Sat, 20 May 2017 15:06:10 +0200 strip: also backup obsmarkers
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 May 2017 15:06:10 +0200] rev 32623
strip: also backup obsmarkers We are about to give 'strip' the ability to remove obsmarkers. Before we start removing data we must make sure it is preserved somewhere. So the backup bundle created by 'strip' now contains obsmarkers.
Tue, 30 May 2017 20:48:43 -0400 tests: fix run-tests when there's a bad #if in a test
Augie Fackler <augie@google.com> [Tue, 30 May 2017 20:48:43 -0400] rev 32622
tests: fix run-tests when there's a bad #if in a test That has (and still does) caused the test to be skipped, but without this fix it was possible to exit this block of code without clearing the output channel, which poisoned the channel list for later test method runs. Fix this by always clearing the channel in a finally. The test for this is somewhat unfortunate. Sadly, I couldn't get a way to reproduce this with less than 2n+1 test cases, nor could I get it to reproduce reliably without the sleep statements. It's also crucial that the test with the broken #if be smaller (in terms of byte count) than the sleeping tests, so that it runs first and would poison the channel list prior to another test needing that entry from the list.
Tue, 30 May 2017 20:47:00 -0400 tests: make run-tests fail early if no channel is found
Augie Fackler <augie@google.com> [Tue, 30 May 2017 20:47:00 -0400] rev 32621
tests: make run-tests fail early if no channel is found I hit a weird corner case in run-tests where a test that caused an exception to be raised was breaking everything with an unbound variable error a few lines down because channel was never getting set in this for loop. By adding an `else` clause to this for loop, we can explode right away if we can't find a channel and give the developer a better chance at figuring out what's going on.
Sun, 28 May 2017 15:47:00 -0400 dispatch: convert exception payload to bytes more carefully
Augie Fackler <raf@durin42.com> [Sun, 28 May 2017 15:47:00 -0400] rev 32620
dispatch: convert exception payload to bytes more carefully We were previously depending on str() doing something reasonable here, and we can't depend on the objects in question supporting __bytes__, so we work around the lack of direct bytes formatting.
Sun, 28 May 2017 15:49:29 -0400 help: convert flag default to bytes portably
Augie Fackler <raf@durin42.com> [Sun, 28 May 2017 15:49:29 -0400] rev 32619
help: convert flag default to bytes portably We were relying on %s using repr on (for example) integer values. Work around that for Python 3 while preserving all the prior magic.
Thu, 01 Jun 2017 23:08:23 +0900 cmdutil: use isstdiofilename() where appropriate
Yuya Nishihara <yuya@tcha.org> [Thu, 01 Jun 2017 23:08:23 +0900] rev 32618
cmdutil: use isstdiofilename() where appropriate
Thu, 01 Jun 2017 23:05:29 +0900 py3: simply use b'%d\n' to format pid in server.py
Yuya Nishihara <yuya@tcha.org> [Thu, 01 Jun 2017 23:05:29 +0900] rev 32617
py3: simply use b'%d\n' to format pid in server.py Spotted by Martin, thanks.
Thu, 01 Jun 2017 22:43:24 +0900 py3: implement __bytes__() on most of our exception classes
Yuya Nishihara <yuya@tcha.org> [Thu, 01 Jun 2017 22:43:24 +0900] rev 32616
py3: implement __bytes__() on most of our exception classes We store bytes in exc.args, which should be translated to a byte string without encode/decode dance. IOError subclasses are unchanged for now. We'll need to decide how our IOErrors should be caught.
Thu, 01 Jun 2017 22:24:15 +0900 py3: convert __doc__ back to bytes in help.py
Yuya Nishihara <yuya@tcha.org> [Thu, 01 Jun 2017 22:24:15 +0900] rev 32615
py3: convert __doc__ back to bytes in help.py pycompat.getdoc() is pretty simple, but we wouldn't want to write handling of None inline.
