Mercurial: revision graph

graph

less more | rev 40800: (0) -30000 -10000 -3000 -1000 -960 +960 +1000 +3000 +10000 tip

loggingutil: document openlogfile()
Sun, 18 Nov 2018 18:35:31 +0900, by Yuya Nishihara
loggingutil: extract openlogfile() and proxylogger to new module
Sun, 18 Nov 2018 18:25:37 +0900, by Yuya Nishihara
blackbox: pass in options to _openlogfile() as arguments
Sun, 18 Nov 2018 18:21:39 +0900, by Yuya Nishihara
blackbox: just try writing to repo.vfs and update lastlogger on success
Sat, 17 Nov 2018 22:10:27 +0900, by Yuya Nishihara
vfs: add option to not create parent directories implicitly
Tue, 20 Nov 2018 22:31:12 +0900, by Yuya Nishihara
repo: add a `wcachevfs` to access the `.hg/wcache/` directory
Thu, 15 Nov 2018 02:55:33 +0100, by Boris Feld
cache: create `wcache` directory at init time
Thu, 15 Nov 2018 02:46:31 +0100, by Boris Feld
cache: create `cache` directory at init time
Thu, 15 Nov 2018 02:38:55 +0100, by Boris Feld
check-exec: write file in 'wcache' instead of 'cache'
Thu, 15 Nov 2018 17:08:23 +0100, by Boris Feld
rebase: abort in-mem rebase if there's a dirty merge state stable
Mon, 03 Dec 2018 09:36:40 -0800, by Martin von Zweigbergk
rebase: preserve working copy when redoing in-mem rebase on disk stable
Fri, 30 Nov 2018 16:21:37 -0800, by Martin von Zweigbergk
tests: show that in-mem rebase falling back loses state stable
Fri, 30 Nov 2018 15:08:43 -0800, by Martin von Zweigbergk
commandserver: get around ETIMEDOUT raised by selectors2 stable
Mon, 03 Dec 2018 21:45:15 +0900, by Yuya Nishihara
selectors2: backport minimal fix of timeout handling from 2.0.1 stable
Mon, 03 Dec 2018 21:31:19 +0900, by Yuya Nishihara
mmapindex: set default to 1MB
Fri, 23 Nov 2018 06:09:44 +0100, by Boris Feld
mmapindex: move the 'mmapindexthreshold' option out of experimental
Fri, 23 Nov 2018 06:07:33 +0100, by Boris Feld
perf: add a --rev attribute to perfindex
Sat, 01 Dec 2018 15:57:27 +0100, by Boris Feld
perf: update perfindex to be more realistic
Fri, 23 Nov 2018 06:03:38 +0100, by Boris Feld
match: drop unnecessary wrapping of regex in group
Sun, 02 Dec 2018 13:09:46 -0800, by Martin von Zweigbergk
match: use _BASE_SIZE instead of magic value 4
Sun, 02 Dec 2018 13:45:20 -0800, by Martin von Zweigbergk
match: make "groupsize" include the trailing "|"
Sun, 02 Dec 2018 13:44:49 -0800, by Martin von Zweigbergk
match: fix an unaligned (but harmless) indent
Sun, 02 Dec 2018 13:09:43 -0800, by Martin von Zweigbergk
match: raise an Abort error instead of OverflowError
Thu, 22 Nov 2018 17:41:10 +0100, by Boris Feld
match: avoid translating glob to matcher multiple times for large sets
Thu, 22 Nov 2018 21:02:02 +0100, by Boris Feld
match: extract function that group regexps
Thu, 22 Nov 2018 17:25:49 +0100, by Boris Feld
match: test for overflow error in pattern
Thu, 22 Nov 2018 17:16:05 +0100, by Boris Feld
match: extract a literal constant into a symbolic one
Thu, 22 Nov 2018 17:20:32 +0100, by Boris Feld
tests: apply binary mode to output in seq.py
Sat, 01 Dec 2018 21:42:48 -0500, by Matt Harbison
perf: add a `--clear-caches` to `perfbranchmapupdate`
Fri, 23 Nov 2018 01:09:37 +0100, by Boris Feld
perf: start from an existing branchmap if possible
Wed, 21 Nov 2018 21:11:47 +0000, by Boris Feld
perf: rely on repoview for perfbranchmapupdate
Wed, 21 Nov 2018 20:35:22 +0000, by Boris Feld
perf: pre-indent some code in `perfbranchmapupdate`
Wed, 21 Nov 2018 22:56:06 +0100, by Boris Feld
perf: add a `perfbranchmapupdate` command
Wed, 21 Nov 2018 12:02:25 +0000, by Boris Feld
push: config option to control behavior when pushing to a publishing server
Mon, 05 Nov 2018 13:52:19 +0800, by Anton Shestakov
narrowcommands: remove an unrequired `repo.narrowpats` call
Fri, 30 Nov 2018 17:42:55 +0300, by Pulkit Goyal
manifest: reject lines shorter than 42 bytes, not 22
Thu, 29 Nov 2018 16:44:01 -0500, by Augie Fackler
blackbox: initialize logger with repo instance
Sun, 11 Nov 2018 20:05:38 +0900, by Yuya Nishihara
blackbox: do not nullify repo to deactivate the logger on failure
Sat, 17 Nov 2018 20:56:25 +0900, by Yuya Nishihara
blackbox: extract global last logger to proxylogger class
Sun, 11 Nov 2018 20:02:34 +0900, by Yuya Nishihara
ui: pass in bytes opts dict to logger.log()
Sun, 11 Nov 2018 19:36:21 +0900, by Yuya Nishihara
ui: pass in formatted message to logger.log()
Sun, 11 Nov 2018 19:35:33 +0900, by Yuya Nishihara
blackbox: send debug message to logger by core ui
Sun, 11 Nov 2018 17:34:46 +0900, by Yuya Nishihara
blackbox: change the way of deactivating the logger on write error
Sat, 17 Nov 2018 20:23:50 +0900, by Yuya Nishihara
match: remove obsolete catching of OverflowError
Wed, 28 Nov 2018 10:12:50 -0800, by Martin von Zweigbergk
sparse: raise a move verbose index error from the C code
Tue, 27 Nov 2018 02:10:14 +0100, by Boris Feld
narrow: drop the bundle2 capability since we have server capabilities (BC)
Fri, 05 Oct 2018 23:10:56 +0300, by Pulkit Goyal
vfs: extract the audit path logic into a submethod
Sun, 02 Jul 2017 04:06:24 +0200, by Boris Feld
subrepo-git: use an official origvfs when appropriate
Thu, 22 Nov 2018 20:01:28 +0100, by Boris Feld
revert: extract origvfs logic in a sub-function
Thu, 22 Nov 2018 19:26:05 +0100, by Boris Feld
vfs: treat 'undo.' file the same as 'journal.' file
Thu, 22 Nov 2018 18:44:07 +0100, by Boris Feld
perf: add a perfignore command
Thu, 22 Nov 2018 21:00:13 +0100, by Boris Feld
py3: use pycompat.xrange instead of xrange
Mon, 26 Nov 2018 15:36:06 +0300, by Pulkit Goyal
store: write fncache only once if there are both adds and removes
Tue, 27 Nov 2018 16:16:13 +0300, by Pulkit Goyal
perf: disable revlogs clearing in `perftags` by default
Tue, 20 Nov 2018 17:44:24 +0000, by Boris Feld
perf: add a `clear-revlogs` flag to `perfbookmarks`
Tue, 20 Nov 2018 10:55:20 +0000, by Boris Feld
tags: cache `repo.changelog` access when checking tags nodes
Tue, 20 Nov 2018 10:38:15 +0000, by Boris Feld
perf: add a `clear-revlogs` flag to `perftags`
Tue, 20 Nov 2018 10:46:20 +0000, by Boris Feld
perf: stop creating new revlog by hand in perftags
Sun, 25 Nov 2018 13:37:53 +0100, by Boris Feld
revlog: update the documentation for `trim_endidx`
Mon, 26 Nov 2018 00:23:12 +0100, by Boris Feld
revlog: properly detect corrupted revlog in `index_get_length`
Mon, 26 Nov 2018 00:21:09 +0100, by Boris Feld
perf: rename `perfhelper-tracecopies` to `perfhelper-pathcopies`
Mon, 26 Nov 2018 00:15:12 +0100, by Boris Feld
perf: add a docstring to `perfpathcopies`
Mon, 26 Nov 2018 00:13:50 +0100, by Boris Feld
revlog: update the docstring of `ancestors` to match reality
Mon, 26 Nov 2018 00:08:11 +0100, by Boris Feld
remotefilelog: fix typo in docstring
Mon, 26 Nov 2018 15:53:34 -0500, by Augie Fackler
store: append to fncache if there are only new files to write
Fri, 23 Nov 2018 18:58:16 +0300, by Pulkit Goyal
py3: fix couple of division operator to do integer divison
Mon, 26 Nov 2018 15:38:35 +0300, by Pulkit Goyal
py3: use dict.items() instead of dict.iteritems()
Mon, 26 Nov 2018 15:37:48 +0300, by Pulkit Goyal
py3: convert strings to bytes in tests/test-remotefilelog-histpack.py
Mon, 26 Nov 2018 15:36:51 +0300, by Pulkit Goyal
py3: replace str() with pycompat.bytestr() or ('%d' % int)
Fri, 23 Nov 2018 21:54:03 +0300, by Pulkit Goyal
perf: add a `--timing` argument to `perfhelper-tracecopies`
Fri, 23 Nov 2018 19:32:51 +0100, by Boris Feld
ui: manage logger instances and event filtering by core ui
Sun, 11 Nov 2018 18:08:33 +0900, by Yuya Nishihara
extensions: add "uipopulate" hook, called per instance, not per process
Mon, 12 Nov 2018 21:10:51 +0900, by Yuya Nishihara
hgweb: load globally-enabled extensions explicitly
Sat, 17 Nov 2018 19:11:45 +0900, by Yuya Nishihara
tests: sniff for libfuzzer actually being available in test-fuzz-targets.t stable
Wed, 14 Nov 2018 10:12:43 -0500, by Augie Fackler
tests: sniff for /usr/local/bin/gmake and use it in test-fuzz-targets.t stable
Wed, 14 Nov 2018 10:11:37 -0500, by Augie Fackler
tests: stabilize test-inherit-mode.t on FreeBSD and macOS (issue6026) stable
Thu, 29 Nov 2018 16:25:37 -0500, by Augie Fackler
wireprotov2peer: wait for initial object before resolving future stable
Wed, 28 Nov 2018 12:52:23 -0800, by Gregory Szorc
wireprotov2peer: always return a bool from _processredirect() stable
Wed, 28 Nov 2018 10:37:43 -0800, by Gregory Szorc
tests: disable remotefilelog on Windows
Sat, 24 Nov 2018 14:11:02 -0500, by Matt Harbison
perf: run 'setup' function during stub run
Thu, 22 Nov 2018 23:48:44 +0100, by Boris Feld
perf: fallback to subset if ondisk cache is missing in perfbranchmapload
Fri, 23 Nov 2018 02:08:01 +0100, by Boris Feld
perf: prewarm the branchmap in perfbranchmapload
Fri, 23 Nov 2018 02:11:11 +0100, by Boris Feld
localrepo: correct docstring of filectx()
Sun, 25 Nov 2018 22:39:54 +0900, by Yuya Nishihara
annotate: remove dead code to not convert path to relative path
Sat, 24 Nov 2018 20:05:55 +0900, by Yuya Nishihara
annotate: start pager soon after command options are validated
Sat, 24 Nov 2018 18:41:44 +0900, by Yuya Nishihara
annotate: check and update command options first
Sat, 24 Nov 2018 18:38:44 +0900, by Yuya Nishihara
annotate: format local tables in less-dense form
Sat, 24 Nov 2018 18:36:44 +0900, by Yuya Nishihara
perf: rename version flag of perfchangegroupchangelog to cgversion
Thu, 22 Nov 2018 18:14:21 +0300, by Pulkit Goyal
procutil: don't allow the main 'hg' script to be treated as the Windows exe
Fri, 23 Nov 2018 22:27:57 -0500, by Matt Harbison
remotefilelog: drop some compatibility cruft for finding the hg exeutable
Fri, 23 Nov 2018 22:18:56 -0500, by Matt Harbison
branchmap: build the revbranchcache._namesreverse() only when required
Wed, 21 Nov 2018 17:17:26 +0300, by Pulkit Goyal
sparse-revlog: put the native implementation of slicechunktodensity to use
Thu, 15 Nov 2018 11:11:38 +0100, by Boris Feld
cext: increment the `parsers` module version
Thu, 15 Nov 2018 11:10:52 +0100, by Boris Feld
sparse-revlog: introduce native (C) implementation of slicechunktodensity
Thu, 15 Nov 2018 11:09:58 +0100, by Boris Feld
sparse-revlog: add a `trim_endidx` function in C
Fri, 09 Nov 2018 18:45:23 +0100, by Boris Feld
sparse-revlog: add a `index_segment_span` function in C
Fri, 09 Nov 2018 18:43:16 +0100, by Boris Feld
sparse-revlog: add a `index_get_length` function in C
Fri, 09 Nov 2018 18:42:58 +0100, by Boris Feld
sparse-revlog: add a `index_get_start` function in C
Tue, 20 Nov 2018 14:49:18 +0000, by Boris Feld
perf: add --clear-revlog flag to branchmapload
Fri, 23 Nov 2018 06:32:32 +0100, by Boris Feld
perf: introduce a function to fully "unload" a changelog
Fri, 23 Nov 2018 06:32:28 +0100, by Boris Feld
perf: use an explicit function in perfbranchmapload
Fri, 23 Nov 2018 01:32:57 +0100, by Boris Feld
perf: update function name to match `perfbranchmapload` command
Fri, 23 Nov 2018 01:20:18 +0100, by Boris Feld
perf: fix a minor typo in perfbranchmapload
Wed, 21 Nov 2018 11:46:47 +0000, by Boris Feld
context: floor adjustlinkrev graph walk during copy tracing
Wed, 10 Oct 2018 00:50:37 +0200, by Boris Feld
context: small refactoring of `isintroducedafter`
Mon, 19 Nov 2018 14:30:58 +0000, by Boris Feld
context: split `introrev` logic in a sub function
Wed, 10 Oct 2018 00:50:36 +0200, by Boris Feld
context: introduce an `isintroducedafter` method and use it in copies
Wed, 10 Oct 2018 00:50:35 +0200, by Boris Feld
context: take advantage of `_descendantrev` in introrev if available
Wed, 10 Oct 2018 00:50:34 +0200, by Boris Feld
context: spell out the logic around linkrev adjustement starting point
Wed, 10 Oct 2018 00:49:30 +0200, by Boris Feld
perf: add a new `perfhelper-tracecopies` command
Mon, 19 Nov 2018 14:14:56 +0000, by Boris Feld
narrow: extract helper for parsing narrowspec file
Fri, 21 Sep 2018 09:19:42 -0700, by Martin von Zweigbergk
py3: cast attribute name to sysstr in clearcachedproperty()
Thu, 22 Nov 2018 22:40:22 +0900, by Yuya Nishihara
py3: whitelist three more passing test caught by buildbot
Wed, 21 Nov 2018 19:12:12 +0300, by Pulkit Goyal
tests: make test-check-module-imports more robust
Wed, 21 Nov 2018 13:08:23 -0500, by Valentin Gatien-Baron
push: add --publish flag to change phase of pushed changesets
Sat, 27 Oct 2018 21:13:23 +0800, by Anton Shestakov
match: reformat `syntaxes` dictionary for better maintainability
Mon, 19 Nov 2018 17:19:54 +0000, by Boris Feld
match: provide and use a quick way to escape a single byte
Mon, 19 Nov 2018 18:54:44 +0000, by Boris Feld
perf: make `clearfilecache` helper work with any object
Mon, 19 Nov 2018 16:50:21 +0000, by Boris Feld
