tests/test-clone-stream.t

changelog: never inline changelog

The test suite mostly use small repositories, that implies that most changelog in the
tests are inlined. As a result, non-inlined changelog are quite poorly tested.
Since non-inline changelog are most common case for serious repositories, this
lack of testing is a significant problem that results in high profile issue like
the one recently fixed by 66417f55ea33 and 849745d7da89.

Inlining the changelog does not bring much to the table, the number of total
file saved is negligible, and the changelog will be read by most operation
anyway.

So this changeset is make it so we never inline the changelog, and de-inline the
one that are still inlined whenever we touch them.

By doing that, we remove the "dual code path" situation for writing new entry to
the changelog and move to a "single code path" situation. Having a single
code path simplify the code and make sure it is covered by test (if test cover
that situation obviously)


This impact all tests that care about the number of file and the exchange size,
but there is nothing too complicated in them just a lot of churn.

The churn is made "worse" by the fact rust will use the persistent nodemap on
any changelog now. Which is overall a win as it means testing the persistent
nodemap more and having less special cases.

In short, having inline changelog is mostly useless and an endless source of
pain. We get rid of it.

#require serve no-reposimplestore no-chg

#testcases stream-legacy stream-bundle2-v2 stream-bundle2-v3

#if stream-legacy
  $ cat << EOF >> $HGRCPATH
  > [server]
  > bundle2.stream = no
  > [format]
  > # persistent nodemap is too broken with legacy format,
  > # however client with nodemap support will have better stream support.
  > use-persistent-nodemap=no
  > EOF
#endif
#if stream-bundle2-v3
  $ cat << EOF >> $HGRCPATH
  > [experimental]
  > stream-v3 = yes
  > EOF
#endif

Initialize repository

  $ hg init server
  $ cd server
  $ sh $TESTDIR/testlib/stream_clone_setup.sh
  adding 00changelog-ab349180a0405010.nd
  adding 00changelog.d
  adding 00changelog.i
  adding 00changelog.n
  adding 00manifest.d
  adding 00manifest.i
  adding container/isam-build-centos7/bazel-coverage-generator-sandboxfs-compatibility-0758e3e4f6057904d44399bd666faba9e7f40686.patch
  adding data/foo.d
  adding data/foo.i
  adding data/foo.n
  adding data/undo.babar
  adding data/undo.d
  adding data/undo.foo.d
  adding data/undo.foo.i
  adding data/undo.foo.n
  adding data/undo.i
  adding data/undo.n
  adding data/undo.py
  adding foo.d
  adding foo.i
  adding foo.n
  adding meta/foo.d
  adding meta/foo.i
  adding meta/foo.n
  adding meta/undo.babar
  adding meta/undo.d
  adding meta/undo.foo.d
  adding meta/undo.foo.i
  adding meta/undo.foo.n
  adding meta/undo.i
  adding meta/undo.n
  adding meta/undo.py
  adding savanah/foo.d
  adding savanah/foo.i
  adding savanah/foo.n
  adding savanah/undo.babar
  adding savanah/undo.d
  adding savanah/undo.foo.d
  adding savanah/undo.foo.i
  adding savanah/undo.foo.n
  adding savanah/undo.i
  adding savanah/undo.n
  adding savanah/undo.py
  adding store/C\xc3\xa9lesteVille_is_a_Capital_City (esc)
  adding store/foo.d
  adding store/foo.i
  adding store/foo.n
  adding store/undo.babar
  adding store/undo.d
  adding store/undo.foo.d
  adding store/undo.foo.i
  adding store/undo.foo.n
  adding store/undo.i
  adding store/undo.n
  adding store/undo.py
  adding undo.babar
  adding undo.d
  adding undo.foo.d
  adding undo.foo.i
  adding undo.foo.n
  adding undo.i
  adding undo.n
  adding undo.py

  $ hg --config server.uncompressed=false serve -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS
  $ cd ..

Check local clone
==================

The logic is close enough of uncompressed.
This is present here to reuse the testing around file with "special" names.

  $ hg clone server local-clone
  updating to branch default
  1088 files updated, 0 files merged, 0 files removed, 0 files unresolved

Check that the clone went well

  $ hg verify -R local-clone -q

Check uncompressed
==================

Cannot stream clone when server.uncompressed is set

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out'
  200 Script output follows
  
  1

#if stream-legacy
  $ hg debugcapabilities http://localhost:$HGPORT
  Main capabilities:
    batch
    branchmap
    $USUAL_BUNDLE2_CAPS_SERVER$
    changegroupsubset
    compression=$BUNDLE2_COMPRESSIONS$
    getbundle
    httpheader=1024
    httpmediatype=0.1rx,0.1tx,0.2tx
    known
    lookup
    pushkey
    unbundle=HG10GZ,HG10BZ,HG10UN
    unbundlehash
  Bundle2 capabilities:
    HG20
    bookmarks
    changegroup
      01
      02
      03
    checkheads
      related
    digests
      md5
      sha1
      sha512
    error
      abort
      unsupportedcontent
      pushraced
      pushkey
    hgtagsfnodes
    listkeys
    phases
      heads
    pushkey
    remote-changegroup
      http
      https

