annotate tests/test-ssh-proto.t @ 36968:2090044a288d

revbranchcache: advertise and use 'rbc' exchange capability

The feature is now advertised and use.

Updating the branchmap cache can be very expensive (up to minutes on large
repository) and fetching revision branch data is about 80% of that. Exchanging
the rev branch cache over the wire really help to recover from branch map
invalidation.

(There is a good chance other in flight chance would conflict on
test-http-bad-server.t and other. So here is a small note to help update that
test again: capabilities=19bytes, part-107bytes)

  $ cat > hgrc-sshv2 << EOF
  > %include $HGRCPATH
  > [experimental]
  > sshpeer.advertise-v2 = true
  > sshserver.support-v2 = true
  > EOF

Helper function to run protocol tests against multiple protocol versions.
This is easier than using #testcases because managing differences between
protocols with inline conditional output is hard to read.

  $ debugwireproto() {
  >   commands=`cat -`
  >   echo 'testing ssh1'
  >   echo "${commands}" | hg --verbose debugwireproto --localssh
  >   echo ""
  >   echo 'testing ssh2'
  >   echo "${commands}" | HGRCPATH=$TESTTMP/hgrc-sshv2 hg --verbose debugwireproto --localssh
  > }

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ssh = $PYTHON "$TESTDIR/dummyssh"
  > [devel]
  > debug.peer-request = true
  > [extensions]
  > sshprotoext = $TESTDIR/sshprotoext.py
  > EOF

  $ hg init server
  $ cd server
  $ echo 0 > foo
  $ hg -q add foo
  $ hg commit -m initial

A no-op connection performs a handshake

  $ hg debugwireproto --localssh << EOF
  > EOF
  creating ssh peer from handshake results

Raw peers don't perform any activity

  $ hg debugwireproto --localssh --peer raw << EOF
  > EOF
  using raw connection to peer
  $ hg debugwireproto --localssh --peer ssh1 << EOF
  > EOF
  creating ssh peer for wire protocol version 1
  $ hg debugwireproto --localssh --peer ssh2 << EOF
  > EOF
  creating ssh peer for wire protocol version 2

Test a normal behaving server, for sanity

  $ cd ..

  $ hg --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  devel-peer-request: hello
  sending hello command
  devel-peer-request: between
  devel-peer-request:   pairs: 81 bytes
  sending between command
  remote: 403
  remote: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  remote: 1
  url: ssh://user@dummy/server
  local: no
  pushable: yes

Server should answer the "hello" command in isolation

  $ hg -R server debugwireproto --localssh --peer raw << EOF
  > raw
  >     hello\n
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n

`hg debugserve --sshstdio` works

  $ cd server
  $ hg debugserve --sshstdio << EOF
  > hello
  > EOF
  403
  capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN

I/O logging works

  $ hg debugserve --sshstdio --logiofd 1 << EOF
  > hello
  > EOF
  o> write(4) -> 4:
  o>     403\n
  o> write(403) -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  403
  capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> flush() -> None

  $ hg debugserve --sshstdio --logiofile $TESTTMP/io << EOF
  > hello
  > EOF
  403
  capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN

  $ cat $TESTTMP/io
  o> write(4) -> 4:
  o>     403\n
  o> write(403) -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> flush() -> None

  $ cd ..

>=0.9.1 clients send a "hello" + "between" for the null range as part of handshake.
Server should reply with capabilities and should send "1\n\n" as a successful
reply with empty response to the "between".

  $ hg -R server debugwireproto --localssh --peer raw << EOF
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

SSH banner is not printed by default, ignored by clients

  $ SSHSERVERMODE=banner hg debugpeer ssh://user@dummy/server
  url: ssh://user@dummy/server
  local: no
  pushable: yes

--debug will print the banner

  $ SSHSERVERMODE=banner hg --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  devel-peer-request: hello
  sending hello command
  devel-peer-request: between
  devel-peer-request:   pairs: 81 bytes
  sending between command
  remote: banner: line 0
  remote: banner: line 1
  remote: banner: line 2
  remote: banner: line 3
  remote: banner: line 4
  remote: banner: line 5
  remote: banner: line 6
  remote: banner: line 7
  remote: banner: line 8
  remote: banner: line 9
  remote: 403
  remote: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  remote: 1
  url: ssh://user@dummy/server
  local: no
  pushable: yes

