changeset 44341:77bb38be00ea

rebase: always be graft-like, not merge-like, also for merges Rebase works by updating to a commit and then grafting changes on top. However, before this patch, it would actually merge in changes instead of grafting them in in some cases. That is, it would use the common ancestor as base instead of using one of the parents. That seems wrong to me, so I'm changing it so `defineparents()` always returns a value for `base`. This fixes the bad behavior in test-rebase-newancestor.t, which was introduced in 65f215ea3e8e (tests: add test for rebasing merges with ancestors of the rebase destination, 2014-11-30). The difference in test-rebase-dest.t is because the files in the tip revision were A, D, E, F before this patch and A, D, F, G after it. I think both files should ideally be there. Differential Revision: https://phab.mercurial-scm.org/D7907
author Martin von Zweigbergk <martinvonz@google.com>
date Thu, 16 Jan 2020 00:03:19 -0800
parents 6ecc34b31137
children 7f7c8521e9bd
files hgext/rebase.py tests/test-rebase-dest.t tests/test-rebase-newancestor.t
diffstat 3 files changed, 37 insertions(+), 96 deletions(-) [+]
line wrap: on
line diff
--- a/hgext/rebase.py	Wed Jan 15 15:51:01 2020 +0100
+++ b/hgext/rebase.py	Thu Jan 16 00:03:19 2020 -0800
@@ -1678,22 +1678,6 @@
             elif p in state and state[p] > 0:
                 np = state[p]
 
-            # "bases" only record "special" merge bases that cannot be
-            # calculated from changelog DAG (i.e. isancestor(p, np) is False).
-            # For example:
-            #
-            #   B'   # rebase -s B -d D, when B was rebased to B'. dest for C
-            #   | C  # is B', but merge base for C is B, instead of
-            #   D |  # changelog.ancestor(C, B') == A. If changelog DAG and
-            #   | B  # "state" edges are merged (so there will be an edge from
-            #   |/   # B to B'), the merge base is still ancestor(C, B') in
-            #   A    # the merged graph.
-            #
-            # Also see https://bz.mercurial-scm.org/show_bug.cgi?id=1950#c8
-            # which uses "virtual null merge" to explain this situation.
-            if isancestor(p, np):
-                bases[i] = nullrev
-
             # If one parent becomes an ancestor of the other, drop the ancestor
             for j, x in enumerate(newps[:i]):
                 if x == nullrev:
@@ -1754,10 +1738,10 @@
     # But our merge base candidates (D and E in above case) could still be
     # better than the default (ancestor(F, Z) == null). Therefore still
     # pick one (so choose p1 above).
-    if sum(1 for b in set(bases) if b != nullrev) > 1:
+    if sum(1 for b in set(bases) if b != nullrev and b not in newps) > 1:
         unwanted = [None, None]  # unwanted[i]: unwanted revs if choose bases[i]
         for i, base in enumerate(bases):
-            if base == nullrev:
+            if base == nullrev or base in newps:
                 continue
             # Revisions in the side (not chosen as merge base) branch that
             # might contain "surprising" contents
@@ -1781,42 +1765,40 @@
                     )
                 )
 
-        # Choose a merge base that has a minimal number of unwanted revs.
-        l, i = min(
-            (len(revs), i)
-            for i, revs in enumerate(unwanted)
-            if revs is not None
-        )
-
-        # The merge will include unwanted revisions. Abort now. Revisit this if
-        # we have a more advanced merge algorithm that handles multiple bases.
-        if l > 0:
-            unwanteddesc = _(b' or ').join(
-                (
-                    b', '.join(b'%d:%s' % (r, repo[r]) for r in revs)
-                    for revs in unwanted
-                    if revs is not None
-                )
-            )
-            raise error.Abort(
-                _(b'rebasing %d:%s will include unwanted changes from %s')
-                % (rev, repo[rev], unwanteddesc)
+        if any(revs is not None for revs in unwanted):
+            # Choose a merge base that has a minimal number of unwanted revs.
+            l, i = min(
+                (len(revs), i)
+                for i, revs in enumerate(unwanted)
+                if revs is not None
             )
 
-        # newps[0] should match merge base if possible. Currently, if newps[i]
-        # is nullrev, the only case is newps[i] and newps[j] (j < i), one is
-        # the other's ancestor. In that case, it's fine to not swap newps here.
-        # (see CASE-1 and CASE-2 above)
-        if i != 0:
-            if newps[i] != nullrev:
-                newps[0], newps[i] = newps[i], newps[0]
-            bases[0], bases[i] = bases[i], bases[0]
+            # The merge will include unwanted revisions. Abort now. Revisit this if
+            # we have a more advanced merge algorithm that handles multiple bases.
+            if l > 0:
+                unwanteddesc = _(b' or ').join(
+                    (
+                        b', '.join(b'%d:%s' % (r, repo[r]) for r in revs)
+                        for revs in unwanted
+                        if revs is not None
+                    )
+                )
+                raise error.Abort(
+                    _(b'rebasing %d:%s will include unwanted changes from %s')
+                    % (rev, repo[rev], unwanteddesc)
+                )
+
+            # newps[0] should match merge base if possible. Currently, if newps[i]
+            # is nullrev, the only case is newps[i] and newps[j] (j < i), one is
+            # the other's ancestor. In that case, it's fine to not swap newps here.
+            # (see CASE-1 and CASE-2 above)
+            if i != 0:
+                if newps[i] != nullrev:
+                    newps[0], newps[i] = newps[i], newps[0]
+                bases[0], bases[i] = bases[i], bases[0]
 
