Mercurial > hg-stable

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/contrib/docker/apache-server/Dockerfile	Tue Nov 11 20:32:10 2014 -0800
@@ -0,0 +1,23 @@
+FROM debian:wheezy
+
+ENV DEBIAN_FRONTEND noninteractive
+ENV WSGI_PROCESSES 4
+ENV WSGI_THREADS 1
+ENV WSGI_MAX_REQUESTS 100000
+
+EXPOSE 80
+VOLUME ["/var/hg/htdocs", "/var/hg/repos"]
+
+RUN apt-get update && apt-get -y install libapache2-mod-wsgi python-dev vim
+
+# Install our own Apache site.
+RUN a2dissite 000-default
+ADD vhost.conf /etc/apache2/sites-available/hg
+RUN a2ensite hg
+
+ADD hgwebconfig /defaulthgwebconfig
+
+ADD entrypoint.sh /entrypoint.sh
+ENTRYPOINT ["/entrypoint.sh"]
+
+CMD ["/usr/sbin/apache2", "-DFOREGROUND"]
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/contrib/docker/apache-server/README.rst	Tue Nov 11 20:32:10 2014 -0800
@@ -0,0 +1,144 @@
+====================
+Apache Docker Server
+====================
+
+This directory contains code for running a Mercurial hgweb server via
+mod_wsgi with the Apache HTTP Server inside a Docker container.
+
+.. important::
+
+   This container is intended for testing purposes only: it is
+   **not** meant to be suitable for production use.
+
+Building Image
+==============
+
+The first step is to build a Docker image containing Apache and mod_wsgi::
+
+  $ docker build -t hg-apache .
+
+.. important::
+
+   You should rebuild the image whenever the content of this directory
+   changes. Rebuilding after pulling or when you haven't run the container
+   in a while is typically a good idea.
+
+Running the Server
+==================
+
+To run the container, you'll execute something like::
+
+  $ docker run --rm -it -v `pwd`/../../..:/var/hg/source -p 8000:80 hg-apache
+
+If you aren't a Docker expert:
+
+* ``--rm`` will remove the container when it stops (so it doesn't clutter
+  your system)
+* ``-i`` will launch the container in interactive mode so stdin is attached
+* ``-t`` will allocate a pseudo TTY
+* ``-v src:dst`` will mount the host filesystem at ``src`` into ``dst``
+  in the container. In our example, we assume you are running from this
+  directory and use the source code a few directories up.
+* ``-p 8000:80`` will publish port ``80`` on the container to port ``8000``
+  on the host, allowing you to access the HTTP server on the host interface.
+* ``hg-apache`` is the container image to run. This should correspond to what
+  we build with ``docker build``.
+
+.. important::
+
+   The container **requires** that ``/var/hg/source`` contain the Mercurial
+   source code.
+
+   Upon start, the container will attempt an install of the source in that
+   directory. If the architecture of the host machine doesn't match that of
+   the Docker host (e.g. when running Boot2Docker under OS X), Mercurial's
+   Python C extensions will fail to run. Be sure to ``make clean`` your
+   host's source tree before mounting it in the container to avoid this.
+
+When starting the container, you should see some start-up actions (including
+a Mercurial install) and some output saying Apache has started::
+
+Now if you load ``http://localhost:8000/`` (or whatever interface Docker
+is using), you should see hgweb running!
+
+For your convenience, we've created an empty repository available at
+``/repo``. Feel free to populate it with ``hg push``.
+
+Customizing the Server
+======================
+
+By default, the Docker container installs a basic hgweb config and an
+empty dummy repository. It also uses some reasonable defaults for
+mod_wsgi.
+
+Customizing the WSGI Dispatcher And Mercurial Config
+----------------------------------------------------
+
+By default, the Docker environment installs a custom ``hgweb.wsgi``
+file (based on the example in ``contrib/hgweb.wsgi``). The file
+is installed into ``/var/hg/htdocs/hgweb.wsgi``.
+
+A default hgweb configuration file is also installed. The ``hgwebconfig``
+file from this directory is installed into ``/var/hg/htdocs/config``.
+
+You have a few options for customizing these files.
+
+The simplest is to hack up ``hgwebconfig`` and ``entrypoint.sh`` in
+this directory and to rebuild the Docker image. This has the downside
+that the Mercurial working copy is modified and you may accidentally
+commit unwanted changes.
+
+The next simplest is to copy this directory somewhere, make your changes,
+then rebuild the image. No working copy changes involved.
+
+The preferred solution is to mount a host file into the container and
+overwrite the built-in defaults.
+
+For example, say we create a custom hgweb config file in ``~/hgweb``. We
+can start the container like so to install our custom config file::
+
+  $ docker run -v ~/hgweb:/var/hg/htdocs/config ...
+
+You can do something similar to install a custom WSGI dispatcher::
+
+  $ docker run -v ~/hgweb.wsgi:/var/hg/htdocs/hgweb.wsgi ...
+
+Managing Repositories
+---------------------
+
+Repositories are served from ``/var/hg/repos`` by default. This directory
+is configured as a Docker volume. This means you can mount an existing
+data volume container in the container so repository data is persisted
+across container invocations. See
+https://docs.docker.com/userguide/dockervolumes/ for more.
+
+Alternatively, if you just want to perform lightweight repository
+manipulation, open a shell in the container::
+
+  $ docker exec -it <container> /bin/bash
+
+Then run ``hg init``, etc to manipulate the repositories in ``/var/hg/repos``.