And test the banner with the raw protocol

  $ SSHSERVERMODE=banner hg -R server debugwireproto --localssh --peer raw << EOF
  > raw
  >     hello\n
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 15:
  o>     banner: line 0\n
  o> readline() -> 15:
  o>     banner: line 1\n
  o> readline() -> 15:
  o>     banner: line 2\n
  o> readline() -> 15:
  o>     banner: line 3\n
  o> readline() -> 15:
  o>     banner: line 4\n
  o> readline() -> 15:
  o>     banner: line 5\n
  o> readline() -> 15:
  o>     banner: line 6\n
  o> readline() -> 15:
  o>     banner: line 7\n
  o> readline() -> 15:
  o>     banner: line 8\n
  o> readline() -> 15:
  o>     banner: line 9\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

Connecting to a <0.9.1 server that doesn't support the hello command.
The client should refuse, as we dropped support for connecting to such
servers.

  $ SSHSERVERMODE=no-hello hg --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  devel-peer-request: hello
  sending hello command
  devel-peer-request: between
  devel-peer-request:   pairs: 81 bytes
  sending between command
  remote: 0
  remote: 1
  abort: no suitable response from remote hg!
  [255]

Sending an unknown command to the server results in an empty response to that command

  $ hg -R server debugwireproto --localssh --peer raw << EOF
  > raw
  >     pre-hello\n
  > readline
  > raw
  >     hello\n
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(10) -> 10:
  i>     pre-hello\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n

  $ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-no-args --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  sending no-args command
  devel-peer-request: hello
  sending hello command
  devel-peer-request: between
  devel-peer-request:   pairs: 81 bytes
  sending between command
  remote: 0
  remote: 403
  remote: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  remote: 1
  url: ssh://user@dummy/server
  local: no
  pushable: yes

Send multiple unknown commands before hello

  $ hg -R server debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown1\n
  > readline
  > raw
  >     unknown2\n
  > readline
  > raw
  >     unknown3\n
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(9) -> 9:
  i>     unknown1\n
  o> readline() -> 2:
  o>     0\n
  i> write(9) -> 9:
  i>     unknown2\n
  o> readline() -> 2:
  o>     0\n
  i> write(9) -> 9:
  i>     unknown3\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

  $ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-multiple-no-args --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  sending unknown1 command
  sending unknown2 command
  sending unknown3 command
  devel-peer-request: hello
  sending hello command
  devel-peer-request: between
  devel-peer-request:   pairs: 81 bytes
  sending between command
  remote: 0
  remote: 0
  remote: 0
  remote: 403
  remote: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  remote: 1
  url: ssh://user@dummy/server
  local: no
  pushable: yes

Send an unknown command before hello that has arguments

  $ cd server

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     with-args\n
  >     foo 13\n
  >     value for foo\n
  >     bar 13\n
  >     value for bar\n
  > readline
  > readline
  > readline
  > readline
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(52) -> 52:
  i>     with-args\n
  i>     foo 13\n
  i>     value for foo\n
  i>     bar 13\n
  i>     value for bar\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

Send an unknown command having an argument that looks numeric

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown\n
  >     foo 1\n
  >     0\n
  > readline
  > readline
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(16) -> 16:
  i>     unknown\n
  i>     foo 1\n
  i>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown\n
  >     foo 1\n
  >     1\n
  > readline
  > readline
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(16) -> 16:
  i>     unknown\n
  i>     foo 1\n
  i>     1\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

When sending a dict argument value, it is serialized to
"<arg> <item count>" followed by "<key> <len>\n<value>" for each item
in the dict.

Dictionary value for unknown command

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown\n
  >     dict 3\n
  >     key1 3\n
  >     foo\n
  >     key2 3\n
  >     bar\n
  >     key3 3\n
  >     baz\n
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(48) -> 48:
  i>     unknown\n
  i>     dict 3\n
  i>     key1 3\n
  i>     foo\n
  i>     key2 3\n
  i>     bar\n
  i>     key3 3\n
  i>     baz\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n

Incomplete dictionary send

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown\n
  >     dict 3\n
  >     key1 3\n
  >     foo\n
  > readline
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(26) -> 26:
  i>     unknown\n
  i>     dict 3\n
  i>     key1 3\n
  i>     foo\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n

Incomplete value send

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown\n
  >     dict 3\n
  >     key1 3\n
  >     fo
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(24) -> 24:
  i>     unknown\n
  i>     dict 3\n
  i>     key1 3\n
  i>     fo
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n

