annotate tests/test-revset.t @ 33003:f63d111258da

revset: add startdepth limit to ancestors() as internal option

This is necessary to implement the set{gen} (set subscript) operator. For
example, set{-n} will be translated to ancestors(set, depth=n, startdepth=n).

https://www.mercurial-scm.org/wiki/RevsetOperatorPlan#ideas_from_mpm

The UI is undecided and I doubt if the startdepth option would be actually
useful, so the option is hidden for now. 'depth' could be extended to take
min:max range, in which case, integer depth should select a single generation.

  ancestors(set, depth=:y)  # scan up to y-th generation
  ancestors(set, depth=x:)  # skip until (x-1)-th generation
  ancestors(set, depth=x)   # select only x-th generation

Any ideas are welcomed.

  # reverse(ancestors(tip)) using hg repo
  3) 0.075951
  4) 0.076175

  $ HGENCODING=utf-8
  $ export HGENCODING
  $ cat > testrevset.py << EOF
  > import mercurial.revset
  > 
  > baseset = mercurial.revset.baseset
  > 
  > def r3232(repo, subset, x):
  >     """"simple revset that return [3,2,3,2]
  > 
  >     revisions duplicated on purpose.
  >     """
  >     if 3 not in subset:
  >        if 2 in subset:
  >            return baseset([2,2])
  >        return baseset()
  >     return baseset([3,3,2,2])
  > 
  > mercurial.revset.symbols['r3232'] = r3232
  > EOF
  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > testrevset=$TESTTMP/testrevset.py
  > EOF

  $ try() {
  >   hg debugrevspec --debug "$@"
  > }

  $ log() {
  >   hg log --template '{rev}\n' -r "$1"
  > }

extension to build '_intlist()' and '_hexlist()', which is necessary because
these predicates use '\0' as a separator:

  $ cat <<EOF > debugrevlistspec.py
  > from __future__ import absolute_import
  > from mercurial import (
  >     node as nodemod,
  >     registrar,
  >     revset,
  >     revsetlang,
  >     smartset,
  > )
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command('debugrevlistspec',
  >     [('', 'optimize', None, 'print parsed tree after optimizing'),
  >      ('', 'bin', None, 'unhexlify arguments')])
  > def debugrevlistspec(ui, repo, fmt, *args, **opts):
  >     if opts['bin']:
  >         args = map(nodemod.bin, args)
  >     expr = revsetlang.formatspec(fmt, list(args))
  >     if ui.verbose:
  >         tree = revsetlang.parse(expr, lookup=repo.__contains__)
  >         ui.note(revsetlang.prettyformat(tree), "\n")
  >         if opts["optimize"]:
  >             opttree = revsetlang.optimize(revsetlang.analyze(tree))
  >             ui.note("* optimized:\n", revsetlang.prettyformat(opttree),
  >                     "\n")
  >     func = revset.match(ui, expr, repo)
  >     revs = func(repo)
  >     if ui.verbose:
  >         ui.note("* set:\n", smartset.prettyformat(revs), "\n")
  >     for c in revs:
  >         ui.write("%s\n" % c)
  > EOF
  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > debugrevlistspec = $TESTTMP/debugrevlistspec.py
  > EOF
  $ trylist() {
  >   hg debugrevlistspec --debug "$@"
  > }

  $ hg init repo
  $ cd repo

  $ echo a > a
  $ hg branch a
  marked working directory as branch a
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -Aqm0

  $ echo b > b
  $ hg branch b
  marked working directory as branch b
  $ hg ci -Aqm1

  $ rm a
  $ hg branch a-b-c-
  marked working directory as branch a-b-c-
  $ hg ci -Aqm2 -u Bob

  $ hg log -r "extra('branch', 'a-b-c-')" --template '{rev}\n'
  2
  $ hg log -r "extra('branch')" --template '{rev}\n'
  0
  1
  2
  $ hg log -r "extra('branch', 're:a')" --template '{rev} {branch}\n'
  0 a
  2 a-b-c-

  $ hg co 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch +a+b+c+
  marked working directory as branch +a+b+c+
  $ hg ci -Aqm3

  $ hg co 2  # interleave
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo bb > b
  $ hg branch -- -a-b-c-
  marked working directory as branch -a-b-c-
  $ hg ci -Aqm4 -d "May 12 2005"

  $ hg co 3
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch !a/b/c/
  marked working directory as branch !a/b/c/
  $ hg ci -Aqm"5 bug"

  $ hg merge 4
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg branch _a_b_c_
  marked working directory as branch _a_b_c_
  $ hg ci -Aqm"6 issue619"

  $ hg branch .a.b.c.
  marked working directory as branch .a.b.c.
  $ hg ci -Aqm7

  $ hg branch all
  marked working directory as branch all

  $ hg co 4
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch é
  marked working directory as branch \xc3\xa9 (esc)
  $ hg ci -Aqm9

  $ hg tag -r6 1.0
  $ hg bookmark -r6 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  $ hg clone --quiet -U -r 7 . ../remote1
  $ hg clone --quiet -U -r 8 . ../remote2
  $ echo "[paths]" >> .hg/hgrc
  $ echo "default = ../remote1" >> .hg/hgrc

trivial

  $ try 0:1
  (range
    ('symbol', '0')
    ('symbol', '1'))
  * set:
  <spanset+ 0:2>
  0
  1
  $ try --optimize :
  (rangeall
    None)
  * optimized:
  (rangeall
    None
    define)
  * set:
  <spanset+ 0:10>
  0
  1
  2
  3
  4
  5
  6
  7
  8
  9
  $ try 3::6
  (dagrange
    ('symbol', '3')
    ('symbol', '6'))
  * set:
  <baseset+ [3, 5, 6]>
  3
  5
  6
  $ try '0|1|2'
  (or
    (list
      ('symbol', '0')
      ('symbol', '1')
      ('symbol', '2')))
  * set:
  <baseset [0, 1, 2]>
  0
  1
  2

names that should work without quoting

  $ try a
  ('symbol', 'a')
  * set:
  <baseset [0]>
  0
  $ try b-a
  (minus
    ('symbol', 'b')
    ('symbol', 'a'))
  * set:
  <filteredset
    <baseset [1]>,
    <not
      <baseset [0]>>>
  1
  $ try _a_b_c_
  ('symbol', '_a_b_c_')
  * set:
  <baseset [6]>
  6
  $ try _a_b_c_-a
  (minus
    ('symbol', '_a_b_c_')
    ('symbol', 'a'))
  * set:
  <filteredset
    <baseset [6]>,
    <not
      <baseset [0]>>>
  6
  $ try .a.b.c.
  ('symbol', '.a.b.c.')
  * set:
  <baseset [7]>
  7
  $ try .a.b.c.-a
  (minus
    ('symbol', '.a.b.c.')
    ('symbol', 'a'))
  * set:
  <filteredset
    <baseset [7]>,
    <not
      <baseset [0]>>>
  7

names that should be caught by fallback mechanism

  $ try -- '-a-b-c-'
  ('symbol', '-a-b-c-')
  * set:
  <baseset [4]>
  4
  $ log -a-b-c-
  4
  $ try '+a+b+c+'
  ('symbol', '+a+b+c+')
  * set:
  <baseset [3]>
  3
  $ try '+a+b+c+:'
  (rangepost
    ('symbol', '+a+b+c+'))
  * set:
  <spanset+ 3:10>
  3
  4
  5
  6
  7
  8
  9
  $ try ':+a+b+c+'
  (rangepre
    ('symbol', '+a+b+c+'))
  * set:
  <spanset+ 0:4>
  0
  1
  2
  3
  $ try -- '-a-b-c-:+a+b+c+'
  (range
    ('symbol', '-a-b-c-')
    ('symbol', '+a+b+c+'))
  * set:
  <spanset- 3:5>
  4
  3
  $ log '-a-b-c-:+a+b+c+'
  4
  3

  $ try -- -a-b-c--a # complains
  (minus
    (minus
      (minus
        (negate
          ('symbol', 'a'))
        ('symbol', 'b'))
      ('symbol', 'c'))
    (negate
      ('symbol', 'a')))
  abort: unknown revision '-a'!
  [255]
  $ try é
  ('symbol', '\xc3\xa9')
  * set:
  <baseset [9]>
  9

no quoting needed

  $ log ::a-b-c-
  0
  1
  2

quoting needed

  $ try '"-a-b-c-"-a'
  (minus
    ('string', '-a-b-c-')
    ('symbol', 'a'))
  * set:
  <filteredset
    <baseset [4]>,
    <not
      <baseset [0]>>>
  4

  $ log '1 or 2'
  1
  2
  $ log '1|2'
  1
  2
  $ log '1 and 2'
  $ log '1&2'
  $ try '1&2|3' # precedence - and is higher
  (or
    (list
      (and
        ('symbol', '1')
        ('symbol', '2'))
      ('symbol', '3')))
  * set:
  <addset
    <baseset []>,
    <baseset [3]>>
  3
  $ try '1|2&3'
  (or
    (list
      ('symbol', '1')
      (and
        ('symbol', '2')
        ('symbol', '3'))))
  * set:
  <addset
    <baseset [1]>,
    <baseset []>>
  1
  $ try '1&2&3' # associativity
  (and
    (and
      ('symbol', '1')
      ('symbol', '2'))
    ('symbol', '3'))
  * set:
  <baseset []>
  $ try '1|(2|3)'
  (or
    (list
      ('symbol', '1')
      (group
        (or
          (list
            ('symbol', '2')
            ('symbol', '3'))))))
  * set:
  <addset
    <baseset [1]>,
    <baseset [2, 3]>>
  1
  2
  3
  $ log '1.0' # tag
  6
  $ log 'a' # branch
  0
  $ log '2785f51ee'
  0
  $ log 'date(2005)'
  4
  $ log 'date(this is a test)'
  hg: parse error at 10: unexpected token: symbol
  [255]
  $ log 'date()'
  hg: parse error: date requires a string
  [255]
  $ log 'date'
  abort: unknown revision 'date'!
  [255]
  $ log 'date('
  hg: parse error at 5: not a prefix: end
  [255]
  $ log 'date("\xy")'
  hg: parse error: invalid \x escape
  [255]
  $ log 'date(tip)'
  hg: parse error: invalid date: 'tip'
  [255]
  $ log '0:date'
  abort: unknown revision 'date'!
  [255]
  $ log '::"date"'
  abort: unknown revision 'date'!
  [255]
  $ hg book date -r 4
  $ log '0:date'
  0
  1
  2
  3
  4
  $ log '::date'
  0
  1
  2
  4
  $ log '::"date"'
  0
  1
  2
  4
  $ log 'date(2005) and 1::'
  4
  $ hg book -d date

function name should be a symbol

  $ log '"date"(2005)'
  hg: parse error: not a symbol
  [255]

keyword arguments

  $ log 'extra(branch, value=a)'
  0

  $ log 'extra(branch, a, b)'
  hg: parse error: extra takes at most 2 positional arguments
  [255]
  $ log 'extra(a, label=b)'
  hg: parse error: extra got multiple values for keyword argument 'label'
  [255]
  $ log 'extra(label=branch, default)'
  hg: parse error: extra got an invalid argument
  [255]
  $ log 'extra(branch, foo+bar=baz)'
  hg: parse error: extra got an invalid argument
  [255]
  $ log 'extra(unknown=branch)'
  hg: parse error: extra got an unexpected keyword argument 'unknown'
  [255]

  $ try 'foo=bar|baz'
  (keyvalue
    ('symbol', 'foo')
    (or
      (list
        ('symbol', 'bar')
        ('symbol', 'baz'))))
  hg: parse error: can't use a key-value pair in this context
  [255]

 right-hand side should be optimized recursively

  $ try --optimize 'foo=(not public())'
  (keyvalue
    ('symbol', 'foo')
    (group
      (not
        (func
          ('symbol', 'public')
          None))))
  * optimized:
  (keyvalue
    ('symbol', 'foo')
    (func
      ('symbol', '_notpublic')
      None
      any))
  hg: parse error: can't use a key-value pair in this context
  [255]

parsed tree at stages:

  $ hg debugrevspec -p all '()'
  * parsed:
  (group
    None)
  * expanded:
  (group
    None)
  * concatenated:
  (group
    None)
  * analyzed:
  None
  * optimized:
  None
  hg: parse error: missing argument
  [255]

  $ hg debugrevspec --no-optimized -p all '()'
  * parsed:
  (group
    None)
  * expanded:
  (group
    None)
  * concatenated:
  (group
    None)
  * analyzed:
  None
  hg: parse error: missing argument
  [255]

  $ hg debugrevspec -p parsed -p analyzed -p optimized '(0|1)-1'
  * parsed:
  (minus
    (group
      (or
        (list
          ('symbol', '0')
          ('symbol', '1'))))
    ('symbol', '1'))
  * analyzed:
  (and
    (or
      (list
        ('symbol', '0')
        ('symbol', '1'))
      define)
    (not
      ('symbol', '1')
      follow)
    define)
  * optimized:
  (difference
    (func
      ('symbol', '_list')
      ('string', '0\x001')
      define)
    ('symbol', '1')
    define)
  0

  $ hg debugrevspec -p unknown '0'
  abort: invalid stage name: unknown
  [255]

  $ hg debugrevspec -p all --optimize '0'
  abort: cannot use --optimize with --show-stage
  [255]

verify optimized tree:

  $ hg debugrevspec --verify '0|1'

  $ hg debugrevspec --verify -v -p analyzed -p optimized 'r3232() & 2'
  * analyzed:
  (and
    (func
      ('symbol', 'r3232')
      None
      define)
    ('symbol', '2')
    define)
  * optimized:
  (and
    ('symbol', '2')
    (func
      ('symbol', 'r3232')
      None
      define)
    define)
  * analyzed set:
  <baseset [2]>
  * optimized set:
  <baseset [2, 2]>
  --- analyzed
  +++ optimized
   2
  +2
  [1]

  $ hg debugrevspec --no-optimized --verify-optimized '0'
  abort: cannot use --verify-optimized with --no-optimized
  [255]

Test that symbols only get parsed as functions if there's an opening
parenthesis.

  $ hg book only -r 9
  $ log 'only(only)'   # Outer "only" is a function, inner "only" is the bookmark
  8
  9

':y' behaves like '0:y', but can't be rewritten as such since the revision '0'
may be hidden (issue5385)

  $ try -p parsed -p analyzed ':'
  * parsed:
  (rangeall
    None)
  * analyzed:
  (rangeall
    None
    define)
  * set:
  <spanset+ 0:10>
  0
  1
  2
  3
  4
  5
  6
  7
  8
  9
  $ try -p analyzed ':1'
  * analyzed:
  (rangepre
    ('symbol', '1')
    define)
  * set:
  <spanset+ 0:2>
  0
  1
  $ try -p analyzed ':(1|2)'
  * analyzed:
  (rangepre
    (or
      (list
        ('symbol', '1')
        ('symbol', '2'))
      define)
    define)
  * set:
  <spanset+ 0:3>
  0
  1
  2
  $ try -p analyzed ':(1&2)'
  * analyzed:
  (rangepre
    (and
      ('symbol', '1')
      ('symbol', '2')
      define)
    define)
  * set:
  <baseset []>

infix/suffix resolution of ^ operator (issue2884):

 x^:y means (x^):y

  $ try '1^:2'
  (range
    (parentpost
      ('symbol', '1'))
    ('symbol', '2'))
  * set:
  <spanset+ 0:3>
  0
  1
  2

  $ try '1^::2'
  (dagrange
    (parentpost
      ('symbol', '1'))
    ('symbol', '2'))
  * set:
  <baseset+ [0, 1, 2]>
  0
  1
  2

  $ try '9^:'
  (rangepost
    (parentpost
      ('symbol', '9')))
  * set:
  <spanset+ 8:10>
  8
  9

 x^:y should be resolved before omitting group operators

  $ try '1^(:2)'
  (parent
    ('symbol', '1')
    (group
      (rangepre
        ('symbol', '2'))))
  hg: parse error: ^ expects a number 0, 1, or 2
  [255]

 x^:y should be resolved recursively

  $ try 'sort(1^:2)'
  (func
    ('symbol', 'sort')
    (range
      (parentpost
        ('symbol', '1'))
      ('symbol', '2')))
  * set:
  <spanset+ 0:3>
  0
  1
  2

  $ try '(3^:4)^:2'
  (range
    (parentpost
      (group
        (range
          (parentpost
            ('symbol', '3'))
          ('symbol', '4'))))
    ('symbol', '2'))
  * set:
  <spanset+ 0:3>
  0
  1
  2

  $ try '(3^::4)^::2'
  (dagrange
    (parentpost
      (group
        (dagrange
          (parentpost
            ('symbol', '3'))
          ('symbol', '4'))))
    ('symbol', '2'))
  * set:
  <baseset+ [0, 1, 2]>
  0
  1
  2

  $ try '(9^:)^:'
  (rangepost
    (parentpost
      (group
        (rangepost
          (parentpost
            ('symbol', '9'))))))
  * set:
  <spanset+ 4:10>
  4
  5
  6
  7
  8
  9

 x^ in alias should also be resolved

  $ try 'A' --config 'revsetalias.A=1^:2'
  ('symbol', 'A')
  * expanded:
  (range
    (parentpost
      ('symbol', '1'))
    ('symbol', '2'))
  * set:
  <spanset+ 0:3>
  0
  1
  2

  $ try 'A:2' --config 'revsetalias.A=1^'
  (range
    ('symbol', 'A')
    ('symbol', '2'))
  * expanded:
  (range
    (parentpost
      ('symbol', '1'))
    ('symbol', '2'))
  * set:
  <spanset+ 0:3>
  0
  1
  2

 but not beyond the boundary of alias expansion, because the resolution should
 be made at the parsing stage

  $ try '1^A' --config 'revsetalias.A=:2'
  (parent
    ('symbol', '1')
    ('symbol', 'A'))
  * expanded:
  (parent
    ('symbol', '1')
    (rangepre
      ('symbol', '2')))
  hg: parse error: ^ expects a number 0, 1, or 2
  [255]

ancestor can accept 0 or more arguments

  $ log 'ancestor()'
  $ log 'ancestor(1)'
  1
  $ log 'ancestor(4,5)'
  1
  $ log 'ancestor(4,5) and 4'
  $ log 'ancestor(0,0,1,3)'
  0
  $ log 'ancestor(3,1,5,3,5,1)'
  1
  $ log 'ancestor(0,1,3,5)'
  0
  $ log 'ancestor(1,2,3,4,5)'
  1

test ancestors

  $ hg log -G -T '{rev}\n' --config experimental.graphshorten=True
  @  9
  o  8
  | o  7
  | o  6
  |/|
  | o  5
  o |  4
  | o  3
  o |  2
  |/
  o  1
  o  0

  $ log 'ancestors(5)'
  0
  1
  3
  5
  $ log 'ancestor(ancestors(5))'
  0
  $ log '::r3232()'
  0
  1
  2
  3

test ancestors with depth limit

 (depth=0 selects the node itself)

  $ log 'reverse(ancestors(9, depth=0))'
  9

 (interleaved: '4' would be missing if heap queue were higher depth first)

  $ log 'reverse(ancestors(8:9, depth=1))'
  9
  8
  4

 (interleaved: '2' would be missing if heap queue were higher depth first)

  $ log 'reverse(ancestors(7+8, depth=2))'
  8
  7
  6
  5
  4
  2

 (walk example above by separate queries)

  $ log 'reverse(ancestors(8, depth=2)) + reverse(ancestors(7, depth=2))'
  8
  4
  2
  7
  6
  5

 (walk 2nd and 3rd ancestors)

  $ log 'reverse(ancestors(7, depth=3, startdepth=2))'
  5
  4
  3
  2

 (interleaved: '4' would be missing if higher-depth ancestors weren't scanned)

  $ log 'reverse(ancestors(7+8, depth=2, startdepth=2))'
  5
  4
  2

 (note that 'ancestors(x, depth=y, startdepth=z)' does not identical to
 'ancestors(x, depth=y) - ancestors(x, depth=z-1)' because a node may have
 multiple depths)

  $ log 'reverse(ancestors(7+8, depth=2) - ancestors(7+8, depth=1))'
  5
  2

test bad arguments passed to ancestors()

  $ log 'ancestors(., depth=-1)'
  hg: parse error: negative depth
  [255]
  $ log 'ancestors(., depth=foo)'
  hg: parse error: ancestors expects an integer depth
  [255]

test author

  $ log 'author(bob)'
  2
  $ log 'author("re:bob|test")'
  0
  1
  2
  3
  4
  5
  6
  7
  8
  9
  $ log 'author(r"re:\S")'
  0
  1
  2
  3
  4
  5
  6
  7
  8
  9
  $ log 'branch(é)'
  8
  9
  $ log 'branch(a)'
  0
  $ hg log -r 'branch("re:a")' --template '{rev} {branch}\n'
  0 a
  2 a-b-c-
  3 +a+b+c+
  4 -a-b-c-
  5 !a/b/c/
  6 _a_b_c_
  7 .a.b.c.
  $ log 'children(ancestor(4,5))'
  2
  3

  $ log 'children(4)'
  6
  8
  $ log 'children(null)'
  0

  $ log 'closed()'
  $ log 'contains(a)'
  0
  1
  3
  5
  $ log 'contains("../repo/a")'
  0
  1
  3
  5
  $ log 'desc(B)'
  5
  $ hg log -r 'desc(r"re:S?u")' --template "{rev} {desc|firstline}\n"
  5 5 bug
  6 6 issue619
  $ log 'descendants(2 or 3)'
  2
  3
  4
  5
  6
  7
  8
  9
  $ log 'file("b*")'
  1
  4
  $ log 'filelog("b")'
  1
  4
  $ log 'filelog("../repo/b")'
  1
  4
  $ log 'follow()'
  0
  1
  2
  4
  8
  9
  $ log 'grep("issue\d+")'
  6
  $ try 'grep("(")' # invalid regular expression
  (func
    ('symbol', 'grep')
    ('string', '('))
  hg: parse error: invalid match pattern: unbalanced parenthesis
  [255]
  $ try 'grep("\bissue\d+")'
  (func
    ('symbol', 'grep')
    ('string', '\x08issue\\d+'))
  * set:
  <filteredset
    <fullreposet+ 0:10>,
    <grep '\x08issue\\d+'>>
  $ try 'grep(r"\bissue\d+")'
  (func
    ('symbol', 'grep')
    ('string', '\\bissue\\d+'))
  * set:
  <filteredset
    <fullreposet+ 0:10>,
    <grep '\\bissue\\d+'>>
  6
  $ try 'grep(r"\")'
  hg: parse error at 7: unterminated string
  [255]
  $ log 'head()'
  0
  1
  2
  3
  4
  5
  6
  7
  9
  $ log 'heads(6::)'
  7
  $ log 'keyword(issue)'
  6
  $ log 'keyword("test a")'

Test first (=limit) and last

  $ log 'limit(head(), 1)'
  0
  $ log 'limit(author("re:bob|test"), 3, 5)'
  5
  6
  7
  $ log 'limit(author("re:bob|test"), offset=6)'
  6
  $ log 'limit(author("re:bob|test"), offset=10)'
  $ log 'limit(all(), 1, -1)'
  hg: parse error: negative offset
  [255]
  $ log 'limit(all(), -1)'
  hg: parse error: negative number to select
  [255]
  $ log 'limit(all(), 0)'

  $ log 'last(all(), -1)'
  hg: parse error: negative number to select
  [255]
  $ log 'last(all(), 0)'
  $ log 'last(all(), 1)'
  9
  $ log 'last(all(), 2)'
  8
  9

Test smartset.slice() by first/last()

 (using unoptimized set, filteredset as example)