  $ hg clone --stream -U http://localhost:$HGPORT server-disabled
  warning: stream clone requested but server has them disabled
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 1088 changes to 1088 files
  new changesets 96ee1d7354c4:5223b5e3265f

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=getbundle' content-type --bodyfile body --hgproto 0.2 --requestheader "x-hgarg-1=bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Aphases%253Dheads%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=0&common=0000000000000000000000000000000000000000&heads=c17445101a72edac06facd130d14808dfbd5c7c2&stream=1"
  200 Script output follows
  content-type: application/mercurial-0.2
  

  $ f --size body --hexdump --bytes 100
  body: size=140
  0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......|
  0010: 73 0b 45 52 52 4f 52 3a 41 42 4f 52 54 00 00 00 |s.ERROR:ABORT...|
  0020: 00 01 01 07 3c 04 16 6d 65 73 73 61 67 65 73 74 |....<..messagest|
  0030: 72 65 61 6d 20 64 61 74 61 20 72 65 71 75 65 73 |ream data reques|
  0040: 74 65 64 20 62 75 74 20 73 65 72 76 65 72 20 64 |ted but server d|
  0050: 6f 65 73 20 6e 6f 74 20 61 6c 6c 6f 77 20 74 68 |oes not allow th|
  0060: 69 73 20 66                                     |is f|

#endif
#if stream-bundle2-v2
  $ hg debugcapabilities http://localhost:$HGPORT
  Main capabilities:
    batch
    branchmap
    $USUAL_BUNDLE2_CAPS_SERVER$
    changegroupsubset
    compression=$BUNDLE2_COMPRESSIONS$
    getbundle
    httpheader=1024
    httpmediatype=0.1rx,0.1tx,0.2tx
    known
    lookup
    pushkey
    unbundle=HG10GZ,HG10BZ,HG10UN
    unbundlehash
  Bundle2 capabilities:
    HG20
    bookmarks
    changegroup
      01
      02
      03
    checkheads
      related
    digests
      md5
      sha1
      sha512
    error
      abort
      unsupportedcontent
      pushraced
      pushkey
    hgtagsfnodes
    listkeys
    phases
      heads
    pushkey
    remote-changegroup
      http
      https

  $ hg clone --stream -U http://localhost:$HGPORT server-disabled
  warning: stream clone requested but server has them disabled
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 1088 changes to 1088 files
  new changesets 96ee1d7354c4:5223b5e3265f

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=getbundle' content-type --bodyfile body --hgproto 0.2 --requestheader "x-hgarg-1=bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Aphases%253Dheads%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=0&common=0000000000000000000000000000000000000000&heads=c17445101a72edac06facd130d14808dfbd5c7c2&stream=1"
  200 Script output follows
  content-type: application/mercurial-0.2
  

  $ f --size body --hexdump --bytes 100
  body: size=140
  0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......|
  0010: 73 0b 45 52 52 4f 52 3a 41 42 4f 52 54 00 00 00 |s.ERROR:ABORT...|
  0020: 00 01 01 07 3c 04 16 6d 65 73 73 61 67 65 73 74 |....<..messagest|
  0030: 72 65 61 6d 20 64 61 74 61 20 72 65 71 75 65 73 |ream data reques|
  0040: 74 65 64 20 62 75 74 20 73 65 72 76 65 72 20 64 |ted but server d|
  0050: 6f 65 73 20 6e 6f 74 20 61 6c 6c 6f 77 20 74 68 |oes not allow th|
  0060: 69 73 20 66                                     |is f|

#endif
#if stream-bundle2-v3
  $ hg debugcapabilities http://localhost:$HGPORT
  Main capabilities:
    batch
    branchmap
    $USUAL_BUNDLE2_CAPS_SERVER$
    changegroupsubset
    compression=$BUNDLE2_COMPRESSIONS$
    getbundle
    httpheader=1024
    httpmediatype=0.1rx,0.1tx,0.2tx
    known
    lookup
    pushkey
    unbundle=HG10GZ,HG10BZ,HG10UN
    unbundlehash
  Bundle2 capabilities:
    HG20
    bookmarks
    changegroup
      01
      02
      03
    checkheads
      related
    digests
      md5
      sha1
      sha512
    error
      abort
      unsupportedcontent
      pushraced
      pushkey
    hgtagsfnodes
    listkeys
    phases
      heads
    pushkey
    remote-changegroup
      http
      https

  $ hg clone --stream -U http://localhost:$HGPORT server-disabled
  warning: stream clone requested but server has them disabled
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 1088 changes to 1088 files
  new changesets 96ee1d7354c4:5223b5e3265f

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=getbundle' content-type --bodyfile body --hgproto 0.2 --requestheader "x-hgarg-1=bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Aphases%253Dheads%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=0&common=0000000000000000000000000000000000000000&heads=c17445101a72edac06facd130d14808dfbd5c7c2&stream=1"
  200 Script output follows
  content-type: application/mercurial-0.2
  