Send a command line with spaces

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown withspace\n
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(18) -> 18:
  i>     unknown withspace\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown with multiple spaces\n
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > EOF
  using raw connection to peer
  i> write(29) -> 29:
  i>     unknown with multiple spaces\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     unknown with spaces\n
  >     key 10\n
  >     some value\n
  > readline
  > readline
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(38) -> 38:
  i>     unknown with spaces\n
  i>     key 10\n
  i>     some value\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
Send an unknown command after the "between"

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(105) -> 105:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

And one with arguments

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     hello\n
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > readline
  > raw
  >     unknown\n
  >     foo 5\n
  >     \nvalue\n
  >     bar 3\n
  >     baz\n
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  i> write(31) -> 31:
  i>     unknown\n
  i>     foo 5\n
  i>     \n
  i>     value\n
  i>     bar 3\n
  i>     baz\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 2:
  o>     0\n
  o> readline() -> 0: 

Send a valid command before the handshake

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     heads\n
  > readline
  > raw
  >     hello\n
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     heads\n
  o> readline() -> 3:
  o>     41\n
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 41:
  o>     68986213bd4485ea51533535e3fc9e78007a711f\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n

And a variation that doesn't send the between command

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     heads\n
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(6) -> 6:
  i>     heads\n
  o> readline() -> 3:
  o>     41\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 41:
  o>     68986213bd4485ea51533535e3fc9e78007a711f\n
  o> readline() -> 4:
  o>     403\n

Send an upgrade request to a server that doesn't support that command

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade 2e82ab3f-9ce3-4b4e-8f8c-6fd1c0e9e23a proto=irrelevant1%2Cirrelevant2\n
  > readline
  > raw
  >     hello\n
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(77) -> 77:
  i>     upgrade 2e82ab3f-9ce3-4b4e-8f8c-6fd1c0e9e23a proto=irrelevant1%2Cirrelevant2\n
  o> readline() -> 2:
  o>     0\n
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

  $ cd ..

  $ hg --config experimental.sshpeer.advertise-v2=true --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  sending upgrade request: * proto=exp-ssh-v2-0001 (glob)
  devel-peer-request: hello
  sending hello command
  devel-peer-request: between
  devel-peer-request:   pairs: 81 bytes
  sending between command
  remote: 0
  remote: 403
  remote: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  remote: 1
  url: ssh://user@dummy/server
  local: no
  pushable: yes

Enable version 2 support on server. We need to do this in hgrc because we can't
use --config with `hg serve --stdio`.

  $ cat >> server/.hg/hgrc << EOF
  > [experimental]
  > sshserver.support-v2 = true
  > EOF

Send an upgrade request to a server that supports upgrade

  $ cd server

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade this-is-some-token proto=exp-ssh-v2-0001\n
  >     hello\n
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(153) -> 153:
  i>     upgrade this-is-some-token proto=exp-ssh-v2-0001\n
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 44:
  o>     upgraded this-is-some-token exp-ssh-v2-0001\n
  o> readline() -> 4:
  o>     402\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n

  $ cd ..

  $ hg --config experimental.sshpeer.advertise-v2=true --debug debugpeer ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  sending upgrade request: * proto=exp-ssh-v2-0001 (glob)
  devel-peer-request: hello
  sending hello command
  devel-peer-request: between
  devel-peer-request:   pairs: 81 bytes
  sending between command
  protocol upgraded to exp-ssh-v2-0001
  remote: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  url: ssh://user@dummy/server
  local: no
  pushable: yes

Verify the peer has capabilities

  $ hg --config experimental.sshpeer.advertise-v2=true --debug debugcapabilities ssh://user@dummy/server
  running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
  running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
  sending upgrade request: * proto=exp-ssh-v2-0001 (glob)
  devel-peer-request: hello
  sending hello command
  devel-peer-request: between
  devel-peer-request:   pairs: 81 bytes
  sending between command
  protocol upgraded to exp-ssh-v2-0001
  remote: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  Main capabilities:
    batch
    branchmap
    $USUAL_BUNDLE2_CAPS_SERVER$
    changegroupsubset
    getbundle
    known
    lookup
    pushkey
    streamreqs=generaldelta,revlogv1
    unbundle=HG10GZ,HG10BZ,HG10UN
    unbundlehash
  Bundle2 capabilities:
    HG20
    bookmarks
    changegroup
      01
      02
    digests
      md5
      sha1
      sha512
    error
      abort
      unsupportedcontent
      pushraced
      pushkey
    hgtagsfnodes
    listkeys
    phases
      heads
    pushkey
    remote-changegroup
      http
      https
    rev-branch-cache

