namespaces: add __getitem__ property Since the namespaces object uses an underlying (sorted) dictionary to store the namespaces, it makes sense to expose this to naturally gain access to those namespaces.

merge with stable

cmdutil.jsonchangeset: properly compute added and removed files jsonchangeset._show() was computing the reverse status of the current changeset. As a result, added files were showing up as removed and removed files were showing up as adds. There were existing tests for this code and they were flat out wrong.

largefiles: convert addlargefiles() to vfs

rebase: clarify comment about merge ancestor when rebasing merges The code for picking a merge ancestor when rebasing merges had a long and incorrect comment. The comment would perhaps have been fine as commit message but does not make the code more readable or maintainable and is a bad substitute for correct and readable code. The correct essense of the comment is quite trivial: a merge of an ancestor of the rebase destination and an 'outside' revision can be rebased as if it was a linear change, using 'destination ancestor parent' as base and pretty much ignoring the 'outside' revision. The code path where the comment is placed is however also used for other kinds of merge rebases. The comment is thus not really correct and not helpful. I think it would be better to drop the comment and rewrite the code.

status: don't list files as both clean and deleted Tracked files that are deleted should always be reported as such, no matter what their state was in earlier revisions. This is encoded in in two conditions in the loop in basectx._buildstatus() for modified and added files, but the check is missing for clean files. We should check for clean files too, but instead of adding the check in a third place, move it earlier and skip most of the loop body for deleted files.

status: don't list files as both removed and deleted When calculating status involving the working copy and a revision other than the parent of the working copy, the files that are not in the working context manifest ('mf2' in the basectx._buildstatus()) will be reported as removed (note that deleted files _are_ in the working context manifest). However, if the file is reported as deleted in the dirstate, it will get that status too (as shown by failing tests). Fix by removing deleted files from the 'removed' list after the main loop in _buildstatus().

revset-filelog: handle hidden linkrev for file missing for head (issue4490) The fix for linkrev pointing to hidden revision was crashing when the file was missing from head's manifest. We now properly handle this case. (yes I feel silly)

run-tests: automatically add (glob) to "saved backup bundle to" lines Avoid spending too much time adding (glob) after running run-tests -i. This doesn't handle all cases but it helps. The run-tests tests add a bit of escaping of trailing (glob) in the output to avoid interference from the outer test runner. The regexp for matching the output lines contains a group for making multiline substitute in a way that works with Python before 2.7.

transaction: use the right location when cleaning up backup file (issue4479) The location variable fetch from the loop and the one used to actually fetch it mismatched. We fix the name to ensure file outside of store are cleaned up.

merge with stable

revset: delay showing parse error for the revset alias until it is referred Before this patch, a problematic revset alias aborts execution immediately, even if it isn't referred in the specified revset. If old "hg" may be used too (for example, bisecting Mercurial itself), it is also difficult to write alias definitions using features newly introduced by newer "hg" into configuration files, because such alias definitions cause unexpected abortion at parsing revset aliases with old "hg". This patch delays showing parse error for the revset alias until it is actually referred at runtime. This patch detects referring problematic aliases in "_expandaliases" by examination of "revsetalias.error", which is initialized with the error message only when parsing fails. For usability, this patch also warns about problematic aliases, even if they aren't referred at runtime. This should help users to know potential problems in their alias definitions earlier.

revset: drop pre-lazyset optimization for stringset of subset == entire repo It was introduced at e44ebd2a142a, where spanset.__contains__() did not exist. Nowadays, we have to pay huge penalty for len(subset). The following example showed that OR operation could be O(n * m^2) (n: len(repo), m: number of OR operators, m >= 2) probably because of filteredset.__len__. revset #0: 0|1|2|3|4|5|6|7|8|9 0) wall 8.092713 comb 8.090000 user 8.090000 sys 0.000000 (best of 3) 1) wall 0.445354 comb 0.450000 user 0.430000 sys 0.020000 (best of 22) 2) wall 0.000389 comb 0.000000 user 0.000000 sys 0.000000 (best of 7347) (0: 3.2.4, 1: 3.1.2, 2: this patch)

keyword: update copyright year

keyword: use vfs.reljoin and util.unlinkpath to remove kwdemo

largefiles: properly sync lfdirstate after removing largefiles The more aggressive synchronization of lfdirstate that was backed out in 1265a3a71d75 masked the problem where lfdirstate would hold an 'R' for a largefile that was added and then removed without a commit between. We could just conditionally call lfdirstate.drop() or lfdirstate.remove() here, but this also properly updates lfdirstate if the standin doesn't exist for the file somehow (i.e. call drop instead of remove). Without this change, the precommit status in the commit command immediately after the test change lists the removed (and never committed) largefile as 'R'. It can also lead to situations where the status command reports the same, long after the commit [1]. [1] http://www.selenic.com/pipermail/mercurial-devel/2015-January/065153.html

linkrev-filelog: handle filtered linkrev with no visible children (issue4307) If the file revision with a filtered linkrev does not have any (unfiltered) children, we cannot use it to bound the search for another introduction. Instead, we have to look at the file revision used by each head changeset. If one of them uses this file revision, we know there is another occurrence and we have a starting point. See inline comments for details. Adding some kind of permanent reference of all the introductions of a file revision instead of just the first one would be much better. But this is more difficult. I hope to take that into account in the next repository format.

