tests/test-audit-subrepo.t

errors: raise ConfigError on failure to parse config file

This replaces two raises of `ParseError` by `ConfigError`, which makes
it so we get the desired exit code when `ui.detailed-exit-code` is
enabled. Because the exceptions include a location, I had to add that
to `ConfigError` as well. I considered making `ConfigError` a subclass
of `ParseError`, but it doesn't feel like it quite passes the "is-a"
test.

I used "config error: " as prefix for these errors instead of the
previous "hg: parse error: ", which seems a little less accurate now
(and, as I've said before, I don't know what the "hg: " part is
supposed to signify anyway). I can easily be convinced to change the
prefix to something else (including "abort: ").

Some of the exceptions raised here mean that we fail to even load the
`ui` object in the `dispatch` module. When that happens, we don't know
to use detailed exit codes, so some tests (e.g. `test-hgrc.t`) still
see exit code 255. I'll try to get back to that later. It should be
possible to give detailed exit codes if at least part of the config
can be read (e.g. when the system-wide one enables detailed exit codes
and the user's config fails to parse).

Differential Revision: https://phab.mercurial-scm.org/D9355

Test illegal name
-----------------

on commit:

  $ hg init hgname
  $ cd hgname
  $ mkdir sub
  $ hg init sub/.hg
  $ echo 'sub/.hg = sub/.hg' >> .hgsub
  $ hg ci -qAm 'add subrepo "sub/.hg"'
  abort: path 'sub/.hg' is inside nested repo 'sub'
  [255]

prepare tampered repo (including the commit above):

  $ hg import --bypass -qm 'add subrepo "sub/.hg"' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +sub/.hg = sub/.hg
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 sub/.hg
  > EOF
  $ cd ..

on clone (and update):

  $ hg clone -q hgname hgname2
  abort: path 'sub/.hg' is inside nested repo 'sub'
  [255]

Test absolute path
------------------

on commit:

  $ hg init absolutepath
  $ cd absolutepath
  $ hg init sub
  $ echo '/sub = sub' >> .hgsub
  $ hg ci -qAm 'add subrepo "/sub"'
  abort: path contains illegal component: /sub
  [255]

prepare tampered repo (including the commit above):

  $ hg import --bypass -qm 'add subrepo "/sub"' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +/sub = sub
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 /sub
  > EOF
  $ cd ..

on clone (and update):

  $ hg clone -q absolutepath absolutepath2
  abort: path contains illegal component: /sub
  [255]

Test root path
--------------

on commit:

  $ hg init rootpath
  $ cd rootpath
  $ hg init sub
  $ echo '/ = sub' >> .hgsub
  $ hg ci -qAm 'add subrepo "/"'
  abort: path ends in directory separator: /
  [255]

prepare tampered repo (including the commit above):

  $ hg import --bypass -qm 'add subrepo "/"' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +/ = sub
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 /
  > EOF
  $ cd ..

on clone (and update):

  $ hg clone -q rootpath rootpath2
  abort: path ends in directory separator: /
  [255]

Test empty path
---------------

on commit:

  $ hg init emptypath
  $ cd emptypath
  $ hg init sub
  $ echo '= sub' >> .hgsub
  $ hg ci -qAm 'add subrepo ""'
  config error at .hgsub:1: = sub
  [30]

prepare tampered repo (including the commit above):

  $ hg import --bypass -qm 'add subrepo ""' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > += sub
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000
  > EOF
  $ cd ..

on clone (and update):

  $ hg clone -q emptypath emptypath2
  config error at .hgsub:1: = sub
  [30]

Test current path
-----------------

on commit:

  $ hg init currentpath
  $ cd currentpath
  $ hg init sub
  $ echo '. = sub' >> .hgsub
  $ hg ci -qAm 'add subrepo "."'
  abort: subrepo path contains illegal component: .
  [255]

prepare tampered repo (including the commit above):

  $ hg import --bypass -qm 'add subrepo "."' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +.= sub
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 .
  > EOF
  $ cd ..

on clone (and update):

  $ hg clone -q currentpath currentpath2
  abort: subrepo path contains illegal component: .
  [255]

