Mercurial: revision graph

graph

less more | rev 39506: (0) -30000 -10000 -3000 -1000 -120 +120 +1000 +3000 +10000 tip

sparse-revlog: set max delta chain length to on thousand
Fri, 07 Sep 2018 11:18:45 -0400, by Boris Feld
snapshot: also consider the snapshot chain of one unrelated revision
Fri, 07 Sep 2018 11:18:45 -0400, by Boris Feld
snapshot: extract parent chain computation
Fri, 07 Sep 2018 11:17:37 -0400, by Boris Feld
snapshot: refine candidate snapshot base upward
Fri, 07 Sep 2018 11:17:36 -0400, by Boris Feld
snapshot: try to refine new snapshot base down the chain
Fri, 07 Sep 2018 11:17:35 -0400, by Boris Feld
snapshot: make sure we'll never refine delta base from a reused source
Fri, 07 Sep 2018 11:17:34 -0400, by Boris Feld
snapshot: turn _refinedgroups into a coroutine
Fri, 07 Sep 2018 11:17:34 -0400, by Boris Feld
snapshot: also use None as a stop value for `_refinegroup`
Fri, 07 Sep 2018 11:17:33 -0400, by Boris Feld
snapshot: add refining logic at the findeltainfo level
Fri, 07 Sep 2018 11:17:33 -0400, by Boris Feld
snapshot: use None as a stop value when looking for a good delta
Fri, 07 Sep 2018 11:17:32 -0400, by Boris Feld
snapshot: introduce an intermediate `_refinedgroups` generator
Fri, 07 Sep 2018 11:17:32 -0400, by Boris Feld
snapshot: consider unrelated snapshots at a similar level first
Fri, 07 Sep 2018 11:17:31 -0400, by Boris Feld
snapshot: consider all snapshots in the parents' chains
Fri, 07 Sep 2018 11:17:30 -0400, by Boris Feld
snapshot: search for unrelated but reusable full-snapshot
Fri, 07 Sep 2018 11:17:30 -0400, by Boris Feld
snapshot: try intermediate snapshot against parents' base
Fri, 07 Sep 2018 11:17:29 -0400, by Boris Feld
sparse-revlog: add a test checking revlog deltas for a churning file
Mon, 10 Sep 2018 09:08:24 -0700, by Boris Feld
tests: add a `tests/artifacts/` directory
Sat, 18 Aug 2018 12:45:44 +0200, by Boris Feld
verify: make output less confusing (issue5924)
Wed, 05 Sep 2018 01:19:48 +0300, by Meirambek Omyrzak
revlog: clarify the comment attached to delta reuse
Tue, 04 Sep 2018 21:28:28 +0200, by Boris Feld
revlog: drop duplicated code
Tue, 04 Sep 2018 21:05:21 +0200, by Boris Feld
wireprotov2peer: properly format errors
Wed, 05 Sep 2018 09:04:40 -0700, by Gregory Szorc
wireprotov2peer: report exceptions in frame handling against request future
Thu, 23 Aug 2018 13:50:47 -0700, by Gregory Szorc
httppeer: use util.readexactly() to abort on incomplete responses
Sat, 08 Sep 2018 21:58:51 +0800, by Anton Shestakov
httppeer: calculate total expected bytes correctly
Sat, 08 Sep 2018 23:57:07 +0800, by Anton Shestakov
lazyancestors: reuse __iter__ implementation in __contains__
Fri, 07 Sep 2018 23:36:09 -0700, by Martin von Zweigbergk
lazyancestors: extract __iter__ to free function
Sun, 09 Sep 2018 23:16:55 -0700, by Martin von Zweigbergk
phase: report number of non-public changeset alongside the new range
Thu, 30 Aug 2018 01:53:21 +0200, by Boris Feld
tests: disable test-nointerrupt on Windows
Fri, 07 Sep 2018 23:54:42 -0400, by Matt Harbison
tests: conditionalize an error message about unlinking a non empty directory
Fri, 07 Sep 2018 23:39:49 -0400, by Matt Harbison
ancestors: add nullrev to set from the beginning
