--- a/i18n/da.po Mon Oct 25 13:06:37 2010 -0500
+++ b/i18n/da.po Mon Oct 25 13:07:27 2010 -0500
@@ -17,8 +17,8 @@
msgstr ""
"Project-Id-Version: Mercurial\n"
"Report-Msgid-Bugs-To: <mercurial-devel@selenic.com>\n"
-"POT-Creation-Date: 2010-09-18 21:41+0200\n"
-"PO-Revision-Date: 2010-09-18 22:02+0200\n"
+"POT-Creation-Date: 2010-10-23 16:24+0200\n"
+"PO-Revision-Date: 2010-10-23 16:26+0200\n"
"Last-Translator: <mg@lazybytes.net>\n"
"Language-Team: Danish\n"
"Language: \n"
@@ -37,8 +37,16 @@
msgid "Commands"
msgstr "Kommandoer"
-msgid " options:"
-msgstr " tilvalg:"
+msgid "Extensions"
+msgstr "Udvidelser"
+
+msgid ""
+"This section contains help for extensions that are distributed together with "
+"Mercurial. Help for other extensions is available in the help system."
+msgstr ""
+
+msgid "options:"
+msgstr "tilvalg:"
#, python-format
msgid " aliases: %s"
@@ -83,7 +91,7 @@
msgid ""
"Branch-based Access Control\n"
-"---------------------------"
+"..........................."
msgstr ""
msgid ""
@@ -107,7 +115,7 @@
msgid ""
"Path-based Access Control\n"
-"-------------------------"
+"........................."
msgstr ""
msgid ""
@@ -119,7 +127,7 @@
msgid ""
"Groups\n"
-"------"
+"......"
msgstr ""
msgid ""
@@ -136,7 +144,7 @@
msgid ""
"Example Configuration\n"
-"---------------------"
+"....................."
msgstr ""
msgid "::"
@@ -327,7 +335,13 @@
" You can use :hg:`bookmark NAME` to set a bookmark on the working\n"
" directory's parent revision with the given name. If you specify\n"
" a revision using -r REV (where REV may be an existing bookmark),\n"
-" the bookmark is assigned to that revision.\n"
+" the bookmark is assigned to that revision."
+msgstr ""
+
+msgid ""
+" Bookmarks can be pushed and pulled between repositories (see :hg:`help\n"
+" push` and :hg:`help pull`). This requires the bookmark extension to be\n"
+" enabled for both the local and remote repositories.\n"
" "
msgstr ""
@@ -409,6 +423,22 @@
msgid "compare bookmark"
msgstr "sammenlign bogmærke"
+msgid "bookmark takes one or no arguments"
+msgstr "bookmark tager et eller to argumenter"
+
+msgid "the argument to bookmark must be a string"
+msgstr ""
+
+msgid ""
+"\n"
+"Added by the bookmarks extension:"
+msgstr ""
+
+msgid ""
+"``bookmark([name])``\n"
+" The named bookmark or all bookmarks.\n"
+msgstr ""
+
msgid "force"
msgstr "gennemtving"
@@ -998,6 +1028,8 @@
msgid "win32console not found, please install pywin32\n"
msgstr "win32console blev ikke fundet, installer venligst pywin32\n"
+#. i18n: 'always', 'auto', and 'never' are keywords and should
+#. not be translated
msgid "when to colorize (boolean, always, auto, or never)"
msgstr ""
"hvornår der skal farvelægges (boolks værdi, \"always\", \"auto\" eller "
@@ -1190,7 +1222,7 @@
msgid ""
" Mercurial Source\n"
-" ----------------"
+" ''''''''''''''''"
msgstr ""
msgid ""
@@ -1207,7 +1239,7 @@
msgid ""
" CVS Source\n"
-" ----------"
+" ''''''''''"
msgstr ""
msgid ""
@@ -1264,7 +1296,7 @@
msgid ""
" Subversion Source\n"
-" -----------------"
+" '''''''''''''''''"
msgstr ""
msgid ""
@@ -1302,7 +1334,7 @@
msgid ""
" Perforce Source\n"
-" ---------------"
+" '''''''''''''''"
msgstr ""
msgid ""
@@ -1326,7 +1358,7 @@
msgid ""
" Mercurial Destination\n"
-" ---------------------"
+" '''''''''''''''''''''"
msgstr ""
msgid ""
@@ -1665,6 +1697,13 @@
msgid "Python ElementTree module is not available"
msgstr "Python ElementTree modulet er ikke tilstede"
+#, python-format
+msgid "%s repository format is unsupported, please upgrade"
+msgstr ""
+
+msgid "failed to detect repository format!"
+msgstr ""
+
msgid "internal calling inconsistency"
msgstr "intern kaldeinkonsistens"
@@ -1982,7 +2021,7 @@
msgid ""
"- ``eol.native`` (default ``os.linesep``) can be set to ``LF`` or\n"
-" ``CRLF`` override the default interpretation of ``native`` for\n"
+" ``CRLF`` to override the default interpretation of ``native`` for\n"
" checkout. This can be used with :hg:`archive` on Unix, say, to\n"
" generate an archive where files have line endings for Windows."
msgstr ""
@@ -2205,12 +2244,14 @@
" order, use --switch-parent."
msgstr ""
-msgid ""
-" See :hg:`help dates` for a list of formats valid for -d/--date.\n"
+msgid " See :hg:`help dates` for a list of formats valid for -d/--date."
+msgstr ""
+" Se :hg:`help dates` for en liste af gyldige formater til -d/--date."
+
+msgid ""
+" Returns 0 on success.\n"
" "
msgstr ""
-" Se :hg:`help dates` for en liste af gyldige formater til -d/--date.\n"
-" "
msgid ""
"working dir not at branch tip (use \"hg update\" to check out branch tip)"
@@ -2321,6 +2362,13 @@
" Hvis der ikke angives en revision, så bruges forældren til\n"
" arbejdskataloget, eller tip, hvis der ikke er hentet en revision."
+msgid ""
+" See :hg:`help dates` for a list of formats valid for -d/--date.\n"
+" "
+msgstr ""
+" Se :hg:`help dates` for en liste af gyldige formater til -d/--date.\n"
+" "
+
msgid "uncommitted merge - please provide a specific revision"
msgstr "udeponeret sammenføjning - angiv venligst en specifik revision"
@@ -2876,8 +2924,9 @@
msgstr ""
msgid ""
-"NOTE: the more specific you are in your filename patterns the less you\n"
-"lose speed in huge repositories."
+".. note::\n"
+" The more specific you are in your filename patterns the less you\n"
+" lose speed in huge repositories."
msgstr ""
msgid ""
@@ -3537,6 +3586,9 @@
msgid "print the patches already applied"
msgstr "udskriver rettelserne som allerede er anvendt"
+msgid " Returns 0 on success."
+msgstr ""
+
msgid "only one patch applied\n"
msgstr "kun én rettelse er anvendt\n"
@@ -3607,10 +3659,15 @@
msgid " To import an existing patch while renaming it::"
msgstr ""
-msgid ""
-" hg qimport -e existing-patch -n new-name\n"
+msgid " hg qimport -e existing-patch -n new-name"
+msgstr ""
+
+msgid ""
+" Returns 0 if import succeeded.\n"
" "
msgstr ""
+" Returnerer 0 hvis importeringen lykkedes.\n"
+" "
msgid "init a new queue repository (DEPRECATED)"
msgstr "opret et nyt kø-depot (FORÆLDET)"
@@ -3653,9 +3710,15 @@
msgid ""
" The patch directory must be a nested Mercurial repository, as\n"
-" would be created by :hg:`init --mq`.\n"
+" would be created by :hg:`init --mq`."
+msgstr ""
+
+msgid ""
+" Return 0 on success.\n"
" "
msgstr ""
+" Returnerer 0 ved succes.\n"
+" "
msgid "versioned patch repository not found (see init --mq)"
msgstr "versionsstyret rettelsesdepot blev ikke fundet (se init --mq)"
@@ -3718,9 +3781,19 @@
" Use the -g/--git option to keep the patch in the git extended diff\n"
" format. Read the diffs help topic for more information on why this\n"
" is important for preserving permission changes and copy/rename\n"
-" information.\n"
+" information."
+msgstr ""
+" Brug -g/--git tilvalget for at generere ændringer i det udvidede\n"
+" git diff-format. Se :hg:`help diffs` for mere information om\n"
+" hvorfor dette er vigtigt for at bevare filrettigheder og\n"
+" information om kopieringer og omdøbninger."
+
+msgid ""
+" Returns 0 on successful creation of a new patch.\n"
" "
msgstr ""
+" Returnerer 0 hvis patchen blev oprettet.\n"
+" "
msgid "update the current patch"
msgstr "opdater den aktuelle patch"
@@ -3753,14 +3826,12 @@
" hg add/remove/copy/rename work as usual, though you might want to\n"
" use git-style patches (-g/--git or [diff] git=1) to track copies\n"
" and renames. See the diffs help topic for more information on the\n"
-" git diff format.\n"
-" "
+" git diff format."
msgstr ""
" hg add/remove/copy/rename virker som sædvanlig, dog vil du måske\n"
" bruge git-patches (-g/--git eller [diff] git=1) for at følge\n"
" kopier og omdøbninger. Se 'hg help diffs' for mere information om\n"
-" git diff formatet.\n"
-" "
+" git diff formatet."
msgid "option \"-e\" incompatible with \"-m\" or \"-l\""
msgstr "tilvalg \"-e\" er inkompatibelt med \"-m\" eller \"-l\""
@@ -3783,14 +3854,12 @@
" Use :hg:`diff` if you only want to see the changes made since the\n"
" last qrefresh, or :hg:`export qtip` if you want to see changes\n"
" made by the current patch without including changes made since the\n"
-" qrefresh.\n"
-" "
+" qrefresh."
msgstr ""
" Brug :hg:`diff` hvis du kun vil se ændringer lavet siden den\n"
" sidste qrefresh, eller :hg:`export qtip` hvis du vil se ændringer\n"
" lavet af den nuværende patch uden at inkludere ændringer lavet\n"
-" siden qrefresh.\n"
-" "
+" siden qrefresh."
msgid "fold the named patches into the current patch"
msgstr ""
@@ -3806,7 +3875,7 @@
msgid ""
" The header for each folded patch will be concatenated with the\n"
-" current patch header, separated by a line of '* * *'."
+" current patch header, separated by a line of ``* * *``."
msgstr ""
msgid "qfold requires at least one patch name"
@@ -3849,22 +3918,21 @@
msgid ""
" With no arguments, print the currently active guards.\n"
-" With arguments, set guards for the named patch.\n"
-" NOTE: Specifying negative guards now requires '--'."
-msgstr ""
-" Uden argumenter vises de nuværende aktive filtre.\n"
-" Med argumenter sættes filtre for den navngivne rettelse.\n"
-" BEMÆRK: negative filtre skal nu specificeres med '--'."
+" With arguments, set guards for the named patch."
+msgstr ""
+" Uden argumenter: vis de aktiverede filtre.\n"
+" Med argumenter: sæt filtre for den navngivne patch."
+
+msgid ""
+" .. note::\n"
+" Specifying negative guards now requires '--'."
+msgstr ""
msgid " To set guards on another patch::"
msgstr " For at sætte filtre på en anden rettelse::"
-msgid ""
-" hg qguard other.patch -- +2.6.17 -stable\n"
-" "
-msgstr ""
-" hg qguard other.patch -- +2.6.17 -stable\n"
-" "
+msgid " hg qguard other.patch -- +2.6.17 -stable"
+msgstr " hg qguard other.patch -- +2.6.17 -stable"
msgid "cannot mix -l/--list with options or arguments"
msgstr "kan ikke blande -l/--list med tilvalg eller argumenter"
@@ -3884,11 +3952,16 @@
msgid ""
" When -f/--force is applied, all local changes in patched files\n"
-" will be lost.\n"
-" "
+" will be lost."
msgstr ""
" Når -f/--force er angivet, så vil alle lokale ændringer i de\n"
-" rettede filer gå tabt.\n"
+" rettede filer gå tabt."
+
+msgid ""
+" Return 0 on succces.\n"
+" "
+msgstr ""
+" Returnerer 0 ved succes.\n"
" "
msgid "no saved queues found, please use -n\n"
@@ -3904,13 +3977,11 @@
msgid ""
" By default, pops off the top of the patch stack. If given a patch\n"
" name, keeps popping off patches until the named patch is at the\n"
-" top of the stack.\n"
-" "
+" top of the stack."
msgstr ""
" Som standard fjernes toppen af stakken. Hvis der angives en\n"
" rettelse, så vil der blive fjernet rettelser indtil den angivne\n"
-" rettelse er på toppen af stakken.\n"
-" "
+" rettelse er på toppen af stakken."
#, python-format
msgid "using patch queue: %s\n"
@@ -3937,8 +4008,8 @@
msgid "restore the queue state saved by a revision (DEPRECATED)"
msgstr ""
-msgid " This command is deprecated, use rebase --mq instead."
-msgstr ""
+msgid " This command is deprecated, use :hg:`rebase` instead."
+msgstr " Denne kommando er forældet. Brug :hg:`rebase` i stedet."
msgid "save current queue state (DEPRECATED)"
msgstr ""
@@ -3985,8 +4056,10 @@
msgid ""
" Use the --no-backup option to discard the backup bundle once the\n"
-" operation completes.\n"
-" "
+" operation completes."
+msgstr ""
+
+msgid "empty revision set"
msgstr ""
msgid "set or print guarded patches to push"
@@ -4115,8 +4188,7 @@
msgid ""
" This can be especially useful if your changes have been applied to\n"
" an upstream repository, or if you are about to push your changes\n"
-" to upstream.\n"
-" "
+" to upstream."
msgstr ""
msgid "no revisions specified"
@@ -4148,8 +4220,7 @@
msgid ""
" To delete an existing queue, use --delete. You cannot delete the "
"currently\n"
-" active queue.\n"
-" "
+" active queue."
msgstr ""
msgid "patches applied - cannot set new queue active"
@@ -4261,8 +4332,8 @@
msgid "stop managing a revision (DEPRECATED)"
msgstr ""
-msgid "hg qdelete [-k] [-r REV]... [PATCH]..."
-msgstr "hg qdelete [-k] [-r REV]... [RETTELSE]..."
+msgid "hg qdelete [-k] [PATCH]..."
+msgstr "hg qdelete [-k] [RETTELSE]..."
msgid "edit patch header"
msgstr "rediger rettelsens hoved"
@@ -4354,11 +4425,11 @@
msgid "forget any local changes to patched files"
msgstr "glem eventuelle lokale ændringer i de rettede filer"
-msgid "hg qpop [-a] [-n NAME] [-f] [PATCH | INDEX]"
-msgstr "hg qpop [-a] [-n NAVN] [-f] [RETTELSE | INDEKS]"
-
-msgid "apply if the patch has rejects"
-msgstr ""
+msgid "hg qpop [-a] [-f] [PATCH | INDEX]"
+msgstr "hg qpop [-a] [-f] [RETTELSE | INDEKS]"
+
+msgid "apply on top of local changes"
+msgstr "anvend ovenpå lokale ændringer"
msgid "list patch name in commit text"
msgstr ""
@@ -4375,8 +4446,8 @@
msgid "reorder patch series and apply only the patch"
msgstr ""
-msgid "hg qpush [-f] [-l] [-a] [-m] [-n NAME] [--move] [PATCH | INDEX]"
-msgstr "hg qpush [-f] [-l] [-a] [-m] [-n NAVN] [--move] [RETTELSE | INDEKS]"
+msgid "hg qpush [-f] [-l] [-a] [--move] [PATCH | INDEX]"
+msgstr "hg qpush [-f] [-l] [-a] [--move] [RETTELSE | INDEKS]"
msgid "refresh only files already in the patch and specified files"
msgstr "genopfrisk kun filer som allerede findes i rettelsen og angivne filer"
@@ -4460,8 +4531,11 @@
msgid "no backups (DEPRECATED)"
msgstr "ingen backupper (FORÆLDET)"
-msgid "hg strip [-f] [-n] REV..."
-msgstr "hg strip [-f] [-n] REV..."
+msgid "do not modify working copy during strip"
+msgstr ""
+
+msgid "hg strip [-k] [-f] [-n] REV..."
+msgstr "hg strip [-k] [-f] [-n] REV..."
msgid "hg qtop [-s]"
msgstr "hg qtop [-s]"
@@ -4632,6 +4706,18 @@
msgstr ""
msgid ""
+"By default, the pager is only executed if a command has output. To\n"
+"force the pager to run even if a command prints nothing, set::"
+msgstr ""
+
+msgid ""
+" [pager]\n"
+" force = True"
+msgstr ""
+" [pager]\n"
+" force = True"
+
+msgid ""
"If you notice \"BROKEN PIPE\" error messages, you can disable them by\n"
"setting::"
msgstr ""
@@ -4675,8 +4761,19 @@
msgid ""
"To ignore global commands like :hg:`version` or :hg:`help`, you have\n"
-"to specify them in your user configuration file.\n"
-msgstr ""
+"to specify them in your user configuration file."
+msgstr ""
+
+msgid ""
+"The --pager=... option can also be used to control when the pager is\n"
+"used. Use a boolean value like yes, no, on, off, or use auto for\n"
+"normal behavior.\n"
+msgstr ""
+
+msgid "when to paginate (boolean, always, auto, or never)"
+msgstr ""
+"hvornår der skal farvelægges (boolks værdi, \"always\", \"auto\" eller "
+"\"never\")"
msgid "interpret suffixes to refer to ancestor revisions"
msgstr "fortolk suffikser for at referere til forfader-revisioner"
@@ -4742,12 +4839,6 @@
msgstr ""
msgid ""
-"With the -d/--diffstat or -c/--confirm options, you will be presented\n"
-"with a final summary of all messages and asked for confirmation before\n"
-"the messages are sent."
-msgstr ""
-
-msgid ""
"To configure other defaults, add a section like this to your hgrc\n"
"file::"
msgstr ""
@@ -4772,39 +4863,6 @@
msgstr ""
msgid ""
-"To avoid sending patches prematurely, it is a good idea to first run\n"
-"the :hg:`email` command with the \"-n\" option (test only). You will be\n"
-"prompted for an email recipient address, a subject and an introductory\n"
-"message describing the patches of your patchbomb. Then when all is\n"
-"done, patchbomb messages are displayed. If the PAGER environment\n"
-"variable is set, your pager will be fired up once for each patchbomb\n"
-"message, so you can verify everything is alright."
-msgstr ""
-
-msgid ""
-"The -m/--mbox option is also very useful. Instead of previewing each\n"
-"patchbomb message in a pager or sending the messages directly, it will\n"
-"create a UNIX mailbox file with the patch emails. This mailbox file\n"
-"can be previewed with any mail user agent which supports UNIX mbox\n"
-"files, e.g. with mutt::"
-msgstr ""
-
-msgid " % mutt -R -f mbox"
-msgstr ""
-
-msgid ""
-"When you are previewing the patchbomb messages, you can use ``formail``\n"
-"(a utility that is commonly installed as part of the procmail\n"
-"package), to send each message out::"
-msgstr ""
-
-msgid " % formail -s sendmail -bm -t < mbox"
-msgstr " % formail -s sendmail -bm -t < mbox"
-
-msgid "That should be all. Now your patchbomb is on its way out."
-msgstr ""
-
-msgid ""
"You can also either configure the method option in the email section\n"
"to be a sendmail compatible mailer or fill out the [smtp] section so\n"
"that the patchbomb extension can automatically send patchbombs\n"
@@ -4832,10 +4890,21 @@
" Each patch email has a Subject line of \"[PATCH M of N] ...\", using\n"
" the first line of the changeset description as the subject text.\n"
" The message contains two or three parts. First, the changeset\n"
-" description. Next, (optionally) if the diffstat program is\n"
-" installed and -d/--diffstat is used, the result of running\n"
-" diffstat on the patch. Finally, the patch itself, as generated by\n"
-" :hg:`export`."
+" description."
+msgstr ""
+
+msgid ""
+" With the -d/--diffstat option, if the diffstat program is\n"
+" installed, the result of running diffstat on the patch is inserted."
+msgstr ""
+
+msgid " Finally, the patch itself, as generated by :hg:`export`."
+msgstr ""
+
+msgid ""
+" With the -d/--diffstat or -c/--confirm options, you will be presented\n"
+" with a final summary of all messages and asked for confirmation before\n"
+" the messages are sent."
msgstr ""
msgid ""
@@ -4858,6 +4927,23 @@
msgstr ""
msgid ""
+" With -m/--mbox, instead of previewing each patchbomb message in a\n"
+" pager or sending the messages directly, it will create a UNIX\n"
+" mailbox file with the patch emails. This mailbox file can be\n"
+" previewed with any mail user agent which supports UNIX mbox\n"
+" files."
+msgstr ""
+
+msgid ""
+" With -n/--test, all steps will run, but mail will not be sent.\n"
+" You will be prompted for an email recipient address, a subject and\n"
+" an introductory message describing the patches of your patchbomb.\n"
+" Then when all is done, patchbomb messages are displayed. If the\n"
+" PAGER environment variable is set, your pager will be fired up once\n"
+" for each patchbomb message, so you can verify everything is alright."
