patch: include flag-only file changes in "special" when filtering (issue5864) This patch fix the issue5864 (or maybe issue5865 too) which occurs during split (or I should say at the time of filtering the hunks in interactive mode) where user hits a not ending loop of "no changes to record". And it's not only the case for split it will happen in every interactive case for e.g. `hg commit -i` or `hg uncommit -i` After looking into code I found that when filtering we have some notation called "special" for the file headers which doesn't contain any hunk and just contain the header (for e.g. newly added empty file or deleted file) where the user cannot change the content of operation. And I think we can put this "flag-only" file change in that same bucket of "special". But I doubt a bit about the case when a file have flag change and atleast one hunk then user won't be able to separate the flag change from hunks. Changed test file reflect the fixed behaviour. Differential Revision: https://phab.mercurial-scm.org/D6058

store: error out if fncache does not ends with a newline If fncache does not ends with a newline, chunk will not be fully consumed. It should be a bug somewhere or the fncache is corrupted if that happens. Let's error out in such cases. Differential Revision: https://phab.mercurial-scm.org/D6148

tracked: add documentation about `--import-rules` flag The documentation is inspired from the `--import-rules` flag of hg debugsparse command. Differential Revision: https://phab.mercurial-scm.org/D6150

discovery: fix embarrassing typo in slice definition The code introduced in e514799e4e07 ended up having a silly bug. The indexing selected a single item slice picking only p1. The discovery result was still correct, but the sampling was hampered, sometime leading to much more round trips being performed. Fixing this issue restore the previous sampling behavior. This fix has a negative performance impact on the pathological case the previous test has been built. # parent of this changesets ! wall 5.313884 comb 5.310000 user 5.260000 sys 0.050000 (best of 5) ! wall 6.711860 comb 6.710000 user 6.670000 sys 0.040000 (max of 5) ! wall 5.844016 comb 5.842000 user 5.784000 sys 0.058000 (avg of 5) ! wall 5.778635 comb 5.780000 user 5.740000 sys 0.040000 (median of 5) # With this changesets. ! wall 6.350879 comb 6.350000 user 6.300000 sys 0.050000 (best of 5) ! wall 6.653647 comb 6.660000 user 6.480000 sys 0.180000 (max of 5) ! wall 6.492762 comb 6.494000 user 6.414000 sys 0.080000 (avg of 5) ! wall 6.547577 comb 6.550000 user 6.490000 sys 0.060000 (median of 5) Changeset e514799e4e07 raised the question of using the "_uncheckedparentrevs" instead of the current code. So I ran comparative timing: # old code: 55919b96c02a (e514799e4e07 parent) ! wall 64.078708 comb 64.080000 user 63.160000 sys 0.920000 (best of 5) ! wall 68.296300 comb 68.290000 user 67.410000 sys 0.880000 (max of 5) ! wall 65.899075 comb 65.894000 user 65.082000 sys 0.812000 (avg of 5) ! wall 66.140286 comb 66.130000 user 65.330000 sys 0.800000 (median of 5) # buggy code: e514799e4e07 ! wall 46.605362 comb 46.610000 user 45.880000 sys 0.730000 (best of 5) ! wall 48.619659 comb 48.620000 user 47.890000 sys 0.730000 (max of 5) ! wall 47.350247 comb 47.350000 user 46.672000 sys 0.678000 (avg of 5) ! wall 46.983224 comb 46.980000 user 46.350000 sys 0.630000 (median of 5) # fixed code: e514799e4e07 with this fix ! wall 55.858460 comb 55.850000 user 55.090000 sys 0.760000 (best of 5) ! wall 59.048805 comb 59.060000 user 58.110000 sys 0.950000 (max of 5) ! wall 57.192639 comb 57.192000 user 56.350000 sys 0.842000 (avg of 5) ! wall 57.056373 comb 57.060000 user 56.160000 sys 0.900000 (median of 5) # version using uncheckedparents ! wall 56.471916 comb 56.470000 user 55.630000 sys 0.840000 (best of 5) ! wall 58.228793 comb 58.230000 user 57.600000 sys 0.630000 (max of 5) ! wall 57.377583 comb 57.378000 user 56.674000 sys 0.704000 (avg of 5) ! wall 57.008843 comb 57.010000 user 56.330000 sys 0.680000 (median of 5) So it looks like the overhead from `_uncheckedparentrevs` is not that impactful. I'll investigate this shortly. I'm almost done updating our benchmark suite with more meaningful discovery cases.

