Mercurial > hg
graph
-
win32mbcs: drop code that was catering to Python 2.3 and earlierMon, 21 Nov 2016 17:48:13 -0500, by Augie Fackler
-
httppeer: drop an except block that says it happens only on Python 2.3Mon, 21 Nov 2016 17:47:11 -0500, by Augie Fackler
-
windows: do not replace sys.stdout by winstdoutFri, 21 Oct 2016 00:03:46 +0900, by Yuya Nishihara
-
py3: bulk replace sys.stdin/out/err by util'sThu, 20 Oct 2016 23:53:36 +0900, by Yuya Nishihara
-
py3: provide bytes stdin/out/err through util moduleThu, 20 Oct 2016 23:40:24 +0900, by Yuya Nishihara
-
util: rewrite pycompat imports to make pyflakes always happyFri, 21 Oct 2016 00:09:38 +0900, by Yuya Nishihara
-
windows: do not replace sys.__stdout__Thu, 20 Oct 2016 23:27:09 +0900, by Yuya Nishihara
-
py3: update test-check-py3-compat.t outputMon, 21 Nov 2016 15:38:56 +0530, by Pulkit Goyal
-
py3: use pycompat.sysargv in dispatch.run()Mon, 21 Nov 2016 15:35:22 +0530, by Pulkit Goyal
-
py3: use pycompat.sysargv in scmposix.systemrcpath()Mon, 21 Nov 2016 15:26:47 +0530, by Pulkit Goyal
-
wireproto: perform chunking and compression at protocol layer (API)Sun, 20 Nov 2016 13:50:45 -0800, by Gregory Szorc
-
httppeer: use compression engine API for decompressing responsesSun, 20 Nov 2016 13:55:53 -0800, by Gregory Szorc
-
httppeer: do decompression inside _callstreamSat, 19 Nov 2016 18:31:40 -0800, by Gregory Szorc
-
keepalive: reorder header precedenceSat, 19 Nov 2016 17:11:12 -0800, by Gregory Szorc
-
debuginstall: print compression engine supportSat, 19 Nov 2016 10:54:21 -0800, by Gregory Szorc
-
bdiff: don't check border condition in loopSun, 20 Nov 2016 16:56:21 -0800, by Gregory Szorc
-
conflicts: make spacing consistent in conflict markersSat, 19 Nov 2016 15:41:37 -0800, by Kostia Balytskyi
-
rebase: move bookmark update to before rebase clearingThu, 10 Nov 2016 09:21:41 -0800, by Durham Goode
-
setup: include a dummy $PATH in the custom environment used by build.pyFri, 28 Oct 2016 17:44:28 +0200, by Gábor Stefanik
-
shelve: move unshelve-finishing logic to a separate functionFri, 11 Nov 2016 07:01:27 -0800, by Kostia Balytskyi
-
shelve: move file-forgetting logic to a separate functionThu, 10 Nov 2016 11:02:39 -0800, by Kostia Balytskyi
-
shelve: move rebasing logic to a separate functionThu, 10 Nov 2016 10:57:10 -0800, by Kostia Balytskyi
-
shelve: move commit restoration logic to a separate functionThu, 10 Nov 2016 10:51:06 -0800, by Kostia Balytskyi
-
shelve: move temporary commit creation to a separate functionSun, 13 Nov 2016 03:35:52 -0800, by Kostia Balytskyi
-
commands: print chunk type in debugrevlogThu, 17 Nov 2016 20:30:00 -0800, by Gregory Szorc
-
perf: add command for measuring revlog chunk operationsThu, 17 Nov 2016 20:17:51 -0800, by Gregory Szorc
-
setup: add flag to build_ext to control building zstdThu, 17 Nov 2016 20:09:10 -0800, by Gregory Szorc
-
drawdag: update test repos by drawing the changelog DAG in ASCIIWed, 09 Nov 2016 16:01:34 +0000, by Jun Wu
-
posix: give checklink a fast path that cache the check file and is read onlyWed, 14 Jan 2015 01:15:26 +0100, by Mads Kiilerich