  $ hg debugrevspec --no-show-revs -s '0:7 & branch("re:")'
  * set:
  <filteredset
    <spanset+ 0:8>,
    <branch 're:'>>
  $ log 'limit(0:7 & branch("re:"), 3, 4)'
  4
  5
  6
  $ log 'limit(7:0 & branch("re:"), 3, 4)'
  3
  2
  1
  $ log 'last(0:7 & branch("re:"), 2)'
  6
  7

 (using baseset)

  $ hg debugrevspec --no-show-revs -s 0+1+2+3+4+5+6+7
  * set:
  <baseset [0, 1, 2, 3, 4, 5, 6, 7]>
  $ hg debugrevspec --no-show-revs -s 0::7
  * set:
  <baseset+ [0, 1, 2, 3, 4, 5, 6, 7]>
  $ log 'limit(0+1+2+3+4+5+6+7, 3, 4)'
  4
  5
  6
  $ log 'limit(sort(0::7, rev), 3, 4)'
  4
  5
  6
  $ log 'limit(sort(0::7, -rev), 3, 4)'
  3
  2
  1
  $ log 'last(sort(0::7, rev), 2)'
  6
  7
  $ hg debugrevspec -s 'limit(sort(0::7, rev), 3, 6)'
  * set:
  <baseset+ [6, 7]>
  6
  7
  $ hg debugrevspec -s 'limit(sort(0::7, rev), 3, 9)'
  * set:
  <baseset+ []>
  $ hg debugrevspec -s 'limit(sort(0::7, -rev), 3, 6)'
  * set:
  <baseset- [0, 1]>
  1
  0
  $ hg debugrevspec -s 'limit(sort(0::7, -rev), 3, 9)'
  * set:
  <baseset- []>
  $ hg debugrevspec -s 'limit(0::7, 0)'
  * set:
  <baseset+ []>

 (using spanset)

  $ hg debugrevspec --no-show-revs -s 0:7
  * set:
  <spanset+ 0:8>
  $ log 'limit(0:7, 3, 4)'
  4
  5
  6
  $ log 'limit(7:0, 3, 4)'
  3
  2
  1
  $ log 'limit(0:7, 3, 6)'
  6
  7
  $ log 'limit(7:0, 3, 6)'
  1
  0
  $ log 'last(0:7, 2)'
  6
  7
  $ hg debugrevspec -s 'limit(0:7, 3, 6)'
  * set:
  <spanset+ 6:8>
  6
  7
  $ hg debugrevspec -s 'limit(0:7, 3, 9)'
  * set:
  <spanset+ 8:8>
  $ hg debugrevspec -s 'limit(7:0, 3, 6)'
  * set:
  <spanset- 0:2>
  1
  0
  $ hg debugrevspec -s 'limit(7:0, 3, 9)'
  * set:
  <spanset- 0:0>
  $ hg debugrevspec -s 'limit(0:7, 0)'
  * set:
  <spanset+ 0:0>

Test order of first/last revisions

  $ hg debugrevspec -s 'first(4:0, 3) & 3:'
  * set:
  <filteredset
    <spanset- 2:5>,
    <spanset+ 3:10>>
  4
  3

  $ hg debugrevspec -s '3: & first(4:0, 3)'
  * set:
  <filteredset
    <spanset+ 3:10>,
    <spanset- 2:5>>
  3
  4

  $ hg debugrevspec -s 'last(4:0, 3) & :1'
  * set:
  <filteredset
    <spanset- 0:3>,
    <spanset+ 0:2>>
  1
  0

  $ hg debugrevspec -s ':1 & last(4:0, 3)'
  * set:
  <filteredset
    <spanset+ 0:2>,
    <spanset+ 0:3>>
  0
  1

Test matching

  $ log 'matching(6)'
  6
  $ log 'matching(6:7, "phase parents user date branch summary files description substate")'
  6
  7

Testing min and max

max: simple

  $ log 'max(contains(a))'
  5

max: simple on unordered set)

  $ log 'max((4+0+2+5+7) and contains(a))'
  5

max: no result

  $ log 'max(contains(stringthatdoesnotappearanywhere))'

max: no result on unordered set

  $ log 'max((4+0+2+5+7) and contains(stringthatdoesnotappearanywhere))'

min: simple

  $ log 'min(contains(a))'
  0

min: simple on unordered set

  $ log 'min((4+0+2+5+7) and contains(a))'
  0

min: empty

  $ log 'min(contains(stringthatdoesnotappearanywhere))'

min: empty on unordered set

  $ log 'min((4+0+2+5+7) and contains(stringthatdoesnotappearanywhere))'


  $ log 'merge()'
  6
  $ log 'branchpoint()'
  1
  4
  $ log 'modifies(b)'
  4
  $ log 'modifies("path:b")'
  4
  $ log 'modifies("*")'
  4
  6
  $ log 'modifies("set:modified()")'
  4
  $ log 'id(5)'
  2
  $ log 'only(9)'
  8
  9
  $ log 'only(8)'
  8
  $ log 'only(9, 5)'
  2
  4
  8
  9
  $ log 'only(7 + 9, 5 + 2)'
  4
  6
  7
  8
  9

Test empty set input
  $ log 'only(p2())'
  $ log 'only(p1(), p2())'
  0
  1
  2
  4
  8
  9

Test '%' operator

  $ log '9%'
  8
  9
  $ log '9%5'
  2
  4
  8
  9
  $ log '(7 + 9)%(5 + 2)'
  4
  6
  7
  8
  9

Test operand of '%' is optimized recursively (issue4670)

  $ try --optimize '8:9-8%'
  (onlypost
    (minus
      (range
        ('symbol', '8')
        ('symbol', '9'))
      ('symbol', '8')))
  * optimized:
  (func
    ('symbol', 'only')
    (difference
      (range
        ('symbol', '8')
        ('symbol', '9')
        define)
      ('symbol', '8')
      define)
    define)
  * set:
  <baseset+ [8, 9]>
  8
  9
  $ try --optimize '(9)%(5)'
  (only
    (group
      ('symbol', '9'))
    (group
      ('symbol', '5')))
  * optimized:
  (func
    ('symbol', 'only')
    (list
      ('symbol', '9')
      ('symbol', '5'))
    define)
  * set:
  <baseset+ [2, 4, 8, 9]>
  2
  4
  8
  9

Test the order of operations

  $ log '7 + 9%5 + 2'
  7
  2
  4
  8
  9

Test explicit numeric revision
  $ log 'rev(-2)'
  $ log 'rev(-1)'
  -1
  $ log 'rev(0)'
  0
  $ log 'rev(9)'
  9
  $ log 'rev(10)'
  $ log 'rev(tip)'
  hg: parse error: rev expects a number
  [255]

Test hexadecimal revision
  $ log 'id(2)'
  abort: 00changelog.i@2: ambiguous identifier!
  [255]
  $ log 'id(23268)'
  4
  $ log 'id(2785f51eece)'
  0
  $ log 'id(d5d0dcbdc4d9ff5dbb2d336f32f0bb561c1a532c)'
  8
  $ log 'id(d5d0dcbdc4a)'
  $ log 'id(d5d0dcbdc4w)'
  $ log 'id(d5d0dcbdc4d9ff5dbb2d336f32f0bb561c1a532d)'
  $ log 'id(d5d0dcbdc4d9ff5dbb2d336f32f0bb561c1a532q)'
  $ log 'id(1.0)'
  $ log 'id(xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx)'

Test null revision
  $ log '(null)'
  -1
  $ log '(null:0)'
  -1
  0
  $ log '(0:null)'
  0
  -1
  $ log 'null::0'
  -1
  0
  $ log 'null:tip - 0:'
  -1
  $ log 'null: and null::' | head -1
  -1
  $ log 'null: or 0:' | head -2
  -1
  0
  $ log 'ancestors(null)'
  -1
  $ log 'reverse(null:)' | tail -2
  0
  -1
  $ log 'first(null:)'
  -1
  $ log 'min(null:)'
BROKEN: should be '-1'
  $ log 'tip:null and all()' | tail -2
  1
  0

Test working-directory revision
  $ hg debugrevspec 'wdir()'
  2147483647
  $ hg debugrevspec 'wdir()^'
  9
  $ hg up 7
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg debugrevspec 'wdir()^'
  7
  $ hg debugrevspec 'wdir()^0'
  2147483647
  $ hg debugrevspec 'wdir()~3'
  5
  $ hg debugrevspec 'ancestors(wdir())'
  0
  1
  2
  3
  4
  5
  6
  7
  2147483647
  $ hg debugrevspec 'wdir()~0'
  2147483647
  $ hg debugrevspec 'p1(wdir())'
  7
  $ hg debugrevspec 'p2(wdir())'
  $ hg debugrevspec 'parents(wdir())'
  7
  $ hg debugrevspec 'wdir()^1'
  7
  $ hg debugrevspec 'wdir()^2'
  $ hg debugrevspec 'wdir()^3'
  hg: parse error: ^ expects a number 0, 1, or 2
  [255]
For tests consistency
  $ hg up 9
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg debugrevspec 'tip or wdir()'
  9
  2147483647
  $ hg debugrevspec '0:tip and wdir()'
  $ log '0:wdir()' | tail -3
  8
  9
  2147483647
  $ log 'wdir():0' | head -3
  2147483647
  9
  8
  $ log 'wdir():wdir()'
  2147483647
  $ log '(all() + wdir()) & min(. + wdir())'
  9
  $ log '(all() + wdir()) & max(. + wdir())'
  2147483647
  $ log 'first(wdir() + .)'
  2147483647
  $ log 'last(. + wdir())'
  2147483647

Test working-directory integer revision and node id
(BUG: '0:wdir()' is still needed to populate wdir revision)

  $ hg debugrevspec '0:wdir() & 2147483647'
  2147483647
  $ hg debugrevspec '0:wdir() & rev(2147483647)'
  2147483647
  $ hg debugrevspec '0:wdir() & ffffffffffffffffffffffffffffffffffffffff'
  2147483647
  $ hg debugrevspec '0:wdir() & ffffffffffff'
  2147483647
  $ hg debugrevspec '0:wdir() & id(ffffffffffffffffffffffffffffffffffffffff)'
  2147483647
  $ hg debugrevspec '0:wdir() & id(ffffffffffff)'
  2147483647

  $ cd ..

Test short 'ff...' hash collision
(BUG: '0:wdir()' is still needed to populate wdir revision)

  $ hg init wdir-hashcollision
  $ cd wdir-hashcollision
  $ cat <<EOF >> .hg/hgrc
  > [experimental]
  > evolution = createmarkers
  > EOF
  $ echo 0 > a
  $ hg ci -qAm 0
  $ for i in 2463 2961 6726 78127; do
  >   hg up -q 0
  >   echo $i > a
  >   hg ci -qm $i
  > done
  $ hg up -q null
  $ hg log -r '0:wdir()' -T '{rev}:{node} {shortest(node, 3)}\n'
  0:b4e73ffab476aa0ee32ed81ca51e07169844bc6a b4e
  1:fffbae3886c8fbb2114296380d276fd37715d571 fffba
  2:fffb6093b00943f91034b9bdad069402c834e572 fffb6
  3:fff48a9b9de34a4d64120c29548214c67980ade3 fff4
  4:ffff85cff0ff78504fcdc3c0bc10de0c65379249 ffff8
  2147483647:ffffffffffffffffffffffffffffffffffffffff fffff
  $ hg debugobsolete fffbae3886c8fbb2114296380d276fd37715d571

  $ hg debugrevspec '0:wdir() & fff'
  abort: 00changelog.i@fff: ambiguous identifier!
  [255]
  $ hg debugrevspec '0:wdir() & ffff'
  abort: 00changelog.i@ffff: ambiguous identifier!
  [255]
  $ hg debugrevspec '0:wdir() & fffb'
  abort: 00changelog.i@fffb: ambiguous identifier!
  [255]
BROKEN should be '2' (node lookup uses unfiltered repo since dc25ed84bee8)
  $ hg debugrevspec '0:wdir() & id(fffb)'
  2
  $ hg debugrevspec '0:wdir() & ffff8'
  4
  $ hg debugrevspec '0:wdir() & fffff'
  2147483647

  $ cd ..

