wireproto: declare operation type for most commands (BC) (SEC) stable
authorGregory Szorc <gregory.szorc@gmail.com>
Tue, 20 Feb 2018 18:54:27 -0800
branchstable
changeset 36754 e3c228b4510d
parent 36753 742ce6fbc109
child 36755 ff4bc0ab6740
wireproto: declare operation type for most commands (BC) (SEC) The permissions model of hgweb relies on a dictionary to declare the operation associated with each command - either "pull" or "push." This dictionary was established by d3147b4e3e8a in 2008. Unfortunately, we neglected to update this dictionary as new wire protocol commands were introduced. This commit defines the operations of most wire protocol commands in the permissions dictionary. The "batch" command is omitted because it is special and requires a more complex solution. Since permissions checking is skipped unless a command has an entry in this dictionary (this security issue will be addressed in a subsequent commit), the practical effect of this change is that various wire protocol commands now HTTP 401 if web.deny_read or web.allow-pull, etc are set to deny access. This is reflected by test changes. Note how various `hg pull` and `hg push` operations now fail before discovery. (They fail during the initial "capabilities" request.) This change fixes a security issue where built-in wire protocol commands would return repository data even if the web config were configured to deny access to that data. I'm on the fence as to whether we should HTTP 401 the capabilities request. On one hand, it can expose repository metadata and can tell callers things like what version of Mercurial the server is running. On the other hand, a client may need to know the capabilities in order to authenticate in a follow-up request. It appears that Mercurial clients handle the HTTP 401 on *any* protocol request, so we should be OK sending a 401 for "capabilities." But if this causes problems, it should be possible to allow "capabilities" to always work. .. bc:: Various read-only wire protocol commands now return HTTP 401 Unauthorized if the hgweb configuration denies read/pull access to the repository. Previously, various wire protocol commands would still work and return data if read access was disabled.
hgext/largefiles/uisetup.py
mercurial/wireproto.py
tests/test-http-bundle1.t
tests/test-http-permissions.t
tests/test-http.t
tests/test-largefiles-wireproto.t
tests/test-pull-http.t
--- a/hgext/largefiles/uisetup.py	Tue Feb 20 18:53:39 2018 -0800
+++ b/hgext/largefiles/uisetup.py	Tue Feb 20 18:54:27 2018 -0800
@@ -177,6 +177,7 @@
     wireproto.permissions['putlfile'] = 'push'
     wireproto.permissions['getlfile'] = 'pull'
     wireproto.permissions['statlfile'] = 'pull'
+    wireproto.permissions['lheads'] = 'pull'
 
     extensions.wrapfunction(webcommands, 'decodepath', overrides.decodepath)
 
--- a/mercurial/wireproto.py	Tue Feb 20 18:53:39 2018 -0800
+++ b/mercurial/wireproto.py	Tue Feb 20 18:54:27 2018 -0800
@@ -721,6 +721,7 @@
         res.append(escapearg(result))
     return ';'.join(res)
 
+permissions['between'] = 'pull'
 @wireprotocommand('between', 'pairs')
 def between(repo, proto, pairs):
     pairs = [decodelist(p, '-') for p in pairs.split(" ")]
@@ -729,6 +730,7 @@
         r.append(encodelist(b) + "\n")
     return "".join(r)
 
+permissions['branchmap'] = 'pull'
 @wireprotocommand('branchmap')
 def branchmap(repo, proto):
     branchmap = repo.branchmap()
@@ -739,6 +741,7 @@
         heads.append('%s %s' % (branchname, branchnodes))
     return '\n'.join(heads)
 
+permissions['branches'] = 'pull'
 @wireprotocommand('branches', 'nodes')
 def branches(repo, proto, nodes):
     nodes = decodelist(nodes)
@@ -747,6 +750,7 @@
         r.append(encodelist(b) + "\n")
     return "".join(r)
 
+permissions['clonebundles'] = 'pull'
 @wireprotocommand('clonebundles', '')
 def clonebundles(repo, proto):
     """Server command for returning info for available bundles to seed clones.
@@ -809,6 +813,7 @@
 
 # If you are writing an extension and consider wrapping this function. Wrap
 # `_capabilities` instead.
+permissions['capabilities'] = 'pull'
 @wireprotocommand('capabilities')
 def capabilities(repo, proto):
     return ' '.join(_capabilities(repo, proto))
@@ -834,6 +839,7 @@
     gen = iter(lambda: cg.read(32768), '')
     return streamres(gen=gen)
 
