changeset 46874:84a93fa7ecfd

revlog-compression: use zstd by default (if available) As see in changeset bb271ec2fbfb, zstd is 20% to 50% faster for reading and writing. Use take advantage of the new config behavior to try zstd by default, falling back to zlib is zstd is not available on that plateform. Differential Revision: https://phab.mercurial-scm.org/D10326
author Pierre-Yves David <pierre-yves.david@octobus.net>
date Tue, 06 Apr 2021 18:55:19 +0200
parents 0abf5eba0042
children 651e6df2b0a4
files mercurial/configitems.py mercurial/helptext/config.txt mercurial/upgrade_utils/actions.py tests/test-bundle.t tests/test-clone-uncompressed.t tests/test-copies-in-changeset.t tests/test-debugcommands.t tests/test-generaldelta.t tests/test-http-bundle1.t tests/test-http.t tests/test-init.t tests/test-lfconvert.t tests/test-lfs-largefiles.t tests/test-narrow-clone-no-ellipsis.t tests/test-narrow-clone-stream.t tests/test-narrow-clone.t tests/test-narrow-sparse.t tests/test-obsolete.t tests/test-persistent-nodemap.t tests/test-phases.t tests/test-remotefilelog-bgprefetch.t tests/test-remotefilelog-clone-tree.t tests/test-remotefilelog-clone.t tests/test-remotefilelog-log.t tests/test-remotefilelog-partial-shallow.t tests/test-remotefilelog-prefetch.t tests/test-remotefilelog-sparse.t tests/test-remotefilelog-tags.t tests/test-requires.t tests/test-revlog-v2.t tests/test-rhg.t tests/test-sidedata.t tests/test-sparse-requirement.t tests/test-sqlitestore.t tests/test-ssh-bundle1.t tests/test-ssh.t tests/test-stream-bundle-v2.t tests/test-treemanifest.t tests/test-upgrade-repo.t tests/test-wireproto-command-rawstorefiledata.t tests/test-wireproto-exchangev2.t
diffstat 41 files changed, 338 insertions(+), 150 deletions(-) [+]
line wrap: on
line diff
--- a/mercurial/configitems.py	Wed Apr 07 13:31:15 2021 +0200
+++ b/mercurial/configitems.py	Tue Apr 06 18:55:19 2021 +0200
@@ -1307,7 +1307,7 @@
 coreconfigitem(
     b'format',
     b'revlog-compression',
-    default=lambda: [b'zlib'],
+    default=lambda: [b'zstd', b'zlib'],
     alias=[(b'experimental', b'format.compression')],
 )
 coreconfigitem(
--- a/mercurial/helptext/config.txt	Wed Apr 07 13:31:15 2021 +0200
+++ b/mercurial/helptext/config.txt	Tue Apr 06 18:55:19 2021 +0200
@@ -966,7 +966,7 @@
 
     On some systems, the Mercurial installation may lack `zstd` support.
 
-    Default is `zlib`.
+    Default is `zstd` if available, `zlib` otherwise.
 
 ``bookmarks-in-store``
     Store bookmarks in .hg/store/. This means that bookmarks are shared when
--- a/mercurial/upgrade_utils/actions.py	Wed Apr 07 13:31:15 2021 +0200
+++ b/mercurial/upgrade_utils/actions.py	Tue Apr 06 18:55:19 2021 +0200
@@ -395,10 +395,21 @@
         return True
 
 
+_has_zstd = (
+    b'zstd' in util.compengines
+    and util.compengines[b'zstd'].available()
+    and util.compengines[b'zstd'].revlogheader()
+)
+
+
 @registerformatvariant
 class compressionengine(formatvariant):
     name = b'compression'
-    default = b'zlib'
+
+    if _has_zstd:
+        default = b'zstd'
+    else:
+        default = b'zlib'
 
     description = _(
         b'Compresion algorithm used to compress data. '
--- a/tests/test-bundle.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-bundle.t	Tue Apr 06 18:55:19 2021 +0200
@@ -295,13 +295,16 @@
 #if reporevlogstore
 
   $ hg -R test debugcreatestreamclonebundle packed.hg
-  writing 2664 bytes for 6 files
+  writing 2664 bytes for 6 files (no-zstd !)
+  writing 2665 bytes for 6 files (zstd !)
   bundle requirements: generaldelta, revlogv1, sparserevlog
 
   $ f -B 64 --size --sha1 --hexdump packed.hg
-  packed.hg: size=2840, sha1=12bf3eee3eb8a04c503ce2d29b48f0135c7edff5
+  packed.hg: size=2840, sha1=12bf3eee3eb8a04c503ce2d29b48f0135c7edff5 (no-zstd !)
+  packed.hg: size=2841, sha1=8b645a65f49b0ae43042a9f3da56d4bfdf1c7f99 (zstd !)
   0000: 48 47 53 31 55 4e 00 00 00 00 00 00 00 06 00 00 |HGS1UN..........|
-  0010: 00 00 00 00 0a 68 00 23 67 65 6e 65 72 61 6c 64 |.....h.#generald|
+  0010: 00 00 00 00 0a 68 00 23 67 65 6e 65 72 61 6c 64 |.....h.#generald| (no-zstd !)
+  0010: 00 00 00 00 0a 69 00 23 67 65 6e 65 72 61 6c 64 |.....i.#generald| (zstd !)
   0020: 65 6c 74 61 2c 72 65 76 6c 6f 67 76 31 2c 73 70 |elta,revlogv1,sp|
   0030: 61 72 73 65 72 65 76 6c 6f 67 00 64 61 74 61 2f |arserevlog.data/|
 
--- a/tests/test-clone-uncompressed.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-clone-uncompressed.t	Tue Apr 06 18:55:19 2021 +0200
@@ -178,16 +178,20 @@
 #if stream-legacy
   $ hg clone --stream -U http://localhost:$HGPORT clone1
   streaming all changes
-  1027 files to transfer, 96.3 KB of data
-  transferred 96.3 KB in * seconds (*/sec) (glob)
+  1027 files to transfer, 96.3 KB of data (no-zstd !)
+  transferred 96.3 KB in * seconds (*/sec) (glob) (no-zstd !)
+  1027 files to transfer, 93.5 KB of data (zstd !)
+  transferred 93.5 KB in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
 #endif
 #if stream-bundle2
   $ hg clone --stream -U http://localhost:$HGPORT clone1
   streaming all changes
-  1030 files to transfer, 96.5 KB of data
-  transferred 96.5 KB in * seconds (* */sec) (glob)
+  1030 files to transfer, 96.5 KB of data (no-zstd !)
+  transferred 96.5 KB in * seconds (*/sec) (glob) (no-zstd !)
+  1030 files to transfer, 93.6 KB of data (zstd !)
+  transferred 93.6 KB in * seconds (* */sec) (glob) (zstd !)
 
   $ ls -1 clone1/.hg/cache
   branch2-base
@@ -211,39 +215,56 @@
   
 
   $ f --size --hex --bytes 256 body
-  body: size=112262
+  body: size=112262 (no-zstd !)
+  body: size=109410 (zstd !)
   0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......|
-  0010: 7f 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 |..STREAM2.......|
-  0020: 05 09 04 0c 44 62 79 74 65 63 6f 75 6e 74 39 38 |....Dbytecount98|
-  0030: 37 37 35 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 |775filecount1030|
+  0010: 7f 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 |..STREAM2.......| (no-zstd !)
+  0020: 05 09 04 0c 44 62 79 74 65 63 6f 75 6e 74 39 38 |....Dbytecount98| (no-zstd !)
+  0030: 37 37 35 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 |775filecount1030| (no-zstd !)
+  0010: 99 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 |..STREAM2.......| (zstd !)
+  0020: 05 09 04 0c 5e 62 79 74 65 63 6f 75 6e 74 39 35 |....^bytecount95| (zstd !)
+  0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 |897filecount1030| (zstd !)
   0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 |requirementsdote|
   0050: 6e 63 6f 64 65 25 32 43 66 6e 63 61 63 68 65 25 |ncode%2Cfncache%|
   0060: 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 25 32 |2Cgeneraldelta%2|
-  0070: 43 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 72 |Crevlogv1%2Cspar|
-  0080: 73 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 65 |serevlog%2Cstore|
-  0090: 00 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 00 |....s.Bdata/0.i.|
-  00a0: 03 00 01 00 00 00 00 00 00 00 02 00 00 00 01 00 |................|
-  00b0: 00 00 00 00 00 00 01 ff ff ff ff ff ff ff ff 80 |................|
-  00c0: 29 63 a0 49 d3 23 87 bf ce fe 56 67 92 67 2c 69 |)c.I.#....Vg.g,i|
-  00d0: d1 ec 39 00 00 00 00 00 00 00 00 00 00 00 00 75 |..9............u|
-  00e0: 30 73 08 42 64 61 74 61 2f 31 2e 69 00 03 00 01 |0s.Bdata/1.i....|
-  00f0: 00 00 00 00 00 00 00 02 00 00 00 01 00 00 00 00 |................|
+  0070: 43 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 72 |Crevlogv1%2Cspar| (no-zstd !)
+  0080: 73 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 65 |serevlog%2Cstore| (no-zstd !)
+  0090: 00 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 00 |....s.Bdata/0.i.| (no-zstd !)
+  00a0: 03 00 01 00 00 00 00 00 00 00 02 00 00 00 01 00 |................| (no-zstd !)
+  00b0: 00 00 00 00 00 00 01 ff ff ff ff ff ff ff ff 80 |................| (no-zstd !)
+  00c0: 29 63 a0 49 d3 23 87 bf ce fe 56 67 92 67 2c 69 |)c.I.#....Vg.g,i| (no-zstd !)
+  00d0: d1 ec 39 00 00 00 00 00 00 00 00 00 00 00 00 75 |..9............u| (no-zstd !)
+  00e0: 30 73 08 42 64 61 74 61 2f 31 2e 69 00 03 00 01 |0s.Bdata/1.i....| (no-zstd !)
+  00f0: 00 00 00 00 00 00 00 02 00 00 00 01 00 00 00 00 |................| (no-zstd !)
+  0070: 43 72 65 76 6c 6f 67 2d 63 6f 6d 70 72 65 73 73 |Crevlog-compress| (zstd !)
+  0080: 69 6f 6e 2d 7a 73 74 64 25 32 43 72 65 76 6c 6f |ion-zstd%2Crevlo| (zstd !)
+  0090: 67 76 31 25 32 43 73 70 61 72 73 65 72 65 76 6c |gv1%2Csparserevl| (zstd !)
+  00a0: 6f 67 25 32 43 73 74 6f 72 65 00 00 80 00 73 08 |og%2Cstore....s.| (zstd !)
+  00b0: 42 64 61 74 61 2f 30 2e 69 00 03 00 01 00 00 00 |Bdata/0.i.......| (zstd !)
+  00c0: 00 00 00 00 02 00 00 00 01 00 00 00 00 00 00 00 |................| (zstd !)
+  00d0: 01 ff ff ff ff ff ff ff ff 80 29 63 a0 49 d3 23 |..........)c.I.#| (zstd !)
+  00e0: 87 bf ce fe 56 67 92 67 2c 69 d1 ec 39 00 00 00 |....Vg.g,i..9...| (zstd !)
+  00f0: 00 00 00 00 00 00 00 00 00 75 30 73 08 42 64 61 |.........u0s.Bda| (zstd !)
 