+msgstr ""
+
+msgid ""
" hg email -r 3000 # send patch 3000 only\n"
" hg email -r 3000 -r 3001 # send patches 3000 and 3001\n"
" hg email -r 3000:3005 # send patches 3000 through 3005\n"
@@ -4880,6 +4966,15 @@
msgstr ""
msgid ""
+" hg email -o -m mbox && # generate an mbox file...\n"
+" mutt -R -f mbox # ... and view it with mutt\n"
+" hg email -o -m mbox && # generate an mbox file ...\n"
+" formail -s sendmail \\ # ... and use formail to send from the "
+"mbox\n"
+" -bm -t < mbox # ... using sendmail"
+msgstr ""
+
+msgid ""
" Before using this command, you will need to enable email in your\n"
" hgrc. See the [email] section in hgrc(5) for details.\n"
" "
@@ -5237,8 +5332,8 @@
msgid "rebasing"
msgstr ""
-msgid " changesets"
-msgstr " ændringer"
+msgid "changesets"
+msgstr "ændringer"
msgid "fix unresolved conflicts with hg resolve then run hg rebase --continue"
msgstr "ret uløste konflikter med hg resolve og kør så hg rebase --continue"
@@ -5392,10 +5487,6 @@
" Hvis en liste af filer er udeladt, så vil alle ændringer\n"
" rapporteret af :hg:`status` være kandidater til at blive optaget."
-msgid " See :hg:`help dates` for a list of formats valid for -d/--date."
-msgstr ""
-" Se :hg:`help dates` for en liste af gyldige formater til -d/--date."
-
msgid ""
" You will be prompted for whether to record changes to each\n"
" modified file, and for files with multiple changes, for each\n"
@@ -5447,9 +5538,6 @@
msgid "no changes to record\n"
msgstr "ingen ændringer at optage\n"
-msgid "patch failed to apply"
-msgstr "rettelse kunne ikke tilføjes"
-
msgid "hg record [OPTION]... [FILE]..."
msgstr "hg record [TILVALG]... [FIL]..."
@@ -5525,9 +5613,6 @@
msgid "not linkable: %s\n"
msgstr "kan ikke sammenkædes: %s\n"
-msgid " files"
-msgstr " filer"
-
msgid "pruning"
msgstr "beskærer"
@@ -5621,15 +5706,16 @@
msgstr ""
msgid ""
-" NOTE: using rollback or extensions that destroy/modify history\n"
-" (mq, rebase, etc.) can cause considerable confusion with shared\n"
-" clones. In particular, if two shared clones are both updated to\n"
-" the same changeset, and one of them destroys that changeset with\n"
-" rollback, the other clone will suddenly stop working: all\n"
-" operations will fail with \"abort: working directory has unknown\n"
-" parent\". The only known workaround is to use debugsetparents on\n"
-" the broken clone to reset it to a changeset that still exists\n"
-" (e.g. tip).\n"
+" .. note::\n"
+" using rollback or extensions that destroy/modify history (mq,\n"
+" rebase, etc.) can cause considerable confusion with shared\n"
+" clones. In particular, if two shared clones are both updated to\n"
+" the same changeset, and one of them destroys that changeset\n"
+" with rollback, the other clone will suddenly stop working: all\n"
+" operations will fail with \"abort: working directory has unknown\n"
+" parent\". The only known workaround is to use debugsetparents on\n"
+" the broken clone to reset it to a changeset that still exists\n"
+" (e.g. tip).\n"
" "
msgstr ""
@@ -5786,6 +5872,19 @@
msgid "outstanding local changes"
msgstr "udestående lokale ændringer"
+msgid ""
+"\n"
+"Added by the transplant extension:"
+msgstr ""
+
+msgid ""
+"``transplanted(set)``\n"
+" Transplanted changesets in set.\n"
+msgstr ""
+
+msgid "Specifying Revision Sets"
+msgstr "Angivning af af mængder af revisioner"
+
msgid "pull patches from REPO"
msgstr "hiv rettelser fra DEPOT"
@@ -6080,9 +6179,6 @@
msgid "limit must be positive"
msgstr "grænsen skal være positiv"
-msgid "too many revisions specified"
-msgstr "der er specificeret for mange revisioner"
-
#, python-format
msgid "invalid format spec '%%%s' in output filename"
msgstr "ugyldig formatspecifikation '%%%s' i output filnavn"
@@ -6408,11 +6504,6 @@
" annotering alligevel, selvom resultatet sandsynligvis vil være\n"
" hverken brugbart eller ønskværdigt."
-msgid ""
-" Returns 0 on success.\n"
-" "
-msgstr ""
-
msgid "at least one filename or pattern is required"
msgstr "kræver mindst et filnavn eller mønster"
@@ -6473,33 +6564,38 @@
msgstr "omgør effekten af tidligere ændringer"
msgid ""
-" Commit the backed out changes as a new changeset. The new\n"
-" changeset is a child of the backed out changeset."
-msgstr ""
-" Deponerer de omgjorte ændringer som en ny ændring. Den nye ændring\n"
-" er et barn af den omgjorte ændring."
-
-msgid ""
-" If you backout a changeset other than the tip, a new head is\n"
-" created. This head will be the new tip and you should merge this\n"
-" backout changeset with another head."
-msgstr ""
-" Hvis du omgør en ændring som ikke er spidsen, så vil et der blive\n"
-" lavet et nyt hoved. Dette hoved vil være den nye spids og du bør\n"
-" sammenføje denne omgjorte ændring med et andet hoved (det\n"
-" nuværende hoved som standard)."
-
-msgid ""
+" The backout command merges the reverse effect of the reverted\n"
+" changeset into the working directory."
+msgstr ""
+
+msgid ""
+" With the --merge option, it first commits the reverted changes\n"
+" as a new changeset. This new changeset is a child of the reverted\n"
+" changeset.\n"
" The --merge option remembers the parent of the working directory\n"
" before starting the backout, then merges the new head with that\n"
-" changeset afterwards. This saves you from doing the merge by hand.\n"
-" The result of this merge is not committed, as with a normal merge."
-msgstr ""
-" Med --merge tilvalget vil forælderen til arbejdskataloget blive\n"
-" husket og det nye hoved vil blive sammenføjet med denne ændring\n"
-" bagefter. Dette sparer dig for at lave sammenføjningen selv.\n"
-" Resultatet af denne sammenføjning er ikke lagt i depot, som ved en\n"
-" normal sammenføjning."
+" changeset afterwards.\n"
+" This will result in an explicit merge in the history."
+msgstr ""
+" Med --merge tilvalget bliver de omgjorte ændringer først deponeret\n"
+" som en ny ændring. Denne nye ændring vil være et barn af den\n"
+" omgjorte ændring. Derefter bliver det nye hoved sammenføjet med\n"
+" arbejdskatalogets forælderrevision. Derved skabes der en eksplicit\n"
+" sammenføjning i historien."
+
+msgid ""
+" If you backout a changeset other than the original parent of the\n"
+" working directory, the result of this merge is not committed,\n"
+" as with a normal merge. Otherwise, no merge is needed and the\n"
+" commit is automatic."
+msgstr ""
+
+msgid ""
+" Note that the default behavior (without --merge) has changed in\n"
+" version 1.7. To restore the previous default behavior, use\n"
+" :hg:`backout --merge` and then :hg:`update --clean .` to get rid of\n"
+" the ongoing merge."
+msgstr ""
msgid "please specify just one revision"
msgstr "angiv venligst kun en revision"
@@ -6531,12 +6627,6 @@
msgid "merging with changeset %s\n"
msgstr "sammenføjer med ændring %s\n"
-msgid "the backout changeset is a new head - do not forget to merge\n"
-msgstr ""
-
-msgid "(use \"backout --merge\" if you want to auto-merge)\n"
-msgstr "(brug \"backout --merge\" hvis du vil sammenføje automatisk)\n"
-
msgid "subdivision search of changesets"
msgstr ""
@@ -7283,14 +7373,15 @@
msgstr " Ændringerne mellem filerne vises i unified diff-formatet."
msgid ""
-" NOTE: diff may generate unexpected results for merges, as it will\n"
-" default to comparing against the working directory's first parent\n"
-" changeset if no revisions are specified."
-msgstr ""
-" BEMÆRK: diff kan generere overraskende resultater for\n"
-" sammenføjninger, idet den som udgangspunkt vil sammenligne med\n"
-" arbejdskatalogets første forælder, hvis der ikke angivet en\n"
-" revision."
+" .. note::\n"
+" diff may generate unexpected results for merges, as it will\n"
+" default to comparing against the working directory's first\n"
+" parent changeset if no revisions are specified."
+msgstr ""
+" .. note::\n"
+" diff kan generere overraskende resultater for sammenføjninger,\n"
+" idet den som udgangspunkt vil sammenligne med arbejdskatalogets\n"
+" første forælder, hvis der ikke angivet en revision."
msgid ""
" Alternatively you can specify -c/--change with a revision to see\n"
@@ -7333,13 +7424,15 @@
" og deponeringsbeskeden."
msgid ""
-" NOTE: export may generate unexpected diff output for merge\n"
-" changesets, as it will compare the merge changeset against its\n"
-" first parent only."
-msgstr ""
-" BEMÆRK: export kan generere uventet diff uddata for\n"
-" sammenføjningsændringer idet den kun vil sammenligne\n"
-" sammenføjningsændringen med dennes første forælder."
+" .. note::\n"
+" export may generate unexpected diff output for merge\n"
+" changesets, as it will compare the merge changeset against its\n"
+" first parent only."
+msgstr ""
+" .. note::\n"
+" export kan generere uventet diff uddata for\n"
+" sammenføjningsændringer idet den kun vil sammenligne\n"
+" sammenføjningsændringen med dennes første forælder."
msgid ""
" Output may be to a file, in which case the name of the file is\n"
@@ -7814,13 +7907,13 @@
" følger kun den første forældre for sammenføjningsrevisioner."
msgid ""
-" If no revision range is specified, the default is tip:0 unless\n"
+" If no revision range is specified, the default is ``tip:0`` unless\n"
" --follow is set, in which case the working directory parent is\n"
" used as the starting revision. You can specify a revision set for\n"
" log, see :hg:`help revsets` for more information."
msgstr ""
-" Hvis der ikke angives et revisionsinterval, da bruges tip:0 som\n"
-" standard, med mindre --follow er brugt, i hvilket tilfælde\n"
+" Hvis der ikke angives et revisionsinterval, da bruges ``tip:0``\n"
+" som standard, med mindre --follow er brugt, i hvilket tilfælde\n"
" arbejdskatalogets forælder bruges som startrevision. Du kan\n"
" specificere en mængde af ændringer til log, se :hg:`help revsets`\n"
" for mere information."
@@ -7837,15 +7930,17 @@
" listen af ændrede filer og den fulde deponeringsbesked."
msgid ""
-" NOTE: log -p/--patch may generate unexpected diff output for merge\n"
-" changesets, as it will only compare the merge changeset against\n"
-" its first parent. Also, only files different from BOTH parents\n"
-" will appear in files:."
-msgstr ""
-" BEMÆRK: log -p/--patch kan generere uventet diff output for\n"
-" sammenføjningsændringer idet den kun sammenligner ændringen med\n"
-" dennes første forælder. Ydermere vises kun filer som er\n"
-" forskellige fra BEGGE forældre i files:."
+" .. note::\n"
+" log -p/--patch may generate unexpected diff output for merge\n"
+" changesets, as it will only compare the merge changeset against\n"
+" its first parent. Also, only files different from BOTH parents\n"
+" will appear in files:."
+msgstr ""
+" .. note::\n"
+" log -p/--patch kan generere uventet diff output for\n"
+" sammenføjningsændringer idet den kun sammenligner ændringen med\n"
+" dennes første forælder. Ydermere vises kun filer som er\n"
+" forskellige fra BEGGE forældre i files:."
msgid "output the current or given revision of the project manifest"
msgstr ""
@@ -7883,6 +7978,12 @@
" næste deponerede ændring får to forældre."
msgid ""
+" ``--tool`` can be used to specify the merge tool used for file\n"
+" merges. It overrides the HGMERGE environment variable and your\n"
+" configuration files."
+msgstr ""
+
+msgid ""
" If no revision is specified, the working directory's parent is a\n"
" head revision, and the current branch contains exactly one other\n"
" head, the other head is merged with by default. Otherwise, an\n"
@@ -7893,6 +7994,10 @@
" hoved, så sammenføjes der med dette hoved som standard. Ellers\n"
" skal en eksplicit revision angives."
+msgid " :hg:`resolve` must be used to resolve unresolved files."
+msgstr ""
+" :hg:`resolve` skal bruges for at prøve at sammenføje uløste filer igen"
+
msgid ""
" To undo an uncommitted merge, use :hg:`update --clean .` which\n"
" will check out a clean copy of the original merge parent, losing\n"
@@ -8249,10 +8354,13 @@
msgstr ""
msgid ""
-" - :hg:`resolve FILE...`: attempt to re-merge the specified files,\n"
-" discarding any previous merge attempts. Re-merging is not\n"
+" - :hg:`resolve [--tool TOOL] FILE...`: attempt to re-merge the "
+"specified\n"
+" files, discarding any previous merge attempts. Re-merging is not\n"
" performed for files already marked as resolved. Use ``--all/-a``\n"
-" to selects all unresolved files."
+" to selects all unresolved files. ``--tool`` can be used to specify\n"
+" the merge tool used for the given files. It overrides the HGMERGE\n"
+" environment variable and your configuration files."
msgstr ""
msgid ""
@@ -8297,13 +8405,13 @@
msgstr ""
msgid ""
-" NOTE: This command is most likely not what you are looking for. revert\n"
-" will partially overwrite content in the working directory without "
-"changing\n"
-" the working directory parents. Use :hg:`update -r rev` to check out "
-"earlier\n"
-" revisions, or :hg:`update --clean .` to undo a merge which has added\n"
-" another parent."
+" .. note::\n"
+" This command is most likely not what you are looking for.\n"
+" Revert will partially overwrite content in the working\n"
+" directory without changing the working directory parents. Use\n"
+" :hg:`update -r rev` to check out earlier revisions, or\n"
+" :hg:`update --clean .` to undo a merge which has added another\n"
+" parent."
msgstr ""
msgid ""
@@ -8493,16 +8601,18 @@
" -u/--unknown eller -i/--ignored."
msgid ""
-" NOTE: status may appear to disagree with diff if permissions have\n"
-" changed or a merge has occurred. The standard diff format does not\n"
-" report permission changes and diff only reports changes relative\n"
-" to one merge parent."
-msgstr ""
-" BEMÆRK: status kan tilsyneladende være forskellig fra diff hvis\n"
-" rettigheder er blevet ændret eller hvis en sammenføjning har\n"
-" fundet sted. Det normale diff-format rapporterer ikke ændringer i\n"
-" rettigheder og diff rapporterer kun ænringer relativt til en\n"
-" sammenføjningsforældre."
+" .. note::\n"
+" status may appear to disagree with diff if permissions have\n"
+" changed or a merge has occurred. The standard diff format does\n"
+" not report permission changes and diff only reports changes\n"
+" relative to one merge parent."
+msgstr ""
+" .. note::\n"
+" status kan tilsyneladende være forskellig fra diff hvis\n"
+" rettigheder er blevet ændret eller hvis en sammenføjning har\n"
+" fundet sted. Det normale diff-format rapporterer ikke ændringer\n"
+" i rettigheder og diff rapporterer kun ænringer relativt til en\n"
+" sammenføjningsforældre."
msgid ""
" If one revision is given, it is used as the base revision.\n"
@@ -8747,18 +8857,20 @@
msgid ""
" Update the repository's working directory to the specified\n"
+" changeset. If no changeset is specified, update to the tip of the\n"
+" current named branch."
+msgstr ""
+" Opdater depotets arbejdskatalog til den angivne ændring. Hvis der\n"
+" ikke angives en ændring, da opdateres til spidsen af den nuværende\n"
+" gren."
+
+msgid ""
+" If the changeset is not a descendant of the working directory's\n"
+" parent, the update is aborted. With the -c/--check option, the\n"
+" working directory is checked for uncommitted changes; if none are\n"
+" found, the working directory is updated to the specified\n"
" changeset."
-msgstr " Opdater depotets arbejdskatalog til den angivne ændring."
-
-msgid ""
-" If no changeset is specified, attempt to update to the tip of the\n"
-" current branch. If this changeset is a descendant of the working\n"
-" directory's parent, update to it, otherwise abort."
-msgstr ""
-" Hvis der ikke er angivet nogen ændring, forsøg da at opdatere til\n"
-" spidsen af den nuværende gren. Hvis denne ændring nedstammer fra\n"
-" arbejdskatalogets forælder, da opdateres der til det, ellers\n"
-" afbrydes der."
+msgstr ""
msgid ""
" The following rules apply when the working directory contains\n"
@@ -8808,8 +8920,8 @@
" :hg:`clone -U`)."
msgid ""
-" If you want to update just one file to an older changeset, use :hg:"
-"`revert`."
+" If you want to update just one file to an older changeset, use\n"
+" :hg:`revert`."
msgstr ""
" Hvis du vil opdatere blot en enkelt fil til en ældre revision,\n"
" brug da :hg:`revert`."
@@ -9048,6 +9160,9 @@
msgid "parent to choose when backing out merge"
msgstr ""
+msgid "specify merge tool"
+msgstr "angiv sammenføjningsværktøj"
+
msgid "revision to backout"
msgstr "revision som skal bakkes ud"
@@ -9273,8 +9388,11 @@
msgid "[OPTION]... PATTERN [FILE]..."
msgstr "[TILVALG]... MØNSTER [FIL]..."
-msgid "show only heads which are descendants of REV"
-msgstr "vis kun hoveder som er efterkommere af REV"
+msgid "show only heads which are descendants of STARTREV"
+msgstr "vis kun hoveder som er efterkommere af STARTREV"
+
+msgid "STARTREV"
+msgstr "STARTREV"
msgid "show topological heads only"
msgstr ""
@@ -9285,8 +9403,8 @@
msgid "show normal and closed branch heads"
msgstr "vis normale og lukkede grenhoveder"
-msgid "[-ac] [-r REV] [REV]..."
-msgstr "[-ac] [-r REV] [REV]..."
+msgid "[-ac] [-r STARTREV] [REV]..."
+msgstr "[-ac] [-r STARTREV] [REV]..."
msgid "[TOPIC]"
msgstr "[EMNE]"
@@ -9521,8 +9639,8 @@
msgid "name to show in web pages (default: working directory)"
msgstr "navn der skal vises på websider (standard: arbejdskatalog)"
-msgid "name of the hgweb config file (serve more than one repository)"
-msgstr "navn på hgweb konfigurationsfil (serve mere end et depot)"
+msgid "name of the hgweb config file (see \"hg help hgweb\")"
+msgstr "navn på hgweb konfigurationsfil (se \"hg help hgweb\")"
msgid "name of the hgweb config file (DEPRECATED)"
msgstr "navn på hgweb konfigurationsfilen (FORÆLDET)"
@@ -9614,8 +9732,8 @@
msgid "discard uncommitted changes (no backup)"
msgstr "kasser ikke-deponerede ændringer (ingen sikkerhedskopi)"
-msgid "check for uncommitted changes"
-msgstr "kontroller for udeponerede ændringer"
+msgid "update across branches if no uncommitted changes"
+msgstr "opdater på tværs af grene hvis der er ingen udeponerede ændringer"
msgid "[-c] [-C] [-d DATE] [[-r] REV]"
msgstr "[-c] [-C] [-d DATO] [[-r] REV]"
@@ -9777,6 +9895,10 @@
msgstr "afbrudt: %s\n"
#, python-format
+msgid "(%s)\n"
+msgstr "(%s)\n"
+
+#, python-format
msgid "hg: parse error at %s: %s\n"
msgstr "hg: konfigurationsfejl på %s: %s\n"
@@ -9837,10 +9959,6 @@
msgid "hg: unknown command '%s'\n"
msgstr "hg: ukendt kommando '%s'\n"
-#, python-format
-msgid "(%s)\n"
-msgstr ""
-
msgid "(did you forget to compile extensions?)\n"
msgstr "(glemte du at kompilere udvidelserne?)\n"
@@ -10050,12 +10168,12 @@
msgid "Specifying Multiple Revisions"
msgstr "Angivning af flere revisioner"
-msgid "Specifying Revision Sets"
-msgstr "Angivning af af mængder af revisioner"
-
msgid "Diff Formats"
msgstr ""
+msgid "Merge Tools"
+msgstr ""
+
msgid "Template Usage"
msgstr "Brug af skabeloner"
@@ -11087,6 +11205,187 @@
"``bar`` and ``quux/baz`` respectively.\n"
msgstr ""
+msgid "To merge files Mercurial uses merge tools."
+msgstr ""
+
+msgid ""
+"A merge tool combines two different versions of a file into a merged\n"
+"file. Merge tools are given the two files and the greatest common\n"
+"ancestor of the two file versions, so they can determine the changes\n"
+"made on both branches."
+msgstr ""
+
+msgid ""
+"Merge tools are used both for :hg:`resolve`, :hg:`merge`, :hg:`update`,\n"
+":hg:`backout` and in several extensions."
+msgstr ""
+
+msgid ""
+"Usually, the merge tool tries to automatically reconcile the files by\n"
+"combining all non-overlapping changes that occurred separately in\n"
+"the two different evolutions of the same initial base file. Furthermore, "
+"some\n"
+"interactive merge programs make it easier to manually resolve\n"
+"conflicting merges, either in a graphical way, or by inserting some\n"
+"conflict markers. Mercurial does not include any interactive merge\n"
+"programs but relies on external tools for that."
+msgstr ""
+
+msgid ""
+"Available merge tools\n"
+"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\""
+msgstr ""
+
+msgid ""
+"External merge tools and their properties and usage is configured in the\n"
+"merge-tools configuration section - see hgrc(5) - but they can often also "
+"just\n"
+"be named by their executable."
+msgstr ""
+
+msgid ""
+"A merge tool is generally usable if its executable can be found on the\n"
+"system and if it can handle the merge. The executable can be found on the\n"
+"system if it either is an absolute or relative executable path or the name "
+"of\n"
+"an application in the executable search path. The tool is assumed to be "
+"able\n"
+"to handle the merge if it can handle symlinks if the file is a symlink, if "
+"it\n"
+"can handle binary files if the file is binary, and if a GUI is available if "
+"the\n"
+"tool requires a GUI."