Test outer path
---------------

on commit:

  $ mkdir outerpath
  $ cd outerpath
  $ hg init main
  $ cd main
  $ hg init ../sub
  $ echo '../sub = ../sub' >> .hgsub
  $ hg ci -qAm 'add subrepo "../sub"'
  abort: path contains illegal component: ../sub
  [255]

prepare tampered repo (including the commit above):

  $ hg import --bypass -qm 'add subrepo "../sub"' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +../sub = ../sub
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 ../sub
  > EOF
  $ cd ..

on clone (and update):

  $ hg clone -q main main2
  abort: path contains illegal component: ../sub
  [255]
  $ cd ..

Test variable expansion
-----------------------

Subrepository paths shouldn't be expanded, but we fail to handle them
properly. Any local repository paths are expanded.

on commit:

  $ mkdir envvar
  $ cd envvar
  $ hg init main
  $ cd main
  $ hg init sub1
  $ cat <<'EOF' > sub1/hgrc
  > [hooks]
  > log = echo pwned
  > EOF
  $ hg -R sub1 ci -qAm 'add sub1 files'
  $ hg -R sub1 log -r. -T '{node}\n'
  39eb4b4d3e096527668784893a9280578a8f38b8
  $ echo '$SUB = sub1' >> .hgsub
  $ SUB=sub1 hg ci -qAm 'add subrepo "$SUB"'
  abort: subrepo path contains illegal component: $SUB
  [255]

prepare tampered repo (including the changes above as two commits):

  $ hg import --bypass -qm 'add subrepo "$SUB"' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +$SUB = sub1
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 $SUB
  > EOF
  $ hg debugsetparents 0
  $ hg import --bypass -qm 'update subrepo "$SUB"' - <<'EOF'
  > diff --git a/.hgsubstate b/.hgsubstate
  > --- a/.hgsubstate
  > +++ b/.hgsubstate
  > @@ -1,1 +1,1 @@
  > -0000000000000000000000000000000000000000 $SUB
  > +39eb4b4d3e096527668784893a9280578a8f38b8 $SUB
  > EOF
  $ cd ..

on clone (and update) with various substitutions:

  $ hg clone -q main main2
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls -A main2
  .hg
  .hgsub
  .hgsubstate

  $ SUB=sub1 hg clone -q main main3
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls -A main3
  .hg
  .hgsub
  .hgsubstate

  $ SUB=sub2 hg clone -q main main4
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls -A main4
  .hg
  .hgsub
  .hgsubstate

on clone empty subrepo into .hg, then pull (and update), which at least fails:

  $ SUB=.hg hg clone -qr0 main main5
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls -A main5
  .hg
  .hgsub
  .hgsubstate
  $ test -d main5/.hg/.hg
  [1]
  $ SUB=.hg hg -R main5 pull -u
  pulling from $TESTTMP/envvar/main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 7a2f0e59146f
  .hgsubstate: untracked file differs
  abort: untracked files in working directory differ from files in requested revision
  [255]
  $ cat main5/.hg/hgrc | grep pwned
  [1]

on clone (and update) into .hg, which at least fails:

  $ SUB=.hg hg clone -q main main6
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls -A main6
  .hg
  .hgsub
  .hgsubstate
  $ cat main6/.hg/hgrc | grep pwned
  [1]

on clone (and update) into .hg/* subdir:

  $ SUB=.hg/foo hg clone -q main main7
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls -A main7
  .hg
  .hgsub
  .hgsubstate
  $ test -d main7/.hg/.hg
  [1]

on clone (and update) into outer tree:

  $ SUB=../out-of-tree-write hg clone -q main main8
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls -A main8
  .hg
  .hgsub
  .hgsubstate

on clone (and update) into e.g. $HOME, which doesn't work since subrepo paths
are concatenated prior to variable expansion:

  $ SUB="$TESTTMP/envvar/fakehome" hg clone -q main main9
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls -A main9 | wc -l
  \s*3 (re)

  $ ls
  main
  main2
  main3
  main4
  main5
  main6
  main7
  main8
  main9
  $ cd ..