-
posix: move checklink test file to .hg/cacheThu, 17 Nov 2016 12:59:36 +0100, by Mads Kiilerich
-
posix: give checkexec a fast path; keep the check files and test read onlyWed, 14 Jan 2015 01:15:26 +0100, by Mads Kiilerich
-
posix: simplify checkexec checkWed, 14 Jan 2015 01:15:26 +0100, by Mads Kiilerich
-
posix: move checkexec test file to .hg/cacheThu, 17 Nov 2016 12:59:36 +0100, by Mads Kiilerich
-
manifest: move manifestctx creation into manifestlog.get()Thu, 17 Nov 2016 15:31:19 -0800, by Durham Goode
-
util: implement zstd compression engineFri, 11 Nov 2016 01:10:07 -0800, by Gregory Szorc
-
hghave: add check for zstd supportThu, 10 Nov 2016 23:38:41 -0800, by Gregory Szorc
-
exchange: obtain compression engines from the registrarThu, 10 Nov 2016 23:34:15 -0800, by Gregory Szorc
-
bundle2: equate 'UN' with no compressionThu, 10 Nov 2016 23:29:01 -0800, by Gregory Szorc
-
util: check for compression engine availability before returningThu, 10 Nov 2016 23:15:02 -0800, by Gregory Szorc
-
util: expose an "available" API on compression enginesThu, 10 Nov 2016 23:03:48 -0800, by Gregory Szorc
-
setup: compile zstd C extensionThu, 10 Nov 2016 22:26:35 -0800, by Gregory Szorc
-
zstd: vendor python-zstandard 0.5.0Thu, 10 Nov 2016 22:15:58 -0800, by Gregory Szorc
-
zstd: vendor zstd 1.1.1Thu, 10 Nov 2016 21:45:29 -0800, by Gregory Szorc
-
bdiff: give slight preference to removing trailing linesTue, 15 Nov 2016 21:56:49 +0100, by Mads Kiilerich
-
bdiff: give slight preference to appending linesTue, 15 Nov 2016 21:56:49 +0100, by Mads Kiilerich
-
bdiff: give slight preference to longest matches in the middle of the B sideTue, 08 Nov 2016 18:37:33 +0100, by Mads Kiilerich
-
bdiff: rearrange the "better longest match" codeTue, 08 Nov 2016 18:37:33 +0100, by Mads Kiilerich
-
bdiff: adjust criteria for getting optimal longest match in the A side middleTue, 08 Nov 2016 18:37:33 +0100, by Mads Kiilerich
-
tests: explore some bdiff casesTue, 08 Nov 2016 18:37:33 +0100, by Mads Kiilerich
-
tests: make test-bdiff.py easier to maintainTue, 15 Nov 2016 21:56:49 +0100, by Mads Kiilerich
-
perf: unbust perfbdiff --alldataThu, 17 Nov 2016 08:52:52 -0800, by Gregory Szorc
-
worker: discard waited pid by anyone who noticed it firstThu, 17 Nov 2016 20:57:09 +0900, by Yuya Nishihara
-
worker: kill workers after all zombie processes are reapedThu, 17 Nov 2016 21:08:58 +0900, by Yuya Nishihara
-
worker: make sure killworkers() never be interrupted by another SIGCHLDThu, 17 Nov 2016 20:44:05 +0900, by Yuya Nishihara
-
worker: fix missed break on successful waitpid()Thu, 17 Nov 2016 21:43:01 +0900, by Yuya Nishihara
-
filterpyflakes: dramatically simplify the entire thing by blacklistingThu, 10 Nov 2016 16:49:42 -0500, by Augie Fackler
-
run-tests: forward Python USER_BASE from site (issue5425)Thu, 10 Nov 2016 16:07:24 -0500, by Augie Fackler
-
util: improve iterfile so it chooses code path wiselyTue, 15 Nov 2016 20:25:51 +0000, by Jun Wu
-
merge with stableWed, 16 Nov 2016 23:29:28 -0500, by Augie Fackler
-