+msgstr ""
+
+msgid ""
+"There are a some internal merge tools which can be used. The internal\n"
+"merge tools are:"
+msgstr ""
+
+msgid ""
+"``internal:merge``\n"
+" Uses the internal non-interactive simple merge algorithm for merging "
+"files.\n"
+" It will fail if there are any conflicts."
+msgstr ""
+
+msgid ""
+"``internal:fail``\n"
+" Rather than attempting to merge files that were modified on both\n"
+" branches, it marks these files as unresolved. Then the resolve\n"
+" command must be used to mark files resolved."
+msgstr ""
+
+msgid ""
+"``internal:local``\n"
+" Uses the local version of files as the merged version."
+msgstr ""
+
+msgid ""
+"``internal:other``\n"
+" Uses the other version of files as the merged version."
+msgstr ""
+
+msgid ""
+"``internal:prompt``\n"
+" Asks the user which of the local or the other version to keep as\n"
+" the merged version."
+msgstr ""
+
+msgid ""
+"``internal:dump``\n"
+" Creates three versions of the files to merge, containing the\n"
+" contents of local, other and base. These files can then be used to\n"
+" perform a merge manually. If the file to be merged is named\n"
+" ``a.txt``, these files will accordingly be named ``a.txt.local``,\n"
+" ``a.txt.other`` and ``a.txt.base`` and they will be placed in the\n"
+" same directory as ``a.txt``."
+msgstr ""
+
+msgid ""
+"Internal tools are always available and do not require a GUI but will by "
+"default\n"
+"not handle symlinks or binary files."
+msgstr ""
+
+msgid ""
+"Choosing a merge tool\n"
+"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\"\""
+msgstr ""
+
+msgid "Mercurial uses these rules when decing which merge tool to use:"
+msgstr ""
+
+msgid ""
+"0. If a tool has been specified with the --tool option to merge or resolve, "
+"it\n"
+" is used. If it is the name of a tool in the merge-tools configuration, "
+"its\n"
+" configuration is used. Otherwise the specified tool must be executable "
+"by\n"
+" the shell."
+msgstr ""
+
+msgid ""
+"1. If the ``HGMERGE`` environment variable is present, its value is used "
+"and\n"
+" must be executable by the shell."
+msgstr ""
+
+msgid ""
+"2. If the filename of the file to be merged matches any of the patterns in "
+"the\n"
+" merge-patterns configuration section, the first usable merge tool\n"
+" corresponding to a matching pattern is used. Here, binary capabilities of "
+"the\n"
+" merge tool are not considered."
+msgstr ""
+
+msgid ""
+"3. If ui.merge is set it will be considered next. If the value is not the "
+"name\n"
+" of a configured tool, the specified value is used and must be executable "
+"by\n"
+" the shell. Otherwise the named tool is used if it is usable."
+msgstr ""
+
+msgid ""
+"4. If any usable merge tools are present in the merge-tools configuration\n"
+" section, the one with the higest priority is used."
+msgstr ""
+
+msgid ""
+"5. If a program named ``hgmerge`` can be found on the system, it is used - "
+"but\n"
+" it will by default not be used for symlinks and binary files."
+msgstr ""
+
+msgid ""
+"6. If the file to be merged is not binary and is not a symlink, then\n"
+" ``internal:merge`` is used."
+msgstr ""
+
+msgid "7. The merge of the file fails and must be resolved before commit."
+msgstr ""
+
+msgid ""
+".. note::\n"
+" After selecting a merge program, Mercurial will by default attempt\n"
+" to merge the files using a simple merge algorithm first. Only if it "
+"doesn't\n"
+" succeed because of conflicting changes Mercurial will actually execute "
+"the\n"
+" merge program. Whether to use the simple merge algorithm first can be\n"
+" controlled by the premerge setting of the merge tool. Premerge is enabled "
+"by\n"
+" default unless the file is binary or a symlink."
+msgstr ""
+
+msgid ""
+"See the merge-tools and ui sections of hgrc(5) for details on the\n"
+"configuration of merge tools.\n"
+msgstr ""
+
msgid ""
"When Mercurial accepts more than one revision, they may be specified\n"
"individually, or provided as a topologically continuous range,\n"
@@ -11243,8 +11542,13 @@
"Identifiers such as branch names must be quoted with single or double\n"
"quotes if they contain characters outside of\n"
"``[._a-zA-Z0-9\\x80-\\xff]`` or if they match one of the predefined\n"
-"predicates. Special characters can be used in quoted identifiers by\n"
-"escaping them, e.g., ``\\n`` is interpreted as a newline."
+"predicates."
+msgstr ""
+
+msgid ""
+"Special characters can be used in quoted identifiers by escaping them,\n"
+"e.g., ``\\n`` is interpreted as a newline. To prevent them from being\n"
+"interpreted, strings can be prefixed with ``r``, e.g. ``r'...'``."
msgstr ""
msgid "There is a single prefix operator:"
@@ -11362,12 +11666,13 @@
msgid ""
"``grep(regex)``\n"
-" Like ``keyword(string)`` but accepts a regex."
+" Like ``keyword(string)`` but accepts a regex. Use ``grep(r'...')``\n"
+" to ensure special escape characters are handled correctly."
msgstr ""
msgid ""
"``head()``\n"
-" Changeset is a head."
+" Changeset is a named branch head."
msgstr ""
msgid ""
@@ -11376,6 +11681,11 @@
msgstr ""
msgid ""
+"``id(string)``\n"
+" Revision non-ambiguously specified by the given hex string prefix"
+msgstr ""
+
+msgid ""
"``keyword(string)``\n"
" Search commit message, user name, and names of changed files for\n"
" string."
@@ -11439,6 +11749,11 @@
msgstr ""
msgid ""
+"``rev(number)``\n"
+" Revision with the given numeric identifier."
+msgstr ""
+
+msgid ""
"``reverse(set)``\n"
" Reverse order of set."
msgstr ""
@@ -11466,8 +11781,8 @@
msgstr ""
msgid ""
-"``tagged()``\n"
-" Changeset is tagged."
+"``tag(name)``\n"
+" The specified tag by name, or all tagged revisions if no name is given."
msgstr ""
msgid ""
@@ -11497,21 +11812,50 @@
" -P x -> !::x\n"
" -l x -> limit(expr, x)"
-msgid "Some sample queries::"
-msgstr ""
-
-msgid ""
-" hg log -r 'branch(default)'\n"
-" hg log -r 'branch(default) and 1.5:: and not merge()'\n"
-" hg log -r '1.3::1.5 and keyword(bug) and file(\"hgext/*\")'\n"
-" hg log -r 'sort(date(\"May 2008\"), user)'\n"
-" hg log -r '(keyword(bug) or keyword(issue)) and not ancestors(tagged())'\n"
-msgstr ""
-" hg log -r 'branch(default)'\n"
-" hg log -r 'branch(default) and 1.5:: and not merge()'\n"
-" hg log -r '1.3::1.5 and keyword(bug) and file(\"hgext/*\")'\n"
-" hg log -r 'sort(date(\"May 2008\"), user)'\n"
-" hg log -r '(keyword(bug) or keyword(issue)) and not ancestors(tagged())'\n"
+msgid "Some sample queries:"
+msgstr ""
+
+msgid "- Changesets on the default branch::"
+msgstr "- Ændringer på default grenen::"
+
+msgid " hg log -r \"branch(default)\""
+msgstr " hg log -r \"branch(default)\""
+
+msgid "- Changesets on the default branch since tag 1.5 (excluding merges)::"
+msgstr ""
+
+msgid " hg log -r \"branch(default) and 1.5:: and not merge()\""
+msgstr " hg log -r \"branch(default) and 1.5:: and not merge()\""
+
+msgid "- Open branch heads::"
+msgstr "- Åbne grenhoveder::"
+
+msgid " hg log -r \"head() and not closed()\""
+msgstr " hg log -r \"head() and not closed()\""
+
+msgid ""
+"- Changesets between tags 1.3 and 1.5 mentioning \"bug\" that affect\n"
+" ``hgext/*``::"
+msgstr ""
+
+msgid " hg log -r \"1.3::1.5 and keyword(bug) and file('hgext/*')\""
+msgstr " hg log -r \"1.3::1.5 and keyword(bug) and file(\"hgext/*\")\""
+
+msgid "- Changesets in committed May 2008, sorted by user::"
+msgstr ""
+
+msgid " hg log -r \"sort(date('May 2008'), user)\""
+msgstr " hg log -r \"sort(date(\"May 2008\"), user)\""
+
+msgid ""
+"- Changesets mentioning \"bug\" or \"issue\" that are not in a tagged\n"
+" release::"
+msgstr ""
+
+msgid ""
+" hg log -r \"(keyword(bug) or keyword(issue)) and not ancestors(tagged"
+"())\"\n"
+msgstr " hg log -r \"(keyword(bug) or keyword(issue)) and not ancestors(tagged())\"\n"
msgid ""
"Mercurial allows you to customize output of commands through\n"
@@ -11684,6 +12028,11 @@
" and \">\" with XML entities."
msgstr ""
+msgid ""
+":hex: Any text. Convert a binary Mercurial node identifier into\n"
+" its long hexadecimal representation."
+msgstr ""
+
msgid ":fill68: Any text. Wraps the text to fit in 68 columns."
msgstr ""
@@ -11796,6 +12145,11 @@
"server."
msgstr ""
+msgid ""
+"Note that the security of HTTPS URLs depends on proper configuration of\n"
+"web.cacerts."
+msgstr ""
+
msgid "Some notes about using SSH with Mercurial:"
msgstr ""
@@ -12199,9 +12553,6 @@
msgid "adding changesets\n"
msgstr "tilføjer ændringer\n"
-msgid "changesets"
-msgstr "ændringer"
-
msgid "received changelog group is empty"
msgstr "modtagen changelog-gruppe er tom"
@@ -12372,7 +12723,7 @@
msgstr "henter %s til %s\n"
#, python-format
-msgid "warning: detected divergent renames of %s to:\n"
+msgid "note: possible conflict - %s was renamed multiple times to:\n"
msgstr ""
#, python-format
@@ -12389,15 +12740,42 @@
msgstr ""
"udestående ikke-deponerede ændringer (brug 'hg status' for at se ændringer)"
-msgid ""
-"crosses branches (use 'hg merge' to merge or use 'hg update -C' to discard "
-"changes)"
-msgstr ""
-"krydser grene (brug 'hg merge' for at sammenføje eller 'hg update -C' for at "
-"kassere ændringerne)"
-
-msgid "crosses branches (use 'hg merge' or use 'hg update -c')"
-msgstr "krydser grene (brug 'hg merge' eller 'hg update -c')"
+msgid "crosses branches (merge branches or use --clean to discard changes)"
+msgstr ""
+"krydser grene (sammenføj grenene eller brug --clean for at kassere "
+"ændringerne)"
+
+msgid "crosses branches (merge branches or use --check to force update)"
+msgstr ""
+"krydser grene (sammenføj grenene eller brug --check for at forcere "
+"opdateringen)"
+
+msgid "Attention:"
+msgstr ""
+
+msgid "Caution:"
+msgstr "Forsigtig:"
+
+msgid "!Danger!"
+msgstr "!Fare!"
+
+msgid "Error:"
+msgstr "Fejl:"
+
+msgid "Hint:"
+msgstr ""
+
+msgid "Important:"
+msgstr "Vigtigt:"
+
+msgid "Note:"
+msgstr "Bemærk:"
+
+msgid "Tip:"
+msgstr "Tip:"
+
+msgid "Warning!"
+msgstr "Advarsel!"
#, python-format
msgid "cannot create %s: destination already exists"
@@ -12477,14 +12855,8 @@
msgid "unsupported line endings type: %s"
msgstr "linieendelse %s understøttes ikke"
-msgid ""
-"internal patcher failed\n"
-"please report details to http://mercurial.selenic.com/bts/\n"
-"or mercurial@selenic.com\n"
-msgstr ""
-"intern lappe-funktionalitet fejlede\n"
-"angiv venligst fejldetaljer på http://mercurial.selenic.com/bts/\n"
-"eller mercurial@selenic.com\n"
+msgid "patch failed to apply"
+msgstr "rettelse kunne ikke tilføjes"
#, python-format
msgid " %d files changed, %d insertions(+), %d deletions(-)\n"
@@ -12557,12 +12929,12 @@
msgid "%s not found in the transaction"
msgstr "%s ikke fundet i transaktionen"
+msgid "consistency error in delta"
+msgstr "konsistensfejl i delta"
+
msgid "unknown base"
msgstr ""
-msgid "consistency error adding group"
-msgstr "konsistensfejl ved tilføjelse af gruppe"
-
msgid "unterminated string"
msgstr ""
@@ -12583,16 +12955,31 @@
msgid "not a function: %s"
msgstr "ikke en funktion: %s"
-msgid "limit wants two arguments"
-msgstr ""
-
-msgid "limit wants a number"
-msgstr ""
+msgid "id requires one argument"
+msgstr "id kræver et argument"
+
+msgid "id requires a string"
+msgstr ""
+
+msgid "rev requires one argument"
+msgstr ""
+
+msgid "rev requires a number"
+msgstr ""
+
+msgid "rev expects a number"
+msgstr "rev forventer et revisionsnummer"
+
+msgid "limit requires two arguments"
+msgstr "limit kræver to argumenter"
+
+msgid "limit requires a number"
+msgstr "limit kræver et tal"
msgid "limit expects a number"
msgstr ""
-msgid "ancestor wants two arguments"
+msgid "ancestor requires two arguments"
msgstr ""
msgid "ancestor arguments must be single revisions"
@@ -12601,31 +12988,35 @@
msgid "follow takes no arguments"
msgstr ""
-msgid "date wants a string"
-msgstr ""
-
-msgid "keyword wants a string"
-msgstr ""
-
-msgid "grep wants a string"
-msgstr ""
-
-msgid "author wants a string"
-msgstr ""
-
-msgid "file wants a pattern"
-msgstr ""
-
-msgid "contains wants a pattern"
-msgstr ""
-
-msgid "modifies wants a pattern"
-msgstr ""
-
-msgid "adds wants a pattern"
-msgstr ""
-
-msgid "removes wants a pattern"
+msgid "date requires a string"
+msgstr ""
+
+msgid "keyword requires a string"
+msgstr ""
+
+msgid "grep requires a string"
+msgstr ""
+
+#, python-format
+msgid "invalid match pattern: %s"
+msgstr "ugyldigt søgemønster: %s"
+
+msgid "author requires a string"
+msgstr ""
+
+msgid "file requires a pattern"
+msgstr ""
+
+msgid "contains requires a pattern"
+msgstr ""
+
+msgid "modifies requires a pattern"
+msgstr ""
+
+msgid "adds requires a pattern"
+msgstr ""
+
+msgid "removes requires a pattern"
msgstr ""
msgid "merge takes no arguments"
@@ -12637,7 +13028,7 @@
msgid "head takes no arguments"
msgstr ""
-msgid "sort wants one or two arguments"
+msgid "sort requires one or two arguments"
msgstr ""
msgid "sort spec must be a string"
@@ -12650,10 +13041,13 @@
msgid "all takes no arguments"
msgstr ""
-msgid "outgoing wants a repository path"
-msgstr ""
-
-msgid "tagged takes no arguments"
+msgid "outgoing requires a repository path"
+msgstr ""
+
+msgid "tag takes one or no arguments"
+msgstr ""
+
+msgid "the argument to tag must be a string"
msgstr ""
msgid "can't negate that"
@@ -12748,12 +13142,16 @@
msgstr ""
#, python-format
+msgid "default path for subrepository %s not found"
+msgstr ""
+
+#, python-format
msgid "unknown subrepo type %s"
msgstr "ukendt underdepottype %s"
#, python-format
-msgid "warning: %s in %s\n"
-msgstr "advarsel: %s i %s\n"
+msgid "warning: error \"%s\" in subrepository \"%s\"\n"
+msgstr "advarsel: fejl \"%s\" i underdepot \"%s\"\n"
#, python-format
msgid "removing subrepo %s\n"
@@ -12785,6 +13183,9 @@
msgid "node '%s' is not well formed"
msgstr "knude '%s' er ikke korrekt formet"
+msgid ".hg/tags.cache is corrupt, rebuilding it\n"
+msgstr ""
+
msgid "unmatched quotes"
msgstr ""
@@ -12829,6 +13230,10 @@
msgstr "Ignoreret: %s\n"
#, python-format
+msgid "(deprecated '%%' in path %s=%s from %s)\n"
+msgstr ""
+
+#, python-format
msgid "ignoring untrusted configuration option %s.%s = %s\n"
msgstr ""
@@ -12850,10 +13255,6 @@
msgid "username %s contains a newline\n"
msgstr "brugernavn %s indeholder et linieskift\n"
-#, python-format
-msgid "(deprecated '%%' in path %s=%s from %s)\n"
-msgstr ""
-
msgid "response expected"
msgstr "svar forventet"
@@ -12894,7 +13295,18 @@
msgid "certificate checking requires Python 2.6"
msgstr ""
-msgid "server identity verification succeeded\n"
+msgid "no certificate received"
+msgstr "modtog ikke noget certifikat"
+
+#, python-format
+msgid "certificate is for %s"
+msgstr "certifikatet er for %s"
+
+msgid "no commonName found in certificate"
+msgstr ""
+
+#, python-format
+msgid "%s certificate error: %s"
msgstr ""
#, python-format
@@ -13044,6 +13456,9 @@
msgid "checking changesets\n"
msgstr "kontrollerer ændringer\n"
+msgid "checking"
+msgstr "kontrollerer"
+
#, python-format
msgid "unpacking changeset %s"
msgstr "udpakker ændring %s"
@@ -13085,9 +13500,6 @@
msgid "cannot decode filename '%s'"
msgstr "kan ikke dekode filnavn '%s'"
-msgid "checking"
-msgstr "kontrollerer"
-
#, python-format
msgid "broken revlog! (%s)"
msgstr "beskadiget revlog! (%s)"
--- a/i18n/sv.po Mon Oct 25 13:06:37 2010 -0500
+++ b/i18n/sv.po Mon Oct 25 13:07:27 2010 -0500
@@ -13,8 +13,8 @@
msgstr ""
"Project-Id-Version: Mercurial\n"
"Report-Msgid-Bugs-To: <mercurial-devel@selenic.com>\n"
-"POT-Creation-Date: 2010-08-01 22:36+0200\n"
-"PO-Revision-Date: 2010-08-01 22:42+0200\n"
+"POT-Creation-Date: 2010-10-21 15:40+0200\n"
+"PO-Revision-Date: 2010-10-21 16:56+0200\n"
"Last-Translator: Jens Bäckman <jens.backman@gmail.com>\n"
"Language-Team: Swedish\n"
"Language: Swedish\n"
@@ -32,8 +32,18 @@
msgid "Commands"
msgstr "Kommandon"
-msgid " options:"
-msgstr " flaggor:"
+msgid "Extensions"
+msgstr "Utökningar"
+
+msgid ""
+"This section contains help for extensions that is distributed together with "
+"Mercurial. Help for other extensions is available in the help system."
+msgstr ""
+"Den här sektioner innehåller hjälp för utökningar som levereras med "
+"Mercurial. Hjälp för andra utälningar är tillgängliga i hjälpsystemet."
+
+msgid "options:"
+msgstr "flaggor:"
#, python-format
msgid " aliases: %s"
@@ -78,8 +88,10 @@
msgid ""
"Branch-based Access Control\n"
-"---------------------------"
-msgstr ""
+"..........................."
+msgstr ""
+"Grenbaserad Åtkomstkontroll\n"
+"..........................."
msgid ""
"Use the ``acl.deny.branches`` and ``acl.allow.branches`` sections to\n"
@@ -102,8 +114,10 @@
msgid ""
"Path-based Access Control\n"
-"-------------------------"
-msgstr ""
+"........................."
+msgstr ""
+"Sökvägsbaserad Åtkomstkontroll\n"
+".............................."
msgid ""
"Use the ``acl.deny`` and ``acl.allow`` sections to have path-based\n"
@@ -114,8 +128,10 @@
msgid ""
"Groups\n"
-"------"
-msgstr ""
+"......"
+msgstr ""
+"Grupper\n"
+"......."
msgid ""
"Group names must be prefixed with an ``@`` symbol. Specifying a group\n"
@@ -131,8 +147,10 @@
msgid ""
"Example Configuration\n"
-"---------------------"
-msgstr ""
+"....................."
+msgstr ""
+"Exempelkonfiguration\n"
+"...................."
msgid "::"
msgstr "::"
@@ -293,7 +311,7 @@
"By default, when several bookmarks point to the same changeset, they\n"
"will all move forward together. It is possible to obtain a more\n"
"git-like experience by adding the following configuration option to\n"
-"your .hgrc::"
+"your configuration file::"
msgstr ""
msgid ""
@@ -318,7 +336,13 @@
" You can use :hg:`bookmark NAME` to set a bookmark on the working\n"
" directory's parent revision with the given name. If you specify\n"
" a revision using -r REV (where REV may be an existing bookmark),\n"
-" the bookmark is assigned to that revision.\n"
+" the bookmark is assigned to that revision."