 --uncompressed is an alias to --stream
 
 #if stream-legacy
   $ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed
   streaming all changes
-  1027 files to transfer, 96.3 KB of data
-  transferred 96.3 KB in * seconds (*/sec) (glob)
+  1027 files to transfer, 96.3 KB of data (no-zstd !)
+  transferred 96.3 KB in * seconds (*/sec) (glob) (no-zstd !)
+  1027 files to transfer, 93.5 KB of data (zstd !)
+  transferred 93.5 KB in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
 #endif
 #if stream-bundle2
   $ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed
   streaming all changes
-  1030 files to transfer, 96.5 KB of data
-  transferred 96.5 KB in * seconds (* */sec) (glob)
+  1030 files to transfer, 96.5 KB of data (no-zstd !)
+  transferred 96.5 KB in * seconds (* */sec) (glob) (no-zstd !)
+  1030 files to transfer, 93.6 KB of data (zstd !)
+  transferred 93.6 KB in * seconds (* */sec) (glob) (zstd !)
 #endif
 
 Clone with background file closing enabled
@@ -255,10 +276,12 @@
   sending branchmap command
   streaming all changes
   sending stream_out command
-  1027 files to transfer, 96.3 KB of data
+  1027 files to transfer, 96.3 KB of data (no-zstd !)
+  1027 files to transfer, 93.5 KB of data (zstd !)
   starting 4 threads for background file closing
   updating the branch cache
-  transferred 96.3 KB in * seconds (*/sec) (glob)
+  transferred 96.3 KB in * seconds (*/sec) (glob) (no-zstd !)
+  transferred 93.5 KB in * seconds (* */sec) (glob) (zstd !)
   query 1; heads
   sending batch command
   searching for changes
@@ -285,12 +308,15 @@
   bundle2-input-bundle: with-transaction
   bundle2-input-part: "stream2" (params: 3 mandatory) supported
   applying stream bundle
-  1030 files to transfer, 96.5 KB of data
+  1030 files to transfer, 96.5 KB of data (no-zstd !)
+  1030 files to transfer, 93.6 KB of data (zstd !)
   starting 4 threads for background file closing
   starting 4 threads for background file closing
   updating the branch cache
-  transferred 96.5 KB in * seconds (* */sec) (glob)
-  bundle2-input-part: total payload size 112094
+  transferred 96.5 KB in * seconds (* */sec) (glob) (no-zstd !)
+  bundle2-input-part: total payload size 112094 (no-zstd !)
+  transferred 93.6 KB in * seconds (* */sec) (glob) (zstd !)
+  bundle2-input-part: total payload size 109216 (zstd !)
   bundle2-input-part: "listkeys" (params: 1 mandatory) supported
   bundle2-input-bundle: 2 parts total
   checking for updated bookmarks
@@ -322,16 +348,20 @@
 #if stream-legacy
   $ hg clone --stream -U http://localhost:$HGPORT secret-allowed
   streaming all changes
-  1027 files to transfer, 96.3 KB of data
-  transferred 96.3 KB in * seconds (*/sec) (glob)
+  1027 files to transfer, 96.3 KB of data (no-zstd !)
+  transferred 96.3 KB in * seconds (*/sec) (glob) (no-zstd !)
+  1027 files to transfer, 93.5 KB of data (zstd !)
+  transferred 93.5 KB in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
 #endif
 #if stream-bundle2
   $ hg clone --stream -U http://localhost:$HGPORT secret-allowed
   streaming all changes
-  1030 files to transfer, 96.5 KB of data
-  transferred 96.5 KB in * seconds (* */sec) (glob)
+  1030 files to transfer, 96.5 KB of data (no-zstd !)
+  transferred 96.5 KB in * seconds (* */sec) (glob) (no-zstd !)
+  1030 files to transfer, 93.6 KB of data (zstd !)
+  transferred 93.6 KB in * seconds (* */sec) (glob) (zstd !)
 #endif
 
   $ killdaemons.py
@@ -437,8 +467,10 @@
 #if stream-legacy
   $ hg clone --stream http://localhost:$HGPORT with-bookmarks
   streaming all changes
-  1027 files to transfer, 96.3 KB of data
-  transferred 96.3 KB in * seconds (*) (glob)
+  1027 files to transfer, 96.3 KB of data (no-zstd !)
+  transferred 96.3 KB in * seconds (*) (glob) (no-zstd !)
+  1027 files to transfer, 93.5 KB of data (zstd !)
+  transferred 93.5 KB in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   updating to branch default
@@ -447,8 +479,10 @@
 #if stream-bundle2
   $ hg clone --stream http://localhost:$HGPORT with-bookmarks
   streaming all changes
-  1033 files to transfer, 96.6 KB of data
-  transferred 96.6 KB in * seconds (* */sec) (glob)
+  1033 files to transfer, 96.6 KB of data (no-zstd !)
+  transferred 96.6 KB in * seconds (* */sec) (glob) (no-zstd !)
+  1033 files to transfer, 93.8 KB of data (zstd !)
+  transferred 93.8 KB in * seconds (* */sec) (glob) (zstd !)
   updating to branch default
   1025 files updated, 0 files merged, 0 files removed, 0 files unresolved
 #endif
@@ -467,8 +501,10 @@
 #if stream-legacy
   $ hg clone --stream http://localhost:$HGPORT phase-publish
   streaming all changes
-  1027 files to transfer, 96.3 KB of data
-  transferred 96.3 KB in * seconds (*) (glob)
+  1027 files to transfer, 96.3 KB of data (no-zstd !)
+  transferred 96.3 KB in * seconds (*) (glob) (no-zstd !)
+  1027 files to transfer, 93.5 KB of data (zstd !)
+  transferred 93.5 KB in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   updating to branch default
@@ -477,8 +513,10 @@
 #if stream-bundle2
   $ hg clone --stream http://localhost:$HGPORT phase-publish
   streaming all changes
-  1033 files to transfer, 96.6 KB of data
-  transferred 96.6 KB in * seconds (* */sec) (glob)
+  1033 files to transfer, 96.6 KB of data (no-zstd !)
+  transferred 96.6 KB in * seconds (* */sec) (glob) (no-zstd !)
+  1033 files to transfer, 93.8 KB of data (zstd !)
+  transferred 93.8 KB in * seconds (* */sec) (glob) (zstd !)
   updating to branch default
   1025 files updated, 0 files merged, 0 files removed, 0 files unresolved
 #endif
@@ -503,8 +541,10 @@
 
   $ hg clone --stream http://localhost:$HGPORT phase-no-publish
   streaming all changes
-  1027 files to transfer, 96.3 KB of data
-  transferred 96.3 KB in * seconds (*) (glob)
+  1027 files to transfer, 96.3 KB of data (no-zstd !)
+  transferred 96.3 KB in * seconds (* */sec) (glob) (no-zstd !)
+  1027 files to transfer, 93.5 KB of data (zstd !)
+  transferred 93.5 KB in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   updating to branch default
@@ -516,8 +556,10 @@
 #if stream-bundle2
   $ hg clone --stream http://localhost:$HGPORT phase-no-publish
   streaming all changes
-  1034 files to transfer, 96.7 KB of data
-  transferred 96.7 KB in * seconds (* */sec) (glob)
+  1034 files to transfer, 96.7 KB of data (no-zstd !)
+  transferred 96.7 KB in * seconds (* */sec) (glob) (no-zstd !)
+  1034 files to transfer, 93.9 KB of data (zstd !)
+  transferred 93.9 KB in * seconds (* */sec) (glob) (zstd !)
   updating to branch default
   1025 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R phase-no-publish phase -r 'all()'
@@ -561,8 +603,10 @@
 