Thu, 01 Jun 2017 01:41:34 +0530 py3: ensure that we don't concat bytes and str and the end result is bytes
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 01 Jun 2017 01:41:34 +0530] rev 32614
py3: ensure that we don't concat bytes and str and the end result is bytes Here obj.__module__ and obj.__name__ are str. Either we can convert them to bytes or use an r'' and convert back to bytes when concat is done. I preferred the later one since we are encoding only once here.
Thu, 01 Jun 2017 00:00:10 +0530 py3: make sure we return strings from __str__ and __repr__
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 01 Jun 2017 00:00:10 +0530] rev 32613
py3: make sure we return strings from __str__ and __repr__ On Python 3: >>> class abc: ... def __repr__(self): ... return b'abc' ... >>> abc() Traceback (most recent call last): File "<stdin>", line 1, in <module> TypeError: __repr__ returned non-string (type bytes) >>> class abc: ... def __str__(self): ... return b'abc' ... >>> str(abc()) Traceback (most recent call last): File "<stdin>", line 1, in <module> TypeError: __str__ returned non-string (type bytes) So the __str__ and __repr__ must return strings.
Wed, 31 May 2017 23:48:52 +0530 py3: replace None with -1 to sort an integer array
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 31 May 2017 23:48:52 +0530] rev 32612
py3: replace None with -1 to sort an integer array In Python 2: >>> ls = [4, 2, None] >>> sorted(ls) [None, 2, 4] In Python 3: >>> ls = [4, 2, None] >>> sorted(ls) Traceback (most recent call last): File "<stdin>", line 1, in <module> TypeError: unorderable types: NoneType() < int() Therefore we replaced None with -1, and the safe part is that, None and -1 are only the keys which are used for sorting so we don't need to convert the -1's back to None.
Wed, 31 May 2017 23:42:58 +0530 py3: pass str in os.sysconf()
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 31 May 2017 23:42:58 +0530] rev 32611
py3: pass str in os.sysconf() os.sysconf() doesn't accepts bytes on Python 3. Adding r'' will make sure b'' is not added here.
Thu, 11 May 2017 13:59:48 -0700 context: move dirty() to committablectx
Sean Farley <sean@farley.io> [Thu, 11 May 2017 13:59:48 -0700] rev 32610
context: move dirty() to committablectx This is a pedantic move. It should be an error if dirty() is called on a read-only context. Based on Mads Kiilerix's and my work at the sprint.
Thu, 11 May 2017 13:51:10 -0700 committablectx: extra is already normalized by committablectx.__init__
Sean Farley <sean@farley.io> [Thu, 11 May 2017 13:51:10 -0700] rev 32609
committablectx: extra is already normalized by committablectx.__init__ Avoid doing the same work again. Based on work done by Mads Kiilerix.
Fri, 02 Jun 2017 10:44:40 +0200 help: clarify the choice of pager stable
Xavier Lepaul <xalep@google.com> [Fri, 02 Jun 2017 10:44:40 +0200] rev 32608
help: clarify the choice of pager This follows the change made in d83e51654c8a to use environment variables between system and user configuration.
Fri, 02 Jun 2017 20:50:46 -0300 i18n-pt_BR: fix syntax error on translation stable
Wagner Bruna <wbruna@softwareexpress.com.br> [Fri, 02 Jun 2017 20:50:46 -0300] rev 32607
i18n-pt_BR: fix syntax error on translation
Thu, 01 Jun 2017 20:06:02 -0300 i18n-pt_BR: synchronized with 870248603a4e stable
Wagner Bruna <wbruna@softwareexpress.com.br> [Thu, 01 Jun 2017 20:06:02 -0300] rev 32606
i18n-pt_BR: synchronized with 870248603a4e
Thu, 01 Jun 2017 00:40:52 -0700 match: introduce nevermatcher for when no ignore files are present
Siddharth Agarwal <sid0@fb.com> [Thu, 01 Jun 2017 00:40:52 -0700] rev 32605
match: introduce nevermatcher for when no ignore files are present 952017471f93 introduced a deterministic `__repr__` for ignores. However, it didn't account for when ignore was `util.never`. This broke fsmonitor's ignore change detection -- with an empty hgignore, it would kick in all the time. Introduce `nevermatcher` and switch to it. This neatly parallels `alwaysmatcher`.
