branchmap: use revbranchcache when updating branch map The revbranchcache is read on demand before it will be used for updating the branch map. It is written back when the branchmap is written and it will thus use the same locking as branchmap. The revbranchcache instance is short-lived; it is only stored in the branchmap from .update() is invoked and until .write() is invoked. Branchmap already assume that the repo is locked in that case. The use of revbranchcache for branch map updates will make sure that the revbranchcache "always" is kept up-to-date. The perfbranchmap benchmark is somewhat bogus, especially when we can see that the caching makes a significant difference between the realistic case of a first run and the rare case of rerunning it with a full cache. Here are some 'base' numbers on mozilla-central: Before: ! wall 6.912745 comb 6.910000 user 6.840000 sys 0.070000 (best of 3) After - initial, cache is empty: ! wall 7.792569 comb 7.790000 user 7.720000 sys 0.070000 (best of 3) After - cache is full: ! wall 0.879688 comb 0.880000 user 0.870000 sys 0.010000 (best of 4) The overhead when running with empty cache comes from checking, missing and updating it every time. Most of the performance improvement comes from not having to extract the branch info from the changelog. The last doubling of performance comes from no longer having to convert all branch names to local encoding but reuse the few already converted branch names. On the hg repo: Before: ! wall 0.715703 comb 0.710000 user 0.710000 sys 0.000000 (best of 14) After: ! wall 0.105489 comb 0.110000 user 0.110000 sys 0.000000 (best of 87)

branchcache: introduce revbranchcache for caching of revision branch names It is expensive to retrieve the branch name of a revision. Very expensive when creating a changectx and calling .branch() every time - slightly less when using changelog.branchinfo(). Now, to speed things up, provide a way to cache the results on disk in an efficient format. Each branchname is assigned a number, and for each revision we store the number of the corresponding branch name. The branch names are stored in a dedicated file which is strictly append only. Branch names are usually reused across several revisions, and the total list of branch names will thus be so small that it is feasible to read the whole set of names before using the cache. It will however do that it might be more efficient to use the changelog for retrieving the branch info for a single revision. The revision entries are stored in another file. This file is usually append only, but if the repository has been modified, the file will be truncated and the relevant parts rewritten on demand. The entries for each revision are 8 bytes each, and the whole revision file will thus be 1/8 of 00changelog.i. Each revision entry contains the first 4 bytes of the corresponding node hash. This is used as a check sum that always is verified before the entry is used. That check is relatively expensive but it makes sure history modification is detected and handled correctly. It will also detect and handle most revision file corruptions. This is just a cache. A new format can always be introduced if other requirements or ideas make that seem like a good idea. Rebuilding the cache is not really more expensive than it was to run for example 'hg log -b branchname' before this cache was introduced. This new method is still unused but promise to make some operations several times faster once it actually is used. Abandoning Python 2.4 would make it possible to implement this more efficiently by using struct classes and pack_into. The Python code could probably also be micro optimized or it could be implemented very efficiently in C where it would be easy to control the data access.

hgweb: move archive entries outside of <li> in monoblue style archiveentry already includes surrounding <li></li>, so putting archive entries inside <li> element produced incorrect markup.

hgweb: add searchhint to templates/coal/map coal style uses every template (except header.tmpl) directly from paper style, but doesn't use paper/map file. Elements defined in such map files are used in templates as you would expect. For example, paper/search.tmpl contains '{searchhint}' and template engine replaces that with the actual hint. But when coal style reuses paper/search.tmpl, it needs to define searchhint in its map file as well, or template engine will not find it. So let's copy it from paper/map to coal/map. Before this change, if the coal style was selected, the hint for the search field in page header was present, but it was completely empty. Although the absence of searchhint in coal/map produced no error.

largefiles: enable subrepo support for remove Previously, remove failed when operating on a largefile in a subrepo, stating that the file is untracked.

transplant: properly skip empty changeset (issue4423) If resolving a merge conflict result in an empty changesets, we now properly skip the changeset instead of crashing. Original patch from Robert Collins <robertc@robertcollins.net>.

color: add support for colorizing git subrepo diffs

tests: fix test-casefolding.t output This change started with a387b0390082.

synthrepo: new filenames must not also be new directories, and vice-versa When generating many new files into a set of many possible new directories, there is the possibility that the same path is chosen as both file and directory. How likely this is depends on the size of the dictionary used, the generated directory structure and the number of generated files.

status: don't override _buildstatus() in workingcommitctx Now that the caching into _status is done in workingctx._dirstatestatus(), which workingcommitctx._dirstatestatus() does not call, there is no caching to prevent in _buildstatus(), so stop overriding it.

status: cache dirstate status in _dirstatestatus() Since it's only the dirstate status we cache, it makes more sense to cache it in the _dirstatestatus() method. Note that this change means the dirstate status will also be cached when status is requested between the working copy and some other revision, while we currently only cache the result if exactly the status between the working copy and its parent is requested.

localrepo: add ignoremissing parameter to branchtip Previously, in the namespaces api, the only caller of branchtip was singlenode which happened to raise the same exception that branchtip raised: KeyError. This is a minor change but will allow upcoming patches to use repo.branchtip to not raise an exception if a branch doesn't exist. After that, it will be possible for extensions to use the namespace api in a stable way.