+msgstr ""
+
+msgid ""
+" Bookmarks can be pushed and pulled between repositories (see :hg:`help\n"
+" push` and :hg:`help pull`). This requires the bookmark extension to be\n"
+" enabled for both the local and remote repositories.\n"
" "
msgstr ""
@@ -374,6 +398,10 @@
msgid "deleting remote bookmark %s\n"
msgstr "raderar fjärrbokmärket %s\n"
+#, python-format
+msgid "bookmark %s does not exist on the local or remote repository!\n"
+msgstr "bokmärket %s existerar inte i lokal- eller fjärrarkiv!\n"
+
msgid "searching for changes\n"
msgstr "söker efter ändringar\n"
@@ -387,12 +415,35 @@
msgid "bookmark to import"
msgstr "bokmärke att importera"
+msgid "BOOKMARK"
+msgstr "BOKMÄRKE"
+
msgid "bookmark to export"
msgstr "bokmärke att exportera"
msgid "compare bookmark"
msgstr "jämför bokmärke"
+msgid "bookmark takes one or no arguments"
+msgstr "bookmark tar ett eller inga argument"
+
+msgid "the argument to bookmark must be a string"
+msgstr "argumentet till bookmark måste vara en sträng"
+
+msgid ""
+"\n"
+"Added by the bookmarks extension:"
+msgstr ""
+"\n"
+"Tillagda av bookmarks-utökningen:"
+
+msgid ""
+"``bookmark([name])``\n"
+" The named bookmark or all bookmarks.\n"
+msgstr ""
+"``bookmark([namn])``\n"
+" Det angivna bokmärket eller alla bokmärken.\n"
+
msgid "force"
msgstr "tvinga"
@@ -768,6 +819,10 @@
" "
msgstr ""
+#, python-format
+msgid "skipping malformed alias: %s\n"
+msgstr "hoppar över defekt alias: %s\n"
+
msgid "count rate for the specified revision or range"
msgstr ""
@@ -835,8 +890,8 @@
"(aka ANSI escape-koder). Denna modul tillhandahåller också funktionen\n"
"render_text, som kan användas för att lägga till effekter på valfri text."
-msgid "Default effects may be overridden from the .hgrc file::"
-msgstr "Standardeffekter kan ersättas från .hgrc-filen::"
+msgid "Default effects may be overridden from your configuration file::"
+msgstr "Standardeffekter kan ersättas från din konfiturationsfil::"
msgid ""
" [color]\n"
@@ -905,6 +960,17 @@
msgstr " bookmarks.current = green"
msgid ""
+" branches.active = none\n"
+" branches.closed = black bold\n"
+" branches.current = green\n"
+" branches.inactive = none"
+msgstr ""
+" branches.active = none\n"
+" branches.closed = black bold\n"
+" branches.current = green\n"
+" branches.inactive = none"
+
+msgid ""
"The color extension will try to detect whether to use ANSI codes or\n"
"Win32 console APIs, unless it is made explicit::"
msgstr ""
@@ -928,8 +994,8 @@
msgid "win32console not found, please install pywin32\n"
msgstr "win32console hittades inte, installera pywin32\n"
-msgid "when to colorize (always, auto, or never)"
-msgstr "när färgläggning ska ske (always, auto eller never)"
+msgid "when to colorize (boolean, always, auto, or never)"
+msgstr "när färgläggning ska ske (boolean, always, auto eller never)"
msgid "TYPE"
msgstr "TYP"
@@ -971,9 +1037,12 @@
msgid ""
" If no destination directory name is specified, it defaults to the\n"
-" basename of the source with '-hg' appended. If the destination\n"
+" basename of the source with ``-hg`` appended. If the destination\n"
" repository doesn't exist, it will be created."
msgstr ""
+" Om ingen destinationskatalog anges, kommer basnamnet för källan med\n"
+" ``-hg`` tillagd. Om destinationsarkivet inte existerar, så kommer det\n"
+" att skapas."
msgid ""
" By default, all sources except Mercurial will use --branchsort.\n"
@@ -1011,16 +1080,21 @@
msgid ""
" If the file doesn't exist, it's automatically created. It's\n"
-" updated on each commit copied, so convert-repo can be interrupted\n"
+" updated on each commit copied, so :hg:`convert` can be interrupted\n"
" and can be run repeatedly to copy new commits."
msgstr ""
msgid ""
-" The [username mapping] file is a simple text file that maps each\n"
-" source commit author to a destination commit author. It is handy\n"
-" for source SCMs that use unix logins to identify authors (eg:\n"
-" CVS). One line per author mapping and the line format is:\n"
-" srcauthor=whatever string you want"
+" The authormap is a simple text file that maps each source commit\n"
+" author to a destination commit author. It is handy for source SCMs\n"
+" that use unix logins to identify authors (eg: CVS). One line per\n"
+" author mapping and the line format is::"
+msgstr ""
+
+msgid " source author = destination author"
+msgstr ""
+
+msgid " Empty lines and lines starting with a ``#`` are ignored."
msgstr ""
msgid ""
@@ -1039,20 +1113,20 @@
msgstr " rename sökväg/till/källa sökväg/till/destination"
msgid ""
-" Comment lines start with '#'. A specificed path matches if it\n"
+" Comment lines start with ``#``. A specified path matches if it\n"
" equals the full relative name of a file or one of its parent\n"
-" directories. The 'include' or 'exclude' directive with the longest\n"
-" matching path applies, so line order does not matter."
-msgstr ""
-
-msgid ""
-" The 'include' directive causes a file, or all files under a\n"
+" directories. The ``include`` or ``exclude`` directive with the\n"
+" longest matching path applies, so line order does not matter."
+msgstr ""
+
+msgid ""
+" The ``include`` directive causes a file, or all files under a\n"
" directory, to be included in the destination repository, and the\n"
" exclusion of all other files and directories not explicitly\n"
-" included. The 'exclude' directive causes files or directories to\n"
-" be omitted. The 'rename' directive renames a file or directory if\n"
-" is converted. To rename from a subdirectory into the root of the\n"
-" repository, use '.' as the path to rename to."
+" included. The ``exclude`` directive causes files or directories to\n"
+" be omitted. The ``rename`` directive renames a file or directory if\n"
+" it is converted. To rename from a subdirectory into the root of\n"
+" the repository, use ``.`` as the path to rename to."
msgstr ""
msgid ""
@@ -1061,7 +1135,14 @@
" useful if you want to e.g. give a Subversion merge two parents, or\n"
" graft two disconnected series of history together. Each entry\n"
" contains a key, followed by a space, followed by one or two\n"
-" comma-separated values. The key is the revision ID in the source\n"
+" comma-separated values::"
+msgstr ""
+
+msgid " key parent1, parent2"
+msgstr ""
+
+msgid ""
+" The key is the revision ID in the source\n"
" revision control system whose parents should be modified (same\n"
" format as a key in .hg/shamap). The values are the revision IDs\n"
" (in either the source or destination revision control system) that\n"
@@ -1077,17 +1158,26 @@
" conjunction with a splicemap, it allows for a powerful combination\n"
" to help fix even the most badly mismanaged repositories and turn them\n"
" into nicely structured Mercurial repositories. The branchmap contains\n"
-" lines of the form \"original_branch_name new_branch_name\".\n"
-" \"original_branch_name\" is the name of the branch in the source\n"
-" repository, and \"new_branch_name\" is the name of the branch is the\n"
-" destination repository. This can be used to (for instance) move code\n"
-" in one repository from \"default\" to a named branch."
+" lines of the form::"
+msgstr ""
+
+msgid " original_branch_name new_branch_name"
+msgstr ""
+
+msgid ""
+" where \"original_branch_name\" is the name of the branch in the\n"
+" source repository, and \"new_branch_name\" is the name of the branch\n"
+" is the destination repository. No whitespace is allowed in the\n"
+" branch names. This can be used to (for instance) move code in one\n"
+" repository from \"default\" to a named branch."
msgstr ""
msgid ""
" Mercurial Source\n"
-" ----------------"
-msgstr ""
+" ''''''''''''''''"
+msgstr ""
+" Mercurial-källa\n"
+" '''''''''''''''"
msgid ""
" --config convert.hg.ignoreerrors=False (boolean)\n"
@@ -1103,8 +1193,10 @@
msgid ""
" CVS Source\n"
-" ----------"
-msgstr ""
+" ''''''''''"
+msgstr ""
+" CVS-källa\n"
+" '''''''''"
msgid ""
" CVS source will use a sandbox (i.e. a checked-out copy) from CVS\n"
@@ -1160,8 +1252,10 @@
msgid ""
" Subversion Source\n"
-" -----------------"
-msgstr ""
+" '''''''''''''''''"
+msgstr ""
+" Subversion-källa\n"
+" ''''''''''''''''"
msgid ""
" Subversion source detects classical trunk/branches/tags layouts.\n"
@@ -1198,8 +1292,10 @@
msgid ""
" Perforce Source\n"
-" ---------------"
-msgstr ""
+" '''''''''''''''"
+msgstr ""
+" Perforce-källa\n"
+" ''''''''''''''"
msgid ""
" The Perforce (P4) importer can be given a p4 depot path or a\n"
@@ -1222,8 +1318,10 @@
msgid ""
" Mercurial Destination\n"
-" ---------------------"
-msgstr ""
+" '''''''''''''''''''''"
+msgstr ""
+" Mercurial-destination\n"
+" '''''''''''''''''''''"
msgid ""
" --config convert.hg.clonebranches=False (boolean)\n"
@@ -1253,21 +1351,24 @@
" dates."
msgstr ""
-msgid "username mapping filename"
+msgid "username mapping filename (DEPRECATED, use --authormap instead)"
+msgstr ""
+
+msgid "source repository type"
msgstr ""
msgid "destination repository type"
msgstr ""
+msgid "import up to target revision REV"
+msgstr ""
+
+msgid "remap usernames using this file"
+msgstr ""
+
msgid "remap file names using contents of file"
msgstr ""
-msgid "import up to target revision REV"
-msgstr ""
-
-msgid "source repository type"
-msgstr ""
-
msgid "splice synthesized history into place"
msgstr ""
@@ -1382,8 +1483,8 @@
msgid "%s: unknown repository type"
msgstr "%s: okänd arkivtyp"
-msgid "retrieving file"
-msgstr "hämtar fil"
+msgid "getting files"
+msgstr "hämtar filer"
msgid "revisions"
msgstr "revisioner"
@@ -1555,6 +1656,13 @@
msgid "Python ElementTree module is not available"
msgstr ""
+#, python-format
+msgid "%s repository format is unsupported, please upgrade"
+msgstr ""
+
+msgid "failed to detect repository format!"
+msgstr ""
+
msgid "internal calling inconsistency"
msgstr ""
@@ -1562,10 +1670,18 @@
msgstr ""
#, python-format
+msgid "%s:%d: path to %s is missing\n"
+msgstr ""
+
+#, python-format
msgid "%s:%d: %r already in %s list\n"
msgstr ""
#, python-format
+msgid "%s:%d: superfluous / in %s %r\n"
+msgstr ""
+
+#, python-format
msgid "%s:%d: unknown directive %r\n"
msgstr ""
@@ -1749,7 +1865,7 @@
msgid "unable to cope with svn output"
msgstr ""
-msgid "XXX TAGS NOT IMPLEMENTED YET\n"
+msgid "writing Subversion tags is not yet implemented\n"
msgstr ""
msgid "automatically manage newlines in repository files"
@@ -1974,9 +2090,13 @@
" revisions are specified, the working directory files are compared\n"
" to its parent."
msgstr ""
+" När två revisionsargument ges, kommer ändringar mellan revisionerna\n"
+" att visas. Om bara en revision anges så jämförs den revisionen med\n"
+" arbetskatalogen, och, när ingen revision anges, jämförs arbetskatalogen\n"
+" med dess förälder."
msgid "CMD"
-msgstr ""
+msgstr "KMD"
msgid "comparison program to run"
msgstr ""
@@ -2032,29 +2152,36 @@
" order, use --switch-parent."
msgstr ""
-msgid ""
-" See :hg:`help dates` for a list of formats valid for -d/--date.\n"
+msgid " See :hg:`help dates` for a list of formats valid for -d/--date."
+msgstr " Se :hg:`help dates` för en lista med giltiga format för -d/--date."
+
+msgid ""
+" Returns 0 on success.\n"
" "
msgstr ""
-" Se :hg:`help dates` för en lista med giltiga format för -d/--date.\n"
+" Returnerar 0 om kommandot lyckades.\n"
" "
msgid ""
"working dir not at branch tip (use \"hg update\" to check out branch tip)"
msgstr ""
+"arbetskatalogen är inte på grentoppen (använd \"hg update\" för att hämta ut "
+"grentoppen)"
msgid "outstanding uncommitted merge"
-msgstr ""
+msgstr "kvarvarande oarkiverad sammanfogning"
msgid "outstanding uncommitted changes"
-msgstr ""
+msgstr "kvarvarande oarkiverade ändringar"
msgid "working directory is missing some files"
-msgstr ""
+msgstr "arbetskatalogen saknar några filer"
msgid ""
"multiple heads in this branch (use \"hg heads .\" and \"hg merge\" to merge)"
msgstr ""
+"flera huvuden i denna gren (använd \"hg heads .\" och \"hg merge\" för att "
+"sammanfoga)"
#, python-format
msgid "pulling from %s\n"
@@ -2064,79 +2191,92 @@
"Other repository doesn't support revision lookup, so a rev cannot be "
"specified."
msgstr ""
+"Det andra arkivet stödjer inte revisionsuppslag, så en revision kan inte "
+"anges."
#, python-format
msgid ""
"not merging with %d other new branch heads (use \"hg heads .\" and \"hg merge"
"\" to merge them)\n"
msgstr ""
+"sammanfogar inte med %d andra nya grenhuvuden (använd \"hg heads .\" och "
+"\"hg merge\" för att sammanfoga dem)\n"
#, python-format
msgid "updating to %d:%s\n"
-msgstr ""
+msgstr "uppdaterar till %d:%s\n"
#, python-format
msgid "merging with %d:%s\n"
-msgstr ""
+msgstr "sammanfogar med %d:%s\n"
#, python-format
msgid "new changeset %d:%s merges remote changes with local\n"
-msgstr ""
+msgstr "nya ändringen %d:%s sammanfogar fjärrändringar med lokala\n"
msgid "a specific revision you would like to pull"
-msgstr ""
+msgstr "en specifik revision som du vill dra"
msgid "edit commit message"
-msgstr ""
+msgstr "redigera arkiveringsmeddelande"
msgid "edit commit message (DEPRECATED)"
-msgstr ""
+msgstr "redigera arkiveringsmeddelande (FÖRÅLDRAD)"
msgid "switch parents when merging"
-msgstr ""
+msgstr "byt föräldrar vid sammanfogning"
msgid "hg fetch [SOURCE]"
-msgstr ""
+msgstr "hg fetch [KÄLLA]"
msgid "commands to sign and verify changesets"
-msgstr ""
+msgstr "kommandon för att signera och verifiera ändringar"
msgid "error while verifying signature"
-msgstr ""
+msgstr "fel vid verifiering av signatur"
#, python-format
msgid "%s Bad signature from \"%s\"\n"
-msgstr ""
+msgstr "%s Dålig signatur från \"%s\"\n"
#, python-format
msgid "%s Note: Signature has expired (signed by: \"%s\")\n"
-msgstr ""
+msgstr "%s Notera: Signaturen har gått ut (signerad av: \"%s\")\n"
#, python-format
msgid "%s Note: This key has expired (signed by: \"%s\")\n"
-msgstr ""
+msgstr "%s Notera: Den här nyckenl har gått ut (signerad av: \"%s\")\n"
msgid "list signed changesets"
-msgstr ""
+msgstr "visa signerade ändringar"
#, python-format
msgid "%s:%d node does not exist\n"
-msgstr ""
+msgstr "%s:%d noden existerar inte\n"
msgid "verify all the signatures there may be for a particular revision"
-msgstr ""
+msgstr "verifiera alla signaturerna som finns för en viss revision"
#, python-format
msgid "No valid signature for %s\n"
-msgstr ""
+msgstr "Ingen giltig signatur för %s\n"
msgid "add a signature for the current or given revision"
-msgstr ""
+msgstr "lägg till en signatur för den aktuella eller angivna revisionen"
msgid ""
" If no revision is given, the parent of the working directory is used,\n"
" or tip if no revision is checked out."
msgstr ""
+" Om ingen revision anges, så används arbetskatalogens föräldern, eller\n"
+" toppen om ingen revision är uthämtad."
+
+msgid ""
+" See :hg:`help dates` for a list of formats valid for -d/--date.\n"
+" "
+msgstr ""
+" Se :hg:`help dates` för en lista med giltiga format för -d/--date.\n"
+" "
msgid "uncommitted merge - please provide a specific revision"
msgstr ""
@@ -2145,7 +2285,7 @@
msgid "Signing %d:%s\n"
msgstr "Signerar %d:%s\n"
-msgid "Error while signing"
+msgid "error while signing"
msgstr ""
msgid ""
@@ -2313,7 +2453,7 @@
msgid ""
"The :hg:`view` command will launch the hgk Tcl script. For this command\n"
"to work, hgk must be in your search path. Alternately, you can specify\n"
-"the path to hgk in your .hgrc file::"
+"the path to hgk in your configuration file::"
msgstr ""
msgid ""
@@ -2642,6 +2782,11 @@
msgstr ""
msgid ""
+"Keywords expand to the changeset data pertaining to the latest change\n"
+"relative to the working directory parent of each file."
+msgstr ""
+
+msgid ""
"Configuration is done in the [keyword], [keywordset] and [keywordmaps]\n"
"sections of hgrc files."
msgstr ""
@@ -2663,8 +2808,9 @@
msgstr ""
msgid ""
-"NOTE: the more specific you are in your filename patterns the less you\n"
-"lose speed in huge repositories."
+".. note::\n"
+" The more specific you are in your filename patterns the less you\n"
+" lose speed in huge repositories."
msgstr ""
msgid ""
@@ -3248,6 +3394,10 @@
msgid "patch %s does not exist"
msgstr ""
+#, python-format
+msgid "renaming %s to %s\n"
+msgstr "döper om %s till %s\n"
+
msgid "need --name to import a patch from -"
msgstr ""
@@ -3276,6 +3426,9 @@
msgid "print the patches already applied"
msgstr ""
+msgid " Returns 0 on success."
+msgstr " Returnerar 0 om kommandot lyckades."
+
msgid "only one patch applied\n"
msgstr ""
@@ -3321,9 +3474,21 @@
msgid ""
" To import a patch from standard input, pass - as the patch file.\n"
" When importing from standard input, a patch name must be specified\n"
-" using the --name flag.\n"
+" using the --name flag."
+msgstr ""
+
+msgid " To import an existing patch while renaming it::"
+msgstr ""
+
+msgid " hg qimport -e existing-patch -n new-name"
+msgstr ""
+
+msgid ""
+" Returns 0 if import succeeded.\n"
" "
msgstr ""
+" Returnerar 0 om importeringen lyckades.\n"
+" "
msgid "init a new queue repository (DEPRECATED)"
msgstr ""
@@ -3359,9 +3524,15 @@
msgid ""
" The patch directory must be a nested Mercurial repository, as\n"
-" would be created by :hg:`init --mq`.\n"
+" would be created by :hg:`init --mq`."
+msgstr ""
+
+msgid ""
+" Return 0 on success.\n"
" "
msgstr ""
+" Returnerar 0 om kommandot lyckades.\n"
+" "
msgid "versioned patch repository not found (see init --mq)"
msgstr "versionshanterat patcharkiv hittades inte (se init --mq)"
@@ -3425,12 +3596,18 @@
" Use the -g/--git option to keep the patch in the git extended diff\n"
" format. Read the diffs help topic for more information on why this\n"
" is important for preserving permission changes and copy/rename\n"
-" information.\n"
+" information."
+msgstr ""
+
+msgid ""
+" Returns 0 on successful creation of a new patch.\n"
" "
msgstr ""
+" Returnerar 0 om en patch skapades.\n"
+" "
msgid "update the current patch"
-msgstr ""
+msgstr "uppdatera den nuvarande patchen"
msgid ""
" If any file patterns are provided, the refreshed patch will\n"
@@ -3444,11 +3621,18 @@
msgstr ""
msgid ""
+" If -e/--edit is specified, Mercurial will start your configured editor "
+"for\n"
+" you to enter a message. In case qrefresh fails, you will find a backup "
+"of\n"
+" your message in ``.hg/last-message.txt``."
+msgstr ""
+
+msgid ""
" hg add/remove/copy/rename work as usual, though you might want to\n"
" use git-style patches (-g/--git or [diff] git=1) to track copies\n"
" and renames. See the diffs help topic for more information on the\n"
-" git diff format.\n"
-" "
+" git diff format."
msgstr ""
msgid "option \"-e\" incompatible with \"-m\" or \"-l\""
@@ -3468,8 +3652,7 @@
" Use :hg:`diff` if you only want to see the changes made since the\n"
" last qrefresh, or :hg:`export qtip` if you want to see changes\n"
" made by the current patch without including changes made since the\n"
-" qrefresh.\n"
-" "
+" qrefresh."
msgstr ""
msgid "fold the named patches into the current patch"
@@ -3486,25 +3669,22 @@
msgid ""
" The header for each folded patch will be concatenated with the\n"
-" current patch header, separated by a line of '* * *'."
+" current patch header, separated by a line of ``* * *``."
msgstr ""
msgid "qfold requires at least one patch name"
msgstr ""
-msgid "No patches applied"
-msgstr ""
-
-#, python-format
-msgid "Skipping already folded patch %s"
-msgstr ""
+#, python-format
+msgid "Skipping already folded patch %s\n"
+msgstr "Hoppar över redan hopvikta patchen %s\n"
#, python-format
msgid "qfold cannot fold already applied patch %s"
msgstr ""
#, python-format
-msgid "Error folding patch %s"
+msgid "error folding patch %s"
msgstr ""
msgid "push or pop patches until named patch is at top of stack"
@@ -3524,16 +3704,18 @@
msgid ""
" With no arguments, print the currently active guards.\n"
-" With arguments, set guards for the named patch.\n"
-" NOTE: Specifying negative guards now requires '--'."
+" With arguments, set guards for the named patch."
