changeset 40642:9c3c697267db

sparse-revlog: rework the way we enforce chunk size limit

We move from a O(N) algorithm to a O(log(N)) algorithm.

The previous algorithm was traversing the whole delta chain, looking for the
exact point where it became too big. This would result in most of the delta
chain to be traversed.

Instead, we now use a "binary" approach, slicing the chain in two until we
have a chunk of the appropriate size.

We still keep the previous algorithm for the snapshots part. There are few of
them and they are large bits of data distant from each other. So the previous
algorithm should work well in that case.

To take a practical example of restoring manifest revision '59547c40bc4c' for
a reference NetBeans repository (using sparse-revlog). The media time of the
step `slice-sparse-chain` of `perfrevlogrevision` improve from 1.109 ms to
0.660 ms.

--- a/mercurial/revlogutils/deltas.py	Tue Nov 13 15:06:29 2018 +0100
+++ b/mercurial/revlogutils/deltas.py	Fri Nov 09 17:58:37 2018 +0100
@@ -79,7 +79,7 @@
     If individual revisions chunk are larger than this limit, they will still
     be raised individually.
 
-    >>> revlog = _testrevlog([
+    >>> data = [
     ...  5,  #00 (5)
     ...  10, #01 (5)
     ...  12, #02 (2)
@@ -96,7 +96,8 @@
     ...  85, #13 (11)
     ...  86, #14 (1)
     ...  91, #15 (5)
-    ... ])
+    ... ]
+    >>> revlog = _testrevlog(data, snapshot=range(16))
 
     >>> list(slicechunk(revlog, list(range(16))))
     [[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]]
@@ -133,7 +134,7 @@
     happens when "minimal gap size" interrupted the slicing or when chain are
     built in a way that create large blocks next to each other.
 
-    >>> revlog = _testrevlog([
+    >>> data = [
     ...  3,  #0 (3)
     ...  5,  #1 (2)
     ...  6,  #2 (1)
@@ -143,7 +144,10 @@
     ...  12, #6 (1)
     ...  13, #7 (1)
     ...  14, #8 (1)
-    ... ])
+    ... ]
+
+    == All snapshots cases ==
+    >>> revlog = _testrevlog(data, snapshot=range(9))
 
     Cases where chunk is already small enough
     >>> list(_slicechunktosize(revlog, [0], 3))
@@ -178,20 +182,66 @@
     [[1], [3]]
     >>> list(_slicechunktosize(revlog, [3, 4, 5], 2))
     [[3], [5]]
+
+    == No Snapshot cases ==
+    >>> revlog = _testrevlog(data)
+
+    Cases where chunk is already small enough
+    >>> list(_slicechunktosize(revlog, [0], 3))
+    [[0]]
+    >>> list(_slicechunktosize(revlog, [6, 7], 3))
+    [[6, 7]]
+    >>> list(_slicechunktosize(revlog, [0], None))
+    [[0]]
+    >>> list(_slicechunktosize(revlog, [6, 7], None))
+    [[6, 7]]
+
+    cases where we need actual slicing
+    >>> list(_slicechunktosize(revlog, [0, 1], 3))
+    [[0], [1]]
+    >>> list(_slicechunktosize(revlog, [1, 3], 3))
+    [[1], [3]]
+    >>> list(_slicechunktosize(revlog, [1, 2, 3], 3))
+    [[1], [2, 3]]
+    >>> list(_slicechunktosize(revlog, [3, 5], 3))
+    [[3], [5]]
+    >>> list(_slicechunktosize(revlog, [3, 4, 5], 3))
+    [[3], [4, 5]]
+    >>> list(_slicechunktosize(revlog, [5, 6, 7, 8], 3))
+    [[5], [6, 7, 8]]
+    >>> list(_slicechunktosize(revlog, [0, 1, 2, 3, 4, 5, 6, 7, 8], 3))
+    [[0], [1, 2], [3], [5], [6, 7, 8]]
+
+    Case with too large individual chunk (must return valid chunk)
+    >>> list(_slicechunktosize(revlog, [0, 1], 2))
+    [[0], [1]]
+    >>> list(_slicechunktosize(revlog, [1, 3], 1))
+    [[1], [3]]
+    >>> list(_slicechunktosize(revlog, [3, 4, 5], 2))
+    [[3], [5]]
+
+    == mixed case ==
+    >>> revlog = _testrevlog(data, snapshot=[0, 1, 2])
+    >>> list(_slicechunktosize(revlog, list(range(9)), 5))
+    [[0, 1], [2], [3, 4, 5], [6, 7, 8]]
     """
     assert targetsize is None or 0 <= targetsize
-    if targetsize is None or segmentspan(revlog, revs) <= targetsize:
+    startdata = revlog.start(revs[0])
+    enddata = revlog.end(revs[-1])
+    fullspan = enddata - startdata
+    if targetsize is None or fullspan <= targetsize:
         yield revs
         return
 
     startrevidx = 0
-    startdata = revlog.start(revs[0])
     endrevidx = 0
     iterrevs = enumerate(revs)
     next(iterrevs) # skip first rev.
+    # first step: get snapshots out of the way
     for idx, r in iterrevs:
         span = revlog.end(r) - startdata
-        if span <= targetsize:
+        snapshot = revlog.issnapshot(r)
+        if span <= targetsize and snapshot:
             endrevidx = idx
         else:
             chunk = _trimchunk(revlog, revs, startrevidx, endrevidx + 1)
@@ -200,7 +250,35 @@
             startrevidx = idx
             startdata = revlog.start(r)
             endrevidx = idx
-    yield _trimchunk(revlog, revs, startrevidx)
+        if not snapshot:
+            break
+
+    # for the others, we use binary slicing to quickly converge toward valid
+    # chunks (otherwise, we might end up looking for start/end of many
+    # revisions). This logic is not looking for the perfect slicing point, it
+    # focuses on quickly converging toward valid chunks.
+    nbitem = len(revs)
+    while (enddata - startdata) > targetsize:
+        endrevidx = nbitem
+        if nbitem - startrevidx <= 1:
+            break # protect against individual chunk larger than limit
+        localenddata = revlog.end(revs[endrevidx - 1])
+        span = localenddata - startdata
+        while (localenddata - startdata) > targetsize:
+            if endrevidx - startrevidx <= 1:
+                break # protect against individual chunk larger than limit
+            endrevidx -= (endrevidx - startrevidx) // 2
+            localenddata = revlog.end(revs[endrevidx - 1])
+            span = localenddata - startdata
+        chunk = _trimchunk(revlog, revs, startrevidx, endrevidx)
+        if chunk:
+            yield chunk
+        startrevidx = endrevidx
+        startdata = revlog.start(revs[startrevidx])
+
+    chunk = _trimchunk(revlog, revs, startrevidx)
+    if chunk:
+        yield chunk
 
 def _slicechunktodensity(revlog, revs, targetdensity=0.5,
                          mingapsize=0):