  $ f --size body --hexdump --bytes 100
  body: size=140
  0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......|
  0010: 73 0b 45 52 52 4f 52 3a 41 42 4f 52 54 00 00 00 |s.ERROR:ABORT...|
  0020: 00 01 01 07 3c 04 16 6d 65 73 73 61 67 65 73 74 |....<..messagest|
  0030: 72 65 61 6d 20 64 61 74 61 20 72 65 71 75 65 73 |ream data reques|
  0040: 74 65 64 20 62 75 74 20 73 65 72 76 65 72 20 64 |ted but server d|
  0050: 6f 65 73 20 6e 6f 74 20 61 6c 6c 6f 77 20 74 68 |oes not allow th|
  0060: 69 73 20 66                                     |is f|

#endif

  $ killdaemons.py
  $ cd server
  $ hg serve -p $HGPORT -d --pid-file=hg.pid --error errors.txt
  $ cat hg.pid > $DAEMON_PIDS
  $ cd ..

Basic clone

#if stream-legacy
  $ hg clone --stream -U http://localhost:$HGPORT clone1
  streaming all changes
  1091 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1091 files to transfer, 98.8 KB of data (zstd !)
  transferred 98.8 KB in * seconds (* */sec) (glob) (zstd !)
  searching for changes
  no changes found
  $ cat server/errors.txt
#endif
#if stream-bundle2-v2
  $ hg clone --stream -U http://localhost:$HGPORT clone1
  streaming all changes
  1094 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1094 files to transfer, 98.9 KB of data (zstd no-rust !)
  transferred 98.9 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  1096 files to transfer, 99.0 KB of data (zstd rust !)
  transferred 99.0 KB in * seconds (* */sec) (glob) (zstd rust !)

  $ ls -1 clone1/.hg/cache
  branch2-base
  branch2-immutable
  branch2-served
  branch2-served.hidden
  branch2-visible
  branch2-visible-hidden
  rbc-names-v1
  rbc-revs-v1
  tags2
  tags2-served
  $ cat server/errors.txt
#endif
#if stream-bundle2-v3
  $ hg clone --stream -U http://localhost:$HGPORT clone1
  streaming all changes
  1093 entries to transfer
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  transferred 98.9 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  transferred 99.0 KB in * seconds (* */sec) (glob) (zstd rust !)

  $ ls -1 clone1/.hg/cache
  branch2-base
  branch2-immutable
  branch2-served
  branch2-served.hidden
  branch2-visible
  branch2-visible-hidden
  rbc-names-v1
  rbc-revs-v1
  tags2
  tags2-served
  $ cat server/errors.txt
#endif

getbundle requests with stream=1 are uncompressed

  $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=getbundle' content-type --bodyfile body --hgproto '0.1 0.2 comp=zlib,none' --requestheader "x-hgarg-1=bundlecaps=HG20%2Cbundle2%3DHG20%250Abookmarks%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Aphases%253Dheads%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps%250Astream%253Dv2&cg=0&common=0000000000000000000000000000000000000000&heads=c17445101a72edac06facd130d14808dfbd5c7c2&stream=1"
  200 Script output follows
  content-type: application/mercurial-0.2
  

