sslutil: capture string string representation of protocol This will be used in a subsequent patch to improve messaging.

sslutil: allow TLS 1.0 when --insecure is used --insecure is our psuedo-supported footgun for disabling connection security. The flag already disables CA verification. I think allowing the use of TLS 1.0 when specified is appropriate.

hg: copy [hostsecurity] options to remote ui instances (issue5305) TIL that ui instances for remote/peer repos don't automagically inherit config options from .hg/hgrc files. This patch makes remote ui instances inherit options from the [hostsecurity] section. We were already inheriting options from [hostfingerprints] and [auth]. So adding [hostsecurity] to the list seems appropriate.

rbc: fix superfluous rebuilding from scratch - don't abuse self._rbcnamescount The code used self._rbcnamescount as if it was the length of self._names ... but actually it is just the number of good entries on disk. This caused the cache to be populated inefficiently. In some cases very inefficiently. Instead of checking the length before lookup, just try a lookup in self._names - that is also in most cases faster. Comments and debug messages are tweaked to help understanding the issue and the fix.

rbc: test case for incorrect and too aggressive invalidation of invalid caches

util: better handle '-' in version string (issue5302) versiontuple() was previously only splitting on '+' and strings like "3.9-rc" were causing it to misreport the version as (3, None). By splitting on either '+' or '-' we can handle our version strings with "-rc" in them.

convert: update use of deprecated bzrlib property The inventory property was deprecated in favor of root_inventory in bzr 2.5.0. Current version is 2.7.0. I noticed this when testing locally on Python 2.6.9, which has warnings turned on by default. The failure that occurs without this patch can be seen on Python 2.7 by running with warnings enabled: $ PYTHONWARNINGS=::DeprecationWarning make 'test-convert-bzr*'

hghave: fix typo of sslutil.supportedprotocols

rebase: turn rebase revs into set before filtering obsolete When the inhibit extension from mutable-history is enabled, it attempts to iterate over the rebaseset to prevent the nodes being rebased from being marked obsolete. This happens at the same time as rebase's _filterobsoleterevs function trying to iterate over the rebaseset to figure out which ones are obsolete. The two of these iterating over the same revset generatorset cause a 'generator already executing' exception. This is probably a flaw in the revset implementation, since iterating over the same set twice should be supported. This regression was introduced in 5d16ebe7b14, since it changed _filterobsoleterevs to be called before the rebaseset was turned into a set(). For now let’s just make the rebaseset an actual set again before calling that function. This was caught by the inhibit tests. The relevant call stack from test-inhibit.t: File "/tmp/hgtests.jgjrN5/install/lib/python/hgext/rebase.py", line 285, in _preparenewrebase obsrevs = _filterobsoleterevs(self.repo, rebaseset) File "/data/hgbuild/facebook-hg-rpms/mutable-history/hgext/inhibit.py", line 197, in _filterobsoleterevswrap r = orig(repo, rebasesetrevs, *args, **kwargs) File "/tmp/hgtests.jgjrN5/install/lib/python/hgext/rebase.py", line 1380, in _filterobsoleterevs return set(r for r in revs if repo[r].obsolete()) File "/tmp/hgtests.jgjrN5/install/lib/python/hgext/rebase.py", line 1380, in <genexpr> return set(r for r in revs if repo[r].obsolete()) File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3079, in _iterordered val2 = next(iter2) File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3417, in gen yield nextrev() File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3424, in _consumegen for item in self._gen: File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 71, in iterate cl = repo.changelog File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 319, in changelog revs = filterrevs(unfi, self.filtername) File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 261, in filterrevs repo.filteredrevcache[filtername] = func(repo.unfiltered()) File "/data/hgbuild/facebook-hg-rpms/mutable-history/hgext/directaccess.py", line 65, in _computehidden hidden = repoview.filterrevs(repo, 'visible') File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 261, in filterrevs repo.filteredrevcache[filtername] = func(repo.unfiltered()) File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 175, in computehidden hideable = hideablerevs(repo) File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/repoview.py", line 33, in hideablerevs return obsolete.getrevs(repo, 'obsolete') File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/obsolete.py", line 1097, in getrevs repo.obsstore.caches[name] = cachefuncs[name](repo) File "/data/hgbuild/facebook-hg-rpms/mutable-history/hgext/inhibit.py", line 255, in _computeobsoleteset if getrev(n) not in blacklist: File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3264, in __contains__ return x in self._r1 or x in self._r2 File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3348, in __contains__ for l in self._consumegen(): File "/tmp/hgtests.jgjrN5/install/lib/python/mercurial/revset.py", line 3424, in _consumegen for item in self._gen: ValueError: generator already executing

commandserver: update comment about setpgid Now setpgid has 2 main purposes: better handling for terminal-generated SIGTSTP, SIGINT, and process-exit-generated SIGHUP. Update the comment to explain things more clearly.

