/hg-experimental/src/9aca0dbdbdfc48457e5d2581ca2d6e662fced2e6/hgext3rd/traceprof.pyx Differential Revision: https://phab.mercurial-scm.org/D805

alias: test duplicated definition earlier This patch moves the old definition checking logic introduced by f4b7be3f8430 earlier. So that the test itself does not depend on `aliasdef`. The check is to avoid wrapping a same alias multiple times. It can be done by checking the config name and value (`definition` in code), without constructing a `cmdalias` instance. This makes the next patch easier to review. Differential Revision: https://phab.mercurial-scm.org/D804

uncommit: add a test for uncommit with uncommitondirtywdir config in merge Differential Revision: https://phab.mercurial-scm.org/D809

largefiles: force an on-disk merge Largefiles isn't a good candidate for in-memory merge (it uses a custom dirstate, matcher, and the files might not fit in memory) so have it always run an old-style merge. Differential Revision: https://phab.mercurial-scm.org/D683

merge: allow a custom working context to be passed to update This will allow anyone to enable the first in-menmory merge milestone by wrapping merge.update in an extension and creating an overlayworkingctx. Differential Revision: https://phab.mercurial-scm.org/D682

patchbomb: add test that shows --to and --cc override matching config item As far as I know this has always been true and is intentional (it's in line with many other behaviors), but it wasn't tested.

blackbox: move _openlogfile to a separate method This removes several `stat` syscalls for accessing `_bbvfs` and makes `ui` object cleaner. Differential Revision: https://phab.mercurial-scm.org/D769

blackbox: do not prevent 'chg init' from working Previously, blackbox always appends to blackbox.log and creates the directory for that file on demand. That could be an issue if: 1. chg starts from `$REPO` directory, so `ui._bbrepo` is set. 2. `rm -rf $REPO`. 3. `chg init $REPO`, blackbox writes something and `init` will fail because `$REPO` directory is non-empty. This patch fixes that by verifying whether vfs exists before re-using it. Differential Revision: https://phab.mercurial-scm.org/D768

tests: add a test for blackbox with nested alias configurations I've observed some weirdness around this, and needed to rule some things out. There aren't any bugs in core around this, but it was nice to have confirmation.

tests: clean up blackbox test around aliases a little bit

revlog: add option to mmap revlog index Following on from Jun Wu's patch last October[1], we have found that using mmap for the revlog index in repos with large revlogs gives a noticable performance improvment (~110ms on each hg invocation), particularly for commands that don't touch the index very much. This changeset adds this as an option, activated by a new experimental config option so that it can be enabled on a per-repo basis. The configuration option specifies an index size threshold at which Mercurial will switch to using mmap to access the index. If the configuration option is not specified, the default remains to load the full file, which seems to be the best option for smaller repos. Some initial performance numbers for average of 5 invocations of `hg log -l 5` for different cache states: | Repo: | HG | FB | |---|---|---| | Index size: | 2.3MB | much bigger | | read (warm): | 237ms | 432ms | | mmap (warm): | 227ms | 321ms | | | (-3%) | (-26%) | | read (cold): | 397ms | 696ms | | mmap (cold): | 410ms | 888ms | | | (+3%) | (+28%) | [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2016-October/088737.html Test Plan: `hg log --config experimental.mmapindex=true` Differential Revision: https://phab.mercurial-scm.org/D477

util: add an mmapread method This is useful for large files that are only partly touched. Test Plan: Will be used and tested in a later patch. Differential Revision: https://phab.mercurial-scm.org/D476

changegroup: remove dictionary creation from deltachunk Previously delta chunk returned a dictionary. Now that we consume deltachunk within changegroup (instead of outside in revlog) we can just return a tuple and have it be returned directly by deltaiter. Differential Revision: https://phab.mercurial-scm.org/D746

bundlerepo: update to use new deltaiter api Differential Revision: https://phab.mercurial-scm.org/D745

debug: update debugbundle to use new deltaiter api Changegroup now has a deltaiter api for easy iteration over a series of deltas. Let's use that in the debugbundle command. Differential Revision: https://phab.mercurial-scm.org/D744