Test branch() with wdir()

  $ cd repo

  $ log '0:wdir() & branch("literal:é")'
  8
  9
  2147483647
  $ log '0:wdir() & branch("re:é")'
  8
  9
  2147483647
  $ log '0:wdir() & branch("re:^a")'
  0
  2
  $ log '0:wdir() & branch(8)'
  8
  9
  2147483647

branch(wdir()) returns all revisions belonging to the working branch. The wdir
itself isn't returned unless it is explicitly populated.

  $ log 'branch(wdir())'
  8
  9
  $ log '0:wdir() & branch(wdir())'
  8
  9
  2147483647

  $ log 'outgoing()'
  8
  9
  $ log 'outgoing("../remote1")'
  8
  9
  $ log 'outgoing("../remote2")'
  3
  5
  6
  7
  9
  $ log 'p1(merge())'
  5
  $ log 'p2(merge())'
  4
  $ log 'parents(merge())'
  4
  5
  $ log 'p1(branchpoint())'
  0
  2
  $ log 'p2(branchpoint())'
  $ log 'parents(branchpoint())'
  0
  2
  $ log 'removes(a)'
  2
  6
  $ log 'roots(all())'
  0
  $ log 'reverse(2 or 3 or 4 or 5)'
  5
  4
  3
  2
  $ log 'reverse(all())'
  9
  8
  7
  6
  5
  4
  3
  2
  1
  0
  $ log 'reverse(all()) & filelog(b)'
  4
  1
  $ log 'rev(5)'
  5
  $ log 'sort(limit(reverse(all()), 3))'
  7
  8
  9
  $ log 'sort(2 or 3 or 4 or 5, date)'
  2
  3
  5
  4
  $ log 'tagged()'
  6
  $ log 'tag()'
  6
  $ log 'tag(1.0)'
  6
  $ log 'tag(tip)'
  9

Test order of revisions in compound expression
----------------------------------------------

The general rule is that only the outermost (= leftmost) predicate can
enforce its ordering requirement. The other predicates should take the
ordering defined by it.

 'A & B' should follow the order of 'A':

  $ log '2:0 & 0::2'
  2
  1
  0

 'head()' combines sets in right order:

  $ log '2:0 & head()'
  2
  1
  0

 'x:y' takes ordering parameter into account:

  $ try -p optimized '3:0 & 0:3 & not 2:1'
  * optimized:
  (difference
    (and
      (range
        ('symbol', '3')
        ('symbol', '0')
        define)
      (range
        ('symbol', '0')
        ('symbol', '3')
        follow)
      define)
    (range
      ('symbol', '2')
      ('symbol', '1')
      any)
    define)
  * set:
  <filteredset
    <filteredset
      <spanset- 0:4>,
      <spanset+ 0:4>>,
    <not
      <spanset+ 1:3>>>
  3
  0

 'a + b', which is optimized to '_list(a b)', should take the ordering of
 the left expression:

  $ try --optimize '2:0 & (0 + 1 + 2)'
  (and
    (range
      ('symbol', '2')
      ('symbol', '0'))
    (group
      (or
        (list
          ('symbol', '0')
          ('symbol', '1')
          ('symbol', '2')))))
  * optimized:
  (and
    (range
      ('symbol', '2')
      ('symbol', '0')
      define)
    (func
      ('symbol', '_list')
      ('string', '0\x001\x002')
      follow)
    define)
  * set:
  <filteredset
    <spanset- 0:3>,
    <baseset [0, 1, 2]>>
  2
  1
  0

 'A + B' should take the ordering of the left expression:

  $ try --optimize '2:0 & (0:1 + 2)'
  (and
    (range
      ('symbol', '2')
      ('symbol', '0'))
    (group
      (or
        (list
          (range
            ('symbol', '0')
            ('symbol', '1'))
          ('symbol', '2')))))
  * optimized:
  (and
    (range
      ('symbol', '2')
      ('symbol', '0')
      define)
    (or
      (list
        ('symbol', '2')
        (range
          ('symbol', '0')
          ('symbol', '1')
          follow))
      follow)
    define)
  * set:
  <filteredset
    <spanset- 0:3>,
    <addset
      <baseset [2]>,
      <spanset+ 0:2>>>
  2
  1
  0

 '_intlist(a b)' should behave like 'a + b':

  $ trylist --optimize '2:0 & %ld' 0 1 2
  (and
    (range
      ('symbol', '2')
      ('symbol', '0'))
    (func
      ('symbol', '_intlist')
      ('string', '0\x001\x002')))
  * optimized:
  (and
    (func
      ('symbol', '_intlist')
      ('string', '0\x001\x002')
      follow)
    (range
      ('symbol', '2')
      ('symbol', '0')
      define)
    define)
  * set:
  <filteredset
    <spanset- 0:3>,
    <baseset+ [0, 1, 2]>>
  2
  1
  0

  $ trylist --optimize '%ld & 2:0' 0 2 1
  (and
    (func
      ('symbol', '_intlist')
      ('string', '0\x002\x001'))
    (range
      ('symbol', '2')
      ('symbol', '0')))
  * optimized:
  (and
    (func
      ('symbol', '_intlist')
      ('string', '0\x002\x001')
      define)
    (range
      ('symbol', '2')
      ('symbol', '0')
      follow)
    define)
  * set:
  <filteredset
    <baseset [0, 2, 1]>,
    <spanset- 0:3>>
  0
  2
  1

 '_hexlist(a b)' should behave like 'a + b':

  $ trylist --optimize --bin '2:0 & %ln' `hg log -T '{node} ' -r0:2`
  (and
    (range
      ('symbol', '2')
      ('symbol', '0'))
    (func
      ('symbol', '_hexlist')
      ('string', '*'))) (glob)
  * optimized:
  (and
    (range
      ('symbol', '2')
      ('symbol', '0')
      define)
    (func
      ('symbol', '_hexlist')
      ('string', '*') (glob)
      follow)
    define)
  * set:
  <filteredset
    <spanset- 0:3>,
    <baseset [0, 1, 2]>>
  2
  1
  0

  $ trylist --optimize --bin '%ln & 2:0' `hg log -T '{node} ' -r0+2+1`
  (and
    (func
      ('symbol', '_hexlist')
      ('string', '*')) (glob)
    (range
      ('symbol', '2')
      ('symbol', '0')))
  * optimized:
  (and
    (range
      ('symbol', '2')
      ('symbol', '0')
      follow)
    (func
      ('symbol', '_hexlist')
      ('string', '*') (glob)
      define)
    define)
  * set:
  <baseset [0, 2, 1]>
  0
  2
  1

 '_list' should not go through the slow follow-order path if order doesn't
 matter:

  $ try -p optimized '2:0 & not (0 + 1)'
  * optimized:
  (difference
    (range
      ('symbol', '2')
      ('symbol', '0')
      define)
    (func
      ('symbol', '_list')
      ('string', '0\x001')
      any)
    define)
  * set:
  <filteredset
    <spanset- 0:3>,
    <not
      <baseset [0, 1]>>>
  2

  $ try -p optimized '2:0 & not (0:2 & (0 + 1))'
  * optimized:
  (difference
    (range
      ('symbol', '2')
      ('symbol', '0')
      define)
    (and
      (range
        ('symbol', '0')
        ('symbol', '2')
        any)
      (func
        ('symbol', '_list')
        ('string', '0\x001')
        any)
      any)
    define)
  * set:
  <filteredset
    <spanset- 0:3>,
    <not
      <baseset [0, 1]>>>
  2

 because 'present()' does nothing other than suppressing an error, the
 ordering requirement should be forwarded to the nested expression

  $ try -p optimized 'present(2 + 0 + 1)'
  * optimized:
  (func
    ('symbol', 'present')
    (func
      ('symbol', '_list')
      ('string', '2\x000\x001')
      define)
    define)
  * set:
  <baseset [2, 0, 1]>
  2
  0
  1

  $ try --optimize '2:0 & present(0 + 1 + 2)'
  (and
    (range
      ('symbol', '2')
      ('symbol', '0'))
    (func
      ('symbol', 'present')
      (or
        (list
          ('symbol', '0')
          ('symbol', '1')
          ('symbol', '2')))))
  * optimized:
  (and
    (range
      ('symbol', '2')
      ('symbol', '0')
      define)
    (func
      ('symbol', 'present')
      (func
        ('symbol', '_list')
        ('string', '0\x001\x002')
        follow)
      follow)
    define)
  * set:
  <filteredset
    <spanset- 0:3>,
    <baseset [0, 1, 2]>>
  2
  1
  0

 'reverse()' should take effect only if it is the outermost expression:

  $ try --optimize '0:2 & reverse(all())'
  (and
    (range
      ('symbol', '0')
      ('symbol', '2'))
    (func
      ('symbol', 'reverse')
      (func
        ('symbol', 'all')
        None)))
  * optimized:
  (and
    (range
      ('symbol', '0')
      ('symbol', '2')
      define)
    (func
      ('symbol', 'reverse')
      (func
        ('symbol', 'all')
        None
        define)
      follow)
    define)
  * set:
  <filteredset
    <spanset+ 0:3>,
    <spanset+ 0:10>>
  0
  1
  2

 'sort()' should take effect only if it is the outermost expression:

  $ try --optimize '0:2 & sort(all(), -rev)'
  (and
    (range
      ('symbol', '0')
      ('symbol', '2'))
    (func
      ('symbol', 'sort')
      (list
        (func
          ('symbol', 'all')
          None)
        (negate
          ('symbol', 'rev')))))
  * optimized:
  (and
    (range
      ('symbol', '0')
      ('symbol', '2')
      define)
    (func
      ('symbol', 'sort')
      (list
        (func
          ('symbol', 'all')
          None
          define)
        ('string', '-rev'))
      follow)
    define)
  * set:
  <filteredset
    <spanset+ 0:3>,
    <spanset+ 0:10>>
  0
  1
  2

 invalid argument passed to noop sort():

  $ log '0:2 & sort()'
  hg: parse error: sort requires one or two arguments
  [255]
  $ log '0:2 & sort(all(), -invalid)'
  hg: parse error: unknown sort key '-invalid'
  [255]

 for 'A & f(B)', 'B' should not be affected by the order of 'A':

  $ try --optimize '2:0 & first(1 + 0 + 2)'
  (and
    (range
      ('symbol', '2')
      ('symbol', '0'))
    (func
      ('symbol', 'first')
      (or
        (list
          ('symbol', '1')
          ('symbol', '0')
          ('symbol', '2')))))
  * optimized:
  (and
    (range
      ('symbol', '2')
      ('symbol', '0')
      define)
    (func
      ('symbol', 'first')
      (func
        ('symbol', '_list')
        ('string', '1\x000\x002')
        define)
      follow)
    define)
  * set:
  <filteredset
    <baseset [1]>,
    <spanset- 0:3>>
  1

  $ try --optimize '2:0 & not last(0 + 2 + 1)'
  (and
    (range
      ('symbol', '2')
      ('symbol', '0'))
    (not
      (func
        ('symbol', 'last')
        (or
          (list
            ('symbol', '0')
            ('symbol', '2')
            ('symbol', '1'))))))
  * optimized:
  (difference
    (range
      ('symbol', '2')
      ('symbol', '0')
      define)
    (func
      ('symbol', 'last')
      (func
        ('symbol', '_list')
        ('string', '0\x002\x001')
        define)
      any)
    define)
  * set:
  <filteredset
    <spanset- 0:3>,
    <not
      <baseset [1]>>>
  2
  0

 for 'A & (op)(B)', 'B' should not be affected by the order of 'A':