Fri, 07 Sep 2018 14:48:38 -0700, by Martin von Zweigbergk
ancestor: filter out initial revisions lower than stoprev
Sat, 08 Sep 2018 10:59:24 +0900, by Yuya Nishihara
ancestor: add test showing inconsistency between __iter__ and __contains__
Sat, 08 Sep 2018 10:48:42 +0900, by Yuya Nishihara
ancestors: ensure a consistent order even in the "inclusive" case
Thu, 06 Sep 2018 19:37:38 -0400, by Boris Feld
ancestors: actually iterate over ancestors in topological order (issue5979)
Thu, 06 Sep 2018 17:00:28 -0400, by Boris Feld
doc: use modern import style in runrst
Thu, 06 Sep 2018 22:12:21 +0900, by Yuya Nishihara
hgweb: do not audit URL path as working-directory path
Sun, 26 Aug 2018 22:18:09 +0900, by Yuya Nishihara
hgweb: map Abort to 403 error to report inaccessible path for example
Sun, 26 Aug 2018 22:23:25 +0900, by Yuya Nishihara
hgweb: add error template to json so it won't crash
Fri, 07 Sep 2018 22:19:28 +0900, by Yuya Nishihara
hgweb: show shortlog by default in json output (issue5978)
Fri, 07 Sep 2018 22:12:46 +0900, by Yuya Nishihara
merge with stable
Fri, 07 Sep 2018 11:35:43 -0400, by Augie Fackler
tests: improve the widening testing in test-narrow-widen*
Tue, 04 Sep 2018 15:16:22 +0300, by Pulkit Goyal
narrow: use util.readfile() and improve error message using --narrowspec
Tue, 04 Sep 2018 19:26:50 +0300, by Pulkit Goyal
merge: use vfs methods for I/O
Tue, 04 Sep 2018 15:55:23 -0700, by Gregory Szorc
merge: move purge logic from extension
Thu, 06 Sep 2018 18:30:12 -0700, by Gregory Szorc
tests: stabilize test-removeemptydirs.t on Windows
Thu, 06 Sep 2018 23:37:24 -0400, by Matt Harbison
help: add internals.wireprotocolv2 to the table, and remove redundant header
Thu, 06 Sep 2018 21:55:30 +0900, by Yuya Nishihara
match: improve includematcher.visitchildrenset to be much faster and cached
Fri, 17 Aug 2018 19:18:53 -0700, by Kyle Lippincott
py3: add new passing tests spotted by the buildbot
Thu, 06 Sep 2018 03:21:05 +0530, by Pulkit Goyal
tests: order the imports in test-fastannotate-hg.t
Thu, 06 Sep 2018 03:24:27 +0530, by Pulkit Goyal
lfs: ensure the blob is linked to the remote store on skipped uploads
Thu, 06 Sep 2018 00:51:21 -0400, by Matt Harbison
cbor: teach the encoder to handle python `long` type for Windows
Tue, 04 Sep 2018 22:29:38 -0400, by Matt Harbison
buildrpm: remove TODO that looks done to me stable
Wed, 05 Sep 2018 16:39:47 -0400, by Augie Fackler
buildrpm: fix embarassing bug in shell variable expansions stable
Wed, 05 Sep 2018 16:29:31 -0400, by Augie Fackler
absorb: clarify the reason for not finding changesets to modify
Tue, 04 Sep 2018 20:48:22 -0400, by Matt Harbison
merge with stable
Wed, 05 Sep 2018 09:36:31 -0700, by Gregory Szorc
state: use our CBOR module
Tue, 04 Sep 2018 10:22:42 -0700, by Gregory Szorc
wireprotov2peer: use our CBOR decoder
Tue, 28 Aug 2018 15:41:09 -0700, by Gregory Szorc
debugcommands: use our CBOR decoder
Tue, 28 Aug 2018 15:37:55 -0700, by Gregory Szorc
wireprotov2server: use our CBOR encoder
Tue, 28 Aug 2018 18:12:04 -0700, by Gregory Szorc
wireprotoserver: use our CBOR encoder
Tue, 28 Aug 2018 18:05:48 -0700, by Gregory Szorc
wireprotoframing: use our CBOR module
Tue, 28 Aug 2018 18:05:08 -0700, by Gregory Szorc
