tests/test-branches.t

revset: use localrepo revbranchcache for branch name filtering

Branch name filtering in revsets was expensive. For every rev it created a
changectx and called .branch() which retrieved the branch name from the
changelog.

Instead, use the revbranchcache.

The revbranchcache is used read-only. The revset implementation with generators
and callbacks makes it hard to figure out when we are done using/updating the
cache and could write it back. It would also be 'tricky' to lock the repo for
writing from within a revset execution. Finally, the branchmap update will
usually make sure that the cache is updated before any revset can be run.
The revbranchcache is used without any locking but is short-lived and used in a
tight loop where we can assume that the changelog doesn't change ... or where
it not is relevant to us if it does.

perfrevset 'branch(mobile)' on mozilla-central.
Before:
! wall 10.989637 comb 10.970000 user 10.940000 sys 0.030000 (best of 3)
After, no cache:
! wall 7.368656 comb 7.370000 user 7.360000 sys 0.010000 (best of 3)
After, with cache:
! wall 0.528098 comb 0.530000 user 0.530000 sys 0.000000 (best of 18)

The performance improvement even without cache come from being based on
branchinfo on the changelog instead of using ctx.branch().

Some tests are added to verify that the revbranchcache works and keep an eye on
when the cache files actually are updated.

  $ hg init a
  $ cd a
  $ echo 'root' >root
  $ hg add root
  $ hg commit -d '0 0' -m "Adding root node"

  $ echo 'a' >a
  $ hg add a
  $ hg branch a
  marked working directory as branch a
  (branches are permanent and global, did you want a bookmark?)
  $ hg commit -d '1 0' -m "Adding a branch"

  $ hg branch q
  marked working directory as branch q
  (branches are permanent and global, did you want a bookmark?)
  $ echo 'aa' >a
  $ hg branch -C
  reset working directory to branch a
  $ hg commit -d '2 0' -m "Adding to a branch"

  $ hg update -C 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo 'b' >b
  $ hg add b
  $ hg branch b
  marked working directory as branch b
  (branches are permanent and global, did you want a bookmark?)
  $ hg commit -d '2 0' -m "Adding b branch"

  $ echo 'bh1' >bh1
  $ hg add bh1
  $ hg commit -d '3 0' -m "Adding b branch head 1"

  $ hg update -C 2
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo 'bh2' >bh2
  $ hg add bh2
  $ hg commit -d '4 0' -m "Adding b branch head 2"

  $ echo 'c' >c
  $ hg add c
  $ hg branch c
  marked working directory as branch c
  (branches are permanent and global, did you want a bookmark?)
  $ hg commit -d '5 0' -m "Adding c branch"

reserved names

  $ hg branch tip
  abort: the name 'tip' is reserved
  [255]
  $ hg branch null
  abort: the name 'null' is reserved
  [255]
  $ hg branch .
  abort: the name '.' is reserved
  [255]

invalid characters

  $ hg branch 'foo:bar'
  abort: ':' cannot be used in a name
  [255]

  $ hg branch 'foo
  > bar'
  abort: '\n' cannot be used in a name
  [255]

trailing or leading spaces should be stripped before testing duplicates

  $ hg branch 'b '
  abort: a branch of the same name already exists
  (use 'hg update' to switch to it)
  [255]

  $ hg branch ' b'
  abort: a branch of the same name already exists
  (use 'hg update' to switch to it)
  [255]

verify update will accept invalid legacy branch names

  $ hg init test-invalid-branch-name
  $ cd test-invalid-branch-name
  $ hg pull -u "$TESTDIR"/bundles/test-invalid-branch-name.hg
  pulling from *test-invalid-branch-name.hg (glob)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 2 files
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg update '"colon:test"'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ..