perf: move some of the perftags benchmark to the setup function
Tue, 20 Nov 2018 10:10:25 +0000, by Boris Feld
perf: use the new setup function in "perfbookmarks"
Mon, 19 Nov 2018 23:14:46 +0000, by Boris Feld
perf: add a `setup` argument to run code outside of the timed section
Mon, 19 Nov 2018 22:55:07 +0000, by Boris Feld
perf: explicitly pass title as a keyword argument in `perfdiffwd`
Mon, 19 Nov 2018 23:02:29 +0000, by Boris Feld
ui: unify argument name of ui.log()
Sun, 11 Nov 2018 17:59:23 +0900, by Yuya Nishihara
logtoprocess: extract logger class from ui wrapper
Sun, 11 Nov 2018 17:45:18 +0900, by Yuya Nishihara
merge with stable
Wed, 21 Nov 2018 21:40:16 +0900, by Yuya Nishihara
py3: use node.hex(m.digest()) instead of m.hexdigest()
Mon, 19 Nov 2018 21:12:13 +0300, by Pulkit Goyal
tests: stabilize the recent checkexec changes on Windows stable
Tue, 20 Nov 2018 18:47:19 -0500, by Matt Harbison
tests: add Balto configuration file
Sun, 18 Nov 2018 02:40:47 +0100, by Boris Feld
tests: make test-alias.t pass with re2
Mon, 19 Nov 2018 13:40:03 -0500, by Valentin Gatien-Baron
context: remove seemingly impossible code branch
Mon, 19 Nov 2018 23:08:09 -0800, by Martin von Zweigbergk
checkexec: create destination directory if necessary stable
Thu, 15 Nov 2018 03:09:23 +0100, by Boris Feld
py3: use pycompat.byteskwargs() to covert keys of kwargs to bytes
Mon, 19 Nov 2018 21:11:08 +0300, by Pulkit Goyal
py3: use '%d' for integers instead of '%s'
Mon, 19 Nov 2018 20:30:07 +0300, by Pulkit Goyal
py3: add 9 new passing tests caught by buildbot
Mon, 19 Nov 2018 19:57:11 +0300, by Pulkit Goyal
branch: allow changing branch of merge commits with --rev
Fri, 09 Nov 2018 13:57:13 +0800, by Anton Shestakov
lfs: ensure that the return of urlopener.open() is closed
Thu, 15 Nov 2018 22:28:38 -0500, by Matt Harbison
changegroup: avoid instantiating storage if we are not using it
Thu, 15 Nov 2018 11:16:42 -0800, by Kyle Lippincott
http: allow 'auth.prefix' to have a username consistent with the URI
Fri, 16 Nov 2018 17:56:36 -0500, by Matt Harbison
lfs: make the exception messages consistent
Thu, 15 Nov 2018 18:14:57 -0500, by Matt Harbison
lfs: handle URLErrors to add additional information
Thu, 15 Nov 2018 18:08:29 -0500, by Matt Harbison
lfs: improve the hints for common errors in the Batch API
Thu, 15 Nov 2018 17:58:59 -0500, by Matt Harbison
lfs: provide more Batch API error info via a hint in the raised exception
Thu, 15 Nov 2018 17:55:01 -0500, by Matt Harbison
scmutil: display the optional hint when handling StorageError in catchall()
Thu, 15 Nov 2018 17:50:14 -0500, by Matt Harbison
sparse-revlog: align endrevidx usages in the _slicechunktosize
Thu, 15 Nov 2018 14:57:26 +0100, by Boris Feld
graft: do not try to skip rev derived from ancestor more than once (issue6024) stable
Thu, 15 Nov 2018 22:59:38 +0900, by Yuya Nishihara
subrepo: print the status line before creating the peer for better diagnostics stable
Fri, 16 Nov 2018 18:37:26 -0500, by Matt Harbison
sparse-revlog: use `span` variable as intended
Thu, 15 Nov 2018 14:55:11 +0100, by Boris Feld
tests: stabilize test-commandserver.t on Windows
Thu, 15 Nov 2018 17:38:51 -0500, by Matt Harbison
histedit: conditionalize the imports of 'fcntl' and 'termios'
Thu, 15 Nov 2018 17:36:15 -0500, by Matt Harbison
logtoprocess: update commandfinish options arguments
Fri, 16 Nov 2018 14:21:47 +0100, by Boris Feld
rebase: fix two ui.logs to actually have text when using default blackbox log
Thu, 15 Nov 2018 13:16:46 -0800, by Kyle Lippincott
wireprotov2server: let repo.narrowmatch(match) do matcher intersection
Thu, 15 Nov 2018 11:22:32 -0800, by Martin von Zweigbergk
blackbox: extract function to test if log event is tracked
Sun, 11 Nov 2018 17:29:46 +0900, by Yuya Nishihara
blackbox: initialize inlog flag properly
Sun, 11 Nov 2018 17:25:34 +0900, by Yuya Nishihara
blackbox: initialize repo attribute properly
Sun, 11 Nov 2018 17:24:28 +0900, by Yuya Nishihara
blackbox: unindent "if True" block
Sun, 11 Nov 2018 17:22:14 +0900, by Yuya Nishihara
blackbox: extract logger class from ui wrapper
Sun, 11 Nov 2018 17:17:49 +0900, by Yuya Nishihara
blackbox: rename variables to prepare extracting core logic from ui wrapper
Sun, 11 Nov 2018 16:58:22 +0900, by Yuya Nishihara
sparse-revlog: rework the way we enforce chunk size limit
Fri, 09 Nov 2018 17:58:37 +0100, by Boris Feld
doctest: add a `issnapshot` method to _testrevlog
Tue, 13 Nov 2018 15:06:29 +0100, by Boris Feld
tests: add `revlogutils.deltas` module to doctests
Tue, 13 Nov 2018 14:41:04 +0100, by Boris Feld
merge with stable
Thu, 15 Nov 2018 20:20:31 +0900, by Yuya Nishihara
mergetools: adjust Beyond Compare config on Mac/Linux
Mon, 05 Nov 2018 22:58:19 +0100, by joco
tests: allow for 100% of profiled time in sleep in test-profile.t stable
Wed, 14 Nov 2018 11:52:13 -0500, by Augie Fackler
rewriteutil: move publicrevs closer to where it's used
Wed, 14 Nov 2018 15:05:38 +0800, by Anton Shestakov
requires: use atomictemp=True when writing .hg/requires
Wed, 14 Nov 2018 11:30:46 -0800, by Martin von Zweigbergk
blackbox: extract _log() function which is called after lastui is resolved
Sun, 11 Nov 2018 16:47:28 +0900, by Yuya Nishihara
blackbox: inline temporary variables which are referenced only once
Sun, 11 Nov 2018 16:44:30 +0900, by Yuya Nishihara
blackbox: simply update global lastui variable at once
Sun, 11 Nov 2018 16:43:29 +0900, by Yuya Nishihara
blackbox: consolidate conditions for early return
Sun, 11 Nov 2018 16:38:43 +0900, by Yuya Nishihara
blackbox: remove redundant check for unassigned repo
Sun, 11 Nov 2018 16:34:49 +0900, by Yuya Nishihara
tests: fix bytes/str issue I introduced when adding this test
Wed, 14 Nov 2018 10:15:28 -0500, by Augie Fackler
shelve: use matcher to restrict prefetch to just the modified files
Tue, 13 Nov 2018 17:14:47 -0800, by Kyle Lippincott
revlog: automatically read from opened file handles
Tue, 13 Nov 2018 12:32:05 -0800, by Gregory Szorc
revlog: detect incomplete revlog reads
Tue, 13 Nov 2018 12:30:59 -0800, by Gregory Szorc
revlog: use single file handle when de-inlining revlog
Tue, 30 Oct 2018 16:50:05 -0700, by Gregory Szorc
store: raise ProgrammingError if unable to decode a storage path
Tue, 13 Nov 2018 18:44:09 +0300, by Pulkit Goyal
tests: document a known failing interaction between narrow and lfs
Tue, 13 Nov 2018 23:54:23 -0500, by Matt Harbison
logtoprocess: drop support for ui.log() call with invalid msg arguments (BC)
Sun, 11 Nov 2018 12:55:58 +0900, by Yuya Nishihara
py3: byte-stringify inline extension in test-logtoprocess.t
Sun, 11 Nov 2018 12:35:38 +0900, by Yuya Nishihara
logtoprocess: rewrite dict building in py3-compatible way
Sun, 11 Nov 2018 12:33:14 +0900, by Yuya Nishihara
logtoprocess: leverage procutil.shellenviron() to stringify variables (BC)
Sun, 11 Nov 2018 12:27:23 +0900, by Yuya Nishihara
templater: check invalid use of list expression properly (issue5920)
Tue, 13 Nov 2018 22:15:30 +0900, by Yuya Nishihara
copystore: provide unit to ui.makeprogress() stable
Wed, 14 Nov 2018 15:06:21 +0800, by Anton Shestakov
verify: provide unit to ui.makeprogress() stable
Wed, 14 Nov 2018 15:07:02 +0800, by Anton Shestakov
tests: fix wireproto redirection test on systems without tls1.2 stable
Tue, 13 Nov 2018 19:47:48 -0500, by Augie Fackler
py3: add b suffix to make sure file is opened in bytes mode
Tue, 13 Nov 2018 18:08:55 +0300, by Pulkit Goyal
py3: don't use dict.iterkeys()
Tue, 13 Nov 2018 18:08:17 +0300, by Pulkit Goyal
py3: use node.hex(h.digest()) instead of h.hexdigest()
Tue, 13 Nov 2018 18:07:21 +0300, by Pulkit Goyal
py3: make second argument of fdopen() a str
Tue, 13 Nov 2018 17:41:54 +0300, by Pulkit Goyal
py3: fix keyword arguments handling in hgext/remotefilelog/
Tue, 13 Nov 2018 17:41:26 +0300, by Pulkit Goyal
py3: add __pycache__ to .hgignore
Sat, 13 Oct 2018 05:09:18 +0300, by Pulkit Goyal
sparse-revlog: stop using a heap to track selected gap
Thu, 08 Nov 2018 16:07:16 +0100, by Boris Feld
sparse-revlog: stop using a heap to track gaps
Thu, 08 Nov 2018 16:01:30 +0100, by Boris Feld
sparse-revlog: fast-path before computing payload size
Thu, 08 Nov 2018 15:29:58 +0100, by Boris Feld
sparse-revlog: drop unused deltainfo parameter from segmentspan
Tue, 16 Oct 2018 14:46:28 +0200, by Boris Feld
sparse-revlog: drop unused deltainfo parameter from _slicechunktodensity
Tue, 16 Oct 2018 14:43:51 +0200, by Boris Feld
sparse-revlog: skip the span check in the sparse-revlog case
Mon, 15 Oct 2018 15:45:08 +0200, by Boris Feld
histedit: import chistedit curses UI from hg-experimental
Wed, 17 Oct 2018 17:15:42 -0400, by Augie Fackler
manifest: perform cheap checks before potentially allocating memory
Mon, 12 Nov 2018 20:32:58 -0500, by Augie Fackler
manifest: also reject obviously-too-short lines when parsing lines
Mon, 12 Nov 2018 20:31:57 -0500, by Augie Fackler
manifest: make sure there's a filename before bothering to look for newline
Mon, 12 Nov 2018 20:35:22 -0500, by Augie Fackler
revlog: replace PyInt_AS_LONG with a more portable helper function
Tue, 06 Nov 2018 11:12:56 -0500, by Augie Fackler
help: document weird behavior of uisetup()
Mon, 12 Nov 2018 22:51:36 +0900, by Yuya Nishihara
help: merge section about uisetup() and extsetup()
Mon, 12 Nov 2018 22:26:24 +0900, by Yuya Nishihara
help: add internals.extensions topic
Mon, 12 Nov 2018 21:28:54 +0900, by Yuya Nishihara
commandserver: send raw progress information to message channel
Sun, 04 Nov 2018 12:51:14 +0900, by Yuya Nishihara
commandserver: make getpass() request distinct from normal prompt
Sun, 04 Nov 2018 12:38:49 +0900, by Yuya Nishihara
commandserver: attach prompt default and choices to message
Sun, 04 Nov 2018 12:17:20 +0900, by Yuya Nishihara
test-commandserver: clean up quoting and location of dbgui extension
Thu, 08 Nov 2018 22:25:04 +0900, by Yuya Nishihara
ui: extract helpers to write message with type or label
Sun, 18 Jan 2015 17:55:28 +0900, by Yuya Nishihara
commandserver: add experimental option to use separate message channel
Sun, 18 Jan 2015 18:49:59 +0900, by Yuya Nishihara
commandserver: fix reference before assignment error in pipeservice cleanup
Wed, 07 Nov 2018 22:37:51 +0900, by Yuya Nishihara
dispatch: pass around ui.fmsg channel
Sun, 18 Jan 2015 18:43:23 +0900, by Yuya Nishihara
test-subrepo: document why share magically works even if subrepos are missing
Sat, 10 Nov 2018 12:01:21 +0900, by Yuya Nishihara
packaging: add Fedora 29 target
Sun, 11 Nov 2018 14:13:08 -0500, by Augie Fackler
store: pass in decoded filename to narrow matcher
Sat, 10 Nov 2018 11:52:32 +0900, by Yuya Nishihara
test-narrow-clone-stream: include no usefncache case which is broken
Sat, 10 Nov 2018 11:47:36 +0900, by Yuya Nishihara
test-narrow-clone-stream: include uppercase letter in filename
Sat, 10 Nov 2018 11:36:22 +0900, by Yuya Nishihara
phase: use the `phases.cmdphasenames` constant to walk available command flags
Sat, 10 Nov 2018 13:37:18 -0500, by Matt Harbison
phases: add a list of names usable by the phase command
Fri, 09 Nov 2018 23:19:53 -0500, by Matt Harbison
transaction: display data about why the transaction failed to rollback
Wed, 07 Nov 2018 19:59:38 +0100, by Boris Feld
merge with stable
Sat, 10 Nov 2018 12:07:26 +0900, by Yuya Nishihara
remotefilelog: avoid accessing repo instance after dispatch
Fri, 09 Nov 2018 10:47:24 -0800, by Martin von Zweigbergk
share: avoid a now-unnecessary reload of the repo
Fri, 09 Nov 2018 11:28:05 -0800, by Martin von Zweigbergk
share: reload repo after adjusting it in postshare()
Fri, 09 Nov 2018 10:46:02 -0800, by Martin von Zweigbergk
tests: don't load strip extension via mq extension for remotefilelog tests
Fri, 09 Nov 2018 09:36:16 -0800, by Martin von Zweigbergk
remotefilelog: remove unused configs for {data,history}pack version
Fri, 09 Nov 2018 09:35:05 -0800, by Martin von Zweigbergk
tests: remove obsolete PYTHONPATH override from remotefilelog tests
Fri, 09 Nov 2018 09:27:37 -0800, by Martin von Zweigbergk
tests: drop obsolete "hginit" alias in remotefilelog tests
Fri, 09 Nov 2018 08:19:08 -0800, by Martin von Zweigbergk
fix: add extra field to fixed revisions to avoid creating obsolescence cycles
Thu, 08 Nov 2018 12:35:26 -0800, by Danny Hooper
cleanup: use revision numbers instead of hashes in test output
Thu, 08 Nov 2018 12:29:56 -0800, by Danny Hooper
tests: make the commands.resolve.confirm tests not pollute the test-wide hgrc
Wed, 07 Nov 2018 15:42:56 -0800, by Kyle Lippincott
tests: fix a couple typos in test-resolve.t comments and add a comment
Wed, 07 Nov 2018 15:41:18 -0800, by Kyle Lippincott
fix: add suboption for configuring execution order of tools
