merge with i18n

i18n-pt_BR: synchronized with 7b428b00a1d4

dirstate: fix debug.dirstate.delaywrite to use the new "now" after sleeping It seems like the a regression has sneaked into debug.dirstate.delaywrite in 6c6b48aca328. It would sleep until no files were modified "now" any more, but when writing the dirstate it would use the old "now" and still mark files as 'unset' instead of recording the timestamp that would make the file show up as clean instead of unknown. Instead of getting a new "now" from the file system, we trust the computed end time as the new "now" and thus cause the actual modification time to be writiten to the dirstate. debug.dirstate.delaywrite is undocumented and only used in test-largefiles-update.t . All tests seems to work fine for me without debug.dirstate.delaywrite . Perhaps because it not really worked as intended without the fix in this patch, and code and tests thus have evolved to do fine without it? It could thus perhaps make sense to drop usage of this setting in the tests. That could speed the test up a bit. This functionality (or something very similar) can however apparently be very convenient in setups where checking dirty-ness is expensive - such as when using large files and have slow file filesystems or are CPU constrained. Now it works and we can try it. (But ideally, for the largefile use case, it should probably only delay lfdirstate writes - not ordinary dirstate.)

tests: fix test-casefolding.t The message had changed, but the test was not updated. This test does not run on Linux, but failed on my Mac.

commands: print security protocol support in debuginstall Over the past week I've had to instruct multiple people to run Python code to query the ssl module to see what TLS protocol support is present. I think it would be useful for `hg debuginstall` to print this info to make it easier to access and debug why Mercurial is complaining about using an insecure TLS 1.0 protocol. Ideally we'd also print the path to the CA cert bundle. But the APIs for querying that in sslutil can emit warnings, making it slightly more difficult to integrate into `hg debuginstall`. That work will have to wait for another day.

manifest: make treemanifestctx store the repo Same as in the last commit, the old treemanifestctx stored a reference to the revlog. If the inmemory revlog became invalid, the ctx now held an old copy and would be incorrect. To fix this, we need the ctx to go through the manifestlog for each access. This is the same pattern that changectx already uses (it stores the repo, and accesses commit data through self._repo.changelog).

manifest: make manifestctx store the repo The old manifestctx stored a reference to the revlog. If the inmemory revlog became invalid, the ctx now held an old copy and would be incorrect. To fix this, we need the ctx to go through the manifestlog for each access. This is the same pattern that changectx already uses (it stores the repo, and accesses commit data through self._repo.changelog).

manifest: make manifestlog a storecache The old @property on manifestlog was broken. It meant that we would always recreate the manifestlog instance, which meant the cache was never hit. Since we'll eventually remove repo.manifest and make manifestlog the only property, let's go ahead and make manifestlog the @storecache property, have manifestlog own the manifest instance, and have repo.manifest refer to it via manifestlog. This means all accesses go through repo.manifestlog, which is now invalidated correctly.

manifest: move manifest creation to a helper function A future patch will be moving manifest creation to be inside manifestlog as part of improving our cache guarantees. bundlerepo and unionrepo currently rely on being able to hook into manifest creation, so let's temporarily move the actual manifest creation to a helper function for them to intercept. In the future manifest.manifest() will disappear entirely and this can disappear.

Added signature for changeset 438173c41587

Added tag 4.0-rc for changeset 438173c41587

merge default into stable for 4.0 code freeze

merge with i18n

i18n-pt_BR: synchronized with 149433e68974

changegroup: increase write buffer size to 128k By default, Python defers to the operating system for choosing the default buffer size on opened files. On my Linux machine, the default is 4k, which is really small for 2016. This patch bumps the write buffer size when writing changegroups/bundles to 128k. This matches the 128k read buffer we already use on revlogs. It's worth noting that this only impacts when writing to an explicit file (such as during `hg bundle`). Buffers when writing to bundle files via the repo vfs or to a temporary file are not impacted. When producing a none-v2 bundle file of the mozilla-unified repository, this change caused the number of write() system calls to drop from 952,449 to 29,788. After this change, the most frequent system calls are fstat(), read(), lseek(), and open(). There were 2,523,672 system calls after this patch (so a net decrease of ~950k is statistically significant). This change shows no performance change on my system. But I have a high-end system with a fast SSD. It is quite possible this change will have a significant impact on network file systems, where extra network round trips due to excessive I/O system calls could introduce significant latency.