+msgstr ""
+
+msgid ""
+" .. note::\n"
+" Specifying negative guards now requires '--'."
msgstr ""
msgid " To set guards on another patch::"
msgstr ""
-msgid ""
-" hg qguard other.patch -- +2.6.17 -stable\n"
-" "
+msgid " hg qguard other.patch -- +2.6.17 -stable"
msgstr ""
msgid "cannot mix -l/--list with options or arguments"
@@ -3554,9 +3736,15 @@
msgid ""
" When -f/--force is applied, all local changes in patched files\n"
-" will be lost.\n"
+" will be lost."
+msgstr ""
+
+msgid ""
+" Return 0 on succces.\n"
" "
msgstr ""
+" Returnerar 0 om kommandot lyckades.\n"
+" "
msgid "no saved queues found, please use -n\n"
msgstr ""
@@ -3571,8 +3759,7 @@
msgid ""
" By default, pops off the top of the patch stack. If given a patch\n"
" name, keeps popping off patches until the named patch is at the\n"
-" top of the stack.\n"
-" "
+" top of the stack."
msgstr ""
#, python-format
@@ -3595,15 +3782,11 @@
msgid "A patch named %s already exists in the series file"
msgstr ""
-#, python-format
-msgid "renaming %s to %s\n"
-msgstr "döper om %s till %s\n"
-
msgid "restore the queue state saved by a revision (DEPRECATED)"
msgstr ""
-msgid " This command is deprecated, use rebase --mq instead."
-msgstr ""
+msgid " This command is deprecated, use :hg:`rebase` instead."
+msgstr " Detta är ett förlegat kommando; använd :hg:`rebase` istället."
msgid "save current queue state (DEPRECATED)"
msgstr ""
@@ -3620,15 +3803,13 @@
msgid "copy %s to %s\n"
msgstr ""
-msgid "strip a changeset and all its descendants from the repository"
-msgstr ""
-
-msgid ""
-" The strip command removes all changesets whose local revision\n"
-" number is greater than or equal to REV, and then restores any\n"
-" changesets that are not descendants of REV. If the working\n"
-" directory has uncommitted changes, the operation is aborted unless\n"
-" the --force flag is supplied."
+msgid "strip changesets and all their descendants from the repository"
+msgstr ""
+
+msgid ""
+" The strip command removes the specified changesets and all their\n"
+" descendants. If the working directory has uncommitted changes,\n"
+" the operation is aborted unless the --force flag is supplied."
msgstr ""
msgid ""
@@ -3648,10 +3829,12 @@
msgstr ""
msgid ""
-" Use the --nobackup option to discard the backup bundle once the\n"
-" operation completes.\n"
-" "
-msgstr ""
+" Use the --no-backup option to discard the backup bundle once the\n"
+" operation completes."
+msgstr ""
+
+msgid "empty revision set"
+msgstr "tomt revisionsset"
msgid "set or print guarded patches to push"
msgstr ""
@@ -3748,8 +3931,7 @@
msgid ""
" This can be especially useful if your changes have been applied to\n"
" an upstream repository, or if you are about to push your changes\n"
-" to upstream.\n"
-" "
+" to upstream."
msgstr ""
msgid "no revisions specified"
@@ -3781,13 +3963,18 @@
msgid ""
" To delete an existing queue, use --delete. You cannot delete the "
"currently\n"
-" active queue.\n"
-" "
+" active queue."
msgstr ""
msgid "patches applied - cannot set new queue active"
msgstr ""
+msgid "cannot delete queue that does not exist"
+msgstr ""
+
+msgid "cannot delete currently active queue"
+msgstr ""
+
msgid " (active)\n"
msgstr " (aktiv)\n"
@@ -3798,10 +3985,12 @@
msgid "queue \"%s\" already exists"
msgstr "kön \"%s\" finns redan"
-msgid "cannot delete queue that does not exist"
-msgstr ""
-
-msgid "cannot delete currently active queue"
+#, python-format
+msgid "can't rename \"%s\" to its current name"
+msgstr ""
+
+#, python-format
+msgid "non-queue directory \"%s\" already exists"
msgstr ""
msgid "use --create to create a new queue"
@@ -3827,8 +4016,8 @@
msgid "only a local queue repository may be initialized"
msgstr "bara ett lokalt köarkiv kan initialiseras"
-msgid "There is no Mercurial repository here (.hg not found)"
-msgstr "Det finns inget Mercurial-arkiv här (.hg hittades inte)"
+msgid "there is no Mercurial repository here (.hg not found)"
+msgstr "det finns inget Mercurial-arkiv här (.hg hittades inte)"
msgid "no queue repository"
msgstr "inget köarkiv"
@@ -3886,8 +4075,8 @@
msgid "stop managing a revision (DEPRECATED)"
msgstr ""
-msgid "hg qdelete [-k] [-r REV]... [PATCH]..."
-msgstr ""
+msgid "hg qdelete [-k] [PATCH]..."
+msgstr "hg qdelete [-k] [PATCH]..."
msgid "edit patch header"
msgstr ""
@@ -3979,10 +4168,10 @@
msgid "forget any local changes to patched files"
msgstr ""
-msgid "hg qpop [-a] [-n NAME] [-f] [PATCH | INDEX]"
-msgstr ""
-
-msgid "apply if the patch has rejects"
+msgid "hg qpop [-a] [-f] [PATCH | INDEX]"
+msgstr "hg qpop [-a] [-f] [PATCH | INDEX]"
+
+msgid "apply on top of local changes"
msgstr ""
msgid "list patch name in commit text"
@@ -4000,8 +4189,8 @@
msgid "reorder patch series and apply only the patch"
msgstr "omordna patchserien och applicera bara patchen"
-msgid "hg qpush [-f] [-l] [-a] [-m] [-n NAME] [--move] [PATCH | INDEX]"
-msgstr "hg qpush [-f] [-l] [-a] [-m] [-n NAMN] [--move] [PATCH | INDEX]"
+msgid "hg qpush [-f] [-l] [-a] [--move] [PATCH | INDEX]"
+msgstr "hg qpush [-f] [-l] [-a] [--move] [PATCH | INDEX]"
msgid "refresh only files already in the patch and specified files"
msgstr ""
@@ -4084,25 +4273,31 @@
"ättling till REV (FÖRLEGAD)"
msgid "no backups"
-msgstr ""
-
-msgid "hg strip [-f] [-n] REV"
-msgstr "hg strip [-f] [-n] REV"
+msgstr "inga säkerhetskopior"
+
+msgid "no backups (DEPRECATED)"
+msgstr "inga säkerhetskopior (FÖRÅLDRAD)"
+
+msgid "do not modify working copy during strip"
+msgstr "modifiera inte arbetskopian vid strippning"
+
+msgid "hg strip [-k] [-f] [-n] REV..."
+msgstr "hg strip [-k] [-f] [-n] REV..."
msgid "hg qtop [-s]"
-msgstr ""
+msgstr "hg qtop [-s]"
msgid "show only the first patch"
msgstr "visa bara den första patchen"
msgid "hg qunapplied [-1] [-s] [PATCH]"
-msgstr ""
+msgstr "hg qunapplied [-1] [-s] [PATCH]"
msgid "finish all applied changesets"
msgstr ""
msgid "hg qfinish [-a] [REV]..."
-msgstr ""
+msgstr "hg qfinish [-a] [REV]..."
msgid "list all available queues"
msgstr "visa alla tillgängliga köer"
@@ -4110,9 +4305,15 @@
msgid "create new queue"
msgstr "skapa ny kö"
+msgid "rename active queue"
+msgstr "döp om aktiv kö"
+
msgid "delete reference to queue"
msgstr ""
+msgid "delete queue, and remove patch dir"
+msgstr ""
+
msgid "[OPTION] [QUEUE]"
msgstr "[FLAGGA] [KÖ]"
@@ -4244,14 +4445,32 @@
msgstr ""
msgid ""
+"By default, the pager is only executed if a command has output. To\n"
+"force the pager to run even if a command prints nothing, set::"
+msgstr ""
+"Som standard körs bara pagineraren om ett kommando visar något. För att\n"
+"tvinga pagineraren att köra även om ett kommando inte visar något, sätt::"
+
+msgid ""
+" [pager]\n"
+" force = True"
+msgstr ""
+" [pager]\n"
+" force = True"
+
+msgid ""
"If you notice \"BROKEN PIPE\" error messages, you can disable them by\n"
"setting::"
msgstr ""
+"Om du får felmeddelanden om \"BROKEN PIPE\", så kan du deaktivera dem\n"
+"genom att sätta::"
msgid ""
" [pager]\n"
" quiet = True"
msgstr ""
+" [pager]\n"
+" quiet = True"
msgid ""
"You can disable the pager for certain commands by adding them to the\n"
@@ -4283,8 +4502,22 @@
msgid ""
"To ignore global commands like :hg:`version` or :hg:`help`, you have\n"
-"to specify them in the global .hgrc\n"
-msgstr ""
+"to specify them in your user configuration file."
+msgstr ""
+"För att ignorera globala kommandon som :hg:`version` eller :hg:`help`, så\n"
+"måste du ange dem i din användarkonfigurationsfil."
+
+msgid ""
+"The --pager=... option can also be used to control when the pager is\n"
+"used. Use a boolean value like yes, no, on, off, or use auto for\n"
+"normal behavior.\n"
+msgstr ""
+"Flaggan --pager=... kan också användas för att kontrollera när pagineraren\n"
+"används. Använd ett booleskt värde som yes, no, on off, eller använd auto\n"
+"för normalt uppförande.\n"
+
+msgid "when to paginate (boolean, always, auto, or never)"
+msgstr "när paginering ska ske (boolean, always, auto eller never)"
msgid "interpret suffixes to refer to ancestor revisions"
msgstr ""
@@ -4339,12 +4572,6 @@
msgstr ""
msgid ""
-"With the -d/--diffstat option, you will be prompted for each changeset\n"
-"with a diffstat summary and the changeset summary, so you can be sure\n"
-"you are sending the right changes."
-msgstr ""
-
-msgid ""
"To configure other defaults, add a section like this to your hgrc\n"
"file::"
msgstr ""
@@ -4369,39 +4596,6 @@
msgstr ""
msgid ""
-"To avoid sending patches prematurely, it is a good idea to first run\n"
-"the :hg:`email` command with the \"-n\" option (test only). You will be\n"
-"prompted for an email recipient address, a subject and an introductory\n"
-"message describing the patches of your patchbomb. Then when all is\n"
-"done, patchbomb messages are displayed. If the PAGER environment\n"
-"variable is set, your pager will be fired up once for each patchbomb\n"
-"message, so you can verify everything is alright."
-msgstr ""
-
-msgid ""
-"The -m/--mbox option is also very useful. Instead of previewing each\n"
-"patchbomb message in a pager or sending the messages directly, it will\n"
-"create a UNIX mailbox file with the patch emails. This mailbox file\n"
-"can be previewed with any mail user agent which supports UNIX mbox\n"
-"files, e.g. with mutt::"
-msgstr ""
-
-msgid " % mutt -R -f mbox"
-msgstr ""
-
-msgid ""
-"When you are previewing the patchbomb messages, you can use ``formail``\n"
-"(a utility that is commonly installed as part of the procmail\n"
-"package), to send each message out::"
-msgstr ""
-
-msgid " % formail -s sendmail -bm -t < mbox"
-msgstr ""
-
-msgid "That should be all. Now your patchbomb is on its way out."
-msgstr ""
-
-msgid ""
"You can also either configure the method option in the email section\n"
"to be a sendmail compatible mailer or fill out the [smtp] section so\n"
"that the patchbomb extension can automatically send patchbombs\n"
@@ -4416,12 +4610,6 @@
msgid "Please enter a valid value.\n"
msgstr "Ange ett giltigt värde.\n"
-msgid "does the diffstat above look okay?"
-msgstr "ser diffstaten ovanför okej ut?"
-
-msgid "diffstat rejected"
-msgstr "diffstat avvisad"
-
msgid "send changesets by email"
msgstr ""
@@ -4435,10 +4623,21 @@
" Each patch email has a Subject line of \"[PATCH M of N] ...\", using\n"
" the first line of the changeset description as the subject text.\n"
" The message contains two or three parts. First, the changeset\n"
-" description. Next, (optionally) if the diffstat program is\n"
-" installed and -d/--diffstat is used, the result of running\n"
-" diffstat on the patch. Finally, the patch itself, as generated by\n"
-" :hg:`export`."
+" description."
+msgstr ""
+
+msgid ""
+" With the -d/--diffstat option, if the diffstat program is\n"
+" installed, the result of running diffstat on the patch is inserted."
+msgstr ""
+
+msgid " Finally, the patch itself, as generated by :hg:`export`."
+msgstr ""
+
+msgid ""
+" With the -d/--diffstat or -c/--confirm options, you will be presented\n"
+" with a final summary of all messages and asked for confirmation before\n"
+" the messages are sent."
msgstr ""
msgid ""
@@ -4461,6 +4660,23 @@
msgstr ""
msgid ""
+" With -m/--mbox, instead of previewing each patchbomb message in a\n"
+" pager or sending the messages directly, it will create a UNIX\n"
+" mailbox file with the patch emails. This mailbox file can be\n"
+" previewed with any mail user agent which supports UNIX mbox\n"
+" files."
+msgstr ""
+
+msgid ""
+" With -n/--test, all steps will run, but mail will not be sent.\n"
+" You will be prompted for an email recipient address, a subject and\n"
+" an introductory message describing the patches of your patchbomb.\n"
+" Then when all is done, patchbomb messages are displayed. If the\n"
+" PAGER environment variable is set, your pager will be fired up once\n"
+" for each patchbomb message, so you can verify everything is alright."
+msgstr ""
+
+msgid ""
" hg email -r 3000 # send patch 3000 only\n"
" hg email -r 3000 -r 3001 # send patches 3000 and 3001\n"
" hg email -r 3000:3005 # send patches 3000 through 3005\n"
@@ -4483,6 +4699,15 @@
msgstr ""
msgid ""
+" hg email -o -m mbox && # generate an mbox file...\n"
+" mutt -R -f mbox # ... and view it with mutt\n"
+" hg email -o -m mbox && # generate an mbox file ...\n"
+" formail -s sendmail \\ # ... and use formail to send from the "
+"mbox\n"
+" -bm -t < mbox # ... using sendmail"
+msgstr ""
+
+msgid ""
" Before using this command, you will need to enable email in your\n"
" hgrc. See the [email] section in hgrc(5) for details.\n"
" "
@@ -4509,17 +4734,37 @@
msgid "This patch series consists of %d patches."
msgstr ""
-msgid "Final summary:\n"
+msgid ""
+"\n"
+"Final summary:"
+msgstr ""
+
+msgid "are you sure you want to send (yn)?"
+msgstr ""
+
+msgid "&No"
+msgstr ""
+
+msgid "&Yes"
+msgstr ""
+
+msgid "patchbomb canceled"
msgstr ""
msgid "Displaying "
-msgstr ""
+msgstr "Visar "
msgid "Writing "
-msgstr ""
+msgstr "Skriver "
+
+msgid "writing"
+msgstr "skriver"
msgid "Sending "
-msgstr ""
+msgstr "Sänder "
+
+msgid "sending"
+msgstr "sänder"
msgid "send patches as attachments"
msgstr ""
@@ -4533,6 +4778,9 @@
msgid "email addresses of copy recipients"
msgstr ""
+msgid "ask for confirmation before sending"
+msgstr ""
+
msgid "add diffstat output to messages"
msgstr ""
@@ -4804,6 +5052,12 @@
msgid "cannot use both keepbranches and extrafn"
msgstr ""
+msgid "rebasing"
+msgstr ""
+
+msgid "changesets"
+msgstr "ändringar"
+
msgid "fix unresolved conflicts with hg resolve then run hg rebase --continue"
msgstr "fixa olösta konflikter med hg resolve, kör sedan hg rebase --continue"
@@ -4954,9 +5208,6 @@
" Om filer inte anges, kommer alla ändringar som :hg:`status`\n"
" rapporterar att arkiveras."
-msgid " See :hg:`help dates` for a list of formats valid for -d/--date."
-msgstr " Se :hg:`help dates` för en lista med giltiga format för -d/--date."
-
msgid ""
" You will be prompted for whether to record changes to each\n"
" modified file, and for files with multiple changes, for each\n"
@@ -4998,9 +5249,6 @@
msgid "no changes to record\n"
msgstr ""
-msgid "patch failed to apply"
-msgstr ""
-
msgid "hg record [OPTION]... [FILE]..."
msgstr ""
@@ -5076,9 +5324,6 @@
msgid "not linkable: %s\n"
msgstr "inte länkbar: %s\n"
-msgid " files"
-msgstr " filer"
-
msgid "pruning"
msgstr "putsar"
@@ -5162,15 +5407,16 @@
msgstr ""
msgid ""
-" NOTE: using rollback or extensions that destroy/modify history\n"
-" (mq, rebase, etc.) can cause considerable confusion with shared\n"
-" clones. In particular, if two shared clones are both updated to\n"
-" the same changeset, and one of them destroys that changeset with\n"
-" rollback, the other clone will suddenly stop working: all\n"
-" operations will fail with \"abort: working directory has unknown\n"
-" parent\". The only known workaround is to use debugsetparents on\n"
-" the broken clone to reset it to a changeset that still exists\n"
-" (e.g. tip).\n"
+" .. note::\n"
+" using rollback or extensions that destroy/modify history (mq,\n"
+" rebase, etc.) can cause considerable confusion with shared\n"
+" clones. In particular, if two shared clones are both updated to\n"
+" the same changeset, and one of them destroys that changeset\n"
+" with rollback, the other clone will suddenly stop working: all\n"
+" operations will fail with \"abort: working directory has unknown\n"
+" parent\". The only known workaround is to use debugsetparents on\n"
+" the broken clone to reset it to a changeset that still exists\n"
+" (e.g. tip).\n"
" "
msgstr ""
@@ -5221,7 +5467,7 @@
msgid "%s: empty changeset"
msgstr ""
-msgid "Fix up the merge and run hg transplant --continue"
+msgid "fix up the merge and run hg transplant --continue"
msgstr ""
#, python-format
@@ -5334,6 +5580,21 @@
msgid "outstanding local changes"
msgstr ""
+msgid ""
+"\n"
+"Added by the transplant extension:"
+msgstr ""
+"\n"
+"Tillagda av transplant-utökningen:"
+
+msgid ""
+"``transplanted(set)``\n"
+" Transplanted changesets in set.\n"
+msgstr ""
+
+msgid "Specifying Revision Sets"
+msgstr "Ange Revisionsset"
+
msgid "pull patches from REPO"
msgstr ""
@@ -5566,18 +5827,6 @@
msgid "integrity check failed on %s:%d"
msgstr ""
-#, python-format
-msgid "%s: not a Mercurial bundle file"
-msgstr ""
-
-#, python-format
-msgid "%s: unknown bundle version"
-msgstr ""
-
-#, python-format
-msgid "%s: unknown bundle compression type"
-msgstr ""
-
msgid "cannot create new bundle repository"
msgstr ""
@@ -5585,6 +5834,14 @@
msgid "premature EOF reading chunk (got %d bytes, expected %d)"
msgstr ""
+#, python-format
+msgid "%s: not a Mercurial bundle"
+msgstr "%s: inte en Mercurial-buntfil"
+
+#, python-format
+msgid "%s: unknown bundle version %s"
+msgstr "%s: okänd buntversion %s"
+
msgid "empty username"
msgstr "tomt användarnamn"
@@ -5609,9 +5866,6 @@
msgid "limit must be positive"
msgstr ""
-msgid "too many revisions specified"
-msgstr "för många revisioner angivna"
-
#, python-format
msgid "invalid format spec '%%%s' in output filename"
msgstr ""
@@ -5768,6 +6022,10 @@
msgid "can only follow copies/renames for explicit filenames"
msgstr ""
+#, python-format
+msgid "skipping missing subrepository: %s\n"
+msgstr ""
+
msgid "HG: Enter commit message. Lines beginning with 'HG:' are removed."
msgstr ""
@@ -5928,13 +6186,6 @@
" som upptäcks vara binära. Med -a, kommer filen att annoteras ändå, även\n"
" om resultatet antagligen inte kommer att vara användbart."
-msgid ""
-" Returns 0 on success.\n"
-" "
-msgstr ""
-" Returnerar 0 om kommandot lyckades.\n"
-" "
-
msgid "at least one filename or pattern is required"
msgstr ""
@@ -6010,32 +6261,50 @@
msgstr "omvänd effekten från en tidigare ändring"
msgid ""
-" Commit the backed out changes as a new changeset. The new\n"
-" changeset is a child of the backed out changeset."
-msgstr ""
-" Arkivera de återkallade ändringarna som en ny ändring. Den nya\n"
-" ändringen är ett barn till den återkallade ändringen."
-
-msgid ""
-" If you backout a changeset other than the tip, a new head is\n"
-" created. This head will be the new tip and you should merge this\n"
-" backout changeset with another head."
-msgstr ""
-" Om du återkallar en annan ändring än toppen, skapas ett nytt huvud.\n"
-" Detta huvud kommer att vara en nya toppen och du bör sammanfoga den med\n"
-" ett annat huvud."
-
-msgid ""
+" The backout command merges the reverse effect of the reverted\n"
+" changeset into the working directory."
+msgstr ""
+" Kommandot backout sammanfogar den omvända effekven av den återkallade\n"
+" ändringen i arbetskatalogen."
+
+msgid ""
+" With the --merge option, it first commits the reverted changes\n"
+" as a new changeset. This new changeset is a child of the reverted\n"
+" changeset.\n"
" The --merge option remembers the parent of the working directory\n"
" before starting the backout, then merges the new head with that\n"
-" changeset afterwards. This saves you from doing the merge by hand.\n"
-" The result of this merge is not committed, as with a normal merge."