Tue, 06 Nov 2018 15:50:41 -0800, by Danny Hooper
tests: fix up some import statements caught by Python 3
Wed, 07 Nov 2018 14:21:39 -0500, by Augie Fackler
tests: replace `tac` reimplementation by `sort -r`
Wed, 07 Nov 2018 10:29:38 -0800, by Martin von Zweigbergk
tests: work around `tac` not being portable
Wed, 07 Nov 2018 12:15:36 -0500, by Augie Fackler
revlog: give formatting to clang-format
Tue, 06 Nov 2018 11:22:16 -0500, by Augie Fackler
revlog: add blank line in comment to help clang-format
Tue, 06 Nov 2018 11:19:35 -0500, by Augie Fackler
revlog: add a comment to help clang-format produce less-awful results
Tue, 06 Nov 2018 11:18:12 -0500, by Augie Fackler
py3: ratchet caught two more passing tests
Tue, 06 Nov 2018 11:52:41 -0500, by Augie Fackler
perf: add a lazydeltabase option to perfrevlogwrite
Mon, 05 Nov 2018 15:57:31 +0100, by Boris Feld
perf: add `storage` as possible source for perfrevlogwrite
Mon, 05 Nov 2018 15:24:09 +0100, by Boris Feld
perf: add `parent-smallest` as possible source for perfrevlogwrite
Mon, 05 Nov 2018 15:19:44 +0100, by Boris Feld
perf: add `parent-2` as possible source for perfrevlogwrite
Mon, 05 Nov 2018 15:15:18 +0100, by Boris Feld
perf: add `parent-1` as possible source for perfrevlogwrite
Mon, 05 Nov 2018 15:15:02 +0100, by Boris Feld
perf: add the notion of "source" to perfrevlogwrite
Fri, 19 Oct 2018 17:23:29 +0200, by Boris Feld
perf: only display the total time for perfrevlogwrite if quiet
Tue, 06 Nov 2018 00:57:34 +0100, by Boris Feld
perf: offer full details in perfrevlogwrite
Wed, 03 Oct 2018 11:04:57 +0200, by Boris Feld
perf: introduce a perfrevlogwrite command
Wed, 03 Oct 2018 10:53:29 +0200, by Boris Feld
tests: fix config knob in test-narrow-clone-stream.t
Tue, 06 Nov 2018 10:41:00 -0500, by Augie Fackler
remotefilelog: fix various whitespace issues in docstring
Tue, 06 Nov 2018 10:26:33 -0500, by Augie Fackler
ui: add config knob to redirect status messages to stderr (API)
Sat, 03 Nov 2018 19:42:50 +0900, by Yuya Nishihara
phabricator: ensure the command summaries are available in extension help stable
Sat, 10 Nov 2018 22:25:12 -0500, by Matt Harbison
hgweb: cast bytearray to bytes stable
Fri, 09 Nov 2018 23:49:39 +0000, by Gregory Szorc
help: unjumble the list of default config values for `internals.config` stable
Thu, 08 Nov 2018 20:04:07 -0500, by Matt Harbison
ui: hide fin/fout/ferr attributes behind @property functions
Sat, 03 Nov 2018 20:53:31 +0900, by Yuya Nishihara
ui: label prompt and echo messages
Sun, 18 Jan 2015 17:42:53 +0900, by Yuya Nishihara
ui: add inner function to select write destination
Sat, 03 Nov 2018 18:17:30 +0900, by Yuya Nishihara
ui: remove _write() and _write_err() functions
Sat, 03 Nov 2018 18:04:22 +0900, by Yuya Nishihara
ui: move pre/post processes from low-level write()s to _writenobuf()
Sat, 03 Nov 2018 18:03:09 +0900, by Yuya Nishihara
ui: pass in file object to _writenobuf()
Sat, 03 Nov 2018 17:56:17 +0900, by Yuya Nishihara
perf: fix perfrevlogrevisions --reverse
Mon, 05 Nov 2018 17:24:39 +0100, by Boris Feld
procutil: import concerns about creationflags on Windows from D1701
Tue, 06 Nov 2018 11:54:15 +0100, by Boris Feld
localrepo: extract loading of hgrc files to standalone function
Mon, 05 Nov 2018 14:14:32 -0800, by Gregory Szorc
revsets: make bookmark/named('re:nonexistent') not abort (issue6018) (BC)
Mon, 05 Nov 2018 09:09:48 -0800, by Martin von Zweigbergk
fix: rename :fileset subconfig to :pattern
Mon, 05 Nov 2018 16:05:45 -0800, by Danny Hooper
fix: add a config to abort when a fixer tool fails
Wed, 31 Oct 2018 13:11:51 -0700, by Danny Hooper
perf: measure slicing time in perfrevlogrevision
Tue, 06 Nov 2018 11:05:13 +0100, by Boris Feld
perf: teach perfrevlogrevision about sparse reading
Tue, 06 Nov 2018 11:04:23 +0100, by Boris Feld
perf: use the same timer for all section of perfrevlogrevision
Tue, 06 Nov 2018 11:13:31 +0100, by Boris Feld
obsutil: clarify the access to "repo"
Tue, 22 May 2018 15:26:17 +0200, by Boris Feld
pycompat: adding Linux detection and fixing Mac
Mon, 05 Nov 2018 19:52:42 -0800, by rdamazio
remotefilelog: fix various minor py3 problems
Mon, 05 Nov 2018 17:48:23 -0500, by Augie Fackler
remotefilelog: rip out a missed mention of lz4
Mon, 05 Nov 2018 17:37:37 -0500, by Augie Fackler
ui: wrap whole _write() block with timeblockedsection
Sat, 03 Nov 2018 17:47:23 +0900, by Yuya Nishihara
ui: indent _writenobuf() to prepare moving bits from _write() functions
Sat, 03 Nov 2018 17:43:57 +0900, by Yuya Nishihara
ui: simply concatenate messages before applying color labels
Sat, 03 Nov 2018 17:42:05 +0900, by Yuya Nishihara
ui: simplify interface of low-level write() functions
Sat, 03 Nov 2018 17:36:10 +0900, by Yuya Nishihara
ui: factor out function that writes data to fout/ferr with labeling
Sat, 03 Nov 2018 17:32:35 +0900, by Yuya Nishihara
ui: consolidate places where _progclear() is called
Sat, 03 Nov 2018 16:04:16 +0900, by Yuya Nishihara
templater: compute revset lazily
Sun, 04 Nov 2018 20:44:26 +0900, by Yuya Nishihara
remotefilelog: drop compat code for "getbundle_shallow" wireprotocol command
Wed, 24 Oct 2018 18:48:43 +0300, by Pulkit Goyal
tests: remove lz4 as dependency while running tests
Wed, 24 Oct 2018 17:54:34 +0300, by Pulkit Goyal
remotefilelogserver: add a matcher argument to _walkstreamfiles()
Wed, 24 Oct 2018 17:51:49 +0300, by Pulkit Goyal
shallowutil: introduce a helper function isenabled()
Mon, 05 Nov 2018 11:52:10 -0800, by Pulkit Goyal
remotefilelog: remove some BC code related to streamclone
Wed, 24 Oct 2018 16:59:05 +0300, by Pulkit Goyal
remotefilelog: add some docstring
Wed, 17 Oct 2018 09:12:29 -0400, by Augie Fackler
remotefilelog: rename wireproto methods and remaining capabilities
Thu, 04 Oct 2018 10:03:10 -0400, by Augie Fackler
remotefilelog: consolidate and rename on-disk store requirement
Tue, 16 Oct 2018 17:02:48 -0400, by Augie Fackler
remotefilelog: consolidate and rename bundle2 capability
Tue, 16 Oct 2018 17:30:47 -0400, by Augie Fackler
remotefilelog: rename capability for legacy ssh file fetching method
Tue, 16 Oct 2018 16:38:40 -0400, by Augie Fackler
remotefilelog: rip out lz4 support
Thu, 04 Oct 2018 00:11:37 -0400, by Augie Fackler
remotefilelog: bump pack file formats to version 2
Wed, 03 Oct 2018 23:25:31 -0400, by Augie Fackler
remotefilelog: avoid hard-coding pack names in tests
Wed, 03 Oct 2018 23:47:43 -0400, by Augie Fackler
remotefilelog: remove now-unused wirepack code
Tue, 16 Oct 2018 14:04:41 -0400, by Augie Fackler
remotefilelogserver: remove pack-serving functionality
Tue, 16 Oct 2018 14:04:11 -0400, by Augie Fackler
remotefilelog: remove support for fetching packs
Tue, 16 Oct 2018 13:17:16 -0400, by Augie Fackler
remotefilelog: jettison example cache client
Wed, 03 Oct 2018 17:20:44 -0400, by Augie Fackler
remotefilelog: prune obsolete method
Wed, 03 Oct 2018 17:18:20 -0400, by Augie Fackler
logtoprocess: use new runbgcommand from procutil
Wed, 03 Oct 2018 14:01:22 -0400, by Augie Fackler
procutil: port over windows encoding fixes from logtoprocess
Tue, 16 Oct 2018 14:42:57 -0400, by Augie Fackler
remotefilelog: transplant runbgcommand to procutil
Wed, 03 Oct 2018 14:01:04 -0400, by Augie Fackler
remotefilelog: remove function that was described as deprecated
Wed, 03 Oct 2018 13:54:45 -0400, by Augie Fackler
remotefilelog: import pruned-down remotefilelog extension from hg-experimental
Thu, 27 Sep 2018 13:03:19 -0400, by Augie Fackler
store: introduce _matchtrackedpath() and use it to filter store files
Wed, 17 Oct 2018 17:42:32 +0300, by Pulkit Goyal
narrow: only send includepats and excludepats if they are not empty
Wed, 17 Oct 2018 17:24:55 +0300, by Pulkit Goyal
exchange: pass includepats and excludepats as arguments to getbundle()
Tue, 16 Oct 2018 17:53:26 +0300, by Pulkit Goyal
catapult: add a bit more documentation on how to use catapult tracing
Thu, 01 Nov 2018 16:51:21 -0700, by Kyle Lippincott
catapult: introduce HGTESTCATAPULTSERVERPIPE to control run-tests' tracing
Thu, 01 Nov 2018 16:44:02 -0700, by Kyle Lippincott
catapult: rename 'active' to 'activetrace'; this isn't storing a boolean state
Thu, 01 Nov 2018 16:44:37 -0700, by Kyle Lippincott
catapult: fix broken run-tests catapult tracing
Thu, 01 Nov 2018 16:44:32 -0700, by Kyle Lippincott
test: fix self._testdir to use the right mercurial library during testing
Sat, 03 Nov 2018 23:24:15 +0530, by Sangeet Kumar Mishra
tests: conditonalize a difference in test-merge-tools.t on Windows
Sat, 03 Nov 2018 20:50:04 -0400, by Matt Harbison
statprof: clean up unicode/bytes a little
Thu, 01 Nov 2018 17:12:22 -0400, by Augie Fackler
statprof: add a couple of asserts to avoid storing unicodes
Thu, 01 Nov 2018 17:11:31 -0400, by Augie Fackler
tests: add some helpful `|| cat` bits to test-profile.t
Thu, 01 Nov 2018 17:09:55 -0400, by Augie Fackler
tests: skip wireproto clientreactor tests on Python 3.6.0-3.6.3 inclusive
Thu, 01 Nov 2018 16:13:01 -0400, by Augie Fackler
contrib: tweak import-checker to always use bytes for module names
Thu, 01 Nov 2018 15:58:01 -0400, by Augie Fackler
contrib: fix import-checker to not b'' module names on Python 3
Thu, 01 Nov 2018 15:43:43 -0400, by Augie Fackler
tests: add a critical flush() to run-tests.py to make output stable on py3
Thu, 01 Nov 2018 15:47:26 -0400, by Augie Fackler
merge-tools: when calling external merge tool, describe the resolve inputs
Sat, 13 Oct 2018 07:49:20 -0700, by Kyle Lippincott
templatekw: deprecate p1rev/p2rev/p1node/p2node in favor of p1/p2
Fri, 26 Oct 2018 21:46:37 +0900, by Yuya Nishihara
templatekw: add p1/p2 keywords which switches the current ctx
Fri, 26 Oct 2018 21:43:20 +0900, by Yuya Nishihara
templater: add wrapper for a single template mapping
Fri, 19 Oct 2018 21:11:30 +0900, by Yuya Nishihara
templatekw: extract internal "{rev}:{node|formatnode}" template to constant
Fri, 26 Oct 2018 21:28:20 +0900, by Yuya Nishihara
tweakdefaults: remove commands.resolve.mark-check=abort, it is too broken stable
Mon, 05 Nov 2018 15:01:45 -0800, by Kyle Lippincott
resolve: when resolve.mark-check=abort, downgrade to warning if pats specified stable
Fri, 02 Nov 2018 11:57:45 -0700, by Kyle Lippincott
test: remove changes preparing the drop of `HGMERGE`
Thu, 01 Nov 2018 14:35:18 +0100, by Boris Feld
run-tests: define the default merge tool through configuration
Thu, 01 Nov 2018 14:29:21 +0100, by Boris Feld
run-tests: explicitly declare the list of dropped environment variable
Fri, 19 Oct 2018 01:52:16 +0200, by Boris Feld
test: drop usage of `HGMERGE` in `test-lfconvert.t`
Thu, 01 Nov 2018 14:29:14 +0100, by Boris Feld
test: drop usage of `HGMERGE` in `test-merge-types.t`
Thu, 01 Nov 2018 14:26:30 +0100, by Boris Feld
test: use the "correct" merge tool in `test-rebase-detach.t`
Thu, 01 Nov 2018 14:24:34 +0100, by Boris Feld
test: also deactivate `ui.merge` when testing merge tool
Wed, 31 Oct 2018 19:12:32 +0100, by Boris Feld
tests: adjust merge tool config in test-largefiles-update.t
Wed, 31 Oct 2018 18:43:56 +0100, by Boris Feld
extensions: include current version in "invalid version" message
Fri, 20 Apr 2018 18:08:54 +0200, by Boris Feld
obsolete: prefetch the repo.obsstore used in phasedivergence loop
Fri, 19 Oct 2018 01:07:08 +0200, by Boris Feld
obsutil: prefetch method in allpredecessors loop
Fri, 19 Oct 2018 00:53:18 +0200, by Boris Feld
merge with stable
Fri, 02 Nov 2018 14:24:29 -0400, by Augie Fackler
Added signature for changeset a91a2837150b stable
Fri, 02 Nov 2018 14:18:29 -0400, by Augie Fackler
Added tag 4.8 for changeset a91a2837150b stable
Fri, 02 Nov 2018 14:18:26 -0400, by Augie Fackler
beautifygraph: don't substitute anything for 'X' in rendered graphs
Sat, 13 Oct 2018 01:55:40 -0700, by Danny Hooper
py3: do not stringify integers in revlog stats by '%s'
Wed, 24 Oct 2018 21:29:04 +0900, by Yuya Nishihara
py3: convert revlog stats to a dict of (bytes, int) pairs
Wed, 24 Oct 2018 21:28:03 +0900, by Yuya Nishihara
rust: fix signature of rustlazyancestors_init() function stable 4.8
Sun, 28 Oct 2018 21:16:36 +0900, by Yuya Nishihara
tests: require SQLite 3.8.3+ as sqlitestore relies on "WITH" clause stable
Fri, 02 Nov 2018 21:25:35 +0900, by Yuya Nishihara
relnotes: various tweaks for release notes stable
Fri, 19 Oct 2018 22:09:53 +0800, by Anton Shestakov
delta: skip "empty delta" optimisation for non-general case (issue6006) stable
Thu, 01 Nov 2018 12:52:16 +0100, by Boris Feld
narrow: fix copies._fullcopytracing() narrowspec filtering in graft case stable
Thu, 01 Nov 2018 16:32:16 -0700, by Martin von Zweigbergk
tests: demonstrate broken copies._fullcopytracing() stable