   $ hg clone -U --stream http://localhost:$HGPORT with-obsolescence
   streaming all changes
-  1035 files to transfer, 97.1 KB of data
-  transferred 97.1 KB in * seconds (* */sec) (glob)
+  1035 files to transfer, 97.1 KB of data (no-zstd !)
+  transferred 97.1 KB in * seconds (* */sec) (glob) (no-zstd !)
+  1035 files to transfer, 94.3 KB of data (zstd !)
+  transferred 94.3 KB in * seconds (* */sec) (glob) (zstd !)
   $ hg -R with-obsolescence log -T '{rev}: {phase}\n'
   1: draft
   0: draft
--- a/tests/test-copies-in-changeset.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-copies-in-changeset.t	Tue Apr 06 18:55:19 2021 +0200
@@ -43,7 +43,8 @@
   copies-sdc:         yes    yes      no
   revlog-v2:          yes    yes      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
 #else
   $ hg debugformat -v
@@ -57,7 +58,8 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
 #endif
   $ echo a > a
@@ -428,7 +430,8 @@
   copies-sdc:         yes    yes      no
   revlog-v2:          yes    yes      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ hg debugsidedata -c -- 0
   1 sidedata entries
@@ -454,7 +457,8 @@
   copies-sdc:          no     no      no
   revlog-v2:          yes    yes      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ hg debugsidedata -c -- 0
   1 sidedata entries
@@ -482,7 +486,8 @@
   copies-sdc:         yes    yes      no
   revlog-v2:          yes    yes      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ hg debugsidedata -c -- 0
   1 sidedata entries
--- a/tests/test-debugcommands.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-debugcommands.t	Tue Apr 06 18:55:19 2021 +0200
@@ -368,7 +368,8 @@
   7 1
   8 1
   9 1
-  10 2
+  10 2 (no-zstd !)
+  10 1 (zstd !)
   11 1
   $ hg --config extensions.strip= strip --no-backup -r 1
   1 files updated, 0 files merged, 0 files removed, 0 files unresolved
--- a/tests/test-generaldelta.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-generaldelta.t	Tue Apr 06 18:55:19 2021 +0200
@@ -106,22 +106,33 @@
   3 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ hg -R repo debugdeltachain -m
       rev  chain# chainlen     prev   delta       size    rawsize  chainsize     ratio   lindist extradist extraratio
-        0       1        1       -1    base        104        135        104   0.77037       104         0    0.00000
-        1       1        2        0    prev         57        135        161   1.19259       161         0    0.00000
-        2       1        3        1    prev         57        135        218   1.61481       218         0    0.00000
+        0       1        1       -1    base        104        135        104   0.77037       104         0    0.00000 (no-zstd !)
+        1       1        2        0    prev         57        135        161   1.19259       161         0    0.00000 (no-zstd !)
+        2       1        3        1    prev         57        135        218   1.61481       218         0    0.00000 (no-zstd !)
+        0       1        1       -1    base        107        135        107   0.79259       107         0    0.00000 (zstd !)
+        1       1        2        0    prev         57        135        164   1.21481       164         0    0.00000 (zstd !)
+        2       1        3        1    prev         57        135        221   1.63704       221         0    0.00000 (zstd !)
         3       2        1       -1    base        104        135        104   0.77037       104         0    0.00000
   $ hg -R usegd debugdeltachain -m
       rev  chain# chainlen     prev   delta       size    rawsize  chainsize     ratio   lindist extradist extraratio
-        0       1        1       -1    base        104        135        104   0.77037       104         0    0.00000
-        1       1        2        0      p1         57        135        161   1.19259       161         0    0.00000
-        2       1        3        1    prev         57        135        218   1.61481       218         0    0.00000
-        3       1        2        0      p1         57        135        161   1.19259       275       114    0.70807
+        0       1        1       -1    base        104        135        104   0.77037       104         0    0.00000 (no-zstd !)
+        1       1        2        0      p1         57        135        161   1.19259       161         0    0.00000 (no-zstd !)
+        2       1        3        1    prev         57        135        218   1.61481       218         0    0.00000 (no-zstd !)
+        3       1        2        0      p1         57        135        161   1.19259       275       114    0.70807 (no-zstd !)
+        0       1        1       -1    base        107        135        107   0.79259       107         0    0.00000 (zstd !)
+        1       1        2        0      p1         57        135        164   1.21481       164         0    0.00000 (zstd !)
+        2       1        3        1    prev         57        135        221   1.63704       221         0    0.00000 (zstd !)
+        3       1        2        0      p1         57        135        164   1.21481       278       114    0.69512 (zstd !)
   $ hg -R full debugdeltachain -m
       rev  chain# chainlen     prev   delta       size    rawsize  chainsize     ratio   lindist extradist extraratio
-        0       1        1       -1    base        104        135        104   0.77037       104         0    0.00000
-        1       1        2        0      p1         57        135        161   1.19259       161         0    0.00000
-        2       1        2        0      p1         57        135        161   1.19259       218        57    0.35404
-        3       1        2        0      p1         57        135        161   1.19259       275       114    0.70807
+        0       1        1       -1    base        104        135        104   0.77037       104         0    0.00000 (no-zstd !)
+        1       1        2        0      p1         57        135        161   1.19259       161         0    0.00000 (no-zstd !)
+        2       1        2        0      p1         57        135        161   1.19259       218        57    0.35404 (no-zstd !)
+        3       1        2        0      p1         57        135        161   1.19259       275       114    0.70807 (no-zstd !)
+        0       1        1       -1    base        107        135        107   0.79259       107         0    0.00000 (zstd !)
+        1       1        2        0      p1         57        135        164   1.21481       164         0    0.00000 (zstd !)
+        2       1        2        0      p1         57        135        164   1.21481       221        57    0.34756 (zstd !)
+        3       1        2        0      p1         57        135        164   1.21481       278       114    0.69512 (zstd !)
 
 Test revlog.optimize-delta-parent-choice
 
@@ -142,9 +153,12 @@
   $ hg commit -q -m merge
   $ hg debugdeltachain -m
       rev  chain# chainlen     prev   delta       size    rawsize  chainsize     ratio   lindist extradist extraratio
-        0       1        1       -1    base         59        215         59   0.27442        59         0    0.00000
-        1       1        2        0    prev         61         86        120   1.39535       120         0    0.00000
-        2       1        2        0      p2         62        301        121   0.40199       182        61    0.50413
+        0       1        1       -1    base         59        215         59   0.27442        59         0    0.00000 (no-zstd !)
+        1       1        2        0    prev         61         86        120   1.39535       120         0    0.00000 (no-zstd !)
+        2       1        2        0      p2         62        301        121   0.40199       182        61    0.50413 (no-zstd !)
+        0       1        1       -1    base         68        215         68   0.31628        68         0    0.00000 (zstd !)
+        1       1        2        0    prev         70         86        138   1.60465       138         0    0.00000 (zstd !)
+        2       1        2        0      p2         68        301        136   0.45183       206        70    0.51471 (zstd !)
 
   $ hg strip -q -r . --config extensions.strip=
 
@@ -154,9 +168,12 @@
   $ hg commit -q -m merge --config storage.revlog.optimize-delta-parent-choice=yes
   $ hg debugdeltachain -m
       rev  chain# chainlen     prev   delta       size    rawsize  chainsize     ratio   lindist extradist extraratio
-        0       1        1       -1    base         59        215         59   0.27442        59         0    0.00000
-        1       1        2        0    prev         61         86        120   1.39535       120         0    0.00000
-        2       1        2        0      p2         62        301        121   0.40199       182        61    0.50413
+        0       1        1       -1    base         59        215         59   0.27442        59         0    0.00000 (no-zstd !)
+        1       1        2        0    prev         61         86        120   1.39535       120         0    0.00000 (no-zstd !)
+        2       1        2        0      p2         62        301        121   0.40199       182        61    0.50413 (no-zstd !)
+        0       1        1       -1    base         68        215         68   0.31628        68         0    0.00000 (zstd !)
+        1       1        2        0    prev         70         86        138   1.60465       138         0    0.00000 (zstd !)
+        2       1        2        0      p2         68        301        136   0.45183       206        70    0.51471 (zstd !)
 