Test tilde
----------

The leading tilde may be expanded to $HOME, but it can be a valid subrepo
path in theory. However, we want to prohibit it as there might be unsafe
handling of such paths.

on commit:

  $ hg init tilde
  $ cd tilde
  $ hg init './~'
  $ echo '~ = ~' >> .hgsub
  $ hg ci -qAm 'add subrepo "~"'
  abort: subrepo path contains illegal component: ~
  [255]

prepare tampered repo (including the commit above):

  $ hg import --bypass -qm 'add subrepo "~"' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +~ = ~
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 ~
  > EOF
  $ cd ..

on clone (and update):

  $ hg clone -q tilde tilde2
  abort: subrepo path contains illegal component: ~
  [255]

Test direct symlink traversal
-----------------------------

#if symlink

on commit:

  $ mkdir hgsymdir
  $ hg init hgsymdir/root
  $ cd hgsymdir/root
  $ ln -s ../out
  $ hg ci -qAm 'add symlink "out"'
  $ hg init ../out
  $ echo 'out = out' >> .hgsub
  $ hg ci -qAm 'add subrepo "out"'
  abort: subrepo 'out' traverses symbolic link
  [255]

prepare tampered repo (including the commit above):

  $ hg import --bypass -qm 'add subrepo "out"' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +out = out
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 out
  > EOF
  $ cd ../..

on clone (and update):

  $ mkdir hgsymdir2
  $ hg clone -q hgsymdir/root hgsymdir2/root
  abort: subrepo 'out' traverses symbolic link
  [255]
  $ ls hgsymdir2
  root

#endif

Test indirect symlink traversal
-------------------------------

#if symlink

on commit:

  $ mkdir hgsymin
  $ hg init hgsymin/root
  $ cd hgsymin/root
  $ ln -s ../out
  $ hg ci -qAm 'add symlink "out"'
  $ mkdir ../out
  $ hg init ../out/sub
  $ echo 'out/sub = out/sub' >> .hgsub
  $ hg ci -qAm 'add subrepo "out/sub"'
  abort: path 'out/sub' traverses symbolic link 'out'
  [255]

prepare tampered repo (including the commit above):

  $ hg import --bypass -qm 'add subrepo "out/sub"' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +out/sub = out/sub
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 out/sub
  > EOF
  $ cd ../..

on clone (and update):

  $ mkdir hgsymin2
  $ hg clone -q hgsymin/root hgsymin2/root
  abort: path 'out/sub' traverses symbolic link 'out'
  [255]
  $ ls hgsymin2
  root

#endif

Test symlink traversal by variable expansion
--------------------------------------------

#if symlink

  $ FAKEHOME="$TESTTMP/envvarsym/fakehome"

on commit:

  $ mkdir envvarsym
  $ cd envvarsym
  $ hg init main
  $ cd main
  $ ln -s "`echo "$FAKEHOME" | sed 's|\(.\)/.*|\1|'`"
  $ hg ci -qAm 'add symlink to top-level system directory'

  $ hg init sub1
  $ echo pwned > sub1/pwned
  $ hg -R sub1 ci -qAm 'add sub1 files'
  $ hg -R sub1 log -r. -T '{node}\n'
  f40c9134ba1b6961e12f250868823f0092fb68a8
  $ echo '$SUB = sub1' >> .hgsub
  $ SUB="$FAKEHOME" hg ci -qAm 'add subrepo "$SUB"'
  abort: subrepo path contains illegal component: $SUB
  [255]

prepare tampered repo (including the changes above as two commits):

  $ hg import --bypass -qm 'add subrepo "$SUB"' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +$SUB = sub1
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 $SUB
  > EOF
  $ hg debugsetparents 1
  $ hg import --bypass -qm 'update subrepo "$SUB"' - <<'EOF'
  > diff --git a/.hgsubstate b/.hgsubstate
  > --- a/.hgsubstate
  > +++ b/.hgsubstate
  > @@ -1,1 +1,1 @@
  > -0000000000000000000000000000000000000000 $SUB
  > +f40c9134ba1b6961e12f250868823f0092fb68a8 $SUB
  > EOF
  $ cd ..