Command after upgrade to version 2 is processed

  $ cd server

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >      upgrade this-is-some-token proto=exp-ssh-v2-0001\n
  >      hello\n
  >      between\n
  >      pairs 81\n
  >      0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > raw
  >      hello\n
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(153) -> 153:
  i>     upgrade this-is-some-token proto=exp-ssh-v2-0001\n
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 44:
  o>     upgraded this-is-some-token exp-ssh-v2-0001\n
  o> readline() -> 4:
  o>     402\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     385\n
  o> readline() -> 385:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n

Multiple upgrades is not allowed

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade this-is-some-token proto=exp-ssh-v2-0001\n
  >     hello\n
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > readline
  > raw
  >     upgrade another-token proto=irrelevant\n
  >     hello\n
  > readline
  > readavailable
  > EOF
  using raw connection to peer
  i> write(153) -> 153:
  i>     upgrade this-is-some-token proto=exp-ssh-v2-0001\n
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 44:
  o>     upgraded this-is-some-token exp-ssh-v2-0001\n
  o> readline() -> 4:
  o>     402\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(45) -> 45:
  i>     upgrade another-token proto=irrelevant\n
  i>     hello\n
  o> readline() -> 1:
  o>     \n
  o> read(-1) -> 0: 
  e> read(-1) -> 42:
  e>     cannot upgrade protocols multiple times\n
  e>     -\n

Malformed upgrade request line (not exactly 3 space delimited tokens)

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade\n
  > readline
  > EOF
  using raw connection to peer
  i> write(8) -> 8:
  i>     upgrade\n
  o> readline() -> 2:
  o>     0\n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade token\n
  > readline
  > EOF
  using raw connection to peer
  i> write(14) -> 14:
  i>     upgrade token\n
  o> readline() -> 2:
  o>     0\n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade token foo=bar extra-token\n
  > readline
  > EOF
  using raw connection to peer
  i> write(34) -> 34:
  i>     upgrade token foo=bar extra-token\n
  o> readline() -> 2:
  o>     0\n

Upgrade request to unsupported protocol is ignored

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade this-is-some-token proto=unknown1,unknown2\n
  > readline
  > raw
  >     hello\n
  > readline
  > readline
  > raw
  >     between\n
  >     pairs 81\n
  >     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  > readline
  > readline
  > EOF
  using raw connection to peer
  i> write(51) -> 51:
  i>     upgrade this-is-some-token proto=unknown1,unknown2\n
  o> readline() -> 2:
  o>     0\n
  i> write(6) -> 6:
  i>     hello\n
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  i> write(98) -> 98:
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n

Upgrade request must be followed by hello + between

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade token proto=exp-ssh-v2-0001\n
  >     invalid\n
  > readline
  > readavailable
  > EOF
  using raw connection to peer
  i> write(44) -> 44:
  i>     upgrade token proto=exp-ssh-v2-0001\n
  i>     invalid\n
  o> readline() -> 1:
  o>     \n
  o> read(-1) -> 0: 
  e> read(-1) -> 46:
  e>     malformed handshake protocol: missing hello\n
  e>     -\n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade token proto=exp-ssh-v2-0001\n
  >     hello\n
  >     invalid\n
  > readline
  > readavailable
  > EOF
  using raw connection to peer
  i> write(50) -> 50:
  i>     upgrade token proto=exp-ssh-v2-0001\n
  i>     hello\n
  i>     invalid\n
  o> readline() -> 1:
  o>     \n
  o> read(-1) -> 0: 
  e> read(-1) -> 48:
  e>     malformed handshake protocol: missing between\n
  e>     -\n

  $ hg debugwireproto --localssh --peer raw << EOF
  > raw
  >     upgrade token proto=exp-ssh-v2-0001\n
  >     hello\n
  >     between\n
  >     invalid\n
  > readline
  > readavailable
  > EOF
  using raw connection to peer
  i> write(58) -> 58:
  i>     upgrade token proto=exp-ssh-v2-0001\n
  i>     hello\n
  i>     between\n
  i>     invalid\n
  o> readline() -> 1:
  o>     \n
  o> read(-1) -> 0: 
  e> read(-1) -> 49:
  e>     malformed handshake protocol: missing pairs 81\n
  e>     -\n