+permissions['debugwireargs'] = 'pull'
 @wireprotocommand('debugwireargs', 'one two *')
 def debugwireargs(repo, proto, one, two, others):
     # only accept optional args from the known set
@@ -907,11 +913,13 @@
 
     return streamres(gen=chunks, prefer_uncompressed=not prefercompressed)
 
+permissions['heads'] = 'pull'
 @wireprotocommand('heads')
 def heads(repo, proto):
     h = repo.heads()
     return encodelist(h) + "\n"
 
+permissions['hello'] = 'pull'
 @wireprotocommand('hello')
 def hello(repo, proto):
     '''the hello command returns a set of lines describing various
@@ -929,6 +937,7 @@
     d = repo.listkeys(encoding.tolocal(namespace)).items()
     return pushkeymod.encodekeys(d)
 
+permissions['lookup'] = 'pull'
 @wireprotocommand('lookup', 'key')
 def lookup(repo, proto, key):
     try:
@@ -941,6 +950,7 @@
         success = 0
     return "%d %s\n" % (success, r)
 
+permissions['known'] = 'pull'
 @wireprotocommand('known', 'nodes *')
 def known(repo, proto, nodes, others):
     return ''.join(b and "1" or "0" for b in repo.known(decodelist(nodes)))
--- a/tests/test-http-bundle1.t	Tue Feb 20 18:53:39 2018 -0800
+++ b/tests/test-http-bundle1.t	Tue Feb 20 18:54:27 2018 -0800
@@ -259,60 +259,52 @@
   $ hg rollback -q
 
   $ sed 's/.*] "/"/' < ../access.log
-  "GET /?cmd=capabilities HTTP/1.1" 200 -
-  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=capabilities HTTP/1.1" 200 -
-  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=stream_out HTTP/1.1" 401 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=stream_out HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=capabilities HTTP/1.1" 200 -
-  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=capabilities HTTP/1.1" 200 -
-  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
+  "GET /?cmd=capabilities HTTP/1.1" 403 -
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
--- a/tests/test-http-permissions.t	Tue Feb 20 18:53:39 2018 -0800
+++ b/tests/test-http-permissions.t	Tue Feb 20 18:54:27 2018 -0800
@@ -63,9 +63,11 @@
   $ cat hg.pid > $DAEMON_PIDS
 
   $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
-  200 Script output follows
+  401 read not authorized
   
-  lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=$BUNDLE2_COMPRESSIONS$ (no-eol)
+  0
+  read not authorized
+  [1]
 
   $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out'
   401 read not authorized
@@ -117,8 +119,6 @@
 
   $ hg --cwd ../test2 pull http://localhost:$HGPORT/
   pulling from http://localhost:$HGPORT/
-  searching for changes
-  no changes found
   abort: authorization failed
   [255]
 
@@ -130,9 +130,11 @@
   $ cat hg.pid > $DAEMON_PIDS
 
   $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
-  200 Script output follows
+  401 read not authorized
   
-  lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=$BUNDLE2_COMPRESSIONS$ (no-eol)
+  0
+  read not authorized
+  [1]
 
   $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out'
   401 read not authorized
@@ -177,8 +179,6 @@
 
   $ hg --cwd ../test2 pull http://localhost:$HGPORT/
   pulling from http://localhost:$HGPORT/
-  searching for changes
-  no changes found
   abort: authorization failed
   [255]
 
@@ -237,8 +237,6 @@
 
   $ hg --cwd ../test2 pull http://localhost:$HGPORT/
   pulling from http://localhost:$HGPORT/
-  searching for changes
-  no changes found
   abort: authorization failed
   [255]
 
@@ -292,8 +290,6 @@
 
   $ hg --cwd ../test2 pull http://localhost:$HGPORT/
   pulling from http://localhost:$HGPORT/
-  searching for changes
-  no changes found
   abort: authorization failed
   [255]
 
@@ -501,8 +497,6 @@
 
   $ hg --cwd ../test2 pull http://localhost:$HGPORT/
   pulling from http://localhost:$HGPORT/
-  searching for changes
-  no changes found
   abort: authorization failed
   [255]
 
@@ -556,8 +550,6 @@
 
   $ hg --cwd ../test2 pull http://localhost:$HGPORT/
   pulling from http://localhost:$HGPORT/
-  searching for changes
-  no changes found
   abort: authorization failed
   [255]
 