#if no-zstd no-rust
  $ f --size --hex --bytes 256 body
  body: size=119140
  0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......|
  0010: 62 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 |b.STREAM2.......|
  0020: 06 09 04 0c 26 62 79 74 65 63 6f 75 6e 74 31 30 |....&bytecount10|
  0030: 34 31 31 35 66 69 6c 65 63 6f 75 6e 74 31 30 39 |4115filecount109|
  0040: 34 72 65 71 75 69 72 65 6d 65 6e 74 73 67 65 6e |4requirementsgen|
  0050: 65 72 61 6c 64 65 6c 74 61 25 32 43 72 65 76 6c |eraldelta%2Crevl|
  0060: 6f 67 76 31 25 32 43 73 70 61 72 73 65 72 65 76 |ogv1%2Csparserev|
  0070: 6c 6f 67 00 00 80 00 73 08 42 64 61 74 61 2f 30 |log....s.Bdata/0|
  0080: 2e 69 00 03 00 01 00 00 00 00 00 00 00 02 00 00 |.i..............|
  0090: 00 01 00 00 00 00 00 00 00 01 ff ff ff ff ff ff |................|
  00a0: ff ff 80 29 63 a0 49 d3 23 87 bf ce fe 56 67 92 |...)c.I.#....Vg.|
  00b0: 67 2c 69 d1 ec 39 00 00 00 00 00 00 00 00 00 00 |g,i..9..........|
  00c0: 00 00 75 30 73 26 45 64 61 74 61 2f 30 30 63 68 |..u0s&Edata/00ch|
  00d0: 61 6e 67 65 6c 6f 67 2d 61 62 33 34 39 31 38 30 |angelog-ab349180|
  00e0: 61 30 34 30 35 30 31 30 2e 6e 64 2e 69 00 03 00 |a0405010.nd.i...|
  00f0: 01 00 00 00 00 00 00 00 05 00 00 00 04 00 00 00 |................|
#endif
#if zstd no-rust
  $ f --size --hex --bytes 256 body
  body: size=116327 (no-bigendian !)
  body: size=116322 (bigendian !)
  0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......|
  0010: 7c 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 ||.STREAM2.......|
  0020: 06 09 04 0c 40 62 79 74 65 63 6f 75 6e 74 31 30 |....@bytecount10|
  0030: 31 32 37 36 66 69 6c 65 63 6f 75 6e 74 31 30 39 |1276filecount109| (no-bigendian !)
  0030: 31 32 37 31 66 69 6c 65 63 6f 75 6e 74 31 30 39 |1271filecount109| (bigendian !)
  0040: 34 72 65 71 75 69 72 65 6d 65 6e 74 73 67 65 6e |4requirementsgen|
  0050: 65 72 61 6c 64 65 6c 74 61 25 32 43 72 65 76 6c |eraldelta%2Crevl|
  0060: 6f 67 2d 63 6f 6d 70 72 65 73 73 69 6f 6e 2d 7a |og-compression-z|
  0070: 73 74 64 25 32 43 72 65 76 6c 6f 67 76 31 25 32 |std%2Crevlogv1%2|
  0080: 43 73 70 61 72 73 65 72 65 76 6c 6f 67 00 00 80 |Csparserevlog...|
  0090: 00 73 08 42 64 61 74 61 2f 30 2e 69 00 03 00 01 |.s.Bdata/0.i....|
  00a0: 00 00 00 00 00 00 00 02 00 00 00 01 00 00 00 00 |................|
  00b0: 00 00 00 01 ff ff ff ff ff ff ff ff 80 29 63 a0 |.............)c.|
  00c0: 49 d3 23 87 bf ce fe 56 67 92 67 2c 69 d1 ec 39 |I.#....Vg.g,i..9|
  00d0: 00 00 00 00 00 00 00 00 00 00 00 00 75 30 73 26 |............u0s&|
  00e0: 45 64 61 74 61 2f 30 30 63 68 61 6e 67 65 6c 6f |Edata/00changelo|
  00f0: 67 2d 61 62 33 34 39 31 38 30 61 30 34 30 35 30 |g-ab349180a04050|
#endif
#if zstd rust no-dirstate-v2
  $ f --size --hex --bytes 256 body
  body: size=116310 (no-rust !)
  body: size=116495 (rust no-stream-legacy no-bigendian !)
  body: size=116490 (rust no-stream-legacy bigendian !)
  body: size=116327 (rust stream-legacy no-bigendian !)
  body: size=116322 (rust stream-legacy bigendian !)
  0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......|
  0010: 7c 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 ||.STREAM2.......|
  0020: 06 09 04 0c 40 62 79 74 65 63 6f 75 6e 74 31 30 |....@bytecount10|
  0030: 31 32 37 36 66 69 6c 65 63 6f 75 6e 74 31 30 39 |1276filecount109| (no-rust !)
  0040: 33 72 65 71 75 69 72 65 6d 65 6e 74 73 67 65 6e |3requirementsgen| (no-rust !)
  0030: 31 34 30 32 66 69 6c 65 63 6f 75 6e 74 31 30 39 |1402filecount109| (rust no-stream-legacy no-bigendian !)
  0030: 31 33 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 39 |1397filecount109| (rust no-stream-legacy bigendian !)
  0040: 36 72 65 71 75 69 72 65 6d 65 6e 74 73 67 65 6e |6requirementsgen| (rust no-stream-legacy !)
  0030: 31 32 37 36 66 69 6c 65 63 6f 75 6e 74 31 30 39 |1276filecount109| (rust stream-legacy no-bigendian !)
  0030: 31 32 37 31 66 69 6c 65 63 6f 75 6e 74 31 30 39 |1271filecount109| (rust stream-legacy bigendian !)
  0040: 34 72 65 71 75 69 72 65 6d 65 6e 74 73 67 65 6e |4requirementsgen| (rust stream-legacy !)
  0050: 65 72 61 6c 64 65 6c 74 61 25 32 43 72 65 76 6c |eraldelta%2Crevl|
  0060: 6f 67 2d 63 6f 6d 70 72 65 73 73 69 6f 6e 2d 7a |og-compression-z|
  0070: 73 74 64 25 32 43 72 65 76 6c 6f 67 76 31 25 32 |std%2Crevlogv1%2|
  0080: 43 73 70 61 72 73 65 72 65 76 6c 6f 67 00 00 80 |Csparserevlog...|
  0090: 00 73 08 42 64 61 74 61 2f 30 2e 69 00 03 00 01 |.s.Bdata/0.i....|
  00a0: 00 00 00 00 00 00 00 02 00 00 00 01 00 00 00 00 |................|
  00b0: 00 00 00 01 ff ff ff ff ff ff ff ff 80 29 63 a0 |.............)c.|
  00c0: 49 d3 23 87 bf ce fe 56 67 92 67 2c 69 d1 ec 39 |I.#....Vg.g,i..9|
  00d0: 00 00 00 00 00 00 00 00 00 00 00 00 75 30 73 26 |............u0s&|
  00e0: 45 64 61 74 61 2f 30 30 63 68 61 6e 67 65 6c 6f |Edata/00changelo|
  00f0: 67 2d 61 62 33 34 39 31 38 30 61 30 34 30 35 30 |g-ab349180a04050|
#endif
#if zstd dirstate-v2
  $ f --size --hex --bytes 256 body
  body: size=109549
  0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......|
  0010: c0 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 |..STREAM2.......|
  0020: 05 09 04 0c 85 62 79 74 65 63 6f 75 6e 74 39 35 |.....bytecount95|
  0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 |897filecount1030|
  0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 |requirementsdote|
  0050: 6e 63 6f 64 65 25 32 43 65 78 70 2d 64 69 72 73 |ncode%2Cexp-dirs|
  0060: 74 61 74 65 2d 76 32 25 32 43 66 6e 63 61 63 68 |tate-v2%2Cfncach|
  0070: 65 25 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 |e%2Cgeneraldelta|
  0080: 25 32 43 70 65 72 73 69 73 74 65 6e 74 2d 6e 6f |%2Cpersistent-no|
  0090: 64 65 6d 61 70 25 32 43 72 65 76 6c 6f 67 2d 63 |demap%2Crevlog-c|
  00a0: 6f 6d 70 72 65 73 73 69 6f 6e 2d 7a 73 74 64 25 |ompression-zstd%|
  00b0: 32 43 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 |2Crevlogv1%2Cspa|
  00c0: 72 73 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 |rserevlog%2Cstor|
  00d0: 65 00 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 |e....s.Bdata/0.i|
  00e0: 00 03 00 01 00 00 00 00 00 00 00 02 00 00 00 01 |................|
  00f0: 00 00 00 00 00 00 00 01 ff ff ff ff ff ff ff ff |................|
#endif