Thu, 01 Nov 2018 16:28:11 -0700, by Martin von Zweigbergk
narrow: make copies.pathcopies() filter with narrowspec again stable
Thu, 01 Nov 2018 13:20:12 -0700, by Martin von Zweigbergk
tests: demonstrate broken copies.pathcopies() stable
Thu, 01 Nov 2018 11:24:45 -0700, by Martin von Zweigbergk
setup: explain to distutils how we write rc versions stable
Wed, 31 Oct 2018 20:32:42 +0100, by Paul Morelle
changegroup: restore default node ordering (issue6001) stable
Wed, 31 Oct 2018 12:08:37 -0700, by Boris Feld
changegroup: introduce an explicit linear sorting stable
Mon, 29 Oct 2018 17:26:25 +0100, by Boris Feld
py3: roll up threading.Thread constructor args into **kwargs
Thu, 25 Oct 2018 22:13:22 -0400, by Matt Harbison
tests: glob over a single quote vs double quote difference on Windows
Thu, 25 Oct 2018 21:04:47 -0400, by Matt Harbison
py3: port test-log-exthook.t to Python 3
Tue, 23 Oct 2018 11:31:33 -0400, by Augie Fackler
extensions: fix up many many debug logs that use %r
Fri, 12 Oct 2018 12:30:47 -0400, by Augie Fackler
blackbox: add configitem for format of log timestamps
Wed, 17 Oct 2018 15:48:01 -0700, by Matt DeVore
narrow: replace filtering in list comprehension by set operations
Tue, 23 Oct 2018 14:04:17 -0700, by Martin von Zweigbergk
storage: update sqlitestore to use the new `deltamode` parameter
Tue, 23 Oct 2018 19:20:22 +0200, by Boris Feld
narrow: rework logic to check whether we need to widen and narrow
Tue, 23 Oct 2018 16:24:04 +0300, by Pulkit Goyal
tests: show that adding an already included path still calls narrow_widen()
Tue, 23 Oct 2018 14:26:17 +0300, by Pulkit Goyal
graft: introduce --base option for using custom base revision while merging
Sun, 14 Oct 2018 17:08:18 +0200, by Mads Kiilerich
changegroup: add a option to create bundle with full snapshot only
Thu, 18 Oct 2018 12:31:06 +0200, by Boris Feld
changegroup: allow to force delta to be against p1
Wed, 10 Oct 2018 00:21:02 +0200, by Boris Feld
fix: disable use of thread-based worker stable
Wed, 31 Oct 2018 21:16:54 +0900, by Yuya Nishihara
storage: also use `deltamode argument` for ifiledata
Tue, 09 Oct 2018 23:26:35 +0200, by Boris Feld
configitems: rename the config to prevent adding an alias in future stable
Wed, 31 Oct 2018 15:27:06 +0300, by Pulkit Goyal
sparse-revlog: only refine delta candidates in the sparse case (issue6006) stable
Wed, 31 Oct 2018 11:02:08 +0100, by Boris Feld
changegroup: refactor emitrevision to use a `deltamode` argument
Tue, 09 Oct 2018 22:02:01 +0200, by Boris Feld
http: work around custom http client classes that refuse extra attrs stable
Mon, 29 Oct 2018 16:23:42 -0400, by Augie Fackler
branchmap: do not specify changelog as an argument
Tue, 23 Oct 2018 21:11:13 +0900, by Yuya Nishihara
filecache: unimplement __set__() and __delete__() (API)
Sat, 20 Oct 2018 17:56:00 +0900, by Yuya Nishihara
filecache: use try-except for faster __dict__ lookup
Sat, 20 Oct 2018 19:13:05 +0900, by Yuya Nishihara
crecord: make nextsametype() check that parent item exists (issue6009) stable
Thu, 25 Oct 2018 21:33:43 +0800, by Anton Shestakov
help: describe what ui.tweakdefaults changes, concretely stable
Wed, 24 Oct 2018 10:05:13 -0400, by Valentin Gatien-Baron
logexchange: convert paths to unix when detecting the active path stable
Thu, 25 Oct 2018 00:22:42 -0400, by Matt Harbison
help: update the default value specified for `profiling.time-track` stable
Wed, 24 Oct 2018 22:40:48 -0400, by Matt Harbison
profiling: revert the default mode back to 'cpu' on Windows stable
Wed, 24 Oct 2018 22:24:10 -0400, by Matt Harbison
phase: add an archived phase stable
Wed, 17 Oct 2018 14:47:01 +0200, by Boris Feld
exewrapper: apply clang-format to silence test-check-clang-format.t stable
Tue, 23 Oct 2018 20:46:21 +0900, by Yuya Nishihara
help: displaying extension commands by default
Thu, 18 Oct 2018 19:57:30 -0700, by rdamazio
help: displaying documented aliases by default
Thu, 18 Oct 2018 19:57:05 -0700, by rdamazio
help: allow hiding of help topics
Sat, 13 Oct 2018 05:43:39 -0700, by rdamazio
help: allow commands to be hidden
Sat, 13 Oct 2018 05:02:55 -0700, by rdamazio
py3: add one more passing test to whitelist
Sat, 20 Oct 2018 00:12:20 +0300, by Pulkit Goyal
py3: make sure we pass sysstr in sqlite3.connect()
Sat, 20 Oct 2018 00:05:50 +0300, by Pulkit Goyal
archive: use manifest.matches() to simplify and speed up matching
Tue, 05 Sep 2017 15:24:25 -0700, by Martin von Zweigbergk
archive: create alwaysmatcher when no matcher provided
Tue, 05 Sep 2017 15:24:22 -0700, by Martin von Zweigbergk
archive: change "matcnfn" argument to a real matcher
Tue, 05 Sep 2017 15:21:21 -0700, by Martin von Zweigbergk
Added signature for changeset 956ec6f1320d stable
Mon, 22 Oct 2018 14:48:14 -0400, by Augie Fackler
Added tag 4.8rc0 for changeset 956ec6f1320d stable
Mon, 22 Oct 2018 14:48:11 -0400, by Augie Fackler
merge to stable for 4.8 release freeze stable 4.8rc0
Mon, 22 Oct 2018 14:46:06 -0400, by Augie Fackler
shortest: never emit 0-length prefix even if unique
Mon, 22 Oct 2018 11:34:35 -0700, by Martin von Zweigbergk
logtoprocess: sends the canonical command name to the subprocess
Mon, 22 Oct 2018 15:51:01 +0200, by Boris Feld
logtoprocess: fix message formatting
Mon, 22 Oct 2018 15:47:30 +0200, by Boris Feld
profiling: move default mode to "real" time
Sat, 18 Aug 2018 01:44:38 +0200, by Boris Feld
streamclone: abort when client needs to handle obsmarkers, but doesn't
Fri, 05 Oct 2018 23:40:12 +0800, by Anton Shestakov
streamclone: include obsstore file into stream bundle if client can read it
Fri, 05 Oct 2018 23:27:17 +0800, by Anton Shestakov
setup: build exewrapper with Unicode support on py3
Fri, 19 Oct 2018 18:34:42 -0400, by Matt Harbison
exewrapper: convert to _tcsxxx functions for Unicode compatability
Fri, 19 Oct 2018 18:32:13 -0400, by Matt Harbison
exewrapper: drop an unused variable
Fri, 19 Oct 2018 18:23:14 -0400, by Matt Harbison
commands: restore compatibility for "^cmd" registration (issue6005)
Thu, 18 Oct 2018 21:14:22 +0900, by Yuya Nishihara
exchangev2: support fetching shallow files history
Fri, 19 Oct 2018 12:30:49 +0200, by Gregory Szorc
sqlitestore: support for storing revisions without their parents
Wed, 17 Oct 2018 17:32:15 +0200, by Gregory Szorc
wireprotov2: support exposing linknode of file revisions
Fri, 19 Oct 2018 15:38:25 +0200, by Gregory Szorc
localrepo: support marking repos as having shallow file storage
Fri, 19 Oct 2018 14:59:03 +0200, by Gregory Szorc
repository: teach addgroup() to receive data with missing parents
Wed, 26 Sep 2018 14:41:15 -0700, by Gregory Szorc
commands: support passing depth to hg.clone()
Fri, 19 Oct 2018 13:44:25 +0200, by Gregory Szorc
filelog: add a hasnode() method (API)
Wed, 03 Oct 2018 14:57:29 -0700, by Gregory Szorc
lfs: consult the narrow matcher when extracting pointers from ctx (issue5794)
Sun, 21 Oct 2018 22:26:00 -0400, by Matt Harbison
statprof: fix overflow while skipping boilerplate parts
Sat, 20 Oct 2018 20:25:56 +0900, by Yuya Nishihara
statprof: fix indent level of fp.write() (issue6004)
Sat, 20 Oct 2018 20:15:48 +0900, by Yuya Nishihara
py3: stringify setupversion on Windows
Fri, 19 Oct 2018 22:31:47 -0400, by Matt Harbison
tests: add coverage for some untested areas of hgweb
Fri, 19 Oct 2018 23:47:38 -0400, by Matt Harbison
statprof: update the name as the i increases (issue6003)
Fri, 19 Oct 2018 23:30:56 +0300, by Pulkit Goyal
test: show more profile lines in test-profile.t
Fri, 19 Oct 2018 23:18:29 +0300, by Pulkit Goyal
keepalive: use getattr to avoid AttributeErrors when vcr is in use
Fri, 19 Oct 2018 11:45:51 -0400, by Augie Fackler
phabricator: do more of the VCR work in demandimport.deactivated()
Fri, 19 Oct 2018 11:45:25 -0400, by Augie Fackler
tests: sleep longer in test-logtoprocess.t
Fri, 19 Oct 2018 11:28:29 -0400, by Augie Fackler
tests: fix pyflakes warning in test-duplicateoptions.py
Fri, 19 Oct 2018 11:31:18 -0400, by Augie Fackler
branchmap: avoid changelog and attribute lookups in replacecache()
Fri, 19 Oct 2018 16:34:45 +0200, by Gregory Szorc
branchmap: pass changelog into branchmap functions
Fri, 19 Oct 2018 16:16:17 +0200, by Gregory Szorc
fuzz: move many initialization steps into LLVMFuzzerInitialize
Thu, 18 Oct 2018 16:36:10 -0400, by Augie Fackler
bundle2: fix broken compression engine assertion
Thu, 17 Nov 2016 15:51:33 -0800, by Martin von Zweigbergk
tests: glob over a difference between Windows 7 and Window 10
Thu, 18 Oct 2018 17:54:07 -0400, by Matt Harbison
py3: fix module imports in test-highlight.t
Thu, 18 Oct 2018 18:11:16 -0400, by Matt Harbison
py3: fix module imports in tests, as flagged by test-check-module-imports.t
Wed, 17 Oct 2018 23:33:43 -0400, by Matt Harbison
lfs: don't add extension to hgrc after conversion (BC)
Thu, 18 Oct 2018 21:55:47 -0400, by Matt Harbison
addremove: add "ui." prefix to message color keys
Thu, 18 Oct 2018 21:00:07 +0900, by Yuya Nishihara
update: clarify update() call sites by specifying argument names
Thu, 09 Feb 2017 09:17:40 -0800, by Martin von Zweigbergk
debugcommands: avoid stack trace from debugindexstats in pure mode
Thu, 18 Oct 2018 10:11:08 -0700, by Martin von Zweigbergk
tests: fix up pure case of test-sqlitestore.t
Thu, 18 Oct 2018 11:24:20 -0400, by Augie Fackler
tests: don't emit false failures when sqlite3 is missing
Thu, 18 Oct 2018 11:14:04 -0400, by Augie Fackler
py3: get around IOError variants in test-commandserver.t
Tue, 16 Oct 2018 08:48:23 +0200, by Yuya Nishihara
py3: don't use traceback.print_exc() in commandserver.py
Tue, 16 Oct 2018 08:41:58 +0200, by Yuya Nishihara
py3: invalidate repository cache with system-string keys
Tue, 16 Oct 2018 08:29:24 +0200, by Yuya Nishihara
py3: system-stringify file mode in commandserver.py
Tue, 16 Oct 2018 08:20:03 +0200, by Yuya Nishihara
py3: alias next to __next__ in commandserver.py
Tue, 16 Oct 2018 07:57:40 +0200, by Yuya Nishihara
py3: system-stringify list of attributes to be forwarded from commandserver.py
Tue, 16 Oct 2018 07:57:05 +0200, by Yuya Nishihara
py3: import StringIO from test utility to test-commandserver.t
Tue, 16 Oct 2018 07:52:56 +0200, by Yuya Nishihara
py3: use bprint() helper in test-commandserver.t
Tue, 16 Oct 2018 07:38:31 +0200, by Yuya Nishihara
py3: byte-stringify most literals in test-commandserver.t
Tue, 16 Oct 2018 07:35:29 +0200, by Yuya Nishihara
localrepo: ensure we properly %-format int in exception throw
Sun, 14 Oct 2018 09:50:21 -0400, by Augie Fackler
py3: add a r'' prefix in mercurial/exchange.py
Thu, 18 Oct 2018 14:41:14 +0300, by Pulkit Goyal
py3: add 5 new passing tests to whitelist caught by buildbot
Thu, 18 Oct 2018 14:37:38 +0300, by Pulkit Goyal
py3: fix test-import-context.t
Wed, 17 Oct 2018 21:54:49 -0400, by Matt Harbison
py3: restore perfstartup() prior to b456b2e0ad9f on Windows
Mon, 15 Oct 2018 22:02:10 -0400, by Matt Harbison
help: document the server capabilities added by the LFS extension
Wed, 17 Oct 2018 21:05:43 -0400, by Matt Harbison
py3: fix test-propertycache.py on Windows
Thu, 27 Sep 2018 21:54:13 -0400, by Matt Harbison
commands: adjust metavariables as appropriate
Wed, 17 Oct 2018 21:00:36 +0800, by Anton Shestakov
match: fix up a repr to not crash on Python 3
Sun, 14 Oct 2018 11:16:22 -0400, by Augie Fackler
narrow: when widening, don't include manifests the client already has
Fri, 05 Oct 2018 11:07:34 -0700, by Martin von Zweigbergk
tests: add test for widening from an empty clone
Wed, 17 Oct 2018 09:30:07 -0700, by Martin von Zweigbergk
subrepo: access status members by name instead of by position
Wed, 17 Oct 2018 11:43:39 -0700, by Martin von Zweigbergk
revisions: when using prefixhexnode, ensure we prefix "0"
Tue, 16 Oct 2018 07:21:00 -0700, by Kyle Lippincott
store: pass matcher to store.datafiles()
Wed, 03 Oct 2018 16:45:24 +0300, by Pulkit Goyal
streamclone: pass narrowing related info in _walkstreamfiles()
Wed, 03 Oct 2018 17:59:05 +0300, by Pulkit Goyal
streamclone: new server config and some API changes for narrow stream clones
Wed, 26 Sep 2018 17:20:04 +0300, by Pulkit Goyal
narrow: only send the narrowspecs back if ACL in play
Wed, 10 Oct 2018 17:36:59 +0300, by Pulkit Goyal
zsh_completion: add -l/--list flag for hg bookmarks completion
Wed, 17 Oct 2018 22:32:50 +0800, by Anton Shestakov
zsh_completion: fix a couple of flags still not being perfect
Wed, 17 Oct 2018 22:31:34 +0800, by Anton Shestakov
zsh_completion: use $_hg_remote_opts after it is defined
Wed, 17 Oct 2018 22:27:10 +0800, by Anton Shestakov
tests: fix "running x tests using y ... " output in a few more places
Wed, 17 Oct 2018 11:56:03 -0700, by Martin von Zweigbergk
py3: fix test-hardlinks.t