chg: forward SIGINT, SIGHUP to process group These signals are meant to send to a process group, instead of a single process: SIGINT is usually emitted by the terminal and sent to the process group. SIGHUP usually happens to a process group if termination of a process causes that process group to become orphaned. Before this patch, chg will only forward these signals to the single server process. This patch changes it to the server process group. This will allow us to properly kill processes started by the forked server process, like a ssh process. The behavior difference can be observed by setting SSH_ASKPASS to a dummy script doing "sleep 100" and then run "chg push ssh://dest-need-password-auth". Before this patch, the first Ctrl+C will kill the hg process while ssh-askpass and ssh will remain alive. This patch will make sure they are killed properly.

Added signature for changeset 519bb4f9d3a4

Added tag 3.9-rc for changeset 519bb4f9d3a4

merge default into stable for 3.9 code freeze

rbc: fix invalid rbc-revs entries caused by missing cache growth It was in some cases possible to end up writing to the cache file without growing it first. The range assignment in _setcachedata would append instead of writing at the requested position and thus write the new record in the wrong place. To fix this, we avoid looking up in too small caches, and when growing the cache, do it right before writing the new record to it so we know it has been done correctly.

rbc: test case for cache file not growing correctly, causing bad new entries

chg: handle EOF reading data block We recently discovered a case in production that chg uses 100% CPU and is trying to read data forever: recvfrom(4, "", 1814012019, 0, NULL, NULL) = 0 Using gdb, apparently readchannel() got wrong data. It was reading in an infinite loop because rsize == 0 does not exit the loop, while the server process had ended. (gdb) bt #0 ... in recv () at /lib64/libc.so.6 #1 ... in readchannel (...) at /usr/include/bits/socket2.h:45 #2 ... in readchannel (hgc=...) at hgclient.c:129 #3 ... in handleresponse (hgc=...) at hgclient.c:255 #4 ... in hgc_runcommand (hgc=..., args=<optimized>, argsize=<optimized>) #5 ... in main (argc=...486922636, argv=..., envp=...) at chg.c:661 (gdb) frame 2 (gdb) p *hgc $1 = {sockfd = 4, pid = 381152, ctx = {ch = 108 'l', data = 0x7fb05164f010 "st):\nTraceback (most recent call last):\n" "Traceback (most recent call last):\ne", maxdatasize = 1814065152," " datasize = 1814064225}, capflags = 16131} This patch addresses the infinite loop issue by detecting continuously empty responses and abort in that case. Note that datasize can be translated to ['l', ' ', 'l', 'a']. Concatenate datasize and data, it forms part of "Traceback (most recent call last):". This may indicate a server-side channeledoutput issue. If it is a race condition, we may want to use flock to protect the channels.

sslutil: more robustly detect protocol support The Python ssl module conditionally sets the TLS 1.1 and TLS 1.2 constants depending on whether HAVE_TLSv1_2 is defined. Yes, these are both tied to the same constant (I would think there would be separate constants for each version). Perhaps support for TLS 1.1 and 1.2 were added at the same time and the assumption is that OpenSSL either has neither or both. I don't know. As part of developing this patch, it was discovered that Apple's /usr/bin/python2.7 does not support TLS 1.1 and 1.2 (only TLS 1.0)! On OS X 10.11, Apple Python has the modern ssl module including SSLContext, but it doesn't appear to negotiate TLS 1.1+ nor does it expose the constants related to TLS 1.1+. Since this code is doing more robust feature detection (and not assuming modern ssl implies TLS 1.1+ support), we now get TLS 1.0 warnings when running on Apple Python. Hence the test changes. I'm not super thrilled about shipping a Mercurial that always whines about TLS 1.0 on OS X. We may want a follow-up patch to suppress this warning.

osutil: add darwin-only version of os.listdir using cffi

url: drop support for proxying HTTP (not HTTPS) over CONNECT tunneling It's been broken since cca59ef27e60, which made ui argument mandatory. I've tried several combinations of HTTP/HTTPS proxying on old/new Python versions, but I couldn't figure out how to reach this code path. Also, wrapping HTTP connection by SSLSocket seems wrong. My understanding is that self.realhostport is set by _generic_start_transaction() if HTTPS connection is tunneled. This patch removes proxy tunneling from httpconnection.connect() assuming that it was dead code from the beginning. Note that HTTPS over tunneling should be handled by httpsconnection class.