--uncompressed is an alias to --stream

#if stream-legacy
  $ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed
  streaming all changes
  1091 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1091 files to transfer, 98.8 KB of data (zstd !)
  transferred 98.8 KB in * seconds (* */sec) (glob) (zstd !)
  searching for changes
  no changes found
#endif
#if stream-bundle2-v2
  $ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed
  streaming all changes
  1094 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1094 files to transfer, 98.9 KB of data (zstd no-rust !)
  transferred 98.9 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  1096 files to transfer, 99.0 KB of data (zstd rust !)
  transferred 99.0 KB in * seconds (* */sec) (glob) (zstd rust !)
#endif
#if stream-bundle2-v3
  $ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed
  streaming all changes
  1093 entries to transfer
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  transferred 98.9 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  transferred 99.0 KB in * seconds (* */sec) (glob) (zstd rust !)
#endif

Clone with background file closing enabled

#if stream-legacy
  $ hg --debug --config worker.backgroundclose=true --config worker.backgroundcloseminfilecount=1 clone --stream -U http://localhost:$HGPORT clone-background | grep -v adding
  using http://localhost:$HGPORT/
  sending capabilities command
  sending branchmap command
  streaming all changes
  sending stream_out command
  1091 files to transfer, 102 KB of data (no-zstd !)
  1091 files to transfer, 98.8 KB of data (zstd !)
  starting 4 threads for background file closing
  updating the branch cache
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  transferred 98.8 KB in * seconds (* */sec) (glob) (zstd !)
  query 1; heads
  sending batch command
  searching for changes
  all remote heads known locally
  no changes found
  sending getbundle command
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-part: "phase-heads" supported
  bundle2-input-part: total payload size 24
  bundle2-input-bundle: 2 parts total
  checking for updated bookmarks
  updating the branch cache
  (sent 5 HTTP requests and * bytes; received * bytes in responses) (glob)
#endif
#if stream-bundle2-v2
  $ hg --debug --config worker.backgroundclose=true --config worker.backgroundcloseminfilecount=1 clone --stream -U http://localhost:$HGPORT clone-background | grep -v adding
  using http://localhost:$HGPORT/
  sending capabilities command
  query 1; heads
  sending batch command
  streaming all changes
  sending getbundle command
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "stream2" (params: 3 mandatory) supported
  applying stream bundle
  1094 files to transfer, 102 KB of data (no-zstd !)
  1094 files to transfer, 98.9 KB of data (zstd no-rust !)
  1096 files to transfer, 99.0 KB of data (zstd rust !)
  starting 4 threads for background file closing
  starting 4 threads for background file closing
  updating the branch cache
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  bundle2-input-part: total payload size 119001 (no-zstd !)
  transferred 98.9 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  transferred 99.0 KB in * seconds (* */sec) (glob) (zstd rust !)
  bundle2-input-part: total payload size 116162 (zstd no-bigendian no-rust !)
  bundle2-input-part: total payload size 116330 (zstd no-bigendian rust !)
  bundle2-input-part: total payload size 116157 (zstd bigendian no-rust !)
  bundle2-input-part: total payload size 116325 (zstd bigendian rust !)
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-bundle: 2 parts total
  checking for updated bookmarks
  updating the branch cache
  (sent 3 HTTP requests and * bytes; received * bytes in responses) (glob)
#endif
#if stream-bundle2-v3
  $ hg --debug --config worker.backgroundclose=true --config worker.backgroundcloseminfilecount=1 clone --stream -U http://localhost:$HGPORT clone-background | grep -v adding
  using http://localhost:$HGPORT/
  sending capabilities command
  query 1; heads
  sending batch command
  streaming all changes
  sending getbundle command
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "stream3-exp" (params: 1 mandatory) supported
  applying stream bundle
  1093 entries to transfer
  starting 4 threads for background file closing
  starting 4 threads for background file closing
  updating the branch cache
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  bundle2-input-part: total payload size 120096 (no-zstd !)
  transferred 98.9 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  transferred 99.0 KB in * seconds (* */sec) (glob) (zstd rust !)
  bundle2-input-part: total payload size 117257 (zstd no-rust no-bigendian !)
  bundle2-input-part: total payload size 117425 (zstd rust no-bigendian !)
  bundle2-input-part: total payload size 117252 (zstd bigendian no-rust !)
  bundle2-input-part: total payload size 117420 (zstd bigendian rust !)
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-bundle: 2 parts total
  checking for updated bookmarks
  updating the branch cache
  (sent 3 HTTP requests and * bytes; received * bytes in responses) (glob)
#endif