revlog: add revmap back to revlog.addgroup The recent c8b6ed51386b patch removed the linkmapper argument from addgroup, as part of trying to make addgroup more agnostic from the changegroup format. It turns out that the changegroup can't resolve linkrevs while iterating over the deltas, because applying the deltas might affect the linkrev resolution. For example, when applying a series of changelog entries, the linkmapper just returns len(cl). If we're iterating over the deltas without applying them to the changelog, this results in incorrect linkrevs. This was caught by the hgsql extension, which reads the revisions before applying them. The fix is to return linknodes as part of the delta iterator, and let the consumer choose what to do. Differential Revision: https://phab.mercurial-scm.org/D730

rebase: also include other namespaces in changeset description This makes use of the generic method of listing bookmarks and tags, so other extensions that add other namespaces will get their names added too. This does mean that bookmarks will come before tags, just like we apparently decided to order them in the "hg log" output. It doesn't seem like people would be parsing the rebase output anyway. We also did 79ab5369d55a (rebase: use _ctxdesc in one more place, 2017-08-29) recently, so now seems like a good time. Differential Revision: https://phab.mercurial-scm.org/D741

tersestatus: sort the dictionary before iterating on it There has report of flakiness in test-status-terse.t. In the terse code, we are iterating on a dictionary without sorting and since python dicts are unordered, that can be a reason behind the flakiness. Before we have a better implementation for the terse thing, let's make sure current implementation possess minimum bugs. Differential Revision: https://phab.mercurial-scm.org/D740

copytrace: use the full copytracing method if only drafts are involved This patch adds the functionality to use the full copytracing even if `experimental.copytrace = heuristics` in cases when drafts are involved. This is also a part of copytrace extension in fbext. This also adds tests which are also taken from fbext. .. feature:: The `heuristics` option for `experimental.copytrace` performs full copytracing if both source and destination branches contains non-public changsets only. Differential Revision: https://phab.mercurial-scm.org/D625

templates: introduce a obsfateoperation() function Differential Revision: https://phab.mercurial-scm.org/D723

obsmarker: track operation by default We added support for including the operation responsible for creating the obsmarker in 3546a771e376 (obsolete: add operation metadata to rebase/amend/histedit obsmarkers, 2017-05-09). However, soon thereafter, in f432897a9f49 (obsmarker: add an experimental flag controlling "operation" recording, 2017-05-20), it was hidden behind a config that was off by default. It seems unlikely that people will manually turn it on, and obsmarkers/evolution as a whole is still experimental anyway, so let's turn on the tracking by default. Differential Revision: https://phab.mercurial-scm.org/D722

uncommit: add an experimental.uncommitondirtywdir config There are people who wants to do `hg uncommit` on dirty working directory, so this patch adds a config which can be used to the achieve that. Adds tests for the same. Differential Revision: https://phab.mercurial-scm.org/D735

uncommit: don't allow bare uncommit on dirty working directory As per IRC discussion and suggestion by Augie, we should not allow bare `hg uncommit` on dirty working directory. Differential Revision: https://phab.mercurial-scm.org/D734

uncommit: rename the flag 'empty' to 'keep' which retains empty changeset This patch renames the flag 'empty' which retains the empty changeset if all the files are uncommitted to 'keep'. Differential Revision: https://phab.mercurial-scm.org/D726

tests: avoid repr in test-bundle2-format.t We don't *really* need it here, and it was making Python 3 harder.

tests: port test-bundle2-format inline helper script to Python 3 We're now very close to this test passing.

bundle2: portably grab first byte of part name for letter check

bundle2: make ValueError messages native strings

bundle2: update check for a generator to work on Python 3

bundle2: stop using %r to quote part names Valid part names are restricted to [a-zA-Z0-9_:-]+, so I'm not worried about having quoting present in places where we should have predominantly valid part names. This will significantly ease the Python 3 transition, and simultaneously isn't a BC because this is only in error messages that should never be shown.

blackbox: set lastui even if ui.log is not called (issue5518) `lastui` decides where (where is the `.hg`) to use if the current `ui` object does not have a `_bbrepo` associated. Previously it only gets set in `ui.log`, which means unless a `ui` with repo associated calls `log` with tracked event, blackbox does not know where to write its log. This patch makes `reposetup` set `lastui` so it so we could log some more events (see test changes). Differential Revision: https://phab.mercurial-scm.org/D655