-msgstr ""
+" changeset afterwards.\n"
+" This will result in an explicit merge in the history."
+msgstr ""
+" Med flaggan --merge arkiveras först de återkallade ändringarna som en\n"
+" ny ändring. Denna ny ändring är en ättling till den återkallade\n"
+" ändringen.\n"
" Flaggan --merge kommer ihåg arbetskatalogens förälder innan\n"
" återkallningen påbörjas, och sammanfogar sedan det nya huvudet med den\n"
-" ändringen efteråt. Detta gör att du inte behöver göra sammanfogningen\n"
-" manuellt. Resultatet av sammanfogningen arkiveras inte, precis som en\n"
-" vanlig sammanfogning."
+" ändringen efteråt.\n"
+" Detta resulterar i en explicit sammanfogning i historiken"
+
+msgid ""
+" If you backout a changeset other than the original parent of the\n"
+" working directory, the result of this merge is not committed,\n"
+" as with a normal merge. Otherwise, no merge is needed and the\n"
+" commit is automatic."
+msgstr ""
+" Om du tar tillbaka en annan ändring än originalföräldern till\n"
+" arbetskatalogen, så arkiveras inte resultatet av sammanfogningen, som\n"
+" vid en normal sammanfogning. Annars behövs ingen sammanfogning, och\n"
+" arkiveringen är automatisk."
+
+msgid ""
+" Note that the default behavior (without --merge) has changed in\n"
+" version 1.7. To restore the previous default behavior, use\n"
+" :hg:`backout --merge` and then :hg:`update --clean .` to get rid of\n"
+" the ongoing merge."
+msgstr ""
+" Notera att standardförfarandet (utan --merge) har ändrats i version\n"
+" 1.7. För att återställa det gamla standardförfarandet, använd :hg:`\n"
+" backout --merge` och sedan :hg:`update --clean .` för att bli av med\n"
+" den pågående sammanfogningen."
msgid "please specify just one revision"
msgstr "specificera bara en revision"
@@ -6067,12 +6336,6 @@
msgid "merging with changeset %s\n"
msgstr "sammanfogar med ändring %s\n"
-msgid "the backout changeset is a new head - do not forget to merge\n"
-msgstr "återkallningsändringen är ett nytt huvud - glöm inte att sammanfoga\n"
-
-msgid "(use \"backout --merge\" if you want to auto-merge)\n"
-msgstr "(använd \"backout --merge\" om du vill auto-sammanfoga)\n"
-
msgid "subdivision search of changesets"
msgstr "genomsökning av ändringar med halveringsmetoden"
@@ -6120,6 +6383,12 @@
msgid "The first bad revision is:\n"
msgstr "Den första dåliga revisionen är:\n"
+#, python-format
+msgid ""
+"Not all ancestors of this changeset have been checked.\n"
+"To check the other ancestors, start from the common ancestor, %s.\n"
+msgstr ""
+
msgid "Due to skipped revisions, the first good revision could be any of:\n"
msgstr ""
"Tack vare skippade revisioner, är den första bra revisionen någon av:\n"
@@ -6490,11 +6759,15 @@
" eller flaggorna -I/-X."
msgid ""
-" If no commit message is specified, the configured editor is\n"
-" started to prompt you for a message."
-msgstr ""
-" Om inget arkiveringsmeddelande anges, kommer den konfigurerade editorn\n"
-" att startas och fråga om meddelandet."
+" If no commit message is specified, Mercurial starts your\n"
+" configured editor where you can enter a message. In case your\n"
+" commit fails, you will find a backup of your message in\n"
+" ``.hg/last-message.txt``."
+msgstr ""
+" Om inget arkiveringsmeddelande anges, startar Mercurial din\n"
+" konfigurerade editor där du kan skriva ett meddelande. Om din\n"
+" arkivering misslyckas, kommer du att hitta en säkerhetskopia av ditt\n"
+" meddelande i ``.hg/last-message.txt``."
msgid ""
" Returns 0 on success, 1 if nothing changed.\n"
@@ -6600,7 +6873,7 @@
msgid ""
" All string valued-elements are either strictly alphanumeric, or must\n"
-" be enclosed in double quotes (\"...\"), with \"\" as escape character."
+" be enclosed in double quotes (\"...\"), with \"\\\" as escape character."
msgstr ""
msgid ""
@@ -6759,7 +7032,8 @@
msgid " (check that your locale is properly set)\n"
msgstr ""
-msgid "Checking extensions...\n"
+#, python-format
+msgid "Checking installed modules (%s)...\n"
msgstr ""
msgid " One or more extensions could not be found"
@@ -6788,7 +7062,7 @@
msgid ""
" (Current patch tool may be incompatible with patch, or misconfigured. "
-"Please check your .hgrc file)\n"
+"Please check your configuration file)\n"
msgstr ""
msgid ""
@@ -6802,7 +7076,7 @@
msgid " No commit editor set and can't find vi in PATH\n"
msgstr ""
-msgid " (specify a commit editor in your .hgrc file)\n"
+msgid " (specify a commit editor in your configuration file)\n"
msgstr ""
#, python-format
@@ -6812,7 +7086,7 @@
msgid "Checking username...\n"
msgstr ""
-msgid " (specify a username in your .hgrc file)\n"
+msgid " (specify a username in your configuration file)\n"
msgstr ""
msgid "No problems detected\n"
@@ -6846,13 +7120,15 @@
msgstr " Skillnaderna mellan filerna visas i unified diff-format."
msgid ""
-" NOTE: diff may generate unexpected results for merges, as it will\n"
-" default to comparing against the working directory's first parent\n"
-" changeset if no revisions are specified."
-msgstr ""
-" NOTERA: diff kan generera oväntade resultat för sammanfogningar,\n"
-" eftersom den som standard kommer att jämföra mot arbetskatalogens\n"
-" tidigare ändring om ingen revision anges."
+" .. note::\n"
+" diff may generate unexpected results for merges, as it will\n"
+" default to comparing against the working directory's first\n"
+" parent changeset if no revisions are specified."
+msgstr ""
+" .. note::\n"
+" diff kan generera oväntade resultat för sammanfogningar eftersom\n"
+" den som standard kommer att jämföra mot arbetskatalogens tidigare\n"
+" ändring om ingen revision anges."
msgid ""
" Alternatively you can specify -c/--change with a revision to see\n"
@@ -6893,13 +7169,14 @@
" arkiveringskommentar."
msgid ""
-" NOTE: export may generate unexpected diff output for merge\n"
-" changesets, as it will compare the merge changeset against its\n"
-" first parent only."
-msgstr ""
-" NOTERA: export kan generera oväntade resultat för sammanfogningar,\n"
-" eftersom den som standard bara kommer att jämföra mot den första\n"
-" föräldern."
+" .. note::\n"
+" export may generate unexpected diff output for merge\n"
+" changesets, as it will compare the merge changeset against its\n"
+" first parent only."
+msgstr ""
+" .. note::\n"
+" export kan generera oväntade resultat för sammanfogningar, eftersom\n"
+" den som standard bara kommer att jämföra mot den första föräldern."
msgid ""
" Output may be to a file, in which case the name of the file is\n"
@@ -6910,20 +7187,20 @@
msgid ""
" :``%%``: literal \"%\" character\n"
-" :``%H``: changeset hash (40 bytes of hexadecimal)\n"
+" :``%H``: changeset hash (40 hexadecimal digits)\n"
" :``%N``: number of patches being generated\n"
" :``%R``: changeset revision number\n"
" :``%b``: basename of the exporting repository\n"
-" :``%h``: short-form changeset hash (12 bytes of hexadecimal)\n"
+" :``%h``: short-form changeset hash (12 hexadecimal digits)\n"
" :``%n``: zero-padded sequence number, starting at 1\n"
" :``%r``: zero-padded changeset revision number"
msgstr ""
" :``%%``: ett \"%\"-tecken\n"
-" :``%H``: ändringshash (40 hexadecimala bytes)\n"
+" :``%H``: ändringshash (40 hexadecimala siffror)\n"
" :``%N``: antal genererade patchar\n"
" :``%R``: ändringens revisionsnummer\n"
" :``%b``: basnamn för det exporterande arkivet\n"
-" :``%h``: kort ändringshash (12 hexadecimala bytes)\n"
+" :``%h``: kort ändringshash (12 hexadecimala siffror)\n"
" :``%n``: nollpaddat sekvensnummer, börjar med 1\n"
" :``%r``: nollpaddat ändringsrevisionsnummer"
@@ -7142,6 +7419,14 @@
msgstr "(ingen hjälptext tillgänglig)"
#, python-format
+msgid "shell alias for::"
+msgstr "skal-alias för::"
+
+#, python-format
+msgid " %s"
+msgstr " %s"
+
+#, python-format
msgid "alias for: hg %s"
msgstr "alias för: hg %s"
@@ -7331,6 +7616,9 @@
" Returnerar 0 om det finns inkommande ändringar, 1 annars.\n"
" "
+msgid "cannot combine --bundle and --subrepos"
+msgstr ""
+
msgid "create a new repository in the given directory"
msgstr "skapa ett nytt arkiv i den angivna katalogen"
@@ -7434,15 +7722,17 @@
" visas listan med ändrade filer och fullständigt arkiveringsmeddelande."
msgid ""
-" NOTE: log -p/--patch may generate unexpected diff output for merge\n"
-" changesets, as it will only compare the merge changeset against\n"
-" its first parent. Also, only files different from BOTH parents\n"
-" will appear in files:."
-msgstr ""
-" NOTERA: log -p/--patch kan generera oväntad diff-utmatning för\n"
-" sammanfogningar, eftersom det bara kommer att jämföra ändringen mot den\n"
-" första förälder. Dessutom kommer bara filer som skiljer sig från BÅDA\n"
-" föräldrarna att visas i filer:."
+" .. note::\n"
+" log -p/--patch may generate unexpected diff output for merge\n"
+" changesets, as it will only compare the merge changeset against\n"
+" its first parent. Also, only files different from BOTH parents\n"
+" will appear in files:."
+msgstr ""
+" .. note::\n"
+" log -p/--patch kan generera oväntad diff-utmatning för\n"
+" sammanfogningar, eftersom det bara kommer att jämföra ändringen mot\n"
+" den första förälder. Dessutom kommer bara filer som skiljer sig från\n"
+" BÅDA föräldrarna att visas i filer:."
msgid "output the current or given revision of the project manifest"
msgstr "visa den nuvarande eller angivna revisionen av projektmanifestet"
@@ -7485,6 +7775,15 @@
" föräldrar."
msgid ""
+" ``--tool`` can be used to specify the merge tool used for file\n"
+" merges. It overrides the HGMERGE environment variable and your\n"
+" configuration files."
+msgstr ""
+" ``--tool`` kan användas för att ange sammanfogningsverktyg att\n"
+" använda för filsammanfogningar. Det har högre prioritet än\n"
+" miljövariabeln HGMERGE och dina konfigurationsfiler."
+
+msgid ""
" If no revision is specified, the working directory's parent is a\n"
" head revision, and the current branch contains exactly one other\n"
" head, the other head is merged with by default. Otherwise, an\n"
@@ -7495,6 +7794,9 @@
" det andra huvudet som standard. Om inte, måste en explicit revision\n"
" anges."
+msgid " :hg:`resolve` must be used to resolve unresolved files."
+msgstr " :hg:`resolve` måste användas för att lösa olästa filer."
+
msgid ""
" To undo an uncommitted merge, use :hg:`update --clean .` which\n"
" will check out a clean copy of the original merge parent, losing\n"
@@ -7596,12 +7898,13 @@
" definitionen för alla tillgängliga namn."
msgid ""
-" Path names are defined in the [paths] section of\n"
-" ``/etc/mercurial/hgrc`` and ``$HOME/.hgrc``. If run inside a\n"
+" Path names are defined in the [paths] section of your\n"
+" configuration file and in ``/etc/mercurial/hgrc``. If run inside a\n"
" repository, ``.hg/hgrc`` is used, too."
msgstr ""
-" Sökvägar definieras i sektionen [paths] i ``/etc/mercurial/hgrc`` och\n"
-" ``$HOME/.hgrc``. Om det körs i ett arkiv, så används ``.hg/hgrc`` också."
+" Sökvägar definieras i sektionen [paths] i din konfigurationsfil och i\n"
+" ``/etc/mercurial/hgrc``. Om det körs i ett arkiv, så används\n"
+" ``.hg/hgrc`` också."
msgid ""
" The path names ``default`` and ``default-push`` have a special\n"
@@ -7675,6 +7978,13 @@
" filer.\n"
" "
+msgid ""
+"other repository doesn't support revision lookup, so a rev cannot be "
+"specified."
+msgstr ""
+"det andra arkivet stödjer inte revisionsuppslag, så en revision kan inte "
+"anges."
+
msgid "push changes to the specified destination"
msgstr "tryck ändringar till den specificerade destinationen"
@@ -7830,17 +8140,17 @@
msgstr "raderar inte %s: filen är inte hanterad\n"
#, python-format
-msgid "not removing %s: file %s (use -f to force removal)\n"
-msgstr "raderar inte %s: filen %s (använd -f för att tvinga)\n"
-
-msgid "still exists"
-msgstr "existerar fortfarande"
-
-msgid "is modified"
-msgstr "är modifierad"
-
-msgid "has been marked for add"
-msgstr "har markerats för addering"
+msgid "not removing %s: file still exists (use -f to force removal)\n"
+msgstr "raderar inte %s: filen finns fortfarande (använd -f för att tvinga)\n"
+
+#, python-format
+msgid "not removing %s: file is modified (use -f to force removal)\n"
+msgstr "raderar inte %s: filen är ändrad (använd -f för att tvinga)\n"
+
+#, python-format
+msgid ""
+"not removing %s: file has been marked for add (use -f to force removal)\n"
+msgstr "raderar inte %s: filen har lags till (använd -f för att tvinga)\n"
msgid "rename files; equivalent of copy + remove"
msgstr "döp om filer; likvärdig med kopiering + radering"
@@ -7862,58 +8172,54 @@
" namnbyte innan det, se :hg:`revert`.\n"
" "
-msgid "various operations to help finish a merge"
-msgstr "diverse operationer för att slutföra sammanfogningar"
-
-msgid ""
-" This command includes several actions that are often useful while\n"
-" performing a merge, after running ``merge`` but before running\n"
-" ``commit``. (It is only meaningful if your working directory has\n"
-" two parents.) It is most relevant for merges with unresolved\n"
-" conflicts, which are typically a result of non-interactive merging with\n"
-" ``internal:merge`` or a command-line merge tool like ``diff3``."
-msgstr ""
-" Det här kommandot inkludera flera handlingar som ofta är nyttiga när\n"
-" en sammanfogning utförs, efter att ``merge`` körts men innan\n"
-" ``commit``. (Det är bara nyttigt om din arbetskatalog har två\n"
-" föräldrar.) Det är mest relevant för sammanfogningar med olösta\n"
-" konflikter, som är vanliga resultat av icke-interaktiv sammanfogning\n"
-" med ``internal:merge`` eller ett kommandoradsverktyg som ``diff3``."
-
-msgid " The available actions are:"
-msgstr " Tillgängliga handlingar är:"
-
-msgid ""
-" 1) list files that were merged with conflicts (U, for unresolved)\n"
-" and without conflicts (R, for resolved): ``hg resolve -l``\n"
-" (this is like ``status`` for merges)\n"
-" 2) record that you have resolved conflicts in certain files:\n"
-" ``hg resolve -m [file ...]`` (default: mark all unresolved files)\n"
-" 3) forget that you have resolved conflicts in certain files:\n"
-" ``hg resolve -u [file ...]`` (default: unmark all resolved files)\n"
-" 4) discard your current attempt(s) at resolving conflicts and\n"
-" restart the merge from scratch: ``hg resolve file...``\n"
-" (or ``-a`` for all unresolved files)"
-msgstr ""
-" 1) visa filer som är sammanfogade med konflikter (U för olösta) och\n"
-" utan konflikter (R för lösta): ``hg resolve -l`` (detta är som\n"
-" ``status`` för sammanfogningar)\n"
-" 2) lagra att du har löst konflikter i vissa filer:\n"
-" ``hg resolve -m [fil ...]`` (standard: markera alla olösta filer)\n"
-" 3) glöm att du har löst konflikter i vissa filer\n"
-" ``hg resolve -u [fil ...]`` (standard: avmarkera alla lösta filer)\n"
-" 4) kasta bort ditt nuvarande försök att lösa konflikter och starta\n"
-" sammanfogningen från noll: ``hg resolve fil...`` (eller ``-a``\n"
-" för alla olösta filer)"
-
-msgid ""
-" Note that Mercurial will not let you commit files with unresolved merge\n"
-" conflicts. You must use ``hg resolve -m ...`` before you can commit\n"
-" after a conflicting merge."
+msgid "redo merges or set/view the merge status of files"
+msgstr ""
+
+msgid ""
+" Merges with unresolved conflicts are often the result of\n"
+" non-interactive merging using the ``internal:merge`` configuration\n"
+" setting, or a command-line merge tool like ``diff3``. The resolve\n"
+" command is used to manage the files involved in a merge, after\n"
+" :hg:`merge` has been run, and before :hg:`commit` is run (i.e. the\n"
+" working directory must have two parents)."
+msgstr ""
+
+msgid " The resolve command can be used in the following ways:"
+msgstr ""
+
+msgid ""
+" - :hg:`resolve [--tool] FILE...`: attempt to re-merge the specified\n"
+" files, discarding any previous merge attempts. Re-merging is not\n"
+" performed for files already marked as resolved. Use ``--all/-a``\n"
+" to selects all unresolved files. ``--tool`` can be used to specify\n"
+" the merge tool used for the given files. It overrides the HGMERGE\n"
+" environment variable and your configuration files."
+msgstr ""
+
+msgid ""
+" - :hg:`resolve -m [FILE]`: mark a file as having been resolved\n"
+" (e.g. after having manually fixed-up the files). The default is\n"
+" to mark all unresolved files."
+msgstr ""
+
+msgid ""
+" - :hg:`resolve -u [FILE]...`: mark a file as unresolved. The\n"
+" default is to mark all resolved files."
+msgstr ""
+
+msgid ""
+" - :hg:`resolve -l`: list files which had or still have conflicts.\n"
+" In the printed list, ``U`` = unresolved and ``R`` = resolved."
+msgstr ""
+
+msgid ""
+" Note that Mercurial will not let you commit files with unresolved\n"
+" merge conflicts. You must use :hg:`resolve -m ...` before you can\n"
+" commit after a conflicting merge."
msgstr ""
" Notera att Mercurial inte låter dig arkivera filer med olösta\n"
-" konflikter från sammanfogningar. Du måste använda ``hg resolve -m ...``\n"
-" innan du kan arkivera efter en sammanfogning med konflikter"
+" konflikter från sammanfogningar. Du måste använda :hg:`resolve -m ...`\n"
+" innan du kan arkivera efter en sammanfogning med konflikter."
msgid ""
" Returns 0 on success, 1 if any files fail a resolve attempt.\n"
@@ -7937,19 +8243,20 @@
msgstr "återställ filer eller kataloger till ett tidigare tillstånd"
msgid ""
-" NOTE: This command is most likely not what you are looking for. revert\n"
-" will partially overwrite content in the working directory without "
-"changing\n"
-" the working directory parents. Use :hg:`update -r rev` to check out "
-"earlier\n"
-" revisions, or :hg:`update --clean .` to undo a merge which has added\n"
-" another parent."
-msgstr ""
-" NOTERA: Det här kommandot är troligtvis inte det du letar efter.\n"
-" revert kommer att delvis skriva över innehåll i arbetskatalogen utan\n"
-" att ändra arbetskatalogens föräldrar. Använd :hg:`update -r rev` för\n"
-" att hämta ut tidigare revisioner, eller :hg:`update --clean .` för att\n"
-" ångra en sammanfogning som har lagt till fler föräldrar."
+" .. note::\n"
+" This command is most likely not what you are looking for.\n"
+" Revert will partially overwrite content in the working\n"
+" directory without changing the working directory parents. Use\n"
+" :hg:`update -r rev` to check out earlier revisions, or\n"
+" :hg:`update --clean .` to undo a merge which has added another\n"
+" parent."
+msgstr ""
+" .. note::\n"
+" Det här kommandot är troligtvis inte det du letar efter. Revert\n"
+" kommer att delvis skriva över innehåll i arbetskatalogen utan att\n"
+" ändra arbetskatalogens föräldrar. Använd :hg:`update -r rev` för att\n"
+" hämta ut tidigare revisioner, eller :hg:`update --clean .` för att\n"
+" ångra en sammanfogning som har lagt till fler föräldrar."
msgid ""
" With no revision specified, revert the named files or directories\n"
@@ -8153,6 +8460,9 @@
" För att låta servern välja ett ledigt portnummer att lyssna på, ange 0\n"
" som portnummer; då visar servern det portnummer som används."
+msgid "There is no Mercurial repository here (.hg not found)"
+msgstr "Det finns inget Mercurial-arkiv här (.hg hittades inte)"
+
#, python-format
msgid "listening at http://%s%s/%s (bound to %s:%d)\n"
msgstr "lyssnar på http://%s%s/%s (bunden till %s:%d)\n"
@@ -8182,15 +8492,17 @@
" inte bes om explicit med -u/--unknown eller -i/--ignored."
msgid ""
-" NOTE: status may appear to disagree with diff if permissions have\n"
-" changed or a merge has occurred. The standard diff format does not\n"
-" report permission changes and diff only reports changes relative\n"
-" to one merge parent."
