clone: disable stream support on server side by default.
enable in hgrc like this:
[server]
stream=True
--- a/doc/hgrc.5.txt Sat Jul 15 16:06:05 2006 -0700
+++ b/doc/hgrc.5.txt Sat Jul 15 16:06:35 2006 -0700
@@ -317,7 +317,7 @@
Assigns symbolic names to repositories. The left side is the
symbolic name, and the right gives the directory or URL that is the
location of the repository. Default paths can be declared by
- setting the following entries.
+ setting the following entries.
default;;
Directory or URL to use when pulling if no source is specified.
Default is set to repository from which the current repository
@@ -326,6 +326,18 @@
Optional. Directory or URL to use when pushing if no destination
is specified.
+server::
+ Controls generic server settings.
+ stream;;
+ Whether to allow clients to clone a repo using the uncompressed
+ streaming protocol. This transfers about 40% more data than a
+ regular clone, but uses less memory and CPU on both server and
+ client. Over a LAN (100Mbps or better) or a very fast WAN, an
+ uncompressed streaming clone is a lot faster (~10x) than a regular
+ clone. Over most WAN connections (anything slower than about
+ 6Mbps), uncompressed streaming is slower, because of the extra
+ data transfer overhead. Default is False.
+
ui::
User interface controls.
debug;;
--- a/mercurial/hg.py Sat Jul 15 16:06:05 2006 -0700
+++ b/mercurial/hg.py Sat Jul 15 16:06:35 2006 -0700
@@ -97,7 +97,8 @@
pull: always pull from source repository, even in local case
- stream: stream from repository (fast over LAN, slow over WAN)
+ stream: stream raw data uncompressed from repository (fast over
+ LAN, slow over WAN)
rev: revision to clone up to (implies pull=True)
--- a/mercurial/hgweb/hgweb_mod.py Sat Jul 15 16:06:05 2006 -0700
+++ b/mercurial/hgweb/hgweb_mod.py Sat Jul 15 16:06:35 2006 -0700
@@ -860,7 +860,10 @@
or self.t("error", error="%r not found" % fname))
def do_capabilities(self, req):
- resp = 'unbundle stream=%d' % (self.repo.revlogversion,)
+ caps = ['unbundle']
+ if self.repo.ui.configbool('server', 'stream'):
+ caps.append('stream=%d' % self.repo.revlogversion)
+ resp = ' '.join(caps)
req.httphdr("application/mercurial-0.1", length=len(resp))
req.write(resp)
--- a/mercurial/localrepo.py Sat Jul 15 16:06:05 2006 -0700
+++ b/mercurial/localrepo.py Sat Jul 15 16:06:35 2006 -0700
@@ -2204,8 +2204,11 @@
return 1
def stream_in(self, remote):
+ fp = remote.stream_out()
+ resp = int(fp.readline())
+ if resp != 0:
+ raise util.Abort(_('operation forbidden by server'))
self.ui.status(_('streaming all changes\n'))
- fp = remote.stream_out()
total_files, total_bytes = map(int, fp.readline().split(' ', 1))
self.ui.status(_('%d files to transfer, %s of data\n') %
(total_files, util.bytecount(total_bytes)))
@@ -2230,14 +2233,15 @@
keyword arguments:
heads: list of revs to clone (forces use of pull)
- pull: force use of pull, even if remote can stream'''
+ stream: use streaming clone if possible'''
- # now, all clients that can stream can read repo formats
- # supported by all servers that can stream.
+ # now, all clients that can request uncompressed clones can
+ # read repo formats supported by all servers that can serve
+ # them.
# if revlog format changes, client will have to check version
- # and format flags on "stream" capability, and stream only if
- # compatible.
+ # and format flags on "stream" capability, and use
+ # uncompressed only if compatible.
if stream and not heads and remote.capable('stream'):
return self.stream_in(remote)
--- a/mercurial/sshserver.py Sat Jul 15 16:06:05 2006 -0700
+++ b/mercurial/sshserver.py Sat Jul 15 16:06:35 2006 -0700
@@ -60,8 +60,10 @@
capabilities: space separated list of tokens
'''
- r = "capabilities: unbundle stream=%d\n" % (self.repo.revlogversion,)
- self.respond(r)
+ caps = ['unbundle']
+ if self.ui.configbool('server', 'stream'):
+ caps.append('stream=%d' % self.repo.revlogversion)
+ self.respond("capabilities: %s\n" % (' '.join(caps),))
def do_lock(self):
'''DEPRECATED - allowing remote client to lock repo is not safe'''
--- a/mercurial/streamclone.py Sat Jul 15 16:06:05 2006 -0700
+++ b/mercurial/streamclone.py Sat Jul 15 16:06:35 2006 -0700
@@ -59,6 +59,13 @@
def stream_out(repo, fileobj):
'''stream out all metadata files in repository.
writes to file-like object, must support write() and optional flush().'''