+
+mod_wsgi Configuration Settings
+-------------------------------
+
+mod_wsgi settings can be controlled with the following environment
+variables.
+
+WSGI_PROCESSES
+   Number of WSGI processes to run.
+WSGI_THREADS
+   Number of threads to run in each WSGI process
+WSGI_MAX_REQUESTS
+   Maximum number of requests each WSGI process may serve before it is
+   reaped.
+
+See https://code.google.com/p/modwsgi/wiki/ConfigurationDirectives#WSGIDaemonProcess
+for more on these settings.
+
+.. note::
+
+   The default is to use 1 thread per process. The reason is that Mercurial
+   doesn't perform well in multi-threaded mode due to the GIL. Most people
+   run a single thread per process in production for this reason, so that's
+   what we default to.
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/contrib/docker/apache-server/entrypoint.sh	Tue Nov 11 20:32:10 2014 -0800
@@ -0,0 +1,80 @@
+#!/bin/bash
+
+# This script gets executed on container start. Its job is to set up
+# the Mercurial environment and invoke the server.
+
+# Mercurial can be started in two modes.
+# If the MERCURIAL_SOURCE environment variable is set and it points to a
+# Mercurial source directory, we will install Mercurial from that directory.
+# Otherwise, we download the Mercurial source and install it manually.
+
+set -e
+
+SOURCE_DIR=/var/hg/source
+INSTALL_DIR=/var/hg/install
+REPOS_DIR=/var/hg/repos
+HTDOCS_DIR=/var/hg/htdocs
+
+if [ ! -d ${SOURCE_DIR} ]; then
+  echo "Mercurial source not available at ${SOURCE_DIR}"
+  echo "You need to mount a volume containing the Mercurial source code"
+  echo "when running the container. For example:"
+  echo ""
+  echo "  $ docker run -v ~/src/hg:/${SOURCE_DIR} hg-apache"
+  echo ""
+  echo "This container will now stop running."
+  exit 1
+fi
+
+echo "Installing Mercurial from ${SOURCE_DIR} into ${INSTALL_DIR}"
+pushd ${SOURCE_DIR}
+/usr/bin/python2.7 setup.py install --root=/ --prefix=${INSTALL_DIR} --force
+popd
+
+mkdir -p ${HTDOCS_DIR}
+
+# Provide a default config if the user hasn't supplied one.
+if [ ! -f ${HTDOCS_DIR}/config ]; then
+  cp /defaulthgwebconfig ${HTDOCS_DIR}/config
+fi
+
+if [ ! -f ${HTDOCS_DIR}/hgweb.wsgi ]; then
+  cat >> ${HTDOCS_DIR}/hgweb.wsgi << EOF
+config = '${HTDOCS_DIR}/config'
+
+import sys
+sys.path.insert(0, '${INSTALL_DIR}/lib/python2.7/site-packages')
+
+from mercurial import demandimport
+demandimport.enable()
+
+from mercurial.hgweb import hgweb
+application = hgweb(config)
+EOF
+fi
+
+mkdir -p ${REPOS_DIR}
+
+if [ ! -d ${REPOS_DIR}/repo ]; then
+  ${INSTALL_DIR}/bin/hg init ${REPOS_DIR}/repo
+  chown -R www-data:www-data ${REPOS_DIR}/repo
+fi
+
+# This is necessary to make debuginstall happy.
+if [ ! -f ~/.hgrc ]; then
+  cat >> ~/.hgrc << EOF
+[ui]
+username = Dummy User <nobody@example.com>
+EOF
+fi
+
+echo "Verifying Mercurial installation looks happy"
+${INSTALL_DIR}/bin/hg debuginstall
+
+. /etc/apache2/envvars
+
+echo "Starting Apache HTTP Server on port 80"
+echo "We hope you remembered to publish this port when running the container!"
+echo "If this is an interactive container, simply CTRL^C to stop."
+
+exec "$@"
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/contrib/docker/apache-server/hgwebconfig	Tue Nov 11 20:32:10 2014 -0800
@@ -0,0 +1,6 @@
+[paths]
+/ = /var/hg/repos/*
+
+[web]
+allow_push = *
+push_ssl = False
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/contrib/docker/apache-server/vhost.conf	Tue Nov 11 20:32:10 2014 -0800
@@ -0,0 +1,24 @@
+# Apache won't be able to resolve its own hostname, so we sneak this
+# into the global context to silence a confusing-to-user warning on
+# server start.
+ServerName hg
+
+<VirtualHost *:80>
+  DocumentRoot /var/hg/htdocs
+  <Directory />
+    Options FollowSymLinks
+    AllowOverride None
+  </Directory>
+
+  SetEnv HGENCODING UTF-8
+  SetEnv LC_TYPE UTF-8
+
+  WSGIDaemonProcess hg processes=${WSGI_PROCESSES} threads=${WSGI_THREADS} maximum-requests=${WSGI_MAX_REQUESTS} user=www-data group=www-data display-name=hg-wsgi
+  WSGIProcessGroup hg
+
+  WSGIScriptAliasMatch ^(.*) /var/hg/htdocs/hgweb.wsgi$1
+
+  ErrorLog ${APACHE_LOG_DIR}/error.log
+  LogLevel warn
+  CustomLog ${APACHE_LOG_DIR}/access.log combined
+</VirtualHost>