 Test that strip bundle use bundle2
   $ hg --config extensions.strip= strip .
@@ -267,12 +284,17 @@
        46       3       29       45      p1         58       1334       1671   1.25262      1671         0    0.00000
        47       3       30       46      p1         58       1380       1729   1.25290      1729         0    0.00000
        48       3       31       47      p1         58       1426       1787   1.25316      1787         0    0.00000
-       49       4        1       -1    base        197        316        197   0.62342       197         0    0.00000
-       50       4        2       49      p1         58        362        255   0.70442       255         0    0.00000
-       51       4        3       50    prev        356        594        611   1.02862       611         0    0.00000
-       52       4        4       51      p1         58        640        669   1.04531       669         0    0.00000
+       49       4        1       -1    base        197        316        197   0.62342       197         0    0.00000 (no-zstd !)
+       50       4        2       49      p1         58        362        255   0.70442       255         0    0.00000 (no-zstd !)
+       51       4        3       50    prev        356        594        611   1.02862       611         0    0.00000 (no-zstd !)
+       52       4        4       51      p1         58        640        669   1.04531       669         0    0.00000 (no-zstd !)
+       49       4        1       -1    base        205        316        205   0.64873       205         0    0.00000 (zstd !)
+       50       4        2       49      p1         58        362        263   0.72652       263         0    0.00000 (zstd !)
+       51       4        3       50    prev        366        594        629   1.05892       629         0    0.00000 (zstd !)
+       52       4        4       51      p1         58        640        687   1.07344       687         0    0.00000 (zstd !)
        53       5        1       -1    base          0          0          0   0.00000         0         0    0.00000
-       54       6        1       -1    base        369        640        369   0.57656       369         0    0.00000
+       54       6        1       -1    base        369        640        369   0.57656       369         0    0.00000 (no-zstd !)
+       54       6        1       -1    base        375        640        375   0.58594       375         0    0.00000 (zstd !)
   $ hg clone --pull source-repo --config experimental.maxdeltachainspan=2800 relax-chain --config format.generaldelta=yes
   requesting all changes
   adding changesets
@@ -333,12 +355,17 @@
        46       3       29       45      p1         58       1334       1671   1.25262      1671         0    0.00000
        47       3       30       46      p1         58       1380       1729   1.25290      1729         0    0.00000
        48       3       31       47      p1         58       1426       1787   1.25316      1787         0    0.00000
-       49       4        1       -1    base        197        316        197   0.62342       197         0    0.00000
-       50       4        2       49      p1         58        362        255   0.70442       255         0    0.00000
-       51       2       13       17      p1         58        594        739   1.24411      2781      2042    2.76319
-       52       5        1       -1    base        369        640        369   0.57656       369         0    0.00000
+       49       4        1       -1    base        197        316        197   0.62342       197         0    0.00000 (no-zstd !)
+       50       4        2       49      p1         58        362        255   0.70442       255         0    0.00000 (no-zstd !)
+       51       2       13       17      p1         58        594        739   1.24411      2781      2042    2.76319 (no-zstd !)
+       52       5        1       -1    base        369        640        369   0.57656       369         0    0.00000 (no-zstd !)
+       49       4        1       -1    base        205        316        205   0.64873       205         0    0.00000 (zstd !)
+       50       4        2       49      p1         58        362        263   0.72652       263         0    0.00000 (zstd !)
+       51       2       13       17      p1         58        594        739   1.24411      2789      2050    2.77402 (zstd !)
+       52       5        1       -1    base        375        640        375   0.58594       375         0    0.00000 (zstd !)
        53       6        1       -1    base          0          0          0   0.00000         0         0    0.00000
-       54       7        1       -1    base        369        640        369   0.57656       369         0    0.00000
+       54       7        1       -1    base        369        640        369   0.57656       369         0    0.00000 (no-zstd !)
+       54       7        1       -1    base        375        640        375   0.58594       375         0    0.00000 (zstd !)
   $ hg clone --pull source-repo --config experimental.maxdeltachainspan=0 noconst-chain --config format.usegeneraldelta=yes --config storage.revlog.reuse-external-delta-parent=no
   requesting all changes
   adding changesets
@@ -404,4 +431,5 @@
        51       2       13       17      p1         58        594        739   1.24411      2642      1903    2.57510
        52       2       14       51      p1         58        640        797   1.24531      2700      1903    2.38770
        53       4        1       -1    base          0          0          0   0.00000         0         0    0.00000
-       54       5        1       -1    base        369        640        369   0.57656       369         0    0.00000
+       54       5        1       -1    base        369        640        369   0.57656       369         0    0.00000 (no-zstd !)
+       54       5        1       -1    base        375        640        375   0.58594       375         0    0.00000 (zstd !)
--- a/tests/test-http-bundle1.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-http-bundle1.t	Tue Apr 06 18:55:19 2021 +0200
@@ -38,7 +38,8 @@
 #if no-reposimplestore
   $ hg clone --stream http://localhost:$HGPORT/ copy 2>&1
   streaming all changes
-  6 files to transfer, 606 bytes of data
+  6 files to transfer, 606 bytes of data (no-zstd !)
+  6 files to transfer, 608 bytes of data (zstd !)
   transferred * bytes in * seconds (*/sec) (glob)
   searching for changes
   no changes found
@@ -225,7 +226,8 @@
 #if no-reposimplestore
   $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
   streaming all changes
-  7 files to transfer, 916 bytes of data
+  7 files to transfer, 916 bytes of data (no-zstd !)
+  7 files to transfer, 919 bytes of data (zstd !)
   transferred * bytes in * seconds (*/sec) (glob)
   searching for changes
   no changes found
--- a/tests/test-http.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-http.t	Tue Apr 06 18:55:19 2021 +0200
@@ -29,7 +29,8 @@
 #if no-reposimplestore
   $ hg clone --stream http://localhost:$HGPORT/ copy 2>&1
   streaming all changes
-  9 files to transfer, 715 bytes of data
+  9 files to transfer, 715 bytes of data (no-zstd !)
+  9 files to transfer, 717 bytes of data (zstd !)
   transferred * bytes in * seconds (*/sec) (glob)
   updating to branch default
   4 files updated, 0 files merged, 0 files removed, 0 files unresolved
--- a/tests/test-init.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-init.t	Tue Apr 06 18:55:19 2021 +0200
@@ -21,6 +21,7 @@
   dotencode
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -59,6 +60,7 @@
   $ hg --config format.usestore=false init old
   $ checknewrepo old
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   testonly-simplestore (reposimplestore !)
   sparserevlog
@@ -70,6 +72,7 @@
   store created
   00changelog.i created
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -83,6 +86,7 @@
   00changelog.i created
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -96,6 +100,7 @@
   00changelog.i created
   dotencode
   fncache
+  revlog-compression-zstd (zstd !)
   revlogv1
   store
   testonly-simplestore (reposimplestore !)
@@ -213,6 +218,7 @@
   dotencode
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -233,6 +239,7 @@
   dotencode
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -249,6 +256,7 @@
   dotencode
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-lfconvert.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-lfconvert.t	Tue Apr 06 18:55:19 2021 +0200
@@ -99,6 +99,7 @@
   fncache
   generaldelta
   largefiles
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-lfs-largefiles.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-lfs-largefiles.t	Tue Apr 06 18:55:19 2021 +0200
@@ -293,6 +293,7 @@
   fncache
   generaldelta
   lfs
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-narrow-clone-no-ellipsis.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-narrow-clone-no-ellipsis.t	Tue Apr 06 18:55:19 2021 +0200
@@ -26,6 +26,7 @@
   dotencode
   fncache
   narrowhg-experimental
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-narrow-clone-stream.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-narrow-clone-stream.t	Tue Apr 06 18:55:19 2021 +0200
@@ -68,6 +68,7 @@
   fncache (flat-fncache !)
   generaldelta
   narrowhg-experimental
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-narrow-clone.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-narrow-clone.t	Tue Apr 06 18:55:19 2021 +0200
@@ -42,6 +42,7 @@
   dotencode
   fncache
   narrowhg-experimental
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-narrow-sparse.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-narrow-sparse.t	Tue Apr 06 18:55:19 2021 +0200
@@ -61,6 +61,7 @@
   fncache
   generaldelta
   narrowhg-experimental
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-obsolete.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-obsolete.t	Tue Apr 06 18:55:19 2021 +0200
@@ -97,8 +97,10 @@
   # rev p1rev p2rev start   end deltastart base   p1   p2 rawsize totalsize compression heads chainlen
       0    -1    -1     0    59          0    0    0    0      58        58           0     1        0
       1     0    -1    59   118         59   59    0    0      58       116           0     1        0
-      2     1    -1   118   193        118  118   59    0      76       192           0     1        0
-      3     1    -1   193   260        193  193   59    0      66       258           0     2        0
+      2     1    -1   118   193        118  118   59    0      76       192           0     1        0 (no-zstd !)
+      3     1    -1   193   260        193  193   59    0      66       258           0     2        0 (no-zstd !)
+      2     1    -1   118   195        118  118   59    0      76       192           0     1        0 (zstd !)
+      3     1    -1   195   262        195  195   59    0      66       258           0     2        0 (zstd !)
   $ hg debugobsolete
   245bde4270cd1072a27757984f9cda8ba26f08ca cdbce2fbb16313928851e97e0d85413f3f7eb77f C (Thu Jan 01 00:00:01 1970 -0002) {'user': 'test'}
 
--- a/tests/test-persistent-nodemap.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-persistent-nodemap.t	Tue Apr 06 18:55:19 2021 +0200
@@ -60,7 +60,8 @@
   copies-sdc:          no
   revlog-v2:           no
   plain-cl-delta:     yes
-  compression:        zlib
+  compression:        zlib (no-zstd !)
+  compression:        zstd (zstd !)
   compression-level:  default
   $ hg debugbuilddag .+5000 --new-file
 
@@ -579,13 +580,15 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ hg debugupgraderepo --run --no-backup
   upgrade will perform the following actions:
   
   requirements
-     preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store
+     preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd !)
+     preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd !)
      removed: persistent-nodemap
   
   processed revlogs:
@@ -624,13 +627,15 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ hg debugupgraderepo --run --no-backup
   upgrade will perform the following actions:
   
   requirements
-     preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store
+     preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd !)
+     preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd !)
      added: persistent-nodemap
   
   persistent-nodemap
@@ -669,7 +674,8 @@
   upgrade will perform the following actions:
   
   requirements
-     preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlogv1, sparserevlog, store
+     preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlogv1, sparserevlog, store (no-zstd !)
+     preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd !)
   
   optimisations: re-delta-all
   
@@ -744,11 +750,13 @@
   $ hg clone -U --stream --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/test-repo stream-clone --debug | egrep '00(changelog|manifest)'
   adding [s] 00manifest.n (70 bytes)
   adding [s] 00manifest.i (313 KB)
-  adding [s] 00manifest.d (452 KB)
+  adding [s] 00manifest.d (452 KB) (no-zstd !)
+  adding [s] 00manifest.d (491 KB) (zstd !)
   adding [s] 00manifest-*.nd (118 KB) (glob)
   adding [s] 00changelog.n (70 bytes)
   adding [s] 00changelog.i (313 KB)
-  adding [s] 00changelog.d (360 KB)
+  adding [s] 00changelog.d (360 KB) (no-zstd !)
+  adding [s] 00changelog.d (368 KB) (zstd !)
   adding [s] 00changelog-*.nd (118 KB) (glob)
   $ ls -1 stream-clone/.hg/store/ | egrep '00(changelog|manifest)(\.n|-.*\.nd)'
   00changelog-*.nd (glob)
--- a/tests/test-phases.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-phases.t	Tue Apr 06 18:55:19 2021 +0200
@@ -886,6 +886,7 @@
   dotencode
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -913,6 +914,7 @@
   fncache
   generaldelta
   internal-phase
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-remotefilelog-bgprefetch.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-remotefilelog-bgprefetch.t	Tue Apr 06 18:55:19 2021 +0200
@@ -29,8 +29,10 @@
 
   $ hgcloneshallow ssh://user@dummy/master shallow --noupdate
   streaming all changes
-  2 files to transfer, 776 bytes of data
-  transferred 776 bytes in * seconds (*/sec) (glob)
+  2 files to transfer, 776 bytes of data (no-zstd !)
+  transferred 776 bytes in * seconds (*/sec) (glob) (no-zstd !)
+  2 files to transfer, 784 bytes of data (zstd !)
+  transferred 784 bytes in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
 
--- a/tests/test-remotefilelog-clone-tree.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-remotefilelog-clone-tree.t	Tue Apr 06 18:55:19 2021 +0200
@@ -30,6 +30,7 @@
   exp-remotefilelog-repo-req-1
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -71,6 +72,7 @@
   exp-remotefilelog-repo-req-1
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -112,6 +114,7 @@
   exp-remotefilelog-repo-req-1
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-remotefilelog-clone.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-remotefilelog-clone.t	Tue Apr 06 18:55:19 2021 +0200
@@ -27,6 +27,7 @@
   exp-remotefilelog-repo-req-1
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -61,6 +62,7 @@
   exp-remotefilelog-repo-req-1
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -110,6 +112,7 @@
   exp-remotefilelog-repo-req-1
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-remotefilelog-log.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-remotefilelog-log.t	Tue Apr 06 18:55:19 2021 +0200
@@ -30,6 +30,7 @@
   exp-remotefilelog-repo-req-1
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-remotefilelog-partial-shallow.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-remotefilelog-partial-shallow.t	Tue Apr 06 18:55:19 2021 +0200
@@ -18,8 +18,10 @@
 
   $ hg clone --shallow ssh://user@dummy/master shallow --noupdate --config remotefilelog.includepattern=foo
   streaming all changes
-  3 files to transfer, 336 bytes of data
-  transferred 336 bytes in * seconds (*/sec) (glob)
+  3 files to transfer, 336 bytes of data (no-zstd !)
+  transferred 336 bytes in * seconds (* */sec) (glob) (no-zstd !)
+  3 files to transfer, 338 bytes of data (zstd !)
+  transferred 338 bytes in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   $ cat >> shallow/.hg/hgrc <<EOF
--- a/tests/test-remotefilelog-prefetch.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-remotefilelog-prefetch.t	Tue Apr 06 18:55:19 2021 +0200
@@ -22,8 +22,10 @@
 