worker: stop using a separate thread waiting for childrenSat, 12 Nov 2016 03:06:07 +0000, by Jun Wu
-
worker: add a SIGCHLD handler to collect worker immediatelySat, 12 Nov 2016 03:07:22 +0000, by Jun Wu
-
worker: make waitforworkers reentrantTue, 15 Nov 2016 02:12:16 +0000, by Jun Wu
-
worker: change "pids" to a setTue, 15 Nov 2016 02:10:40 +0000, by Jun Wu
-
worker: allow waitforworkers to be non-blockingThu, 28 Jul 2016 20:57:07 +0100, by Jun Wu
-
worker: wait worker pid explicitlyThu, 28 Jul 2016 20:51:20 +0100, by Jun Wu
-
worker: move killworkers and waitforworkers upThu, 28 Jul 2016 20:49:57 +0100, by Jun Wu
-
osutil: implement setprocname to set process title for some platformsFri, 11 Nov 2016 21:11:17 +0000, by Jun Wu
-
setup: test setproctitle before building osutilFri, 11 Nov 2016 20:45:40 +0000, by Jun Wu
-
patch: remove unused git parameter from patch.diffstat()Sat, 12 Nov 2016 13:36:17 +0100, by Henning Schild
-
perf: add asv benchmarksThu, 29 Sep 2016 10:16:34 +0200, by Philippe Pepiot
-
perf: omit copying ui and redirect to ferr if buffer API is in useTue, 15 Nov 2016 16:10:57 +0100, by Philippe Pepiot
-
manifest: change treemanifestctx to construct subtrees from the manifestlogMon, 14 Nov 2016 15:24:07 -0800, by Durham Goode
-
manifest: make revlog verification optionalMon, 14 Nov 2016 15:17:27 -0800, by Durham Goode
-
debugcommands: move debugbuilddagThu, 10 Nov 2016 09:45:42 -0800, by Gregory Szorc
-
debugcommands: introduce standalone module for debug commandsWed, 17 Aug 2016 21:07:38 -0700, by Gregory Szorc
-
convert: migrate to util.iterfileMon, 14 Nov 2016 23:17:15 +0000, by Jun Wu
-
match: migrate to util.iterfileMon, 14 Nov 2016 23:16:05 +0000, by Jun Wu
-
store: migrate to util.iterfileMon, 14 Nov 2016 23:15:01 +0000, by Jun Wu
-
patch: migrate to util.iterfileMon, 14 Nov 2016 23:14:06 +0000, by Jun Wu
-
worker: migrate to util.iterfileMon, 14 Nov 2016 23:12:11 +0000, by Jun Wu
-
util: add iterfile to workaround a fileobj.__iter__ issue with EINTRMon, 14 Nov 2016 23:32:54 +0000, by Jun Wu
-
filterpyflakes: whitelist listcomp aliasing checkingThu, 10 Nov 2016 16:37:18 -0500, by Augie Fackler
-
verify: avoid shadowing two variables with a list comprehensionThu, 10 Nov 2016 16:35:54 -0500, by Augie Fackler
-
revset: avoid shadowing a variable with a list comprehensionThu, 10 Nov 2016 16:35:10 -0500, by Augie Fackler
-
revlog: avoid shadowing several variables using list comprehensionsThu, 10 Nov 2016 16:34:43 -0500, by Augie Fackler
-
minirst: avoid shadowing a variable in a list comprehensionThu, 10 Nov 2016 16:33:41 -0500, by Augie Fackler
-
hbisect: avoid shadowing a variable in a list comprehensionThu, 10 Nov 2016 16:33:23 -0500, by Augie Fackler
-
filemerge: avoid shadowing a variable in a list comprehensionThu, 10 Nov 2016 16:33:07 -0500, by Augie Fackler
-
color: avoid shadowing a variable inside a list comprehensionThu, 10 Nov 2016 16:32:51 -0500, by Augie Fackler
-
memory: avoid shadowing variables inside a list comprehensionThu, 10 Nov 2016 16:32:38 -0500, by Augie Fackler
-
