mq: use repo.changelog.tip() instead of the "tip" tag

Fix missing space in one of the new update messages.

qclone: do not abort if remote hasn't enabled mq (issue1040)

hgweb: add compatibility code for old templates Up to changeset 3340aa5a64f7, HTTP headers were expected to be embedded in the "headers" template. Since that changeset, the content-type is supposed to be defined as the "mimetype" template in the map file. This changeset makes sure the old templates still work.

Merge with crew

test-convert-mtn: test directory move

convert: record deleted files in monotone source

update: better logic and messages for updates - complain about attempts to merge with ancestor - when updating, differentiate between - crossing named branches with no local changes (jump) - crossing named branches with local changes (complain) - nonlinear update on the same named branch, no changes (complain some more) - nonlinear update on the same named branch, changes (different complaining)

hgweb: fix breakage in python < 2.5 introduced in 2c370f08c486

setup.py: hide compiler error messages while searching for inotify

Add a test for monotone conversion

don't use hasattr in repo.invalidate hasattr ends up calling __getattr__ which will instantiate the very attributes we want to remove.

localrepo.commit: grab locks before getting the list of files to commit Somebody may change the dirstate after we've determined the parents of the working dir and run repo.status, but before we called wlock(). This should also fix issue997, where backout would change a file without changing its size and then call repo.commit without passing the list of files. If this happened in less than one second, we wouldn't detect any file changes - the in-memory dirstate still has the cached stat data for that file. Grabbing the wlock early causes the dirstate to be invalidated and we end up reading the dirstate file again, which has that file marked for lookup (size == -1). A better fix would be for backout to give repo.commit the exact list of files, but that'll require some changes to the revert operation. A significant user-visible change is that the precommit hook is always run with both locks grabbed - previously, hg commit would run it before grabbing any locks, but hg import would run it after grabbing locks.

Avoid calling heads() twice on every hg commit. In an extreme case (merging two revisions with very low revision numbers) this could be slower than the previous code, but it should be much faster in the usual cases (parents are near the tip). It also avoids some races in some uninteresting cases (e.g. two concurrent hg commits).

hgweb: better error messages

Remove unexpected "Alternately" word from tip help.

run-tests.py: Allow environment variables to set jobs/timeout/port.

convertrepo: make it work with refactored convert extension

Make tip help more helpful

test-imerge: test resolve subcommand

imerge: replace "merge" with "internal:merge" when non-interactive

hgk: display orphan revisions content (issue 1041)

test-mq-symlinks: skip if symlinks are not supported

test-notify: make it pass on Mac OS X 10.5

test-remove: make tests really pass Ah, the joys of cross-platform shell scripting...

test-remove: fix for non-gnu find

test-remove: make it pass on Mac OS X 10.5

tests: add highlight extension tests

tests: add tests for hgweb to test-keyword

Merge main and crew.

removed trailing spaces

ui: disallow newlines in usernames (issue1034)

update: no -C needed to switch branches without outstanding changes

coverage: deal with symlinked input paths (MacOSX issue) /tmp is symlinked in MacOSX therefore test scripts as well as python modules are installed in a symlinked location. coverage.py uses abspath() to normalize its inputs which fails if these are referencing real paths. Use realpath() instead.

Make churn an official extension

tiny tab cleanup

improved semantics for remove (issue438) - Added files are never deleted (only removed with --force). - Modified files can only be removed with --force. - With --after, only deleted files are removed. - With --after --force, all files are removed but not deleted.

test: fix mixing exec bit on test-hgwebdirsym

tests: make test-rebuildstate repeatable

tests: teach -i about fails list

tests: make test-convertcvs repeatable

test: Add tests for webdir symlinks and walkrepos.