Sun, 14 Oct 2018 09:34:21 +0000, by Mark Thomas
exchange: support declaring pull depth
Fri, 14 Sep 2018 14:56:13 -0700, by Gregory Szorc
exchangev2: support for calling rawstorefiledata to retrieve raw files
Wed, 17 Oct 2018 10:10:05 +0200, by Gregory Szorc
wireprotov2: implement command for retrieving raw store files
Tue, 16 Oct 2018 21:31:21 +0200, by Gregory Szorc
wireprotov2: add response type that serializes to indefinite length bytestring
Tue, 16 Oct 2018 21:35:33 +0200, by Gregory Szorc
exchangev2: recognize narrow patterns when pulling
Wed, 26 Sep 2018 14:38:43 -0700, by Gregory Szorc
sqlitestore: file storage backend using SQLite
Tue, 09 Oct 2018 08:50:13 -0700, by Gregory Szorc
storageutil: extract most of peek_censored from revlog
Tue, 16 Oct 2018 15:36:19 +0200, by Gregory Szorc
lfs: autoload the extension when cloning from repo with lfs enabled
Thu, 20 Sep 2018 17:27:01 -0700, by Matt Harbison
testing: switch to inserting deltas
Tue, 16 Oct 2018 16:24:46 +0200, by Gregory Szorc
testing: remove expectation of error on bad node insert
Tue, 16 Oct 2018 15:24:06 +0200, by Gregory Szorc
storageutil: convert fileid to bytes to avoid cast to %s
Tue, 16 Oct 2018 17:45:39 +0200, by Gregory Szorc
tests: use byte literals in test-storage.py
Tue, 16 Oct 2018 17:48:28 +0200, by Gregory Szorc
py3: byte-stringify literals in test-keyword.t
Tue, 16 Oct 2018 07:19:38 +0200, by Yuya Nishihara
py3: flush std streams before/after running user code in heredoctest.py
Tue, 16 Oct 2018 07:18:30 +0200, by Yuya Nishihara
py3: rewrite StringIO fallback for Python 3
Tue, 16 Oct 2018 08:06:17 +0200, by Yuya Nishihara
py3: reinvent print() function for contrib/hgclient.py
Tue, 16 Oct 2018 07:04:07 +0200, by Yuya Nishihara
py3: work around unicode stdio streams in contrib/hgclient.py
Tue, 16 Oct 2018 07:08:12 +0200, by Yuya Nishihara
py3: convert string literals to bytes in contrib/hgclient.py
Tue, 16 Oct 2018 07:00:41 +0200, by Yuya Nishihara
merge with stable
Tue, 16 Oct 2018 08:16:11 -0400, by Augie Fackler
branchmap: remove redundant sort
Fri, 31 Aug 2018 19:58:41 +0100, by Martijn Pieters
revset: drop special case of 'revset(...)' function in analyze
Thu, 11 Oct 2018 03:15:04 +0200, by Boris Feld
revset: document the `revset(...)` syntax
Thu, 11 Oct 2018 03:13:53 +0200, by Boris Feld
check-commit: update test expectation per removal of "double empty line" rule
Tue, 16 Oct 2018 12:39:21 +0200, by Yuya Nishihara
style: drop requirement to only use single lines between top-level objects
Sun, 14 Oct 2018 15:40:16 +0200, by Martijn Pieters
py3: byteify extension in test-relink.t
Sun, 14 Oct 2018 13:05:53 -0400, by Matt Harbison
f: fix a Python 3 bytes/string issue
Sat, 13 Oct 2018 04:20:22 -0400, by Augie Fackler
tests: use regex instead of Python versions for archive hash changes
Sun, 14 Oct 2018 08:55:30 -0400, by Augie Fackler
notify: a ton of encoding dancing to deal with the email module
Sun, 14 Oct 2018 05:29:00 -0400, by Augie Fackler
tests: add missing b prefix in test-context-metadata.t
Sun, 14 Oct 2018 11:06:21 -0400, by Augie Fackler
context: raise runtime errors with sysstrs
Sun, 14 Oct 2018 11:05:41 -0400, by Augie Fackler
rust: rustfmt config for hg-direct-ffi
Mon, 15 Oct 2018 11:16:12 +0200, by Georges Racinet
rust: rustlazyancestors.__contains__
Mon, 08 Oct 2018 19:11:41 +0200, by Georges Racinet
help: fix a missing quote character in ui.tweakdefaults
Sun, 14 Oct 2018 01:39:22 -0400, by Matt Harbison
rust: hooking into Python code
Thu, 27 Sep 2018 16:55:44 +0200, by Georges Racinet
py3: fix test-propertycache.py
Sun, 14 Oct 2018 14:10:38 +0000, by Mark Thomas
py3: fix test-dirstate-race.t
Sun, 14 Oct 2018 14:02:32 +0000, by Mark Thomas
help: adding a proper declaration for shortlist/basic commands (API)
Fri, 12 Oct 2018 18:49:11 +0200, by Rodrigo Damazio
help: assigning topic categories
Fri, 12 Oct 2018 18:06:32 +0200, by Rodrigo Damazio
help: assigning categories to existing commands
Sat, 13 Oct 2018 02:17:41 -0700, by rdamazio
help: splitting the topics by category
Fri, 12 Oct 2018 17:57:36 +0200, by Rodrigo Damazio
help: adding support for command categories
Sat, 13 Oct 2018 05:03:50 -0700, by rdamazio
notify: just use email.errors
Sun, 14 Oct 2018 13:35:47 +0200, by Yuya Nishihara
rust-chg: add struct holding information needed to spawn server process
Sat, 06 Oct 2018 21:13:59 +0900, by Yuya Nishihara
rust-chg: install logger if $CHGDEBUG is set
Sun, 07 Oct 2018 11:32:42 +0900, by Yuya Nishihara
rust-chg: depend on log and tokio_timer
Sat, 06 Oct 2018 20:07:11 +0900, by Yuya Nishihara
rust-chg: suppress panic while writing chg error to stderr
Sun, 07 Oct 2018 20:55:51 +0900, by Yuya Nishihara
logcmdutil: add a helpful assertion to catch mistyped templates early
Sun, 14 Oct 2018 04:37:25 -0400, by Augie Fackler
notify: adapt to new location of email module's errors
Sun, 14 Oct 2018 05:28:01 -0400, by Augie Fackler
notify: add some b prefixes
Sun, 14 Oct 2018 04:33:47 -0400, by Augie Fackler
py3: fix test-diff-color.t
Sun, 14 Oct 2018 09:24:36 +0000, by Mark Thomas
py3: fix test-revlog.t
Sun, 14 Oct 2018 09:07:43 +0000, by Mark Thomas
fuzz: try *even harder* to prevent Python from looking up usernames
Sun, 14 Oct 2018 04:11:35 -0400, by Augie Fackler
wireproto: fix incorrect function name in docstring
Sun, 14 Oct 2018 03:42:43 -0400, by Connor Sheehan
py3: fix test-status.t
Sat, 13 Oct 2018 15:32:52 +0000, by Mark Thomas
formatter: make debug output prettier
Sun, 14 Oct 2018 07:25:01 +0200, by Yuya Nishihara
stringutil: allow to specify initial indent level of pprint()
Sun, 14 Oct 2018 07:23:02 +0200, by Yuya Nishihara
stringutil: make level parameter of pprintgen() 0-origin
Sun, 14 Oct 2018 07:18:19 +0200, by Yuya Nishihara
formatter: use stringutil.pprint() in debug output to drop b''
Sun, 14 Oct 2018 06:51:19 +0200, by Yuya Nishihara
rust: exposing in parsers module
Thu, 27 Sep 2018 16:56:15 +0200, by Georges Racinet
rust: iterator bindings to C code
Thu, 27 Sep 2018 16:51:36 +0200, by Georges Racinet
rust: pure Rust lazyancestors iterator
Thu, 27 Sep 2018 17:03:16 +0200, by Georges Racinet
run-tests: restore quoting the python executable for running *.py tests
Sat, 13 Oct 2018 23:08:29 -0400, by Matt Harbison
tests: replace `cd ..` with an absolute path in a couple ssh tests
Sat, 13 Oct 2018 19:49:33 -0400, by Matt Harbison
lfs: register the flag processors per repository
Thu, 04 Oct 2018 00:17:26 -0400, by Matt Harbison
revlog: allow flag processors to be applied via store options
Tue, 09 Oct 2018 21:53:21 -0400, by Matt Harbison
py3: use str to query registry values on Windows
Fri, 12 Oct 2018 17:34:45 -0400, by Matt Harbison
py3: convert "usage" literal to bytes
Sat, 13 Oct 2018 16:57:28 +0200, by Yuya Nishihara
churn: remove redundant round()
Sat, 13 Oct 2018 09:47:53 -0400, by Augie Fackler
py3: use py3 as the test tag, dropping the k
Sat, 13 Oct 2018 10:09:12 +0200, by Martijn Pieters
tests: fix inline extension in test-fncache.t for Python 3
Sat, 13 Oct 2018 09:03:08 -0400, by Augie Fackler
py3: 3 more passing tests
Sat, 13 Oct 2018 08:59:06 -0400, by Augie Fackler
simplemerge: port to Python 3
Sat, 13 Oct 2018 08:54:44 -0400, by Augie Fackler
contrib: fix up output in check-config.py to use strs to avoid b prefixes
Sat, 13 Oct 2018 05:14:21 -0400, by Augie Fackler
context: open files in bytes mode
Sat, 13 Oct 2018 08:54:31 -0400, by Augie Fackler
tests: fix up test-hghave for recent run-tests change to use more CPUs
Sat, 13 Oct 2018 09:45:49 -0400, by Augie Fackler
py3: fix test-parse-date.t
Sat, 13 Oct 2018 13:39:07 +0000, by Mark Thomas
obsolete: don't translate internal error message
Fri, 12 Oct 2018 16:51:11 +0200, by Yuya Nishihara
py3: get around unicode docstrings in test-encoding-textwrap.t and test-help.t
Fri, 12 Oct 2018 19:25:08 +0200, by Yuya Nishihara
crecord: make enter move cursor down to the next item of the same type
Sat, 13 Oct 2018 11:52:30 +0200, by Anton Shestakov
py3: fix infinitepush extension tests
Sat, 13 Oct 2018 12:58:24 +0000, by Mark Thomas
py3: build help of compression engines in bytes
Sat, 13 Oct 2018 14:17:25 +0200, by Yuya Nishihara
py3: do I/O in bytes in test-help.t
Sat, 13 Oct 2018 14:11:12 +0200, by Yuya Nishihara
tests: accept slightly different zip file in Python 3
Sat, 13 Oct 2018 07:55:34 -0400, by Augie Fackler
webcommands: use stringutil.pprint() to repr invalid archive types
Sat, 13 Oct 2018 07:53:51 -0400, by Augie Fackler
archival: don't try and fsdecode non-{bytes,str} objects
Sat, 13 Oct 2018 07:51:22 -0400, by Augie Fackler
tests: fix last failure in test-tools.t
Sat, 13 Oct 2018 06:34:53 -0400, by Augie Fackler
run-tests: run tests with as many processes as cores by default
Sat, 13 Oct 2018 12:20:24 +0200, by Gregory Szorc
run-tests: print number of tests and parallel process count
Sat, 13 Oct 2018 12:11:45 +0200, by Gregory Szorc
releasenotes: use stringutil.wrap() instead of handcrafted TextWrapper wrapper
Sat, 13 Oct 2018 12:29:43 +0200, by Yuya Nishihara
match: optimize matcher when all patterns are of rootfilesin kind
Sat, 13 Oct 2018 00:22:05 -0700, by Martin von Zweigbergk
churn: use integer division consistently
Sat, 13 Oct 2018 06:02:27 -0400, by Augie Fackler
churn: fix stack traces on Python 3
Sat, 13 Oct 2018 05:58:16 -0400, by Augie Fackler
py3: moar passing tests
Sat, 13 Oct 2018 04:00:57 -0400, by Augie Fackler
py3: one new passing tests
Fri, 12 Oct 2018 12:52:49 -0400, by Augie Fackler
tests: expand our coverage of errors in Python 3 for bad extensions
Fri, 12 Oct 2018 12:38:37 -0400, by Augie Fackler
tests: add lots of globs and conditional output lines
Fri, 12 Oct 2018 12:32:12 -0400, by Augie Fackler
releasenotes: fix remaining bytes/unicode issues caught by tests
Sat, 13 Oct 2018 04:00:47 -0400, by Augie Fackler
relnotes: port to Python 3
Sat, 13 Oct 2018 03:27:21 -0400, by Augie Fackler
py3: use __code__ instead of func_code to test if func is cachable
Sat, 13 Oct 2018 11:01:38 +0200, by Yuya Nishihara
py3: pass in system string to vars(branchmap).__contains__()
Sat, 13 Oct 2018 10:58:06 +0200, by Yuya Nishihara
test-bookmarks-pushpull: use correct tmp dir for no-bm-move.sh
Sat, 13 Oct 2018 08:48:59 +0000, by Mark Thomas
py3: add some glob to make output compatible with python 3
Sat, 13 Oct 2018 05:17:28 +0300, by Pulkit Goyal
py3: add a b'' prefix in tests/test-requires.t
Sat, 13 Oct 2018 05:14:23 +0300, by Pulkit Goyal
py3: use '%d' for rev nums instead of '%s'
Sat, 13 Oct 2018 05:12:20 +0300, by Pulkit Goyal
py3: more globing of things to make output compatible between py2 and py3
Sat, 13 Oct 2018 05:03:24 +0300, by Pulkit Goyal
py3: use stringutil.pprint() instead of '%r'
Sat, 13 Oct 2018 04:54:35 +0300, by Pulkit Goyal
py3: use '%d' for integers instead of '%s'
Sat, 13 Oct 2018 04:51:09 +0300, by Pulkit Goyal
py3: add some py3 specific output to test
Sat, 13 Oct 2018 04:47:51 +0300, by Pulkit Goyal
py3: use stringutil.pprint() in color.py instead of '%r'
Sat, 13 Oct 2018 04:42:14 +0300, by Pulkit Goyal
py3: add b'' prefixes in tests/test-progress.t
Sat, 13 Oct 2018 04:36:04 +0300, by Pulkit Goyal
py3: add b'' prefixes to tests/test-keyword.t
Sat, 13 Oct 2018 04:29:03 +0300, by Pulkit Goyal
py3: use stringutil.pprint() if we are printing bool values
Sat, 13 Oct 2018 04:24:19 +0300, by Pulkit Goyal
py3: glob some difference between py2 and py3 output
Sat, 13 Oct 2018 04:21:02 +0300, by Pulkit Goyal
py3: byteify tests/wireprotosimplecache.py
Sat, 13 Oct 2018 04:09:34 +0300, by Pulkit Goyal
py3: add b'' prefixes in tests/test-help.t
Sat, 13 Oct 2018 04:08:53 +0300, by Pulkit Goyal
py3: use sys.stdout.buffer for binary output in tests/svnxml.py
Sat, 13 Oct 2018 03:59:15 +0300, by Pulkit Goyal
py3: use '%s' instead of %r in hgext/convert/subversion.py
Sat, 13 Oct 2018 03:58:20 +0300, by Pulkit Goyal
py3: make test-contrib-perf.t work on python 3
Sat, 13 Oct 2018 03:46:57 +0300, by Pulkit Goyal
py3: add 3 more passing tests to whitelist caught by buildbot
Sat, 13 Oct 2018 03:32:12 +0300, by Pulkit Goyal
py3: add some r'' prefixes in hgext/narrow/narrowwirepeer.py
Sat, 13 Oct 2018 00:35:37 +0300, by Pulkit Goyal
py3: r'' prefix default values for mimetypes.guess_mime()
Fri, 12 Oct 2018 19:49:02 +0200, by Gregory Szorc
absorb: update help text
Fri, 12 Oct 2018 20:03:29 +0000, by Mark Thomas
fsmonitor: use vfs instead of opener (issue5938)
Fri, 12 Oct 2018 16:45:46 +0900, by FUJIWARA Katsunori
tests: configure fsmonitor.mode=paranoid always if fsmonitor is used
Fri, 12 Oct 2018 16:07:08 +0900, by FUJIWARA Katsunori
tests: drop files from exclusion list in test-check-module-imports.t
Mon, 08 Oct 2018 13:12:06 +0900, by FUJIWARA Katsunori