chgserver: rename private functions and variables of chgunixservicehandler self.address has been reanmed to self._realaddress to clarify that it can be different from the address argument.

chgserver: refactor initialization of real/base addresses Instead of overwriting self.address, calculate it from the address argument, which is the base address.

chgserver: reorder functions in chgunixservicehandler This should make it slightly easier to follow the call path.

chgserver: use ui.debug() to print server debug messages commandserver.log() is noop at this time because no client connection is established.

ssl: remove special case of web.cacerts=! from remoteui() It was introduced by b76d8c641746, which is no longer necessary thanks to recent refactoring of sslutil including ef316c653b7f.

bundle2: store changeset count when creating file bundles The bundle2 changegroup part has an advisory param saying how many changesets are in the part. Before this patch, we were setting this part when generating bundle2 parts via the wire protocol but not when generating local bundle2 files. A side effect of not setting the changeset count part is that progress bars don't work when applying changesets. As the tests show, this impacted clone bundles, shelve, backup bundles, `hg unbundle`, and anything touching bundle2 files. This patch adds a backdoor to allow us to pass state from changegroup generation into the unbundler. We store the number of changesets in the changegroup in this state and use it to populate the aforementioned advisory part parameter when generating the bundle2 bundle. I concede that I'm not thrilled by how state is being passed in changegroup.py (it feels a bit hacky). I would love to overhaul the rather confusing set of functions in changegroup.py with something that passes rich objects around instead of e.g. low-level generators. However, given the code freeze for 3.9 is imminent, I'd rather not undertake this endeavor right now. This feels like the easiest way to get the parameter added to the changegroup part.

util: implement a deterministic __repr__ on sortdict `hg debugbundle` is calling repr() on bundle2 part params, which are now util.sortdict instances. Unfortunately, repr() doesn't appear to be deterministic for util.sortdict. So, we implement one. We include the type name because that's the common convention for __repr__ implementations. Having the type name in `hg debugbundle` is a bit ugly. But it's a debug command and I don't care enough to fix it.

bundle2: use a sorted dict for holding parameters An upcoming change that introduces a 2nd part parameter to a part reveals that `hg debugbundle` isn't deterministic because parameters are stored on n plain, unsorted dict. While we could change that command to sort before output, I think the more important underlying issue is that bundle2 reading is taking an ordered data structure and converting it to an unordered one. Plugging in util.sortdict() fixes that problem while preserving API compatibility. This patch also appears to shine light on the fact that we don't have tests verifying parts with multiple parameters roundtrip correctly. That would be a good thing to test (and fuzz)... someday.

wireproto: extract repo filtering to standalone function As part of teaching Mozilla's replication extension to better handle repositories with obsolescence data, I encountered a few scenarios where I wanted built-in wire protocol commands from replication clients to operate on unfiltered repositories so they could have access to obsolete changesets. While the undocumented "web.view" config option provides a mechanism to choose what filter/view hgweb operates on, this doesn't apply to wire protocol commands because wireproto.dispatch() is always operating on the "served" repo. This patch extracts the line for obtaining the repo that wireproto commands operate on to its own function so extensions can monkeypatch it to e.g. return an unfiltered repo. I stopped short of exposing a config option because I view the use case for changing this as a niche feature, best left to the domain of extensions.

url: add distribution and version to user-agent request header (BC) As a server operator, I've always wanted to know what Mercurial version clients are running so I can track version adoption and make informed decisions about which versions of Mercurial to support in extensions. Unfortunately, there is no easy way to discern this today: the best you can do is look for high-level feature usage (e.g. bundle2) or sniff capabilities from bundle2 commands. And these things aren't changed frequently enough to tell you anything that interesting. Nearly every piece of software talking HTTP sends its version in the user agent. This includes web browsers, curl, and even Git. This patch adds the distribution name and version to the user-agent HTTP request header. We choose "Mercurial" for the distribution name because that seems appropriate. The version string comes from __version__. The value is inside parenthesis for a few reasons: * The version *may* contain spaces * Alternate forms like "Mercurial/<version>" imply structure and since the user agent should not be used by servers for protocol or feature negotiation/detection, we don't want to even give the illusion that the value should be parsed. A free form field is the most hostile to parsing. Flagging the patch as BC so it shows up in release notes. This change should be backwards compatible. But I wouldn't be surprised if a server somewhere is filtering on the exact old user agent string. So I want to make noise about this change.