   $ hgcloneshallow ssh://user@dummy/master shallow --noupdate
   streaming all changes
-  2 files to transfer, 528 bytes of data
-  transferred 528 bytes in * seconds (*/sec) (glob)
+  2 files to transfer, 528 bytes of data (no-zstd !)
+  transferred 528 bytes in * seconds (* */sec) (glob) (no-zstd !)
+  2 files to transfer, 532 bytes of data (zstd !)
+  transferred 532 bytes in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   $ cd shallow
@@ -164,8 +166,10 @@
 
   $ hgcloneshallow ssh://user@dummy/master shallow2
   streaming all changes
-  2 files to transfer, 528 bytes of data
-  transferred 528 bytes in * seconds * (glob)
+  2 files to transfer, 528 bytes of data (no-zstd !)
+  transferred 528 bytes in * seconds * (glob) (no-zstd !)
+  2 files to transfer, 532 bytes of data (zstd !)
+  transferred 532 bytes in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   updating to branch default
--- a/tests/test-remotefilelog-sparse.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-remotefilelog-sparse.t	Tue Apr 06 18:55:19 2021 +0200
@@ -22,8 +22,10 @@
 
   $ hgcloneshallow ssh://user@dummy/master shallow --noupdate
   streaming all changes
-  2 files to transfer, 527 bytes of data
-  transferred 527 bytes in 0.* seconds (*/sec) (glob)
+  2 files to transfer, 527 bytes of data (no-zstd !)
+  transferred 527 bytes in * seconds (* */sec) (glob) (no-zstd !)
+  2 files to transfer, 534 bytes of data (zstd !)
+  transferred 534 bytes in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   $ cd shallow
@@ -73,8 +75,10 @@
 
   $ hgcloneshallow ssh://user@dummy/master shallow2
   streaming all changes
-  2 files to transfer, 527 bytes of data
-  transferred 527 bytes in 0.* seconds (*) (glob)
+  2 files to transfer, 527 bytes of data (no-zstd !)
+  transferred 527 bytes in * seconds (*) (glob) (no-zstd !)
+  2 files to transfer, 534 bytes of data (zstd !)
+  transferred 534 bytes in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   updating to branch default
--- a/tests/test-remotefilelog-tags.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-remotefilelog-tags.t	Tue Apr 06 18:55:19 2021 +0200
@@ -18,8 +18,10 @@
 
   $ hg clone --shallow ssh://user@dummy/master shallow --noupdate --config remotefilelog.excludepattern=.hgtags
   streaming all changes
-  3 files to transfer, 662 bytes of data
-  transferred 662 bytes in * seconds (*/sec) (glob)
+  3 files to transfer, 662 bytes of data (no-zstd !)
+  transferred 662 bytes in * seconds (* */sec) (glob) (no-zstd !)
+  3 files to transfer, 665 bytes of data (zstd !)
+  transferred 665 bytes in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   $ cat >> shallow/.hg/hgrc <<EOF
--- a/tests/test-requires.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-requires.t	Tue Apr 06 18:55:19 2021 +0200
@@ -53,6 +53,7 @@
   featuresetup-test
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-revlog-v2.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-revlog-v2.t	Tue Apr 06 18:55:19 2021 +0200
@@ -24,6 +24,7 @@
   dotencode
   exp-revlogv2.2
   fncache
+  revlog-compression-zstd (zstd !)
   sparserevlog
   store
 
--- a/tests/test-rhg.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-rhg.t	Tue Apr 06 18:55:19 2021 +0200
@@ -176,6 +176,7 @@
   dotencode
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-sidedata.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-sidedata.t	Tue Apr 06 18:55:19 2021 +0200
@@ -60,7 +60,8 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ hg debugformat -v -R up-no-side-data --config format.exp-use-side-data=yes
   format-variant     repo config default
@@ -73,7 +74,8 @@
   copies-sdc:          no     no      no
   revlog-v2:           no    yes      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ hg debugupgraderepo -R up-no-side-data --config format.exp-use-side-data=yes > /dev/null
 
@@ -92,7 +94,8 @@
   copies-sdc:          no     no      no
   revlog-v2:          yes     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ hg debugformat -v -R up-side-data --config format.exp-use-side-data=no
   format-variant     repo config default
@@ -105,6 +108,7 @@
   copies-sdc:          no     no      no
   revlog-v2:          yes     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ hg debugupgraderepo -R up-side-data --config format.exp-use-side-data=no > /dev/null
--- a/tests/test-sparse-requirement.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-sparse-requirement.t	Tue Apr 06 18:55:19 2021 +0200
@@ -20,6 +20,7 @@
   dotencode
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -38,6 +39,7 @@
   exp-sparse
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -57,6 +59,7 @@
   dotencode
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-sqlitestore.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-sqlitestore.t	Tue Apr 06 18:55:19 2021 +0200
@@ -17,6 +17,7 @@
   dotencode
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -31,6 +32,7 @@
   exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$ (no-zstd !)
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -49,6 +51,7 @@
   exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
@@ -62,6 +65,7 @@
   exp-sqlite-comp-001=none
   fncache
   generaldelta
+  revlog-compression-zstd (zstd !)
   revlogv1
   sparserevlog
   store
--- a/tests/test-ssh-bundle1.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-ssh-bundle1.t	Tue Apr 06 18:55:19 2021 +0200
@@ -72,8 +72,10 @@
 
   $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" --stream ssh://user@dummy/remote local-stream
   streaming all changes
-  4 files to transfer, 602 bytes of data
-  transferred 602 bytes in * seconds (*) (glob)
+  4 files to transfer, 602 bytes of data (no-zstd !)
+  transferred 602 bytes in * seconds (*) (glob) (no-zstd !)
+  4 files to transfer, 621 bytes of data (zstd !)
+  transferred 621 bytes in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   updating to branch default
@@ -94,8 +96,10 @@
   $ hg -R local-stream book mybook
   $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" --stream ssh://user@dummy/local-stream stream2
   streaming all changes
-  4 files to transfer, 602 bytes of data
-  transferred 602 bytes in * seconds (*) (glob)
+  4 files to transfer, 602 bytes of data (no-zstd !)
+  transferred 602 bytes in * seconds (*) (glob) (no-zstd !)
+  4 files to transfer, 621 bytes of data (zstd !)
+  transferred 621 bytes in * seconds (* */sec) (glob) (zstd !)
   searching for changes
   no changes found
   updating to branch default
--- a/tests/test-ssh.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-ssh.t	Tue Apr 06 18:55:19 2021 +0200
@@ -64,8 +64,10 @@
 
   $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" --stream ssh://user@dummy/remote local-stream
   streaming all changes
-  8 files to transfer, 827 bytes of data
-  transferred 827 bytes in * seconds (*) (glob)
+  8 files to transfer, 827 bytes of data (no-zstd !)
+  transferred 827 bytes in * seconds (*) (glob) (no-zstd !)
+  8 files to transfer, 846 bytes of data (zstd !)
+  transferred * bytes in * seconds (* */sec) (glob) (zstd !)
   updating to branch default
   2 files updated, 0 files merged, 0 files removed, 0 files unresolved
   $ cd local-stream
--- a/tests/test-stream-bundle-v2.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-stream-bundle-v2.t	Tue Apr 06 18:55:19 2021 +0200
@@ -46,9 +46,11 @@
   $ hg bundle -a --type="none-v2;stream=v2" bundle.hg
   $ hg debugbundle bundle.hg
   Stream params: {}
-  stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True)
+  stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (no-zstd !)
+  stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (zstd !)
   $ hg debugbundle --spec bundle.hg
-  none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore
+  none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore (no-zstd !)
+  none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (zstd !)
 
 Test that we can apply the bundle as a stream clone bundle
 
--- a/tests/test-treemanifest.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-treemanifest.t	Tue Apr 06 18:55:19 2021 +0200
@@ -832,7 +832,8 @@
 