mq: warn when applying a patch to somewhere other than tip

util: check fileno() validity in win32 set_binary()

clone: print "updating working directory" status message With this change, "hg clone" looks like this: % hg clone http://example.com/repo/big big requesting all changes adding changesets adding manifests adding file changes added XXX changesets with XXX changes to XXX files updating working directory XXX files updated, XXX files merged, XXX files removed, XXX files unresolved So the user sees % hg clone http://example.com/repo/big big requesting all changes adding changesets adding manifests adding file changes added XXX changesets with XXX changes to XXX files updating working directory while Mercurial is writing to disk to populate the working directory With this change, "hg clone" looks like this: % hg clone big big-work updating working directory XXX files updated, XXX files merged, XXX files removed, XXX files unresolved

give better error message on non-existent mapfile (issue813)

warn about new heads on commit (issue842)

hgweb: only accept POST requests for unbundle

tab/space cleanup

ui: copy overlay from both direct and indirect parentui

convert: allow missing tools not to stop source type detection

fix test-serve breakage for other hostnames

util: test fileno() availability in win32 set_binary() Fix suggested by Alexander Belchenko <bialix@ukr.net>

tests: fix repeatability for test-filebranch with dirstate granularity

tests: remove some unnecessary sleeps

dirstate: refactor granularity code, add a test - rename option dirstate.granularity - move option reading into .write() - add a simple test

dirstate: ignore stat data for files that were updated too recently This should fix the race where hg commit foo <change foo without changing its size> happens in the same second and status is fooled into thinking foo is clean. A configuration item is used to determine the timeout, since different filesystems may have different requirements (I think VFAT needs 3s, while most Unix filesystems are fine with 1s).

pager: remove pager code from core

pager: further simplify code, clean up comments

Use the pager given by the environment to display long output Unix systems usually have a PAGER environment variable set. If it is set, mercurial will use the pager application to display output. Two configuration variables are available to influence the behaviour of the pager: pager.application sets the application to be used pager.quiet silences Broken Pipe errors that might occur when the user quits the pager before mercurial finished to write the output

hgk: don't exit if mercurial commands only print warnings

tag: allow multiple tags to be added or removed - Example: "hg tag -r 42 build-25 beta-1" will add tags build-25 and beta-1 for rev 42. - The deprecated and undocumented usage "hg tag arg1 arg2" used to emit a warning, then add tag arg1 for rev arg2 (equivalent to "hg tag -r arg2 arg1"). It will now add tags arg1 and arg2 for the current revision. - If one tag triggers an error, no tags are added/removed (all or nothing).

tests: update test-command-template for the new {isodatesec} filter

Add an {isodatesec} template, to show seconds too.

convert: Add convert.cvsps option to set up an alternate cvsps command line.

hgwebdir: Tiny fix for webdir on non-symlink capable platforms.

Add tests for cloning from a all-history bundle

clone: use cancopy

Add ability to directly clone from all-history bundles bundlerepos can be used as clone src, even if CWD is not a repo

remoterepo: no longer needed All users already use repo.local() to test for local, which is false in the repository base class. statichttprepository never derived from this class anyway.

repo classes: remove unused dev() method

Add default local() and cancopy() methods to repository base class

make hgrc man page tell about ~/.hgrc on Windows

ui: make chuild ui feed output to parentui's active buffer

convert: fix test complaint for mtn bits

cleanup monotone conversion and use commandline class

initial version of monotone source for convert extension

notify: print diffstat even if maxline == 0

Make clear that for a changegroup '-r' pulls "up to" a revision If some better wording is found, it can be changed later.

two fixes for the pager stuff - open pipe in binary mode - don't start a pager if stdout is not a tty (this prevents test-ssh from hanging if you set ui.usepager=True in run-tests.py)

Use the pager given by the environment to display long output Unix systems usually have a PAGER environment variable set. If it is set, mercurial will use the pager application to display output. Two configuration variables are available to influence the behaviour of the pager. ui.pager sets the pager application. The pager is only used if ui.usepager is true. By default ui.usepager is disabled.