  $ try --optimize '2:0 & (1 + 0 + 2):(0 + 2 + 1)'
  (and
    (range
      ('symbol', '2')
      ('symbol', '0'))
    (range
      (group
        (or
          (list
            ('symbol', '1')
            ('symbol', '0')
            ('symbol', '2'))))
      (group
        (or
          (list
            ('symbol', '0')
            ('symbol', '2')
            ('symbol', '1'))))))
  * optimized:
  (and
    (range
      ('symbol', '2')
      ('symbol', '0')
      define)
    (range
      (func
        ('symbol', '_list')
        ('string', '1\x000\x002')
        define)
      (func
        ('symbol', '_list')
        ('string', '0\x002\x001')
        define)
      follow)
    define)
  * set:
  <filteredset
    <spanset- 0:3>,
    <baseset [1]>>
  1

 'A & B' can be rewritten as 'B & A' by weight, but that's fine as long as
 the ordering rule is determined before the rewrite; in this example,
 'B' follows the order of the initial set, which is the same order as 'A'
 since 'A' also follows the order:

  $ try --optimize 'contains("glob:*") & (2 + 0 + 1)'
  (and
    (func
      ('symbol', 'contains')
      ('string', 'glob:*'))
    (group
      (or
        (list
          ('symbol', '2')
          ('symbol', '0')
          ('symbol', '1')))))
  * optimized:
  (and
    (func
      ('symbol', '_list')
      ('string', '2\x000\x001')
      follow)
    (func
      ('symbol', 'contains')
      ('string', 'glob:*')
      define)
    define)
  * set:
  <filteredset
    <baseset+ [0, 1, 2]>,
    <contains 'glob:*'>>
  0
  1
  2

 and in this example, 'A & B' is rewritten as 'B & A', but 'A' overrides
 the order appropriately:

  $ try --optimize 'reverse(contains("glob:*")) & (0 + 2 + 1)'
  (and
    (func
      ('symbol', 'reverse')
      (func
        ('symbol', 'contains')
        ('string', 'glob:*')))
    (group
      (or
        (list
          ('symbol', '0')
          ('symbol', '2')
          ('symbol', '1')))))
  * optimized:
  (and
    (func
      ('symbol', '_list')
      ('string', '0\x002\x001')
      follow)
    (func
      ('symbol', 'reverse')
      (func
        ('symbol', 'contains')
        ('string', 'glob:*')
        define)
      define)
    define)
  * set:
  <filteredset
    <baseset- [0, 1, 2]>,
    <contains 'glob:*'>>
  2
  1
  0

 'A + B' can be rewritten to 'B + A' by weight only when the order doesn't
 matter (e.g. 'X & (A + B)' can be 'X & (B + A)', but '(A + B) & X' can't):

  $ try -p optimized '0:2 & (reverse(contains("a")) + 2)'
  * optimized:
  (and
    (range
      ('symbol', '0')
      ('symbol', '2')
      define)
    (or
      (list
        ('symbol', '2')
        (func
          ('symbol', 'reverse')
          (func
            ('symbol', 'contains')
            ('string', 'a')
            define)
          follow))
      follow)
    define)
  * set:
  <filteredset
    <spanset+ 0:3>,
    <addset
      <baseset [2]>,
      <filteredset
        <fullreposet+ 0:10>,
        <contains 'a'>>>>
  0
  1
  2

  $ try -p optimized '(reverse(contains("a")) + 2) & 0:2'
  * optimized:
  (and
    (range
      ('symbol', '0')
      ('symbol', '2')
      follow)
    (or
      (list
        (func
          ('symbol', 'reverse')
          (func
            ('symbol', 'contains')
            ('string', 'a')
            define)
          define)
        ('symbol', '2'))
      define)
    define)
  * set:
  <addset
    <filteredset
      <spanset- 0:3>,
      <contains 'a'>>,
    <baseset [2]>>
  1
  0
  2

test sort revset
--------------------------------------------

test when adding two unordered revsets

  $ log 'sort(keyword(issue) or modifies(b))'
  4
  6

test when sorting a reversed collection in the same way it is

  $ log 'sort(reverse(all()), -rev)'
  9
  8
  7
  6
  5
  4
  3
  2
  1
  0

test when sorting a reversed collection

  $ log 'sort(reverse(all()), rev)'
  0
  1
  2
  3
  4
  5
  6
  7
  8
  9


test sorting two sorted collections in different orders

  $ log 'sort(outgoing() or reverse(removes(a)), rev)'
  2
  6
  8
  9

test sorting two sorted collections in different orders backwards

  $ log 'sort(outgoing() or reverse(removes(a)), -rev)'
  9
  8
  6
  2

test empty sort key which is noop

  $ log 'sort(0 + 2 + 1, "")'
  0
  2
  1

test invalid sort keys

  $ log 'sort(all(), -invalid)'
  hg: parse error: unknown sort key '-invalid'
  [255]

  $ cd ..

test sorting by multiple keys including variable-length strings

  $ hg init sorting
  $ cd sorting
  $ cat <<EOF >> .hg/hgrc
  > [ui]
  > logtemplate = '{rev} {branch|p5}{desc|p5}{author|p5}{date|hgdate}\n'
  > [templatealias]
  > p5(s) = pad(s, 5)
  > EOF
  $ hg branch -qf b12
  $ hg ci -m m111 -u u112 -d '111 10800'
  $ hg branch -qf b11
  $ hg ci -m m12 -u u111 -d '112 7200'
  $ hg branch -qf b111
  $ hg ci -m m11 -u u12 -d '111 3600'
  $ hg branch -qf b112
  $ hg ci -m m111 -u u11 -d '120 0'
  $ hg branch -qf b111
  $ hg ci -m m112 -u u111 -d '110 14400'
  created new head

 compare revisions (has fast path):

  $ hg log -r 'sort(all(), rev)'
  0 b12  m111 u112 111 10800
  1 b11  m12  u111 112 7200
  2 b111 m11  u12  111 3600
  3 b112 m111 u11  120 0
  4 b111 m112 u111 110 14400

  $ hg log -r 'sort(all(), -rev)'
  4 b111 m112 u111 110 14400
  3 b112 m111 u11  120 0
  2 b111 m11  u12  111 3600
  1 b11  m12  u111 112 7200
  0 b12  m111 u112 111 10800

 compare variable-length strings (issue5218):

  $ hg log -r 'sort(all(), branch)'
  1 b11  m12  u111 112 7200
  2 b111 m11  u12  111 3600
  4 b111 m112 u111 110 14400
  3 b112 m111 u11  120 0
  0 b12  m111 u112 111 10800

  $ hg log -r 'sort(all(), -branch)'
  0 b12  m111 u112 111 10800
  3 b112 m111 u11  120 0
  2 b111 m11  u12  111 3600
  4 b111 m112 u111 110 14400
  1 b11  m12  u111 112 7200

  $ hg log -r 'sort(all(), desc)'
  2 b111 m11  u12  111 3600
  0 b12  m111 u112 111 10800
  3 b112 m111 u11  120 0
  4 b111 m112 u111 110 14400
  1 b11  m12  u111 112 7200

  $ hg log -r 'sort(all(), -desc)'
  1 b11  m12  u111 112 7200
  4 b111 m112 u111 110 14400
  0 b12  m111 u112 111 10800
  3 b112 m111 u11  120 0
  2 b111 m11  u12  111 3600

  $ hg log -r 'sort(all(), user)'
  3 b112 m111 u11  120 0
  1 b11  m12  u111 112 7200
  4 b111 m112 u111 110 14400
  0 b12  m111 u112 111 10800
  2 b111 m11  u12  111 3600

  $ hg log -r 'sort(all(), -user)'
  2 b111 m11  u12  111 3600
  0 b12  m111 u112 111 10800
  1 b11  m12  u111 112 7200
  4 b111 m112 u111 110 14400
  3 b112 m111 u11  120 0

 compare dates (tz offset should have no effect):

  $ hg log -r 'sort(all(), date)'
  4 b111 m112 u111 110 14400
  0 b12  m111 u112 111 10800
  2 b111 m11  u12  111 3600
  1 b11  m12  u111 112 7200
  3 b112 m111 u11  120 0

  $ hg log -r 'sort(all(), -date)'
  3 b112 m111 u11  120 0
  1 b11  m12  u111 112 7200
  0 b12  m111 u112 111 10800
  2 b111 m11  u12  111 3600
  4 b111 m112 u111 110 14400

 be aware that 'sort(x, -k)' is not exactly the same as 'reverse(sort(x, k))'
 because '-k' reverses the comparison, not the list itself:

  $ hg log -r 'sort(0 + 2, date)'
  0 b12  m111 u112 111 10800
  2 b111 m11  u12  111 3600

  $ hg log -r 'sort(0 + 2, -date)'
  0 b12  m111 u112 111 10800
  2 b111 m11  u12  111 3600

  $ hg log -r 'reverse(sort(0 + 2, date))'
  2 b111 m11  u12  111 3600
  0 b12  m111 u112 111 10800

 sort by multiple keys:

  $ hg log -r 'sort(all(), "branch -rev")'
  1 b11  m12  u111 112 7200
  4 b111 m112 u111 110 14400
  2 b111 m11  u12  111 3600
  3 b112 m111 u11  120 0
  0 b12  m111 u112 111 10800

  $ hg log -r 'sort(all(), "-desc -date")'
  1 b11  m12  u111 112 7200
  4 b111 m112 u111 110 14400
  3 b112 m111 u11  120 0
  0 b12  m111 u112 111 10800
  2 b111 m11  u12  111 3600

  $ hg log -r 'sort(all(), "user -branch date rev")'
  3 b112 m111 u11  120 0
  4 b111 m112 u111 110 14400
  1 b11  m12  u111 112 7200
  0 b12  m111 u112 111 10800
  2 b111 m11  u12  111 3600

 toposort prioritises graph branches

  $ hg up 2
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ touch a
  $ hg addremove
  adding a
  $ hg ci -m 't1' -u 'tu' -d '130 0'
  created new head
  $ echo 'a' >> a
  $ hg ci -m 't2' -u 'tu' -d '130 0'
  $ hg book book1
  $ hg up 4
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (leaving bookmark book1)
  $ touch a
  $ hg addremove
  adding a
  $ hg ci -m 't3' -u 'tu' -d '130 0'

  $ hg log -r 'sort(all(), topo)'
  7 b111 t3   tu   130 0
  4 b111 m112 u111 110 14400
  3 b112 m111 u11  120 0
  6 b111 t2   tu   130 0
  5 b111 t1   tu   130 0
  2 b111 m11  u12  111 3600
  1 b11  m12  u111 112 7200
  0 b12  m111 u112 111 10800

  $ hg log -r 'sort(all(), -topo)'
  0 b12  m111 u112 111 10800
  1 b11  m12  u111 112 7200
  2 b111 m11  u12  111 3600
  5 b111 t1   tu   130 0
  6 b111 t2   tu   130 0
  3 b112 m111 u11  120 0
  4 b111 m112 u111 110 14400
  7 b111 t3   tu   130 0

  $ hg log -r 'sort(all(), topo, topo.firstbranch=book1)'
  6 b111 t2   tu   130 0
  5 b111 t1   tu   130 0
  7 b111 t3   tu   130 0
  4 b111 m112 u111 110 14400
  3 b112 m111 u11  120 0
  2 b111 m11  u12  111 3600
  1 b11  m12  u111 112 7200
  0 b12  m111 u112 111 10800

topographical sorting can't be combined with other sort keys, and you can't
use the topo.firstbranch option when topo sort is not active:

  $ hg log -r 'sort(all(), "topo user")'
  hg: parse error: topo sort order cannot be combined with other sort keys
  [255]

  $ hg log -r 'sort(all(), user, topo.firstbranch=book1)'
  hg: parse error: topo.firstbranch can only be used when using the topo sort key
  [255]

topo.firstbranch should accept any kind of expressions:

  $ hg log -r 'sort(0, topo, topo.firstbranch=(book1))'
  0 b12  m111 u112 111 10800

  $ cd ..
  $ cd repo

test subtracting something from an addset

  $ log '(outgoing() or removes(a)) - removes(a)'
  8
  9

test intersecting something with an addset

  $ log 'parents(outgoing() or removes(a))'
  1
  4
  5
  8

test that `or` operation combines elements in the right order:

  $ log '3:4 or 2:5'
  3
  4
  2
  5
  $ log '3:4 or 5:2'
  3
  4
  5
  2
  $ log 'sort(3:4 or 2:5)'
  2
  3
  4
  5
  $ log 'sort(3:4 or 5:2)'
  2
  3
  4
  5

test that more than one `-r`s are combined in the right order and deduplicated:

  $ hg log -T '{rev}\n' -r 3 -r 3 -r 4 -r 5:2 -r 'ancestors(4)'
  3
  4
  5
  2
  0
  1

test that `or` operation skips duplicated revisions from right-hand side

  $ try 'reverse(1::5) or ancestors(4)'
  (or
    (list
      (func
        ('symbol', 'reverse')
        (dagrange
          ('symbol', '1')
          ('symbol', '5')))
      (func
        ('symbol', 'ancestors')
        ('symbol', '4'))))
  * set:
  <addset
    <baseset- [1, 3, 5]>,
    <generatorset+>>
  5
  3
  1
  0
  2
  4
  $ try 'sort(ancestors(4) or reverse(1::5))'
  (func
    ('symbol', 'sort')
    (or
      (list
        (func
          ('symbol', 'ancestors')
          ('symbol', '4'))
        (func
          ('symbol', 'reverse')
          (dagrange
            ('symbol', '1')
            ('symbol', '5'))))))
  * set:
  <addset+
    <generatorset+>,
    <baseset- [1, 3, 5]>>
  0
  1
  2
  3
  4
  5

test optimization of trivial `or` operation

  $ try --optimize '0|(1)|"2"|-2|tip|null'
  (or
    (list
      ('symbol', '0')
      (group
        ('symbol', '1'))
      ('string', '2')
      (negate
        ('symbol', '2'))
      ('symbol', 'tip')
      ('symbol', 'null')))
  * optimized:
  (func
    ('symbol', '_list')
    ('string', '0\x001\x002\x00-2\x00tip\x00null')
    define)
  * set:
  <baseset [0, 1, 2, 8, 9, -1]>
  0
  1
  2
  8
  9
  -1

  $ try --optimize '0|1|2:3'
  (or
    (list
      ('symbol', '0')
      ('symbol', '1')
      (range
        ('symbol', '2')
        ('symbol', '3'))))
  * optimized:
  (or
    (list
      (func
        ('symbol', '_list')
        ('string', '0\x001')
        define)
      (range
        ('symbol', '2')
        ('symbol', '3')
        define))
    define)
  * set:
  <addset
    <baseset [0, 1]>,
    <spanset+ 2:4>>
  0
  1
  2
  3

  $ try --optimize '0:1|2|3:4|5|6'
  (or
    (list
      (range
        ('symbol', '0')
        ('symbol', '1'))
      ('symbol', '2')
      (range
        ('symbol', '3')
        ('symbol', '4'))
      ('symbol', '5')
      ('symbol', '6')))
  * optimized:
  (or
    (list
      (range
        ('symbol', '0')
        ('symbol', '1')
        define)
      ('symbol', '2')
      (range
        ('symbol', '3')
        ('symbol', '4')
        define)
      (func
        ('symbol', '_list')
        ('string', '5\x006')
        define))
    define)
  * set:
  <addset
    <addset
      <spanset+ 0:2>,
      <baseset [2]>>,
    <addset
      <spanset+ 3:5>,
      <baseset [5, 6]>>>
  0
  1
  2
  3
  4
  5
  6

unoptimized `or` looks like this

  $ try --no-optimized -p analyzed '0|1|2|3|4'
  * analyzed:
  (or
    (list
      ('symbol', '0')
      ('symbol', '1')
      ('symbol', '2')
      ('symbol', '3')
      ('symbol', '4'))
    define)
  * set:
  <addset
    <addset
      <baseset [0]>,
      <baseset [1]>>,
    <addset
      <baseset [2]>,
      <addset
        <baseset [3]>,
        <baseset [4]>>>>
  0
  1
  2
  3
  4

test that `_list` should be narrowed by provided `subset`

  $ log '0:2 and (null|1|2|3)'
  1
  2

test that `_list` should remove duplicates

  $ log '0|1|2|1|2|-1|tip'
  0
  1
  2
  9

test unknown revision in `_list`

  $ log '0|unknown'
  abort: unknown revision 'unknown'!
  [255]

test integer range in `_list`

  $ log '-1|-10'
  9
  0

  $ log '-10|-11'
  abort: unknown revision '-11'!
  [255]

  $ log '9|10'
  abort: unknown revision '10'!
  [255]

test '0000' != '0' in `_list`

  $ log '0|0000'
  0
  -1

test ',' in `_list`
  $ log '0,1'
  hg: parse error: can't use a list in this context
  (see hg help "revsets.x or y")
  [255]
  $ try '0,1,2'
  (list
    ('symbol', '0')
    ('symbol', '1')
    ('symbol', '2'))
  hg: parse error: can't use a list in this context
  (see hg help "revsets.x or y")
  [255]

test that chained `or` operations make balanced addsets

  $ try '0:1|1:2|2:3|3:4|4:5'
  (or
    (list
      (range
        ('symbol', '0')
        ('symbol', '1'))
      (range
        ('symbol', '1')
        ('symbol', '2'))
      (range
        ('symbol', '2')
        ('symbol', '3'))
      (range
        ('symbol', '3')
        ('symbol', '4'))
      (range
        ('symbol', '4')
        ('symbol', '5'))))
  * set:
  <addset
    <addset
      <spanset+ 0:2>,
      <spanset+ 1:3>>,
    <addset
      <spanset+ 2:4>,
      <addset
        <spanset+ 3:5>,
        <spanset+ 4:6>>>>
  0
  1
  2
  3
  4
  5

no crash by empty group "()" while optimizing `or` operations

  $ try --optimize '0|()'
  (or
    (list
      ('symbol', '0')
      (group
        None)))
  * optimized:
  (or
    (list
      ('symbol', '0')
      None)
    define)
  hg: parse error: missing argument
  [255]

test that chained `or` operations never eat up stack (issue4624)
(uses `0:1` instead of `0` to avoid future optimization of trivial revisions)

  $ hg log -T '{rev}\n' -r `python -c "print '+'.join(['0:1'] * 500)"`
  0
  1

test that repeated `-r` options never eat up stack (issue4565)
(uses `-r 0::1` to avoid possible optimization at old-style parser)

  $ hg log -T '{rev}\n' `python -c "for i in xrange(500): print '-r 0::1 ',"`
  0
  1

check that conversion to only works
  $ try --optimize '::3 - ::1'
  (minus
    (dagrangepre
      ('symbol', '3'))
    (dagrangepre
      ('symbol', '1')))
  * optimized:
  (func
    ('symbol', 'only')
    (list
      ('symbol', '3')
      ('symbol', '1'))
    define)
  * set:
  <baseset+ [3]>
  3
  $ try --optimize 'ancestors(1) - ancestors(3)'
  (minus
    (func
      ('symbol', 'ancestors')
      ('symbol', '1'))
    (func
      ('symbol', 'ancestors')
      ('symbol', '3')))
  * optimized:
  (func
    ('symbol', 'only')
    (list
      ('symbol', '1')
      ('symbol', '3'))
    define)
  * set:
  <baseset+ []>
  $ try --optimize 'not ::2 and ::6'
  (and
    (not
      (dagrangepre
        ('symbol', '2')))
    (dagrangepre
      ('symbol', '6')))
  * optimized:
  (func
    ('symbol', 'only')
    (list
      ('symbol', '6')
      ('symbol', '2'))
    define)
  * set:
  <baseset+ [3, 4, 5, 6]>
  3
  4
  5
  6
  $ try --optimize 'ancestors(6) and not ancestors(4)'
  (and
    (func
      ('symbol', 'ancestors')
      ('symbol', '6'))
    (not
      (func
        ('symbol', 'ancestors')
        ('symbol', '4'))))
  * optimized:
  (func
    ('symbol', 'only')
    (list
      ('symbol', '6')
      ('symbol', '4'))
    define)
  * set:
  <baseset+ [3, 5, 6]>
  3
  5
  6

no crash by empty group "()" while optimizing to "only()"

  $ try --optimize '::1 and ()'
  (and
    (dagrangepre
      ('symbol', '1'))
    (group
      None))
  * optimized:
  (and
    None
    (func
      ('symbol', 'ancestors')
      ('symbol', '1')
      define)
    define)
  hg: parse error: missing argument
  [255]

optimization to only() works only if ancestors() takes only one argument

  $ hg debugrevspec -p optimized 'ancestors(6) - ancestors(4, 1)'
  * optimized:
  (difference
    (func
      ('symbol', 'ancestors')
      ('symbol', '6')
      define)
    (func
      ('symbol', 'ancestors')
      (list
        ('symbol', '4')
        ('symbol', '1'))
      any)
    define)
  0
  1
  3
  5
  6
  $ hg debugrevspec -p optimized 'ancestors(6, 1) - ancestors(4)'
  * optimized:
  (difference
    (func
      ('symbol', 'ancestors')
      (list
        ('symbol', '6')
        ('symbol', '1'))
      define)
    (func
      ('symbol', 'ancestors')
      ('symbol', '4')
      any)
    define)
  5
  6

optimization disabled if keyword arguments passed (because we're too lazy
to support it)

  $ hg debugrevspec -p optimized 'ancestors(set=6) - ancestors(set=4)'
  * optimized:
  (difference
    (func
      ('symbol', 'ancestors')
      (keyvalue
        ('symbol', 'set')
        ('symbol', '6'))
      define)
    (func
      ('symbol', 'ancestors')
      (keyvalue
        ('symbol', 'set')
        ('symbol', '4'))
      any)
    define)
  3
  5
  6

invalid function call should not be optimized to only()

  $ log '"ancestors"(6) and not ancestors(4)'
  hg: parse error: not a symbol
  [255]

  $ log 'ancestors(6) and not "ancestors"(4)'
  hg: parse error: not a symbol
  [255]

we can use patterns when searching for tags

  $ log 'tag("1..*")'
  abort: tag '1..*' does not exist!
  [255]
  $ log 'tag("re:1..*")'
  6
  $ log 'tag("re:[0-9].[0-9]")'
  6
  $ log 'tag("literal:1.0")'
  6
  $ log 'tag("re:0..*")'

  $ log 'tag(unknown)'
  abort: tag 'unknown' does not exist!
  [255]
  $ log 'tag("re:unknown")'
  $ log 'present(tag("unknown"))'
  $ log 'present(tag("re:unknown"))'
  $ log 'branch(unknown)'
  abort: unknown revision 'unknown'!
  [255]
  $ log 'branch("literal:unknown")'
  abort: branch 'unknown' does not exist!
  [255]
  $ log 'branch("re:unknown")'
  $ log 'present(branch("unknown"))'
  $ log 'present(branch("re:unknown"))'
  $ log 'user(bob)'
  2

  $ log '4::8'
  4
  8
  $ log '4:8'
  4
  5
  6
  7
  8

  $ log 'sort(!merge() & (modifies(b) | user(bob) | keyword(bug) | keyword(issue) & 1::9), "-date")'
  4
  2
  5

  $ log 'not 0 and 0:2'
  1
  2
  $ log 'not 1 and 0:2'
  0
  2
  $ log 'not 2 and 0:2'
  0
  1
  $ log '(1 and 2)::'
  $ log '(1 and 2):'
  $ log '(1 and 2):3'
  $ log 'sort(head(), -rev)'
  9
  7
  6
  5
  4
  3
  2
  1
  0
  $ log '4::8 - 8'
  4

matching() should preserve the order of the input set:

  $ log '(2 or 3 or 1) and matching(1 or 2 or 3)'
  2
  3
  1

  $ log 'named("unknown")'
  abort: namespace 'unknown' does not exist!
  [255]
  $ log 'named("re:unknown")'
  abort: no namespace exists that match 'unknown'!
  [255]
  $ log 'present(named("unknown"))'
  $ log 'present(named("re:unknown"))'