-msgstr ""
-" NOTERA: status kan verka osams med diff om tillstånd har ändrat eller\n"
-" en sammanfogning har utförts. Det vanliga diff-formatet rapporterar\n"
-" inte förändringar av tillstånd och diff rapporterar bara ändringar\n"
-" relativt till en förälder vid sammanfogningar."
+" .. note::\n"
+" status may appear to disagree with diff if permissions have\n"
+" changed or a merge has occurred. The standard diff format does\n"
+" not report permission changes and diff only reports changes\n"
+" relative to one merge parent."
+msgstr ""
+" .. note::\n"
+" status kan verka osams med diff om tillstånd har ändrat eller en\n"
+" sammanfogning har utförts. Det vanliga diff-formatet rapporterar\n"
+" inte förändringar av tillstånd och diff rapporterar bara ändringar\n"
+" relativt till en förälder vid sammanfogningar."
msgid ""
" If one revision is given, it is used as the base revision.\n"
@@ -8460,17 +8772,20 @@
msgid ""
" Update the repository's working directory to the specified\n"
+" changeset. If no changeset is specified, update to the tip of the\n"
+" current named branch."
+msgstr ""
+" Uppdatera arkivets arbetskatalog till den angivna ändringen. Om ingen\n"
+" ändring anes, så uppdateras till toppen på den nuvarande namngivna\n"
+" grenen."
+
+msgid ""
+" If the changeset is not a descendant of the working directory's\n"
+" parent, the update is aborted. With the -c/--check option, the\n"
+" working directory is checked for uncommitted changes; if none are\n"
+" found, the working directory is updated to the specified\n"
" changeset."
-msgstr " Uppdatera arkivets arbetskatalog till den specificerade ändringen."
-
-msgid ""
-" If no changeset is specified, attempt to update to the tip of the\n"
-" current branch. If this changeset is a descendant of the working\n"
-" directory's parent, update to it, otherwise abort."
-msgstr ""
-" Om ingen ändring anges, kommer ett försök att göras för att hämta ut\n"
-" toppen på den nuvarande grenen. Om ändringen är en ättling till\n"
-" arbetskatalogens föräldrar, uppdatera till det, annars avbryt."
+msgstr ""
msgid ""
" The following rules apply when the working directory contains\n"
@@ -8515,15 +8830,15 @@
" Use null as the changeset to remove the working directory (like\n"
" :hg:`clone -U`)."
msgstr ""
-" Använd null som ändring för att radera arbetskatalogen (som :hg:`clone\n"
-" -U`)."
-
-msgid ""
-" If you want to update just one file to an older changeset, use :hg:"
-"`revert`."
-msgstr ""
-" Om du vill uppdatera bara en fil till en äldre ändring, använd :hg:"
-"`revert`."
+" Använd null som ändring för att radera arbetskatalogen (som\n"
+" :hg:`clone -U`)."
+
+msgid ""
+" If you want to update just one file to an older changeset, use\n"
+" :hg:`revert`."
+msgstr ""
+" Om du vill uppdatera bara en fil till en äldre ändring, använd\n"
+" :hg:`revert`."
msgid "cannot specify both -c/--check and -C/--clean"
msgstr ""
@@ -8697,6 +9012,9 @@
msgid "guess renamed files by similarity (0<=s<=100)"
msgstr "gissa omdöpta filer efter likhet (0<=s<=100)"
+msgid "recurse into subrepositories"
+msgstr "gå in i underarkiv"
+
msgid "[OPTION]... [FILE]..."
msgstr "[FLAGGA]... [FIL]..."
@@ -8980,20 +9298,23 @@
msgid "[OPTION]... PATTERN [FILE]..."
msgstr "[FLAGGA]... MÖNSTER [FIL]..."
-msgid "show only heads which are descendants of REV"
-msgstr "visa bara huvuden som har REV som anfader"
+msgid "show only heads which are descendants of STARTREV"
+msgstr "visa bara huvuden som är ättlingar till STARTREV"
+
+msgid "STARTREV"
+msgstr "STARTREV"
msgid "show topological heads only"
msgstr "visa bara topologiska huvuden"
-msgid "show active branchheads only [DEPRECATED]"
-msgstr "visa bara aktiva grenhuvuden [FÖRLEGAD]"
+msgid "show active branchheads only (DEPRECATED)"
+msgstr "visa bara aktiva grenhuvuden (FÖRLEGAD)"
msgid "show normal and closed branch heads"
msgstr "visa normala och stängda grenhuvuden"
-msgid "[-ac] [-r REV] [REV]..."
-msgstr "[-ac] [-r REV] [REV]..."
+msgid "[-ac] [-r STARTREV] [REV]..."
+msgstr "[-ac] [-r STARTREV] [REV]..."
msgid "[TOPIC]"
msgstr "[ÄMNE]"
@@ -9117,6 +9438,9 @@
msgid "force a merge with outstanding changes"
msgstr "tvinga en sammanfogning med utestående ändringar"
+msgid "specify merge tool"
+msgstr "ange sammanfogningsverktyg"
+
msgid "revision to merge"
msgstr "revision att sammanfoga"
@@ -9181,10 +9505,10 @@
msgstr "visa status för filer som behöver sammanfogas"
msgid "mark files as resolved"
-msgstr "markera filen som löst"
-
-msgid "unmark files as resolved"
-msgstr "avmarkera filen som löst"
+msgstr "markera filer som lösta"
+
+msgid "mark files as unresolved"
+msgstr "markera filer som olösta"
msgid "hide status prefix"
msgstr "göm statusprefix"
@@ -9228,8 +9552,8 @@
msgid "name to show in web pages (default: working directory)"
msgstr "namn att visa i webbsidor (standard: arbetskatalogen)"
-msgid "name of the hgweb config file (serve more than one repository)"
-msgstr "namn på webdir-konfigurationsfil (dela ut mer än ett arkiv)"
+msgid "name of the hgweb config file (see \"hg help hgweb\")"
+msgstr "namn på webdir-konfigurationsfil (se \"hg help hgweb\")"
msgid "name of the hgweb config file (DEPRECATED)"
msgstr "namn på webdir-konfigurationsfil (FÖRLEGAD)"
@@ -9321,8 +9645,8 @@
msgid "discard uncommitted changes (no backup)"
msgstr "kassera oarkiverade ändringar (ingen backup)"
-msgid "check for uncommitted changes"
-msgstr "leta efter icke arkiverade ändringar"
+msgid "update across branches if no uncommitted changes"
+msgstr ""
msgid "[-c] [-C] [-d DATE] [[-r] REV]"
msgstr "[-c] [-C] [-d DATUM] [[-r] REV]"
@@ -9334,6 +9658,10 @@
msgid "not found in manifest"
msgstr ""
+#, python-format
+msgid "no such file in rev %s"
+msgstr ""
+
msgid "branch name not in UTF-8!"
msgstr ""
@@ -9378,6 +9706,18 @@
msgstr ""
#, python-format
+msgid "invalid character in dag description: %s..."
+msgstr ""
+
+#, python-format
+msgid "expected id %i, got %i"
+msgstr ""
+
+#, python-format
+msgid "parent id %i is larger than current id %i"
+msgstr ""
+
+#, python-format
msgid "invalid event type in dag: %s"
msgstr ""
@@ -9442,24 +9782,24 @@
msgstr "arkivet är obesläktat"
#, python-format
-msgid "abort: push creates new remote heads on branch '%s'!\n"
-msgstr "avbryter: push skapar nya fjärrhuvuden på grenen '%s'!\n"
-
-msgid "abort: push creates new remote heads!\n"
-msgstr "avbryter: push skapar nya fjärrhuvuden!\n"
-
-msgid "(you should pull and merge or use push -f to force)\n"
-msgstr "(du kan dra och sammanfoga eller använda push -f för att tvinga)\n"
-
-msgid "(did you forget to merge? use push -f to force)\n"
-msgstr "(glömde du att sammanfoga? använd push -f för att tvinga)\n"
-
-#, python-format
-msgid "abort: push creates new remote branches: %s!\n"
-msgstr "avbryter: push skapar nya fjärrgrenar: %s!\n"
-
-msgid "(use 'hg push --new-branch' to create new remote branches)\n"
-msgstr "(använd 'hg push --new-branch' för att skapa nya fjärrgrenar)\n"
+msgid "push creates new remote branches: %s!"
+msgstr "push skapar nya fjärrhuvuden: %s!"
+
+msgid "use 'hg push --new-branch' to create new remote branches"
+msgstr "använd 'hg push --new-branch' för att skapa nya fjärrgrenar"
+
+#, python-format
+msgid "push creates new remote heads on branch '%s'!"
+msgstr "push skapar nya fjärrhuvuden på grenen '%s'!"
+
+msgid "push creates new remote heads!"
+msgstr "push skapar nya fjärrhuvuden!"
+
+msgid "you should pull and merge or use push -f to force"
+msgstr "du kan dra och sammanfoga eller använda push -f för att tvinga"
+
+msgid "did you forget to merge? use push -f to force"
+msgstr "glömde du att sammanfoga? använd push -f för att tvinga"
msgid "note: unsynced remote changes!\n"
msgstr "notera: osynkade fjärrändringar!\n"
@@ -9476,6 +9816,9 @@
msgid "hg: parse error: %s\n"
msgstr ""
+msgid "entering debugger - type c to continue starting hg or h for help\n"
+msgstr ""
+
#, python-format
msgid ""
"hg: command '%s' is ambiguous:\n"
@@ -9524,6 +9867,10 @@
msgid "hg: unknown command '%s'\n"
msgstr ""
+#, python-format
+msgid "(%s)\n"
+msgstr ""
+
msgid "(did you forget to compile extensions?)\n"
msgstr ""
@@ -9574,6 +9921,12 @@
msgstr ""
#, python-format
+msgid ""
+"error in definition for alias '%s': %s may only be given on the command "
+"line\n"
+msgstr ""
+
+#, python-format
msgid "alias '%s' resolves to unknown command '%s'\n"
msgstr ""
@@ -9593,10 +9946,10 @@
msgid "extension '%s' overrides commands: %s\n"
msgstr "utökningen '%s' tar över dessa kommandon: %s\n"
-msgid "Option --config may not be abbreviated!"
-msgstr ""
-
-msgid "Option --cwd may not be abbreviated!"
+msgid "option --config may not be abbreviated!"
+msgstr ""
+
+msgid "option --cwd may not be abbreviated!"
msgstr ""
msgid ""
@@ -9679,12 +10032,6 @@
msgid "was merge of '%s' successful (yn)?"
msgstr ""
-msgid "&No"
-msgstr ""
-
-msgid "&Yes"
-msgstr ""
-
#, python-format
msgid ""
" output file %s appears unchanged\n"
@@ -9695,8 +10042,11 @@
msgid "merging %s failed!\n"
msgstr ""
-#, python-format
-msgid "Inconsistent state, %s:%s is good and bad"
+msgid "starting revisions are not directly related"
+msgstr ""
+
+#, python-format
+msgid "inconsistent state, %s:%s is good and bad"
msgstr ""
#, python-format
@@ -9724,12 +10074,12 @@
msgid "Specifying Multiple Revisions"
msgstr "Ange Flera Revisioner"
-msgid "Specifying Revision Sets"
-msgstr "Ange Revisionsset"
-
msgid "Diff Formats"
msgstr "Diff-format"
+msgid "Merge Tools"
+msgstr "Sammanfogningsverktyg"
+
msgid "Template Usage"
msgstr "Användning Av Mallar"
@@ -9975,8 +10325,8 @@
msgid ""
"To make Mercurial produce the git extended diff format, use the --git\n"
"option available for many commands, or set 'git = True' in the [diff]\n"
-"section of your hgrc. You do not need to set this option when\n"
-"importing diffs in this format or using them in the mq extension.\n"
+"section of your configuration file. You do not need to set this option\n"
+"when importing diffs in this format or using them in the mq extension.\n"
msgstr ""
msgid ""
@@ -10001,8 +10351,8 @@
"HGEDITOR\n"
" Detta är namnet på editorn som ska köras vid arkivering. Se EDITOR."
-msgid " (deprecated, use .hgrc)"
-msgstr " (föråldrad, använd .hgrc)"
+msgid " (deprecated, use configuration file)"
+msgstr " (föråldrad, använd konfigurationsfilen)"
msgid ""
"HGENCODING\n"
@@ -10031,10 +10381,10 @@
msgid ""
"HGRCPATH\n"
-" A list of files or directories to search for hgrc files. Item\n"
-" separator is \":\" on Unix, \";\" on Windows. If HGRCPATH is not set,\n"
-" platform default search path is used. If empty, only the .hg/hgrc\n"
-" from the current repository is read."
+" A list of files or directories to search for configuration\n"
+" files. Item separator is \":\" on Unix, \";\" on Windows. If HGRCPATH\n"
+" is not set, platform default search path is used. If empty, only\n"
+" the .hg/hgrc from the current repository is read."
msgstr ""
msgid " For each element in HGRCPATH:"
@@ -10047,9 +10397,9 @@
msgid ""
"HGPLAIN\n"
-" When set, this disables any options in .hgrc that might change\n"
-" Mercurial's default output. This includes encoding, defaults,\n"
-" verbose mode, debug mode, quiet mode, tracebacks, and\n"
+" When set, this disables any configuration settings that might\n"
+" change Mercurial's default output. This includes encoding,\n"
+" defaults, verbose mode, debug mode, quiet mode, tracebacks, and\n"
" localization. This can be useful when scripting against Mercurial\n"
" in the face of existing user configuration."
msgstr ""
@@ -10067,7 +10417,7 @@
msgid ""
" - HGUSER (deprecated)\n"
-" - hgrc files from the HGRCPATH\n"
+" - configuration files from the HGRCPATH\n"
" - EMAIL\n"
" - interactive prompt\n"
" - LOGNAME (with ``@hostname`` appended)"
@@ -10132,12 +10482,13 @@
"upp till användaren att aktiverade utökningar om de behövs."
msgid ""
-"To enable the \"foo\" extension, either shipped with Mercurial or in\n"
-"the Python search path, create an entry for it in your hgrc, like\n"
-"this::"
+"To enable the \"foo\" extension, either shipped with Mercurial or in the\n"
+"Python search path, create an entry for it in your configuration file,\n"
+"like this::"
msgstr ""
"För att aktivera utökningen \"foo\", som endera levereras med Mercurial\n"
-"eller finns i Pythons sökväg, skapa en post för den i din hgrc, så här::"
+"eller finns i Pythons sökväg, skapa en post för den i din\n"
+"konfigurationsfil, så här::"
msgid ""
" [extensions]\n"
@@ -10157,11 +10508,11 @@
" minfunktion = ~/.hgext/minfunktion.py"
msgid ""
-"To explicitly disable an extension enabled in an hgrc of broader\n"
-"scope, prepend its path with !::"
-msgstr ""
-"För att explicit deaktivera en utökning som aktiverats i en hgrc med större\n"
-"omfång, börja dess sökväg med !::"
+"To explicitly disable an extension enabled in a configuration file of\n"
+"broader scope, prepend its path with !::"
+msgstr ""
+"För att explicit deaktivera en utökning som aktiverats i en\n"
+"konfigurationsfil med större omfång, börja dess sökväg med !::"
msgid ""
" [extensions]\n"
@@ -10199,7 +10550,7 @@
" a remote repository, since new heads may be created by these\n"
" operations. Note that the term branch can also be used informally\n"
" to describe a development process in which certain development is\n"
-" done independently of other development.This is sometimes done\n"
+" done independently of other development. This is sometimes done\n"
" explicitly with a named branch, but it can also be done locally,\n"
" using bookmarks or clones and anonymous branches."
msgstr ""
@@ -10239,6 +10590,21 @@
msgstr ""
msgid ""
+"Branch, inactive\n"
+" If a named branch has no topological heads, it is considered to be\n"
+" inactive. As an example, a feature branch becomes inactive when it\n"
+" is merged into the default branch. The :hg:`branches` command\n"
+" shows inactive branches by default, though they can be hidden with\n"
+" :hg:`branches --active`."
+msgstr ""
+
+msgid ""
+" NOTE: this concept is deprecated because it is too implicit.\n"
+" Branches should now be explicitly closed using :hg:`commit\n"
+" --close-branch` when they are no longer needed."
+msgstr ""
+
+msgid ""
"Branch, named\n"
" A collection of changesets which have the same branch name. By\n"
" default, children of a changeset in a named branch belong to the\n"
@@ -10294,8 +10660,8 @@
msgid ""
"Changeset id\n"
" A SHA-1 hash that uniquely identifies a changeset. It may be\n"
-" represented as either a \"long\" 40-byte hexadecimal string, or a\n"
-" \"short\" 12-byte hexadecimal string."
+" represented as either a \"long\" 40 hexadecimal digit string, or a\n"
+" \"short\" 12 hexadecimal digit string."
msgstr ""
msgid ""
@@ -10796,6 +11162,128 @@
"högra sidan. Det innebär att ``/foo/bar`` och ``foo/quux/baz`` kommer att\n"
"visas som ``bar``och ``quux/baz``.\n"
+msgid "To merge files Mercurial uses merge tools."
+msgstr ""
+
+msgid ""
+"A merge tool combines two different versions of a file into a merged\n"
+"file. Merge tools are given the two files and the greatest common\n"
+"ancestor of the two file versions, so they can determine the changes\n"
+"made on both branches."
+msgstr ""
+
+msgid "The merge tools are used both for :hg:`resolve` and :hg:`merge`."
+msgstr ""
+
+msgid ""
+"Usually, the merge tool tries to automatically, by combining all the\n"
+"non-overlapping changes that occurred separately in the two different\n"
+"evolutions of the same initial base file. Furthermore, some\n"
+"interactive merge programs make it easier to manually resolve\n"
+"conflicting merges, either in a graphical way, or by inserting some\n"
+"conflict markers. Mercurial does not include any interactive merge\n"
+"programs but relies on external tools for that. External merge tools\n"
+"and their properties and usage is configured in merge-tools section -\n"
+"see hgrc(5)."
+msgstr ""
+
+msgid ""
+"There are a some internal merge tools which can be used. The internal\n"
+"merge tools are:"
+msgstr ""
+
+msgid ""
+"``internal:merge``\n"
+" Uses the internal non-interactive merge tool for merging files."
+msgstr ""
+
+msgid ""
+"``internal:fail``\n"
+" Rather than attempting to merge files that were modified on both\n"
+" branches, it marks these files as unresolved. Then the resolve\n"
+" command must be used to mark files resolved."
+msgstr ""
+
+msgid ""
+"``internal:local``\n"
+" Uses the local version of files as the merged version."
+msgstr ""
+
+msgid ""
+"``internal:other``\n"
+" Uses the remote version of files as the merged version."
+msgstr ""
+
+msgid ""
+"``internal:prompt``\n"
+" Asks the user which of the local or the other version to keep as\n"
+" the merged version."
+msgstr ""
+
+msgid ""
+"``internal:dump``\n"
+" Creates three versions of the files to merge, containing the\n"
+" contents of local, other and base. These files can then be used to\n"
+" perform a merge manually. If the file merged is name ``a.txt``,\n"
+" these files will accordingly be named ``a.txt.local``,\n"
+" ``a.txt.other`` and ``a.txt.base`` and they will be placed in the\n"
+" same directory as the file to merge."
+msgstr ""
+
+msgid "How Mercurial decides which merge program to use"
+msgstr ""
+
+msgid ""
+"1. If the ``HGMERGE`` environment variable is present, it is used. If\n"
+" specified it must be either an executable path or the name of an\n"
+" application in your executable search path."
+msgstr ""
+
+msgid ""
+"2. If the filename of the file to be merged matches any of the\n"
+" patterns in the merge-patterns configuration section, then the\n"
+" corresponding merge tool is used, unless the file to be merged is a\n"
+" symlink. Here binary capabilities of the merge tool are not\n"
+" considered."
+msgstr ""
+
+msgid "3. If ui.merge is set, it is used."
+msgstr ""
+
+msgid ""
+"4. If any merge tools are present in the merge-tools configuration\n"
+" section, and any of the tools can be found on the system, the\n"
+" priority settings are used to determine which one to use. Binary,\n"
+" symlink and GUI capabilities do also have to match."
+msgstr ""
+
+msgid "5. If a program named ``hgmerge`` exists on the system, it is used."
+msgstr ""
+
+msgid ""
+"6. If the file to be merged is not binary and is not a symlink, then\n"
+" ``internal:merge`` is used."
+msgstr ""
+
+msgid "7. The merge fails."
+msgstr ""
+
+msgid ""
+".. note::\n"
+" After selecting a merge program, Mercurial will by default attempt\n"
+" to merge the files using a simple merge algorithm first, to see if\n"
+" they can be merged without conflicts. Only if there are conflicting\n"
+" changes Mercurial will actually execute the merge program. Whether\n"
+" to use the simple merge algorithm first can be controlled be the\n"
+" premerge setting of the merge tool, which is enabled by default\n"
+" unless the file is binary or symlink."
+msgstr ""
+
+msgid ""
+"See the merge-tools and ui sections of hgrc(5) for details on\n"
+"configuration of merge tools.\n"
+msgstr ""
+
msgid ""
"When Mercurial accepts more than one revision, they may be specified\n"
"individually, or provided as a topologically continuous range,\n"
@@ -10984,8 +11472,13 @@
"Identifiers such as branch names must be quoted with single or double\n"
"quotes if they contain characters outside of\n"
"``[._a-zA-Z0-9\\x80-\\xff]`` or if they match one of the predefined\n"
-"predicates. Special characters can be used in quoted identifiers by\n"
-"escaping them, e.g., ``\\n`` is interpreted as a newline."
+"predicates."
+msgstr ""
+
+msgid ""
+"Special characters can be used in quoted identifiers by escaping them,\n"
+"e.g., ``\\n`` is interpreted as a newline. To prevent them from being\n"
+"interpreted, strings can be prefixed with ``r``, e.g. ``r'...'``."
msgstr ""
msgid "There is a single prefix operator:"
@@ -11063,8 +11556,7 @@
msgid ""
"``branch(set)``\n"
-" The branch names are found for changesets in set, and the result is\n"
-" all changesets belonging to one those branches."