  $ echo 'd' >d
  $ hg add d
  $ hg branch 'a branch name much longer than the default justification used by branches'
  marked working directory as branch a branch name much longer than the default justification used by branches
  (branches are permanent and global, did you want a bookmark?)
  $ hg commit -d '6 0' -m "Adding d branch"

  $ hg branches
  a branch name much longer than the default justification used by branches 7:10ff5895aa57
  b                              4:aee39cd168d0
  c                              6:589736a22561 (inactive)
  a                              5:d8cbc61dbaa6 (inactive)
  default                        0:19709c5a4e75 (inactive)

-------

  $ hg branches -a
  a branch name much longer than the default justification used by branches 7:10ff5895aa57
  b                              4:aee39cd168d0

--- Branch a

  $ hg log -b a
  changeset:   5:d8cbc61dbaa6
  branch:      a
  parent:      2:881fe2b92ad0
  user:        test
  date:        Thu Jan 01 00:00:04 1970 +0000
  summary:     Adding b branch head 2
  
  changeset:   2:881fe2b92ad0
  branch:      a
  user:        test
  date:        Thu Jan 01 00:00:02 1970 +0000
  summary:     Adding to a branch
  
  changeset:   1:dd6b440dd85a
  branch:      a
  user:        test
  date:        Thu Jan 01 00:00:01 1970 +0000
  summary:     Adding a branch
  

---- Branch b

  $ hg log -b b
  changeset:   4:aee39cd168d0
  branch:      b
  user:        test
  date:        Thu Jan 01 00:00:03 1970 +0000
  summary:     Adding b branch head 1
  
  changeset:   3:ac22033332d1
  branch:      b
  parent:      0:19709c5a4e75
  user:        test
  date:        Thu Jan 01 00:00:02 1970 +0000
  summary:     Adding b branch
  

---- going to test branch closing

  $ hg branches
  a branch name much longer than the default justification used by branches 7:10ff5895aa57
  b                              4:aee39cd168d0
  c                              6:589736a22561 (inactive)
  a                              5:d8cbc61dbaa6 (inactive)
  default                        0:19709c5a4e75 (inactive)
  $ hg up -C b
  2 files updated, 0 files merged, 4 files removed, 0 files unresolved
  $ echo 'xxx1' >> b
  $ hg commit -d '7 0' -m 'adding cset to branch b'
  $ hg up -C aee39cd168d0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo 'xxx2' >> b
  $ hg commit -d '8 0' -m 'adding head to branch b'
  created new head
  $ echo 'xxx3' >> b
  $ hg commit -d '9 0' -m 'adding another cset to branch b'
  $ hg branches
  b                             10:bfbe841b666e
  a branch name much longer than the default justification used by branches 7:10ff5895aa57
  c                              6:589736a22561 (inactive)
  a                              5:d8cbc61dbaa6 (inactive)
  default                        0:19709c5a4e75 (inactive)
  $ hg heads --closed
  changeset:   10:bfbe841b666e
  branch:      b
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:09 1970 +0000
  summary:     adding another cset to branch b
  
  changeset:   8:eebb944467c9
  branch:      b
  parent:      4:aee39cd168d0
  user:        test
  date:        Thu Jan 01 00:00:07 1970 +0000
  summary:     adding cset to branch b
  
  changeset:   7:10ff5895aa57
  branch:      a branch name much longer than the default justification used by branches
  user:        test
  date:        Thu Jan 01 00:00:06 1970 +0000
  summary:     Adding d branch
  
  changeset:   6:589736a22561
  branch:      c
  user:        test
  date:        Thu Jan 01 00:00:05 1970 +0000
  summary:     Adding c branch
  
  changeset:   5:d8cbc61dbaa6
  branch:      a
  parent:      2:881fe2b92ad0
  user:        test
  date:        Thu Jan 01 00:00:04 1970 +0000
  summary:     Adding b branch head 2
  
  changeset:   0:19709c5a4e75
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Adding root node
  
  $ hg heads
  changeset:   10:bfbe841b666e
  branch:      b
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:09 1970 +0000
  summary:     adding another cset to branch b
  
  changeset:   8:eebb944467c9
  branch:      b
  parent:      4:aee39cd168d0
  user:        test
  date:        Thu Jan 01 00:00:07 1970 +0000
  summary:     adding cset to branch b
  
  changeset:   7:10ff5895aa57
  branch:      a branch name much longer than the default justification used by branches
  user:        test
  date:        Thu Jan 01 00:00:06 1970 +0000
  summary:     Adding d branch
  
  changeset:   6:589736a22561
  branch:      c
  user:        test
  date:        Thu Jan 01 00:00:05 1970 +0000
  summary:     Adding c branch
  
  changeset:   5:d8cbc61dbaa6
  branch:      a
  parent:      2:881fe2b92ad0
  user:        test
  date:        Thu Jan 01 00:00:04 1970 +0000
  summary:     Adding b branch head 2
  
  changeset:   0:19709c5a4e75
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Adding root node
  