namespaces: add method to return a list of nodes for a given name This is a helpful method that some extensions can make use of (e.g. for custom revsets); currently not used in core.

namespaces: add test for log Now that we have enough features in the namespaces api, we add a test for it.

log: use new namespaces api to display names The only caveat here is that branches must be displayed first due to backwards compatibility. The order of namespaces is defined to be the 'update' order which, unfortunately, is not the same as log output order. It's worth mentioning that the log output is still translated the same as before since we are formating our strings the same way: # i18n: column positioning for "hg log" _("bookmark: %s\n") % bookmark becomes tname = _(("%s:" % ns.templatename).ljust(13) + "%s\n") % name when name == 'bookmark'. The ljust(13) keeps the strings and whitespace equal. Adding a new namespace is even easier now because the log output code doesn't need to change. A future programmer would just need to add the string to the corresponding .po file (which is the same as they would have had to do previously).

tests: add a i18n translation test for log output Upcoming patches will change the way that log output is generated so we add a test to ensure that the words 'branches', 'bookmarks', and 'tags' are still translated.

filectx: fix annotate to not directly instantiate filectx 28a302e9225d changed basefilectx.annotate() to directly instantiate new filectx's instead of going through self.filectx(), this breaks extensions that replace the filectx class, and would also break future uses that would need memfilectx's.

largefiles: don't print files as both large and normal in addremove dryruns

largefiles: return the list of added files from addlargefiles() This will be used to exclude largefile candidates from the normal file matcher, which will allow add and addremove dryruns to not print a file as both a normal and a large file.

largefiles: align the output messages for an added file with core methods Core addremove prints the file relative to cwd only if patterns are provided to the command. Core add always prints relative to cwd. Also, both methods print the subrepo prefix when needed. The 'already a largefile' doesn't have an analog in core, but follows the same rules for consistency.

largefiles: align the output messages for a removed file with core methods Both cmdutil.remove() and scmutil.addremove() require verbose mode or an inexact match to print the filename. Core addremove also prints the file relative to cwd only if patterns are provided to the command. And finally, both methods print the subrepo prefix when needed.

revset: use '%' as an operator for 'only' With this patch, we can make it much easier to specify 'only(A,B)' -> A%B. Similarly, 'only(A)' -> A%. On Windows, '%' is a semi-reserved symbol in the following way: using non-bash shells (e.g. cmd.exe but NOT PowerShell, ConEmu, and cmder), %var% is only expanded when 'var' exists and is surrounded by '%'. That only leaves batch scripts which could prove to be problematic. I posit that this isn't a big issue because any developer of batch scripts already knows that to use '%' one needs to escape it by using a double '%%'. Alternatives to '%' could be '=' but that might be limiting our future if we ever decide to use temporary assignments in a revset.

transaction: support for callbacks during abort Previous transaction work added callbacks to be called during regular transaction commit/close. As part of refactoring Mozilla's pushlog extension (an extension that opens a SQLite database and tries to tie its transaction semantics to Mercurial's transaction), I discovered that the new transaction APIs were insufficient to avoid monkeypatching transaction instance internals. Adding a callback that is called during transaction abort removes the necessity for monkeypatching and completes the API.

debugnamecomplete: use new name api Instead of hardcoding a list of places to check, we use the new repo.names api to get a list of potential names to complete.

debugnamecomplete: rename from debuglabelcomplete Now that we have decided on the use of 'name' instead of 'label' we rename this function accordingly. The old method 'debuglabelcomplete' has been left as a deprecated command so that current scripts don't break.

namespaces: add __iter__ and iteritems methods Iterating over all the namespaces is a common operation, naturally, so we add those methods now. Since we are using a sorted dictionary, this method just calls the underlying __iter__ or iteritems method.

namespaces: add 'listnames' property Currently, we have no way to list all the names in a given namespace. This is needed for things such as tab completion. Future patches will use this patch for exactly that purpose.

test-bundle2-exchange: create temp script in $TESTTMP, not $TESTDIR The bundle2-pushkey-hook.sh script is currently created in $TESTTMP, and leaves an untracked file in that directory (tests/) after running.

manifest: drop withflags() method, which is now unused

context: use new manifest.diff(clean=True) support This further simplifies the status code. This simplification comes at a slight performance cost for `hg export`. Before, on mozilla-central: perfmanifest tip ! wall 0.265977 comb 0.260000 user 0.240000 sys 0.020000 (best of 38) perftags ! result: 162 ! wall 0.007172 comb 0.010000 user 0.000000 sys 0.010000 (best of 403) perfstatus ! wall 0.422302 comb 0.420000 user 0.260000 sys 0.160000 (best of 24) hgperf export tip ! wall 0.148706 comb 0.150000 user 0.150000 sys 0.000000 (best of 65) after, same repo: perfmanifest tip ! wall 0.267143 comb 0.270000 user 0.250000 sys 0.020000 (best of 37) perftags ! result: 162 ! wall 0.006943 comb 0.010000 user 0.000000 sys 0.010000 (best of 397) perfstatus ! wall 0.411198 comb 0.410000 user 0.260000 sys 0.150000 (best of 24) hgperf export tip ! wall 0.173229 comb 0.170000 user 0.170000 sys 0.000000 (best of 55) The next set of patches introduces a new manifest type implemented almost entirely in C, and more than makes up for the performance hit incurred in this change.