     # "rebasenode" updates to new p1, use the corresponding merge base.
-    if bases[0] != nullrev:
-        base = bases[0]
-    else:
-        base = None
+    base = bases[0]
 
     repo.ui.debug(b" future parents are %d and %d\n" % tuple(newps))
 
--- a/tests/test-rebase-dest.t	Wed Jan 15 15:51:01 2020 +0100
+++ b/tests/test-rebase-dest.t	Thu Jan 16 00:03:19 2020 -0800
@@ -256,7 +256,7 @@
   > EOS
   rebasing 3:a4256619d830 "B" (B)
   rebasing 6:8e139e245220 "C" (C tip)
-  o    8: 51e2ce92e06a C
+  o    8: d7d1169e9b1c C
   |\
   | o    7: 2ed0c8546285 B
   | |\
--- a/tests/test-rebase-newancestor.t	Wed Jan 15 15:51:01 2020 +0100
+++ b/tests/test-rebase-newancestor.t	Thu Jan 16 00:03:19 2020 -0800
@@ -68,11 +68,6 @@
 that is mixed up with the actual merge stuff and there is in general no way to
 separate them.
 
-Note: The dev branch contains _no_ changes to f-default. It might be unclear
-how rebasing of ancestor merges should be handled, but the current behavior
-with spurious prompts for conflicts in files that didn't change seems very
-wrong.
-
   $ hg init ancestor-merge
   $ cd ancestor-merge
 
@@ -133,16 +128,11 @@
   note: not rebasing 1:1d1a643d390e "dev: create branch", its destination already has all its changes
   rebasing 2:ec2c14fb2984 "dev: f-dev stuff"
   rebasing 4:4b019212aaf6 "dev: merge default"
-  file 'f-default' was deleted in local [dest] but was modified in other [source].
-  You can use (c)hanged version, leave (d)eleted, or leave (u)nresolved.
-  What do you want to do? c
+  note: not rebasing 4:4b019212aaf6 "dev: merge default", its destination already has all its changes
   rebasing 6:010ced67e558 "dev: merge default"
+  note: not rebasing 6:010ced67e558 "dev: merge default", its destination already has all its changes
   saved backup bundle to $TESTTMP/ancestor-merge/.hg/strip-backup/1d1a643d390e-4a6f6d17-rebase.hg
   $ hg tglog
-  o  6: de147e4f69cf 'dev: merge default'
-  |
-  o  5: eda7b7f46f5d 'dev: merge default'
-  |
   o  4: 3e075b1c0a40 'dev: f-dev stuff'
   |
   @  3: e08089805d82 'default: f-other stuff'
@@ -163,28 +153,8 @@
   > EOF
   rebasing 2:ec2c14fb2984 "dev: f-dev stuff"
   rebasing 4:4b019212aaf6 "dev: merge default"
-  file 'f-default' was deleted in local [dest] but was modified in other [source].
-  You can use (c)hanged version, leave (d)eleted, or leave (u)nresolved.
-  What do you want to do? c
-  rebasing 6:010ced67e558 "dev: merge default"
-  saved backup bundle to $TESTTMP/ancestor-merge-2/.hg/strip-backup/ec2c14fb2984-827d7a44-rebase.hg
-  $ hg tglog
-  o  7: de147e4f69cf 'dev: merge default'
-  |
-  o  6: eda7b7f46f5d 'dev: merge default'
-  |
-  o  5: 3e075b1c0a40 'dev: f-dev stuff'
-  |
-  o  4: e08089805d82 'default: f-other stuff'
-  |
-  o  3: 462860db70a1 'default: remove f-default'
-  |
-  o  2: f157ecfd2b6b 'default: f-default stuff'
-  |
-  | o  1: 1d1a643d390e 'dev: create branch' dev
-  |/
-  o  0: e90e8eb90b6f 'default: create f-default'
-  
+  abort: rebasing 4:4b019212aaf6 will include unwanted changes from 1:1d1a643d390e
+  [255]
   $ cd ..
 
 
@@ -284,18 +254,7 @@
   rebasing 6:4c5f12f25ebe "merge rebase ancestors" (tip)
   resolving manifests
   removing other
-  note: merging f9daf77ffe76+ and 4c5f12f25ebe using bids from ancestors a60552eb93fb and f59da8fc0fcf
-  
-  calculating bids for ancestor a60552eb93fb
   resolving manifests
-  
-  calculating bids for ancestor f59da8fc0fcf
-  resolving manifests
-  
-  auction for merging merge bids
-   other: consensus for g
-  end of auction
-  
   getting other
   committing files:
   other