annotate tests/test-mq-subrepo.t @ 20786:d666da075b91

mq: omit ".hgsubstate" from qnew/qrefresh target list for consistent node hash

Before this patch, even if specified file patterns and -I/-X options
cause listing ".hgsubstate" up in the target list, qnew/qrefresh put
".hgsubstate" into the target list individually and forcibly.

This changes how many times ".hgsubstate" appear in the target list
according to run-time conditions, and causes inconsistent node hash,
even though revision content is same, because node hash calculation
uses the specified target list directly (without duplication check or
so).

This patch always omits ".hgsubstate" from qnew/qrefresh target list
for consistent node hash.

This omitting doesn't miss including ".hgsubstate" changes, because:

  - "localrepository.commit()" puts ".hgsubstate" into the target list
    for "commitctx()" forcibly if needed

  - "mq.putsubstate2changes()" puts ".hgsubstate" into the target list
    for "patch.diff()" if it is not yet listed up

  $ echo "[ui]" >> $HGRCPATH
  $ echo "commitsubrepos = Yes" >> $HGRCPATH
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ echo "record=" >> $HGRCPATH
  $ echo "[diff]" >> $HGRCPATH
  $ echo "nodates=1" >> $HGRCPATH

  $ stdin=`pwd`/stdin.tmp

fn to create new repository w/dirty subrepo, and cd into it
  $ mkrepo() {
  >     hg init $1
  >     cd $1
  >     hg qinit
  > }

fn to create dirty subrepo
  $ mksubrepo() {
  >     hg init $1
  >     cd $1
  >     echo a > a
  >     hg add
  >     cd ..
  > }

  $ testadd() {
  >     cat - > "$stdin"
  >     mksubrepo sub
  >     echo sub = sub >> .hgsub
  >     hg add .hgsub
  >     echo % abort when adding .hgsub w/dirty subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo [$?]
  >     hg -R sub ci -m0sub
  >     echo % update substate when adding .hgsub w/clean updated subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     hg debugsub
  > }

  $ testmod() {
  >     cat - > "$stdin"
  >     mksubrepo sub2
  >     echo sub2 = sub2 >> .hgsub
  >     echo % abort when modifying .hgsub w/dirty subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo [$?]
  >     hg -R sub2 ci -m0sub2
  >     echo % update substate when modifying .hgsub w/clean updated subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     hg debugsub
  > }

  $ testrm1() {
  >     cat - > "$stdin"
  >     mksubrepo sub3
  >     echo sub3 = sub3 >> .hgsub
  >     hg ci -Aqmsub3
  >     $EXTRA
  >     echo b >> sub3/a
  >     hg rm .hgsub
  >     echo % update substate when removing .hgsub w/dirty subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo % debugsub should be empty
  >     hg debugsub
  > }

  $ testrm2() {
  >     cat - > "$stdin"
  >     mksubrepo sub4
  >     echo sub4 = sub4 >> .hgsub
  >     hg ci -Aqmsub4
  >     $EXTRA
  >     hg rm .hgsub
  >     echo % update substate when removing .hgsub w/clean updated subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo % debugsub should be empty
  >     hg debugsub
  > }


handle subrepos safely on qnew

  $ mkrepo repo-2499-qnew
  $ testadd qnew -X path:no-effect -m0 0.diff
  adding a
  % abort when adding .hgsub w/dirty subrepo
  A .hgsub
  A sub/a
  % qnew -X path:no-effect -m0 0.diff
  abort: uncommitted changes in subrepository sub
  [255]
  % update substate when adding .hgsub w/clean updated subrepo
  A .hgsub
  % qnew -X path:no-effect -m0 0.diff
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

  $ testmod qnew --cwd .. -R repo-2499-qnew -X path:no-effect -m1 1.diff
  adding a
  % abort when modifying .hgsub w/dirty subrepo
  M .hgsub
  A sub2/a
  % qnew --cwd .. -R repo-2499-qnew -X path:no-effect -m1 1.diff
  abort: uncommitted changes in subrepository sub2
  [255]
  % update substate when modifying .hgsub w/clean updated subrepo
  M .hgsub
  % qnew --cwd .. -R repo-2499-qnew -X path:no-effect -m1 1.diff
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  path sub2
   source   sub2
   revision 1f94c7611cc6b74f5a17b16121a1170d44776845