Cannot stream clone when there are secret changesets

  $ hg -R server phase --force --secret -r tip
  $ hg clone --stream -U http://localhost:$HGPORT secret-denied
  warning: stream clone requested but server has them disabled
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1025 changes to 1025 files
  new changesets 96ee1d7354c4:c17445101a72

  $ killdaemons.py

Streaming of secrets can be overridden by server config

  $ cd server
  $ hg serve --config server.uncompressedallowsecret=true -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS
  $ cd ..

#if stream-legacy
  $ hg clone --stream -U http://localhost:$HGPORT secret-allowed
  streaming all changes
  1091 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1091 files to transfer, 98.8 KB of data (zstd !)
  transferred 98.8 KB in * seconds (* */sec) (glob) (zstd !)
  searching for changes
  no changes found
#endif
#if stream-bundle2-v2
  $ hg clone --stream -U http://localhost:$HGPORT secret-allowed
  streaming all changes
  1094 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1094 files to transfer, 98.9 KB of data (zstd no-rust !)
  transferred 98.9 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  1096 files to transfer, 99.0 KB of data (zstd rust !)
  transferred 99.0 KB in * seconds (* */sec) (glob) (zstd rust !)
#endif
#if stream-bundle2-v3
  $ hg clone --stream -U http://localhost:$HGPORT secret-allowed
  streaming all changes
  1093 entries to transfer
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  transferred 98.9 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  transferred 99.0 KB in * seconds (* */sec) (glob) (zstd rust !)
#endif

  $ killdaemons.py

Verify interaction between preferuncompressed and secret presence

  $ cd server
  $ hg serve --config server.preferuncompressed=true -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS
  $ cd ..

  $ hg clone -U http://localhost:$HGPORT preferuncompressed-secret
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1025 changes to 1025 files
  new changesets 96ee1d7354c4:c17445101a72

  $ killdaemons.py

Clone not allowed when full bundles disabled and can't serve secrets

  $ cd server
  $ hg serve --config server.disablefullbundle=true -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS
  $ cd ..

  $ hg clone --stream http://localhost:$HGPORT secret-full-disabled
  warning: stream clone requested but server has them disabled
  requesting all changes
  remote: abort: server has pull-based clones disabled
  abort: pull failed on remote
  (remove --pull if specified or upgrade Mercurial)
  [100]

Local stream clone with secrets involved
(This is just a test over behavior: if you have access to the repo's files,
there is no security so it isn't important to prevent a clone here.)

  $ hg clone -U --stream server local-secret
  warning: stream clone requested but server has them disabled
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1025 changes to 1025 files
  new changesets 96ee1d7354c4:c17445101a72

Stream clone while repo is changing:

  $ mkdir changing
  $ cd changing

prepare repo with small and big file to cover both code paths in emitrevlogdata

  $ hg init repo
  $ touch repo/f1
  $ $TESTDIR/seq.py 50000 > repo/f2
  $ hg -R repo ci -Aqm "0"
  $ HG_TEST_STREAM_WALKED_FILE_1="$TESTTMP/sync_file_walked_1"
  $ export HG_TEST_STREAM_WALKED_FILE_1
  $ HG_TEST_STREAM_WALKED_FILE_2="$TESTTMP/sync_file_walked_2"
  $ export HG_TEST_STREAM_WALKED_FILE_2
  $ HG_TEST_STREAM_WALKED_FILE_3="$TESTTMP/sync_file_walked_3"
  $ export HG_TEST_STREAM_WALKED_FILE_3
#   $ cat << EOF >> $HGRCPATH
#   > [hooks]
#   > pre-clone=rm -f "$TESTTMP/sync_file_walked_*"
#   > EOF
  $ hg serve -R repo -p $HGPORT1 -d --error errors.log --pid-file=hg.pid --config extensions.stream_steps="$RUNTESTDIR/testlib/ext-stream-clone-steps.py"
  $ cat hg.pid >> $DAEMON_PIDS

clone while modifying the repo between stating file with write lock and
actually serving file content