  $ log 'tag()'
  6
  $ log 'named("tags")'
  6

issue2437

  $ log '3 and p1(5)'
  3
  $ log '4 and p2(6)'
  4
  $ log '1 and parents(:2)'
  1
  $ log '2 and children(1:)'
  2
  $ log 'roots(all()) or roots(all())'
  0
  $ hg debugrevspec 'roots(all()) or roots(all())'
  0
  $ log 'heads(branch(é)) or heads(branch(é))'
  9
  $ log 'ancestors(8) and (heads(branch("-a-b-c-")) or heads(branch(é)))'
  4

issue2654: report a parse error if the revset was not completely parsed

  $ log '1 OR 2'
  hg: parse error at 2: invalid token
  [255]

or operator should preserve ordering:
  $ log 'reverse(2::4) or tip'
  4
  2
  9

parentrevspec

  $ log 'merge()^0'
  6
  $ log 'merge()^'
  5
  $ log 'merge()^1'
  5
  $ log 'merge()^2'
  4
  $ log '(not merge())^2'
  $ log 'merge()^^'
  3
  $ log 'merge()^1^'
  3
  $ log 'merge()^^^'
  1

  $ hg debugrevspec -s '(merge() | 0)~-1'
  * set:
  <baseset+ [1, 7]>
  1
  7
  $ log 'merge()~-1'
  7
  $ log 'tip~-1'
  $ log '(tip | merge())~-1'
  7
  $ log 'merge()~0'
  6
  $ log 'merge()~1'
  5
  $ log 'merge()~2'
  3
  $ log 'merge()~2^1'
  1
  $ log 'merge()~3'
  1

  $ log '(-3:tip)^'
  4
  6
  8

  $ log 'tip^foo'
  hg: parse error: ^ expects a number 0, 1, or 2
  [255]

  $ log 'branchpoint()~-1'
  abort: revision in set has more than one child!
  [255]

Bogus function gets suggestions
  $ log 'add()'
  hg: parse error: unknown identifier: add
  (did you mean adds?)
  [255]
  $ log 'added()'
  hg: parse error: unknown identifier: added
  (did you mean adds?)
  [255]
  $ log 'remo()'
  hg: parse error: unknown identifier: remo
  (did you mean one of remote, removes?)
  [255]
  $ log 'babar()'
  hg: parse error: unknown identifier: babar
  [255]

Bogus function with a similar internal name doesn't suggest the internal name
  $ log 'matches()'
  hg: parse error: unknown identifier: matches
  (did you mean matching?)
  [255]

Undocumented functions aren't suggested as similar either
  $ log 'tagged2()'
  hg: parse error: unknown identifier: tagged2
  [255]

multiple revspecs

  $ hg log -r 'tip~1:tip' -r 'tip~2:tip~1' --template '{rev}\n'
  8
  9
  4
  5
  6
  7

test usage in revpair (with "+")

(real pair)

  $ hg diff -r 'tip^^' -r 'tip'
  diff -r 2326846efdab -r 24286f4ae135 .hgtags
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/.hgtags	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +e0cc66ef77e8b6f711815af4e001a6594fde3ba5 1.0
  $ hg diff -r 'tip^^::tip'
  diff -r 2326846efdab -r 24286f4ae135 .hgtags
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/.hgtags	Thu Jan 01 00:00:00 1970 +0000
  @@ -0,0 +1,1 @@
  +e0cc66ef77e8b6f711815af4e001a6594fde3ba5 1.0

(single rev)

  $ hg diff -r 'tip^' -r 'tip^'
  $ hg diff -r 'tip^:tip^'

(single rev that does not looks like a range)

  $ hg diff -r 'tip^::tip^ or tip^'
  diff -r d5d0dcbdc4d9 .hgtags
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/.hgtags	* (glob)
  @@ -0,0 +1,1 @@
  +e0cc66ef77e8b6f711815af4e001a6594fde3ba5 1.0
  $ hg diff -r 'tip^ or tip^'
  diff -r d5d0dcbdc4d9 .hgtags
  --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  +++ b/.hgtags	* (glob)
  @@ -0,0 +1,1 @@
  +e0cc66ef77e8b6f711815af4e001a6594fde3ba5 1.0

(no rev)

  $ hg diff -r 'author("babar") or author("celeste")'
  abort: empty revision range
  [255]

aliases:

  $ echo '[revsetalias]' >> .hg/hgrc
  $ echo 'm = merge()' >> .hg/hgrc
(revset aliases can override builtin revsets)
  $ echo 'p2($1) = p1($1)' >> .hg/hgrc
  $ echo 'sincem = descendants(m)' >> .hg/hgrc
  $ echo 'd($1) = reverse(sort($1, date))' >> .hg/hgrc
  $ echo 'rs(ARG1, ARG2) = reverse(sort(ARG1, ARG2))' >> .hg/hgrc
  $ echo 'rs4(ARG1, ARGA, ARGB, ARG2) = reverse(sort(ARG1, ARG2))' >> .hg/hgrc

  $ try m
  ('symbol', 'm')
  * expanded:
  (func
    ('symbol', 'merge')
    None)
  * set:
  <filteredset
    <fullreposet+ 0:10>,
    <merge>>
  6

  $ HGPLAIN=1
  $ export HGPLAIN
  $ try m
  ('symbol', 'm')
  abort: unknown revision 'm'!
  [255]

  $ HGPLAINEXCEPT=revsetalias
  $ export HGPLAINEXCEPT
  $ try m
  ('symbol', 'm')
  * expanded:
  (func
    ('symbol', 'merge')
    None)
  * set:
  <filteredset
    <fullreposet+ 0:10>,
    <merge>>
  6

  $ unset HGPLAIN
  $ unset HGPLAINEXCEPT

  $ try 'p2(.)'
  (func
    ('symbol', 'p2')
    ('symbol', '.'))
  * expanded:
  (func
    ('symbol', 'p1')
    ('symbol', '.'))
  * set:
  <baseset+ [8]>
  8

  $ HGPLAIN=1
  $ export HGPLAIN
  $ try 'p2(.)'
  (func
    ('symbol', 'p2')
    ('symbol', '.'))
  * set:
  <baseset+ []>

  $ HGPLAINEXCEPT=revsetalias
  $ export HGPLAINEXCEPT
  $ try 'p2(.)'
  (func
    ('symbol', 'p2')
    ('symbol', '.'))
  * expanded:
  (func
    ('symbol', 'p1')
    ('symbol', '.'))
  * set:
  <baseset+ [8]>
  8

  $ unset HGPLAIN
  $ unset HGPLAINEXCEPT

test alias recursion

  $ try sincem
  ('symbol', 'sincem')
  * expanded:
  (func
    ('symbol', 'descendants')
    (func
      ('symbol', 'merge')
      None))
  * set:
  <addset+
    <filteredset
      <fullreposet+ 0:10>,
      <merge>>,
    <generatorset+>>
  6
  7

test infinite recursion

  $ echo 'recurse1 = recurse2' >> .hg/hgrc
  $ echo 'recurse2 = recurse1' >> .hg/hgrc
  $ try recurse1
  ('symbol', 'recurse1')
  hg: parse error: infinite expansion of revset alias "recurse1" detected
  [255]

  $ echo 'level1($1, $2) = $1 or $2' >> .hg/hgrc
  $ echo 'level2($1, $2) = level1($2, $1)' >> .hg/hgrc
  $ try "level2(level1(1, 2), 3)"
  (func
    ('symbol', 'level2')
    (list
      (func
        ('symbol', 'level1')
        (list
          ('symbol', '1')
          ('symbol', '2')))
      ('symbol', '3')))
  * expanded:
  (or
    (list
      ('symbol', '3')
      (or
        (list
          ('symbol', '1')
          ('symbol', '2')))))
  * set:
  <addset
    <baseset [3]>,
    <baseset [1, 2]>>
  3
  1
  2

test nesting and variable passing

  $ echo 'nested($1) = nested2($1)' >> .hg/hgrc
  $ echo 'nested2($1) = nested3($1)' >> .hg/hgrc
  $ echo 'nested3($1) = max($1)' >> .hg/hgrc
  $ try 'nested(2:5)'
  (func
    ('symbol', 'nested')
    (range
      ('symbol', '2')
      ('symbol', '5')))
  * expanded:
  (func
    ('symbol', 'max')
    (range
      ('symbol', '2')
      ('symbol', '5')))
  * set:
  <baseset
    <max
      <fullreposet+ 0:10>,
      <spanset+ 2:6>>>
  5

test chained `or` operations are flattened at parsing phase

  $ echo 'chainedorops($1, $2, $3) = $1|$2|$3' >> .hg/hgrc
  $ try 'chainedorops(0:1, 1:2, 2:3)'
  (func
    ('symbol', 'chainedorops')
    (list
      (range
        ('symbol', '0')
        ('symbol', '1'))
      (range
        ('symbol', '1')
        ('symbol', '2'))
      (range
        ('symbol', '2')
        ('symbol', '3'))))
  * expanded:
  (or
    (list
      (range
        ('symbol', '0')
        ('symbol', '1'))
      (range
        ('symbol', '1')
        ('symbol', '2'))
      (range
        ('symbol', '2')
        ('symbol', '3'))))
  * set:
  <addset
    <spanset+ 0:2>,
    <addset
      <spanset+ 1:3>,
      <spanset+ 2:4>>>
  0
  1
  2
  3

test variable isolation, variable placeholders are rewritten as string
then parsed and matched again as string. Check they do not leak too
far away.

  $ echo 'injectparamasstring = max("$1")' >> .hg/hgrc
  $ echo 'callinjection($1) = descendants(injectparamasstring)' >> .hg/hgrc
  $ try 'callinjection(2:5)'
  (func
    ('symbol', 'callinjection')
    (range
      ('symbol', '2')
      ('symbol', '5')))
  * expanded:
  (func
    ('symbol', 'descendants')
    (func
      ('symbol', 'max')
      ('string', '$1')))
  abort: unknown revision '$1'!
  [255]

test scope of alias expansion: 'universe' is expanded prior to 'shadowall(0)',
but 'all()' should never be substituted to '0()'.