  $ hg qpop -qa
  patch queue now empty
  $ testrm1 qnew -m2 2.diff
  adding a
  % update substate when removing .hgsub w/dirty subrepo
  M sub3/a
  R .hgsub
  % qnew -m2 2.diff
  % debugsub should be empty

  $ hg qpop -qa
  patch queue now empty
  $ testrm2 qnew -m3 3.diff
  adding a
  % update substate when removing .hgsub w/clean updated subrepo
  R .hgsub
  % qnew -m3 3.diff
  % debugsub should be empty

  $ cd ..


handle subrepos safely on qrefresh

  $ mkrepo repo-2499-qrefresh
  $ hg qnew -m0 0.diff
  $ testadd qrefresh
  adding a
  % abort when adding .hgsub w/dirty subrepo
  A .hgsub
  A sub/a
  % qrefresh
  abort: uncommitted changes in subrepository sub
  [255]
  % update substate when adding .hgsub w/clean updated subrepo
  A .hgsub
  % qrefresh
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

  $ hg qnew -m1 1.diff
  $ testmod qrefresh
  adding a
  % abort when modifying .hgsub w/dirty subrepo
  M .hgsub
  A sub2/a
  % qrefresh
  abort: uncommitted changes in subrepository sub2
  [255]
  % update substate when modifying .hgsub w/clean updated subrepo
  M .hgsub
  % qrefresh
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  path sub2
   source   sub2
   revision 1f94c7611cc6b74f5a17b16121a1170d44776845

  $ hg qpop -qa
  patch queue now empty
  $ EXTRA='hg qnew -m2 2.diff'
  $ testrm1 qrefresh
  adding a
  % update substate when removing .hgsub w/dirty subrepo
  M sub3/a
  R .hgsub
  % qrefresh
  % debugsub should be empty

  $ hg qpop -qa
  patch queue now empty
  $ EXTRA='hg qnew -m3 3.diff'
  $ testrm2 qrefresh
  adding a
  % update substate when removing .hgsub w/clean updated subrepo
  R .hgsub
  % qrefresh
  % debugsub should be empty
  $ EXTRA=

  $ cd ..


handle subrepos safely on qpush/qpop
(and we cannot qpop / qpush with a modified subrepo)

  $ mkrepo repo-2499-qpush
  $ mksubrepo sub
  adding a
  $ hg -R sub ci -m0sub
  $ echo sub = sub > .hgsub
  $ hg add .hgsub
  $ hg commit -m0
  $ hg debugsub
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  $ echo foo > ./sub/a
  $ hg -R sub commit -m foo
  $ hg commit -m1
  $ hg qimport -r "0:tip"
  $ hg -R sub id --id
  aa037b301eba

qpop
  $ hg -R sub update 0000
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg qpop
  abort: local changed subrepos found, refresh first
  [255]
  $ hg revert sub
  reverting subrepo sub
  adding sub/a
  $ hg qpop
  popping 1.diff
  now at: 0.diff
  $ hg status -AS
  C .hgsub
  C .hgsubstate
  C sub/a
  $ hg -R sub id --id
  b2fdb12cd82b

qpush
  $ hg -R sub update 0000
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg qpush
  abort: local changed subrepos found, refresh first
  [255]
  $ hg revert sub
  reverting subrepo sub
  adding sub/a
  $ hg qpush
  applying 1.diff
   subrepository sub diverged (local revision: b2fdb12cd82b, remote revision: aa037b301eba)
  (M)erge, keep (l)ocal or keep (r)emote? m
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  now at: 1.diff
  $ hg status -AS
  C .hgsub
  C .hgsubstate
  C sub/a
  $ hg -R sub id --id
  aa037b301eba

  $ cd ..