tests: use NO_CHECK_EOF for fragments used to test importing via extension
Mon, 08 Oct 2018 12:03:04 +0900, by FUJIWARA Katsunori
tests: use NO_CHECK_EOF for fragments having intentional error
Mon, 08 Oct 2018 10:30:59 +0900, by FUJIWARA Katsunori
tests: fix style issue of importing order in test-lock.py
Mon, 08 Oct 2018 10:45:36 +0900, by FUJIWARA Katsunori
tests: fix style issue of importing hgweb in embedded code fragments
Mon, 08 Oct 2018 10:10:06 +0900, by FUJIWARA Katsunori
py3: encode str to bytes
Fri, 12 Oct 2018 18:20:17 +0200, by Gregory Szorc
py3: sprinkle statprof.py with utf-8 encoding
Fri, 12 Oct 2018 19:00:24 +0200, by Gregory Szorc
py3: flush stdout
Fri, 12 Oct 2018 19:17:22 +0200, by Gregory Szorc
py3: use raw strings in statprof.py
Fri, 12 Oct 2018 19:07:12 +0200, by Gregory Szorc
py3: switch from print(..., file=) to write()
Fri, 12 Oct 2018 18:51:10 +0200, by Gregory Szorc
py3: use %d in a few places
Fri, 12 Oct 2018 18:40:32 +0200, by Gregory Szorc
py3: use raw strings for stack names
Fri, 12 Oct 2018 18:37:42 +0200, by Gregory Szorc
py3: use sysbytes for converting code attributes
Fri, 12 Oct 2018 18:30:40 +0200, by Gregory Szorc
py3: use write() instead of print()
Fri, 12 Oct 2018 18:26:10 +0200, by Gregory Szorc
py3: use %d to format ints
Fri, 12 Oct 2018 17:35:54 +0200, by Gregory Szorc
py3: convert sorting field to sysstr
Fri, 12 Oct 2018 17:31:10 +0200, by Gregory Szorc
py3: encode json output to bytes and use write()
Fri, 12 Oct 2018 17:25:02 +0200, by Gregory Szorc
absorb: prompt user to accept absorb changes by default
Fri, 12 Oct 2018 17:48:40 +0000, by Mark Thomas
templatefuncs: add truncate parameter to pad
Fri, 12 Oct 2018 15:46:52 +0000, by Mark Thomas
absorb: print summary of changesets affected
Fri, 12 Oct 2018 15:46:51 +0000, by Mark Thomas
absorb: use a formatter to generate output
Fri, 12 Oct 2018 13:35:58 +0000, by Mark Thomas
tests: fix up test-bad-extension.t's inline extension
Fri, 12 Oct 2018 12:31:17 -0400, by Augie Fackler
polib: update to latest release 1.0.7 (upstream rev d75ce6dbbc2a)
Fri, 12 Oct 2018 11:44:27 -0400, by Augie Fackler
tests: glob away some annoying py3 differences
Fri, 12 Oct 2018 10:01:09 -0400, by Augie Fackler
tests: fix a repr on python3 in test-extension.t
Fri, 12 Oct 2018 10:00:43 -0400, by Augie Fackler
tests: so many b prefixes in test-extension.t
Fri, 12 Oct 2018 10:00:14 -0400, by Augie Fackler
tests: ensure print() statements in test-extension.t all flush
Fri, 12 Oct 2018 09:59:11 -0400, by Augie Fackler
revlog: update pure nodecache start lookup offset on insertion
Fri, 12 Oct 2018 16:19:21 +0200, by Gregory Szorc
exchangev2: use filesdata
Wed, 03 Oct 2018 13:57:42 -0700, by Gregory Szorc
wireprotov2: define and implement "filesdata" command
Wed, 03 Oct 2018 12:54:39 -0700, by Gregory Szorc
wireprotov2: extract file object emission to own function
Tue, 02 Oct 2018 10:31:36 -0700, by Gregory Szorc
wireprotov2: change how revisions are specified to changesetdata
Mon, 08 Oct 2018 18:17:12 -0700, by Gregory Szorc
wireprotov2: stop sending phase updates for base revisions
Mon, 08 Oct 2018 17:54:14 -0700, by Gregory Szorc
debugcommands: support wrapping long lines
Thu, 11 Oct 2018 09:47:52 +0200, by Gregory Szorc
exchangev2: honor server advertised manifestdata recommended batch size
Wed, 03 Oct 2018 13:17:00 -0700, by Gregory Szorc
wireprotov2: advertise recommended batch size for requests
Mon, 08 Oct 2018 17:45:51 -0700, by Gregory Szorc
httppeer: expose API descriptor on httpv2peer
Wed, 03 Oct 2018 13:07:28 -0700, by Gregory Szorc
tests: use baseurl instead of advertisedbaseurl
Thu, 11 Oct 2018 09:26:05 +0200, by Gregory Szorc
py3: another one started passing
Fri, 12 Oct 2018 09:23:55 -0400, by Augie Fackler
py3: one more passing test
Fri, 12 Oct 2018 06:55:11 -0400, by Augie Fackler
scmutil: wrap locker information in bytestr before repr()ing it
Fri, 12 Oct 2018 06:50:01 -0400, by Augie Fackler
py3: more passing tests
Fri, 12 Oct 2018 06:50:46 -0400, by Augie Fackler
py3: whitelist another passing test
Fri, 12 Oct 2018 06:35:55 -0400, by Augie Fackler
obsolete: convert error string to a sysstr
Fri, 12 Oct 2018 06:22:15 -0400, by Augie Fackler
tests: ensure the python 3 passing test list stays sorted
Fri, 12 Oct 2018 06:39:32 -0400, by Augie Fackler
py3: sort passing test list
Fri, 12 Oct 2018 06:35:33 -0400, by Augie Fackler
py3: tweak stdout writing in test-hgweb-no-path-info.t
Thu, 11 Oct 2018 23:07:23 +0200, by Gregory Szorc
py3: use .+ instead of .* in regexp pattern
Thu, 11 Oct 2018 22:53:44 +0200, by Gregory Szorc
py3: coerce bytestr to bytes to appease urllib.parse.quote_from_bytes()
Thu, 11 Oct 2018 22:26:12 +0200, by Gregory Szorc
py3: pass str and return bytes from mimetypes.guess_type()
Thu, 11 Oct 2018 21:47:39 +0200, by Gregory Szorc
py3: use bytes literal in test-hgweb-json.t
Thu, 11 Oct 2018 22:27:52 +0200, by Gregory Szorc
py3: convert diff opcode name to bytes
Thu, 11 Oct 2018 22:01:54 +0200, by Gregory Szorc
py3: byteify hgweberror.py
Thu, 11 Oct 2018 21:22:43 +0200, by Gregory Szorc
py3: encode JSON str to bytes
Thu, 11 Oct 2018 21:18:58 +0200, by Gregory Szorc
py3: use b'' in test-check-interfaces.py
Thu, 11 Oct 2018 21:05:03 +0200, by Gregory Szorc
revlog: optimize ancestors() to not check filtered revisions for each
Fri, 12 Oct 2018 06:22:43 +0200, by Yuya Nishihara
phabricator: drop support for the legacy phabricator.auth.token config (BC)
Thu, 11 Oct 2018 21:51:17 -0400, by Matt Harbison
absorb: print '{rev}:' as a prefix to the hash
Thu, 11 Oct 2018 22:39:11 -0400, by Matt Harbison
packaging: fix "make centos{5,6,7}"
Thu, 11 Oct 2018 19:02:42 +0200, by muxator
narrow: don't compress the bundle2 when sending 'error:abort'
Wed, 10 Oct 2018 19:46:13 +0300, by Pulkit Goyal
push: add "remote" to 'repository changed while pushing' messages (issue5971)
Thu, 11 Oct 2018 03:38:23 +0530, by Taapas Agrawal
fuzz: try setting PYTHONNOUSERSITE=1 to avoid loading site-packages
Thu, 11 Oct 2018 07:27:24 -0400, by Augie Fackler
perf: extract result formatting in its own function
Wed, 03 Oct 2018 10:46:56 +0200, by Boris Feld
perf: extract the timing of a section in a context manager
Tue, 02 Oct 2018 18:54:06 +0200, by Boris Feld
pref: support negative indexing in perfrevlogrevisions
Mon, 01 Oct 2018 17:23:54 +0200, by Boris Feld
perf: accept formatter option for perfmanifest
Mon, 01 Oct 2018 17:37:38 +0200, by Boris Feld
perf: fix -T json
Mon, 01 Oct 2018 17:53:47 +0200, by Boris Feld
formatter: more details on assertion failure
Mon, 01 Oct 2018 17:37:53 +0200, by Boris Feld
wireprotov2: raise ProgrammingError on unknown action
Wed, 10 Oct 2018 23:19:42 -0700, by Gregory Szorc
wireprotov2: send content encoded frames from server
Mon, 08 Oct 2018 17:24:28 -0700, by Gregory Szorc
wireprotov2: raise exception in objects() if future has been resolved
Mon, 08 Oct 2018 15:19:32 -0700, by Gregory Szorc
wireprotov2: don't emit empty frames
Fri, 05 Oct 2018 23:49:18 +0000, by Gregory Szorc
wireprotov2: remove functions for creating response frames from bytes
Fri, 05 Oct 2018 10:29:36 -0700, by Gregory Szorc
wireprotov2: handle noop action
Fri, 05 Oct 2018 09:23:06 -0700, by Gregory Szorc
wireprotov2: send protocol settings frame from client
Mon, 08 Oct 2018 17:00:16 -0700, by Gregory Szorc
wireprotov2: define and use stream encoders
Mon, 08 Oct 2018 17:10:59 -0700, by Gregory Szorc
lfs: avoid a potential variable reference before assignment error in cmdserver stable
Wed, 10 Oct 2018 12:25:28 -0400, by Matt Harbison
wireprotov2: establish dedicated classes for input and output streams
Thu, 04 Oct 2018 17:39:16 -0700, by Gregory Szorc
wireprotov2: pass ui into clientreactor and serverreactor
Thu, 04 Oct 2018 17:17:57 -0700, by Gregory Szorc
wireprotov2: handle stream encoding settings frames
Thu, 04 Oct 2018 16:44:21 -0700, by Gregory Szorc
wireprotov2: document client reactor actions
Thu, 04 Oct 2018 15:43:21 -0700, by Gregory Szorc
wireprotov2: handle sender protocol settings frames
Thu, 04 Oct 2018 16:26:45 -0700, by Gregory Szorc
wireprotov2: update stream encoding specification
Thu, 04 Oct 2018 14:05:16 -0700, by Gregory Szorc
cborutil: cast bytearray to bytes
Thu, 04 Oct 2018 15:08:42 -0700, by Gregory Szorc
tests: disable zstd in test
Mon, 08 Oct 2018 17:06:24 -0700, by Gregory Szorc
wireprotov2: remove "compression" from capabilities response
Mon, 08 Oct 2018 17:20:41 -0700, by Gregory Szorc
zstandard: vendor python-zstandard 0.10.1
Mon, 08 Oct 2018 16:27:40 -0700, by Gregory Szorc
rust-chg: install signal handlers to forward signals to server
Tue, 25 Sep 2018 20:55:03 +0900, by Yuya Nishihara
rust-chg: remove SIGCHLD handler which won't work in oxidized chg
Mon, 24 Sep 2018 22:19:49 +0900, by Yuya Nishihara
rust-chg: extract signal handlers from chg/procutil.c
Mon, 24 Sep 2018 22:04:57 +0900, by Yuya Nishihara
help: document about "version" template keywords
Sun, 07 Oct 2018 23:19:49 +0900, by Yuya Nishihara
help: document about "tags" template keywords
Sun, 07 Oct 2018 23:14:21 +0900, by Yuya Nishihara
help: document about "status" template keywords
Sun, 07 Oct 2018 23:12:04 +0900, by Yuya Nishihara
help: document about "resolve" template keywords
Sun, 07 Oct 2018 23:05:00 +0900, by Yuya Nishihara
help: document about "paths" template keywords
Sun, 07 Oct 2018 23:00:50 +0900, by Yuya Nishihara
help: document about "identify" template keywords
Sun, 07 Oct 2018 22:56:37 +0900, by Yuya Nishihara
help: document about "grep" template keywords
Sun, 07 Oct 2018 22:50:12 +0900, by Yuya Nishihara
chgserver: catch Abort while parsing early args to shut down cleanly
Sun, 07 Oct 2018 17:35:25 +0900, by Yuya Nishihara
chg: upgrade client to use "setumask2" command
Fri, 05 Oct 2018 22:08:37 +0900, by Yuya Nishihara
chgserver: add "setumask2" command which uses correct message frame
Thu, 04 Oct 2018 23:25:55 +0900, by Yuya Nishihara
packaging: "make deb" no longer fails
Tue, 09 Oct 2018 22:29:10 +0200, by muxator
packaging: cleanup() did not read the value of $CLEANUP
Tue, 09 Oct 2018 22:24:38 +0200, by muxator
packaging: builddeb's cleanup needs to expand PWD, safely
Tue, 09 Oct 2018 22:18:35 +0200, by muxator
packaging: blindly factor out trap's cleanup function in builddeb
Tue, 09 Oct 2018 22:16:25 +0200, by muxator
packaging: print full path to the packages when builddeb finishes successfully
Tue, 09 Oct 2018 21:40:49 +0200, by muxator
packaging: print more specific error messages when builddeb fails
Tue, 09 Oct 2018 21:39:39 +0200, by muxator
cmdutil: sort unresolved paths
Tue, 09 Oct 2018 12:56:11 -0700, by Gregory Szorc
fuzz: report error if Python code raised exception
Tue, 09 Oct 2018 07:46:01 +0900, by Yuya Nishihara
revlog: explicitly initialize static variables
Tue, 09 Oct 2018 07:42:05 +0900, by Yuya Nishihara
tests: do not change sys.path, it can break loading cext.parsers
Mon, 08 Oct 2018 21:53:32 +0200, by Joerg Sonnenberger
tests: deal with differences in tic from ncurses and NetBSD
Mon, 08 Oct 2018 21:51:20 +0200, by Joerg Sonnenberger
closehead: fix close-head -r listification
Mon, 08 Oct 2018 20:07:13 +0200, by Joerg Sonnenberger
import-checker: use testparseutil.embedded() to centralize detection logic
Thu, 23 Aug 2018 12:25:54 +0900, by FUJIWARA Katsunori
tests: use NO_CHECK_EOF as heredoc limit mark to omit checking code fragments
Thu, 23 Aug 2018 12:25:54 +0900, by FUJIWARA Katsunori
contrib: add an utility module to parse test scripts
Thu, 23 Aug 2018 12:25:54 +0900, by FUJIWARA Katsunori
tests: use environment variable indirectly
Thu, 23 Aug 2018 12:24:41 +0900, by FUJIWARA Katsunori
tests: import multiple modules separately
Thu, 23 Aug 2018 12:20:41 +0900, by FUJIWARA Katsunori
fuzz: allow manifest fuzzer to detect leaks
Mon, 08 Oct 2018 11:50:25 -0400, by Augie Fackler
fuzzers: init Python in LLVMFuzzerInitialize and intentionally leak it
Mon, 08 Oct 2018 11:47:25 -0400, by Augie Fackler
revlog: if the module is initialized more than once, don't leak nullentry
Mon, 08 Oct 2018 11:42:06 -0400, by Augie Fackler
narrow: move remaining narrow-limited dirstate walks to core
Mon, 01 Oct 2018 14:31:15 -0700, by Martin von Zweigbergk
narrow: allow repo.narrowmatch(match) to include exact matches from "match"
Mon, 01 Oct 2018 10:11:00 -0700, by Martin von Zweigbergk
narrow: filter files by narrowspec in ctx.matches()
Fri, 28 Sep 2018 22:35:05 -0700, by Martin von Zweigbergk
narrow: only walk files within narrowspec also for committed revisions
Fri, 28 Sep 2018 17:09:15 -0700, by Martin von Zweigbergk
status: intersect matcher with narrow matcher instead of filtering afterwards