  $ echo 'universe = all()' >> .hg/hgrc
  $ echo 'shadowall(all) = all and universe' >> .hg/hgrc
  $ try 'shadowall(0)'
  (func
    ('symbol', 'shadowall')
    ('symbol', '0'))
  * expanded:
  (and
    ('symbol', '0')
    (func
      ('symbol', 'all')
      None))
  * set:
  <filteredset
    <baseset [0]>,
    <spanset+ 0:10>>
  0

test unknown reference:

  $ try "unknownref(0)" --config 'revsetalias.unknownref($1)=$1:$2'
  (func
    ('symbol', 'unknownref')
    ('symbol', '0'))
  abort: bad definition of revset alias "unknownref": invalid symbol '$2'
  [255]

  $ hg debugrevspec --debug --config revsetalias.anotherbadone='branch(' "tip"
  ('symbol', 'tip')
  warning: bad definition of revset alias "anotherbadone": at 7: not a prefix: end
  * set:
  <baseset [9]>
  9

  $ try 'tip'
  ('symbol', 'tip')
  * set:
  <baseset [9]>
  9

  $ hg debugrevspec --debug --config revsetalias.'bad name'='tip' "tip"
  ('symbol', 'tip')
  warning: bad declaration of revset alias "bad name": at 4: invalid token
  * set:
  <baseset [9]>
  9
  $ echo 'strictreplacing($1, $10) = $10 or desc("$1")' >> .hg/hgrc
  $ try 'strictreplacing("foo", tip)'
  (func
    ('symbol', 'strictreplacing')
    (list
      ('string', 'foo')
      ('symbol', 'tip')))
  * expanded:
  (or
    (list
      ('symbol', 'tip')
      (func
        ('symbol', 'desc')
        ('string', '$1'))))
  * set:
  <addset
    <baseset [9]>,
    <filteredset
      <fullreposet+ 0:10>,
      <desc '$1'>>>
  9

  $ try 'd(2:5)'
  (func
    ('symbol', 'd')
    (range
      ('symbol', '2')
      ('symbol', '5')))
  * expanded:
  (func
    ('symbol', 'reverse')
    (func
      ('symbol', 'sort')
      (list
        (range
          ('symbol', '2')
          ('symbol', '5'))
        ('symbol', 'date'))))
  * set:
  <baseset [4, 5, 3, 2]>
  4
  5
  3
  2
  $ try 'rs(2 or 3, date)'
  (func
    ('symbol', 'rs')
    (list
      (or
        (list
          ('symbol', '2')
          ('symbol', '3')))
      ('symbol', 'date')))
  * expanded:
  (func
    ('symbol', 'reverse')
    (func
      ('symbol', 'sort')
      (list
        (or
          (list
            ('symbol', '2')
            ('symbol', '3')))
        ('symbol', 'date'))))
  * set:
  <baseset [3, 2]>
  3
  2
  $ try 'rs()'
  (func
    ('symbol', 'rs')
    None)
  hg: parse error: invalid number of arguments: 0
  [255]
  $ try 'rs(2)'
  (func
    ('symbol', 'rs')
    ('symbol', '2'))
  hg: parse error: invalid number of arguments: 1
  [255]
  $ try 'rs(2, data, 7)'
  (func
    ('symbol', 'rs')
    (list
      ('symbol', '2')
      ('symbol', 'data')
      ('symbol', '7')))
  hg: parse error: invalid number of arguments: 3
  [255]
  $ try 'rs4(2 or 3, x, x, date)'
  (func
    ('symbol', 'rs4')
    (list
      (or
        (list
          ('symbol', '2')
          ('symbol', '3')))
      ('symbol', 'x')
      ('symbol', 'x')
      ('symbol', 'date')))
  * expanded:
  (func
    ('symbol', 'reverse')
    (func
      ('symbol', 'sort')
      (list
        (or
          (list
            ('symbol', '2')
            ('symbol', '3')))
        ('symbol', 'date'))))
  * set:
  <baseset [3, 2]>
  3
  2

issue4553: check that revset aliases override existing hash prefix

  $ hg log -qr e
  6:e0cc66ef77e8

  $ hg log -qr e --config revsetalias.e="all()"
  0:2785f51eece5
  1:d75937da8da0
  2:5ed5505e9f1c
  3:8528aa5637f2
  4:2326846efdab
  5:904fa392b941
  6:e0cc66ef77e8
  7:013af1973af4
  8:d5d0dcbdc4d9
  9:24286f4ae135

  $ hg log -qr e: --config revsetalias.e="0"
  0:2785f51eece5
  1:d75937da8da0
  2:5ed5505e9f1c
  3:8528aa5637f2
  4:2326846efdab
  5:904fa392b941
  6:e0cc66ef77e8
  7:013af1973af4
  8:d5d0dcbdc4d9
  9:24286f4ae135

  $ hg log -qr :e --config revsetalias.e="9"
  0:2785f51eece5
  1:d75937da8da0
  2:5ed5505e9f1c
  3:8528aa5637f2
  4:2326846efdab
  5:904fa392b941
  6:e0cc66ef77e8
  7:013af1973af4
  8:d5d0dcbdc4d9
  9:24286f4ae135

  $ hg log -qr e:
  6:e0cc66ef77e8
  7:013af1973af4
  8:d5d0dcbdc4d9
  9:24286f4ae135

  $ hg log -qr :e
  0:2785f51eece5
  1:d75937da8da0
  2:5ed5505e9f1c
  3:8528aa5637f2
  4:2326846efdab
  5:904fa392b941
  6:e0cc66ef77e8

issue2549 - correct optimizations

  $ try 'limit(1 or 2 or 3, 2) and not 2'
  (and
    (func
      ('symbol', 'limit')
      (list
        (or
          (list
            ('symbol', '1')
            ('symbol', '2')
            ('symbol', '3')))
        ('symbol', '2')))
    (not
      ('symbol', '2')))
  * set:
  <filteredset
    <baseset [1, 2]>,
    <not
      <baseset [2]>>>
  1
  $ try 'max(1 or 2) and not 2'
  (and
    (func
      ('symbol', 'max')
      (or
        (list
          ('symbol', '1')
          ('symbol', '2'))))
    (not
      ('symbol', '2')))
  * set:
  <filteredset
    <baseset
      <max
        <fullreposet+ 0:10>,
        <baseset [1, 2]>>>,
    <not
      <baseset [2]>>>
  $ try 'min(1 or 2) and not 1'
  (and
    (func
      ('symbol', 'min')
      (or
        (list
          ('symbol', '1')
          ('symbol', '2'))))
    (not
      ('symbol', '1')))
  * set:
  <filteredset
    <baseset
      <min
        <fullreposet+ 0:10>,
        <baseset [1, 2]>>>,
    <not
      <baseset [1]>>>
  $ try 'last(1 or 2, 1) and not 2'
  (and
    (func
      ('symbol', 'last')
      (list
        (or
          (list
            ('symbol', '1')
            ('symbol', '2')))
        ('symbol', '1')))
    (not
      ('symbol', '2')))
  * set:
  <filteredset
    <baseset [2]>,
    <not
      <baseset [2]>>>

issue4289 - ordering of built-ins
  $ hg log -M -q -r 3:2
  3:8528aa5637f2
  2:5ed5505e9f1c

test revsets started with 40-chars hash (issue3669)

  $ ISSUE3669_TIP=`hg tip --template '{node}'`
  $ hg log -r "${ISSUE3669_TIP}" --template '{rev}\n'
  9
  $ hg log -r "${ISSUE3669_TIP}^" --template '{rev}\n'
  8

test or-ed indirect predicates (issue3775)

  $ log '6 or 6^1' | sort
  5
  6
  $ log '6^1 or 6' | sort
  5
  6
  $ log '4 or 4~1' | sort
  2
  4
  $ log '4~1 or 4' | sort
  2
  4
  $ log '(0 or 2):(4 or 6) or 0 or 6' | sort
  0
  1
  2
  3
  4
  5
  6
  $ log '0 or 6 or (0 or 2):(4 or 6)' | sort
  0
  1
  2
  3
  4
  5
  6

tests for 'remote()' predicate:
#.  (csets in remote) (id)            (remote)
1.  less than local   current branch  "default"
2.  same with local   specified       "default"
3.  more than local   specified       specified

  $ hg clone --quiet -U . ../remote3
  $ cd ../remote3
  $ hg update -q 7
  $ echo r > r
  $ hg ci -Aqm 10
  $ log 'remote()'
  7
  $ log 'remote("a-b-c-")'
  2
  $ cd ../repo
  $ log 'remote(".a.b.c.", "../remote3")'

tests for concatenation of strings/symbols by "##"

  $ try "278 ## '5f5' ## 1ee ## 'ce5'"
  (_concat
    (_concat
      (_concat
        ('symbol', '278')
        ('string', '5f5'))
      ('symbol', '1ee'))
    ('string', 'ce5'))
  * concatenated:
  ('string', '2785f51eece5')
  * set:
  <baseset [0]>
  0

  $ echo 'cat4($1, $2, $3, $4) = $1 ## $2 ## $3 ## $4' >> .hg/hgrc
  $ try "cat4(278, '5f5', 1ee, 'ce5')"
  (func
    ('symbol', 'cat4')
    (list
      ('symbol', '278')
      ('string', '5f5')
      ('symbol', '1ee')
      ('string', 'ce5')))
  * expanded:
  (_concat
    (_concat
      (_concat
        ('symbol', '278')
        ('string', '5f5'))
      ('symbol', '1ee'))
    ('string', 'ce5'))
  * concatenated:
  ('string', '2785f51eece5')
  * set:
  <baseset [0]>
  0

(check concatenation in alias nesting)

  $ echo 'cat2($1, $2) = $1 ## $2' >> .hg/hgrc
  $ echo 'cat2x2($1, $2, $3, $4) = cat2($1 ## $2, $3 ## $4)' >> .hg/hgrc
  $ log "cat2x2(278, '5f5', 1ee, 'ce5')"
  0

(check operator priority)

  $ echo 'cat2n2($1, $2, $3, $4) = $1 ## $2 or $3 ## $4~2' >> .hg/hgrc
  $ log "cat2n2(2785f5, 1eece5, 24286f, 4ae135)"
  0
  4

  $ cd ..

prepare repository that has "default" branches of multiple roots

  $ hg init namedbranch
  $ cd namedbranch

  $ echo default0 >> a
  $ hg ci -Aqm0
  $ echo default1 >> a
  $ hg ci -m1

  $ hg branch -q stable
  $ echo stable2 >> a
  $ hg ci -m2
  $ echo stable3 >> a
  $ hg ci -m3

  $ hg update -q null
  $ echo default4 >> a
  $ hg ci -Aqm4
  $ echo default5 >> a
  $ hg ci -m5

"null" revision belongs to "default" branch (issue4683)

  $ log 'branch(null)'
  0
  1
  4
  5

"null" revision belongs to "default" branch, but it shouldn't appear in set
unless explicitly specified (issue4682)

  $ log 'children(branch(default))'
  1
  2
  5

  $ cd ..

test author/desc/keyword in problematic encoding
# unicode: cp932:
# u30A2    0x83 0x41(= 'A')
# u30C2    0x83 0x61(= 'a')

  $ hg init problematicencoding
  $ cd problematicencoding

  $ python > setup.sh <<EOF
  > print u'''
  > echo a > text
  > hg add text
  > hg --encoding utf-8 commit -u '\u30A2' -m none
  > echo b > text
  > hg --encoding utf-8 commit -u '\u30C2' -m none
  > echo c > text
  > hg --encoding utf-8 commit -u none -m '\u30A2'
  > echo d > text
  > hg --encoding utf-8 commit -u none -m '\u30C2'
  > '''.encode('utf-8')
  > EOF
  $ sh < setup.sh

test in problematic encoding
  $ python > test.sh <<EOF
  > print u'''
  > hg --encoding cp932 log --template '{rev}\\n' -r 'author(\u30A2)'
  > echo ====
  > hg --encoding cp932 log --template '{rev}\\n' -r 'author(\u30C2)'
  > echo ====
  > hg --encoding cp932 log --template '{rev}\\n' -r 'desc(\u30A2)'
  > echo ====
  > hg --encoding cp932 log --template '{rev}\\n' -r 'desc(\u30C2)'
  > echo ====
  > hg --encoding cp932 log --template '{rev}\\n' -r 'keyword(\u30A2)'
  > echo ====
  > hg --encoding cp932 log --template '{rev}\\n' -r 'keyword(\u30C2)'
  > '''.encode('cp932')
  > EOF
  $ sh < test.sh
  0
  ====
  1
  ====
  2
  ====
  3
  ====
  0
  2
  ====
  1
  3

test error message of bad revset
  $ hg log -r 'foo\\'
  hg: parse error at 3: syntax error in revset 'foo\\'
  [255]

  $ cd ..

Test that revset predicate of extension isn't loaded at failure of
loading it

  $ cd repo

  $ cat <<EOF > $TESTTMP/custompredicate.py
  > from mercurial import error, registrar, revset
  > 
  > revsetpredicate = registrar.revsetpredicate()
  > 
  > @revsetpredicate('custom1()')
  > def custom1(repo, subset, x):
  >     return revset.baseset([1])
  > 
  > raise error.Abort('intentional failure of loading extension')
  > EOF
  $ cat <<EOF > .hg/hgrc
  > [extensions]
  > custompredicate = $TESTTMP/custompredicate.py
  > EOF

  $ hg debugrevspec "custom1()"
  *** failed to import extension custompredicate from $TESTTMP/custompredicate.py: intentional failure of loading extension
  hg: parse error: unknown identifier: custom1
  [255]

  $ cd ..