handle subrepos safely on qrecord

  $ mkrepo repo-2499-qrecord
  $ testadd qrecord --config ui.interactive=1 -m0 0.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % abort when adding .hgsub w/dirty subrepo
  A .hgsub
  A sub/a
  % qrecord --config ui.interactive=1 -m0 0.diff
  diff --git a/.hgsub b/.hgsub
  new file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] 
  abort: uncommitted changes in subrepository sub
  [255]
  % update substate when adding .hgsub w/clean updated subrepo
  A .hgsub
  % qrecord --config ui.interactive=1 -m0 0.diff
  diff --git a/.hgsub b/.hgsub
  new file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] 
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

  $ testmod qrecord --config ui.interactive=1 -m1 1.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % abort when modifying .hgsub w/dirty subrepo
  M .hgsub
  A sub2/a
  % qrecord --config ui.interactive=1 -m1 1.diff
  diff --git a/.hgsub b/.hgsub
  1 hunks, 1 lines changed
  examine changes to '.hgsub'? [Ynesfdaq?] 
  @@ -1,1 +1,2 @@
   sub = sub
  +sub2 = sub2
  record this change to '.hgsub'? [Ynesfdaq?] 
  abort: uncommitted changes in subrepository sub2
  [255]
  % update substate when modifying .hgsub w/clean updated subrepo
  M .hgsub
  % qrecord --config ui.interactive=1 -m1 1.diff
  diff --git a/.hgsub b/.hgsub
  1 hunks, 1 lines changed
  examine changes to '.hgsub'? [Ynesfdaq?] 
  @@ -1,1 +1,2 @@
   sub = sub
  +sub2 = sub2
  record this change to '.hgsub'? [Ynesfdaq?] 
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  path sub2
   source   sub2
   revision 1f94c7611cc6b74f5a17b16121a1170d44776845

  $ hg qpop -qa
  patch queue now empty
  $ testrm1 qrecord --config ui.interactive=1 -m2 2.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % update substate when removing .hgsub w/dirty subrepo
  M sub3/a
  R .hgsub
  % qrecord --config ui.interactive=1 -m2 2.diff
  diff --git a/.hgsub b/.hgsub
  deleted file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] 
  % debugsub should be empty

  $ hg qpop -qa
  patch queue now empty
  $ testrm2 qrecord --config ui.interactive=1 -m3 3.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % update substate when removing .hgsub w/clean updated subrepo
  R .hgsub
  % qrecord --config ui.interactive=1 -m3 3.diff
  diff --git a/.hgsub b/.hgsub
  deleted file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] 
  % debugsub should be empty

  $ cd ..


correctly handle subrepos with patch queues
  $ mkrepo repo-subrepo-with-queue
  $ mksubrepo sub
  adding a
  $ hg -R sub qnew sub0.diff
  $ echo sub = sub >> .hgsub
  $ hg add .hgsub
  $ hg qnew 0.diff

  $ cd ..

check whether MQ operations can import updated .hgsubstate correctly
both into 'revision' and 'patch file under .hg/patches':

  $ hg init importing-hgsubstate
  $ cd importing-hgsubstate

  $ echo a > a
  $ hg commit -u test -d '0 0' -Am '#0 in parent'
  adding a
  $ hg init sub
  $ echo sa > sub/sa
  $ hg -R sub commit -u test -d '0 0' -Am '#0 in sub'
  adding sa
  $ echo 'sub = sub' > .hgsub
  $ touch .hgsubstate
  $ hg add .hgsub .hgsubstate

  $ hg qnew -u test -d '0 0' import-at-qnew
  $ hg -R sub parents --template '{node} sub\n'
  b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ cat .hgsubstate
  b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ hg diff -c tip
  diff -r f499373e340c -r f69e96d86e75 .hgsub
  --- /dev/null
  +++ b/.hgsub
  @@ -0,0 +1,1 @@
  +sub = sub
  diff -r f499373e340c -r f69e96d86e75 .hgsubstate
  --- /dev/null
  +++ b/.hgsubstate
  @@ -0,0 +1,1 @@
  +b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ cat .hg/patches/import-at-qnew
  # HG changeset patch
  # Parent f499373e340cdca5d01dee904aeb42dd2a325e71
  # User test
  # Date 0 0
  
  diff -r f499373e340c -r f69e96d86e75 .hgsub
  --- /dev/null
  +++ b/.hgsub
  @@ -0,0 +1,1 @@
  +sub = sub
  diff -r f499373e340c -r f69e96d86e75 .hgsubstate
  --- /dev/null
  +++ b/.hgsubstate
  @@ -0,0 +1,1 @@
  +b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ hg parents --template '{node}\n'
  f69e96d86e75a6d4fd88285dc9697acb23951041

check also whether qnew not including ".hgsubstate" explicitly causes
as same result (in node hash) as one including it.