  $ (hg clone -q --stream -U http://localhost:$HGPORT1 clone; touch "$HG_TEST_STREAM_WALKED_FILE_3") &
  $ $RUNTESTDIR/testlib/wait-on-file 10 $HG_TEST_STREAM_WALKED_FILE_1
  $ echo >> repo/f1
  $ echo >> repo/f2
  $ hg -R repo ci -m "1" --config ui.timeout.warn=-1
  $ touch $HG_TEST_STREAM_WALKED_FILE_2
  $ $RUNTESTDIR/testlib/wait-on-file 10 $HG_TEST_STREAM_WALKED_FILE_3
  $ hg -R clone id
  000000000000
  $ cat errors.log
  $ cd ..

Stream repository with bookmarks
--------------------------------

(revert introduction of secret changeset)

  $ hg -R server phase --draft 'secret()'

add a bookmark

  $ hg -R server bookmark -r tip some-bookmark

clone it

#if stream-legacy
  $ hg clone --stream http://localhost:$HGPORT with-bookmarks
  streaming all changes
  1091 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1091 files to transfer, 98.8 KB of data (zstd !)
  transferred 98.8 KB in * seconds (* */sec) (glob) (zstd !)
  searching for changes
  no changes found
  updating to branch default
  1088 files updated, 0 files merged, 0 files removed, 0 files unresolved
#endif
#if stream-bundle2-v2
  $ hg clone --stream http://localhost:$HGPORT with-bookmarks
  streaming all changes
  1097 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1097 files to transfer, 99.1 KB of data (zstd no-rust !)
  transferred 99.1 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  1099 files to transfer, 99.2 KB of data (zstd rust !)
  transferred 99.2 KB in * seconds (* */sec) (glob) (zstd rust !)
  updating to branch default
  1088 files updated, 0 files merged, 0 files removed, 0 files unresolved
#endif
#if stream-bundle2-v3
  $ hg clone --stream http://localhost:$HGPORT with-bookmarks
  streaming all changes
  1096 entries to transfer
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  transferred 99.1 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  transferred 99.2 KB in * seconds (* */sec) (glob) (zstd rust !)
  updating to branch default
  1088 files updated, 0 files merged, 0 files removed, 0 files unresolved
#endif
  $ hg verify -R with-bookmarks -q
  $ hg -R with-bookmarks bookmarks
     some-bookmark             2:5223b5e3265f

Stream repository with phases
-----------------------------

Clone as publishing

  $ hg -R server phase -r 'all()'
  0: draft
  1: draft
  2: draft

#if stream-legacy
  $ hg clone --stream http://localhost:$HGPORT phase-publish
  streaming all changes
  1091 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1091 files to transfer, 98.8 KB of data (zstd !)
  transferred 98.8 KB in * seconds (* */sec) (glob) (zstd !)
  searching for changes
  no changes found
  updating to branch default
  1088 files updated, 0 files merged, 0 files removed, 0 files unresolved
#endif
#if stream-bundle2-v2
  $ hg clone --stream http://localhost:$HGPORT phase-publish
  streaming all changes
  1097 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1097 files to transfer, 99.1 KB of data (zstd no-rust !)
  transferred 99.1 KB in * seconds (* */sec) (glob) (zstd  no-rust !)
  1099 files to transfer, 99.2 KB of data (zstd rust !)
  transferred 99.2 KB in * seconds (* */sec) (glob) (zstd rust !)
  updating to branch default
  1088 files updated, 0 files merged, 0 files removed, 0 files unresolved
#endif
#if stream-bundle2-v3
  $ hg clone --stream http://localhost:$HGPORT phase-publish
  streaming all changes
  1096 entries to transfer
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  transferred 99.1 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  transferred 99.2 KB in * seconds (* */sec) (glob) (zstd rust !)
  updating to branch default
  1088 files updated, 0 files merged, 0 files removed, 0 files unresolved
#endif
  $ hg verify -R phase-publish -q
  $ hg -R phase-publish phase -r 'all()'
  0: public
  1: public
  2: public

Clone as non publishing

  $ cat << EOF >> server/.hg/hgrc
  > [phases]
  > publish = False
  > EOF
  $ killdaemons.py
  $ hg -R server serve -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS

#if stream-legacy

With v1 of the stream protocol, changeset are always cloned as public. It make
stream v1 unsuitable for non-publishing repository.