httppeer: use our CBOR decoder
Tue, 28 Aug 2018 15:10:56 -0700, by Gregory Szorc
zsh_completion: complete shelve and unshelve
Wed, 22 Aug 2018 09:02:07 +0800, by Anton Shestakov
zsh_completion: use revsets to exclude this rev from suggestions to hg merge
Tue, 21 Aug 2018 20:30:53 +0800, by Anton Shestakov
drawdag: correctly pass repo to super constructor
Tue, 04 Sep 2018 10:36:34 -0700, by Martin von Zweigbergk
help: correct a typo in tweakdefaults
Tue, 04 Sep 2018 20:54:41 -0400, by Matt Harbison
narrow: add '--import-rules' flag to tracked command
Mon, 06 Aug 2018 14:06:19 +0300, by Pulkit Goyal
internals: extract wire protocol version 2 commands to standalone doc
Thu, 23 Aug 2018 13:11:13 -0700, by Gregory Szorc
wireprotov2peer: split responsedata handling into separate function
Thu, 23 Aug 2018 13:46:39 -0700, by Gregory Szorc
httppeer: add TODO about delayed handling of ^C
Wed, 22 Aug 2018 10:25:47 -0700, by Gregory Szorc
httppeer: log commands for version 2 peer
Fri, 31 Aug 2018 08:57:14 -0700, by Gregory Szorc
wireprotov2peer: add TODO about streaming responses
Wed, 22 Aug 2018 10:29:30 -0700, by Gregory Szorc
tests: update relnotes test for actual output
Tue, 04 Sep 2018 12:36:33 -0400, by Augie Fackler
py3: use print as a function in tests/test-hgweb.t
Tue, 04 Sep 2018 17:57:49 +0300, by Pulkit Goyal
py3: bytestr a bytes val to make sure we get bytechr while iterating
Tue, 04 Sep 2018 17:58:39 +0300, by Pulkit Goyal
py3: make regexes in hgext/keyword.py bytes
Tue, 04 Sep 2018 17:53:54 +0300, by Pulkit Goyal
py3: add more missing b'' prefixes in test files
Tue, 04 Sep 2018 17:33:59 +0300, by Pulkit Goyal
py3: write the file in str mode in tests/test-rename-merge2.t
Tue, 04 Sep 2018 17:33:22 +0300, by Pulkit Goyal
py3: add missing b'' prefixes in tests/badserverext.py
Tue, 04 Sep 2018 17:32:09 +0300, by Pulkit Goyal
py3: handle keyword arguments correctly in hgext/acl.py
Tue, 04 Sep 2018 17:19:30 +0300, by Pulkit Goyal
py3: don't return the revid as unicode in hgext/convert/subversion.py
Tue, 04 Sep 2018 17:16:29 +0300, by Pulkit Goyal
py3: make sure we pass str in os.sysconf in hgext/convert/common.py
Tue, 04 Sep 2018 17:15:17 +0300, by Pulkit Goyal
manifest: fix leak on error return from lazymanifest_filtercopy() stable
Wed, 05 Sep 2018 21:49:44 +0900, by Yuya Nishihara
manifest: incref/decref copy->pydata to clarify 'copy' holds a reference stable
Wed, 05 Sep 2018 21:46:53 +0900, by Yuya Nishihara
dirstate: use tuple interface to fix leak in pack_dirstate() stable
Wed, 05 Sep 2018 20:52:22 +0900, by Yuya Nishihara
xdiff: fix leak in hunk_consumer() stable
Wed, 05 Sep 2018 22:10:41 +0900, by Yuya Nishihara
base85: fix leak on error return from b85decode() stable
Wed, 05 Sep 2018 20:57:38 +0900, by Yuya Nishihara
merge with stable
Tue, 04 Sep 2018 12:16:28 -0400, by Augie Fackler
Added signature for changeset ede3bf31fe63 stable
Tue, 04 Sep 2018 11:59:12 -0400, by Augie Fackler
Added tag 4.7.1 for changeset ede3bf31fe63 stable
Tue, 04 Sep 2018 11:59:09 -0400, by Augie Fackler
hgweb: load revcount + 1 entries to fill nextentry in log page (issue5972) stable 4.7.1
Fri, 31 Aug 2018 21:44:24 +0900, by Yuya Nishihara
revlog: fix size of Python nodetree object