  $ hg commit -d '9 0' --close-branch -m 'prune bad branch'
  $ hg branches -a
  b                              8:eebb944467c9
  a branch name much longer than the default justification used by branches 7:10ff5895aa57
  $ hg up -C b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg commit -d '9 0' --close-branch -m 'close this part branch too'
  $ hg commit -d '9 0' --close-branch -m 're-closing this branch'
  abort: can only close branch heads
  [255]

  $ hg log -r tip --debug
  changeset:   12:e3d49c0575d8fc2cb1cd6859c747c14f5f6d499f
  branch:      b
  tag:         tip
  phase:       draft
  parent:      8:eebb944467c9fb9651ed232aeaf31b3c0a7fc6c1
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    8:6f9ed32d2b310e391a4f107d5f0f071df785bfee
  user:        test
  date:        Thu Jan 01 00:00:09 1970 +0000
  extra:       branch=b
  extra:       close=1
  description:
  close this part branch too
  
  
--- b branch should be inactive

  $ hg branches
  a branch name much longer than the default justification used by branches 7:10ff5895aa57
  c                              6:589736a22561 (inactive)
  a                              5:d8cbc61dbaa6 (inactive)
  default                        0:19709c5a4e75 (inactive)
  $ hg branches -c
  a branch name much longer than the default justification used by branches 7:10ff5895aa57
  b                             12:e3d49c0575d8 (closed)
  c                              6:589736a22561 (inactive)
  a                              5:d8cbc61dbaa6 (inactive)
  default                        0:19709c5a4e75 (inactive)
  $ hg branches -a
  a branch name much longer than the default justification used by branches 7:10ff5895aa57
  $ hg branches -q
  a branch name much longer than the default justification used by branches
  c
  a
  default
  $ hg heads b
  no open branch heads found on branches b
  [1]
  $ hg heads --closed b
  changeset:   12:e3d49c0575d8
  branch:      b
  tag:         tip
  parent:      8:eebb944467c9
  user:        test
  date:        Thu Jan 01 00:00:09 1970 +0000
  summary:     close this part branch too
  
  changeset:   11:d3f163457ebf
  branch:      b
  user:        test
  date:        Thu Jan 01 00:00:09 1970 +0000
  summary:     prune bad branch
  
  $ echo 'xxx4' >> b
  $ hg commit -d '9 0' -m 'reopen branch with a change'
  reopening closed branch head 12

--- branch b is back in action

  $ hg branches -a
  b                             13:e23b5505d1ad
  a branch name much longer than the default justification used by branches 7:10ff5895aa57

---- test heads listings

  $ hg heads
  changeset:   13:e23b5505d1ad
  branch:      b
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:09 1970 +0000
  summary:     reopen branch with a change
  
  changeset:   7:10ff5895aa57
  branch:      a branch name much longer than the default justification used by branches
  user:        test
  date:        Thu Jan 01 00:00:06 1970 +0000
  summary:     Adding d branch
  
  changeset:   6:589736a22561
  branch:      c
  user:        test
  date:        Thu Jan 01 00:00:05 1970 +0000
  summary:     Adding c branch
  
  changeset:   5:d8cbc61dbaa6
  branch:      a
  parent:      2:881fe2b92ad0
  user:        test
  date:        Thu Jan 01 00:00:04 1970 +0000
  summary:     Adding b branch head 2
  
  changeset:   0:19709c5a4e75
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Adding root node
  

branch default

  $ hg heads default
  changeset:   0:19709c5a4e75
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Adding root node
  

branch a

  $ hg heads a
  changeset:   5:d8cbc61dbaa6
  branch:      a
  parent:      2:881fe2b92ad0
  user:        test
  date:        Thu Jan 01 00:00:04 1970 +0000
  summary:     Adding b branch head 2
  
  $ hg heads --active a
  no open branch heads found on branches a
  [1]

branch b

  $ hg heads b
  changeset:   13:e23b5505d1ad
  branch:      b
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:09 1970 +0000
  summary:     reopen branch with a change
  