changegroup: skip delta when the underlying revlog do not use them Revlog can now be configured to store full snapshot only. This is used on the changelog. However, the changegroup packing was still recomputing deltas to be sent over the wire. We now just reuse the full snapshot directly in this case, skipping delta computation. This provides use with a large speed up(-30%): # perfchangegroupchangelog on mercurial ! wall 2.010326 comb 2.020000 user 2.000000 sys 0.020000 (best of 5) ! wall 1.382039 comb 1.380000 user 1.370000 sys 0.010000 (best of 8) # perfchangegroupchangelog on pypy ! wall 5.792589 comb 5.780000 user 5.780000 sys 0.000000 (best of 3) ! wall 3.911158 comb 3.920000 user 3.900000 sys 0.020000 (best of 3) # perfchangegroupchangelog on mozilla central ! wall 20.683727 comb 20.680000 user 20.630000 sys 0.050000 (best of 3) ! wall 14.190204 comb 14.190000 user 14.150000 sys 0.040000 (best of 3) Many tests have to be updated because of the change in bundle content. All theses update have been verified. Because diffing changelog was not very valuable, the resulting bundle have similar size (often a bit smaller): # full bundle of mozilla central with delta: 1142740533B without delta: 1142173300B So this is a win all over the board.

revlog: make 'storedeltachains' a "public" attribute The next changeset will make that attribute read by the changegroup packer. We make it "public" beforehand.

manifest: don't store None in fulltextcache When we read a value from fulltextcache, we expect it to be an array, so we should not store None in it. Found while working on narrowhg.

copies: improve assertions during copy recombination - Make sure there is nothing to recombine in non-graftlike scenarios - More pythonic assert syntax

treemanifest: fix bad argument order to treemanifestctx Found by running tests with _treeinmem (both of them) modified to be True.

wireproto: compress data from a generator Currently, the "getbundle" wire protocol command obtains a generator of data, converts it to a util.chunkbuffer, then converts it back to a generator via the protocol's groupchunks() implementation. For the SSH protocol, groupchunks() simply reads 4kb chunks then write()s the data to a file descriptor. For the HTTP protocol, groupchunks() reads 32kb chunks, feeds those into a zlib compressor, emits compressed data as it is available, and that is sent to the WSGI layer, where it is likely turned into HTTP chunked transfer chunks as is or further buffered and turned into a larger chunk. For both the SSH and HTTP protocols, there is inefficiency from using util.chunkbuffer. For SSH, emitting consistent 4kb chunks sounds nice. However, the file descriptor it is writing to is almost certainly buffered. That means that a Python .write() probably doesn't translate into exactly what is written to the I/O layer. For HTTP, we're going through an intermediate layer to zlib compress data. So all util.chunkbuffer is doing is ensuring that the chunks we feed into the zlib compressor are of uniform size. This means more CPU time in Python buffering and emitting chunks in util.chunkbuffer but fewer function calls to zlib. This patch introduces and implements a new wire protocol abstract method: compresschunks(). It is like groupchunks() except it operates on a generator instead of something with a .read(). The SSH implementation simply proxies chunks. The HTTP implementation uses zlib compression. To avoid duplicate code, the HTTP groupchunks() has been reimplemented in terms of compresschunks(). To prove this all works, the "getbundle" wire protocol command has been switched to compresschunks(). This removes the util.chunkbuffer from that command. Now, data essentially streams straight from the changegroup emitter to the wire, possibly through a zlib compressor. Generators all the way, baby. There were slim to no performance changes on the server as measured with the mozilla-central repository. This is likely because CPU time is dominated by reading revlogs, producing the changegroup, and zlib compressing the output stream. Still, this brings us a little closer to our ideal of using generators everywhere.

revset: optimize for destination() being "inefficient" destination() will scan through the whole subset and read extras for each revision to get its source.

copies: make _checkcopies handle copy sequences spanning the TCA (issue4028) When working in a rotated DAG (for a graftlike merge), there can be files that are renamed both between the base and the topological CA, and between the TCA and the endpoint farther from the base. Such renames span the TCA (and thus need both passes of _checkcopies to be fully detected), but may not necessarily be divergent. Make _checkcopies return "incomplete copies" and "incomplete divergences" in this case, and let mergecopies recombine them once data from both passes of _checkcopies is available. With this patch, all known cases involving renames and grafts pass. (Developed together with Pierre-Yves David)

checkcopies: add logic to handle remotebase As the two _checkcopies passes' ranges are separated by tca, not base, only one of the two passes will actually encounter the base. Pass "remotebase" to the other pass to let it know not to expect passing over the base. This is required for handling a few unusual rename cases.