@@ -665,8 +657,6 @@
 
   $ hg --cwd ../test2 pull http://localhost:$HGPORT/
   pulling from http://localhost:$HGPORT/
-  searching for changes
-  no changes found
   abort: authorization failed
   [255]
 
@@ -683,9 +673,11 @@
   $ cat hg.pid > $DAEMON_PIDS
 
   $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities'
-  200 Script output follows
+  401 pull not authorized
   
-  lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024 httpmediatype=0.1rx,0.1tx,0.2tx compression=$BUNDLE2_COMPRESSIONS$ (no-eol)
+  0
+  pull not authorized
+  [1]
 
   $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases'
   401 pull not authorized
@@ -730,8 +722,6 @@
 
   $ hg --cwd ../test2 pull http://localhost:$HGPORT/
   pulling from http://localhost:$HGPORT/
-  searching for changes
-  no changes found
   abort: authorization failed
   [255]
 
@@ -1487,13 +1477,11 @@
 
   $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/
   pushing to http://localhost:$HGPORT/
-  searching for changes
   abort: authorization failed
   [255]
 
   $ hg --cwd ../test2 push http://localhost:$HGPORT/
   pushing to http://localhost:$HGPORT/
-  searching for changes
   abort: authorization failed
   [255]
 
--- a/tests/test-http.t	Tue Feb 20 18:53:39 2018 -0800
+++ b/tests/test-http.t	Tue Feb 20 18:54:27 2018 -0800
@@ -254,6 +254,7 @@
   http auth: user user, password ****
   sending capabilities command
   devel-peer-request: GET http://localhost:$HGPORT2/?cmd=capabilities
+  http auth: user user, password ****
   devel-peer-request:   finished in *.???? seconds (200) (glob)
   query 1; heads
   sending batch command
@@ -270,7 +271,6 @@
   devel-peer-request:   Vary X-HgArg-1,X-HgProto-1
   devel-peer-request:   X-hgproto-1 0.1 0.2 comp=$USUAL_COMPRESSIONS$
   devel-peer-request:   16 bytes of commands arguments in headers
-  http auth: user user, password ****
   devel-peer-request:   finished in *.???? seconds (200) (glob)
   received listkey for "phases": 58 bytes
   checking for updated bookmarks
@@ -340,57 +340,49 @@
   $ hg rollback -q
 
   $ sed 's/.*] "/"/' < ../access.log
-  "GET /?cmd=capabilities HTTP/1.1" 200 -
-  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=capabilities HTTP/1.1" 200 -
-  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=stream_out HTTP/1.1" 401 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=stream_out HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=getbundle HTTP/1.1" 401 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=capabilities HTTP/1.1" 200 -
-  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=capabilities HTTP/1.1" 200 -
-  "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
+  "GET /?cmd=capabilities HTTP/1.1" 403 -
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
@@ -398,9 +390,9 @@
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=666f726365* (glob)
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
+  "GET /?cmd=capabilities HTTP/1.1" 401 -
   "GET /?cmd=capabilities HTTP/1.1" 200 -
   "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
-  "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
   "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$
--- a/tests/test-largefiles-wireproto.t	Tue Feb 20 18:53:39 2018 -0800
+++ b/tests/test-largefiles-wireproto.t	Tue Feb 20 18:54:27 2018 -0800
@@ -434,11 +434,11 @@
   > EOF
   $ hg clone --config ui.interactive=true --config extensions.getpass=get_pass.py \
   >          http://user@localhost:$HGPORT credentialclone
-  requesting all changes
   http authorization required for http://localhost:$HGPORT/
   realm: mercurial
   user: user
-  password: adding changesets
+  password: requesting all changes
+  adding changesets
   adding manifests
   adding file changes
   added 1 changesets with 1 changes to 1 files
--- a/tests/test-pull-http.t	Tue Feb 20 18:53:39 2018 -0800
+++ b/tests/test-pull-http.t	Tue Feb 20 18:54:27 2018 -0800
@@ -50,7 +50,6 @@
   $ hg serve -p $HGPORT -d --pid-file=hg.pid -E errors.log
   $ cat hg.pid >> $DAEMON_PIDS
   $ hg clone http://localhost:$HGPORT/ test4 # bundle2+
-  requesting all changes
   abort: authorization failed
   [255]
   $ hg clone http://localhost:$HGPORT/ test4 --config devel.legacy.exchange=bundle1
@@ -74,7 +73,6 @@
 
   $ req
   pulling from http://localhost:$HGPORT/
-  searching for changes
   abort: authorization failed
   % serve errors