linkrev: work around linkrev to filtered entry in 'filelog' revset This revset is used by 'hg log FILENAME'. This prevent bugs when used on a repository with hidden revisions. Instead of just discarding file revisions whose linkrevs point to filtered revisions, we put them aside and post-process them trying to find a non-filtered introduction. See inline documentation for details about how it works. This only fixes some of the problems. Once again, more will be needed when we can cannot rely on child revisions of a file to find linkrev-shadowned revisions. A test is added for 'hg log' catching such cases.

namespaces: update documentation and code indentation The previous patch changed just the functionality, while this patch focuses on the documentation and indentation to keep review simple.

namespaces: use namespace object instead of dictionary This isn't as bad as the diff seems, it only looks like scary. In this patch, we use the 'namespace' object instead of accessing keys in a dictionary. This required the 'templatename' and 'names' method to change their implementation. Later, we will remove these functions entirely due to a better api.

namespaces: copy implementation to new namespace object

namespaces: add a namespace object Currently, we use a dictionary object to store the namespace properties. This is python so let's use an object. This will allow us to be more flexible in our method signatures in the future.

localrepo: use vfs.reljoin rather than os.path.join in the localrepository class The removes the last remaining usage of os.path.join inside teh localrepository class.

largefiles: drop a redundant check for patterns when removing without --after This is in the way of passing a matcher to removelargefiles(). This method is called in exactly two places- first in overrides.addremove() (but only if the pattern list passed to it is not empty), and second in the commands.remove() override. But since the latter calls commands.remove() first, which also does this check, it isn't needed here.

context: override _dirstatestatus in workingcommitctx for correct matching Before this patch, the result of "status()" on "workingcommitctx" may incorrectly contain files other than ones to be committed, because "workingctx._dirstatestatus()" returns the result of "dirstate.status()" directly. For correct matching, this patch overrides "_dirstatestatus" in "workingcommitctx" and makes it return matched files only in "self._status". This patch uses empty list for "deleted", "unknown" and "ignored" of status, because status between "changectx"s also makes them empty.

context: avoid breaking already fixed self._status at ctx.status() Before this patch, "status()" on "workingcommitctx" with "always match" object causes breaking "self._status" in "workingctx._buildstatus()", because "workingctx._buildstatus()" caches the result of "dirstate.status()" into "self._status" for efficiency, even though it should be fixed at construction for committing. For example, template function "diff()" without any patterns in "committemplate" implies "status()" on "workingcommitctx" with "always match" object, via "basectx.diff()" and "patch.diff()". Then, broken "self._status" causes committing unexpected files. To avoid breaking already fixed "self._status" at "ctx.status()", this patch overrides "_buildstatus" in "workingcommitctx". This patch doesn't write out the result of template function "diff()" in "committemplate" in "test-commit.t", because matching against files to be committed still has an issue fixed in subsequent patch.

context: add workingcommitctx for exact context to be committed Before this patch, "workingctx" is also used for the context to be committed. But "workingctx" works incorrectly in some cases. For example, even when only some of changed files in the working directory are committed, "status()" on "workingctx" object for committing recognizes files not to be committed as changed, too. As the preparation for fixing these issues, this patch chooses adding new class "workingcommitctx" for exact context to be committed, because switching by the flag (like "self._fixedstatus" or so) in some code paths of "workingctx" is less readable and maintenancable.

context: make unknown/ignored/clean of cached status empty for equivalence Before this patch, "workingctx.status" caches the result of "dirstate.status" directly into "self._status". But "dirstate.status" is invoked with False "list*" arguments in normal "self._status" accessing route, and this makes "unknown"/"ignored"/"clean" of status empty. This may cause unexpected result of code paths internally accessing to them (accessors for external usage are already removed by previous patch). This patch makes "unknown"/"ignored"/"clean" of cached status empty for equivalence. Making them empty is executed only when at least one of "unknown", "ignored" or "clean" has files, for efficiency.

templatefilters.json: stabilize output The json filter was previously iterating over keys in an object in an undefined order. Let's throw a sorted() in there so output is consistent. It's somewhat frightening that there are no tests for the json filter. Subsequent commits will add them, so we pass on the opportunity to add them here.

templatefilters.json: call functions The "changeset" template from hgweb is using a lambda in the "diffsummary" key. In preparation for enabling JSON output from hgweb, teach the json filter how to call functions.