 Packed bundle
   $ hg -R deeprepo debugcreatestreamclonebundle repo-packed.hg
-  writing 5330 bytes for 18 files
+  writing 5330 bytes for 18 files (no-zstd !)
+  writing 5400 bytes for 18 files (zstd !)
   bundle requirements: generaldelta, revlogv1, sparserevlog, treemanifest
   $ hg debugbundle --spec repo-packed.hg
   none-packed1;requirements%3Dgeneraldelta%2Crevlogv1%2Csparserevlog%2Ctreemanifest
--- a/tests/test-upgrade-repo.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-upgrade-repo.t	Tue Apr 06 18:55:19 2021 +0200
@@ -78,7 +78,8 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zlib   zlib    zstd (zstd !)
   compression-level:  default default default
   $ hg debugformat --verbose --config format.usefncache=no
   format-variant     repo config default
@@ -91,7 +92,8 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zlib   zlib    zstd (zstd !)
   compression-level:  default default default
   $ hg debugformat --verbose --config format.usefncache=no --color=debug
   format-variant     repo config default
@@ -104,7 +106,8 @@
   [formatvariant.name.uptodate|copies-sdc:        ][formatvariant.repo.uptodate|  no][formatvariant.config.default|     no][formatvariant.default|      no]
   [formatvariant.name.uptodate|revlog-v2:         ][formatvariant.repo.uptodate|  no][formatvariant.config.default|     no][formatvariant.default|      no]
   [formatvariant.name.uptodate|plain-cl-delta:    ][formatvariant.repo.uptodate| yes][formatvariant.config.default|    yes][formatvariant.default|     yes]
-  [formatvariant.name.uptodate|compression:       ][formatvariant.repo.uptodate| zlib][formatvariant.config.default|   zlib][formatvariant.default|    zlib]
+  [formatvariant.name.uptodate|compression:       ][formatvariant.repo.uptodate| zlib][formatvariant.config.default|   zlib][formatvariant.default|    zlib] (no-zstd !)
+  [formatvariant.name.mismatchdefault|compression:       ][formatvariant.repo.mismatchdefault| zlib][formatvariant.config.special|   zlib][formatvariant.default|    zstd] (zstd !)
   [formatvariant.name.uptodate|compression-level: ][formatvariant.repo.uptodate| default][formatvariant.config.default| default][formatvariant.default| default]
   $ hg debugformat -Tjson
   [
@@ -164,7 +167,8 @@
    },
    {
     "config": "zlib",
-    "default": "zlib",
+    "default": "zlib", (no-zstd !)
+    "default": "zstd", (zstd !)
     "name": "compression",
     "repo": "zlib"
    },
@@ -323,7 +327,8 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zlib   zlib    zstd (zstd !)
   compression-level:  default default default
   $ hg debugformat --verbose --config format.usegeneraldelta=no
   format-variant     repo config default
@@ -336,7 +341,8 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zlib   zlib    zstd (zstd !)
   compression-level:  default default default
   $ hg debugformat --verbose --config format.usegeneraldelta=no --color=debug
   format-variant     repo config default
@@ -349,7 +355,8 @@
   [formatvariant.name.uptodate|copies-sdc:        ][formatvariant.repo.uptodate|  no][formatvariant.config.default|     no][formatvariant.default|      no]
   [formatvariant.name.uptodate|revlog-v2:         ][formatvariant.repo.uptodate|  no][formatvariant.config.default|     no][formatvariant.default|      no]
   [formatvariant.name.uptodate|plain-cl-delta:    ][formatvariant.repo.uptodate| yes][formatvariant.config.default|    yes][formatvariant.default|     yes]
-  [formatvariant.name.uptodate|compression:       ][formatvariant.repo.uptodate| zlib][formatvariant.config.default|   zlib][formatvariant.default|    zlib]
+  [formatvariant.name.uptodate|compression:       ][formatvariant.repo.uptodate| zlib][formatvariant.config.default|   zlib][formatvariant.default|    zlib] (no-zstd !)
+  [formatvariant.name.mismatchdefault|compression:       ][formatvariant.repo.mismatchdefault| zlib][formatvariant.config.special|   zlib][formatvariant.default|    zstd] (zstd !)
   [formatvariant.name.uptodate|compression-level: ][formatvariant.repo.uptodate| default][formatvariant.config.default| default][formatvariant.default| default]
   $ hg debugupgraderepo
   repository lacks features recommended by current config options:
@@ -1293,7 +1300,8 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zstd   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zlib    zstd (zstd !)
   compression-level:  default default default
   $ cat .hg/requires
   dotencode
@@ -1329,7 +1337,8 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zlib   zlib    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zlib   zlib    zstd (zstd !)
   compression-level:  default default default
   $ cat .hg/requires
   dotencode
@@ -1368,7 +1377,8 @@
   copies-sdc:          no     no      no
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
-  compression:        zstd   zstd    zlib
+  compression:        zlib   zlib    zlib (no-zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ cat .hg/requires
   dotencode
@@ -1413,7 +1423,7 @@
   revlog-v2:          yes     no      no
   plain-cl-delta:     yes    yes     yes
   compression:        zlib   zlib    zlib (no-zstd !)
-  compression:        zstd   zstd    zlib (zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ cat .hg/requires
   dotencode
@@ -1457,7 +1467,7 @@
   revlog-v2:           no     no      no
   plain-cl-delta:     yes    yes     yes
   compression:        zlib   zlib    zlib (no-zstd !)
-  compression:        zstd   zstd    zlib (zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ cat .hg/requires
   dotencode
@@ -1501,7 +1511,7 @@
   revlog-v2:          yes    yes      no
   plain-cl-delta:     yes    yes     yes
   compression:        zlib   zlib    zlib (no-zstd !)
-  compression:        zstd   zstd    zlib (zstd !)
+  compression:        zstd   zstd    zstd (zstd !)
   compression-level:  default default default
   $ cat .hg/requires
   dotencode
--- a/tests/test-wireproto-command-rawstorefiledata.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-wireproto-command-rawstorefiledata.t	Tue Apr 06 18:55:19 2021 +0200
@@ -56,14 +56,17 @@
   response: gen[
     {
       b'filecount': 1,
-      b'totalsize': 527
+      b'totalsize': 527 (no-zstd !)
+      b'totalsize': 530 (zstd !)
     },
     {
       b'location': b'store',
       b'path': b'00changelog.i',
-      b'size': 527
+      b'size': 527 (no-zstd !)
+      b'size': 530 (zstd !)
     },
-    b'\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x00@\x00\x00\x00?\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff3\x90\xef\x85\x00s\xfb\xc2\xf0\xdf\xff"D4,\x8e\x92)\x01:\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u992f4779029a3df8d0666d00bb924f69634e2641\ntest\n0 0\na\nb\n\ncommit 0\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00>\x00\x00\x00=\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xffD2\xd86&\xe8\xa9\x86U\xf0b\xec\x1f*C\xb0\x7f\x7f\xbb\xb0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00ua988fb43583e871d1ed5750ee074c6d840bbbfc8\ntest\n0 0\na\n\ncommit 1\x00\x00\x00\x00\x00~\x00\x00\x00\x00\x00N\x00\x00\x00W\x00\x00\x00\x02\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xa4r\xd2\xea\x96U\x1a\x1e\xbb\x011-\xb2\xe6\xa7\x86\xd0F\x96o\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c%\xc5\xc1\t\xc0 \x0c\x05\xd0{\xa6p\x03cjI\xd71\xf9\x11<H\xa1u\x7fJ\xf1]\x9eyu\x98\xa2\xb0Z\x88jk0\x11\x95z\xa0\xdb\x11\\\x81S\xfc*\xb4\xe2]\xc4\x89\t\xe3\xe1\xec;\xfc\x95\x1c\xbbN\xe4\xf7\x9cc%\xf9\x00S#\x19\x13\x00\x00\x00\x00\x00\xcc\x00\x00\x00\x00\x00C\x00\x00\x00B\x00\x00\x00\x03\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x85kg{\x94a\x12i\xc5lW5[\x85\xf9\x95|\xfc\xc1\xb9\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u90231ddca36fa178a0eed99bd03078112487dda3\ntest\n0 0\ndir1/f\n\ncommit 3',
+    b'\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x00@\x00\x00\x00?\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff3\x90\xef\x85\x00s\xfb\xc2\xf0\xdf\xff"D4,\x8e\x92)\x01:\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u992f4779029a3df8d0666d00bb924f69634e2641\ntest\n0 0\na\nb\n\ncommit 0\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00>\x00\x00\x00=\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xffD2\xd86&\xe8\xa9\x86U\xf0b\xec\x1f*C\xb0\x7f\x7f\xbb\xb0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00ua988fb43583e871d1ed5750ee074c6d840bbbfc8\ntest\n0 0\na\n\ncommit 1\x00\x00\x00\x00\x00~\x00\x00\x00\x00\x00N\x00\x00\x00W\x00\x00\x00\x02\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xa4r\xd2\xea\x96U\x1a\x1e\xbb\x011-\xb2\xe6\xa7\x86\xd0F\x96o\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c%\xc5\xc1\t\xc0 \x0c\x05\xd0{\xa6p\x03cjI\xd71\xf9\x11<H\xa1u\x7fJ\xf1]\x9eyu\x98\xa2\xb0Z\x88jk0\x11\x95z\xa0\xdb\x11\\\x81S\xfc*\xb4\xe2]\xc4\x89\t\xe3\xe1\xec;\xfc\x95\x1c\xbbN\xe4\xf7\x9cc%\xf9\x00S#\x19\x13\x00\x00\x00\x00\x00\xcc\x00\x00\x00\x00\x00C\x00\x00\x00B\x00\x00\x00\x03\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x85kg{\x94a\x12i\xc5lW5[\x85\xf9\x95|\xfc\xc1\xb9\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u90231ddca36fa178a0eed99bd03078112487dda3\ntest\n0 0\ndir1/f\n\ncommit 3', (no-zstd !)
+    b'\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x00@\x00\x00\x00?\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff3\x90\xef\x85\x00s\xfb\xc2\xf0\xdf\xff"D4,\x8e\x92)\x01:\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u992f4779029a3df8d0666d00bb924f69634e2641\ntest\n0 0\na\nb\n\ncommit 0\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00>\x00\x00\x00=\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xffD2\xd86&\xe8\xa9\x86U\xf0b\xec\x1f*C\xb0\x7f\x7f\xbb\xb0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00ua988fb43583e871d1ed5750ee074c6d840bbbfc8\ntest\n0 0\na\n\ncommit 1\x00\x00\x00\x00\x00~\x00\x00\x00\x00\x00Q\x00\x00\x00W\x00\x00\x00\x02\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xa4r\xd2\xea\x96U\x1a\x1e\xbb\x011-\xb2\xe6\xa7\x86\xd0F\x96o\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00(\xb5/\xfd WE\x02\x00r\x04\x0f\x14\x90\x01\x0e#\xf7h$;NQC%\xf8f\xd7\xb1\x81\x8d+\x01\x16+)5\xa8\x19\xdaA\xae\xe3\x00\xe9v\xe2l\x05v\x19\x11\xd4\xc1onK\xa2\x17c\xb4\xf3\xe7 z\x13\x8f\x1c\xf3j4\x03\x03\x00`\x06\x84\x8b\x1a\n\x14\x00\x00\x00\x00\x00\xcf\x00\x00\x00\x00\x00C\x00\x00\x00B\x00\x00\x00\x03\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x85kg{\x94a\x12i\xc5lW5[\x85\xf9\x95|\xfc\xc1\xb9\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u90231ddca36fa178a0eed99bd03078112487dda3\ntest\n0 0\ndir1/f\n\ncommit 3', (zstd !)
     b''
   ]
 