Legacy commands are not exposed to version 2 of protocol

  $ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
  > command branches
  >     nodes 0000000000000000000000000000000000000000
  > EOF
  creating ssh peer from handshake results
  sending branches command
  response: 

  $ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
  > command changegroup
  >     roots 0000000000000000000000000000000000000000
  > EOF
  creating ssh peer from handshake results
  sending changegroup command
  response: 

  $ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
  > command changegroupsubset
  >     bases 0000000000000000000000000000000000000000
  >     heads 0000000000000000000000000000000000000000
  > EOF
  creating ssh peer from handshake results
  sending changegroupsubset command
  response: 

  $ cd ..

Test listkeys for listing namespaces

  $ hg init empty
  $ cd empty
  $ debugwireproto << EOF
  > command listkeys
  >     namespace namespaces
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(13) -> 13:
  i>     namespace 10\n
  i> write(10) -> 10: namespaces
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     30\n
  o> bufferedread(30) -> 30:
  o>     bookmarks	\n
  o>     namespaces	\n
  o>     phases	
  response: bookmarks	\nnamespaces	\nphases	
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(13) -> 13:
  i>     namespace 10\n
  i> write(10) -> 10: namespaces
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     30\n
  o> bufferedread(30) -> 30:
  o>     bookmarks	\n
  o>     namespaces	\n
  o>     phases	
  response: bookmarks	\nnamespaces	\nphases	

  $ cd ..

Test listkeys for bookmarks

  $ hg init bookmarkrepo
  $ cd bookmarkrepo
  $ echo 0 > foo
  $ hg add foo
  $ hg -q commit -m initial
  $ echo 1 > foo
  $ hg commit -m second

With no bookmarks set

  $ debugwireproto << EOF
  > command listkeys
  >     namespace bookmarks
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     0\n
  response: 
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     0\n
  response: 

With a single bookmark set

  $ hg book -r 0 bookA
  $ debugwireproto << EOF
  > command listkeys
  >     namespace bookmarks
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     46\n
  o> bufferedread(46) -> 46: bookA	68986213bd4485ea51533535e3fc9e78007a711f
  response: bookA	68986213bd4485ea51533535e3fc9e78007a711f
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     46\n
  o> bufferedread(46) -> 46: bookA	68986213bd4485ea51533535e3fc9e78007a711f
  response: bookA	68986213bd4485ea51533535e3fc9e78007a711f

With multiple bookmarks set

  $ hg book -r 1 bookB
  $ debugwireproto << EOF
  > command listkeys
  >     namespace bookmarks
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     93\n
  o> bufferedread(93) -> 93:
  o>     bookA	68986213bd4485ea51533535e3fc9e78007a711f\n
  o>     bookB	1880f3755e2e52e3199e0ee5638128b08642f34d
  response: bookA	68986213bd4485ea51533535e3fc9e78007a711f\nbookB	1880f3755e2e52e3199e0ee5638128b08642f34d
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     93\n
  o> bufferedread(93) -> 93:
  o>     bookA	68986213bd4485ea51533535e3fc9e78007a711f\n
  o>     bookB	1880f3755e2e52e3199e0ee5638128b08642f34d
  response: bookA	68986213bd4485ea51533535e3fc9e78007a711f\nbookB	1880f3755e2e52e3199e0ee5638128b08642f34d

Test pushkey for bookmarks

  $ debugwireproto << EOF
  > command pushkey
  >     namespace bookmarks
  >     key remote
  >     old
  >     new 68986213bd4485ea51533535e3fc9e78007a711f
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending pushkey command
  i> write(8) -> 8:
  i>     pushkey\n
  i> write(6) -> 6:
  i>     key 6\n
  i> write(6) -> 6: remote
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> write(7) -> 7:
  i>     new 40\n
  i> write(40) -> 40: 68986213bd4485ea51533535e3fc9e78007a711f
  i> write(6) -> 6:
  i>     old 0\n
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     2\n
  o> bufferedread(2) -> 2:
  o>     1\n
  response: 1\n
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending pushkey command
  i> write(8) -> 8:
  i>     pushkey\n
  i> write(6) -> 6:
  i>     key 6\n
  i> write(6) -> 6: remote
  i> write(12) -> 12:
  i>     namespace 9\n
  i> write(9) -> 9: bookmarks
  i> write(7) -> 7:
  i>     new 40\n
  i> write(40) -> 40: 68986213bd4485ea51533535e3fc9e78007a711f
  i> write(6) -> 6:
  i>     old 0\n
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     2\n
  o> bufferedread(2) -> 2:
  o>     1\n
  response: 1\n

  $ hg bookmarks
     bookA                     0:68986213bd44
     bookB                     1:1880f3755e2e
     remote                    0:68986213bd44

  $ cd ..