  $ hg heads --closed b
  changeset:   13:e23b5505d1ad
  branch:      b
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:09 1970 +0000
  summary:     reopen branch with a change
  
  changeset:   11:d3f163457ebf
  branch:      b
  user:        test
  date:        Thu Jan 01 00:00:09 1970 +0000
  summary:     prune bad branch
  
default branch colors:

  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > color =
  > [color]
  > mode = ansi
  > EOF

  $ hg up -C c
  3 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg commit -d '9 0' --close-branch -m 'reclosing this branch'
  $ hg up -C b
  2 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ hg branches --color=always
  \x1b[0;32mb\x1b[0m\x1b[0;33m                             13:e23b5505d1ad\x1b[0m (esc)
  \x1b[0;0ma branch name much longer than the default justification used by branches\x1b[0m\x1b[0;33m 7:10ff5895aa57\x1b[0m (esc)
  \x1b[0;0ma\x1b[0m\x1b[0;33m                              5:d8cbc61dbaa6\x1b[0m (inactive) (esc)
  \x1b[0;0mdefault\x1b[0m\x1b[0;33m                        0:19709c5a4e75\x1b[0m (inactive) (esc)

default closed branch color:

  $ hg branches --color=always --closed
  \x1b[0;32mb\x1b[0m\x1b[0;33m                             13:e23b5505d1ad\x1b[0m (esc)
  \x1b[0;0ma branch name much longer than the default justification used by branches\x1b[0m\x1b[0;33m 7:10ff5895aa57\x1b[0m (esc)
  \x1b[0;30;1mc\x1b[0m\x1b[0;33m                             14:f894c25619d3\x1b[0m (closed) (esc)
  \x1b[0;0ma\x1b[0m\x1b[0;33m                              5:d8cbc61dbaa6\x1b[0m (inactive) (esc)
  \x1b[0;0mdefault\x1b[0m\x1b[0;33m                        0:19709c5a4e75\x1b[0m (inactive) (esc)

  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > color =
  > [color]
  > branches.active = green
  > branches.closed = blue
  > branches.current = red
  > branches.inactive = magenta
  > log.changeset = cyan
  > EOF

custom branch colors:

  $ hg branches --color=always
  \x1b[0;31mb\x1b[0m\x1b[0;36m                             13:e23b5505d1ad\x1b[0m (esc)
  \x1b[0;32ma branch name much longer than the default justification used by branches\x1b[0m\x1b[0;36m 7:10ff5895aa57\x1b[0m (esc)
  \x1b[0;35ma\x1b[0m\x1b[0;36m                              5:d8cbc61dbaa6\x1b[0m (inactive) (esc)
  \x1b[0;35mdefault\x1b[0m\x1b[0;36m                        0:19709c5a4e75\x1b[0m (inactive) (esc)

custom closed branch color:

  $ hg branches --color=always --closed
  \x1b[0;31mb\x1b[0m\x1b[0;36m                             13:e23b5505d1ad\x1b[0m (esc)
  \x1b[0;32ma branch name much longer than the default justification used by branches\x1b[0m\x1b[0;36m 7:10ff5895aa57\x1b[0m (esc)
  \x1b[0;34mc\x1b[0m\x1b[0;36m                             14:f894c25619d3\x1b[0m (closed) (esc)
  \x1b[0;35ma\x1b[0m\x1b[0;36m                              5:d8cbc61dbaa6\x1b[0m (inactive) (esc)
  \x1b[0;35mdefault\x1b[0m\x1b[0;36m                        0:19709c5a4e75\x1b[0m (inactive) (esc)

template output:

  $ hg branches -Tjson --closed
  [
   {
    "active": true,
    "branch": "b",
    "closed": false,
    "current": true,
    "node": "e23b5505d1ad24aab6f84fd8c7cb8cd8e5e93be0",
    "rev": 13
   },
   {
    "active": true,
    "branch": "a branch name much longer than the default justification used by branches",
    "closed": false,
    "current": false,
    "node": "10ff5895aa5793bd378da574af8cec8ea408d831",
    "rev": 7
   },
   {
    "active": false,
    "branch": "c",
    "closed": true,
    "current": false,
    "node": "f894c25619d3f1484639d81be950e0a07bc6f1f6",
    "rev": 14
   },
   {
    "active": false,
    "branch": "a",
    "closed": false,
    "current": false,
    "node": "d8cbc61dbaa6dc817175d1e301eecb863f280832",
    "rev": 5
   },
   {
    "active": false,
    "branch": "default",
    "closed": false,
    "current": false,
    "node": "19709c5a4e75bf938f8e349aff97438539bb729e",
    "rev": 0
   }
  ]