@@ -78,14 +81,17 @@
   response: gen[
     {
       b'filecount': 1,
-      b'totalsize': 584
+      b'totalsize': 584 (no-zstd !)
+      b'totalsize': 588 (zstd !)
     },
     {
       b'location': b'store',
       b'path': b'00manifest.i',
-      b'size': 584
+      b'size': 584 (no-zstd !)
+      b'size': 588 (zstd !)
     },
-    b'\x00\x03\x00\x01\x00\x00\x00\x00\x00\x00\x00I\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c\r\xca\xc1\x11\x00!\x08\x040\xdfV\x03+\xa2\x94\xb3\x8c\xd0\x7f\twy\x87\x03i\x95r\x96F6\xe5\x1c\x9a\x10-\x16\xba|\x07\xab\xe5\xd1\xf08s\\\x8d\xc2\xbeo)w\xa9\x8b;\xa2\xff\x95\x19\x02jB\xab\x0c\xea\xf3\x03\xcf\x1d\x16\t\x00\x00\x00\x00\x00I\x00\x00\x00\x00\x007\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xff\xa9\x88\xfbCX>\x87\x1d\x1e\xd5u\x0e\xe0t\xc6\xd8@\xbb\xbf\xc8\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x009a38122997b3ac97be2a9aa2e556838341fdf2cc\n\x00\x00\x00\x00\x00\x80\x00\x00\x00\x00\x00\x8c\x00\x00\x01\x16\x00\x00\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xbcL\xdb}\x10{\xe2w\xaa\xdb"rC\xdf\xb3\xe0M\xd5,\x81\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c%\xcd\xb9\rB1\x10\x00Q\xc7\xbf\x19\xf6\xb6\xdd\x08\xb9\xf7\x92H\xa9\x90\xd2\xb8\x82\xc9\x9e4c\x8c\xfb\xf8\xf7\xca\xc7\x13n16\x8a\x88\xb2\xd8\x818`\xb4=eF\xb9f\x17\xcc\x92\x94hR\xc0\xeb\xe7s(/\x02\xcb\xd8\x13K\tU m\t\x1f\xef\xb2D\x03\xa6\xb6\x14\xb2\xaf\xc7[\rw?\x16`\xce\xd0"\x9c,\xddK\xd0c/\rIX4\xc3\xbc\xe4\xef{ u\xcc\x8c\x9c\x93]\x0f\x9cM;\n\xb7\x12-X\x1c\x96\x9fuT\xc8\xf5\x06\x88\xa25W\x00\x00\x00\x00\x01\x0c\x00\x00\x00\x00\x00<\x00\x00\x01\x16\x00\x00\x00\x02\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x90#\x1d\xdc\xa3o\xa1x\xa0\xee\xd9\x9b\xd00x\x11$\x87\xdd\xa3\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xe6\x00\x00\x01\x16\x00\x00\x000dir1/f\x0028c776ae08d0d55eb40648b401b90ff54448348e\n',
+    b'\x00\x03\x00\x01\x00\x00\x00\x00\x00\x00\x00I\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c\r\xca\xc1\x11\x00!\x08\x040\xdfV\x03+\xa2\x94\xb3\x8c\xd0\x7f\twy\x87\x03i\x95r\x96F6\xe5\x1c\x9a\x10-\x16\xba|\x07\xab\xe5\xd1\xf08s\\\x8d\xc2\xbeo)w\xa9\x8b;\xa2\xff\x95\x19\x02jB\xab\x0c\xea\xf3\x03\xcf\x1d\x16\t\x00\x00\x00\x00\x00I\x00\x00\x00\x00\x007\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xff\xa9\x88\xfbCX>\x87\x1d\x1e\xd5u\x0e\xe0t\xc6\xd8@\xbb\xbf\xc8\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x009a38122997b3ac97be2a9aa2e556838341fdf2cc\n\x00\x00\x00\x00\x00\x80\x00\x00\x00\x00\x00\x8c\x00\x00\x01\x16\x00\x00\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xbcL\xdb}\x10{\xe2w\xaa\xdb"rC\xdf\xb3\xe0M\xd5,\x81\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c%\xcd\xb9\rB1\x10\x00Q\xc7\xbf\x19\xf6\xb6\xdd\x08\xb9\xf7\x92H\xa9\x90\xd2\xb8\x82\xc9\x9e4c\x8c\xfb\xf8\xf7\xca\xc7\x13n16\x8a\x88\xb2\xd8\x818`\xb4=eF\xb9f\x17\xcc\x92\x94hR\xc0\xeb\xe7s(/\x02\xcb\xd8\x13K\tU m\t\x1f\xef\xb2D\x03\xa6\xb6\x14\xb2\xaf\xc7[\rw?\x16`\xce\xd0"\x9c,\xddK\xd0c/\rIX4\xc3\xbc\xe4\xef{ u\xcc\x8c\x9c\x93]\x0f\x9cM;\n\xb7\x12-X\x1c\x96\x9fuT\xc8\xf5\x06\x88\xa25W\x00\x00\x00\x00\x01\x0c\x00\x00\x00\x00\x00<\x00\x00\x01\x16\x00\x00\x00\x02\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x90#\x1d\xdc\xa3o\xa1x\xa0\xee\xd9\x9b\xd00x\x11$\x87\xdd\xa3\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xe6\x00\x00\x01\x16\x00\x00\x000dir1/f\x0028c776ae08d0d55eb40648b401b90ff54448348e\n', (no-zstd !)
+    b'\x00\x03\x00\x01\x00\x00\x00\x00\x00\x00\x00H\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00(\xb5/\xfd V\xfd\x01\x00b\xc5\x0e\x0f\xc0\xd1\x00\xfb\x0c\xb9\xca\xdf\xb2R\xba!\xf2\xf6\x1d\x80\xd5\x95Yc\xef9DaT\xcefcM\xf1\x12\t\x84\xf3\x1a\x04\x04N\\\'S\xf2\'\x8cz5\xc5\x9f\xfa\x18\xf3\x82W\x1a\x83Y\xe8\xf0\x00\x00\x00\x00\x00\x00H\x00\x00\x00\x00\x007\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xff\xa9\x88\xfbCX>\x87\x1d\x1e\xd5u\x0e\xe0t\xc6\xd8@\xbb\xbf\xc8\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x009a38122997b3ac97be2a9aa2e556838341fdf2cc\n\x00\x00\x00\x00\x00\x7f\x00\x00\x00\x00\x00\x91\x00\x00\x01\x16\x00\x00\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xbcL\xdb}\x10{\xe2w\xaa\xdb"rC\xdf\xb3\xe0M\xd5,\x81\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00(\xb5/\xfd \xccE\x04\x00bK\x1e\x17\xb0A0\xff\xff\x9b\xb5V\x99\x99\xfa\xb6\xae\xf5n),"\xf1\n\x02\xb5\x07\x82++\xd1]T\x1b3\xaa\x8e\x10+)R\xa6\\\x9a\x10\xab+\xb4\x8bB\x9f\x13U\xd4\x98\xbd\xde \x9a\xf4\xd1}[\xfb{,q\x14Kf\x06\x1e\x10\xd6\x17\xbbl\x90\x16\xb9\xb3\xd8\x07\xee\xfc\xa8\x8eI\x10]\x9c\x1ava\x054W\xad\xdf\xb3\x18\xee\xbdd\x15\xdf$\x85St\n\xde\xee?\x91\xa0\x83\x11\x08\xd8\x01\x80\x10B\x04\x00\x04S\x04B\xc7Tw\x9f\xb9,\x00\x00\x00\x00\x01\x10\x00\x00\x00\x00\x00<\x00\x00\x01\x16\x00\x00\x00\x02\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x90#\x1d\xdc\xa3o\xa1x\xa0\xee\xd9\x9b\xd00x\x11$\x87\xdd\xa3\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xe6\x00\x00\x01\x16\x00\x00\x000dir1/f\x0028c776ae08d0d55eb40648b401b90ff54448348e\n', (zstd !)
     b''
   ]
 