Test listkeys for phases

  $ hg init phasesrepo
  $ cd phasesrepo

Phases on empty repo

  $ debugwireproto << EOF
  > command listkeys
  >     namespace phases
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     15\n
  o> bufferedread(15) -> 15: publishing	True
  response: publishing	True
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     15\n
  o> bufferedread(15) -> 15: publishing	True
  response: publishing	True

Create some commits

  $ echo 0 > foo
  $ hg add foo
  $ hg -q commit -m initial
  $ hg phase --public
  $ echo 1 > foo
  $ hg commit -m 'head 1 commit 1'
  $ echo 2 > foo
  $ hg commit -m 'head 1 commit 2'
  $ hg -q up 0
  $ echo 1a > foo
  $ hg commit -m 'head 2 commit 1'
  created new head
  $ echo 2a > foo
  $ hg commit -m 'head 2 commit 2'

Two draft heads

  $ debugwireproto << EOF
  > command listkeys
  >     namespace phases
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 4:
  o>     101\n
  o> bufferedread(101) -> 101:
  o>     20b8a89289d80036e6c4e87c2083e3bea1586637	1\n
  o>     c4750011d906c18ea2f0527419cbc1a544435150	1\n
  o>     publishing	True
  response: 20b8a89289d80036e6c4e87c2083e3bea1586637	1\nc4750011d906c18ea2f0527419cbc1a544435150	1\npublishing	True
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 4:
  o>     101\n
  o> bufferedread(101) -> 101:
  o>     20b8a89289d80036e6c4e87c2083e3bea1586637	1\n
  o>     c4750011d906c18ea2f0527419cbc1a544435150	1\n
  o>     publishing	True
  response: 20b8a89289d80036e6c4e87c2083e3bea1586637	1\nc4750011d906c18ea2f0527419cbc1a544435150	1\npublishing	True

Single draft head

  $ hg phase --public -r 2
  $ debugwireproto << EOF
  > command listkeys
  >     namespace phases
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     58\n
  o> bufferedread(58) -> 58:
  o>     c4750011d906c18ea2f0527419cbc1a544435150	1\n
  o>     publishing	True
  response: c4750011d906c18ea2f0527419cbc1a544435150	1\npublishing	True
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     58\n
  o> bufferedread(58) -> 58:
  o>     c4750011d906c18ea2f0527419cbc1a544435150	1\n
  o>     publishing	True
  response: c4750011d906c18ea2f0527419cbc1a544435150	1\npublishing	True

All public heads

  $ hg phase --public -r 4
  $ debugwireproto << EOF
  > command listkeys
  >     namespace phases
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     15\n
  o> bufferedread(15) -> 15: publishing	True
  response: publishing	True
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending listkeys command
  i> write(9) -> 9:
  i>     listkeys\n
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> flush() -> None
  o> bufferedreadline() -> 3:
  o>     15\n
  o> bufferedread(15) -> 15: publishing	True
  response: publishing	True

Setting public phase via pushkey

  $ hg phase --draft --force -r .

  $ debugwireproto << EOF
  > command pushkey
  >     namespace phases
  >     key 7127240a084fd9dc86fe8d1f98e26229161ec82b
  >     old 1
  >     new 0
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending pushkey command
  i> write(8) -> 8:
  i>     pushkey\n
  i> write(7) -> 7:
  i>     key 40\n
  i> write(40) -> 40: 7127240a084fd9dc86fe8d1f98e26229161ec82b
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> write(6) -> 6:
  i>     new 1\n
  i> write(1) -> 1: 0
  i> write(6) -> 6:
  i>     old 1\n
  i> write(1) -> 1: 1
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     2\n
  o> bufferedread(2) -> 2:
  o>     1\n
  response: 1\n
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending pushkey command
  i> write(8) -> 8:
  i>     pushkey\n
  i> write(7) -> 7:
  i>     key 40\n
  i> write(40) -> 40: 7127240a084fd9dc86fe8d1f98e26229161ec82b
  i> write(12) -> 12:
  i>     namespace 6\n
  i> write(6) -> 6: phases
  i> write(6) -> 6:
  i>     new 1\n
  i> write(1) -> 1: 0
  i> write(6) -> 6:
  i>     old 1\n
  i> write(1) -> 1: 1
  i> flush() -> None
  o> bufferedreadline() -> 2:
  o>     2\n
  o> bufferedread(2) -> 2:
  o>     1\n
  response: 1\n