  $ hg clone --stream http://localhost:$HGPORT phase-no-publish
  streaming all changes
  1091 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1091 files to transfer, 98.8 KB of data (zstd !)
  transferred 98.8 KB in * seconds (* */sec) (glob) (zstd !)
  searching for changes
  no changes found
  updating to branch default
  1088 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R phase-no-publish phase -r 'all()'
  0: public
  1: public
  2: public
#endif
#if stream-bundle2-v2
  $ hg clone --stream http://localhost:$HGPORT phase-no-publish
  streaming all changes
  1098 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1098 files to transfer, 99.1 KB of data (zstd no-rust !)
  transferred 99.1 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  1100 files to transfer, 99.2 KB of data (zstd rust !)
  transferred 99.2 KB in * seconds (* */sec) (glob) (zstd rust !)
  updating to branch default
  1088 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R phase-no-publish phase -r 'all()'
  0: draft
  1: draft
  2: draft
#endif
#if stream-bundle2-v3
  $ hg clone --stream http://localhost:$HGPORT phase-no-publish
  streaming all changes
  1097 entries to transfer
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  transferred 99.1 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  transferred 99.2 KB in * seconds (* */sec) (glob) (zstd rust !)
  updating to branch default
  1088 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R phase-no-publish phase -r 'all()'
  0: draft
  1: draft
  2: draft
#endif
  $ hg verify -R phase-no-publish -q

  $ killdaemons.py

#if stream-legacy

With v1 of the stream protocol, changeset are always cloned as public. There's
no obsolescence markers exchange in stream v1.

#endif
#if stream-bundle2-v2

Stream repository with obsolescence
-----------------------------------

Clone non-publishing with obsolescence

  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > evolution=all
  > EOF

  $ cd server
  $ echo foo > foo
  $ hg -q commit -m 'about to be pruned'
  $ hg debugobsolete `hg log -r . -T '{node}'` -d '0 0' -u test --record-parents
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg up null -q
  $ hg log -T '{rev}: {phase}\n'
  2: draft
  1: draft
  0: draft
  $ hg serve -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS
  $ cd ..

  $ hg clone -U --stream http://localhost:$HGPORT with-obsolescence
  streaming all changes
  1099 files to transfer, 102 KB of data (no-zstd !)
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  1099 files to transfer, 99.5 KB of data (zstd no-rust !)
  transferred 99.5 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  1101 files to transfer, 99.6 KB of data (zstd rust !)
  transferred 99.6 KB in * seconds (* */sec) (glob) (zstd rust !)
  $ hg -R with-obsolescence log -T '{rev}: {phase}\n'
  2: draft
  1: draft
  0: draft
  $ hg debugobsolete -R with-obsolescence
  8c206a663911c1f97f2f9d7382e417ae55872cfa 0 {5223b5e3265f0df40bb743da62249413d74ac70f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ hg verify -R with-obsolescence -q

  $ hg clone -U --stream --config experimental.evolution=0 http://localhost:$HGPORT with-obsolescence-no-evolution
  streaming all changes
  remote: abort: server has obsolescence markers, but client cannot receive them via stream clone
  abort: pull failed on remote
  [100]

  $ killdaemons.py

#endif
#if stream-bundle2-v3

Stream repository with obsolescence
-----------------------------------

Clone non-publishing with obsolescence

  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > evolution=all
  > EOF

  $ cd server
  $ echo foo > foo
  $ hg -q commit -m 'about to be pruned'
  $ hg debugobsolete `hg log -r . -T '{node}'` -d '0 0' -u test --record-parents
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg up null -q
  $ hg log -T '{rev}: {phase}\n'
  2: draft
  1: draft
  0: draft
  $ hg serve -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid > $DAEMON_PIDS
  $ cd ..

  $ hg clone -U --stream http://localhost:$HGPORT with-obsolescence
  streaming all changes
  1098 entries to transfer
  transferred 102 KB in * seconds (* */sec) (glob) (no-zstd !)
  transferred 99.5 KB in * seconds (* */sec) (glob) (zstd no-rust !)
  transferred 99.6 KB in * seconds (* */sec) (glob) (zstd rust !)
  $ hg -R with-obsolescence log -T '{rev}: {phase}\n'
  2: draft
  1: draft
  0: draft
  $ hg debugobsolete -R with-obsolescence
  8c206a663911c1f97f2f9d7382e417ae55872cfa 0 {5223b5e3265f0df40bb743da62249413d74ac70f} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ hg verify -R with-obsolescence -q

  $ hg clone -U --stream --config experimental.evolution=0 http://localhost:$HGPORT with-obsolescence-no-evolution
  streaming all changes
  remote: abort: server has obsolescence markers, but client cannot receive them via stream clone
  abort: pull failed on remote
  [100]

  $ killdaemons.py

#endif

Cloning a repo with no requirements doesn't give some obscure error

  $ mkdir -p empty-repo/.hg
  $ hg clone -q --stream ssh://user@dummy/empty-repo empty-repo2
  $ hg --cwd empty-repo2 verify -q

Cloning a repo with an empty manifestlog doesn't give some weird error

  $ rm -r empty-repo; hg init empty-repo
  $ (cd empty-repo; touch x; hg commit -Am empty; hg debugstrip -r 0) > /dev/null
  $ hg clone -q --stream ssh://user@dummy/empty-repo empty-repo3
  $ hg --cwd empty-repo3 verify -q 2>&1 | grep -v warning
  [1]

The warnings filtered out here are talking about zero-length 'orphan' data files.
Those are harmless, so that's fine.