Mercurial > hg
changeset 8769:a5d0e821ab77
hgrc.5: reformatted to avoid big chunks of monospaced text
The man page used to have lines longer than 80 characters, even though
all lines in the hgrc.5.txt file were wrapped nicely. The problem
turned out to be that the indented paragraphs started literal blocks
instead of normal paragraphs. The literal blocks were of course not
wrapped when displayed by man.
In short, the asciidoc rules require lists to be formatted like this:
foo::
Some description of foo.
+
Another paragraph in the description of foo. It *must* start flush
left and the plus is necessary to indicate that this is a list item
continuation.
Lists with nested lists can be formatted correctly using something
called "open blocks". These blocks are used to group the list items
and are marked by a line above and below with two dashes. See the
asciidoc user guide for the gory details...
| author | Martin Geisler <mg@lazybytes.net> |
|---|---|
| date | Wed, 10 Jun 2009 00:06:20 +0200 |
| parents | 8ab07f3e0bad |
| children | cc00191314a7 |
| files | doc/hgrc.5.txt |
| diffstat | 1 files changed, 304 insertions(+), 284 deletions(-) [+] |
line wrap: on
line diff
--- a/doc/hgrc.5.txt Tue Jun 09 23:26:16 2009 +0200 +++ b/doc/hgrc.5.txt Wed Jun 10 00:06:20 2009 +0200 @@ -104,39 +104,42 @@ Aliases allow you to define your own commands in terms of other commands (or aliases), optionally including arguments. + +-- Alias definitions consist of lines of the form: -+ + <alias> = <command> [<argument]... -+ + For example, this definition: -+ + latest = log --limit 5 -+ + creates a new command `latest` that shows only the five most recent changesets. You can define subsequent aliases using earlier ones: -+ + stable5 = latest -b stable -+ + *Note*: It is possible to create aliases with the same names as existing commands, which will then override the original definitions. This is almost always a bad idea! +-- [[auth]] auth:: - Authentication credentials for HTTP authentication. Each line has - the following format: +Authentication credentials for HTTP authentication. Each line has +the following format: <name>.<argument> = <value> - - where <name> is used to group arguments into authentication entries. - Example: ++ +-- +where <name> is used to group arguments into authentication entries. +Example: foo.prefix = hg.intevation.org/mercurial foo.username = foo foo.password = bar foo.schemes = http https - Supported arguments: +Supported arguments: prefix;; Either "`*`" or a URI prefix with or without the scheme part. The @@ -157,83 +160,88 @@ static-http and static-https respectively, as well. Default: https. - If no suitable authentication entry is found, the user is prompted - for credentials as usual if required by the remote. +If no suitable authentication entry is found, the user is prompted +for credentials as usual if required by the remote. +-- [[decode]] decode/encode:: Filters for transforming files on checkout/checkin. This would typically be used for newline processing or other localization/canonicalization of files. ++ +-- +Filters consist of a filter pattern followed by a filter command. +Filter patterns are globs by default, rooted at the repository root. +For example, to match any file ending in "`.txt`" in the root +directory only, use the pattern "`*.txt`". To match any file ending in +"`.c`" anywhere in the repository, use the pattern "`**.c`". - Filters consist of a filter pattern followed by a filter command. - Filter patterns are globs by default, rooted at the repository root. - For example, to match any file ending in "`.txt`" in the root - directory only, use the pattern "`*.txt`". To match any file ending in - "`.c`" anywhere in the repository, use the pattern "`**.c`". - - The filter command can start with a specifier, either "pipe:" or - "tempfile:". If no specifier is given, "pipe:" is used by default. +The filter command can start with a specifier, either "pipe:" or +"tempfile:". If no specifier is given, "pipe:" is used by default. - A "pipe:" command must accept data on stdin and return the - transformed data on stdout. +A "pipe:" command must accept data on stdin and return the +transformed data on stdout. - Pipe example: +Pipe example: - [encode] - # uncompress gzip files on checkin to improve delta compression - # note: not necessarily a good idea, just an example - *.gz = pipe: gunzip + [encode] + # uncompress gzip files on checkin to improve delta compression + # note: not necessarily a good idea, just an example + *.gz = pipe: gunzip - [decode] - # recompress gzip files when writing them to the working dir (we - # can safely omit "pipe:", because it's the default) - *.gz = gzip + [decode] + # recompress gzip files when writing them to the working dir (we + # can safely omit "pipe:", because it's the default) + *.gz = gzip - A "tempfile:" command is a template. The string INFILE is replaced - with the name of a temporary file that contains the data to be - filtered by the command. The string OUTFILE is replaced with the - name of an empty temporary file, where the filtered data must be - written by the command. +A "tempfile:" command is a template. The string INFILE is replaced +with the name of a temporary file that contains the data to be +filtered by the command. The string OUTFILE is replaced with the +name of an empty temporary file, where the filtered data must be +written by the command. - NOTE: the tempfile mechanism is recommended for Windows systems, - where the standard shell I/O redirection operators often have - strange effects and may corrupt the contents of your files. +NOTE: the tempfile mechanism is recommended for Windows systems, +where the standard shell I/O redirection operators often have +strange effects and may corrupt the contents of your files. - The most common usage is for LF <-> CRLF translation on Windows. For - this, use the "smart" convertors which check for binary files: +The most common usage is for LF <-> CRLF translation on Windows. For +this, use the "smart" convertors which check for binary files: - [extensions] - hgext.win32text = - [encode] - ** = cleverencode: - [decode] - ** = cleverdecode: + [extensions] + hgext.win32text = + [encode] + ** = cleverencode: + [decode] + ** = cleverdecode: - or if you only want to translate certain files: +or if you only want to translate certain files: - [extensions] - hgext.win32text = - [encode] - **.txt = dumbencode: - [decode] - **.txt = dumbdecode: + [extensions] + hgext.win32text = + [encode] + **.txt = dumbencode: + [decode] + **.txt = dumbdecode: +-- [[defaults]] defaults:: Use the [defaults] section to define command defaults, i.e. the default options/arguments to pass to the specified commands. - - The following example makes 'hg log' run in verbose mode, and 'hg - status' show only the modified files, by default. ++ +-- +The following example makes 'hg log' run in verbose mode, and 'hg +status' show only the modified files, by default. - [defaults] - log = -v - status = -m + [defaults] + log = -v + status = -m - The actual commands, instead of their aliases, must be used when - defining command defaults. The command defaults will also be applied - to the aliases of the commands defined. +The actual commands, instead of their aliases, must be used when +defining command defaults. The command defaults will also be applied +to the aliases of the commands defined. +-- [[diff]] diff:: @@ -280,49 +288,53 @@ to which conversion from local encoding (`$HGENCODING`, `ui.fallbackencoding`) succeeds. If correct conversion fails, the text in question is sent as is. Defaults to empty (explicit) list. ++ +-- +Order of outgoing email charsets: - Order of outgoing email charsets: - - us-ascii always first, regardless of settings - email.charsets in order given by user - ui.fallbackencoding if not in email.charsets - $HGENCODING if not in email.charsets - utf-8 always last, regardless of settings + us-ascii always first, regardless of settings + email.charsets in order given by user + ui.fallbackencoding if not in email.charsets + $HGENCODING if not in email.charsets + utf-8 always last, regardless of settings - Email example: +Email example: - [email] - from = Joseph User <joe.user@example.com> - method = /usr/sbin/sendmail - # charsets for western europeans - # us-ascii, utf-8 omitted, as they are tried first and last - charsets = iso-8859-1, iso-8859-15, windows-1252 + [email] + from = Joseph User <joe.user@example.com> + method = /usr/sbin/sendmail + # charsets for western europeans + # us-ascii, utf-8 omitted, as they are tried first and last + charsets = iso-8859-1, iso-8859-15, windows-1252 +-- [[extensions]] extensions:: Mercurial has an extension mechanism for adding new features. To enable an extension, create an entry for it in this section. ++ +-- +If you know that the extension is already in Python's search path, +you can give the name of the module, followed by "=", with nothing +after the "=". - If you know that the extension is already in Python's search path, - you can give the name of the module, followed by "=", with nothing - after the "=". - - Otherwise, give a name that you choose, followed by "=", followed by - the path to the ".py" file (including the file name extension) that - defines the extension. +Otherwise, give a name that you choose, followed by "=", followed by +the path to the ".py" file (including the file name extension) that +defines the extension. - To explicitly disable an extension that is enabled in an hgrc of - broader scope, prepend its path with '!', as in - 'hgext.foo = !