store: don't read the whole fncache in memory In large repositories with lot of files, the fncache grows more than 100 MB and reading that whole thing into memory slows things down. Let's not read the whole thing into memory. This patch changes fncache loading code to read 1 MB at once. Loading 1 MB at once saves ~1 sec on perffncacheload for our internal repository. I tried various values such as 0.5 MB, 5 MB, 10 MB but best results were produced using 1 MB as the chunksize. On a narrow clone with fncache around 40 MB, this patch saves ~0.04 seconds on average on perffncacheload. To test the code, I have coded an extension in test-fncache.t which set chunksize to 1 byte, and the test passes with that. Differential Revision: https://phab.mercurial-scm.org/D5296

record: prevent commits that don't pick up dirty subrepo changes (issue6102) This path covers interactive mode for commit, amend, and shelve, as well as the deprecated record extension. Since shelf creation uses commit without -S in the non-interactive case, aborting here should be OK. (I didn't check what happens to non interactive shelve creation if `ui.commitsubrepos=True` is set.) subrepoutil.precommit() will abort on a dirty subrepo if the config option isn't set, but the hint recommends using --subrepos to commit. Since only the commit command currently supports that option, the error has to be raised here to omit the hint. Doing the check before asking about all of the hunks in the MQ test seems like an improvement on its own. There's probably an additional check on this path that can be removed.

wix: restore COPYING.rtf 8427fea04017 accidentally blew away the content of this file. As part of restoring the content, I updated the copyright year to 2019. Differential Revision: https://phab.mercurial-scm.org/D6098

test-https: add some more known failure messages of client certs (issue6030) I don't think the exact error message is important here. On Debian sid, ECONNRESET is raised, and "[SSL] tlsv13 alert certificate required" on NetBSD.

test-https: turn off system OpenSSL configuration This mostly fixes the test failure on Debian sid where TLS 1.0 and 1.1 are disabled by default. https://sources.debian.org/patches/openssl/1.1.1a-1/Set-systemwide-default-settings-for-libssl-users.patch/ $OPENSSL_CONF could be set by run-tests.py, but the other tests should work without a "legacy" TLS, so I decided to not.

store: move logic to check for invalid entry in fncache to own function This helps separate the original reading logic from the one which finds for an invalid entry. Differential Revision: https://phab.mercurial-scm.org/D6030

py3: add test-phabricator.py to python3-whitelist Differential Revision: https://phab.mercurial-scm.org/D6114

py3: convert to/from bytes/unicode for json.(dump|load)s in debugcallconduit Differential Revision: https://phab.mercurial-scm.org/D6113

py3: use pycompat.byteskwargs on opts in phabricator.py Differential Revision: https://phab.mercurial-scm.org/D6107

watchman: ignore some of watchman errors Don't display 'illegal_fstypes' errors. In environments with network filesystems, the error messages are quickly pilling up and polluting outputs. Differential Revision: https://phab.mercurial-scm.org/D5955

watchman: add the possibility to set the exact watchman binary location This is necessary to make rolling releases of new watchman versions across users. Differential Revision: https://phab.mercurial-scm.org/D5954

context: use wdirhex constant instead of calculating it Differential Revision: https://phab.mercurial-scm.org/D6143

split: use the new movedirstate() we now have in scmutil This avoids unnecessarily touching the working copy when splitting the parent of the working copy. That also makes the test-removeemptydirs.t case invalid, so we can just delete it. Differential Revision: https://phab.mercurial-scm.org/D6127

manifestcache: use `wcache` directory for manifest cache The manifest full text cache is tightly related to the working copy. We should use the `wcache` directory for it, instead of the `cache`. Otherwise, multiple shares would keep overwriting each other cache entry and we loose its benefit. This is also more consistent with the fact this cache file is protected by `wlock`.

manifestcache: protect write with `wlock` instead of `lock` The `wlock` is taken by both `update` and `commit` type operation. This would help persisting the cache more aggressively. An explicit test is introduced. However, we can already see the effect of this change on earlier test output.

manifestcache: clear the cache before testing the debug command Right now the cache is empty before this section of the test. However, we are about to improve the persistence of the cache (putting it under `wllock`, intead of `lock`). So we install the cleanup before.

manifestcache: abstract the filename in a class attribute This make the code clearer and simpler to update.

manifestcache: skip setup earlier if we don't have the lock There a no point preparing a closure if we are not going to use it.

manifestcache: test the cache is warm after a commit

manifestcache: stop altering the lru cache order while displaying it Accessing value with `.get` alter the iteration order and make the output of the debug command misbehave, showing multiple entry twice. We need more than 2 entry to see the bug, so there are not test change. Later test will introduce a third entry and would fail without this fix.

manifestcache: support multiple cache addition in one debug command run This is more practical.