Fix thinko in test-inherit-mode If we don't change any rwx bit in the last test, hg will skip the calls to chmod since it'll assume they're not needed. This might fix things on BSD systems.

test-serve: replace copy/paste with shell function

revert: update state of files in the "checkout" list This can make a difference when there are filters involved and decode(encode(working-dir-data)) != working-dir-data even though encode(decode(repo-data)) == repo-data An example is a working dir file that uses only \n when you're using the win32text extension.

normallookup: during merges, restore the state saved by remove

dirstate.remove: during merges, remember the previous file state We encode the previous state as a negative file size (AFAICS, previous versions of hg always have size == 0 when state == 'r'). We save the state of 'm'erged and dirty files, because they're the two states that indicate that a file has to be committed on a merge to correctly record per-file history.

debugstate: add --nodates This can be useful for tests.

patch: fix corner case with update + copy patch handling (issue 937) The self patching of files when diffed with a backup is a bit peculiar to me. It makes sense in mpatch, that's less clear in mercurial patching code. Let's document and preserve it for now.

Merge

Backed out changeset 4b81eecc8aa2

Merge

Backed out changeset 91ac1726730a

Automated merge with http://hg.intevation.org/mercurial/crew

issue 1003: send all data properly

Remove unneeded "import os.path" again.

Spacing cleanup

filectx.ancestor: use fctx._repopath to cache filelogs (issue1035) _repopath may be different from _path for workingfilectx when there are renames involved.

Change User-agent field in client to have a lot more info.

Allow hgwebdir collections to follow symlinks.

Revert cfebb175704f, fixing the output of 2 tests

test-mv-cp-st-diff: avoid linkrev collisions The copy detection code relies heavily on the linkrevs, so it's better to avoid collisions in this test.

convert: avoid querying log of foreign svn branches Server configuration may prevent access to other branches, so don't even try to get them, instead of ignoring them afterwards.

patch: check filename is /dev/null for creation or deletion (issue 1033) Otherwise, file creation or deletion is ambiguous with file being filled or emptied.

update tests for copy detection changes

copies: add tests for status -C/diff --git This goes through 42 combinations of copy/rename branch/parent/working dir.

copies: deal with symmetric difference for linear relationships choose the minimum of symmetric difference and the two revs in question

status: find copies and renames beyond the working directory

diff: use copy smarts from copies.py

copies: move findcopies code to its own module - pass in contexts - fold symmetricdifference check into copies.copies

merge: move symmetricdifferences to ancestor.py

merge: simplify some helpers

merge: more simplifications to checkcopies

merge: simplify checkcopies

merge: privatize some functions, unnest some others

merge: notice uncommited copies (issue1000) As mentioned in msg5349 in issue988, "hg update" doesn't take into account uncommitted copies. To reproduce: ---------------- hg init repo cd repo touch foo hg ci -Am 'add foo' echo >> foo hg ci -m 'change foo' hg up -C 0 hg mv foo bar HGMERGE=false thg --debug -y update -------------------------- A similar problem happens with hg merge --force. I'm attaching a possible patch.

Check for patches repo with os.path.isdir not os.path.exists

hook.py: fix redirections introduced by 323b9c55b328 The only non-obvious part is the use of sys.{__stderr__,__stdout__}, which is needed because sshserver overrides sys.stdout. This makes a test that I added back in revision 7939c71f3132 ineffective.

Issue937: error messages from hooks not sent over HTTP. Turns out that stderr - where ui.warn would send messages - was not being proxied over the HTTP connection. stdout was, and it seems you need both. (The streams are interleaved for readability.) Tested on Ubuntu 7.10 with lighttpd on hgweb.cgi with HTTP Basic auth, no SSL, using a changeset failing win32text.forbidcrlf.

revlog.py: remove extra close() atomictempfile.rename() already calls close().

adjust test-http output to non-default HGPORT, e.g. with run-tests.py -j