shelve: move shelve-finishing logic to a separate functionThu, 10 Nov 2016 03:15:41 -0800, by Kostia Balytskyi
-
shelve: move unknown files handling to a separate functionThu, 10 Nov 2016 03:20:28 -0800, by Kostia Balytskyi
-
shelve: move actual created commit shelving to a separate functionThu, 10 Nov 2016 03:07:20 -0800, by Kostia Balytskyi
-
shelve: move 'nothing changed' messaging to a separate functionThu, 10 Nov 2016 03:33:01 -0800, by Kostia Balytskyi
-
shelve: move commitfunc creation to a separate functionThu, 10 Nov 2016 03:26:31 -0800, by Kostia Balytskyi
-
shelve: move mutableancestors to not be a closureThu, 10 Nov 2016 03:24:07 -0800, by Kostia Balytskyi
-
shelve: move shelve name generation to a separate functionThu, 10 Nov 2016 03:22:55 -0800, by Kostia Balytskyi
-
shelve: move possible shelve file extensions to a single placeThu, 10 Nov 2016 03:07:20 -0800, by Kostia Balytskyi
-
manifest: delete manifest.manifest classThu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
-
localrepo: delete localrepo.manifestThu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
-
manifest: remove last uses of repo.manifestThu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
-
manifest: add unionmanifestlog supportFri, 11 Nov 2016 01:20:13 -0800, by Durham Goode
-
manifest: add bundlemanifestlog supportFri, 11 Nov 2016 01:15:59 -0800, by Durham Goode
-
manifest: make manifestlog use it's own cacheThu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
-
manifest: delete unused dirlog and _newmanifest functionsThu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
-
manifest: move clearcaches to manifestlogThu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
-
manifest: remove usages of manifest.readThu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
-
manifest: remove dependency on manifestrevlog being able to create treesThu, 10 Nov 2016 02:13:19 -0800, by Durham Goode
-
color: show mode warning based on ui.formattedFri, 11 Nov 2016 13:06:05 +1100, by Xidorn Quan
-
protocol: drop unused import of zlibThu, 10 Nov 2016 15:14:05 -0500, by Augie Fackler
-
hook: lower inflated use of sys.__stdout__ and __stderr__Tue, 08 Nov 2016 22:41:45 +0900, by Yuya Nishihara
-
hook: flush stdout before restoring stderr redirectionTue, 08 Nov 2016 22:22:22 +0900, by Yuya Nishihara
-
hook: do not redirect stdout/err/in to ui while running in-process hooks (BC)Thu, 20 Oct 2016 22:39:59 +0900, by Yuya Nishihara
-
merge: change modified indicator to be 20 bytesThu, 10 Nov 2016 02:21:15 -0800, by Durham Goode
-
dirstate: change added/modified placeholder hash length to 20 bytesThu, 10 Nov 2016 02:19:16 -0800, by Durham Goode
-
dirstate: change placeholder hash length to 20 bytesThu, 10 Nov 2016 02:17:22 -0800, by Durham Goode
-
util: remove compressorobj API from compression enginesMon, 07 Nov 2016 18:57:54 -0800, by Gregory Szorc
-
hgweb: use compression engine API for zlib compressionMon, 07 Nov 2016 18:54:35 -0800, by Gregory Szorc
-
bundle2: use compressstream compression engine APIMon, 07 Nov 2016 18:46:37 -0800, by Gregory Szorc