revision branch name caching implementation

cache creation
  $ rm .hg/cache/rbc-revs-v1
  $ hg debugrevspec 'branch("re:a ")'
  7
  $ [ -f .hg/cache/rbc-revs-v1 ] || echo no file
  no file
recovery from invalid cache file
  $ echo > .hg/cache/rbc-revs-v1
  $ hg debugrevspec 'branch("re:a ")'
  7
cache update NOT fully written from revset
  $ "$TESTDIR/md5sum.py" .hg/cache/rbc-revs-v1
  68b329da9893e34099c7d8ad5cb9c940  .hg/cache/rbc-revs-v1
recovery from other corruption - extra trailing data
  $ echo >> .hg/cache/rbc-revs-v1
  $ hg debugrevspec 'branch("re:a ")'
  7
cache update NOT fully written from revset
  $ "$TESTDIR/md5sum.py" .hg/cache/rbc-revs-v1
  e1c06d85ae7b8b032bef47e42e4c08f9  .hg/cache/rbc-revs-v1
lazy update after commit
  $ hg tag tag
  $ "$TESTDIR/md5sum.py" .hg/cache/rbc-revs-v1
  d0c0166808ee0a1f0e8894915ad363b6  .hg/cache/rbc-revs-v1
  $ hg debugrevspec 'branch("re:a ")'
  7
  $ "$TESTDIR/md5sum.py" .hg/cache/rbc-revs-v1
  d0c0166808ee0a1f0e8894915ad363b6  .hg/cache/rbc-revs-v1
update after rollback - cache keeps stripped revs until written for other reasons
  $ hg up -qr '.^'
  $ hg rollback -qf
  $ "$TESTDIR/md5sum.py" .hg/cache/rbc-revs-v1
  d8c2acdc229bf942fde1dfdbe8f9d933  .hg/cache/rbc-revs-v1
  $ hg debugrevspec 'branch("re:a ")'
  7
  $ "$TESTDIR/md5sum.py" .hg/cache/rbc-revs-v1
  d8c2acdc229bf942fde1dfdbe8f9d933  .hg/cache/rbc-revs-v1
handle history mutations that doesn't change the tip node - this is a problem
with the cache invalidation scheme used by branchmap
  $ hg log -r tip+b -T'{rev}:{node|short} {branch}\n'
  14:f894c25619d3 c
  13:e23b5505d1ad b
  $ hg bundle -q --all bu.hg
  $ hg --config extensions.strip= strip --no-b -qr -1:
  $ hg up -q tip
  $ hg branch
  b
  $ hg branch -q hacked
  $ hg ci --amend -qm 'hacked'
  $ hg pull -q bu.hg -r f894c25619d3
  $ hg log -r tip+b -T'{rev}:{node|short} {branch}\n'
  14:f894c25619d3 c
  12:e3d49c0575d8 b
  $ hg debugrevspec 'branch("hacked")'
  13
  $ "$TESTDIR/md5sum.py" .hg/cache/rbc-revs-v1
  22424d7e106c894336d9d705b0241bc5  .hg/cache/rbc-revs-v1
cleanup, restore old state
  $ hg --config extensions.strip= strip --no-b -qr -2:
  $ hg pull -q bu.hg
  $ rm bu.hg
  $ hg up -qr tip
  $ hg log -r tip -T'{rev}:{node|short}\n'
  14:f894c25619d3
the cache file do not go back to the old state - it still contains the
now unused 'hacked' branch name)
  $ hg debugrevspec 'branch("re:a ")'
  7
  $ "$TESTDIR/md5sum.py" .hg/cache/rbc-revs-v1
  d8c2acdc229bf942fde1dfdbe8f9d933  .hg/cache/rbc-revs-v1
  $ cat .hg/cache/rbc-names-v1
  default\x00a\x00b\x00c\x00a branch name much longer than the default justification used by branches\x00hacked (no-eol) (esc)

  $ cd ..