on clone (and update) without fakehome directory:

  $ rm -fR "$FAKEHOME"
  $ SUB="$FAKEHOME" hg clone -q main main2
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ test -d "$FAKEHOME"
  [1]

on clone (and update) with empty fakehome directory:

  $ rm -fR "$FAKEHOME"
  $ mkdir "$FAKEHOME"
  $ SUB="$FAKEHOME" hg clone -q main main3
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls "$FAKEHOME"

on clone (and update) with non-empty fakehome directory:

  $ rm -fR "$FAKEHOME"
  $ mkdir "$FAKEHOME"
  $ touch "$FAKEHOME/a"
  $ SUB="$FAKEHOME" hg clone -q main main4
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls "$FAKEHOME"
  a

on clone empty subrepo with non-empty fakehome directory,
then pull (and update):

  $ rm -fR "$FAKEHOME"
  $ mkdir "$FAKEHOME"
  $ touch "$FAKEHOME/a"
  $ SUB="$FAKEHOME" hg clone -qr1 main main5
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls "$FAKEHOME"
  a
  $ test -d "$FAKEHOME/.hg"
  [1]
  $ SUB="$FAKEHOME" hg -R main5 pull -u
  pulling from $TESTTMP/envvarsym/main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets * (glob)
  .hgsubstate: untracked file differs
  abort: untracked files in working directory differ from files in requested revision
  [255]
  $ ls "$FAKEHOME"
  a
  $ test -d "$FAKEHOME/.hg"
  [1]

on clone empty subrepo with hg-managed fakehome directory,
then pull (and update):

  $ rm -fR "$FAKEHOME"
  $ hg init "$FAKEHOME"
  $ touch "$FAKEHOME/a"
  $ hg -R "$FAKEHOME" ci -qAm 'add fakehome file'
  $ SUB="$FAKEHOME" hg clone -qr1 main main6
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls -A "$FAKEHOME"
  .hg
  a
  $ SUB="$FAKEHOME" hg -R main6 pull -u
  pulling from $TESTTMP/envvarsym/main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets * (glob)
  .hgsubstate: untracked file differs
  abort: untracked files in working directory differ from files in requested revision
  [255]
  $ ls -A "$FAKEHOME"
  .hg
  a

on clone only symlink with hg-managed fakehome directory,
then pull (and update):

  $ rm -fR "$FAKEHOME"
  $ hg init "$FAKEHOME"
  $ touch "$FAKEHOME/a"
  $ hg -R "$FAKEHOME" ci -qAm 'add fakehome file'
  $ SUB="$FAKEHOME" hg clone -qr0 main main7
  $ ls -A "$FAKEHOME"
  .hg
  a
  $ SUB="$FAKEHOME" hg -R main7 pull -uf
  pulling from $TESTTMP/envvarsym/main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 3 changes to 2 files
  new changesets * (glob)
  abort: subrepo path contains illegal component: $SUB
  [255]
  $ ls -A "$FAKEHOME"
  .hg
  a

  $ cd ..

#endif

Test drive letter
-----------------

Windows has a weird relative path that can change the drive letter, which
should also be prohibited on Windows.

prepare tampered repo:

  $ hg init driveletter
  $ cd driveletter
  $ hg import --bypass -qm 'add subrepo "X:"' - <<'EOF'
  > diff --git a/.hgsub b/.hgsub
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsub
  > @@ -0,0 +1,1 @@
  > +X: = foo
  > diff --git a/.hgsubstate b/.hgsubstate
  > new file mode 100644
  > --- /dev/null
  > +++ b/.hgsubstate
  > @@ -0,0 +1,1 @@
  > +0000000000000000000000000000000000000000 X:
  > EOF
  $ cd ..

on clone (and update):

#if windows

  $ hg clone -q driveletter driveletter2
  abort: path contains illegal component: X:
  [255]

#else

  $ hg clone -q driveletter driveletter2
  $ ls -A driveletter2
  .hg
  .hgsub
  .hgsubstate
  X:

#endif