+" All changesets belonging to the branches of changesets in set."
msgstr ""
msgid ""
@@ -11089,12 +11581,12 @@
msgid ""
"``descendants(set)``\n"
-" Changesets which are decendants of changesets in set."
+" Changesets which are descendants of changesets in set."
msgstr ""
msgid ""
"``file(pattern)``\n"
-" Changesets which manually affected files matching pattern."
+" Changesets affecting files matched by pattern."
msgstr ""
msgid ""
@@ -11104,12 +11596,13 @@
msgid ""
"``grep(regex)``\n"
-" Like ``keyword(string)`` but accepts a regex."
+" Like ``keyword(string)`` but accepts a regex. Use ``grep(r'...')``\n"
+" to ensure special escape characters are handled correctly."
msgstr ""
msgid ""
"``head()``\n"
-" Changeset is a head."
+" Changeset is a named branch head."
msgstr ""
msgid ""
@@ -11118,6 +11611,11 @@
msgstr ""
msgid ""
+"``id(string)``\n"
+" Revision non-ambiguously specified by the given hex string prefix"
+msgstr ""
+
+msgid ""
"``keyword(string)``\n"
" Search commit message, user name, and names of changed files for\n"
" string."
@@ -11134,18 +11632,24 @@
msgstr ""
msgid ""
+"``min(set)``\n"
+" Changeset with lowest revision number in set."
+msgstr ""
+
+msgid ""
"``merge()``\n"
" Changeset is a merge changeset."
msgstr ""
msgid ""
"``modifies(pattern)``\n"
-" Changesets which modify files matching pattern."
+" Changesets modifying files matched by pattern."
msgstr ""
msgid ""
"``outgoing([path])``\n"
-" Changesets missing in path."
+" Changesets not found in the specified destination repository, or the\n"
+" default push location."
msgstr ""
msgid ""
@@ -11164,11 +11668,22 @@
msgstr ""
msgid ""
+"``present(set)``\n"
+" An empty set, if any revision in set isn't found; otherwise,\n"
+" all revisions in set."
+msgstr ""
+
+msgid ""
"``removes(pattern)``\n"
" Changesets which remove files matching pattern."
msgstr ""
msgid ""
+"``rev(number)``\n"
+" Revision with the given numeric identifier."
+msgstr ""
+
+msgid ""
"``reverse(set)``\n"
" Reverse order of set."
msgstr ""
@@ -11196,8 +11711,8 @@
msgstr ""
msgid ""
-"``tagged()``\n"
-" Changeset is tagged."
+"``tag(name)``\n"
+" The specified tag by name, or all tagged revisions if no name is given."
msgstr ""
msgid ""
@@ -11219,15 +11734,49 @@
" -l x -> limit(expr, x)"
msgstr ""
-msgid "Some sample queries::"
-msgstr ""
-
-msgid ""
-" hg log -r 'branch(default)'\n"
-" hg log -r 'branch(default) and 1.5:: and not merge()'\n"
-" hg log -r '1.3::1.5 and keyword(bug) and file(\"hgext/*\")'\n"
-" hg log -r 'sort(date(\"May 2008\"), user)'\n"
-" hg log -r '(keyword(bug) or keyword(issue)) and not ancestors(tagged())'\n"
+msgid "Some sample queries:"
+msgstr ""
+
+msgid "- Changesets on the default branch::"
+msgstr "- Ändringar på default-grenen::"
+
+msgid " hg log -r 'branch(default)'"
+msgstr " hg log -r 'branch(default)'"
+
+msgid "- Changesets on the default branch since tag 1.5 (excluding merges)::"
+msgstr ""
+
+msgid " hg log -r 'branch(default) and 1.5:: and not merge()'"
+msgstr ""
+
+msgid "- Open branch heads::"
+msgstr "- Öppna grenhuvuden::"
+
+msgid " hg log -r 'head() and not closed()'"
+msgstr ""
+
+msgid ""
+"- Changesets between tags 1.3 and 1.5 mentioning \"bug\" that affect\n"
+" ``hgext/*``::"
+msgstr ""
+
+msgid " hg log -r '1.3::1.5 and keyword(bug) and file(\"hgext/*\")'"
+msgstr ""
+
+msgid "- Changesets in committed May 2008, sorted by user::"
+msgstr ""
+
+msgid " hg log -r 'sort(date(\"May 2008\"), user)'"
+msgstr ""
+
+msgid ""
+"- Changesets mentioning \"bug\" or \"issue\" that are not in a tagged\n"
+" release::"
+msgstr ""
+
+msgid ""
+" hg log -r '(keyword(bug) or keyword(issue)) and not ancestors(tagged"
+"())'\n"
msgstr ""
msgid ""
@@ -11276,6 +11825,9 @@
" committed. Will be empty if the branch name was default."
msgstr ""
+msgid ":children: List of strings. The children of the changeset."
+msgstr ""
+
msgid ":date: Date information. The date when the changeset was committed."
msgstr ""
@@ -11312,8 +11864,8 @@
msgstr ""
msgid ""
-":node: String. The changeset identification hash, as a 40-character\n"
-" hexadecimal string."
+":node: String. The changeset identification hash, as a 40 hexadecimal\n"
+" digit string."
msgstr ""
msgid ":parents: List of strings. The parents of the changeset."
@@ -11394,6 +11946,11 @@
" and \">\" with XML entities."
msgstr ""
+msgid ""
+":hex: Any text. Convert a binary Mercurial node identifier into\n"
+" its long hexadecimal representation."
+msgstr ""
+
msgid ":fill68: Any text. Wraps the text to fit in 68 columns."
msgstr ""
@@ -11445,12 +12002,17 @@
msgid ""
":short: Changeset hash. Returns the short form of a changeset hash,\n"
-" i.e. a 12-byte hexadecimal string."
+" i.e. a 12 hexadecimal digit string."
msgstr ""
msgid ":shortdate: Date. Returns a date like \"2006-09-18\"."
msgstr ""
+msgid ""
+":stringify: Any type. Turns the value into text by converting values into\n"
+" text and concatenating them."
+msgstr ""
+
msgid ":strip: Any text. Strips all leading and trailing whitespace."
msgstr ""
@@ -11496,6 +12058,11 @@
"server."
msgstr ""
+msgid ""
+"Note that the security of HTTPS URLs depends on proper configuration of\n"
+"web.cacerts."
+msgstr ""
+
msgid "Some notes about using SSH with Mercurial:"
msgstr ""
@@ -11522,13 +12089,13 @@
msgstr ""
msgid ""
-" Alternatively specify \"ssh -C\" as your ssh command in your hgrc or\n"
-" with the --ssh command line option."
-msgstr ""
-
-msgid ""
-"These URLs can all be stored in your hgrc with path aliases under the\n"
-"[paths] section like so::"
+" Alternatively specify \"ssh -C\" as your ssh command in your\n"
+" configuration file or with the --ssh command line option."
+msgstr ""
+
+msgid ""
+"These URLs can all be stored in your configuration file with path\n"
+"aliases under the [paths] section like so::"
msgstr ""
msgid ""
@@ -11618,7 +12185,7 @@
msgstr ""
msgid ""
-"use 'hg resolve' to retry unresolved file merges or 'hg update -C' to "
+"use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to "
"abandon\n"
msgstr ""
@@ -11629,6 +12196,10 @@
msgid "error reading %s/.hg/hgrc: %s\n"
msgstr ""
+#, python-format
+msgid "error accessing repository at %s\n"
+msgstr ""
+
msgid "SSL support is unavailable"
msgstr ""
@@ -11733,24 +12304,9 @@
msgid "'%s' uses newer protocol %s"
msgstr ""
-msgid "look up remote revision"
-msgstr ""
-
-msgid "unexpected response:"
-msgstr ""
-
-msgid "look up remote changes"
-msgstr ""
-
-msgid "push failed (unexpected response):"
-msgstr ""
-
-msgid "remote: "
-msgstr "fjärr: "
-
#, python-format
msgid "push failed: %s"
-msgstr ""
+msgstr "tryckning misslyckades: %s"
msgid "Python support for SSL and HTTPS is not installed"
msgstr ""
@@ -11874,10 +12430,10 @@
msgstr "efterfrågar alla ändringar\n"
msgid ""
-"Partial pull cannot be done because other repository doesn't support "
+"partial pull cannot be done because other repository doesn't support "
"changegroupsubset."
msgstr ""
-"Deldragningar kan inte göras eftersom det andra arkivet inte stödjer "
+"deldragningar kan inte göras eftersom det andra arkivet inte stödjer "
"changegroupsubset."
#, python-format
@@ -11903,9 +12459,6 @@
msgid "adding changesets\n"
msgstr "lägger till ändringar\n"
-msgid "changesets"
-msgstr "ändringar"
-
msgid "received changelog group is empty"
msgstr "mottagen ändringsgrupp är tom"
@@ -11956,8 +12509,8 @@
msgid "transferred %s in %.1f seconds (%s/sec)\n"
msgstr "överförde %s på %.1f sekunder (%s/sek)\n"
-msgid "no [smtp]host in hgrc - cannot send mail"
-msgstr "ingen [smtp]server i hgrc - kan inte sända mail"
+msgid "smtp.host not configured - cannot send mail"
+msgstr "smtp.host är inte konfigurerad - kan inte sända mail"
#, python-format
msgid "sending mail: smtp host %s, port %s\n"
@@ -12001,6 +12554,13 @@
msgstr ""
#, python-format
+msgid "invalid pattern (%s): %s"
+msgstr "ogiltigt mönster (%s): %s"
+
+msgid "invalid pattern"
+msgstr "ogiltigt mönster"
+
+#, python-format
msgid "diff context lines count must be an integer, not %r"
msgstr ""
@@ -12058,23 +12618,23 @@
#, python-format
msgid "update failed to remove %s: %s!\n"
-msgstr ""
+msgstr "update kunde inte ta bort %s: %s!\n"
#, python-format
msgid "getting %s\n"
-msgstr ""
+msgstr "hämtar %s\n"
#, python-format
msgid "getting %s to %s\n"
-msgstr ""
-
-#, python-format
-msgid "warning: detected divergent renames of %s to:\n"
-msgstr ""
+msgstr "hämtar %s till %s\n"
+
+#, python-format
+msgid "note: possible conflict - %s was renamed multiple times to:\n"
+msgstr "notera: möjlig konflikt - %s döptes om flera gånger till:\n"
#, python-format
msgid "branch %s not found"
-msgstr ""
+msgstr "grenen %s hittades inte"
msgid "merging with a working directory ancestor has no effect"
msgstr ""
@@ -12085,13 +12645,38 @@
msgid "outstanding uncommitted changes (use 'hg status' to list changes)"
msgstr ""
-msgid ""
-"crosses branches (use 'hg merge' to merge or use 'hg update -C' to discard "
-"changes)"
-msgstr ""
-
-msgid "crosses branches (use 'hg merge' or use 'hg update -c')"
-msgstr ""
+msgid "crosses branches (merge branches or use --clean to discard changes)"
+msgstr ""
+
+msgid "crosses branches (merge branches or use --check to force update)"
+msgstr ""
+
+msgid "Attention:"
+msgstr ""
+
+msgid "Caution:"
+msgstr ""
+
+msgid "!Danger!"
+msgstr ""
+
+msgid "Error:"
+msgstr "Fel:"
+
+msgid "Hint:"
+msgstr ""
+
+msgid "Important:"
+msgstr "Viktigt:"
+
+msgid "Note:"
+msgstr "Notera:"
+
+msgid "Tip:"
+msgstr "Tips:"
+
+msgid "Warning!"
+msgstr "Varning!"
#, python-format
msgid "cannot create %s: destination already exists"
@@ -12168,17 +12753,11 @@
msgstr ""
#, python-format
-msgid "Unsupported line endings type: %s"
-msgstr ""
-
-msgid ""
-"internal patcher failed\n"
-"please report details to http://mercurial.selenic.com/bts/\n"
-"or mercurial@selenic.com\n"
-msgstr ""
-"den interna patcharen misslyckades\n"
-"rapportera detaljer till http://mercurial.selenic.com/bts/\n"
-"eller mercurial@selenic.com\n"
+msgid "unsupported line endings type: %s"
+msgstr ""
+
+msgid "patch failed to apply"
+msgstr ""
#, python-format
msgid " %d files changed, %d insertions(+), %d deletions(-)\n"
@@ -12251,12 +12830,12 @@
msgid "%s not found in the transaction"
msgstr ""
+msgid "consistency error in delta"
+msgstr ""
+
msgid "unknown base"
msgstr ""
-msgid "consistency error adding group"
-msgstr ""
-
msgid "unterminated string"
msgstr ""
@@ -12277,17 +12856,32 @@
msgid "not a function: %s"
msgstr "inte en funktion: %s"
-msgid "limit wants two arguments"
-msgstr "limit vill ha två argument"
-
-msgid "limit wants a number"
-msgstr "limit vill ha ett nummer"
+msgid "id requires one argument"
+msgstr "id kräver ett argument"
+
+msgid "id requires a string"
+msgstr "id kräver en sträng"
+
+msgid "rev requires one argument"
+msgstr "rev kräver ett argument"
+
+msgid "rev requires a number"
+msgstr "rev kräver ett nummer"
+
+msgid "rev expects a number"
+msgstr "rev förväntar sig ett nummer"
+
+msgid "limit requires two arguments"
+msgstr "limit kräver två argument"
+
+msgid "limit requires a number"
+msgstr "limit kräver ett nummer"
msgid "limit expects a number"
msgstr "limit förväntar sig ett nummer"
-msgid "ancestor wants two arguments"
-msgstr "ancestor vill ha två argument"
+msgid "ancestor requires two arguments"
+msgstr "ancestor kräver två argument"
msgid "ancestor arguments must be single revisions"
msgstr "argument till ancestor måste vara singelrevisioner"
@@ -12295,32 +12889,36 @@
msgid "follow takes no arguments"
msgstr "follow tar inga argument"
-msgid "date wants a string"
-msgstr "date vill ha en sträng"
-
-msgid "keyword wants a string"
-msgstr "keyword vill ha en sträng"
-
-msgid "grep wants a string"
-msgstr "grep vill ha en sträng"
-
-msgid "author wants a string"
-msgstr "author vill ha ett mönster"
-
-msgid "file wants a pattern"
-msgstr "file vill ha ett mönster"
-
-msgid "contains wants a pattern"
-msgstr "contains vill ha ett mönster"
-
-msgid "modifies wants a pattern"
-msgstr "modifies vill ha ett mönster"
-
-msgid "adds wants a pattern"
-msgstr "adds vill ha ett mönster"
-
-msgid "removes wants a pattern"
-msgstr "removes vill ha ett mänster"
+msgid "date requires a string"
+msgstr "date kräver en sträng"
+
+msgid "keyword requires a string"
+msgstr "keyword kräver en sträng"
+
+msgid "grep requires a string"
+msgstr "grep kräver en sträng"
+
+#, python-format
+msgid "invalid match pattern: %s"
+msgstr "ogiltigt träffmönster: %s"
+
+msgid "author requires a string"
+msgstr "author kräver en sträng"
+
+msgid "file requires a pattern"
+msgstr "file kräver ett mönster"
+
+msgid "contains requires a pattern"
+msgstr "contains kräver ett mönster"
+
+msgid "modifies requires a pattern"
+msgstr "modifies kräver ett mönster"
+
+msgid "adds requires a pattern"
+msgstr "adds kräver ett mönster"
+
+msgid "removes requires a pattern"
+msgstr "removes kräver ett mänster"
msgid "merge takes no arguments"
msgstr "merge tar inga argument"
@@ -12331,8 +12929,8 @@
msgid "head takes no arguments"
msgstr "head tar inga argument"
-msgid "sort wants one or two arguments"
-msgstr "sort vill ha ett eller två argument"
+msgid "sort requires one or two arguments"
+msgstr "sort kräver ett eller två argument"
msgid "sort spec must be a string"
msgstr "sort-spec måste vara en sträng"
@@ -12344,11 +12942,14 @@
msgid "all takes no arguments"
msgstr "all tar inga argument"
-msgid "outgoing wants a repository path"
-msgstr "outgoing vill ha en arkivsökväg"
-
-msgid "tagged takes no arguments"
-msgstr "tagged tar inga argument"
+msgid "outgoing requires a repository path"
+msgstr "outgoing kräver en arkivsökväg"
+
+msgid "tag takes one or no arguments"
+msgstr "tag tar ett eller inga argument"
+
+msgid "the argument to tag must be a string"
+msgstr "argumentet till tag måste vara en sträng"
msgid "can't negate that"
msgstr "kan inte negera det"
@@ -12357,17 +12958,17 @@
msgstr "inte en symbol"
msgid "empty query"
-msgstr ""
+msgstr "tom fråga"
msgid "searching for exact renames"
-msgstr ""
+msgstr "söker efter exakta namnbyten"
msgid "searching for similar files"
msgstr "söker efter liknande filer"
#, python-format
msgid "%s looks like a binary file."
-msgstr ""
+msgstr "%s verkar vara en binärfil."
msgid "can only specify two labels."
msgstr ""
@@ -12385,13 +12986,16 @@
msgid "no suitable response from remote hg"
msgstr ""
+msgid "remote: "
+msgstr "fjärr: "
+
+msgid "unexpected response:"
+msgstr "oväntat svar:"
+
#, python-format
msgid "push refused: %s"
msgstr ""
-msgid "unsynced changes"
-msgstr ""
-
#, python-format
msgid "'%s' does not appear to be an hg repository"
msgstr ""
@@ -12414,6 +13018,10 @@
msgstr ""
#, python-format
+msgid "bad subrepository pattern in %s: %s"
+msgstr ""
+
+#, python-format
msgid ""
" subrepository sources for %s differ\n"
"use (l)ocal source (%s) or (r)emote source (%s)?"
@@ -12435,10 +13043,18 @@
msgstr ""
#, python-format
+msgid "default path for subrepository %s not found"
+msgstr ""
+
+#, python-format
msgid "unknown subrepo type %s"
msgstr ""
#, python-format
+msgid "warning: error \"%s\" in subrepository \"%s\"\n"
+msgstr ""
+
+#, python-format
msgid "removing subrepo %s\n"
msgstr ""
@@ -12468,6 +13084,9 @@
msgid "node '%s' is not well formed"
msgstr ""
+msgid ".hg/tags.cache is corrupt, rebuilding it\n"
+msgstr ".hg/tags.cache är korrupt, bygger om den\n"
+
msgid "unmatched quotes"
msgstr ""
@@ -12512,6 +13131,10 @@
msgstr ""
#, python-format
+msgid "(deprecated '%%' in path %s=%s from %s)\n"
+msgstr "(föråldrad '%%' i sökvägen %s=%s från %s)\n"
+
+#, python-format
msgid "ignoring untrusted configuration option %s.%s = %s\n"
msgstr ""
@@ -12533,10 +13156,6 @@
msgid "username %s contains a newline\n"
msgstr ""
-#, python-format
-msgid "(deprecated '%%' in path %s=%s from %s)\n"
-msgstr "(föråldrad '%%' i sökvägen %s=%s från %s)\n"
-
msgid "response expected"
msgstr ""
@@ -12577,12 +13196,23 @@
msgid "certificate checking requires Python 2.6"
msgstr "certifikatkontroll kräver Python 2.6"
-msgid "server identity verification succeeded\n"
-msgstr "verifiering av serveridentitet lyckades\n"
+msgid "no certificate received"
+msgstr "inget certifikat mottaget"
+
+#, python-format
+msgid "certificate is for %s"
+msgstr "certifikat är för %s"
+
+msgid "no commonName found in certificate"
+msgstr "inget commonName hittades i certifikat"
+
+#, python-format
+msgid "%s certificate error: %s"
+msgstr "%s certifikatfel: %s"
#, python-format
msgid "command '%s' failed: %s"
-msgstr ""
+msgstr "kommandot '%s' misslyckades: %s"
#, python-format
msgid "path contains illegal component: %s"
@@ -12604,8 +13234,8 @@
msgstr ""
#, python-format
-msgid "invalid date: %r "
-msgstr ""
+msgid "invalid date: %r"
+msgstr "ogiltigt datum: %r"
#, python-format
msgid "date exceeds 32 bits: %d"
@@ -12659,6 +13289,10 @@
msgid "%.0f bytes"
msgstr ""
+#, python-format
+msgid "no port number associated with service '%s'"
+msgstr ""
+
msgid "cannot verify bundle or remote repos"
msgstr ""
@@ -12723,6 +13357,9 @@
msgid "checking changesets\n"
msgstr "kontrollerar ändringar\n"
+msgid "checking"
+msgstr "kontrollerar"
+
#, python-format
msgid "unpacking changeset %s"
msgstr "packar upp ändringen %s"
@@ -12764,9 +13401,6 @@
msgid "cannot decode filename '%s'"
msgstr "kan inte avkoda filnamnet '%s'"
-msgid "checking"
-msgstr "kontrollerar"
-
#, python-format
msgid "broken revlog! (%s)"
msgstr "skadad revlog! (%s)"
@@ -12828,3 +13462,15 @@
msgid "user name not available - set USERNAME environment variable"
msgstr "användarnamnet är inte tillgängligt - sätt miljövariabeln USERNAME"
+
+msgid "look up remote revision"
+msgstr "söker fjärrevision"
+
+msgid "look up remote changes"
+msgstr "söker fjärrändringar"
+
+msgid "push failed:"
+msgstr "tryckning misslyckades:"
+
+msgid "push failed (unexpected response):"
+msgstr "tryckning misslyckades (oväntat svar):"