wix: autogenerate wxs file for library files Currently, dist.wxs contains an enumeration of .pyd and .dll files staged to dist/lib by py2exe. Having a manual list of files is error prone, as things can easily get out of sync (as the previous commit demonstrates). This is especially an issue for TortoiseHG, which ships a number of custom modules, which may pull in additional dependencies. Let's prevent this problem from manifesting by dynamically generating a .wxs file containing the .pyd and .dll files staged by py2exe. Differential Revision: https://phab.mercurial-scm.org/D6139

wix: introduce variable to hold path to wix packaging directory For convenience. Differential Revision: https://phab.mercurial-scm.org/D6138

wix: package missing .dll and .pyd files dist.wxs is currently missing some .pyd and .dll files which are picked up and staged by py2exe. This means that the WiX installer is missing some Python extension modules and their dependencies which are referenced by Mercurial or a Python package distributed with it. This commit adds the missing files to the WiX installer. Differential Revision: https://phab.mercurial-scm.org/D6137

setup: exclude crypt32.dll in py2exe builds py2exe is picking up crypt32.dll as a dependency and is including the DLL in the dist/lib directory, where it can get picked up by an installer and distributed. crypt32.dll is a core Windows DLL since Windows XP. We don't need to distribute it. Differential Revision: https://phab.mercurial-scm.org/D6136

packaging: don't bundle DLLs in py2exe library.zip for x86 builds I had ported the x86/x64 behavior difference from the Inno Setup installer files. Why things were this way, I'm not sure. The WiX configuration files are expecting to have standalone DLL files for both configurations. And the 32-bit WiX installers were broken due to missing DLLs. Let's standardize on standalone DLL files on all configurations for consistency. I /think/ this will be faster, as I /think/ py2exe binaries would have to extract the DLL to a temporary file in order to load it. But I'm not 100% sure about that. Differential Revision: https://phab.mercurial-scm.org/D6135

packaging: convert files to LF My editor accidentally wrote CRLF line endings because I authored this code on Windows. Derp. I'm kinda surprised no linters caught this... # no-check-commit to avoid false positive for foo_bar names Differential Revision: https://phab.mercurial-scm.org/D6134

dirstate: remove obsolete reference to dirstate.beginparentchange The only valid API since 265e91da56fd (dirstate: drop deprecated methods (API), 2018-02-02) is the context manager returned from dirstate.parentchange(). Differential Revision: https://phab.mercurial-scm.org/D6126

py3: use pycompat.iterbytestr to convert memoryview slice to bytestring Otherwise ch is the int value of the byte in py3 rather than the actual character. Differential Revision: https://phab.mercurial-scm.org/D6103

rebase: fix crash with in-memory rebase and copies When using regular on-disk rebase, filectx.markcopies() calls to dirstate.copy(), which happily records the copy. Then it's simply ignored if it doesn't matter for the commit (as in the test case I added in the previous patch). Let's do the same for overlayworkingctx. Differential Revision: https://phab.mercurial-scm.org/D6133

test: demonstrate crash with in-memory rebase and copies In the added test case, there is a merge commit that has one obsolete parent with a rename. Since the rename is not in the other parent, pathcopies() from that other parent will include the copy. Then when we try to rebase this merge commit onto another commit that has the same content changes, but no tracking of the rename (because it was done with "hg remove; hg add" instead of "hg mv"), we try to propagate the copy information. That fails because overlayworkingctx expects a file to be modified if it's going to have copy information. Differential Revision: https://phab.mercurial-scm.org/D6132

manifestcache: actually honor --clear Before this change, the --clear flag was not clearing the on disk cache. (We also remove the extra verbosity when using --clear. Same as what we did for --add)

manifestcache: make sure the entry are ordered by access time This is an LRU cache, let us make sure of that.

manifestcache: adding a second distinct entry Let makes sure the cache can hold multiple value.

manifestcache: test that adding the same entry twice do not duplicates it Simple sanity check.

manifestcache: do not display data when using --add If the command invocation is about adding a new entry, we should remain terse (the same as we do for many commands).

manifestcache: only lock the repository if the debug command touch the cache Not doing so had two consequences: 1) the command cannot be run on read only repositories, 2) when using --add on an empty cache, the command crash prematurely trying to read the cache file on disk.

manifestcache: further fix to debug command output Removing more capital letters. The output will get a test once other issues get fixed.

manifestcache: test and fix some output of the debug command The message was lacking an end of line. In addition we do not capitalize output in Mercurial.

chunkselector: fix typos in instructions when user reviews patch Differential Revision: https://phab.mercurial-scm.org/D6121

scmutil: document matcher argument of movedirstate() Differential Revision: https://phab.mercurial-scm.org/D6120

uncommit: move _movedirstate() to scmutil for reuse The function should be applicable generically when moving from one commit to another. I'll try to add more callers when I find time. I'm not convinced it's handling all the cases correctly, but we should have a generic function for this kind of operation, so I think it belongs somewhere in core (not in the uncommit extension). Differential Revision: https://phab.mercurial-scm.org/D6119

copies: remove dependency on scmutil by directly using match.exact() I want to add a dependency from scmutil.copies(), so I need to remove this dependency first. Differential Revision: https://phab.mercurial-scm.org/D6118

uncommit: convert _fixdirstate() into _movedirstate() _fixdirstate() already also updates to the given commit, so let's rename it to _movedirstate(). Also update the documentation and drop the unnecessary "curctx" argument, since that should always be repo['.']. Differential Revision: https://phab.mercurial-scm.org/D6117