+
+ if not repo.ui.configbool('server', 'stream'):
+ fileobj.write('1\n')
+ return
+
+ fileobj.write('0\n')
+
# get consistent snapshot of repo. lock during scan so lock not
# needed while we stream, and commits can happen.
lock = repo.lock()
--- a/tests/test-http Sat Jul 15 16:06:05 2006 -0700
+++ b/tests/test-http Sat Jul 15 16:06:35 2006 -0700
@@ -1,23 +1,23 @@
#!/bin/sh
-mkdir test
+hg init test
cd test
echo foo>foo
-hg init
-hg addremove
-hg commit -m 1
-hg verify
-hg serve -p 20059 -d --pid-file=hg.pid
-cat hg.pid >> $DAEMON_PIDS
+hg commit -A -d '0 0' -m 1
+hg --config server.stream=True serve -p 20059 -d --pid-file=hg1.pid
+cat hg1.pid >> $DAEMON_PIDS
+hg serve -p 20060 -d --pid-file=hg2.pid
+cat hg2.pid >> $DAEMON_PIDS
cd ..
echo % clone via stream
-http_proxy= hg clone --stream http://localhost:20059/ copy 2>&1 | \
+http_proxy= hg clone --uncompressed http://localhost:20059/ copy 2>&1 | \
sed -e 's/[0-9][0-9.]*/XXX/g'
cd copy
hg verify
-cd ..
+echo % try to clone via stream, should use pull instead
+http_proxy= hg clone --uncompressed http://localhost:20060/ copy2
echo % clone via pull
http_proxy= hg clone http://localhost:20059/ copy-pull
--- a/tests/test-http-proxy Sat Jul 15 16:06:05 2006 -0700
+++ b/tests/test-http-proxy Sat Jul 15 16:06:35 2006 -0700
@@ -4,7 +4,7 @@
cd a
echo a > a
hg ci -Ama -d '1123456789 0'
-hg serve -p 20059 -d --pid-file=hg.pid
+hg --config server.stream=True serve -p 20059 -d --pid-file=hg.pid
cat hg.pid >> $DAEMON_PIDS
cd ..
@@ -14,7 +14,7 @@
sleep 2
echo %% url for proxy, stream
-http_proxy=http://localhost:20060/ hg --config http_proxy.always=True clone --stream http://localhost:20059/ b | \
+http_proxy=http://localhost:20060/ hg --config http_proxy.always=True clone --uncompressed http://localhost:20059/ b | \
sed -e 's/[0-9][0-9.]*/XXX/g'
cd b
hg verify
--- a/tests/test-http.out Sat Jul 15 16:06:05 2006 -0700
+++ b/tests/test-http.out Sat Jul 15 16:06:35 2006 -0700
@@ -1,10 +1,4 @@
-(the addremove command is deprecated; use add and remove --after instead)
adding foo
-checking changesets
-checking manifests
-crosschecking files in changesets and manifests
-checking files
-1 files, 1 changesets, 1 total revisions
% clone via stream
streaming all changes
XXX files to transfer, XXX bytes of data
@@ -15,6 +9,13 @@
crosschecking files in changesets and manifests
checking files
1 files, 1 changesets, 1 total revisions
+% try to clone via stream, should use pull instead
+requesting all changes
+adding changesets
+adding manifests
+adding file changes
+added 1 changesets with 1 changes to 1 files
+1 files updated, 0 files merged, 0 files removed, 0 files unresolved
% clone via pull
requesting all changes
adding changesets
--- a/tests/test-ssh Sat Jul 15 16:06:05 2006 -0700
+++ b/tests/test-ssh Sat Jul 15 16:06:35 2006 -0700
@@ -27,11 +27,13 @@
cd remote
echo this > foo
hg ci -A -m "init" -d "1000000 0" foo
+echo '[server]' > .hg/hgrc
+echo 'stream = True' >> .hg/hgrc
cd ..
echo "# clone remote via stream"
-hg clone -e ./dummyssh --stream ssh://user@dummy/remote local-stream 2>&1 | \
+hg clone -e ./dummyssh --uncompressed ssh://user@dummy/remote local-stream 2>&1 | \
sed -e 's/[0-9][0-9.]*/XXX/g'
cd local-stream
hg verify