/ext/path' or 'hgext.foo = !' when path is not - supplied. +To explicitly disable an extension that is enabled in an hgrc of +broader scope, prepend its path with '!', as in +'hgext.foo = !/ext/path' or 'hgext.foo = !' when path is not +supplied. + +Example for `~/.hgrc`: - Example for `~/.hgrc`: - - [extensions] - # (the mq extension will get loaded from mercurial's path) - hgext.mq = - # (this extension will get loaded from the file specified) - myfeature = ~/.hgext/myfeature.py + [extensions] + # (the mq extension will get loaded from mercurial's path) + hgext.mq = + # (this extension will get loaded from the file specified) + myfeature = ~/.hgext/myfeature.py +-- [[format]] format:: @@ -349,81 +361,83 @@ patterns. Tools matched here will take precedence over the default merge tool. Patterns are globs by default, rooted at the repository root. - - Example: - - [merge-patterns] - **.c = kdiff3 - **.jpg = myimgmerge ++ +Example: ++ + [merge-patterns] + **.c = kdiff3 + **.jpg = myimgmerge [[merge-tools]] merge-tools:: This section configures external merge tools to use for file-level merges. - - Example `~/.hgrc`: ++ +-- +Example `~/.hgrc`: - [merge-tools] - # Override stock tool location - kdiff3.executable = ~/bin/kdiff3 - # Specify command line - kdiff3.args = $base $local $other -o $output - # Give higher priority - kdiff3.priority = 1 + [merge-tools] + # Override stock tool location + kdiff3.executable = ~/bin/kdiff3 + # Specify command line + kdiff3.args = $base $local $other -o $output + # Give higher priority + kdiff3.priority = 1 - # Define new tool - myHtmlTool.args = -m $local $other $base $output - myHtmlTool.regkey = Software\FooSoftware\HtmlMerge - myHtmlTool.priority = 1 + # Define new tool + myHtmlTool.args = -m $local $other $base $output + myHtmlTool.regkey = Software\FooSoftware\HtmlMerge + myHtmlTool.priority = 1 - Supported arguments: +Supported arguments: - priority;; - The priority in which to evaluate this tool. - Default: 0. - executable;; - Either just the name of the executable or its pathname. - Default: the tool name. - args;; - The arguments to pass to the tool executable. You can refer to the - files being merged as well as the output file through these - variables: `$base`, `$local`, `$other`, `$output`. - Default: `$local $base $other` - premerge;; - Attempt to run internal non-interactive 3-way merge tool before - launching external tool. - Default: True - binary;; - This tool can merge binary files. Defaults to False, unless tool - was selected by file pattern match. - symlink;; - This tool can merge symlinks. Defaults to False, even if tool was - selected by file pattern match. - checkconflicts;; - Check whether there are conflicts even though the tool reported - success. - Default: False - checkchanged;; - Check whether outputs were written even though the tool reported - success. - Default: False - fixeol;; - Attempt to fix up EOL changes caused by the merge tool. - Default: False - gui;; - This tool requires a graphical interface to run. Default: False - regkey;; - Windows registry key which describes install location of this - tool. Mercurial will search for this key first under - `HKEY_CURRENT_USER` and then under `HKEY_LOCAL_MACHINE`. - Default: None - regname;; - Name of value to read from specified registry key. Defaults to the - unnamed (default) value. - regappend;; - String to append to the value read from the registry, typically - the executable name of the tool. - Default: None +priority;; + The priority in which to evaluate this tool. + Default: 0. +executable;; + Either just the name of the executable or its pathname. + Default: the tool name. +args;; + The arguments to pass to the tool executable. You can refer to the + files being merged as well as the output file through these + variables: `$base`, `$local`, `$other`, `$output`. + Default: `$local $base $other` +premerge;; + Attempt to run internal non-interactive 3-way merge tool before + launching external tool. + Default: True +binary;; + This tool can merge binary files. Defaults to False, unless tool + was selected by file pattern match. +symlink;; + This tool can merge symlinks. Defaults to False, even if tool was + selected by file pattern match. +checkconflicts;; + Check whether there are conflicts even though the tool reported + success. + Default: False +checkchanged;; + Check whether outputs were written even though the tool reported + success. + Default: False +fixeol;; + Attempt to fix up EOL changes caused by the merge tool. + Default: False +gui;; + This tool requires a graphical interface to run. Default: False +regkey;; + Windows registry key which describes install location of this + tool. Mercurial will search for this key first under + `HKEY_CURRENT_USER` and then under `HKEY_LOCAL_MACHINE`. + Default: None +regname;; + Name of value to read from specified registry key. Defaults to the + unnamed (default) value. +regappend;; + String to append to the value read from the registry, typically + the executable name of the tool. + Default: None +-- [[hooks]] hooks:: @@ -432,123 +446,125 @@ hooks can be run for the same action by appending a suffix to the action. Overriding a site-wide hook can be done by changing its value or setting it to an empty string. - - Example `.hg/hgrc`: ++ +-- +Example `.hg/hgrc`: - [hooks] - # do not use the site-wide hook - incoming = - incoming.email = /my/email/hook - incoming.autobuild = /my/build/hook + [hooks] + # do not use the site-wide hook + incoming = + incoming.email = /my/email/hook + incoming.autobuild = /my/build/hook - Most hooks are run with environment variables set that give useful - additional information. For each hook below, the environment - variables it is passed are listed with names of the form "$HG_foo". +Most hooks are run with environment variables set that give useful +additional information. For each hook below, the environment +variables it is passed are listed with names of the form "$HG_foo". - changegroup;; - Run after a changegroup has been added via push, pull or unbundle. - ID of the first new changeset is in `$HG_NODE`. URL from which - changes came is in `$HG_URL`. - commit;; - Run after a changeset has been created in the local repository. ID - of the newly created changeset is in `$HG_NODE`. Parent changeset - IDs are in `$HG_PARENT1` and `$HG_PARENT2`. - incoming;; - Run after a changeset has been pulled, pushed, or unbundled into - the local repository. The ID of the newly arrived changeset is in - `$HG_NODE`. URL that was source of changes came is in `$HG_URL`. - outgoing;; - Run after sending changes from local repository to another. ID of - first changeset sent is in `$HG_NODE`. Source of operation is in - `$HG_SOURCE`; see "preoutgoing" hook for description. - post-<command>;; - Run after successful invocations of the associated command. The - contents of the command line are passed as `$HG_ARGS` and the result - code in `$HG_RESULT`. Hook failure is ignored. - pre-<command>;; - Run before executing the associated command. The contents of the - command line are passed as `$HG_ARGS`. If the hook returns failure, - the command doesn't execute and Mercurial returns the failure - code. - prechangegroup;; - Run before a changegroup is added via push, pull or unbundle. Exit - status 0 allows the changegroup to proceed. Non-zero status will - cause the push, pull or unbundle to fail. URL from which changes - will come is in `$HG_URL`. - precommit;; - Run before starting a local commit. Exit status 0 allows the - commit to proceed. Non-zero status will cause the commit to fail. - Parent changeset IDs are in `$HG_PARENT1` and `$HG_PARENT2`. - preoutgoing;; - Run before collecting changes to send from the local repository to - another. Non-zero status will cause failure. This lets you prevent - pull over http or ssh. Also prevents against local pull, push - (outbound) or bundle commands, but not effective, since you can - just copy files instead then. Source of operation is in - `$HG_SOURCE`. If "serve", operation is happening on behalf of remote - ssh or http repository. If "push", "pull" or "bundle", operation - is happening on behalf of repository on same system. - pretag;; - Run before creating a tag. Exit status 0 allows the tag to be - created. Non-zero status will cause the tag to fail. ID of - changeset to tag is in `$HG_NODE`. Name of tag is in `$HG_TAG`. Tag is - local if `$HG_LOCAL=1`, in repo if `$HG_LOCAL=0`. - pretxnchangegroup;; - Run after a changegroup has been added via push, pull or unbundle, - but before the transaction has been committed. Changegroup is - visible to hook program. This lets you validate incoming changes - before accepting them. Passed the ID of the first new changeset in - `$HG_NODE`. Exit status 0 allows the transaction to commit. Non-zero - status will cause the transaction to be rolled back and the push, - pull or unbundle will fail. URL that was source of changes is in - `$HG_URL`. - pretxncommit;; - Run after a changeset has been created but the transaction not yet - committed. Changeset is visible to hook program. This lets you - validate commit message and changes. Exit status 0 allows the - commit to proceed. Non-zero status will cause the transaction to - be rolled back. ID of changeset is in `$HG_NODE`. Parent changeset - IDs are in `$HG_PARENT1` and `$HG_PARENT2`. - preupdate;; - Run before updating the working directory. Exit status 0 allows - the update to proceed. Non-zero status will prevent the update. - Changeset ID of first new parent is in `$HG_PARENT1`. If merge, ID - of second new parent is in `$HG_PARENT2`. - tag;; - Run after a tag is created. ID of tagged changeset is in `$HG_NODE`. - Name of tag is in `$HG_TAG`. Tag is local if `$HG_LOCAL=1`, in repo if - `$HG_LOCAL=0`. - update;; - Run after updating the working directory. Changeset ID of first - new parent is in `$HG_PARENT1`. If merge, ID of second new parent is - in `$HG_PARENT2`. If the update succeeded, `$HG_ERROR=0`. If the - update failed (e.g. because conflicts not resolved), `$HG_ERROR=1`. +changegroup;; + Run after a changegroup has been added via push, pull or unbundle. + ID of the first new changeset is in `$HG_NODE`. URL from which + changes came is in `$HG_URL`. +commit;; + Run after a changeset has been created in the local repository. ID + of the newly created changeset is in `$HG_NODE`. Parent changeset + IDs are in `$HG_PARENT1` and `$HG_PARENT2`. +incoming;; + Run after a changeset has been pulled, pushed, or unbundled into + the local repository. The ID of the newly arrived changeset is in + `$HG_NODE`. URL that was source of changes came is in `$HG_URL`. +outgoing;; + Run after sending changes from local repository to another. ID of + first changeset sent is in `$HG_NODE`. Source of operation is in + `$HG_SOURCE`; see "preoutgoing" hook for description. +post-<command>;; + Run after successful invocations of the associated command. The + contents of the command line are passed as `$HG_ARGS` and the result + code in `$HG_RESULT`. Hook failure is ignored. +pre-<command>;; + Run before executing the associated command. The contents of the + command line are passed as `$HG_ARGS`. If the hook returns failure, + the command doesn't execute and Mercurial returns the failure + code. +prechangegroup;; + Run before a changegroup is added via push, pull or unbundle. Exit + status 0 allows the changegroup to proceed. Non-zero status will + cause the push, pull or unbundle to fail. URL from which changes + will come is in `$HG_URL`. +precommit;; + Run before starting a local commit. Exit status 0 allows the + commit to proceed. Non-zero status will cause the commit to fail. + Parent changeset IDs are in `$HG_PARENT1` and `$HG_PARENT2`. +preoutgoing;; + Run before collecting changes to send from the local repository to + another. Non-zero status will cause failure. This lets you prevent + pull over http or ssh. Also prevents against local pull, push + (outbound) or bundle commands, but not effective, since you can + just copy files instead then. Source of operation is in + `$HG_SOURCE`. If "serve", operation is happening on behalf of remote + ssh or http repository. If "push", "pull" or "bundle", operation + is happening on behalf of repository on same system. +pretag;; + Run before creating a tag. Exit status 0 allows the tag to be + created. Non-zero status will cause the tag to fail. ID of + changeset to tag is in `$HG_NODE`. Name of tag is in `$HG_TAG`. Tag is + local if `$HG_LOCAL=1`, in repo if `$HG_LOCAL=0`. +pretxnchangegroup;; + Run after a changegroup has been added via push, pull or unbundle, + but before the transaction has been committed. Changegroup is + visible to hook program. This lets you validate incoming changes + before accepting them. Passed the ID of the first new changeset in + `$HG_NODE`. Exit status 0 allows the transaction to commit. Non-zero + status will cause the transaction to be rolled back and the push, + pull or unbundle will fail. URL that was source of changes is in + `$HG_URL`. +pretxncommit;; + Run after a changeset has been created but the transaction not yet + committed. Changeset is visible to hook program. This lets you + validate commit message and changes. Exit status 0 allows the + commit to proceed. Non-zero status will cause the transaction to + be rolled back. ID of changeset is in `$HG_NODE`. Parent changeset + IDs are in `$HG_PARENT1` and `$HG_PARENT2`. +preupdate;; + Run before updating the working directory. Exit status 0 allows + the update to proceed. Non-zero status will prevent the