@@ -100,21 +106,26 @@
   response: gen[
     {
       b'filecount': 2,
-      b'totalsize': 1111
+      b'totalsize': 1111 (no-zstd !)
+      b'totalsize': 1118 (zstd !)
     },
     {
       b'location': b'store',
       b'path': b'00manifest.i',
-      b'size': 584
+      b'size': 584 (no-zstd !)
+      b'size': 588 (zstd !)
     },
-    b'\x00\x03\x00\x01\x00\x00\x00\x00\x00\x00\x00I\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c\r\xca\xc1\x11\x00!\x08\x040\xdfV\x03+\xa2\x94\xb3\x8c\xd0\x7f\twy\x87\x03i\x95r\x96F6\xe5\x1c\x9a\x10-\x16\xba|\x07\xab\xe5\xd1\xf08s\\\x8d\xc2\xbeo)w\xa9\x8b;\xa2\xff\x95\x19\x02jB\xab\x0c\xea\xf3\x03\xcf\x1d\x16\t\x00\x00\x00\x00\x00I\x00\x00\x00\x00\x007\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xff\xa9\x88\xfbCX>\x87\x1d\x1e\xd5u\x0e\xe0t\xc6\xd8@\xbb\xbf\xc8\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x009a38122997b3ac97be2a9aa2e556838341fdf2cc\n\x00\x00\x00\x00\x00\x80\x00\x00\x00\x00\x00\x8c\x00\x00\x01\x16\x00\x00\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xbcL\xdb}\x10{\xe2w\xaa\xdb"rC\xdf\xb3\xe0M\xd5,\x81\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c%\xcd\xb9\rB1\x10\x00Q\xc7\xbf\x19\xf6\xb6\xdd\x08\xb9\xf7\x92H\xa9\x90\xd2\xb8\x82\xc9\x9e4c\x8c\xfb\xf8\xf7\xca\xc7\x13n16\x8a\x88\xb2\xd8\x818`\xb4=eF\xb9f\x17\xcc\x92\x94hR\xc0\xeb\xe7s(/\x02\xcb\xd8\x13K\tU m\t\x1f\xef\xb2D\x03\xa6\xb6\x14\xb2\xaf\xc7[\rw?\x16`\xce\xd0"\x9c,\xddK\xd0c/\rIX4\xc3\xbc\xe4\xef{ u\xcc\x8c\x9c\x93]\x0f\x9cM;\n\xb7\x12-X\x1c\x96\x9fuT\xc8\xf5\x06\x88\xa25W\x00\x00\x00\x00\x01\x0c\x00\x00\x00\x00\x00<\x00\x00\x01\x16\x00\x00\x00\x02\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x90#\x1d\xdc\xa3o\xa1x\xa0\xee\xd9\x9b\xd00x\x11$\x87\xdd\xa3\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xe6\x00\x00\x01\x16\x00\x00\x000dir1/f\x0028c776ae08d0d55eb40648b401b90ff54448348e\n',
+    b'\x00\x03\x00\x01\x00\x00\x00\x00\x00\x00\x00I\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c\r\xca\xc1\x11\x00!\x08\x040\xdfV\x03+\xa2\x94\xb3\x8c\xd0\x7f\twy\x87\x03i\x95r\x96F6\xe5\x1c\x9a\x10-\x16\xba|\x07\xab\xe5\xd1\xf08s\\\x8d\xc2\xbeo)w\xa9\x8b;\xa2\xff\x95\x19\x02jB\xab\x0c\xea\xf3\x03\xcf\x1d\x16\t\x00\x00\x00\x00\x00I\x00\x00\x00\x00\x007\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xff\xa9\x88\xfbCX>\x87\x1d\x1e\xd5u\x0e\xe0t\xc6\xd8@\xbb\xbf\xc8\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x009a38122997b3ac97be2a9aa2e556838341fdf2cc\n\x00\x00\x00\x00\x00\x80\x00\x00\x00\x00\x00\x8c\x00\x00\x01\x16\x00\x00\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xbcL\xdb}\x10{\xe2w\xaa\xdb"rC\xdf\xb3\xe0M\xd5,\x81\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c%\xcd\xb9\rB1\x10\x00Q\xc7\xbf\x19\xf6\xb6\xdd\x08\xb9\xf7\x92H\xa9\x90\xd2\xb8\x82\xc9\x9e4c\x8c\xfb\xf8\xf7\xca\xc7\x13n16\x8a\x88\xb2\xd8\x818`\xb4=eF\xb9f\x17\xcc\x92\x94hR\xc0\xeb\xe7s(/\x02\xcb\xd8\x13K\tU m\t\x1f\xef\xb2D\x03\xa6\xb6\x14\xb2\xaf\xc7[\rw?\x16`\xce\xd0"\x9c,\xddK\xd0c/\rIX4\xc3\xbc\xe4\xef{ u\xcc\x8c\x9c\x93]\x0f\x9cM;\n\xb7\x12-X\x1c\x96\x9fuT\xc8\xf5\x06\x88\xa25W\x00\x00\x00\x00\x01\x0c\x00\x00\x00\x00\x00<\x00\x00\x01\x16\x00\x00\x00\x02\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x90#\x1d\xdc\xa3o\xa1x\xa0\xee\xd9\x9b\xd00x\x11$\x87\xdd\xa3\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xe6\x00\x00\x01\x16\x00\x00\x000dir1/f\x0028c776ae08d0d55eb40648b401b90ff54448348e\n', (no-zstd !)
+    b'\x00\x03\x00\x01\x00\x00\x00\x00\x00\x00\x00H\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff\x99/Gy\x02\x9a=\xf8\xd0fm\x00\xbb\x92OicN&A\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00(\xb5/\xfd V\xfd\x01\x00b\xc5\x0e\x0f\xc0\xd1\x00\xfb\x0c\xb9\xca\xdf\xb2R\xba!\xf2\xf6\x1d\x80\xd5\x95Yc\xef9DaT\xcefcM\xf1\x12\t\x84\xf3\x1a\x04\x04N\\\'S\xf2\'\x8cz5\xc5\x9f\xfa\x18\xf3\x82W\x1a\x83Y\xe8\xf0\x00\x00\x00\x00\x00\x00H\x00\x00\x00\x00\x007\x00\x00\x00V\x00\x00\x00\x00\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xff\xa9\x88\xfbCX>\x87\x1d\x1e\xd5u\x0e\xe0t\xc6\xd8@\xbb\xbf\xc8\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00+\x00\x00\x00+a\x009a38122997b3ac97be2a9aa2e556838341fdf2cc\n\x00\x00\x00\x00\x00\x7f\x00\x00\x00\x00\x00\x91\x00\x00\x01\x16\x00\x00\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xbcL\xdb}\x10{\xe2w\xaa\xdb"rC\xdf\xb3\xe0M\xd5,\x81\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00(\xb5/\xfd \xccE\x04\x00bK\x1e\x17\xb0A0\xff\xff\x9b\xb5V\x99\x99\xfa\xb6\xae\xf5n),"\xf1\n\x02\xb5\x07\x82++\xd1]T\x1b3\xaa\x8e\x10+)R\xa6\\\x9a\x10\xab+\xb4\x8bB\x9f\x13U\xd4\x98\xbd\xde \x9a\xf4\xd1}[\xfb{,q\x14Kf\x06\x1e\x10\xd6\x17\xbbl\x90\x16\xb9\xb3\xd8\x07\xee\xfc\xa8\x8eI\x10]\x9c\x1ava\x054W\xad\xdf\xb3\x18\xee\xbdd\x15\xdf$\x85St\n\xde\xee?\x91\xa0\x83\x11\x08\xd8\x01\x80\x10B\x04\x00\x04S\x04B\xc7Tw\x9f\xb9,\x00\x00\x00\x00\x01\x10\x00\x00\x00\x00\x00<\x00\x00\x01\x16\x00\x00\x00\x02\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x90#\x1d\xdc\xa3o\xa1x\xa0\xee\xd9\x9b\xd00x\x11$\x87\xdd\xa3\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xe6\x00\x00\x01\x16\x00\x00\x000dir1/f\x0028c776ae08d0d55eb40648b401b90ff54448348e\n', (zstd !)
     b'',
     {
       b'location': b'store',
       b'path': b'00changelog.i',
-      b'size': 527
+      b'size': 527 (no-zstd !)
+      b'size': 530 (zstd !)
     },
-    b'\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x00@\x00\x00\x00?\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff3\x90\xef\x85\x00s\xfb\xc2\xf0\xdf\xff"D4,\x8e\x92)\x01:\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u992f4779029a3df8d0666d00bb924f69634e2641\ntest\n0 0\na\nb\n\ncommit 0\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00>\x00\x00\x00=\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xffD2\xd86&\xe8\xa9\x86U\xf0b\xec\x1f*C\xb0\x7f\x7f\xbb\xb0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00ua988fb43583e871d1ed5750ee074c6d840bbbfc8\ntest\n0 0\na\n\ncommit 1\x00\x00\x00\x00\x00~\x00\x00\x00\x00\x00N\x00\x00\x00W\x00\x00\x00\x02\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xa4r\xd2\xea\x96U\x1a\x1e\xbb\x011-\xb2\xe6\xa7\x86\xd0F\x96o\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c%\xc5\xc1\t\xc0 \x0c\x05\xd0{\xa6p\x03cjI\xd71\xf9\x11<H\xa1u\x7fJ\xf1]\x9eyu\x98\xa2\xb0Z\x88jk0\x11\x95z\xa0\xdb\x11\\\x81S\xfc*\xb4\xe2]\xc4\x89\t\xe3\xe1\xec;\xfc\x95\x1c\xbbN\xe4\xf7\x9cc%\xf9\x00S#\x19\x13\x00\x00\x00\x00\x00\xcc\x00\x00\x00\x00\x00C\x00\x00\x00B\x00\x00\x00\x03\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x85kg{\x94a\x12i\xc5lW5[\x85\xf9\x95|\xfc\xc1\xb9\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u90231ddca36fa178a0eed99bd03078112487dda3\ntest\n0 0\ndir1/f\n\ncommit 3',
+    b'\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x00@\x00\x00\x00?\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff3\x90\xef\x85\x00s\xfb\xc2\xf0\xdf\xff"D4,\x8e\x92)\x01:\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u992f4779029a3df8d0666d00bb924f69634e2641\ntest\n0 0\na\nb\n\ncommit 0\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00>\x00\x00\x00=\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xffD2\xd86&\xe8\xa9\x86U\xf0b\xec\x1f*C\xb0\x7f\x7f\xbb\xb0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00ua988fb43583e871d1ed5750ee074c6d840bbbfc8\ntest\n0 0\na\n\ncommit 1\x00\x00\x00\x00\x00~\x00\x00\x00\x00\x00N\x00\x00\x00W\x00\x00\x00\x02\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xa4r\xd2\xea\x96U\x1a\x1e\xbb\x011-\xb2\xe6\xa7\x86\xd0F\x96o\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00x\x9c%\xc5\xc1\t\xc0 \x0c\x05\xd0{\xa6p\x03cjI\xd71\xf9\x11<H\xa1u\x7fJ\xf1]\x9eyu\x98\xa2\xb0Z\x88jk0\x11\x95z\xa0\xdb\x11\\\x81S\xfc*\xb4\xe2]\xc4\x89\t\xe3\xe1\xec;\xfc\x95\x1c\xbbN\xe4\xf7\x9cc%\xf9\x00S#\x19\x13\x00\x00\x00\x00\x00\xcc\x00\x00\x00\x00\x00C\x00\x00\x00B\x00\x00\x00\x03\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x85kg{\x94a\x12i\xc5lW5[\x85\xf9\x95|\xfc\xc1\xb9\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u90231ddca36fa178a0eed99bd03078112487dda3\ntest\n0 0\ndir1/f\n\ncommit 3', (no-zstd !)
+    b'\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x00@\x00\x00\x00?\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff\xff\xff\xff\xff3\x90\xef\x85\x00s\xfb\xc2\xf0\xdf\xff"D4,\x8e\x92)\x01:\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u992f4779029a3df8d0666d00bb924f69634e2641\ntest\n0 0\na\nb\n\ncommit 0\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00>\x00\x00\x00=\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff\xff\xff\xffD2\xd86&\xe8\xa9\x86U\xf0b\xec\x1f*C\xb0\x7f\x7f\xbb\xb0\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00ua988fb43583e871d1ed5750ee074c6d840bbbfc8\ntest\n0 0\na\n\ncommit 1\x00\x00\x00\x00\x00~\x00\x00\x00\x00\x00Q\x00\x00\x00W\x00\x00\x00\x02\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\xa4r\xd2\xea\x96U\x1a\x1e\xbb\x011-\xb2\xe6\xa7\x86\xd0F\x96o\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00(\xb5/\xfd WE\x02\x00r\x04\x0f\x14\x90\x01\x0e#\xf7h$;NQC%\xf8f\xd7\xb1\x81\x8d+\x01\x16+)5\xa8\x19\xdaA\xae\xe3\x00\xe9v\xe2l\x05v\x19\x11\xd4\xc1onK\xa2\x17c\xb4\xf3\xe7 z\x13\x8f\x1c\xf3j4\x03\x03\x00`\x06\x84\x8b\x1a\n\x14\x00\x00\x00\x00\x00\xcf\x00\x00\x00\x00\x00C\x00\x00\x00B\x00\x00\x00\x03\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x85kg{\x94a\x12i\xc5lW5[\x85\xf9\x95|\xfc\xc1\xb9\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00u90231ddca36fa178a0eed99bd03078112487dda3\ntest\n0 0\ndir1/f\n\ncommit 3', (zstd !)
     b''
   ]
 
--- a/tests/test-wireproto-exchangev2.t	Wed Apr 07 13:31:15 2021 +0200
+++ b/tests/test-wireproto-exchangev2.t	Tue Apr 06 18:55:19 2021 +0200
@@ -1099,7 +1099,8 @@
   $ cat clone-output | grep "received frame"
   received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
   received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
-  received frame(size=1275; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
+  received frame(size=1275; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation) (no-zstd !)
+  received frame(size=1283; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation) (zstd !)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
   received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
@@ -1196,7 +1197,8 @@
   $ cat clone-output | grep "received frame"
   received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
   received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
-  received frame(size=1275; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
+  received frame(size=1275; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation) (no-zstd !)
+  received frame(size=1283; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation) (zstd !)
   received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
   received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
   received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)