  $ hg qpop -a -q
  patch queue now empty
  $ hg qdelete import-at-qnew
  $ echo 'sub = sub' > .hgsub
  $ hg add .hgsub
  $ rm -f .hgsubstate
  $ hg qnew -u test -d '0 0' import-at-qnew
  $ hg parents --template '{node}\n'
  f69e96d86e75a6d4fd88285dc9697acb23951041

check whether qrefresh imports updated .hgsubstate correctly

  $ hg qpop
  popping import-at-qnew
  patch queue now empty
  $ hg qpush
  applying import-at-qnew
  now at: import-at-qnew

  $ hg qnew import-at-qrefresh
  $ echo sb > sub/sb
  $ hg -R sub commit -u test -d '0 0' -Am '#1 in sub'
  adding sb
  $ hg qrefresh -u test -d '0 0'
  $ hg -R sub parents --template '{node} sub\n'
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hgsubstate
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg diff -c tip
  diff -r 44f846335325 -r b3e8c5fa3aaa .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hg/patches/import-at-qrefresh
  # HG changeset patch
  # Date 0 0
  # User test
  # Parent 44f846335325209be6be35dc2c9a4be107278c09
  
  diff -r 44f846335325 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub

  $ hg qrefresh -u test -d '0 0'
  $ cat .hgsubstate
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg diff -c tip
  diff -r 44f846335325 -r b3e8c5fa3aaa .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hg/patches/import-at-qrefresh
  # HG changeset patch
  # Date 0 0
  # User test
  # Parent 44f846335325209be6be35dc2c9a4be107278c09
  
  diff -r 44f846335325 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub

  $ hg update -C tip
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg qpop -a
  popping import-at-qrefresh
  popping import-at-qnew
  patch queue now empty

  $ hg -R sub update -C 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo 'sub = sub' > .hgsub
  $ hg commit -Am '#1 in parent'
  adding .hgsub
  $ hg -R sub update -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg commit -Am '#2 in parent (but will be rolled back soon)'
  $ hg rollback
  repository tip rolled back to revision 1 (undo commit)
  working directory now based on revision 1
  $ hg status
  M .hgsubstate
  $ hg qnew -u test -d '0 0' checkstate-at-qnew
  $ hg -R sub parents --template '{node} sub\n'
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hgsubstate
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg diff -c tip
  diff -r 4d91eb2fa1d1 -r 1259c112d884 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hg/patches/checkstate-at-qnew
  # HG changeset patch
  # Parent 4d91eb2fa1d1b22ec513347b9cd06f6b49d470fa
  # User test
  # Date 0 0
  
  diff -r 4d91eb2fa1d1 -r 1259c112d884 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub

check whether qrefresh not including ".hgsubstate" explicitly causes
as same result (in node hash) as one including it.

  $ hg update -C -q 0
  $ hg qpop -a -q
  patch queue now empty
  $ hg qnew -u test -d '0 0' add-hgsub-at-qrefresh
  $ echo 'sub = sub' > .hgsub
  $ echo > .hgsubstate
  $ hg add .hgsub .hgsubstate
  $ hg qrefresh -u test -d '0 0'
  $ hg parents --template '{node}\n'
  7c48c35501aae6770ed9c2517014628615821a8e

  $ hg qpop -a -q
  patch queue now empty
  $ hg qdelete add-hgsub-at-qrefresh
  $ hg qnew -u test -d '0 0' add-hgsub-at-qrefresh
  $ echo 'sub = sub' > .hgsub
  $ hg add .hgsub
  $ rm -f .hgsubstate
  $ hg qrefresh -u test -d '0 0'
  $ hg parents --template '{node}\n'
  7c48c35501aae6770ed9c2517014628615821a8e

  $ cd ..

  $ cd ..