  $ hg phase .
  4: public

  $ cd ..

Test batching of requests

  $ hg init batching
  $ cd batching
  $ echo 0 > foo
  $ hg add foo
  $ hg -q commit -m initial
  $ hg phase --public
  $ echo 1 > foo
  $ hg commit -m 'commit 1'
  $ hg -q up 0
  $ echo 2 > foo
  $ hg commit -m 'commit 2'
  created new head
  $ hg book -r 1 bookA
  $ hg book -r 2 bookB

  $ debugwireproto << EOF
  > batchbegin
  > command heads
  > command listkeys
  >     namespace bookmarks
  > command listkeys
  >     namespace phases
  > batchsubmit
  > EOF
  testing ssh1
  creating ssh peer from handshake results
  i> write(104) -> 104:
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 4:
  o>     403\n
  o> readline() -> 403:
  o>     capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN\n
  o> readline() -> 2:
  o>     1\n
  o> readline() -> 1:
  o>     \n
  sending batch with 3 sub-commands
  i> write(6) -> 6:
  i>     batch\n
  i> write(4) -> 4:
  i>     * 0\n
  i> write(8) -> 8:
  i>     cmds 61\n
  i> write(61) -> 61: heads ;listkeys namespace=bookmarks;listkeys namespace=phases
  i> flush() -> None
  o> bufferedreadline() -> 4:
  o>     278\n
  o> bufferedread(278) -> 278:
  o>     bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  o>     ;bookA	4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  o>     bookB	bfebe6bd38eebc6f8202e419c1171268987ea6a6;4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab	1\n
  o>     bfebe6bd38eebc6f8202e419c1171268987ea6a6	1\n
  o>     publishing	True
  response #0: bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  response #1: bookA	4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\nbookB	bfebe6bd38eebc6f8202e419c1171268987ea6a6
  response #2: 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab	1\nbfebe6bd38eebc6f8202e419c1171268987ea6a6	1\npublishing	True
  
  testing ssh2
  creating ssh peer from handshake results
  i> write(171) -> 171:
  i>     upgrade * proto=exp-ssh-v2-0001\n (glob)
  i>     hello\n
  i>     between\n
  i>     pairs 81\n
  i>     0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
  i> flush() -> None
  o> readline() -> 62:
  o>     upgraded * exp-ssh-v2-0001\n (glob)
  o> readline() -> 4:
  o>     402\n
  o> read(402) -> 402: capabilities: lookup branchmap pushkey known getbundle unbundlehash batch changegroupsubset streamreqs=generaldelta,revlogv1 $USUAL_BUNDLE2_CAPS_SERVER$ unbundle=HG10GZ,HG10BZ,HG10UN
  o> read(1) -> 1:
  o>     \n
  sending batch with 3 sub-commands
  i> write(6) -> 6:
  i>     batch\n
  i> write(4) -> 4:
  i>     * 0\n
  i> write(8) -> 8:
  i>     cmds 61\n
  i> write(61) -> 61: heads ;listkeys namespace=bookmarks;listkeys namespace=phases
  i> flush() -> None
  o> bufferedreadline() -> 4:
  o>     278\n
  o> bufferedread(278) -> 278:
  o>     bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  o>     ;bookA	4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  o>     bookB	bfebe6bd38eebc6f8202e419c1171268987ea6a6;4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab	1\n
  o>     bfebe6bd38eebc6f8202e419c1171268987ea6a6	1\n
  o>     publishing	True
  response #0: bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
  response #1: bookA	4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\nbookB	bfebe6bd38eebc6f8202e419c1171268987ea6a6
  response #2: 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab	1\nbfebe6bd38eebc6f8202e419c1171268987ea6a6	1\npublishing	True