update. + Changeset ID of first new parent is in `$HG_PARENT1`. If merge, ID + of second new parent is in `$HG_PARENT2`. +tag;; + Run after a tag is created. ID of tagged changeset is in `$HG_NODE`. + Name of tag is in `$HG_TAG`. Tag is local if `$HG_LOCAL=1`, in repo if + `$HG_LOCAL=0`. +update;; + Run after updating the working directory. Changeset ID of first + new parent is in `$HG_PARENT1`. If merge, ID of second new parent is + in `$HG_PARENT2`. If the update succeeded, `$HG_ERROR=0`. If the + update failed (e.g. because conflicts not resolved), `$HG_ERROR=1`. - Note: it is generally better to use standard hooks rather than the - generic pre- and post- command hooks as they are guaranteed to be - called in the appropriate contexts for influencing transactions. - Also, hooks like "commit" will be called in all contexts that - generate a commit (e.g. tag) and not just the commit command. +Note: it is generally better to use standard hooks rather than the +generic pre- and post- command hooks as they are guaranteed to be +called in the appropriate contexts for influencing transactions. +Also, hooks like "commit" will be called in all contexts that +generate a commit (e.g. tag) and not just the commit command. - Note2: Environment variables with empty values may not be passed to - hooks on platforms such as Windows. As an example, `$HG_PARENT2` will - have an empty value under Unix-like platforms for non-merge - changesets, while it will not be available at all under Windows. +Note2: Environment variables with empty values may not be passed to +hooks on platforms such as Windows. As an example, `$HG_PARENT2` will +have an empty value under Unix-like platforms for non-merge +changesets, while it will not be available at all under Windows. - The syntax for Python hooks is as follows: +The syntax for Python hooks is as follows: - hookname = python:modulename.submodule.callable - hookname = python:/path/to/python/module.py:callable + hookname = python:modulename.submodule.callable + hookname = python:/path/to/python/module.py:callable - Python hooks are run within the Mercurial process. Each hook is - called with at least three keyword arguments: a ui object (keyword - "ui"), a repository object (keyword "repo"), and a "hooktype" - keyword that tells what kind of hook is used. Arguments listed as - environment variables above are passed as keyword arguments, with no - "HG_" prefix, and names in lower case. +Python hooks are run within the Mercurial process. Each hook is +called with at least three keyword arguments: a ui object (keyword +"ui"), a repository object (keyword "repo"), and a "hooktype" +keyword that tells what kind of hook is used. Arguments listed as +environment variables above are passed as keyword arguments, with no +"HG_" prefix, and names in lower case. - If a Python hook returns a "true" value or raises an exception, this - is treated as a failure. +If a Python hook returns a "true" value or raises an exception, this +is treated as a failure. +-- [[http_proxy]] http_proxy:: @@ -644,19 +660,23 @@ user or to a trusted group. The main exception is the web interface, which automatically uses some safe settings, since it's common to serve repositories from different users. - - This section specifies what users and groups are trusted. The - current user is always trusted. To trust everybody, list a user or a - group with name "*". ++ +-- +This section specifies what users and groups are trusted. The +current user is always trusted. To trust everybody, list a user or a +group with name "*". - users;; - Comma-separated list of trusted users. - groups;; - Comma-separated list of trusted groups. +users;; + Comma-separated list of trusted users. +groups;; + Comma-separated list of trusted groups. +-- [[ui]] ui:: User interface controls. ++ +-- archivemeta;; Whether to include the .hg_archival.txt file containing metadata (hashes for the repository base and for tip) in archives created @@ -689,7 +709,7 @@ merge;; The conflict resolution program to use during a manual merge. There are some internal tools available: - ++ internal:local;; keep the local version internal:other;; @@ -698,9 +718,9 @@ use the internal non-interactive merge tool internal:fail;; fail to merge - - For more information on configuring merge tools see the - merge-tools section. ++ +For more information on configuring merge tools see the +merge-tools section. patch;; command to use to apply patches. Look for 'gpatch' or 'patch' in @@ -737,7 +757,7 @@ "username =" in the system hgrc). verbose;; Increase the amount of output printed. True or False. Default is False. - +-- [[web]] web::