Wed, 31 May 2017 11:41:54 -0700 check-code: suggest policy.importmod
Jun Wu <quark@fb.com> [Wed, 31 May 2017 11:41:54 -0700] rev 32604
check-code: suggest policy.importmod This forbids patterns like `from mercurial.cext import parsers` which breaks pure.
Fri, 26 May 2017 03:41:10 +0200 test-obsolete-bundle-strip: test bundling in the seventh case
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 03:41:10 +0200] rev 32603
test-obsolete-bundle-strip: test bundling in the seventh case Updating all cases in the file at the same time is a bit overwhelming and harder to double check. So each case come in its own patch.
Fri, 26 May 2017 03:23:56 +0200 test-obsolete-bundle-strip: test bundling in the sixth case
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 03:23:56 +0200] rev 32602
test-obsolete-bundle-strip: test bundling in the sixth case Updating all cases in the file at the same time is a bit overwhelming and harder to double check. So each case come in its own patch.
Fri, 26 May 2017 03:20:40 +0200 test-obsolete-bundle-strip: test bundling in the fifth case
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 03:20:40 +0200] rev 32601
test-obsolete-bundle-strip: test bundling in the fifth case Updating all cases in the file at the same time is a bit overwhelming and harder to double check. So each case come in its own patch.
Fri, 26 May 2017 03:20:25 +0200 test-obsolete-bundle-strip: test bundling in the fourth case
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 03:20:25 +0200] rev 32600
test-obsolete-bundle-strip: test bundling in the fourth case Updating all cases in the file at the same time is a bit overwhelming and harder to double check. So each case come in its own patch.
Fri, 26 May 2017 03:19:11 +0200 test-obsolete-bundle-strip: test bundling in the third case
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 03:19:11 +0200] rev 32599
test-obsolete-bundle-strip: test bundling in the third case Updating all cases in the file at the same time is a bit overwhelming and harder to double check. So each case come in its own patch.
Fri, 26 May 2017 03:15:53 +0200 test-obsolete-bundle-strip: test bundling in the second case
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 03:15:53 +0200] rev 32598
test-obsolete-bundle-strip: test bundling in the second case Updating all cases in the file at the same time is a bit overwhelming and harder to double check. So each case come in its own patch.
Fri, 26 May 2017 03:11:53 +0200 test-obsolete-bundle-strip: test bundling in the first case
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 03:11:53 +0200] rev 32597
test-obsolete-bundle-strip: test bundling in the first case We adds a shell function checking that the relevant markers and the bundled markers matches. Updating all cases in the file at the same time is a bit overwhelming and harder to double checks. So each cases come in its own patch.
Thu, 25 May 2017 16:50:23 +0200 obsolete: raise richer exception on unknown version
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 May 2017 16:50:23 +0200] rev 32596
obsolete: raise richer exception on unknown version We raise a more precise subclass of Abort with details about the faulty version. This will be used to detect this case and display some information in debugbundle.
Wed, 31 May 2017 20:07:08 -0700 import-checker: add hgdemandimport to local modules
Siddharth Agarwal <sid0@fb.com> [Wed, 31 May 2017 20:07:08 -0700] rev 32595
import-checker: add hgdemandimport to local modules This fixes test-check-module-imports.t.
Wed, 31 May 2017 19:46:04 -0700 rebase: drop unnecessary parentchange call
Siddharth Agarwal <sid0@fb.com> [Wed, 31 May 2017 19:46:04 -0700] rev 32594
rebase: drop unnecessary parentchange call We're calling localrepo.setparents here, not dirstate.setparents. localrepo.setparents calls dirstate.parentchange already.
(0) -30000 -10000 -3000 -1000 -300 -100 -50 -30 +30 +50 +100 +300 +1000 +3000 +10000 tip