Thu, 27 Sep 2018 23:01:26 -0700, by Martin von Zweigbergk
localrepo: allow narrowmatch() to accept matcher to intersect with
Fri, 28 Sep 2018 12:29:21 -0700, by Martin von Zweigbergk
obsolete: fix ValueError when stored note contains ':' char (issue5783)
Fri, 05 Oct 2018 01:55:51 +0300, by Zharaskhan Aman
narrow: update TODO.rst now that we share format with sparse
Fri, 05 Oct 2018 16:06:51 -0700, by Martin von Zweigbergk
narrow: update TODO.rst now that we filter status in ctx
Fri, 05 Oct 2018 16:04:25 -0700, by Martin von Zweigbergk
narrow: update TODO.rst now that the narrowspec is in .hg/store
Fri, 05 Oct 2018 16:01:21 -0700, by Martin von Zweigbergk
py3: add 8 new passing tests to whitelist found by buildbot
Fri, 05 Oct 2018 23:28:14 +0300, by Pulkit Goyal
py3: use '%f' for floats instead of '%s'
Fri, 05 Oct 2018 23:31:51 +0300, by Pulkit Goyal
narrow: move adding of narrow server capabilities to core
Fri, 05 Oct 2018 22:52:24 +0300, by Pulkit Goyal
wireprotoserver: move narrow capabilities to wireprototypes.py
Fri, 05 Oct 2018 22:31:12 +0300, by Pulkit Goyal
narrow: introduce a config option to check if narrow is enabled or not
Fri, 05 Oct 2018 22:19:19 +0300, by Pulkit Goyal
narrow: move the code to generate a widening bundle2 to core
Fri, 05 Oct 2018 20:24:07 +0300, by Pulkit Goyal
narrow: start returning bundle2 from widen_bundle()
Tue, 02 Oct 2018 17:09:56 +0300, by Pulkit Goyal
narrow: the first version of narrow_widen wireprotocol command
Fri, 28 Sep 2018 23:42:31 +0300, by Pulkit Goyal
remotenames: abort if literal revset pattern matches nothing
Fri, 05 Oct 2018 21:43:57 +0900, by Yuya Nishihara
remotenames: remove unneeded sorted() from revset implementation
Fri, 05 Oct 2018 21:39:41 +0900, by Yuya Nishihara
remotenames: don't call a set of nodes as "revs"
Fri, 05 Oct 2018 21:36:48 +0900, by Yuya Nishihara
remotenames: use util.always instead of handcrafted lambda
Fri, 05 Oct 2018 21:30:55 +0900, by Yuya Nishihara
remotenames: inline _parseargs() into _revsetutil()
Fri, 05 Oct 2018 21:29:21 +0900, by Yuya Nishihara
repo: create changectx in a single place in localrepo.__getitem__
Thu, 04 Oct 2018 16:27:40 -0700, by Martin von Zweigbergk
repo: remove the last few "pass" statements in localrepo.__getitem__
Thu, 04 Oct 2018 16:06:36 -0700, by Martin von Zweigbergk
filectx: correct docstring about "changeid"
Thu, 04 Oct 2018 10:38:55 -0700, by Martin von Zweigbergk
context: drop incorrect and superfluous docstring
Thu, 04 Oct 2018 10:30:05 -0700, by Martin von Zweigbergk
remotenames: follow-up on D3639 to make revset funcs take only one arg
Thu, 04 Oct 2018 21:35:12 -0400, by Augie Fackler
remotenames: add names argument to remotenames revset
Thu, 12 Jul 2018 03:12:09 +0530, by Pulkit Goyal
copies: add time information to the debug information
Fri, 07 Sep 2018 11:43:48 -0400, by Boris Feld
copies: add a devel debug mode to trace what copy tracing does
Fri, 07 Sep 2018 11:16:06 -0400, by Boris Feld
revlog: rewrite censoring logic
Tue, 02 Oct 2018 17:34:34 -0700, by Gregory Szorc
revlog: move loading of index data into own method
Tue, 02 Oct 2018 17:28:54 -0700, by Gregory Szorc
revlog: clear revision cache on hash verification failure
Wed, 03 Oct 2018 10:57:35 -0700, by Gregory Szorc
fuzz: new fuzzer for cext/manifest.c
Thu, 06 Sep 2018 02:36:25 -0400, by Augie Fackler
revlog: rename _cache to _revisioncache
Wed, 03 Oct 2018 10:32:21 -0700, by Gregory Szorc
testing: add file storage integration for bad hashes and censoring
Wed, 03 Oct 2018 10:56:48 -0700, by Gregory Szorc
testing: add file storage tests for getstrippoint() and strip()
Wed, 03 Oct 2018 10:03:41 -0700, by Gregory Szorc
wireprotov2: always advertise raw repo requirements
Wed, 03 Oct 2018 10:04:04 -0700, by Gregory Szorc
tests: don't be as verbose in wireprotov2 tests
Wed, 03 Oct 2018 09:48:22 -0700, by Gregory Szorc
repository: define and use revision flag constants
Wed, 03 Oct 2018 12:57:01 -0700, by Gregory Szorc
context: reverse conditional branch order in introrev
Thu, 04 Oct 2018 01:22:25 +0200, by Boris Feld
context: drop a redundant fast path in introrev
Thu, 04 Oct 2018 08:40:01 +0200, by Boris Feld
context: fast path linkrev adjustement in trivial case
Thu, 04 Oct 2018 08:34:59 +0200, by Boris Feld
url: allow to configure timeout on http connection
Thu, 04 Oct 2018 11:28:48 +0200, by Cédric Krier
obsolete: explicitly track folds inside the markers
Wed, 26 Sep 2018 23:50:14 +0200, by Boris Feld
cleanupnodes: update comment to drop mention of filtering
Wed, 03 Oct 2018 11:59:47 +0200, by Boris Feld
treemanifests: remove _loadalllazy when doing copies
Wed, 26 Sep 2018 18:04:46 -0700, by spectral
treemanifests: store whether a lazydirs entry needs copied after materializing
Tue, 25 Sep 2018 19:25:41 -0700, by spectral
treemanifests: extract _loaddifflazy from _diff, use in _filesnotin
Tue, 02 Oct 2018 18:55:07 -0700, by spectral
identify: show remote bookmarks in `hg id url -Tjson -B`
Wed, 03 Oct 2018 18:07:49 -0400, by Valentin Gatien-Baron
showstack: also handle SIGALRM
Wed, 03 Oct 2018 16:03:16 -0400, by Augie Fackler
exchangev2: add progress bar around manifest scanning
Wed, 03 Oct 2018 13:54:31 -0700, by Gregory Szorc
httppeer: report http statistics
Mon, 01 Oct 2018 13:17:38 -0700, by Gregory Szorc
keepalive: track number of bytes received from an HTTP response
Mon, 01 Oct 2018 12:30:32 -0700, by Gregory Szorc
keepalive: track request count and bytes sent
Mon, 01 Oct 2018 12:02:54 -0700, by Gregory Szorc
url: have httpsconnection inherit from our custom HTTPConnection
Mon, 01 Oct 2018 12:06:36 -0700, by Gregory Szorc
cborutil: change buffering strategy
Wed, 03 Oct 2018 09:43:01 -0700, by Gregory Szorc
cleanup: some Yoda conditions, this patch removes
Wed, 03 Oct 2018 10:27:44 -0700, by Martin von Zweigbergk
streamclone: don't support stream clone unless repo feature present
Tue, 02 Oct 2018 12:43:54 -0700, by Gregory Szorc
localrepo: add repository feature when repo can be stream cloned
Tue, 02 Oct 2018 12:40:39 -0700, by Gregory Szorc
wireprotov2: client support for following content redirects
Wed, 26 Sep 2018 18:08:08 -0700, by Gregory Szorc
wireprotov2: server support for sending content redirects
Wed, 26 Sep 2018 18:07:55 -0700, by Gregory Szorc
wireprotov2: client support for advertising redirect targets
Wed, 26 Sep 2018 15:02:19 -0700, by Gregory Szorc
wireprotov2: advertise redirect targets in capabilities
Wed, 26 Sep 2018 17:46:48 -0700, by Gregory Szorc
wireprotov2: define semantics for content redirects
Wed, 26 Sep 2018 18:02:06 -0700, by Gregory Szorc
wireprotov2: support response caching
Wed, 26 Sep 2018 17:16:56 -0700, by Gregory Szorc
wireprotov2: define type to represent pre-encoded object
Wed, 26 Sep 2018 17:16:27 -0700, by Gregory Szorc
wireprotov2: change name and behavior of readframe()
Wed, 26 Sep 2018 15:53:49 -0700, by Gregory Szorc
url: move _wraphttpresponse() from httpeer
Wed, 26 Sep 2018 16:07:59 -0700, by Gregory Szorc
debugcommands: print all CBOR objects
Wed, 26 Sep 2018 14:54:15 -0700, by Gregory Szorc
help: document about "export" template keywords
Wed, 03 Oct 2018 22:48:19 +0900, by Yuya Nishihara
help: document about "config" template keywords
Wed, 03 Oct 2018 22:43:57 +0900, by Yuya Nishihara
help: document about "cat" template keywords
Wed, 03 Oct 2018 22:34:18 +0900, by Yuya Nishihara
help: document about "branches" template keywords
Wed, 03 Oct 2018 22:38:49 +0900, by Yuya Nishihara
help: document about "bookmarks" template keywords
Wed, 03 Oct 2018 22:32:18 +0900, by Yuya Nishihara
help: document about "annotate" template keywords
Wed, 03 Oct 2018 22:27:45 +0900, by Yuya Nishihara
storageutil: pass nodes into emitrevisions()
Fri, 28 Sep 2018 16:34:53 -0700, by Gregory Szorc
storageutil: make all callables optional
Fri, 28 Sep 2018 16:16:09 -0700, by Gregory Szorc
storageutil: extract most of emitrevisions() to standalone function
Fri, 28 Sep 2018 16:16:22 -0700, by Gregory Szorc
storageutil: invert logic of file data comparison
Fri, 28 Sep 2018 11:51:17 -0700, by Gregory Szorc
storageutil: extract filelog.cmp() to a standalone function
Fri, 28 Sep 2018 11:47:53 -0700, by Gregory Szorc
storageutil: extract copy metadata retrieval out of filelog
Fri, 28 Sep 2018 11:37:49 -0700, by Gregory Szorc
storageutil: extract functionality for resolving strip revisions
Fri, 28 Sep 2018 11:29:05 -0700, by Gregory Szorc
storageutil: consistently raise LookupError (API)
Fri, 28 Sep 2018 11:16:44 -0700, by Gregory Szorc
storageutil: implement file identifier resolution method (BC)
Fri, 28 Sep 2018 11:03:17 -0700, by Gregory Szorc
testing: add more testing for ifileindex.lookup()
Fri, 28 Sep 2018 11:00:20 -0700, by Gregory Szorc
dagop: extract DAG local heads functionality from revlog
Fri, 28 Sep 2018 10:20:37 -0700, by Gregory Szorc
dagop: extract descendants() from revlog module
Fri, 28 Sep 2018 10:03:32 -0700, by Gregory Szorc
filelog: remove checkhash() (API)
Fri, 28 Sep 2018 09:33:05 -0700, by Gregory Szorc
filelog: remove revdiff() (API)
Fri, 28 Sep 2018 09:28:38 -0700, by Gregory Szorc
localrepo: define storage backend in creation options (API)
Fri, 28 Sep 2018 09:46:50 -0700, by Gregory Szorc
wireprotov2: derive "required" from presence of default value
Thu, 27 Sep 2018 09:23:17 -0700, by Gregory Szorc
localrepo: capture repo interface factory functions as lambas
Mon, 01 Oct 2018 09:05:40 -0700, by Gregory Szorc
extensions: new closehead module for closing arbitrary heads
Mon, 14 May 2018 00:43:07 +0200, by Joerg Sonnenberger
cext: use modern buffer protocol in mpatch_flist()
Tue, 02 Oct 2018 13:12:56 -0700, by Gregory Szorc
cext: use modern buffer protocol in patches()
Tue, 02 Oct 2018 13:13:03 -0700, by Gregory Szorc
identify: when using -T, avoid unnecessary remote bookmarks query
Mon, 01 Oct 2018 14:44:27 -0400, by Valentin Gatien-Baron
identify: only query remote bookmarks if needed
Mon, 01 Oct 2018 09:58:42 -0400, by Valentin Gatien-Baron
py3: whitelist another passing tests caught by buildbot
Wed, 03 Oct 2018 13:59:19 +0300, by Pulkit Goyal
manifest: remove an unused variable caught by pyflakes
Wed, 03 Oct 2018 13:55:51 +0300, by Pulkit Goyal
setup: ignore message about disabling 3rd party extensions because of version
Tue, 02 Oct 2018 22:40:01 -0400, by Matt Harbison
narrow: avoid overwriting a variable
Tue, 02 Oct 2018 09:11:18 -0700, by Martin von Zweigbergk
treemanifests: remove _loadalllazy in _diff()
Thu, 27 Sep 2018 20:16:48 -0700, by spectral
treemanifests: skip extraneous check for item before calling _loadlazy
Tue, 02 Oct 2018 13:41:00 -0700, by spectral
treemanifests: make _loadchildrensetlazy just call _loadlazy
Tue, 02 Oct 2018 13:38:26 -0700, by spectral
treemanifests: make _loadlazy tolerate item not on _lazydirs
Tue, 02 Oct 2018 13:37:12 -0700, by spectral
debugcommands: add a debugindexstats command
Wed, 08 Aug 2018 23:17:16 -0700, by Martin von Zweigbergk
rust-chg: add main program
Mon, 24 Sep 2018 19:23:50 +0900, by Yuya Nishihara
rust-chg: add interface to chdir the server
Mon, 24 Sep 2018 19:06:30 +0900, by Yuya Nishihara
rust-chg: add Client extensions to run cHg-specific requests
Mon, 24 Sep 2018 18:57:54 +0900, by Yuya Nishihara
rust-chg: port basic socket path handling from cHg of C
Mon, 24 Sep 2018 18:33:46 +0900, by Yuya Nishihara
rust-chg: add state machine to handle "runcommand" request with cHg extension
Mon, 24 Sep 2018 18:21:10 +0900, by Yuya Nishihara
rust-chg: add callback to handle pager and shell command requests
Mon, 24 Sep 2018 18:18:35 +0900, by Yuya Nishihara
rust-chg: add low-level function to set pager fd blocking
Sat, 29 Sep 2018 21:59:07 +0900, by Yuya Nishihara
rust-chg: add future that handles "attachio" request
Mon, 24 Sep 2018 16:59:12 +0900, by Yuya Nishihara
rust-chg: add parser for request messages sent to "S" channel
Mon, 24 Sep 2018 16:33:24 +0900, by Yuya Nishihara
rust-chg: add wrapper around C function
Mon, 24 Sep 2018 16:22:03 +0900, by Yuya Nishihara
rust-chg: add function to send fds via domain socket
Mon, 24 Sep 2018 16:14:35 +0900, by Yuya Nishihara
rust-chg: update dependencies
Mon, 24 Sep 2018 15:57:28 +0900, by Yuya Nishihara
rust-chg: add project skeleton
Mon, 24 Sep 2018 15:54:18 +0900, by Yuya Nishihara
narrow: move copies overrides to core
Fri, 28 Sep 2018 12:56:57 -0700, by Martin von Zweigbergk
narrow: pass old includes and excludes to _widen()
Sun, 30 Sep 2018 18:45:16 +0300, by Pulkit Goyal
narrow: check for servers' narrow support before doing anything (BC)
Fri, 28 Sep 2018 23:53:09 +0300, by Pulkit Goyal
narrow: don't do the dirstate dance if ellipses is not enabled
Sun, 30 Sep 2018 18:59:27 +0300, by Pulkit Goyal