Tue, 04 Sep 2018 13:29:21 +0900, by Yuya Nishihara
revert: stabilize status message of chunks selected interactively
Mon, 03 Sep 2018 23:03:19 +0900, by Yuya Nishihara
cborutil: add a buffering decoder
Wed, 29 Aug 2018 14:29:01 -0700, by Gregory Szorc
cborutil: remove readindefinitebytestringtoiter()
Fri, 31 Aug 2018 15:54:17 -0700, by Gregory Szorc
cborutil: implement sans I/O decoder
Tue, 28 Aug 2018 15:02:48 -0700, by Gregory Szorc
tests: remove use of string in CBOR test
Tue, 28 Aug 2018 15:22:06 -0700, by Gregory Szorc
internals: document CBOR utilization
Tue, 28 Aug 2018 20:27:36 -0700, by Gregory Szorc
py3: add new passing test to whitelist found by buildbot
Mon, 03 Sep 2018 13:56:53 +0300, by Pulkit Goyal
py3: alias xrange to range in tests/test-fastannotate-revmap.py
Mon, 03 Sep 2018 13:53:30 +0300, by Pulkit Goyal
py3: add r'' prefix to prevent b'' being prepended
Mon, 03 Sep 2018 13:52:49 +0300, by Pulkit Goyal
revert: fix the inconsistency of status msgs in --interactive mode
Fri, 31 Aug 2018 23:28:09 +0530, by Sushil khanchi
revert: remove unnecessary check as `msg` should never be a callable now
Mon, 03 Sep 2018 10:44:52 +0530, by Sushil khanchi
run-tests: drop support for --with-python3 and $PYTHON3
Sun, 02 Sep 2018 16:32:11 +0900, by Yuya Nishihara
test-check-py3-compat: don't run py3 part if not build against python3
Sun, 02 Sep 2018 16:26:33 +0900, by Yuya Nishihara
test-check-py3-compat: don't run py2 part if $PYTHON is python3
Sun, 02 Sep 2018 16:23:34 +0900, by Yuya Nishihara
resolve: test that we suggest a valid hg command
Sat, 01 Sep 2018 18:00:38 -0400, by Valentin Gatien-Baron
bash_completion: complete arguments for --color and --pager
Sun, 02 Sep 2018 08:40:57 +0800, by Anton Shestakov
bash_completion: add more global options that receive an argument
Sun, 02 Sep 2018 08:39:17 +0800, by Anton Shestakov
tracing: ignore any IOErrors when writing to pipe
Sat, 01 Sep 2018 11:33:17 -0400, by Augie Fackler
tests: avoid shellquoting bytes on Python 3
Sat, 01 Sep 2018 11:06:47 -0400, by Augie Fackler
resolve: ui.config -> ui.configbool, for better validation
Sat, 01 Sep 2018 17:37:52 -0400, by Valentin Gatien-Baron
zsh_completion: handle --rev as well as -r for diff and revert
Wed, 22 Aug 2018 09:12:22 +0800, by Anton Shestakov
resolve: add config to make hg resolve not re-merge by default
Sun, 26 Aug 2018 16:42:28 -0400, by Valentin Gatien-Baron
resolve: add a flag for the default behavior of re-merging
Sun, 26 Aug 2018 15:52:34 -0400, by Valentin Gatien-Baron
tests: conditionalize narrow-widen error output for Windows
Sat, 01 Sep 2018 02:01:55 -0400, by Matt Harbison
largefiles: use a context manager to control the progress bar lifetime
Sat, 25 Aug 2018 13:09:24 -0400, by Matt Harbison
lfs: use a context manager to control the progress bar lifetime
Sat, 25 Aug 2018 12:41:58 -0400, by Matt Harbison
hg: ensure the progress bar is completed when copying the store
Sat, 25 Aug 2018 12:26:44 -0400, by Matt Harbison
shelve: fix crash on unshelve without .shelve metadata file
Fri, 31 Aug 2018 21:10:28 +0900, by Yuya Nishihara

less more | rev 39506: (0) -30000 -10000 -3000 -1000 -120 +120 +1000 +3000 +10000 tip

Mercurial > hg

graph