narrow: pass 'narrow_widen' as source while generating changegroup
Fri, 28 Sep 2018 19:21:24 +0300, by Pulkit Goyal
narrow: factor out logic to create cg while widening into separate fn
Fri, 28 Sep 2018 19:18:17 +0300, by Pulkit Goyal
narrow: avoid looking up dirstate again when editing dirstate
Mon, 01 Oct 2018 15:29:31 -0700, by Martin von Zweigbergk
repo: move unfiltered-repo optimization to workingctx
Wed, 26 Sep 2018 23:09:28 -0700, by Martin von Zweigbergk
context: move logic from changectx.__init__ to localrepo.__getitem__ (API)
Wed, 26 Sep 2018 22:53:14 -0700, by Martin von Zweigbergk
context: reduce dependence of changectx constructor
Wed, 26 Sep 2018 22:44:51 -0700, by Martin von Zweigbergk
py3: use system strings for HTTP response header comparison
Mon, 01 Oct 2018 23:11:07 -0700, by Gregory Szorc
py3: convert HTTP request headers to str
Mon, 01 Oct 2018 23:08:04 -0700, by Gregory Szorc
py3: use system strings in HTTP server code
Mon, 01 Oct 2018 23:12:42 -0700, by Gregory Szorc
py3: byteify test-storage.py
Mon, 01 Oct 2018 23:39:49 -0700, by Gregory Szorc
narrow: remove narrowpatch instead of narrowcopies
Tue, 02 Oct 2018 14:29:56 +0300, by Pulkit Goyal
py3: suppress the output from .write() calls in more tests
Mon, 01 Oct 2018 23:26:24 -0400, by Matt Harbison
py3: byteify test-lfs.t
Mon, 01 Oct 2018 23:07:19 -0400, by Matt Harbison
lfs: explicitly name a key when sorting blob pointers
Mon, 01 Oct 2018 23:04:58 -0400, by Matt Harbison
py3: byteify test-lock.py
Mon, 01 Oct 2018 21:54:00 -0400, by Matt Harbison
py3: byteify contrib/dumprevlog
Mon, 01 Oct 2018 21:48:45 -0400, by Matt Harbison
py3: quote $PYTHON in test-merge-symlinks.t
Mon, 01 Oct 2018 19:39:05 -0400, by Matt Harbison
copies: inline a variable that's used only once
Thu, 21 Jun 2018 22:07:34 -0700, by Martin von Zweigbergk
bundlerepo: remove a variable alias
Sat, 15 Sep 2018 22:56:57 -0700, by Martin von Zweigbergk
merge with stable
Mon, 01 Oct 2018 16:11:48 -0400, by Augie Fackler
Added signature for changeset 5405cb1a7901 stable
Mon, 01 Oct 2018 16:07:38 -0400, by Augie Fackler
Added tag 4.7.2 for changeset 5405cb1a7901 stable
Mon, 01 Oct 2018 16:07:36 -0400, by Augie Fackler
manifest: fix out-of-bounds read of corrupted manifest entry stable 4.7.2
Wed, 05 Sep 2018 21:23:29 +0900, by Yuya Nishihara
manifest: rewrite pathlen() to not cross entry boundary stable
Wed, 05 Sep 2018 21:32:45 +0900, by Yuya Nishihara
narrow: move support for `hg verify` into core
Fri, 28 Sep 2018 12:05:48 -0700, by Martin von Zweigbergk
narrow: drop unnecessary overrides of patch
Fri, 28 Sep 2018 13:55:17 -0700, by Martin von Zweigbergk
tests: add test showing that paths outside narrowspec are not added
Fri, 28 Sep 2018 00:00:36 -0700, by Martin von Zweigbergk
catapipe: fix bug introduced when switching to the timer api
Mon, 01 Oct 2018 09:05:41 -0400, by Augie Fackler
narrow: move the ellipses server capability to core
Sun, 30 Sep 2018 03:45:51 +0530, by Pulkit Goyal
narrow: move the wireprotocol narrow capability name to core
Sun, 30 Sep 2018 03:42:35 +0530, by Pulkit Goyal
help: document about "files" template keywords
Sun, 30 Sep 2018 16:11:35 +0900, by Yuya Nishihara
formatter: remove experimental marker from -T option
Sun, 30 Sep 2018 15:53:36 +0900, by Yuya Nishihara
grep: rename {line_number} to {lineno} as well (BC)
Sun, 30 Sep 2018 15:37:09 +0900, by Yuya Nishihara
annotate: rename {line_number} to {lineno} (BC)
Sun, 30 Sep 2018 15:35:17 +0900, by Yuya Nishihara
resolve: rename {status} to {mergestatus} to not shadow change status (BC)
Sun, 30 Sep 2018 15:15:27 +0900, by Yuya Nishihara
py3: whitelist one additional test
Mon, 01 Oct 2018 09:06:01 -0400, by Augie Fackler
logtoprocess: connect all fds to /dev/null to avoid bad interaction with pager
Fri, 03 Nov 2017 21:11:07 +0100, by Boris Feld
logtoprocess: add a test to show pager and ltp bad interaction
Fri, 03 Nov 2017 21:35:36 +0100, by Boris Feld
py3: add one more passing test to whitelist caught by buildbot
Sun, 30 Sep 2018 21:13:16 +0300, by Pulkit Goyal
cleanupnodes: pass multiple predecessors to `createmarkers` directly
Thu, 27 Sep 2018 12:06:32 +0200, by Boris Feld
obsolete: allow multiple predecessors in createmarkers
Sat, 22 Sep 2018 14:40:33 +0200, by Boris Feld
obsolete: preindent code in createmarkers
Wed, 26 Sep 2018 21:03:09 +0200, by Boris Feld
obsolete: explicitly pass relation items to effectflag computation
Wed, 26 Sep 2018 23:37:43 +0200, by Boris Feld
rebase: explicitly track collapses as fold
Wed, 26 Sep 2018 22:45:44 +0200, by Boris Feld
rebase: use tuple as `replacement` keys
Wed, 26 Sep 2018 23:51:11 +0200, by Boris Feld
rebase: expand a long "one-liner"
Thu, 27 Sep 2018 00:15:21 +0200, by Boris Feld
cleanupnodes: drop special casing around prune markers (API)
Wed, 26 Sep 2018 21:28:21 +0200, by Boris Feld
rebase: don't try to prune obsolete changeset already in the destination
Wed, 26 Sep 2018 22:05:28 +0200, by Boris Feld
histedit: don't cleanup nodes already disposed of
Wed, 26 Sep 2018 21:51:29 +0200, by Boris Feld
py3: avoid b'' output in test-hgweb-non-interactive.t
Sun, 30 Sep 2018 01:15:46 -0400, by Matt Harbison
py3: convert print to a function call in a few tests
Sun, 30 Sep 2018 01:10:41 -0400, by Matt Harbison
py3: use util.forcebytestr() to convert push lock error to bytes
Sat, 29 Sep 2018 23:52:00 -0400, by Matt Harbison
py3: byteify windows.shelltocmdexe()
Sat, 29 Sep 2018 20:57:49 -0400, by Matt Harbison
run-tests: flush output stream before prompting to accept changes
Sat, 29 Sep 2018 20:33:52 -0400, by Matt Harbison
py3: use util.forcebytestr() to convert error messages to bytes
Sun, 30 Sep 2018 05:52:42 +0530, by Pulkit Goyal
context: stop catching TypeError when converting hex nodeid to binary
Thu, 27 Sep 2018 14:26:02 -0700, by Martin von Zweigbergk
context: stop catching and re-raising FilteredRepoLookupError
Thu, 27 Sep 2018 09:56:13 -0700, by Martin von Zweigbergk
util: use a context manager in readlock()
Fri, 28 Sep 2018 22:18:45 -0400, by Matt Harbison
py3: convert os.readlink() path to native strings on Windows
Tue, 25 Sep 2018 21:16:12 -0400, by Matt Harbison
py3: suppress the output from .write() calls in the remaining tests
Sat, 29 Sep 2018 02:02:35 -0400, by Matt Harbison
py3: conditionalize json float precision difference in test-debugcommands.t
Fri, 28 Sep 2018 23:17:06 -0400, by Matt Harbison
py3: byteify extension in test-debugcommands.t
Fri, 28 Sep 2018 22:39:18 -0400, by Matt Harbison
pullreport: rev duplicated and extinct into account
Thu, 27 Sep 2018 16:55:06 +0200, by Boris Feld
pullreport: issue a message about "extinct" pulled changesets
Thu, 27 Sep 2018 16:52:25 +0200, by Boris Feld
pullreport: skip or rework some early return
Thu, 27 Sep 2018 17:00:00 +0200, by Boris Feld
pullreport: skip filtered revs instead of obsolete ones
Thu, 27 Sep 2018 16:35:10 +0200, by Boris Feld
pullreport: add a test to show misreporting of visible changeset
Thu, 27 Sep 2018 18:06:13 +0200, by Boris Feld
repo: don't look up context for tip node if it's not needed
Wed, 26 Sep 2018 10:38:37 -0700, by Martin von Zweigbergk
repo: look up nullrev context by revnum, not symbolic name
Wed, 26 Sep 2018 22:17:34 -0700, by Martin von Zweigbergk
bundle: consistently put revnums in "base" collection
Wed, 26 Sep 2018 22:17:26 -0700, by Martin von Zweigbergk
py3: ensure printing to stdout uses str in test-hgweb-no-request-uri.t
Thu, 27 Sep 2018 22:07:12 -0400, by Matt Harbison
scmutil: accept multiple predecessors in 'replacements' (API)
Thu, 27 Sep 2018 13:57:50 -0700, by Boris Feld
scmutil: expand long "one-liner"
Thu, 27 Sep 2018 13:54:37 -0700, by Boris Feld
shelve: find shelvedctx from bundle even if they are already in the repo
Thu, 20 Sep 2018 17:47:05 +0200, by Boris Feld
shelve: return the shelved node as part of bundle application
Wed, 19 Sep 2018 12:19:28 +0200, by Boris Feld
changelog: keep track of duplicated node in the transaction adding them
Thu, 20 Sep 2018 11:18:28 +0200, by Boris Feld
revlog: add a callback "tracking" duplicate node addition
Wed, 19 Sep 2018 21:02:47 +0200, by Boris Feld
logtoprocess: define $HG for children processes
Wed, 26 Sep 2018 18:30:19 -0400, by Valentin Gatien-Baron
py3: mask out None type when printing in `debuglocks`
Wed, 26 Sep 2018 22:21:25 -0400, by Matt Harbison
py3: ensure standard exceptions use `str` type strings in windows.py
Wed, 26 Sep 2018 21:25:18 -0400, by Matt Harbison
py3: replace a StandardError reference
Wed, 26 Sep 2018 20:49:28 -0400, by Matt Harbison
storageutil: extract revision number iteration
Mon, 24 Sep 2018 15:19:52 -0700, by Gregory Szorc
storageutil: new function for extracting metadata-less content from text
Mon, 24 Sep 2018 14:54:28 -0700, by Gregory Szorc
storageutil: move _censoredtext() from revlog
Mon, 24 Sep 2018 14:33:45 -0700, by Gregory Szorc
storageutil: move metadata parsing and packing from revlog (API)
Mon, 24 Sep 2018 14:31:31 -0700, by Gregory Szorc
storageutil: new module for storage primitives (API)
Mon, 24 Sep 2018 14:23:54 -0700, by Gregory Szorc
filelog: stop proxying deltaparent() (API)
Mon, 24 Sep 2018 13:35:50 -0700, by Gregory Szorc
filelog: stop proxying rawsize() (API)
Mon, 24 Sep 2018 12:49:17 -0700, by Gregory Szorc
filelog: stop proxying "opener" (API)
Mon, 24 Sep 2018 12:42:03 -0700, by Gregory Szorc
filelog: stop proxying flags() (API)
Mon, 24 Sep 2018 11:16:33 -0700, by Gregory Szorc
revlog: move revision verification out of verify
Mon, 24 Sep 2018 11:27:47 -0700, by Gregory Szorc
tests: de-flake test-narrow-debugrebuilddirstate.t
Wed, 26 Sep 2018 12:06:44 -0700, by Martin von Zweigbergk
upgrade: use storageinfo() for obtaining storage metadata
Mon, 24 Sep 2018 12:39:34 -0700, by Gregory Szorc
revlog: add method for obtaining storage info (API)
Mon, 24 Sep 2018 11:56:48 -0700, by Gregory Szorc
lfs: drop unused import
Wed, 26 Sep 2018 11:27:41 -0700, by Gregory Szorc
filelog: drop _generaldelta attribute (API)
Mon, 24 Sep 2018 10:08:58 -0700, by Gregory Szorc
revlog: drop emitrevisiondeltas() and associated functionality (API)
Mon, 24 Sep 2018 09:59:19 -0700, by Gregory Szorc
changegroup: port to emitrevisions() (issue5976)
Fri, 21 Sep 2018 18:47:04 -0700, by Gregory Szorc
wireprotov2server: port to emitrevisions()
Mon, 24 Sep 2018 09:48:02 -0700, by Gregory Szorc
tests: use more complex file storage test
Fri, 21 Sep 2018 14:54:59 -0700, by Gregory Szorc
revlog: new API to emit revision data
Fri, 21 Sep 2018 14:28:21 -0700, by Gregory Szorc
changegroup: remove reordering control (BC)
Mon, 24 Sep 2018 09:41:42 -0700, by Gregory Szorc
filelog: drop index attribute (API)
Thu, 20 Sep 2018 19:31:07 -0700, by Gregory Szorc
upgrade: use rawsize() instead of revlog index
Mon, 24 Sep 2018 09:38:27 -0700, by Gregory Szorc
manifest: add rawsize() proxy (API)
Thu, 20 Sep 2018 19:20:01 -0700, by Gregory Szorc
upgrade: report size of backing files, not internal storage size
Mon, 24 Sep 2018 09:37:19 -0700, by Gregory Szorc
filelog: store filename directly on revlog instance
Thu, 20 Sep 2018 18:07:42 -0700, by Gregory Szorc
lfs: access revlog directly
Thu, 20 Sep 2018 17:47:34 -0700, by Gregory Szorc
largefiles: automatically load largefiles extension when required (BC)
Thu, 20 Sep 2018 15:30:00 -0700, by Gregory Szorc
lfs: don't add extension to hgrc after clone or share (BC)
Thu, 20 Sep 2018 15:18:13 -0700, by Gregory Szorc
localrepo: automatically load lfs extension when required (BC)
Thu, 20 Sep 2018 15:06:43 -0700, by Gregory Szorc
lfs: add repository feature denoting the use of LFS
Wed, 19 Sep 2018 13:48:59 -0700, by Gregory Szorc
localrepo: define "features" on repository instances (API)
Wed, 19 Sep 2018 14:36:57 -0700, by Gregory Szorc
localrepo: support writing shared file (API)
Wed, 19 Sep 2018 17:27:37 -0700, by Gregory Szorc
localrepo: support shared repo creation
Wed, 19 Sep 2018 17:05:59 -0700, by Gregory Szorc
localrepo: validate directories before creating any
Wed, 19 Sep 2018 16:51:57 -0700, by Gregory Szorc
localrepo: add missing join()
Wed, 19 Sep 2018 16:15:22 -0700, by Gregory Szorc
revlog: use proper version comparison during verify
Wed, 19 Sep 2018 11:38:05 -0700, by Gregory Szorc
filelog: stop proxying checksize() (API)
Wed, 19 Sep 2018 11:22:56 -0700, by Gregory Szorc
filelog: remove version attribute (API)
Wed, 19 Sep 2018 11:20:02 -0700, by Gregory Szorc
verify: start to abstract file verification
Wed, 19 Sep 2018 11:17:28 -0700, by Gregory Szorc
unionrepo: remove _constructmanifest()
Mon, 24 Sep 2018 08:58:57 -0700, by Gregory Szorc

less more | rev 40800: (0) -30000 -10000 -3000 -1000 -960 +960 +1000 +3000 +10000 tip

Mercurial > hg

graph